FIRE RETARDANT 1
PRODUCT INFORMATION
FIRE RETARDANT PANELS BY VENØ is Danish design and acoustic panels in wood with several variants of slats for walls and ceilings in high quality. Behind the BY VENØ brand is Fog & Venø A/S, which is responsible for all design and production. At Fog & Venø A/S, in addition to design, we also focus on the green transition in our choice of materials and handling of the product after use. Fog & Venø produces panels in various sizes, both for private and professional actors in the construction industry. To ensure the highest quality of our products, all panels are quality controlled during production and packing to avoid defects on acoustic panels before they are shipped to the customer. With BY VENØ acoustic panels, you will achieve improved indoor climate and well-being in both private homes and workplaces.
2
Acoustic panels can attenuate and stop reverberation time in a room where several people are staying at the same time. With the right set-up, noise can be reduced by up to 50%. Our Fire Retardant acoustic panels are produced with a fibreboard. Our slats are either made of plywood with veneer glued to the front. This means that there may be shade differences in the expression of the veneer.
How to create the ideal sound experience in a room. The importance of acoustic control is underestimated in many buildings. Sound affects us in our daily lives. It can make the difference between a good and a bad day at school, work, the cinema, the theatre, etc. Reduce noise levels effectively with BY VENØ acoustic panels. How do you create the ideal indoor climate, both in private homes and at work? Do you have challenges with hearing what others say when more people are in the room? The challenge with poor acoustics, is well known and a big challenge for many people! What is the cause of bad sound and what can we do to improve it? Sound waves travel around the room, and each time the sound wave hits a hard surface, it is thrown back out into space, where its reverberation time becomes shorter and shorter over time. With more people, phones and small talk, there is constant reverberation in the room; this is where our acoustic panels make a big difference. Our Danish-made acoustic panels break the sound and absorb the sound wave, so it dies out when it hits the panels. This means that the sound wave is eliminated and the reverberation time is shortened, which will improve the indoor climate and the feeling of wellbeing in the room, whether we are talking about private, commercial or public buildings.
Why choose BYBY VENØ? Hvorfor vælge VENØ? • Fire test: EN 13823 / B-s1,d0 • God akustik • • Good Danskacoustics design • Danish design • Dansk kvalitetsprodukt • quality product • Danish Sundt indeklima som skaber trivsel • Healthy indoor environment that promotes well-being og velvære • quickmontage assembly • Easy Nem and og hurtig
3
Oak
Oak (white)
Pine
Smoked Oak
Oak (grey)
American walnut
FIRE RETARDANT PANELS specifications m2
Core
Fibreboard
Dimensions
m2
Weight
Oak
21 x 600 x 2480 mm / 0.83 x 23.62 x 97.64 in.
1,44
14,2 kg
Oak (white)
21 x 600 x 2480 mm / 0.83 x 23.62 x 97.64 in.
1,44
14,2 kg
21 x 600 x 2480 mm / 0.83 x 23.62 x 97.64 in.
1,44
14,2 kg
21Test x 600Report x 2480 mm / 0.83 x 23.62 x 97.64 in. SBI Test Report SBI Laboratory name name MeKA Fire Fire testing testing Laboratory MeKA Operator Elvis 21 x 600 x 2480 mm / 0.83 x 23.62 x 97.64 in. Operator Elvis Cukurs Cukurs
1,44
14,2 kg
1,44
14 ,2kg
21 x 600 x 2480 mm / 0.83 x 23.62 x 97.64 in.
1,44
14,2 kg
Oak (smoked)
Report Report produced produced with with the the Fire Fire Testing Testing Technology Technology SBICalc SBICalc v2.7b v2.7b software software
Oak (grey) Pine
Test Test filename filename Smoke baseline baseline filename filename Smoke Report Report identification identification Product identification identification Product
American Walnut
A safe panel for your project
BY VENØ’s fire approved panel is classified as a EN 13823 / B-s1,d0 product. The graph below shows that the product fully complies with the requirements - and has potential classification as an A2/B-s1,d0 Potential classification Class Smoke production Flaming droplets/particles
C:\SBICALC\Data\7599\7599-1-1.CSV C:\SBICALC\Data\7599\7599-1-1.CSV C:\SBICALC\SMOKE\22121201.CSV C:\SBICALC\SMOKE\22121201.CSV 5799-1-1 5799-1-1 Acoustic panel panel -- Test Test nr.1 nr.1 Acoustic
HRR HRR and and HRR(30) HRR(30) graph graph
HRR and HRR(30) graph
HRR HRR
page page 2 2
HRR(30) HRR(30)
80 80 70 70 60 60 50 50 HRR HRR(KW) (KW)
Veneer
40 40 30 30 20 20
A2/B s1 d0
10 10 0 0 -10 -10
0 0
200 200
400 400
THR and and FIGRA FIGRA graph graph THR
4
THR and FIGRA graph
600 600
THR THR
800 800 Time (seconds) Time (seconds)
1000 1000
1200 1200
1400 1400
FIGRA FIGRA 120 120
35 35 30 30
100 100 80 80
20 20
60 60
15 15
FIGRA FIGRA(W/s) (W/s)
THR THR(MJ) (MJ)
25 25
40 40
10 10
20 20
5 5 0 0
1600 1600
0 0
200 200
400 400
600 600
800 800 Time (seconds) Time (seconds)
1000 1000
1200 1200
1400 1400
0 0 1600 1600
The test results relate to the behaviour of the test specimens of a product under the particular conditions of the test; they are not intended to be the sole criterion for The test results relate to the behaviour of the test specimens of a product under the particular conditions of the test; they are not intended to be the sole criterion for assessing the potential fire hazard of the product in use. assessing the potential fire hazard of the product in use.
