SAFETY/DECALS/HAND SIGNALS
Template Name: OM_1_col Template Date: 1994_04_29
● Always use the hand rails when mounting
● Before starting the engine, securely
or dismounting from the machine. Always face the machine when mounting or dismounting. This will provide more secure hand and foot mobility to help prevent slipping and possible injury.
fasten your seat belt. Your machine is equipped with a ROPS cab or canopy for your protection. The seat belt can help insure your safety if it is used correctly and maintained. Never wear a seat belt loosely or with slack in the belt system. Never wear the belt in a twisted condition or pinched between the seat structural members.
● Remove all loose objects from the operators area and from the machine. Loose objects can jam controls and cause accidents.
● Make sure all persons are away from the ● Operate controls only when seated in the
machine before you start the engine.
Operators seat.
● Before starting the engine, be sure all ● Sound horn to alert persons in the work
operating controls are in neutral and the parking brake is applied.
area. TRIM THIS EDGE
!
MACHINE OPERATION
● Do not turn the steering wheel until
!
the speed until you can see everything around you in the work area.
Alt= to hide template information Alt+ to display template information
everyone is clear of the machine and the center pivot area.
● Contact with overhead power lines can ● Check all controls in a clear area and
cause severe electrical burns or death from electrocution. Make sure there is enough clearance between the machine and overhead power lines.
make sure the machine is operating correctly.
● A frequent cause of personal injury or death is persons falling off and being runover. Do not permit other persons to ride on the machine. Only one person the operator - should be on the machine when it is in operation.
● Electrical cables, gas pipes, water pipes,
● Engine exhaust fumes can cause death.
● If this machine rolls over, you can be
If you operate this machine in an enclosed area, make sure there is good ventilation to replace the exhaust fumes with fresh air. Dust, fog, smoke, etc, can decrease your vision and cause an accident. Stop the machine or decrease
injured or killed. You must make a judgment if weather, road, or earth conditions will permit safe operation on a hill ramp, or rough ground.
or other underground objects can cause injury or death. Learn the location of underground hazards before you operate your machine in a new area.
12
TRIM THIS EDGE
LEFT PAGE
