Initiate a lock on rear AFC advance

WARNING

Mine safety procedures in regards to shield movement MUST be observed.

If a lock on push is initiated in a Shield the Rear Conveyor ram will pull the Rear AFC until the ram stroke meets the target ‘RCP LockOnP. Ext’ or until the ‘RCP LockOnP.tmo’ timer expires.

1. Press

The default display will prompt the operator to activate the lock on pull.

2. Press to activate the lock on pull.

3. Press to turn off the lock on pull.

Press to stop the Lock on pull at anytime.

RCP LockOnPull OFF ON r100 c100 s100 SA-Idle

NOTICE

During a lock on pull all ram stroke protection may be disabled. Use of lock on pull can result in damage to the equipment.