BI619362
Bucyrus International, Inc. 8750 Walking Dragline
•
After servicing, be sure all tools, parts or servicing equipment are removed from the machine and secured in an appropriate storage area.
•
Mechanical Brakes are designed for use as static holding brakes only. Use them as a motion (dynamic) brake in emergency situations only.
•
Use proper interior and exterior lighting.
•
Install and maintain proper grounding and ground fault protection systems.
•
Perform functional tests of all safety circuits.
•
Electrical inspection and maintenance should only be performed by a qualified electrician.
•
National, state and site safety systems must be read in conjunction with this manual
MAINTENANCE SAFETY PRECAUTIONS •
Do not wear rings, wristwatches or loose fitting clothing when working on machinery. They could get caught on moving parts causing serious injury.
•
Always wear a fall arrest device or harness when the danger of falling exists.
•
If a lifeline is used when working in confined spaces, always have a second person monitoring it.
•
Do not start an engine indoors unless adequate exhaust ventilators are provided and in operation.
•
Never utilize the machine air or hydraulic systems for support when working on the machine. Deactivate or isolate the entire system prior to performing maintenance.
•
Equipment should be parked on level ground at all times during machine servicing and periods of idleness.
•
Cranes and hoists must be of sufficient capacity to lift the heavier components (gearcases, etc.) Always work within the limitations of the equipment being utilized.
•
Be sure heavy items are properly rigged and supported from cranes or hoists before removing supporting members from the machine.
Manual No. 10764
1-6
August 2009
