OPERATING INSTRUCTIONS RH120E Operation
Do not run engines at full load unless they have been allowed to run for at least 3 minutes at idling.
Locate the cause of the fault and rectify before restarting the engine.
Repeat the starting procedure if one of the engines does not fire. Repeat starting procedure not more often than three to four times. Do not operate the starter for more than 10 seconds. If, after starting, the BCS (2, Fig. 2-77:) indicates a fault of the PMS
because of insufficient engine oil pressure
of the alternator Fig. 2-77:
stop the engine concerned immediately.
BA RH120E(3 725 023.00)-EN
2-63
