ELECTRICAL SYSTEM
Battery Fluid Level Check the fluid level of the batteries every 500 hours of operation. If the machine is being operated in high temperature environments, check the fluid level of the batteries every 250 hours. If the fluid level is low, add clean or distilled water to each cell until the fluid level is at the split ring at the bottom of each cell opening. IMPORTANT: If the temperature is 32°F (0°C) or below and you have added water to the batteries, do the following; Connect a battery charger to the batteries or operate the machine for approximately two hours. This procedure is necessary to mix the water with the electrolyte.
Battery Vents Keep the battery vents clean, make sure the vents are not restricted.
Cleaning the Batteries
TRIM THIS EDGE
Check the batteries and battery compartment regularly for dirt, corrosion and damage. Dirt mixed with electrolyte or moisture on the top of the batteries can cause a discharged condition in the batteries. Use one of the following methods to clean the batteries. 1. Use Case Battery Saver, Part Number M20376. Follow the instructions on the container. This cleaner does not need water. 2. Use baking soda or ammonia and flush the outside of the batteries with water. If you do not have Case Battery Saver, use other special cleaners to prevent corrosion on the battery terminals.
BS00N080
224
TRIM THIS EDGE Bur 6-36080EUR LEFT PAGE
