AUXILIARY CONTROL CONSOLE

AUXILIARY CONTROL CONSOLE

AUXILIARY CONTROL CONSOLE

EXTERIOR LIGHTS

The two position switch is used to turn the exterior lights ON and OFF.

TRAIL CABLE TRIP PUSH-BUTTON

The large mushroom head push-button is used to completely cut power to the entire machine. Pressing the TRAIL CABLE TRIP button will disable power to the drill from its source.

CAUTION: PRESSING THIS BUTTON WHEN ANY DRIVE IS IN MOTION MAY RESULT IN COMPONENT DAMAGE.

FLOOR DEFROST SWITCH

The floor defrost switch is a two-position switch used to turn the heater ON or OFF.

HEATER / VENT / AIR CONDITIONER CONTROLS

The heater/vent/air conditioner controls consist of three controls.

The HVAC control switch selects the mode being used and has the following positions: OFF, FAN, HEAT, and COOL. A temperature rheostat is used to adjust cab air temperature.

The fan speed switch controls air circulation. The three positions are: OFF, LOW and HIGH.

BOARDING STAIRS SWITCH

The boarding stairs switch is a two-position switch. A similar switch is located at the stairs. Depending upon the position of the stairs, the switch must be moved from its present position to the opposite position for the stairs to change position.

RADIO / CD PLAYER

The AM/FM radio receiver includes a stereo CD player.