Initiate an adjacent group conveyor pullback

WARNING

Mine safety procedures in regards to shield movement MUST be observed.

1. Press to select Conveyor Pullback Operation.

2. Select the side you want the function to operate with the or key.

The display shows Conveyor Pullback will start at Shield 17 and work towards Shield 17 and stroke will be 0% after Pull Back.

3. Pressing , the operator can toggle between the directions that the group function will operate.

4. Press to begin the conveyor pullback.

Press to stop the Conveyor Pullback at anytime.

Target Extension Direction

CP: 0 36 < 17 r2 c100 s100 SA-Idle

NOTICE

Global parameters in the conveyor pullback menu determine the adjacent group size ‘CP group’ and the target extension ‘CP extens’. These are configurable under Level 1 password control.