01 Safety 01
Seatbelts Always use a seatbelt
Releasing the seatbelt – Press the red lock button and then let the seatbelt retract. If the seatbelt does not retract fully, feed the seatbelt in by hand so that it does not hang loose. The seatbelt locks and cannot be withdrawn:
G020104
• if it is pulled out too quickly. • during braking and acceleration. • if the car leans heavily.
Tensioning the hip strap. The belt must be positioned low down.
Heavy braking can have serious consequences if the seatbelts are not used, so make sure that all passengers use their seatbelts. It is important that the seatbelt lies against the body so it can provide maximum protection. Do not lean the backrest too far back. The seatbelt is designed to protect in a normal seating position.
Putting on a seatbelt: – Pull the seatbelt out slowly and secure it by pressing the buckle into the lock. A loud "click" indicates that the seatbelt has locked.
12
Keep in mind the following: • do not use clips or anything else that can prevent the seatbelt from fitting properly • ensure that the seatbelt is not twisted or caught on anything • the hip strap must be positioned low down (not over the abdomen) • tension the hip strap over the lap by pulling the diagonal shoulder belt as illustrated.
WARNING The seatbelts and airbags interact. If a seatbelt is not used or is used incorrectly, this may diminish the protection provided by the airbag in the event of a collision.
WARNING Each seatbelt is designed for only one person.
WARNING Never modify or repair the seatbelt yourself. Contact an authorised Volvo workshop. If the seatbelt has been subjected to a major load, such as in a collision, the entire seatbelt must be replaced. Some of the seatbelt’s protective properties may have been lost even if the seatbelt does not appear damaged. The seatbelt must also be replaced if it shows signs of wear or damage. The new seatbelt must be typeapproved and designed for installation at the same location as the replaced seatbelt.
