53
M o l di ng a n d Mo ld in g C aps Over 70 different moldings are available. The standard length is six inches. Four inch moulding piece are also available and are priced the same as six-inch moldings. Eight-inch and twelve-inch molding are special order items, please call for availability and lead time. Each molding style has a letter or number designation. Molding cap pieces are available for most of the molding styles. The word “cap� after the molding means the piece can be used as a vanity or kitchen cap. The drop of the cap varies depending on the molding piece. The edge cap generally has a one-inch lip. If the pieces are to be used as a wainscot, the cap lip can be made smaller. Please specify you exact requirements. Outside 90-degree corners, stop ends and picture frame corners (PFC) are available in all molding styles. A layout drawing may be necessary to communicate the exact type of picture frame corner required. During the firing process the glaze will run and pool in the lower recesses on molding pieces, especially those with curved surfaces. This causes some color variation on theses pieces. Debris and Vitrail glazes appear light and dark depending on the manner in which the glaze pools on each molding piece.
54
Moldings
1 X 6
2 X 6 Molding 1D
Molding 50
Molding C cap Molding 1D cap Molding G Molding 1F Half Round Molding 54 Molding U Molding 54 cap
Molding T cap Molding 78
1.2 5 X 6 Molding 1D
Ogee
Molding 1F Speed cap
1.5 X 6 Molding 76
2 . 25 X 6 Molding 45
Molding 40 cap Molding 45 cap Molding A Molding 93 Square cap Molding 93 cap Molding 69 Please Note: Sizes are approximate, Vitrail shrinks more than Debris molding tile heights are rounded up to nearest quarter inch (1/4�).
Moldings
2. 5 X 6 Molding C
Molding I
Molding 41 cap
Molding Q
Molding 46 cap
Molding Q cap
2 .2 5 X 6 Molding R cap Molding 49 cap
3 X 6 Molding 84
Molding D
Molding D cap
Double Radius Bullnose
Molding 27 cap
Molding 43
Molding F cap Molding 43 cap
Molding K Molding 47 cap
Molding K cap Molding 75
Molding P cap
55
56
Moldings
3 X 6
Molding O cap Molding 80
Molding 80 cap
Molding Q
Molding 81 cap
Sink cap
Molding 82
Sink cap out
Molding 94
3 . 25 X 6 Molding 85
Molding 95 Molding 85 with pearls
Molding 95 cap
Molding E
Molding B
Molding B cap
Molding E cap Molding E cap
Molding O-6 Molding B cap
Moldings
3 .5 X 6
57
Molding 96 4x6 Molding 33
Double Radius
Molding 77 4.25 x 6
Radius
Molding 44 4.5 x 6
3 .75 X 6
Molding 34 Molding 90 6x6
Molding 74
Molding 86
Molding 72 8 x 6’, 8 x 12 Debris only
Molding 92
Cove Base 4x6
Please Note: Sizes are approximate, Vitrail shrinks more than Debris - molding tile heights are rounded up to nearest quarter inch (1/4�).
58
Moldings Quarter Round 1.25 x 6
Molding 2E cap 2.5 x 6
Finger Cove 1x6
Beak 1x6
Molding I cap, 2.5 x 6
Molding 104 1x6 Molding 106 1x6
Molding O cap 2.5 x 6
Molding 99 1.25 x 6
Molding 103 1.25 x 6
Molding 105 3.25 x 6
Molding 100 1.5 x 6 Molding 101 4.5 x 6 Molding 102 1.875 x 6
Molding 97 2x6
Molding 98 2x6
Molding H 2x6
Molding 2E 2.5 x 6
Double Radius Bullnose 2..5 x 6�
Molding 63 6x6
Moldings Molding L - 6 x 6, 6 x 12”, Debris only
Double Reed - 4 x 6
RELIEF Chelsea M 1.5 x 6
Chelsea Cap M 1.5 x 6 Avignon M - 5 x 6 Molding M - 6 x 6, 6 x 12”, Debris only Avalon M 2.5 x 6
Egg and Dart M - 3.5 x 8
Cotswold M 2.5 x 6
Molding N - 6 x 6, 6 x 12”, Debris only
Vienna M 2.5 x 6
Molding 72 - 8 x 6, 8 x 12”, Debris only
Please Note: Sizes are approximate, Vitrail shrinks more than Debris - molding tile heights are rounded up to nearest quarter inch (1/4”).
59