Page 1


THE FIRETECH BRAND BY HIVIZ LED LIGHTING

“At HiViz LED Lighting, our development team works side by side with the men and women in the fire and emergency service industry; we’re firefighters ourselves. We understand what it takes to hop out of bed at 3AM for a structure fire in the middle of nowhere. We’ve been there on those tragic traffic accidents where the road gets shutdown for hours, usually just after the bars close at 2AM. Nothing makes a scene more difficult than inadequate lighting, that’s the reason our team is dedicated to supplying the best lighting available in our industry. Experience is the best teacher and it certainly helps us build better lights.”

-SAM MASSA, PRESIDENT / CHIEF TECHNOLOGIST || MEET THE CREW

CONTACT US:

SAM MASSA || PRESIDENT SAM.MASSA@HIVIZLEDS.COM

KAOMA MASSA || BUSINESS MANAGER KAOMA.MASSA@HIVIZLEDS.COM

ACCOUNTING || AP / AR OFFICE ACCOUNTING@HIVIZLEDS.COM

WANT TO SCHEDULE A DEMO? CONTACT SALES@HIVIZLEDS.COM

NEW ORDERS

PLEASE EMAIL TO: ORDERS@HIVIZLEDS.COM

2

(703) 662-3458


A MESSAGE FROM THE FOUNDER v

Thank you for your interest in FireTech solutions by HiViz LED Lighting! When I began working in the Fire/ Rescue/EMS field, I noticed a distinct need for improved quality of light on our rescue scenes. I started HiViz LED Lighting with the goal to revolutionize the way the Fire and Emergency Services personnel do their jobs after the sun goes down. HiViz LED Lighting is dedicated to developing the most innovative, highest quality, LED lighting solutions on the market. Our products range from the flagship 72” low profile LED brow lights, to small utility lights, and everything in between. Unlike other manufacturers, our focus lays exclusively in forward-facing visible LED lighting products. This allows a specialists approach designing the ultimate lighting solution. We build products that put more light on your emergency scene than any other manufacturer, specifically in the areas that you need it, all the while streamlining the look of your apparatus and eliminating your lighting maintenance costs. We are so confident in our product offering that we couple it with industry’s only limited Lifetime guarantee. Thank you for your service, and for the sacrifices you make every day as a first responder!

PAGE INDEX INTRODUCTION 2 4 8

HiViz History Technology The Difference

SURFACE MOUNT SCENE LIGHTING 20

Guardian & Guardian Elite

RECESSED / SIMI-RECESSED LIGHTS

27-28 WL-X Work Lights 29 WL-X Beam Patterns

COMPARTMENT / UNDERCARRIAGE

TOTAL APPARATUS SOLUTIONS

22 23 23

BROW LIGHTS

HEADLIGHTS

POLE MOUNTED SCENE LIGHTS

WORK LIGHTS

SPECIALTY LIGHTING

10

12 13 14-15 16 17 18

Fixtures by Location

Series Introduction Brow Light Config’s Full Size Brow Lights MiniBrow Single Stack MiniBrow Trunnion MiniBrow Double Stack

24 25

26 27

FT-MB-2.15-CPREC FT-MB-2.18-REC FT-WL-X-9-CPREC

WORK LIGHTS (CONT.)

Headlight Introduction & P/N’s 4”X6”, 5.75” , 7” Headlights

Series Introduction WL-X-9 Swivel / Handle Mount

30 31

32 33

34 36

HD STRIP Lights AQX Undercarriage Light

Series Introduction & P/N’s FT-SL-15 & FT-SL-30

Light Canons Camera Integrated Lights

HIVIZLEDS.COM

3


PRIMARY TYPES OF LIGHTING WHY LED IS THE NEW CRAZE

By now, everyone knows that LED is the most effective form of lighting in todays world. But do you know the difference between this new-age technology and that classic forms of lighting from our past? Take a minute to learn about the strength and weaknesses of each style of light.

LED!

INTENSITY AMP DRAW

LIGHTING-EMITTING DIODE

HiViz LED Lighting offers a variety of LEDs in different color temperatures based on applications. LED Lights do not use a bulb, making them much more durable and require less energy to power.

LUMENS PER WATT

INTENSITY AMP DRAW HIGH INTENSITY DISCHARGE (HID)

HID Lighting runs at a 5000k temperature for a super white beam color. HID lights require a bulb, starter and ballast to operate. They have a higher output per wattage than Halogen bulbs.

LUMENS PER WATT

INTENSITY AMP DRAW HALOGEN

Tungsten-Halogen bulbs use an oversized globe and specially engineered filament to enhance light output. Halogen has a soft yellow light temperature.

4

(703) 662-3458

LUMENS PER WATT


LIGHTING TERMINOLOGY BEAM PATTERNS, LUX, LUMENS AND MORE

Every industry seems to have their own complicated language. Thankfully the terminology used in the lighting world is fairly simple to understand. Use these images and explanations to get a basic understanding of common measurements and specifications used in this catalog.

THE DIFFERENT TYPES OF BEAM PATTERNS 10°/20° “SPOT” BEAM

The spot beam pattern is used primarily as a driving light. The narrow beam creates a focal point accompanied by a “halo effect” which adds peripheral lighting. Best for high speed travel requiring distance.

40° “FLOOD” BEAM

The flood beam pattern is recommended as a driving beam at lower speeds when you need more peripheral lighting. This beam pattern is used in the FireTech Brow Light for Zone 2 lighting.

60° “SCENE” BEAM

The extra wide “scene” beam pattern is typically used for area lighting and for slow-speed applications. Please note that 60°/90° beam is not listed on each product page, but is available in most products.

+

FIRETECH OPTICS

FireTech branded Products can be confogured with a combination of 2/3rd FLOOD optics 1/3 SPOT optics for a hybrid light output that accomplishes multiple objectives within a single light fixture.

10° Narrow Beam 20° Narrow Beam 40° Wide Beam 60° Extra Wide 90° Extra Wide

TERMS FOR MEASURING LIGHT OUTPUT LUMENS

Lumens measure the overall output of a light source. Raw Lumens account for the rated output of the LED from the source. By contrast, the Effective Lumens rating accounts for thermal, optical, and electrical losses which reduce total output.

LUX

Lux measures the amount of light per square meter. Unlike lumens which is a measuremetn of light at the source, lux is a measurement on target, at a specific distance. This helps better determine whether those effective lumens are lighting up the environment with the necessary ammount light.

HIVIZLEDS.COM

5


OUR HIGH LEVEL CERTIFICATIONS IEC 62471

E-MARK

PHOTO BIOLOGICAL

European Regulatory certification for on highway use.

Ensures that light output has safe levels of UV exposure for both skin and eyes.

ROHS

Ensures no use of restricted hazardous materials in products such as lead, mercury, cadmium, PBB, and Phthalate.

IP-69K

IP RATING

Ingress Protection rates protection against outside elements. First number is solids, second is liquids.

DOT

ADR 13/00

UL

CE

ATEX 95 (94/9/EC)

EMC

US Department of Transportation certified for on road use. UL Certification is recognized around the world as a way to ensure standards. The ATEX 95 certification is given to electronic equipment that is resistant to flame and explosion.

Products which are in compliance with the Australian Design Rules (ADR). CE is a mandatory conformity mark for products in the European Economic Area. EMC and EMI certifies that a product does not interfere with other electrical products. This includes CISPR 25 Certifications.

INTENSE PRODUCT TESTING CONSUMPTION

All products are put on a digital power meter to test that they are operating correctly, checking for any electrical faults.

