Hot Deals June/July 2023

SB Cylindrical End/Double Cut Burr

For stainless steel & steel, 6mm shank. Surface milling, contours and right angle corners, straight burr.

BEANIE*

With any ELITE Rotary Burr or Annular Cutter *While stocks last.

SD Ball Shape Double Cut Burr

• For stainless steel & steel, 6mm shank.

• High quality tungsten carbide material.

• Rounded end milling, prep for welding.

SC Cylinder Ball Nose Double Cut Burr

• For stainless steel & steel, 6mm shank.

• High quality tungsten carbide material.

• Machining contours and circular arcs.

SF Tree Round Nose Double Cut Burr

• For stainless steel & steel, 6mm shank.

• Multi-angle contouring, rounded and narrow.

SE Oval Shape Double Cut Burr

• For stainless steel & steel, 6mm shank.

• High quality tungsten carbide material.

• Rounded contouring and end milling.

SH Flame Shape Double Cut Burr

• For stainless steel & steel, 6mm shank.

• High quality tungsten carbide material.

• Round edge, milling, prep for welding.

SG Tree Pointed Nose Double Cut Burr

• For stainless steel & steel, 6mm shank.

• Multi angle contouring, pointed and narrow places.

SL Cone Round Nose Double Cut Burr

• For stainless steel & steel, 6mm shank.

• Enlarging holes, rounded edges and narrow places.

135° split point self-centring minimises the need for centre punching. Reduces feed pressure for easier penetration and minimises wandering.

Silver series 502 Drills flow flute design for general purpose applications, hand & machine. For mild, cast steels, aluminium and stainless steel.

130° split point for faster and more precise drilling. Penetrates on contact, and minimises wandering.

Gold tungsten hi-molylodenum tool steel and heat treatment for extra wear.

Straight fully ground shank high quality HSS, manufactured to DIN388 standards.

• High performance, M2 temperature hardened material increases drill life.

• Self-centring 135° split point, to help penetrate with less pressure into the steel, and reduces wandering to give you clean, fast cutting.

• Bright finish for general purpose applications, hand and machine, for mild, cast steels, aluminium, and stainless steel.

• Standard: DIN338.

Packaging

• 1.0 - 8.0mm = 10Pcs/pack

• 8.5 - 13.0mm = 5Pcs/pack

Also available in imperial.

• Highest performance and extra wear resistant due to the gold tungsten hi-molybdenum tool steel, a special heat treatment, and black oxide finish to help hold the lubrication on the drill.

• 5-13mm with flat shank (1-4.9 standard shank).

• Drills suitable for all hand and machine, for mild, cast steels, aluminium, and stainless steel.

Packaging

• 1.0 - 8.2mm = 10Pcs/pack

• 8.5 - 13.0mm = 5Pcs/pack

Also available in imperial.

Black oxide flutes to help hold lubrication.

Special cutting lip on fluting, for fast removal.

Drill pricing shown in pack rates

Drill pricing shown in pack rates 3 flats on the shank means no slipping in the chuck or slide it a little deeper into the chuck to use the round part of the shank.

JOBBER DRILL SET 502

• Heavy duty case, with lock catch.

• 25pcs, sizes: 1-13mm, 0.5mm rises (plastic case)

• 29pc, sizes: 1/16”-1/2” (cmetal case), rises 1/64”

3 FLUTE COUNTERSINK

525

• 90° angle, 3 flute countersink.

• HSS - Cobalt for all metals.

• 6.3-40mm straight shank.

• 43-50mm are morse taper fitting.

• 1200N/mm2

HSS Hole Type Countersink

• Cone shaped, with a cutting edge provided by a hole through the side of the cone.

JOBBER DRILL DISPLAY 502

Steel drill bit display cabinet with see-through lockable front and rear doors.

Size

379mm (w) x 202mm (d) x 238mm (h)

JOBBER DRILL DISPLAY

507

Steel drill bit display cabinet with see-through lockable front and rear doors.

Size

390mm (w) x 225mm (d) x 460mm (h)

JOBBER DRILL SET 507

• 130° split point drills

• Heavy duty plastic case, with lock catch.

