CONTROL FUNCTIONS (CONT’D) Application Interface Outline (Cont’d) •
Control failure A failure detected by the E-ECU may cause the engine to stop. For details see "Engine/control failure detection" sections.
Figure 10-40-40
ECU close
Engine stop
Stop SW When stop SW is ON (standard)
open NO SHUDNSW(E15)
Disconnection
Stop SW Operation (Normally Open contact type: NC) OFF(open)
Permitted
ON(close)
Stop
Disconnection(open)
Permitted
Stop2 SW (Normally Open contact type: NO)
CAN input
Operation
OFF(open)
0
Permitted
ON(close)
1
Stop
Disconnection(open)
-
Permitted
APP-IP7(E13) Disconnection
NO
open close
Stop2 SW When stop2 SW is ON (standard)
Engine stop
Figure 10-40-41
ECU
Immobilizer key Power supply short
SHUDNSW (E15)
Logic setting of SHUDNSW terminal=NC (optional) NC
Disconnection
Body short
10-40-38 86 of 182
Condition of engine stop switch (NC)
Engine operation
OFF(close)
Permitted
ON(open)
Prohibited
Disconnection (open)
Prohibited
Body short
Prohibited
Power supply short
Permitted
E55W, E60, E80 Electronic Control System Manual