EMI

Products are tested in a sealed chamber to ensure that they don’t introduce RF noise into electronics/radios.

SUBMERSION / AGING

Once products are assembled every product is run through a submersion (water dunk test), then placed onto an aging rack and powered up for 30 minutes to ensure proper operation.

THERMAL IMPACT RAPID TEMPERATURE CHANGE

Products are alternated between a -40°C chamber and an 80°C chamber for 30 minutes. Products are then run for 72 hours to ensure full operational status.

PHOTOMETRIC ISOLUX BEAM PATTERN

Lights are tested in the Goniophotometer to model the beam pattern and depict the overall light output. This is now reuired by NFPA 1901 and the results are avaliable upon request.

HIGH TEMPERATURE & HIGH HUMIDITY OPERATIONAL

Products are placed in a 60°C, 94% humidity chamber and left operational for 72 hours. Afterwards, products are inspected for moisture, water drops, damaged LEDs, flickering LEDs, and more.

INGRESS HIGH PRESSURE IP69K

Products are sprayed from close distances with 80~100 BAR water pressure to verify the Ingress Protection rating, ensuring they are sealed properly.

VIBRATION 15.6 G RMS RATING

Products are placed on the vibration shock table with a vibration range of 25.6G for 4 hours to test that they can withstand the rated vibration standard. Products tested at 60 G rms are performed off-site.

LONG TERM DURABILITY

Products are then switched on and off 20,000 times repeatedly to ensure that they remain functional. 6

(703) 662-3458


WHAT MAKES OUR LIGHTING SUPERIOR? TOP BINNING

PULSE WIDTH MODULATION

WEATHERPROOF DEUTSCH CONNECTORS

ELECTRONIC THERMAL MANAGEMENT

Not all LEDs are created equal. Each run of LEDs by the manufacturer is binned to classify the quality within that batch. HiViz LED Lighting uses only top-binned LEDs to ensure the highest quality.

Each FireTech product features a weatherproof deutsch connector, ensuring the functionality of the light in harsh conditions. HiViz LED Lighting tests each batch of lights to ensure compliance with advertised certifications.

HIGH EFFICACY

FireTech products are engineered for the highest possible luminous efficacy - the ratio of lumens per watt.

PROUD MEMBERS OF FAMA

When enabled, Pulse Width Modulation integrated circuitry flashes the LED faster than the human eye can see for reduced heat, prolonged LED life and dimming capabilities.

Integrated Electronic Thermal Management automatically regulates heat levels by engaging special programs in the PWM circuitry to prolong each LEDs lifespan to 50,000+ hours.

DIMMING CAPABILITY

Prime Drive includes dimming capability. Dimming works by engaging PWM to reduce power while maintaining steady output. HiViz LED Lighting offers push button and dial dimmer units.

We’re Available in Quote Writer!

WHAT IS FAMA?

The Fire Apparatus Manufacturers’ Association (FAMA) is a non-profit trade association committed to enhancing the quality of the fire apparatus industry and emergency services community. This is achieved through the manufacture and sale of safe, efficient fire truck, fire apparatus, and fire equipment.

HIVIZLEDS.COM

7


WHY WE’RE DIFFERENT STRAIGHT TO THE POINT

2016 NFPA COMPLIANT

HONEST TECHNICAL SPECS

Vince Lombardi once said, “if you’re not keeping score, you’re only practicing.” We have an open door policy on our score book and are happy to share the raw testing data from our fixtures. At HiViz LED Lighting, we believe in building our business on a solid foundation; this means lots and lots of testing before publishing technical specifications.

THE NEW NFPA RULES FOR LIGHTING

In 2016 the NFPA 1901 standard moved to define how “Lumens” were to be measured. In the most simple terms, this change requires manufacturers to test fully assembled fixtures in a light tunnel before taking actual measurements AFTER the fixture has been “burned in” to its maximum operating temperature. It also requires device manufacturers to make the results of their test available upon request.

THE ONLY LIFETIME WARRANTY

OUR LIGHTS ARE TOUGH

You’ve got the back of the citizens in your community, we’ve got yours. With almost 20 years experience building for industrial markets, HiViz LED Lighting and its manufacturing and engineering partners know what it takes to build a fixture suited to last in the field. We are so confident in our fixtures durability, we back them with the industry’s only Limited LIFETIME warranty.

8

(703) 662-3458


ACCURATE LIGHT RENDERINGS

REALISTIC & ACCURATE FITOUTS

The FireTech lineup from Hiviz LEDs includes a complete range of Work and Utility LED lights. Put these fixtures to work in nearly any setting and you’ll be impressed by the outstanding light output, diverse mounting configurations, minimal amp draw, and durable housing. The FireTech WL-X range is a high quality premium series with versatile range designed specifically for the Fire and Emergency vehicle markets. We can typically produce a detailed rendering within five to ten business days if provided proper vehicle specifications.

3D REAL-WORLD APPARATUS FITOUTS

APPARATUS RENDERINGS & FIXTURE PLACEMENT

In addition to the realistic lux renderings, HiViz can produce 3D modeled fitouts to replicate the placement of a FireTech fixture on virtually any fire apparatus.

HIVIZLEDS.COM

9


P. 20-23

P. 26

P. 30-31

P. 26-29

P. 30-31


P. 12-18

P. 24-25


FIRETECH BROW LIGHTS THE ULTIMATE APPARATUS LIGHTING SOLUTION

The FireTech Brow light is our most revolutionary product. It can be configured to incorperate optional DOT Clearance Marker and Identification Lamps, allowing you to streamline the front edge of your apparatus while maintaining the FMVSS108 mandated visual signature of the ID lamps. The FireTech Brow Light is a first in class fixture designed specifically for the leading edge of the fire apparatus. Trust your rig to the experts with the FireTech Brow Light, featuring the industry’s only limited LIFETIME Warranty!

DOMINATE THE SCENE WITH 5 LIGHTS IN ONE

The FireTech Brow Lights give you right type of lighting for any scenario. By combining a long distance spot beam with multiple flood beams, your apparatus will have both range and coverage. 5 brow lights in one low profille housing

Wide Flood (Circuit 1) NarrowFlood (Circuit 2)

Spot Beam (Circuit 3)

12

(703) 662-3458


OPTIONAL MARKER LIGHTS (DOT COMPLIANT)

Each FireTech Brow Light has the added option of integrated DOT Approved marker lights to help increase safety and awareness.

PRODUCT CONFIGURATIONS AVAILABLE LENGTHS 46.22”/1,174.05MM 65.23”/1,656.80MM 72.69”/1,846.33MM

MARKER OPTIONS ML FIVE MARKERS ENDS+CENTER ML3 THREE CENTER MARKERS ONLY NONE NO MARKERS

HOUSING COLOR OPTIONS

CONFIGURE YOUR PART NUMBER LENGTH | MARKERS | HOUSING

FT-B-_____-_____-_____ 46 B 65 ML W 72 ML3

EXAMPLE FT-B-72-ML-W

BROW LIGHT - 72” - FIVE MARKERS - WHITE HOUSING

CONFIGURE ONLINE!

Create the perfect Brow Light for any apparatus. Simply input the required information and you’ll be given a ready-to-order part number! WWW.HIVIZLEDS.COM

HIVIZLEDS.COM

13


FIRETECH BROW LIGHTS 46”-72” FULL RANGE BROW LIGHTS

The FireTech Brow Light is the ultimate lighting solution for the front of your fire apparatus. Featuring Spot, Flood, and Scene lights, it has the power to illuminate anything in the path of the apparatus.