• 19pc, sizes: 1-10mm, 0.5mm rises

• 25pcs, sizes: 1-13mm, 0.5mm rises

• 29pc, sizes: 1/16”-1/2” (comes in metal case), rises 1/64”

• HSS - Cobalt material, for deburring holes, on all metals including stainless steel.

Sizes

4-9mm - DRACHT0409

6-13mm - DRACHT0613

8-19mm - DRACHT0819

10-24mm- DRACHT1024

12-32mm - DRACHT1232

Countersink Set 3 Flute

• 90° angle, 3 flute countersink

• HSS - Cobalt material, for deburring holes, on all metals including stainless steel.

Sizes

6.3, 8, 10, 12, 16 and 20mm

Imperial DRTIM29SET DRACOS536P

29pc Imperial DRI502S029

• 130º split point, HSS fully ground.

• Great sizing for rivets.

• Double ended.

Evolution ME42 Mag Drill

English quality magnetic drill with a 42mm cutting capacity with a powerful 1200W motor.

• Quick release height adjustment which allows drills to be used at full capabilities.

• Best seller and great all rounder.

• Big cutting diameter 42mm.

• Magnetic adhesion: 1300kg.

Lightweight: 10.9kg.

Motor: 450RPM.

• Twist drills 1-13mm.

• Size: 105W x 280L x 420H.

• Stroke: 230mm.

• Complete with carry case.

• 12 month warranty.

• Comes with chuck and chuck adapter

• HSS - Cobalt 1200N/mm2 step drill for all mild and stainless steel.

• Cut up to 30mm.

• Drill and deburrs in one pass.

• Self starting split point.

x 10mm shank DRBSTD0630

HSS Centre Drill

• Used for spotting or starting accurate centre holes.

• High strength steel (HSS), Double ended centre drill.

Sizes

No. 1 - DRCTDE0001

No. 2- DRCTDE0002

No. 3 - DRCTDE0003

No. 4- DRCTDE0004

No. 5 - DRCTDE0005

No. 6- DRCTDE0006

No. 7- DRCTDE0007

• 135° Self-centering split point.

• HSS-DIN338

• Designed to increase 13mm chuck capacity.

are only standard drill format.

Morse Taper Shank Drill

Morse shank drill with black oxide coating for better lubrication.

Sizes

Unibor Variable Speed Low Profile Mag Drill ELP50

Largest capacity low profile, variable speed magnetic drill on the market, perfect for confined spaces and everyday drilling.

• English quality.

• Designed for the engineer, for demanding environments.

• High quality castings and powerful motors.

• Motor overload protection.

• 50mm cutting diameter and 50mm cutting depth.

• 1200W motor with variable, 6 speed setting.

• 12 month warranty.

• Complete kit with carry case.

MOST POWERFUL MOTOR VARIABLE& SPEED

• 135º split point, HSS fully ground.

• Great sizing for rivets.

MADE

35mm depth Tungsten Carbide Tipped (TCT) cutters, longest lasting cutter available. Great for harden steels inc stainless steel.

• Premium TCT, will last up to 3 x longer than cobalt.

• 12-16mm cutters - use a 90x6.34mm ejector pin, 17-28mm cutters - use a 90x7.98mm ejector pins.

• Cutter saves time and energy compared with other drilling methods, drilling speeds 3 x faster than twist drills.

• Real quality, with a burr-free finish hole.

• Versatility to fit most magnetic drill brands.

With any ELITE Rotary Burr or Annular Cutter BEANIE*

Annular Cutter Ejector Pins

Sizes to suit most annular cutters (step pins for 12mm+).

• 79mm step pin for 12mm+ diameter, and 25mm cutting depth cutter.

• 102mm step pin, for 12mm+ diameter, and 50mm cutting depth cutter.

• 90x6.34mm step pin for 14-16mm cutting depth cutter.

• 90x7.98mm step pin for 17-28mm cutting depth cutter.

HSS Annular Cutter Set - 25mm Depth

• Quality HSS Annular Cutters in a protective case, great for site work, and to keep your common sizes together.

