T racks

When alighting from the machine the upperstructure, always face the machine and use the steps and access handles.

20. the event operating problem failure, move the machine a safe place, lower the attachment the ground, shut down the engine and remove the starter switch key .

Locate the problem, report it if necessary and take the necessary steps warn others not attempt operate the machine.

21. Before tilting the seat back forward, it is mandatory raise the armrests avoid any accidental operation the control levers.

Preventing risks caused vibrations

The machine's vibration fects the comfort and in some cases the health and safety the operator .

To reduce vibration risks a minimum:

Make sure that the machine, the equipment and the tool are suitable for the work carried out.

Make sure that the machine is in good condition and that servicing intervals are complied with.

Check the shoe tension adjustment and the play in equipment linkages.

Make sure that the operator's seat and is adjustment controls are in good condition and then adjust the seat suit the operator's size and weight. The operator's seat complies with the ISO 7096, 2000 standard, EM 6 class.

During work:

Operate all controls gradually ensure smooth machine operation. Modify the machine's operation suit the working conditions. During travel, adjust the machine's speed, reducing it if necessary . Make sure that the machine's operating radius is in good condition, and free obstacles and holes.

Cab protection ROPS, FOPS and OPG (operator protective guard, optional)

Never try weld straighten the protective structure.(ROPS, FOPS, OPG)

not modify the protective structure in any way . Any modification, such welding, drilling, cutting, addition accessories, well damage suf fered following impact reduces the protection that it provides. Replace the protective structure if it has suf fered impact and not attempt repair it.

Incorrect inspection service work the protective structure may lead serious injury . Carry out inspection operations the protective structure given in this manual. the protective structure its components need replaced, use only those parts that are listed in the spare parts catalogue corresponding your machine.

Quick coupler (option)

Never attempt switch the control switch the unlock position with the machine operating.

Every time the bucket is installed the quick coupler , always close the bucket and raise the attachment that you can visually check if the bucket pin is properly engaged with the fastening hook.

When the quick coupler is installed, the work range the machine changes. Depending the position the attachment, the tool may interfere with the machine. Always maintain the safety distance.

Absolutely not use the front rear fastening point for installing the attachment the quick coupler perform the load handling work.