46” 36 LED 19,008 RAW LM

FT-B-46-W

65” 51 LED 26,928 RAW LM

FT-B-65-W

72” 57 LED 30,096 RAW LM

FT-B-72-W

72” 114 LED 60,192 RAW LM

Great for Pickup’s / Brush Trucks

46” ML 35 LED 15,840 RAW LM

BRIGHTEST SCENE LIGHT IN THE WORLD Cost-saving option on Custom Cab Trucks!

FT-B-46-ML-W

46” ML3 39 LED 19,008 RAW LM

Similar to ONE traditional Brow Light

FT-B-46-ML3-W

THREE PIECE KIT!

DESIGNED FOR RADIUSED ROOFS

72” ML 3PKIT 59 LED 28,512 RAW LM 72” ML 59 LED 28,512 RAW LM

FT-B-72-ML-3PKIT-W FT-B-72-ML-W

The One and Only! Our Most Popular Product

MODELS

SIMULATES LOCATION OF MARKER LIGHTS

DIMENSIONS

ITEM # FT-B-46-W FT-B-46-ML-W FT-B-46-ML3-W

DESCRIPTION 46” Brow Light, 3 circuits 46” Brow Light, 5 integrated marker lights, 4 circuits 46” Brow Light, 3 integrated marker lights, 4 circuits

LENGTH 46.22”/1,174.05mm 44.96”/1,142.40mm 50.01”/1,270.25mm

FT-B-65-W

65” Brow Light, 3 circuits

65.23”/1,656.80mm

FT-B-72-W FT-B-72-ML-W FT-B-72-ML-3PKIT-W

72” Brow Light, 3 circuits 72” Brow Light, 5 integrated marker lights, 4 circuits 3 Piece 72” Brow Light with marker lights for radiused cabs

72.69”/1,846.33mm 75.12”/1,908.05mm 2X 27.33” 1x 24.74”

CHANGE “-W” TO “-B” ON ANY FIRETECH BROW LIGHT PART NUMBER FOR BLACK HOUSING

2.45”

B46 A-PILLAR MOUNTING KIT

SPECIFICATIONS

Each brow light varies in technical specifications. Please view all of the available options and details at WWW.HIVIZLEDS.COM P/N P-OEBRACKET-0916FSD-W 14

(703) 662-3458


LONG DISTANCE!

FT-B-72-W SHOWN

Check out A-Pillar Mounting on Pg. 40

FT-B-46-ML3 SHOWN w/ P-OEBRACKET-0916FSD-B

FT-72-ML-3PKIT-W IN USE!

FT-B-72-ML-B SHOWN

PRODUCT VIDEOS

Visit our website to see multiple videos of our Brow Lights in action! WWW.HIVIZLEDS.COM

FT-B-72-ML-3PKIT-W SHOWN HIVIZLEDS.COM

15


MINI BROW LIGHTS

4”-40” LOW PROFILE SCENE LIGHT BARS The FireTech Mini Brow LED Scene Light Bars excel where normal scene lights won’t cut it. By having a shallow mounting depth, the Low Profile FireTech MiniBrow is able to provide powerful light output while integrating neatly to the lines of your apparatus cab and body.

4” 3 LED 1,584 LM 8” 6 LED 3,168 LM

E-MARK APPROVED!

11” 9 LED 4,752 LM 18” 15 LED 7,920 LM

MOUNTING TO A VERTICAL SURFACE? Check out the FT-P-LFOOT-* (color) mounting accessory!

21” 24 LED 12,672 LM 30” 27 LED 14,256 LM 40” 33 LED 17,424 LM

CONFIGURE PART # LEDS | BEAM | HOUSING

FT-MB-_____-_____-_____ 3* 6* 9 15 24* 27* 33 39*

S F FT

SPECIFICATIONS

B W

DIMENSIONS EXAMPLE CONFIGURATION

FT-MB-33-S-W

MINI BROW - 33 LED - SPOT - WHITE

S = SPOT F = FLOOD FT = COMBO * Designates Special Order only. Lead time of up to 8-12 weeks

Each brow light varies in technical specifications. Please view all of the available options and details at WWW.HIVIZLEDS.COM

16

(703) 662-3458

2.45”


MINI BROW TRUNNION -BROW PRECISION ADJUSTABLE MOUNTS MINI LIGHT

The Mini-Brow Trunnion is based on the same extruded housing as the rest of the FireTech Brow Light family, but offers a precision adjustable Trunnion mount. The Trunnion series is an excellent choice when mounting on vertical surfaces or in locations where accessing the back side of the mounting surface is impossible.

14” 9 LED 4,752 LM

CONFIGURE PART # LEDS

17” 12 LED 6,336 LM

BEAM HOUSING

FT-MB-_____-TR-_____-_____ 9 12 18

24” 18 LED 9,504 LM

S F FT

B W

60 POINT LOCKING AIMING SYSTEM

The strudy Trunnion bracket allows the Mini Brow Light to be precisely aimed regardless of mounting location. Enjoy full rotation flexibility from an ultra low profile housing.

HIVIZLEDS.COM

17


DOUBLE STACK MINI BROWS DOUBLE HEIGTH WITH TWICE THE LEDS

The FireTech Mini Brow LED Scene Light Bars excel where normal scene lights won’t cut it. By having a shallow mounting depth, the Low Profile FireTech MiniBrow is able to provide powerful light output while integrating neatly to the lines of your apparatus cab and body.

MIX AND MATCH!

Combine various lengths of mini brow lights in order to get the perfect solution for your fire apparatus.

4” 2 ROWS OF 3 LEDS 3,168 LM 8” 2 ROWS OF 6 LEDS 6,336 LM 11” 2 ROWS OF 9 LEDS 9,504 LM 18” 2 ROWS OF 15 LEDS 15,840 LM 21” 2 ROWS OF 18 LEDS 19,008 LM 30” 2 ROWS OF 27 LEDS 28,512 LM 40” 2 ROWS OF 36 LEDS 38,016 LM 50” 2 ROWS OF 45 LEDS 47,520 LM

CONFIGURE PART # LEDS (X 2 ROWS) | BEAM | HOUSING

FT-MB-2._____-_____-_____ 6 9 15 18 27 36 45

S F FT

SPECIFICATIONS

B W

DIMENSIONS EXAMPLE CONFIGURATION

FT-MB-2.18-F-W

MINI BROW - DOUBLE STACK 2 ROWS OF 18 LEDS - FLOOD - WHITE (36 LEDS TOTAL)

S = SPOT F = FLOOD FT = COMBO

Each brow light varies in technical specifications. Please view all of the available options and details at WWW.HIVIZLEDS.COM

18

(703) 662-3458


FT-MB-2.18-FT-W

FT-MB-2.36-F-W

HIVIZLEDS.COM

19


SURFACE MOUNTED SCENE LIGHTING THE PERFECT SOLUTION FOR THE SIDES AND BACK OF YOUR APPARATUS

Ever since our entry in to the Fire market in 2011, our customers have been asking for a non-recessed Surface Mounted LED Scene light. 2017’s the year: Introducing the Guardian Surfae Mounted LED Scene Light!

INDUSTRY STANDARD SIZE

The Guardian LED scene light uses a 7.25”x 5.25” mounting hole layout which matches the most common 7x9 “900 series” fixtures in the industry. This uniformity across the industry makes the Guardian Scene Light a perfect selfinstallable replacement, all without needing to drill any new holes in your rig.

TWO MODELS TO FIT ANY BUDGET!

The Guardian LED Scene light is offered in two versions; the Guardian (standard), and the Guardian “Elite.” The Guardian LED Surface mount scene light will produce close to 6,000 measured lumens of light output and is the perfect solution for your EMS fleet or when retrofitting Fire Apparatus on a conservative budget.

