Bradbury TWO POST & SCISSOR LIFTS
No surcharge for single phase
4 Tonne Two Post Lift (Fully Baseless)
DE S INCLU T IF L T D S N ALL 2 PO NANCE A E T IN A M FREE WARRANTY 2 YEAR
The Bradbury H2401/3G & H2401/3HG (H24 series) of twin-ram two post lifts are fully baseless with over head gantries making them ideal for moving transmission jacks and oil drainers beneath the vehicle. With a low pad height of just 95mm these lifts are suitable for most makes and models of cars and small vans.
H2401/3G
5 £3,3ek4 ly
Two models of the H24 series are available; H2401/3G – Gantry height of 3800mm (drive under clearance) H2401/3HG – Gantry height of 4200mm (drive under clearance) also features longer front arms versus the standard G version.
We 5† from £17.7
G
H2401/3H
5 £3,5ek4 ly
We 2† from £18.8
• 4.0 tonne lifting capacity • Lifting & lowering time: 50 seconds / 40 seconds • Lifting range: 95mm to 1935mm • Front minimum / maximum arm length: 602mm – 1077mm (G) / 931mm – 1451mm (HG) • Rear minimum / maximum arm length: 931mm – 1451mm (G) / 931mm – 1451mm (HG) • Motor size – Single phase: 1.5kW • Motor size – Three phase: 1.85kW • Hydraulic lifting operation AVAILABLE • Fully Baseless or Baseframe AS SINGLE • Three phase or Single phase PHASE OR • Symmetrical multi-purpose lift THREE PHASE • Installed & supported by GEMCO nationwide
3 Tonne Two Post Lift (Baseframe) • 3.0 tonne lifting capacity • Lifting & lowering time: 55 seconds • Lifting range: 90mm to 1890mm • Front minimum / maximum arm length: 528mm / 915mm • Rear minimum / maximum arm length: 714mm / 1250mm • Motor size: 4.5kW • Safety Nut • Solid H type base frame • Automatic arm locking device • Dead man controls, 24 volt • Electro-mechanical safety device • Automatic lubrication
T HASE LIF THREE P
OUND LOW GR NCE A CLEAR
3.2 Tonne Scissor Lift • • • • • • •
3.2 tonne lifting capacity Hydraulically synchronised platforms Low voltage control system Full access to sides, front and rear of vehicle Low ground clearance ideal for very low skirted vehicles Control panel allows precise lifting Lockable run on ramps
• • • •
Non return valve provides safety against hydraulic failure No mechanical locking therefore no air requirement Set of 4 rubber blocks as standard Installed & supported by GEMCO nationwide
M2903CD
£2,795
Weekly † .84 from £14
PERFECT FOR TYRE SHOPS
H8901/3E
0 £ 3,6k5 ly M2903CD Full specifications available upon request!
Complete with 60mm & 100mm pad adaptors
Garage Essentials - For the best Choice, Quality, Service & Expertise
Wee 3✝ from £19.7
H8901/3E
27