• 3pc - 3 cutters sizes: 14, 18, 22mm, and 1 step ejector pin.

• 6pc - 6 cutters sizes: 14, 16, 18, 20, 22, 24mm, and 1 step ejector pin.

on most metals.

• Cutters save time and energy compared with other drilling methods, drilling speeds upto 3 x faster than twist drills.

• No step drilling required, just real quality, with a burr-free finish hole.

• Versatility to fit most magnetic drill brands.

• Available in diameters from 10 – 65mm.

• For use with 79mm ejector pins.

25mm depth HSS Annular Cutter for use

6pc set - DRACS256PC

3pc set - DRACS25300

HSS Metric Coarse

Button Die - Open

Quality High Speed Steel (HSS) button dies for cutting new or cleaning existing threads.

Sizes: M5-M24.

HSS UNC Button

Die - Open

Quality High Speed Steel (HSS) button dies for cutting new or cleaning existing threads.

Size range: 1” Outside Ø; 3/16-1/2”

1 1/2” Outside Ø; 3/8-3/4”

2” Outside Ø; 7/16, 5/8-1”

HSS Metric Coarse

Die Nut - Solid

Made with High Speed Steel (HSS) use in conjunction with a spanner.

Sizes: M5-M24.

HSS Metric Coarse Hand Tap HSS UNC Hand Tap

General purpose hand threading on all material.

Available in Bottom, Intermediate and Taper.

Sizes: M3-M36

HSS Metric Coarse Spiral Flute Machine Tap

Coarse thread general purpose machine taps, used on all metals. Used for machine tapping which directs the chip back, ideal for blind holes.

Sizes: M4-M24

General purpose UNC thread taps used on all materials.

Available in Bottom, Intermediate and Taper.

Sizes: 3/16-1 1/2”

HSS UNF Hand Tap

HSS UNF Taps for general purpose threading on all metals.

Available in Bottom, Intermediate and Taper.

Sizes: 3/16-1 1/2”

HSS Metric Spiral Point Machine Tap HSS BSPF Hand Tap

HSS coarse thread general purpose machine taps, to be used on all metals. Used for machine tapping through open holes, with the point which helps to direct the chip ahead of the tap.

Sizes: M4-M24.

HSS UNC

Die Nut - Solid

Made with High Speed Steel (HSS) use in conjunction with a spanner.

Sizes: 3/8-7/8”.

HSS BSPF Taps for pipe threading on all metals.

Available in Bottom, Intermediate and Taper.

Sizes: 1/8-1 1/2”

HSS Metric Fine Hand Tap HSS BSPT Hand Tap

General purpose hand threading on all material .

Available in Bottom, Intermediate and Taper.

Sizes: M4-M24

BSPT taps used for pipe/taper threads. Available only in bottom tap.

Sizes: 1/8-1 1/2”

Alpha Bi-Metal - Cobalt Holesaws

Best bi-metal construction with 8% cobalt for longer life with a 4/6 variable tooth pitch for fast cutting.

• 50mm cutting depth and 5mm backing plate for long lasting use.

• Shatter-proof. 8% cobalt bi metal, available in 9 and 12pc sets.

A heavy (ISO 46), active, non-emulsifying, high additive EP cutting oil for use on ferrous metals, stainless and nickel/chrome steels.

• Mainly confined to uses where a high viscosity oil is required. Pipe threading by hand or machine.

• For use on heavy duty operations such as gear cutting, broaching, turning, threading and tapping.

Alpha Holesaw

Arbor/Pilot Drill

Extra pilot drills and small or large arbors for bi-metal holesaws.

Chemz Xtra Cutting Oil

General purpose drilling and cutting lubricant, reduces friction & wear, improves surface finish.

Size: 400ml.

11pc Dart Trade Holesaw Kit

HSS premium 8% cobalt bi-metal holesaws for professional use.

• Zipped case with foam insert to hold your bits securely.

• Suitable for cutting aluminium steel, stainless steel, brass, cast iron, wood and plastic. Long life.