MODELS ITEM #

DESCRIPTION

FT-GSM FT-GESM

Guardian LED Surface Mount; 6.5K lm DC Power Guardian Elite LED Surface Mount; 12.5K lm DC Power

FT-SL-GSM-* FT-SL-GESM-* FT-SL-GSM-*-110 FT-SL-GESM-*-110

Pole Mounted Guardian LED Scene Light; 6.5K lm DC Pole Mounted Guardian LED Scene Light; 12.5K lm DC Pole Mounted Guardian LED Scene Light; 6.5K lm AC Pole Mounted Guardian LED Scene Light; 12.5K lm AC

* = HOUSING COLOR OPTION. W= WHITE B= BLACK

“SL” VERSIONS OF FIXTURE COMING SOON

The Guardian “Elite” will produce an earth shattering 12,500 MEASURED lumens, which compares favorably against fixtures commonly advertised in the fire industry as 20,000 lumens or more.

20

(703) 662-3458


GUARDIAN GUARDIAN ELITE - HIGH OUTPUT EQUIVALENT LUMENS MEASURED LUMENS WATTAGE AMPERAGE INPUT VOLTAGE

20,500 12,290 125W 10.41A 9-32V DC

GUARDIAN - STANDARD OUTPUT EQUIVALENT LUMENS MEASURED LUMENS WATTAGE AMPERAGE INPUT VOLTAGE

10,000 6,500 70W 5.83A 12V DC

PRECISION OPTICS, ALIGNED FOR OPTIMAL LIGHT PLACEMENT

Using an angled mounting plane for the LED Circuit Board and Drivers, the Guardian LED Scene Light shines more light in the areas where you need it! Building a rig with roll up doors? Or an ambulance? The Light Output hugs the side of your rig illumination near the truck, while the long-distance LEDs project light away from the truck on to the scene. Its a delicate balancing act, but the guardian has your back.

MORE LIGHT, LESS POWER

The Guardian Elite produces as much measurable light as fixtures advertised as 20,000 lumens in the fire industry. However, the Guardian Elite produces that light using close to 90 watts (7.5A) LESS power per fixture, at 12v DC. What does this mean for you? It often means when building a truck with lots of DC loads, you will be less likely to run in to amperage load-chart or electrical system limitations due to the Scene Lighting package. Less Power = Less Heat. By keeping the circuit temperature low, the FireTech Guardian LED Surface Mounted Scene can offer sustained light output regardless of runtime on your incident.

NFPA 1901 (FIRE), NFPA 1916 AND GSA KKK (AMBULANCE) COMPLIANT! HIVIZLEDS.COM

21


RECESSED / SEMI-RECESSED SIDE SCENE LIGHTING

FT-MB-2.15-*-*-CPREC

REQUIRES LESS THAN 2” MOUNTING DEPTH

LEDS RAW LUMENS EFFECTIVE LUMENS* OPT. HOUSING COLORS OPT. BEAM PATTERNS DIMENSIONS WATTAGE AMP DRAW (@12V) INPUT VOLTAGE CONNECTOR EMC APPROVAL VIBRATION RATING

30 X 5W CREE 15,840 11,880 BLACK OR WHITE SPOT, FLOOD, COMBO 20.26” X 6.13” X 4” 150W 12.5A 9-32V DC DEUTSCH DT04-2P CISPR25 CLASS 1 / CE 21.2 Grms

CONFIGURE PART #

20.26”

7.50”

6.13”

3.05” .95”

6.13” 45.0°

FT-MB-2.15-*-*-CPREC -OPTICS (S, F, FT) -HOUSING COLOR (B, W)

150 WATT SEMI-RECESSED SCENE LIGHT

The FireTech FT-MB-2.15-*-CPREC is a 150 Watt Simi-Recessed FireTech Double Sack mini brow light. This fixture mounts easily to the side of your apparatus and maintains the fixture’s native adjustability. Once it’s installed, just aim the light where you need it and lock down the mounting feet. The FT-MB-2.15-CPREC is the perfect addition to the side of any apparatus; new or old.

22

(703) 662-3458


FULLY RECESSED; STICKS OUT LESS THAN 1/4” FT-WL-X-9-CPREC-FIX

FIXED MOUNT FT-WL-X-9-CPREC-ADJ

ADJUSTABLE MOUNT

LEDS RAW LUMENS EFFECTIVE LUMENS* OPT. HOUSING COLORS OPT. BEAM PATTERNS DIMENSIONS WATTAGE AMP DRAW (@12V) INPUT VOLTAGE CONNECTOR EMC APPROVAL VIBRATION RATING

36 X 5W CREE 19,008 13,305 BLACK OR WHITE SPOT, FLOOD, COMBO 24.53” X 7.28” X 4.72” 180W 15A 9-32V DC DEUTSCH DT04-2P CISPR25 CLASS 1 / CE 21.2 Grms

CONFIGURE PART # LEDS RAW LUMENS EFFECTIVE LUMENS* OPT. HOUSING COLORS OPT. BEAM PATTERNS DIMENSIONS WATTAGE AMP DRAW (@12V) INPUT VOLTAGE CONNECTOR EMC APPROVAL VIBRATION RATING

LEDS RAW LUMENS EFFECTIVE LUMENS* OPT. HOUSING COLORS OPT. BEAM PATTERNS DIMENSIONS WATTAGE AMP DRAW (@12V) INPUT VOLTAGE CONNECTOR EMC APPROVAL VIBRATION RATING

4.72”

7.74”

7.73”

3.22

FT-WL-X-9-*-*-CPREC-FIX -OPTICS (S, F, FT) -HOUSING COLOR (B, W)

9 X 7W CREE 4,500 4,250 BLACK OR WHITE SPOT, FLOOD, COMBO 7.74” X 7.73” X 3.22” 63W 5.25A 11-65V DC DEUTSCH DT04-2P CISPR25 CLASS 1 / CE 21.2 Grms

CONFIGURE PART #

24.53”

FT-MB-2.18-*-*-CPREC -OPTICS (S, F, FT) -HOUSING COLOR (B, W)

9 X 7W CREE 4,500 4,250 BLACK OR WHITE SPOT, FLOOD, COMBO 7.74” X 7.73” X 3.22” 63W 5.25A 11-65V DC DEUTSCH DT04-2P CISPR25 CLASS 1 / CE 21.2 Grms

CONFIGURE PART #

4.92” 7.28”

FT-MB-2.18-REC

7.74”

7.73”

3.22

FT-WL-X-9-*-*-CPREC-ADJ -OPTICS (S, F, FT) -HOUSING COLOR (B, W) HIVIZLEDS.COM

23


LED HEADLIGHTS

DOT APPROVED DIRECT REPLACEMENTS

FireTech LED Headlights are a simple way to dramatically boost the total light output of your emergency vehicle. These headlight fixtures are a direct replacement for most of the stock headlights found on todays apparatus’s.

THE CAMERA DOESN’T LIE

The photos shown below were taken with the exact same camera settings. Take a look for yourself and see how the Firetech LED Headlight compares to a stock headlight! The FireTech headlights were designed using an angled optic to fill the area between the bumper and the bottom of the low beam. In the Emergency Services world, this area is often where manpower and accountability is set up when parked, or when moving slowly, is the area most dangerous on the fireground.

