2 minute read
Identification of the equipment and the manufacturer
The technical data shown in this manual do not in any case replace those shown on the labels attached to the equipment.
The labels attached to the equipment must NOT be removed, damaged, dirtied, hidden, etc.
Advertisement
The approval label contains the following information: 1. Manufacturer 2. Model 3. Rating data 4. Certification marks
N.B. The labels must NOT be hidden with objects and extraneous parts (rags, boxes, equipment, etc.); they must be cleaned regularly and kept visible at all times.
1
3
www.abb.com/solar SOLAR INVERTER 2
Vdc max Vdc MPP Vdc, Full Power Idc max
Isc max
600 V 90 - 580 V 150 - 530 V 2 x 18 A 2 x 22 A
-25 to + 60 °C -13 to +140 °F IP65
DINV VDE 0126-1-1 PROTECTIVE CLASS: I
MODEL: PVI-5000-TL-OUTD
4
Made in Italy
Vacr fr
230 V 1Ø 50 Hz
Pacr (cos φ =1) 5000 W(*) @ 60 °C amb.
Pacr (cosφ= ± 0.9)
5000 W(*) @ 55 °C amb. Pac max (cosφ = 1) 5000 W @ 60 °C amb.
Iac max
25 A
(*): 4600 W for DE and AU Versions
5 minutes
1
www.abb.com/solar SOLAR INVERTER 2
DINV VDE 0126-1-1 PROTECTIVE CLASS: I 4
MODEL: PVI-6000-TL-OUTD
Made in Italy
3
Vdc max Vdc MPP Vdc, Full Power Idc max
Isc max
600 V 90 - 580 V 180 - 530 V 2 x 18 A 2 x 22 A
Vacr
fr
Pacr (cos = 1)φ Pacr (cos =φ ± 0.9)
Iac max
230 V 1Ø 50 Hz 6000 W @ 50 °C amb. 6000 W @ 45 °C amb. 30 A
-25 to + 60 °C -13 to +140 °F IP65
5 minutes
UNO
ABB PVI-XXXX-TL-OUTD-Y
In addition to the label showing the specifications of the inverter, there are two part identification labels for the inverter and wiring box. These labels list the following information:
P/N:PPPPPPPPPPP SN:YYWWSSSSSS WK:WWYY
WO:XXXXXXX
SO:SXXXXXXXX Q1 • Inverter model
- XXXX = Inverter power rating: - Y = Integrated disconnect switch
• Inverter Part Number
• Inverter Serial Number composed of: - YY = Year of manufacture - WW = Week of manufacture - SSSSSS = sequential number
• Week/Year of manufacture
The officially required information is located on the approval label. The identification label is an accessory label which shows the information necessary for the identification and characterisation of the inverter by ABB.
N.B. The labels must NOT be hidden with objects and extraneous parts (rags, boxes, equipment, etc.); they must be cleaned regularly and kept visible at all times.