Sizes: 16, 20, 25, 32, 44, 51, 64, 68, 76mm + 2 arbors

Bi-Metal Bandsaw Blades

German quality bandsaw blades with bi-metal long life cutting tips and ground finish for higher accuracy and keener edge.

• Great value for money with excellent cuts.

• Huge range of blade lengths, widths and tooth pitches to cut most material types.

• M42 bi-metal long life cutting tips with 8% cobalt content, or carbon blading.

• Ground finish for higher accuracy and keener edge.

• Spring steel backing with 4% chromium content for high flexibility and metal fatigue resistance.

Aluminium Cutting Blade Angle Grinder

Specialist aluminium 2.5mm cutting or 4mm grooving/weld prep blade.

Hacksaw Blade

SPCHXCO400

5L - OIMRMCT550

500ml - OIMRMCT505

General purpose blade for hand hacksaws. 300mm long.

Binzel

Binzel Style 15 Conical Nozzle

12mm - VMBN150012

Binzel Style 15 Contact Tip M6x6 Binzel Style 15 Tip Holder/Diffuser M6 LH

0.8mm - VMBTM66080

0.9mm - VMBTM66090

1.0mm - VMBTM66100

1.2mm - VMBTM66120

VMBHM61542

Binzel Style 24 Tip Holder M6

VMBHM62426

Binzel Style 24/25 Contact Tip M6x8

0.9mm - VMBTM68090

1.0mm - VMBTM68100

1.0mm Alu - VMBTM6810A

1.2mm - VMBTM68120

1.2mm Alu - VMBTM6812A

1.6mm - VMBTM68160

Binzel Style 24 Diffuser White Ceramic

VMBDW24000

Binzel Style 25 Tip Holder/Diffuser M6

VMBHM62535

Binzel Style 36 Tip Holder M6

VMBHM63628

Binzel Style 36

Conical Nozzle

VMBN360019

Binzel Style 501 Nozzles

14mm - VMBN501014

16mm - VMBN501016

Tweco

Binzel Style 36 Diffuser White Ceramic

VMBDW36000

Binzel Style 36 Tip Holder M8

VMBHM83628

Binzel Style 35/501

Contact Tip M8x10

0.8mm - VMBTM80080

0.9mm - VMBTM80090

1.0mm - VMBTM80100

1.0mm Alu - VMBTM8010A

1.2mm - VMBTM80120

1.2mm Alu - VMBTM8012A

1.6mm - VMBTM80160

Binzel Style 501 Tip Holder M8

VMBHM85010

Binzel Style 501 Diffuser White Ceramic

VMBDW50100

Euromarc’s Welding range includes torch parts manufactured to the same specs as the OEM for Binzel, Tweco and Tregaskiss welding torches. Plus so much more, check out the range online euromarc.co.nz/welding

CERAMIC FLAP DISC 103

FREE*

With every pack of 10 ELITE 103

Receives a pair of Clear CRAFTSMAN 510 Safety Glasses

*While stocks last.

Combi Flap Disc

Made up of a combination of abrasive cloth for removal, and softer, surface-conditioning material or blending and fine finishing.

• Reduce your time on finishing, with removal and finishing or blending in one.

• Consistent and uniform finish.

• In-experienced users find it easy to use as it removes material with more control.

• Soft and flexible, capable of following curves in difficult areas without digging in or damaging the metal like standard hard abrasives.

Suitable for stainless steel, aluminium and steel.

Surface Conditioning Flap Disc

Surface conditioning material designed to remove grinding marks, coatings or imperfections in metal. Utilising 3M TM, Scotch-Brite® Surface conditioning material.

• Leaves a burr free consistent blended finish on all surfaces.

• Non-woven open construction enables consistent cutting and no-glazing to improve finish.

Colours: Coarse/Brown, Med/Maroon, Fine/Green.

Sizes: 115 & 125mm

Ceramic Grain

Provides faster and longer lasting sanding on all metals. The ceramic cracks and exposes new cutting edges.

Extra Large Flaps

The unique extra-large flaps assist with longer lasting and more consistent sanding. As the flaps wear down the material backing of the flaps exposes the new fresh grain on the flap below.