FIRETECH 7” FT-7RD-WR

STOCK

MODELS ITEM # FT-4X6-HL FT-4X6-H FT-4X6-4KIT FT-4X6-HL-2KIT

DESCRIPTION 4X6 Headlight DOT High / Low (For Low Beam Use) 4X6 Headlight DOT High Beam Only 4X6 Kit Containing 4 Headlights; 2 High/Low & 2 High Only 4X6 Kit Containing 2 High / Low Headlights

FT-575RD-HL FT-575RD-HL-2KIT

5.75” Headlight DOT High / Low (For Low Beam Use) 5.75” Kit Containing 2 High / Low Headlights

FT-7RD-HL FT-7RD-HL-2KIT

7” Headlight DOT High / Low (For Low Beam Use) 7” Headlight DOT High / Low (For Low Beam Use)

24

(703) 662-3458


4” X 6” LED HEADLIGHT RAW LUMENS 2,500 USABLE LIGHT 1,000 FEET OPT. HOUSING COLORS BLACK OR WHITE BEAM MODES HIGH/LOW, PARK LAMP, HIGH ONLY DIMENSIONS 6.57” X 3.94” X 3.29” WATTAGE 25W AMP DRAW (@12V) 2.08A INPUT VOLTAGE 9-32V DC CONNECTOR DEUTSCH DT04-2P EMC APPROVAL CISPR25 CLASS 1 / CE VIBRATION RATING 15.6 Grms

6.57”

3.94”

3.29”

7” & 5.75” ROUND LED HEADLIGHT 7” ROUND LED HEADLIGHT 4,210 HIGH/LOW, PARK LAMP 43W 3.58A 9-32V DC

5.75” ROUND LED HEADLIGHT 4,210 HALO, LOW, HIGH 43W 3.58A 9-32V DC

5.65”

2.88”

5.65”

RAW LUMENS BEAM MODES WATTAGE AMP DRAW (@12V) INPUT VOLTAGE

3.86”

6.96”

RAW LUMENS BEAM MODES WATTAGE AMP DRAW (@12V) INPUT VOLTAGE

6.96”

BUILT IN LED PARK LAMP

FireTech headlights are equipped with an extremely bright LED halo ring that serves as a DOT “P” Park lamp. The ring is powered independently from the headlight and many customers have connected to an optional external flash module for wig-wag effect when the Emergency Master is activated.

HIVIZLEDS.COM

25


WORK LIGHT XTREME SIMPLY THE BEST

The FireTech lineup from Hiviz LEDs includes a complete range of Work and Utility LED lights. Put these fixtures to work in nearly any setting and you’ll be impressed by the outstanding light output, diverse mounting configurations, minimal amp draw, and durable housing. The FireTech WL-X range is a premium lighting offering designed specifically for use in the Fire and Emergency vehicle markets.

PRODUCT CONFIGURATIONS NUMBER OF LEDS

AVAILABLE BEAM PATTERNS

20 LED 16,000 RAW LUMENS WL-X-20 140 WATTS

SPOT LONG DISTANCE

12 LED 9,600 RAW LUMENS WL-X-12 84 WATTS

FLOOD AMPLE COVERAGE

9 LED WL-X-9

7,200 RAW LUMENS 63 WATTS

FIRETECH OPTICS BEST OF BOTH

5 LED WL-X-5

4,000 RAW LUMENS 35 WATTS

4 LED WL-X-4

2,000 RAW LUMENS 20 WATTS

26

(703) 662-3458

HOUSING COLOR OPTIONS

CONFIGURE YOUR PART NUMBER # OF LEDS | BEAM | HOUSING

FT-WL-X-_____-_____-_____ 4 S B 5 F W 9 FT 12 20

EXAMPLE FT-WL-X-9-S-W

WORK LIGHT XTREME - 9 LED - SPOT - WHITE HOUSING


AERIAL DEVICE TIP LIGHTING

GENERAL SCENE LIGHTING

HOSEBED WORK AREA

LADDER TRACKING LIGHTS

10X10 AREA AT REAR OF TRUCK

MARINE OR OTHER S.A.R.

SKID UNITS AND FORESTRY

...AND MORE!

FIVE MOUNTING CONFIGURATIONS

The WL-X Range of products was specifically designed for use by OEM Fire Apparatus integrators. We know every fire truck is a bit different, with the WL-X range, you can attach either of the 2 supplied mounting brackets to the fixture, in up to 5 different locations. The fixtures are designed with threaded mounting ports on all faces to allow expansion or adoption to fit your needs.

NFPA 1901 MEASUREMENT COMPLIANCE

In 2016 the NFPA 1901 standard moved to define how “Lumens” were to be measured. In the most simple terms, this change requires manufacturers to test fully assembled fixtures in a light tunnel before taking actual measurements AFTER the fixture has been “burned in” to its maximum operating temperature. It also requires device manufacturers to make the results of their test available upon request. The entire WL-X range has been built and tested to comply with these new measurement standards, and we’re happy to share the results of those tests with the world!

CISPR 25 & IP68 / 69K RATED

Service life of the average Fire apparatus in the US is 25 years. The WL-X fixtures were designed with technology to support an extremely long service life; from patented Prime Drive electronic thermal management system to ultra-quiet CISPR 25 driver circuitry, even our IP68 and IP69 rated housings, these fixtures were designed to last. HIVIZLEDS.COM

27


FIRETECH WL-X SERIES WORK LIGHT XTREME

FT-WL-X-9-SH 4.45”

LEDS RAW LUMENS EFFECTIVE LUMENS* OPT. HOUSING COLORS OPT. BEAM PATTERNS DIMENSIONS WATTAGE AMP DRAW (@12V) INPUT VOLTAGE CONNECTOR EMC APPROVAL VIBRATION RATING

HANDLE MOUNT

9 X 7W CREE 7,200 5,734 BLACK OR WHITE SPOT, FLOOD, COMBO 4.46” X 10.13” X 3.71” 63W 5.26A 9-32V DC DEUTSCH DT04-2P CISPR25 CLASS 1 / CE 21.2 Grms

10.13”

3.71”

THE ULTIMATE ADJUSTABLE WORK LIGHT

Coupled to this innovative swivel/handle assembly, the WL-X-9 work light is one of the most versatile utility fixtures on the market. It far exceeds the NFPA 1901 Ch 13 requirements as a rear work light producing close to 4500 measured lumens at the source. With the adjustable mount, you can point this fixture at whatever you are working on without having to unbolt the light or use any tools. erial? of an A the tip n o g Usin er “-S” nd eith e m m o We rec s! ” Optic ot “-FT

SWIVEL MOUNT

This fixture has an integrated switch in the back so no need for sophisticated wiring on basic utility vehicles. It works great as an Aerial Tip light, as a rear hose bed or utility light, or as a scene light in virtually any area on your rig. What really makes the WL-X-9 stand out from it’s siblings is that just a single fixture of this light is NFPA compliant at the tip of an aerial.

