OPERATING INSTRUCTIONS RH 40 E Inspection and servicing Plan A - after every 250 OH (at 250, 750, 1250 ... OH)
Plan B - after every 500 OH (at 500, 1500, 2500 ... OH)
Plan C - after every 1000 OH (at 1000, 2000, 3000, 4000 ... OH)
Plan D - after every 5000 OH (at 5000, 15000, 25000 ... OH)
Plan E - after every 10000 OH (at 10000, 20000, 30000, ... OH) Page 2 von 4 Location
Servicing work
Menge / No.
Cooling system Water filter Radiator - Check tightness - Fastening screws - Rubber bearing Cooling liquid Anti-freeze Lines Hose clamps Fuel system Fuel filter Tank breather valve Water trap (optional) - Filter Air-intake system Main filter element
Inspect visually for leaks Check / replace Replace
Check tightness Check condition Check DCA4-concentration Change Check Check for leaks Check tightness
1
Replace Clean Clean Change
2 1 1 1
Check / replace
2 2
Safety filter element
Replace
Air-intake line and clean-air line Hoses
Check for tightness and leaks Replace
Electrical system Battery cable connections
Check for tightness
Battery
Check fluid level
5
1 1
Plan Plan Plan Plan Plan B A C D E # #
# #
#
# # #
# # #
# # #
# # #
# # #
# # #
# # #
# # # # # # # # # # #
5
#
#
#
#
#
# #
# # # #
6
#
#
#
7
#
#
#
#
#
#
#
#
# #
# #
# 2
# #
# #
Cooling-liquid replacement after 2 years at the latest
6
Replacement of safety filter element after one year resp. after 3 cleaning cycles of the main filter element at the latest.
7
Unless it is regulary analyzed, the hydraulic oil must be changed every 5000 OH or after 3 years at the latest
3-22
BA RH40E(3 666 320.00)-EN