Flat, hard, nylon backing

Transfers the pressure from the grinder directly to job and minimises the potential for dimples in the work on the metal.

Suitable for Stainless steel, aluminium, mild steel, medium-light grinding, to blending.

Grit

P40, P60, P80, P120

Polishing Felt Flap Disc

High finishing and polishing felt flap disc. Designed to make fine finishing easy.

• The felt flaps are soft and flexible and help prevent overheating. For highgloss mirror like polishing accompanied by polishing compound or paste. Suitable for alumium or stainless steel.

Scotch-Brite® Roll

150mmx10mtr

Utilising 3M TM, Scotch-Brite® Surface conditioning material. Non-woven roll for surface cleaning, buffing and scuffing.

Grey - for very fine and very light finishing.

Green - removes caked corrosion on all metals.

Maroon - general purpose, durable and fast cutting.

125mm 115mm

Green - BTR1501096 Grey - BTR150010V Maroon - BTR1501047

Surface conditioning material designed to remove grinding marks, coatings or imperfections in metal. Utilising 3M TM, Scotch-Brite® Surface conditioning material.

• Leaves a burr free consistent blended finish on all surfaces.

• Non-woven open construction enables consistent cutting and no-glazing to improve finish.

Colours: Coarse/Brown, Med/Maroon, Fine/Green.

Easy and safe Rap-lock half-twist locking system, for fast change over. Utilising 3M TM, Scotch-Brite® Surface conditioning material.

• More stability and extended performance with resin backing.

Suitable for finishing and blending, stainless steel, aluminium.

Colours: Coarse/Brown, Med/Maroon, Fine/Green

Deerfos BAM18

Sanding Disc

Premium aluminium oxide grain for high cutting, with zinc stearate coat to prevent clogging.

Suitable for steel, stainless steel, boat building, automotive.

Velcro Grits: P40 - P600

PSA Grits: P60 - P400

Scotch-Brite® Pad

150x230mm

Utilising 3M TM, Scotch-Brite® Surface conditioning material. Non-woven pad for surface cleaning, buffing and scuffing. Grey - for very fine and very light finishing. Green - removes caked corrosion on all metals. Maroon - general purpose, durable and fast cutting.

Low Profile Back-Up Pad

Foam core back-up pad with hook lining to suit all Velcro discs.

• Firm low profile foam backing pads provide a better feel and level of control with sanding.

• 5/16” thread for Hook’it sanding discs, M14 adapter available to fit to angle grinders.

Suitable for stainless steel sanding, medium foam hardness.

Deerfos SA331

Sanding Disc

Premium aluminium oxide grain with advanced open top-coat for fast cutting and minimal clogging.

Suitable for steel, stainless steel, boat building, automotive.

Velcro Grits: P40 - P2,000

PSA Grits: P60 - P400

Deerfos Bora1 Ceramic

Sanding Disc

Purple ‘Bora’ formula top open coating reduces clogging, friction and heat build up, which also maintains the sharpness of the ceramic grain.

Suitable for steel, stainless steel, boat building, automotive.

Velcro Grits: P60 - P220

PSA Grits: P80 - P220

Maroon - BTP150200F Green - BTP150200M Grey - BTP150200V

Upgraded zirconia cloth to give you greater removal power, and longer life.

• Heavy-duty fibreglass backing for extra strength, and better transfer of power.

• Improved flap density – more flaps to help give you more control, and rapid stock removal.

• European quality.

Suitable for Stainless steel, aluminium, mild steel, medium-light grinding, to blending.

Buff-Tex AP Wheel

AP5

• Designed for deburring, blending grinding marks, cleaning and satin finishing for all metals.

• Best suited to pedestal and bench grinders.

• Equivalent to HP wheel.

AP1

• Less dense than AP5 for lighter cleaning and blending.

• Great for hand held tools and applying satin finish to stainless steel and aluminium.

• Equivalent to HP4 and multi-finishing wheel.

Sizes: 150x25mm, 150x50mm, 200x50mm.

Combination Flap Wheel - Wooden Hub

A combination of high strength and heavy duty Scotch-Brite® material and aluminium oxide cloth.