Products that fit the panel: • Screws 4.5 x 45 mm. black • Kit-rep set. (Lacquer: clear/black)
Q&A How large an area can I cover with acoustic panels? As a starting point, we recommend that you cover approximately 20% of the wall area or about 30% of the floor area in the room to improve the room’s sound quality significantly. Cleaning? Our acoustic panels can be easily cleaned with a wrung damp cloth or with a vacuum cleaner. Mounting of panels You can mount the panel directly on the wall or ceiling for general acoustic dampening. If the panel is adapted during installation, fire-retardant varnish must be applied to adapted surfaces! See assembly drawing on page 6. Tolerances/Deviations from specified dimensions Tolerances: +/- 3mm. Angularity: length/width +/- 2mm. Weight +/- 10% Disposal/Recycling. Sustainability is an important part of our DNA. Therefore, we have focused on making the handling of our panels after use as simple as possible. The entire panel is made from wood products that can be delivered to any recycling centre, where offcuts can be deposited as ”recycled wood”. Where can I use the FR Panels? BY VENØ’s Fire Retardent acoustic panel may be used for commercial, public and private buildings.
Our specially developed Fire Retardant acoustic panel, which is fire approved to be a: EN 13823 / B-s1,d0 panel, allows any actor in the construction industry to optimise the indoor climate while the panel has a decorative effect, in the room where it is installed. It is available with 6 variants of veneers on the front. Is there a fire test on the panel? Yes, our Fire Retardant acoustic panel is fire approved as a EN 13823 / B-s1,d0 building material. Approved for use in public and private buildings, with specific fire requirements for the materials. Is the acoustic effect as good as your regular. panels? If the Fire Retardent panel is mounted directly on, e.g. aerated concrete, plaster or concrete wall, it has the same effect as our standard acoustic panels. Can I oil the surface of the slat. It is not possible to surface treat the slats, as they are surface treated, from the factory.
5
6
mm
2480 mm
10
Panel mounting
Milimeters
Inches
2480 mm
97.64 in.
600 mm
23.62 in.
27 mm
1.06 in.
13 mm
0.51 in.
11 mm
0.43 in.
10 mm
0.39 in.
Graph Sheet 1
TEST Reg. no. 100
Laboratory measurement of sound absorption according to EN ISO 354:2003
Measurement of sound-absorption Client:
Fog & Venø A/S, Buntmagervej 5, 7490 Aulum, Denmark
Measurement of sound absorption coefficient acc. DS/EN 13ISO 354:2003 October 2022 Date of test:
Test specimen: Product: Acupanels FR-panel Thickness: 21 mm
Test Area 10.8 m2 Room volume 215 m3 Room surface area 305 m2
66 mm (Type E-65 mounting with mineral wool)
Test area:
10.8 m²
Frequency Room volume: 215 m³ s [Hz]
Room surface: 100 125
1.2
305 m²
0.24 0.34
1.0
Frequency 160 0.35 αs f 0.39 0.8 [Hz] 200 100 250 0.240.41 125 315 0.340.36 0.6 TEST Reg. no. 100 160 400 0.350.35 200 500 0.390.33 0.4 250 630 0.410.31 315 800 0.360.36 400 0.35 0.2 1k 0.36 500 0.33 1.25k 0.37 630 0.31 0.0 800 1.6k 0.360.41 125 500 1000 250 0.47 A/S, Buntmagervej 5, 7490 Aulum, Denmark & Venø Client: 1000 2k Fog 0.36 Frequency, f [Hz] 1250 2.5k 0.370.50 13 October 2022 Date of1600 test: 0.410.58 3.15k 2000 4k Product: 0.470.67 Acupanels FR-panel Test specimen: 2500 5k 0.500.68 Thickness: 21 mm 3150 0.58 4000 0.67(Type A mounting) Construction 21 mm 0.68 height:5000 Sound absorption coefficient, αs
Figur 1: Mounting: 45mm insulation behind panels. Closed frame around edges.
Construction height:
Graph Sheet 1
Laboratory measurement of sound absorption according to EN ISO 354:2003
Test Area 10.8 m2 Room volume 215 m3 Room surface area 305 m2
4000
2000
4000
Test area: 10.810 m²November 2022 FORCE Technology, Frequency Room volume: 215 m³ s Liisa Sell [Hz] Room surface: Acoustics, Noise305 andm² Vibrations 100
0.02
125
0.04
Frequency 160 αs 0.09 f 0.12 [Hz] 200 100 250 0.02 0.21 125 315 0.04 0.32 160 400 0.09 0.45 200 500 0.12 0.50 250 630 0.21 0.49 315 800 0.32 0.47 400 0.45 1k 0.42 500 0.50 1.25k 0.39 630 / DANAK no. 0.49 122-32087 100/2796 Rev. 1 1.6k 0.41 800 0.47 1000 2k 0.42 0.44 1250 2.5k 0.39 0.46 1600 3.15k 0.41 0.56 2000 4k 0.44 0.67 2500 5k 0.46 0.67 3150 0.56 4000 0.67 5000 0.67
1.2
Sound absorption coefficient, αs
Figur 2: The sound test shows installation directly on the wall.
2000
1.0 0.8 0.6 0.4 0.2 0.0
Page 9 of 14 125
250
500
1000
Frequency, f [Hz]
7
FORCE Technology, 10 November 2022 Liisa Sell Acoustics, Noise and Vibrations
122-32087 / DANAK no. 100/2795 Rev. 1
Page 9 of 14
Contact information Fog & Venø A/S Buntmagervej 5, DK-7490 Aulum Tlf: (+45) 88 77 83 70 hello@fog-veno.com www.byveno.com