28

(703) 662-3458


FT-WL-X-20 LEDS RAW LUMENS EFFECTIVE LUMENS* OPT. HOUSING COLORS OPT. BEAM PATTERNS DIMENSIONS WATTAGE AMP DRAW (@12V) INPUT VOLTAGE CONNECTOR EMC APPROVAL VIBRATION RATING

20 X 7W CREE 16,000 11,270 BLACK OR WHITE SPOT, FLOOD, COMBO 9.37” X 6.59” X 4.13” 140W 11.66A 9-32V DC DEUTSCH DT04-2P CISPR25 CLASS 1 / CE 21.2 Grms

LEDS RAW LUMENS EFFECTIVE LUMENS* OPT. HOUSING COLORS OPT. BEAM PATTERNS DIMENSIONS WATTAGE AMP DRAW (@12V) INPUT VOLTAGE CONNECTOR EMC APPROVAL VIBRATION RATING

12 X 7W CREE 9,600 6,697 BLACK OR WHITE SPOT, FLOOD, COMBO 6.06” X 5.24” X 3.54” 84W 7.0A 9-32V DC DEUTSCH DT04-2P CISPR25 CLASS 1 / CE 21.2 Grms

FT-WL-X-12

FT-WL-X-9

HANDLE MOUNTS AVAILABLE! SEE PAGE 38

LEDS RAW LUMENS EFFECTIVE LUMENS* OPT. HOUSING COLORS OPT. BEAM PATTERNS DIMENSIONS WATTAGE AMP DRAW (@12V) INPUT VOLTAGE CONNECTOR EMC APPROVAL VIBRATION RATING

9 X 7W CREE 7,200 5,734 BLACK OR WHITE SPOT, FLOOD, COMBO 5.71” X 5.12” X 3.33” 63W 5.26A 9-32V DC DEUTSCH DT04-2P CISPR25 CLASS 1 / CE 21.2 Grms

* “Effective Lumens” are based on the average measured total luminous flux seen per chip of this range. Actual test results for each assembled fixture are avaliable on request per NFPA 1901 19.18.6.3

HIVIZLEDS.COM

29


FT-WL-X-5 LEDS RAW LUMENS EFFECTIVE LUMENS* OPT. HOUSING COLORS OPT. BEAM PATTERNS DIMENSIONS WATTAGE AMP DRAW (@12V) INPUT VOLTAGE CONNECTOR EMC APPROVAL VIBRATION RATING

5 X 7W CREE 4,000 3,305 BLACK OR WHITE SPOT, FLOOD, COMBO 3.94” X 4.57” X 2.95” 35W 2.9A 9-32V DC DEUTSCH DT04-2P CISPR25 CLASS 1 / CE 21.2 Grms

LEDS RAW LUMENS EFFECTIVE LUMENS OPT. HOUSING COLORS OPT. BEAM PATTERNS DIMENSIONS WATTAGE AMP DRAW (@12V) INPUT VOLTAGE CONNECTOR EMC APPROVAL VIBRATION RATING

4 X 3W CREE 2,000 950 BLACK OR WHITE FLOOD 3.54” X 3.54” X 2.32” 12W 1.0A 9-32V DC DEUTSCH DT04-2P CISPR25 CLASS 1 / CE 21.2 Grms

LEDS RAW LUMENS EFFECTIVE LUMENS OPT. HOUSING COLORS OPT. BEAM PATTERNS DIMENSIONS WATTAGE AMP DRAW (@12V) INPUT VOLTAGE CONNECTOR EMC APPROVAL VIBRATION RATING

7 X 5W CREE 3,500 1,981 BLACK OR WHITE SPOT, FLOOD, COMBO @@@@ 35W 2.9A 9-32V DC DEUTSCH DT04-2P CISPR25 CLASS 1 / CE 15.6 Grms

FT-WL-X-4

FT-WL3500

30

(703) 662-3458

* “Effective Lumens” are based on the average measured total luminous flux seen per chip of this range. Actual test results for each assembled fixture are avaliable on request per NFPA 1901 19.18.6.3


BEAM PATTERNS WORK & UTILITY LIGHTS FT-WL-X-20

FT-WL-X-12

SPOT BEAM PATTERN

SPOT BEAM PATTERN

FLOOD BEAM PATTERN

FLOOD BEAM PATTERN

FT-WL-X-9

FT-WL-X-5

SPOT BEAM PATTERN

SPOT BEAM PATTERN

FLOOD BEAM PATTERN

FLOOD BEAM PATTERN

FT-WL-X-4 FLOOD BEAM PATTERN

FT-WL3500 SPOT BEAM PATTERN

FLOOD BEAM PATTERN

HIVIZLEDS.COM

31


COMPARTMENT / UNDERCARRIAGE LIGHTING EFFICIENT & COMPACT LIGHTS

FT-AQX SHOWN

FT-CU-HD AVAILABLE IN: 7.5”,

48”

12”, 24”, 36” , 48”

This compartment light was designed specifically to ensure proper heat transfer from the LEDs to the housing, preventing sections from burning out due to trapping the heat in epoxy encapsulation. With the FireTech Compartment light, you will never see sections unhooking from each other, or pieces of the light going out. Mount it inside or out, we’ll stand behind it forever.

36”

LENGTH

-AVAILABLE IN 7.5”, 12”, 24”, 36”, 48” -LESS THAN ONE INCH TALL! -GREAT FOR UNDERCARRIAGE OR COMPARTMENT

24” 12” 7.5”

32

HD EXTRUDED ALUMINUM COMPARMENT STRIP LIGHT

(703) 662-3458

FT-CU-HD-____ 7.5 12 24 36 48


FT-AQX SUBMERSIBLE UP TO 100’

LEDS RAW LUMENS EFFECTIVE LUMENS OPT. HOUSING COLORS OPT. BEAM PATTERNS NUMBER OF LIGHTS WATTAGE AMP DRAW (@12V) INPUT VOLTAGE CONNECTOR EMC APPROVAL VIBRATION RATING

6 X 3W CREE 1,500 1,050 WHITE 180° ULTRA WIDE FLOOD 1 22W 1.833A 11-32V DC DEUTSCH DT04-2P CISPR25 CLASS 1 / CE 15.6 Grms

4.13”/105mm

4.13”/105mm

FT-PDW-B

THE LAST UNDERCARRIAGE LIGHT YOU’LL EVER PURCHASE

1.25”/32mm

HD ALUMINUM COMPARTMENT LED LIGHT POD -180° PURE FLOOD ILLUMINATION -SMD LEDS PROVIDE 140 LUMENS (EA) -1.76” DIAMETER - GREAT FOR SMALL COMPARTMENTS, DOME LIGHTS, OR ENGINE COMPARTMENTS

*SOLD AS 1

FT-CU-P500

USE ULTRA-WIDE SCATTERED LIGHT TO YOUR ADVANTAGE LEDS 32 ULTRAWIDE SMD LEDS RAW LUMENS 500 EFFECTIVE LUMENS 456 OPT. HOUSING COLORS BLACK OPT. LIGHT COLORS WHITE, AMBER, R, G, B BEAM PATTERN ULTRA-WIDE FLOOD DIMENSIONS 3.19” X 3.52” X 0.91” WATTAGE 6W AMP DRAW (@12V) 0.5A INPUT VOLTAGE 9-32V DC CONNECTOR DEUTSCH DT04-2P VIBRATION RATING 21.2 Grms

HIVIZLEDS.COM

33


POLE-MOUNTED SCENE LIGHTING COVER MORE AREA WITH MORE LIGHT.

Pole mounted Scene Lights are often the most utilized equipment on emergency scenes. Scene Lights from FireTech are well known for packing a big punch while covering a large area.

FT-SL-X-15-FT-B

SCENE LIGHTS (FT-SL)

LED Scene Lights are used to enhance visibility on virtually every fire scene. Whether you’re tasked with cutting a patient from a mangled automobile, or are conducting an overhaul operation after putting out the blaze, thscene lightingn will make your job easier.

WORK LIGHTS (FT-WL)

The NFPA 1901 standard requires apparatus builders to install work lights that illuminate the hose bed, rear work area, and any surface where a firefighter may stand to 20-30 lux. Work lights are a great way to enhance visibility on any fire scene.

3/4” NPT POLE MOUNT

All FireTech branded LED Scene lights are designed to mount to the industry standard 3/4” NPT pole mount. Just un-screw your old fixture, inspect the wiring, and screw the new FireTech fixture in its place. Its that easy.