• Less aggressive than the standard flap wheel.

• Provides a brushed finish rather than a grain finish.

• Manufactured with a wooden hub.

Suitable for satin finishing or blending, stainless steel and aluminium.

Colours: Heavy duty/Brown, High Straight fine/ Maroon.

Sizes: 150x50x16mm & 150x25x16mm.

Receives

Lens Cleaning Wipes

• Microfibre cleaning cloth to keep your eye protection in excellent condition.

• 100 Individual pre-moistened wipes.

• Use on safety glasses, goggles, face shields, welding lenses. Use on plastic, glass or polycarbonate lenses.

Large wipe size: 150mm x 200mm.

G-Max Premium Safety Goggles

Stylish wraparound design with 2mm lens, anti-scratch and anti-fog coating.

• Panoramic 180° field of vision.

• Ergonomic design with co-injected frame. Outstanding ventilation system.

• Medium impact rating.

• Anti-scratch / anti-fog coated lens

• Splash approval rated

Large Bifocal Lens

Safety Glasses

• 50mm diameter magnifying lens for fully magnified work area reduces eye strain.

• Increases visual precision for close work tasks in front and above user

• The only full lens magnifier built into a Ballistic rated 9 Base polycarbonate lens.

Lens clear.

Diopter

+1.0 - WSSBFC5R10

+1.5 - WSSBFC5R15

+2.0 - WSSBFC5R20

+2.5 - WSSBFC5R25

NEW ADVANCED ANTI-FOG COATING

Maximum resistance to fogging in cold/hot/ humid environments.

SAFETY GLASSES 505

Flexible self-adjusting arms. Diffuses pressure spots and provides comfortable fit every time.

SAFETY GLASSES 509

Top of the line safety glasses for any work environment, no matter how extreme.

• Soft co-molded rubber temples. Removable TPE face seal & adjustable strap included. Lenses: smoke and clear.

SAFETY GLASSES 510

Top of the line wrap-around style flexible safety glasses.

• Ergonomically designed for excellent coverage and all round vision.

• Anti-Fog coating.

Lenses: smoke and clear.

Larger, close fitting lens to the face. Provides better protection against sparks and flying debris/dust from entering the eye-zone.

Colours

Clear - WSSEEC5050

Smoke - WSSEEC5052

Amber - WSSEEC5051

SAFETY GLASSES 501

Cost effective wrap-around design.

• Very lightweight, with thin streamline temples.

• Certified to AS/NZS 1337.1:2010 medium impact.

Lenses: smoke and clear.

Esko Brow and Face Shield

Extra high impact protection resistant to chemical splash, molten metal, hot solids.

WSSBGR1000 WSSBGRDVCL

SAFETY GLASSES 509

Shade 5 IR Infared filters for gas cutting/ welding to AS/NZS 1337.1.2010.

• Soft co-molded rubber temples. Removable TPE face seal & adjustable strap included.

• Advanced anti-fog and anti-scratch.

Lens Shade 9 - WSSEEC5095

BIFOCAL SAFETY GLASSES 510

Lightweight flexible design, with a range of +1.0 - +2.5 easy to see fine details.

• 60% larger bifocal area.

• Medium impact rated. Available in +1.0 - +2.5 diopter in clear.

SAFETY GLASSES 502

Designed to be worn over prescription glasses. Lightweight, comfortable economy eye protector.

• Medium impact, anti-scratch lens.

• Unobstructed 180º viewing.

Lens: clear, smoke.

Retractable Ball Point Pens

Ideal for the workshop, work vehicle and office use.

• Soft, comfortable, non-slip grips to minimise fatigue.

• The ballpoints allow for smooth, effortless writing.

• These pens are retractable and have a pocket clip.

• 12 pens per pack.

ASTPENCM01

Water-Based Paint Marker Pens

Writes on most surfaces, permanent on porous surface, removable on glass.

• Compatible for metal marking prior to galvanizing.*

• Capped style. Non toxic, Xylene-free.

• Made in Japan.

* Some galvanizing processes differ by manufacturer, ensure the markings have been removed post aciding.

