2 minute read
TYPE, SERIAL NUMBER AND YEAR OF MANUFACTURE OF THE MACHINE
Before permitting a new operator on this machine, make sure: 1. That the operator has received the necessary training on how to operate the machine correctly and safely in one of our training centers or from an approved organization. 2. That the operator has read and understood the instructions given in this manual. Before allowing an operator to remove the twin wheels, make sure he is qualified and has received the necessary training to carry out this kind of operation and that he has read and completely understood the instructions given in this manual. Always keep this manual in the storage compartment provided for it. Make sure it is always complete and in good condition. If you wish to obtain additional manuals, or manuals in another language, consult your CASE Dealer. Your CASE Dealer is at your disposal for any further information. He will also provide any after-sales service you may require, and genuine CASE spare parts, your guarantee of quality and match.
TRIM THIS EDGE
9
TRIM THIS EDGE RIGHT PAGE
Template Name: OM_1_colTemplate Date: 1994_04_29
Template Date: 1994_04_29Template Name: OM_1_col
TRIM THIS EDGE
Official documents
- Indicates that the weight shown on the manufacturer’s plate is a value based on the heaviest configuration and does not always correspond to the configuration being carried.
An “EC” certificate of conformity
- For a new, work site machine, series produced as per the approved type, designed and manufactured in conformity with the requirements of modified European directive 89/392, with regard to machine safety and mainly with:
1 -The following directives: - 86/662 EEC: Noise level - 89/336 EEC: Electromagnetic compatibility 2 -The following European standards: - EN 474-1: Safety - General requirements - EN 474-5: Safety - Hydraulic excavators including load lifting
IMPORTANT : An original in color with the embossed icon of this “EC” certificate of conformity is supplied with each machine and must be kept carefully by the owner. IMPORTANT : The official documents supplied with the machine must be kept by the owner so that he may show them to the control authorities if requested to do so.
Certain machines do not meet the standards required to justify CE CONFORMITY. In this case the CE MARK and YEAR OF BUILD are not to be found on the machine. The information concerning CE conformity in this manual (Markings, Official documents, Specifications details, ...) does not apply to these machines.
10
TRIM THIS EDGE LEFT PAGE
