OPERATING INSTRUCTIONS RH 120 E Repair work SAFETY INSTRUCTIONS FOR EXCAVATORS WITH ELECTRIC MOTOR
Connect the earthing kit (8) to the earthing points (2, 3 and 4) only by means of extension (5).
Repair work on electrical systems may only be performed by qualified electricians or by workshops employing such personnel.
The earthing points may still carry residual voltages.
A qualified electrician for the purpose of this regulation is a person who has the corresponding technical training, know-how and experience as well as knowledge of the pertinent prescriptions and who is therefore in a position to judge the work entrusted to him and the potential dangers in connection therewith. Before carrying out any repair work on the electrical system, the following precautions must be taken:
In the transformer station Ü Cut out the supply voltage Ü Secure against switching on; apply a warning sign Ü Check that the electrical system is off circuit
Fig. 4-1:
Ü Connect to earth and short-circuit Ü Protect adjacent and live parts against accidental contact
On the excavator Ü Cut out the switch-disconnector (see the " Switching off the circuit breaker " chapter in part 2 of the present operating instructions) Ü Secure against switching on; apply a warning sign Ü Remove the cover (1, Fig. 3-1:) Ü Check that the electrical system is off circuit and dead §
Fig. 4-2:
Connect to earth and short-circuit (connect the earthing and short-circuiting line (8, Fig. 3-2:) in the following order to points (1 – 4): to the fixed point (1) one after another to the earthing points (2, 3 and 4)
Ü slide partition (6, Fig. 3-3:) into guide (7)
Fig. 4-3:
BA RH120E(3 664 090.00)-EN
4-3