Permanent

Marker - Black

Alcohol-based ink, xylene-free, smudge-proof and waterproof so you don’t need to worry about causing smears in your work.

• Medium bullet tip and will produce lines between 1.0 and 3.0 mm.

Suitable for wood, metal, vinyl, glass, plastic and more.

Chemz Fluro

Upside-Down Can

High visibility multi spray markers. For use on most materials in construction, roading etc.

• Upside down can, 400ml

Fluro colours

Pink - SPCHFDP400

Blue - SPCHFDB400

Orange - SPCHFDO400

Red - SPCHFDR400

Yellow - SPCHFDY400

Green - SPCHFDG400

Markel Paintstick

Ideal for marking on rough surfaces and able to paint over.

• Mark on wet, oily, rusty, rough or smooth surfaces.

• Ideal for metal fabrication that will be given a coat of paint, as it will not show through primer or top coat paint.

• Marking in -18c to 60c.

Colours

Yellow - ASTPESM221

White - ASTPESM220

Premium hard engineers chalk, resist breakage or powdering.

• Premium quality.

• 144 pieces per box.

• 100 x 12 x 5mm.

15mm Wide Chisel Tip - ASTPEKW017

Medium Tip - ASTPEW20613W

Fine Tip - ASTPEW20609W

Blue - ASTPEBPB07

Black - ASTPEBPA07

ASTPEN20413A

KEVLAR RIGGER 303

Premium A-grade leather Providing better wear on all parts of the glove.

Wavy Wipe Rags

Ideal for use in the workshop, and general hygiene in the cafeteria and washrooms. Easy perforated design for convenience.

• 90 sheets.

• Blue.

Zorange Heavy Duty Hand Cleaner

No stitching on the inside of the index finger.

Ideal for heat work Grinding, polishing and hanbdling steel.

AR HED

Kevlar stitching Lasting over twice as long as riggers with standard stitching.

FREE*

With every 12 pack of CRAFTSMAN 303

Receives a 250ml bottle of Zorange Hand Cleaner

*While stocks last.

Mixed Rags Bag

Coloured mixed t-shirt material, great for general cleaning, compressed package.

• Stacks easily on shelves and takes up less space than normal bags.

• All rags are cut into generous sizes.

• White rags also available.

White Rags Bag

Premium white t-shirt rags manufactured from reclaimed white knit cotton rich t-shirt material.

• Low lint, making it ideal for situations using stains and solvents since there is no colour leaching.

• All rags are cut into generous sizes.

Multiple award winning extra heavy-duty hand cleaner containing natural orange oil, pumice and moisturisers.

• Designed for the removal of the most ingrained oils, greases, paints, inks, tar and general dirt and grime. Premium quality combining natural Ingredients with pumice and esters giving a superior performance, coupled with moisturisers and an orange fragrance to leave the hands feeling fresh and clean.

Sizes

• 4L and 10L supplied with hand pumps.

ASTHMRAG10

ASTHWRAG10

ASTHRBL090

WELDER’S HOOD 162

• Lightweight flame-resistant cotton hood for cover from dust and debris.

• Velcro opening, easy to wear. WSLCHX0100

311

Kevlar stitched for long lasting when working in high temperatures.

ELITE Skull Cap

• Sweat absorbent liner.

• Lightweight breathable cotton material, keeps you cool and protected.

Size : OSFM - Tie closure design, can be adjusted to your fit.

Unique fully EN388 4244X

• Lightweight headwear/neckwear for versitile protection for engineers all year round.

• Material: 95% cotton, 5% spandex

Size : OSFM - 50 x 25cm

stitched inside liner Longer EN407 423X4X XL - WSGBLGOWLD

comfort. FREE* Receives an ELITE Skull Cap With every pack of 12 CRAFTSMAN 311 MIG WELDERS *While stocks last

Large also available in left hand pairWSGBLWGX04

lasting and Standard size L - WSGBLGOWLD 16 Order online at euromarc.co.nz | 0800 278 600 | sales@euromarc.co.nz

Premium blue cowhide leather providing all day comfort and better wearing.