34

(703) 662-3458

CONFIGURE PART # (OPT. GEN) | LEDS | BEAM | (OPT) | HOUSING

FT-SL-X-_____-____-110-_____ 15 18 30

S F FT

“-110” DESIGNATES 90-277V AC POWER

B W

S = SPOT F = FLOOD FT = COMBO

“X” DESIGNATES 7W LEDS / HIGH OUTPUT EXAMPLE CONFIGURATION

FT-SL-15-F-110-W

SCENE LIGHT - 15 LED - FLOOD - AC POWER MODULE - WHITE HOUSING


FT-SL-15 LEDS RAW LUMENS EFFECTIVE LUMENS OPT. HOUSING COLORS OPT. BEAM PATTERNS DIMENSIONS WATTAGE AMP DRAW (@12V) INPUT VOLTAGE CONNECTOR EMC APPROVAL VIBRATION RATING

SINGLE GASKET INTERFACE

Used in harsh environments for over 7 years in hundreds of mines worldwide, the FT-SL-15 is the most reliable LED scene light ever produced. The design uses a single gasketed interface which significantly enhances the ingress protection of the housing. This fixture is the champion of the HiViz LED Lighting “FireTech” family.

30 X 5W CREE 15,840 11,100 BLACK OR WHITE SPOT, FLOOD, COMBO 11.75” X 7.54” X 4.94” 150W 12.5A 11-65V DC / 90-277V DC DEUTSCH DT04-3P CISPR25 CLASS 1 / CE 21.2 Grms

NEED MORE LIGHT? Specify “FT-SL-X-15-*-*” for Gen 2 LEDs, producing comparable light to fixtures advertised as 28,000 lumens in the fire industry! Complete specifications of “X” version available online at www.hivizleds.com!

FT-SL-30 LEDS RAW LUMENS EFFECTIVE LUMENS OPT. HOUSING COLORS OPT. BEAM PATTERNS DIMENSIONS WATTAGE AMP DRAW (@12V) INPUT VOLTAGE CONNECTOR EMC APPROVAL VIBRATION RATING

DO YOU WANT THE BRIGHTEST?

At 22,200 effective lumens, the FT-SL-30 is up to 1.5 times as bright as the brightest competitors 28,000 RAW lumen LED scene light. The FT-SL-30 is not your grandmothers scene lights, it’s the largest and brightest LED scene light ever manufactured.

60 X 5W CREE 31,680 22,200 BLACK OR WHITE SPOT, FLOOD, COMBO 17.5” X 7.05” X 3.30” 300W 25A 11-65V DC DEUTSCH DT04-2P CISPR25 CLASS 1 / CE 21.2 Grms

WIDE VARIETY OF OPTICS AVAILABLE UNBREAKABLE POLYCARBONATE LENS STRENGTHENED TRUNNION BRACKET REINFORCED GASKETED BEZEL OUTSHINE AND OUTLAST

HIVIZLEDS.COM

35


LONG RANGE LIGHT CANNONS INCREDIBLE DISTANCE. SEE IT FIRST!

Every second counts when responding to an Airport Rescue Firefighting incident; and lets face it, there’s never a hydrant conveniently located next to a downed aircraft. The average ARFF truck holds between 2,000 and 3,000 gallons of water, and is capable of dumping that water in less than 2 minutes. We’d be willing to bet you have never heard the term “Ready. FIRE!, Aim.” The order in which we do things DOES make difference. So why do we say it that way? In the time it takes to properly aim and align the remote controlled turret nozzle while modulating, ARFF operators can waste up to 10% of their available water supply. With the FireTech Light Canon, you can aim the turret, THEN turn the water on, minimizing waste and putting more water from your tank on the target.

FT-LC-8 IN USE

SINGLE SOURCE LED

FireTech LED Light Cannons create all of their light output from one single source LED. By using one LED, Cannons are able to produce a more focused beam pattern.

IRIS REFLECTOR

Cannons are able to reach long distances because of the specially engineered IRIS Re ector technology that produces range never before seen from a single source LED.

OPTIONAL COLOR FILTERS

Lowering the color temperature of the light source helps reduce the amount of reflection from the spray. Using a red or amber color filter can significantly increase visability while modulating.

36

(703) 662-3458


FT-LC-8 LEDS RAW LUMENS USABLE LIGHT OPT. HOUSING COLORS OPT. BEAM PATTERNS DIMENSIONS WATTAGE AMP DRAW (@12V) INPUT VOLTAGE CONNECTOR EMC APPROVAL VIBRATION RATING

1 X 90W LUMINUS 7,200 3,200 FEET BLACK OR WHITE 10° 8.70” X 7.93” X 10.57” 90W 5.26A 9-32V DC DEUTSCH DT04-2P CISPR25 CLASS 1 / CE 15.6 Grms

LEDS RAW LUMENS USABLE LIGHT OPT. HOUSING COLORS OPT. BEAM PATTERNS DIMENSIONS WATTAGE AMP DRAW (@12V) INPUT VOLTAGE CONNECTOR EMC APPROVAL VIBRATION RATING

1 X 50W LUMINUS 3,200 2,500 FEET BLACK OR WHITE 10°, 20° 6.70” X 6.30” X 8.82” 50W 4.17A 9-32V DC DEUTSCH DT04-2P CISPR25 CLASS 1 / CE 15.6 Grms

LEDS RAW LUMENS USABLE LIGHT OPT. HOUSING COLORS OPT. BEAM PATTERNS DIMENSIONS WATTAGE AMP DRAW (@12V) INPUT VOLTAGE CONNECTOR EMC APPROVAL VIBRATION RATING

1 X 25W LUMINUS 2,500 1,000 FEET BLACK OR WHITE SPOT, FLOOD, COMBO 4.72” X 4.36” X 5.75” 25W 2.08A 9-32V DC DEUTSCH DT04-2P CISPR25 CLASS 1 / CE 15.6 Grms

FT-LC-6

FT-LC-4

HIVIZLEDS.COM

37


SPECIALTY LIGHTING

UNIQUE LIGHTING SOLUTIONS FOR UNIQUE APPLICATIONS

FT-WL-3500-C LEDS RAW LUMENS EFFECTIVE LUMENS OPT. HOUSING COLORS OPT. BEAM PATTERNS DIMENSIONS WATTAGE AMP DRAW (@12V) INPUT VOLTAGE CONNECTOR EMC APPROVAL VIBRATION RATING

6 X 5W CREE 2,460 1,698 BLACK OR WHITE FLOOD 5.83” X 5.51” X 4.88” 30W 2.6A 9-32V DC DEUTSCH DT04-6P CISPR25 CLASS 1 / CE 15.6 Grms

VISIBILITY IS THE KEY TO SAFETY

Whether it’s lighting a dark area at night, or providing a live video feed from one side of the apparatus to the other during the day, the FireTech FT-WL-3500-C has you covered. The FT-WL-3500-C combines all the functionality of a FireTech work light with a centrally integrated full color camera. This camera can be wired into a display (like the Class 1 “UltraView”) on a multiplex fire apparatus. For rigs without a multiplex backbone (or on vehicles without a display on the dash) a live video monitor can be installed and wired to the camera

MODELS ITEM # FT-WL-3500-C-F-B FT-WL-3500-C-F-W FT-WL-3500-RC-F-B FT-WL-3500-RC-F-B

38

(703) 662-3458

DESCRIPTION Forward Facing Camera, Normal Image Forward Facing Camera, Normal Image Rear Facing Camera, Mirror Image Rear Facing Camera, Mirror Image

