HYDRAULIC CONNECTION

Hydraulic connection

Danger Before making the connection, make sure that machine motor is at a standstill and the hydraulic system is de-pressurised.

The equipment to be connected is supplied with a range of flexible “Delivery” and “Return” hoses with different quick couplings. To avoid damaging the distributor, the delivery circuit is installed with a check valve preventing oil back flow.

Danger Do not reverse delivery and return pipes upon installation or the distributor could get damaged.

Connect pipes to the respective couplings of the auxiliary hydraulic system of the operating machine: - If necessary, remove the plastic caps blanking the equipment hydraulic system couplings and install the supplied flexible hoses. - Remove the protection caps from the quick couplings and clean the fittings and the respective seats using a cloth in order to eliminate any dust and dirt build-up.

Attention Clean the equipment and machine quick couplings accurately with the aid of a cloth, before connecting them.

Connect the quick couplings of flexible hoses to the relevant fittings of the working machine auxiliary system.

d = Drain

The equipment is activated through the command of the working machine aux. system. Every operating machine has its own type of controls for the auxiliary hydraulic circuit, it is the installer’s task to identify the control positions on the machine.

d