Left Hand Console Controls

LEFT HAND CONSOLE CONTROLS

Left Hand Console Controls

EARTH CONTINUITY LOCKOUT

A 2-position, lockable, pushbutton used for Safety Lockout and Ground Test. WINDSHIELD WIPER

A 3-position switch to control the operator’s cab wiper and speed (Off, Low, High). WINDSHIELD WASHER

A pushbutton to operate the windshield washer pump. ROPE LIMIT BYPASS

A pushbutton used to back out of a final hoist, drag or tightline limit. A light will flash in a first stage limit and light steadily on a shutdown. SHOE AUTOPARK

A green illuminated pushbutton used to initiate the automatic parking function. When lit it indicates that the walking shoes are in their PARKED position. When flashing it indicates the shoe park is operating. See OPERATING WALKING MACHINERY in this section. CABIN LIGHTS

A 3-way dimmer switch used to control the interior cab lights. TEMPERATURE

A rheostat used to set the desired temperature for the operator’s cab heater or air conditioner unit (Cold to Hot). COMFORT MODE HVAC

A 3-position selector switch used to set the heating or cooling mode for the operator’s cab heater or air conditioner unit (Vent, Heat, Cool). FAIRLEAD LIGHT SWITCH

A 2-position ON-OFF switch. BOARDING LIGHT SWITCH

A 2-position ON-OFF switch. HVAC FAN SPEED

A 3-position selector switch used to set the fan speed for the operator’s cab heater or air conditioner unit (Off, Low, High). ROPE CALIBRATION

A keyed 2-position switch to run or set-up the rope calibration.