FULL-COLOR CAMERA GLARE SHIELD INCLUDED EASY INSTALL WITH EXISTING DISPLAY 7” STANDALONE DISPLAY OPTIONAL POWERFUL LEDS FOR NIGHT USE


MINI BROW CAMERA LIGHT LEDS 18 X 5W LEDS - 6 X 3W LEDS RAW LUMENS 9,504-19,008 EFFECTIVE LUMENS 6,652 - 13,305 OPT. HOUSING COLORS BLACK OR WHITE OPT. BEAM PATTERNS SPOT, FLOOD, COMBO DIMENSIONS 26.39 - 49.09 INPUT VOLTAGE 9-32V DC CONNECTOR 2X DEUTSCH DT04-2P 1X RCA, 1X 12V CANON

CONFIGURE USING ANY 2 MINI-BROW LIGHTS

*SEE WEBSITE FOR CONFIGURATION TOOL

THE MB24-C-FR

We strive to bring the most innovative products to the market. The MiniBrow Camera Integration kit combines the powerful MiniBrow serirs of fixtures with a centrally mounted wide angle adjustable video camera. It’s the perfect way to regain the backup camera functionality after replacing a truck with a integrated tailgate camera. Additionally, this camera can be wired into a display such as the Class 1 “UltraView” on a multiplex fire apparatus. For smaller rigs, the MB24-C-FR can be wired to the factory harness for seamless integration with the trucks factory installed backup camera system.

MODELS ITEM # FT-MB-18-C-F-* FT-MB-24-C-F-* FT-MB-30-C-F-* FT-MB-36-C-F-*

DESCRIPTION 2x FT-MB-18-F-* + Camera Bridge 2x FT-MB-24-F-* + Camera Bridge 2x FT-MB-30-F-* + Camera Bridge 2x FT-MB-36-F-* + Camera Bridge

LENGTH 26.39” Overall 33.95” Overall 41.51” Overall 49.09” Overall

OPTIONAL FLASHING END-CAPS PACKAGED WITH 24 LED MINI BROW EASY INSTALL WITH EXISTING DISPLAY 7” STANDALONE DISPLAY OPTIONAL IDEAL BACK UP CAMERA

HIVIZLEDS.COM

39


RETROFIT LIGHTING

RE-USE YOUR EXISTING HOUSING FOR A SIMPLIFIED INSTALLATION

FT-P48-NFKIT

MODELS ITEM # FT-P46-F FT-P46-S FT-P-48-NFKIT

40

(703) 662-3458

DESCRIPTION 1x Flood Fixture 1x Spot Fixture 2x Flood, 1x Spot Fixture

REDUCED POWER CONSUMPTION DIRECT DROP-IN FOR ANY PAR 46 FIXTURE SPOT OR FLOOD CONFIGURATION MADE FROM SOLID ALUMINUM


FT-P48 THE PAR 46 UPGRADE

The Par 46 sealed beam fixture has been a staple in the fire service for years. If you have this type of light on your rigs and are looking for an economical way to upgrade, the FT-P48 is designed for you. Just pop the old lamp out, swap the new LED module in, connect the wires and you’re good to go! Up to 10 times the light output while only drawing 40w.

LEDS RAW LUMENS EFFECTIVE LUMENS OPT. HOUSING COLORS OPT. BEAM PATTERNS REPLACES WATTAGE

4 X 10W P7 LEDS 3,600 2,160 BLACK OR WHITE SPOT, FLOOD ANY PAR46 FIXTURE 40W

FT-P48-NFKIT THE NIGHTFIGHTER PACKAGE

Many fire apparatus were manufactured with a 12v 3x head “NightFighter” Halogen scene light. If you have this type of light on your rigs and are looking for an economical way to upgrade, the FT-P46-NFKIT has your name all over it. This kit includes 2 FLOOD and 1 SPOT replacement modules that can be installed in your bays in under 20 mins. Just pop the old lamps out, swap the new LED modules in, connect the wires and you’re good to go! Up to 10 times the light output while only drawing 120w.

FT-P48-NFKIT LEDS RAW LUMENS EFFECTIVE LUMENS OPT. HOUSING COLORS OPT. BEAM PATTERNS REPLACES WATTAGE

12 X 10W P7 LEDS 10,800 6,480 BLACK OR WHITE SPOT, FLOOD ANY PAR46 FIXTURE 120W

HIVIZLEDS.COM

41


LIGHTING ACCESSORIES

MAKE YOUR MOUNTING AND INSTALLATION SIMPLE

B46 MOUNT IN USE

FORD SUPER DUTY A-PILLAR BROW LIGHT MOUNTING KIT

The FireTech Brow light can easily be mounted to the leading edge of your 08-16 Ford SuperDuty F-250-550 cab. This bracket kit allows installation of an ultra-low-profile brow light in your station, with basic tools and a couple hours of time. This particular configuration mates seemlessly to the FT-B-46-ML3 (with center 3 ID lights) or the FT-B-50 (no marker lights).

B46 A-PILLAR MOUNT

The 2009-2016 Ford Super Duty A-Pillar Brow Light Mounting Brackets are made from high quality US made steel material. The bracket kit installs in the door jam to allow protection from the elements and prevent water from leaking into your vehicle. Grip sert nuts are used to fasten into the body, some minor drilling is required, but allows a fast and simple installation that is super easy to service or remove later down the road.

MODELS

42

(703) 662-3458

P-OEBRACKET-0916FSD-B P-OEBRACKET-0916FSD-W FT-B-50-W-0916FSDKIT FT-B-50-B-0916FSDKIT FT-B-46-ML3-W-0916FSDKIT FT-B-46-ML3-B-0916FSDKIT

BRACKETS (BLACK) BRACKETS (WHITE) BRACKETS WITH 50” BROW LIGHT (NO MARKER LIGHTS) (WHITE) BRACKETS WITH 50” BROW LIGHT (NO MARKER LIGHTS) (BLACK) BRACKETS WITH 50” BROW LIGHT (3 MARKER LIGHTS) (WHITE) BRACKETS WITH 50” BROW LIGHT (3 MARKER LIGHTS) (BLACK)


BROW LIGHT MOUNTING BOLTS

MINIBROW LFOOT

FOR USE WITH LIGHT BARS 36” OR LESS ONLY

AVAILABLE IN SATIN BLACK OR GLOSS WHITE COLORS M10 X 1.5P 20MM THREAD - SOLD IN PAIRS FT-MBKIT-LPX FT-MBKIT-PX FT-MBECM FT-MB2ECM

DOUBLE MINIBROW MINIBROW OR B46 DOUBLE MINIBROW MINIBROW OR B46

LICENSE PLATE MOUNT

FT-LPBRKTMB9 (FT-MB-9 MINIBROW INCLUDED) FT-LPBRKT (BRACKET ONLY) EASILY MOUNT A FT-MB-9 (9 LED MINIBROW) TO THE LICENSE PLATE OF NEARLY ANY VEHICLE!

AVAILABLE IN SATIN BLACK OR GLOSS WHITE COLORS FT-MB-LFOOT-W FT-MB-LFOOT-B

WHITE FEET BLACK FEET

FT-WL-X HANDLE KIT

FT-WL-X-HANDLE FITS 9, 12, AND 20 LED WORK LIGHTS COMES WITH HANDLE AND MOUNTING BOLTS

HIVIZLEDS.COM

43


2017 HiViz LEDs FIRETECH Catalog  

2017 Scene Lighting catalog for HiViz LED Lighting's FireTech brand of lights. New for 2017: Guardian LED Surface Mount Scene Light, Recess...

Read more
Read more
Similar to
Popular now
Just for you