1 minute read
EQUIPMENT REMOVAL
Equipment removal
- Select a flat surface on which to place the equipment, makes sure it is protected as much as possible from atmospheric agents and from access of unauthorised persons. - Place the equipment on the ground. Discharge the pressure in the operating machine auxiliary system as recommended in the relevant use and maintenance manual. - Switch off the operating machine engine, engage the parking brake and remove the key from the dashboard. - Disconnect the flexible hoses of the equipment hydraulic system from the relevant quick couplings (3-4) positioned on the machine, and insert the protection caps on all fittings. - Disconnect all electrical connections. - Disengage equipment as explained in the working machine use and maintenance instructions under the section describing equipment change-over.
Attention During disengagement, stay at a safety distance since the equipment tends to settle on ground thereby causing the risk of crushing your lower limbs.
Release the machinery plate from equipment fittings and slowly move the machine away.
