ATTACHMENTS >> Products Heatwurx HWX-AP40 Asphalt Processor
Utilicor Minicor-2 Coring Attachment
Coneqtec/Universal AP Cold Planers The AP cold planer attachment line comes in widths from 12 to 48 in. and cutting depths to 6 in., with easy adjustment via hydraulic or electric-over-hydraulic controls. • 24-in. side shift travel • Planings stay inside of the planer cowling due to depth adjustment positioning • Drum rotates faster for less bounce • Stress spread out across the width of the planer • Swingaway hydraulic controls • Fewer wear points and parts • Patented open drum design
The 48-in.-wide Minicor-2 keyhole coring attachment fits skid-steer loaders with a rated operating capacity of 2,000 lbs. and a hydraulic flow rate of 16 gpm. • Cuts keyhole cores up to 24 in. in depth through asphalt, concrete or reinforced concrete pavement • Accommodates coring drums from 8 to 24 in. in diameter • Compact size and mobility enable fast, accurate work in tight spaces • Integrated 100-gal. water tank • Universal quick-attach coupler system and quick-connect hydraulic and electrical hookup allow for “plug and play” installation
Indicate 60 on inquiry card
Indicate 61 on inquiry card
The HWX-AP40 Asphalt Processor has a 40-in. working width, and is designed to mix existing asphalt that has been heated in place by Heatwurx infrared heating systems. • Screeds material into place over the patch amd blends patching material with the heated pavement • Provides a heated joint between repaired areas and existing pavement • Easily attaches to a skid steer
Indicate 62 on inquiry card
PavementGroup SkidPatcher10A Asphalt Plant and Recycler The SkidPatcher10A mobile asphalt mixer and recycler produces virgin hot mix using pre-packaged 50-lb. bags of DOT-approved mix. • Heats up to 400 lbs. of mix to 340° F in eight minutes • Also recycles millings and small chunks • Suitable for military airfields, airports, roadways, parking lots and driveways • Attaches to skid-steer loader using standard connection mount points and two hydraulic lines for mixing • Fully mobile and simple to operate
Indicate 63 on inquiry card
Hitek Pavijet Mini Pavers
Ditch Runner DR-150 Utility Paver These Utility Pavers are designed to make asphalt patching and utility paving faster and more profitable by reducing labor time. • 1/4-in. heavy-duty steel construction • Adjustable width from 24 to 48 in. with paving depths of 2.5 to 8.5 in. • Independent adjustment depth screws • Side shoes adjustable from 0 to 5 in. • Easily adapts and clamps to any skid-steer bucket
Indicate 66 on inquiry card
The Pavijet Mini Pavers fill a niche between stand-behind paving machines and the use of spreaders, drag boxes or hand-spread asphalt. • Can be used to lay hot and cold asphalt or to spread sand, gravel and stones • Simple to operate, maintain and transport • Connect to a skid-steer loader or compact excavator, depending on model • MG7 has a retractable, vibrating, heated screed, 3.5-ton hopper and paving speed up to 82 fpm
Indicate 65 on inquiry card
Road Widener Skid-steer Attachment The Road Widener can be used for work on road shoulders, driveways, trails and paths. • Handles widths of 1 to 3.5 ft. and can disperse a 20-ton truckload of gravel in minutes at speeds of over 12 mph • Width, height and flow hydraulically controlled with precise control of material placement • Features include adjustable slope control and a hydraulic-driven conveyor belt with heavy-duty 10-in. head and tail pulleys • 2,600-lb. empty weight and 10-ft. width allow easy transport via a standard-width trailer
OKADA AMERICA INC. OAC SERIES VIBRATORY COMPACTOR/DRIVERS Okada OAC Series vibratory compactor/ drivers let you expand the versatility of your loader/backhoe or excavator. Rugged construction and proven compaction technology make quick work of any compaction or driving job. Keep your crew safely out of the trench and eliminate the need for expensive shoring. The Okada OAC Series is available in five different models. • Flow control is standard • Extendable plates available for narrow trenches • Heavy-duty motor extends service life • Quick attach mounting system available for most models • Mounting bracket and whip hoses are all inclusive in cost • Minimal maintenance requirements Visit www.okadaamerica.com for more information.
Indicate 9 on inquiry
20 EQU IPM ENT T OD AY | August 2016 ET0816_20-21_AttachmentProd_CB.indd 20
Indicate 64 on inquiry card
Mr. Manhole Gold Series Six Shooter Manhole Cutter The Gold Series Six Shooter offers improved cutting surfaces, a heavier frame, a Quick Adjust variable cutting diameter and custom heavy-duty auger drive for easier manhole removal. • Attaches to any skid steer capable of a 30-gpm minimum flow and 2,500-lb. minimum lift capacity • Includes a custom heavy-duty auger drive • Adjustable cutting diameter from 28 to 72 in. and cutting depth up to 20 in. (14 in. with standard blades) • Completely removes the manhole frame and road surface from concrete or asphalt in minutes • Carbide teeth can be replaced in seconds even on the job
Indicate 67 on inquiry card
Attachments International Patch Master The Patch Master is designed to patch cracks on both asphalt and concrete. • Hydraulic gate allows precise metering of asphalt from the loader cab • Tungsten carbide wear shoes allow precise leveling on asphalt or concrete • Adjustable front door to set the depth of the material
Indicate 68 on inquiry card
GECON Attachments Asphalt Float The GECON Asphalt Float is suited for asphalt repairs, trench work/repairs, skidsteer paving and asphalt trenching. • Simple hookup/connection to skid steer • Adjustable moldboard (screed height) • Hydraulic side shift out to 5.5+ ft. • Hydraulic wing adjustments (5-in. trench or 6 ft. wide) • Low maintenance
Indicate 69 on inquiry card
ForConstructionPros.com
8/9/16 2:27 PM