No Payments / No Interest
Until November 2024
2024
$1299
▪ Operational check over on tractor and loader (if equipped)
▪ Check operational fluids and filters
▪ Drive systems
▪ Belts and drives
▪ Hydraulic operation, hoses and cylinders
▪ Monitors and harness
▪ Oil and fluid scan
▪ AMS software and operational check
▪ Wheel bearings, steering operation
▪ Grease machine grease points
▪ Detailed estimate of all required repairs
On-Farm Inspection Available $1299**
Until Nov 2024
$519
130-POINT INSPECTION includes:
On-farm inspection of Planter within 50 km of store** Hoppers, meters and seed tubes
Opener and gauge wheel assembly
Grease machine grease points and lube chains
Detailed estimate of all required repairs
Hydraulic system
Meter drive system
If all recommended repairs are completed by Enns Brothers, you will receive:
In-season priority ser vice
Detailed wash
12 months of parts & labor warranty on all replaced components, starting on the first day of use. Includes consequential damage.
Planter Wear Parts Inspection.......... $299
Inspection includes: bearings, bushing, chains, scrapers, disks, wheels and arms
Vacuum Meter Inspection .................. $60 per meter
Disassemble, clean, inspect and test
Finger Meter Inspection ..................... $60 per meter
Disassemble, clean, inspect and test
OptimizePro Package ....................... $1549
Walk around with customer to show key ser vice points Verify correct hydraulic hookup
Explain folding and unfolding
Check planter level
In-field optimization for first crop Safety review
In-field operator training: includes manual review
Monitor setup & review: includes home page, alarms, vacuum fans, seed size
Until Nov 2024
$1599
70-POINT INSPECTION includes:
On-farm inspection of air cart and tool within 50 km of store** Air tank, lids and seals
Ser vice of metering rollers (up to 3) and housing Auger, conveyor and fan
Grease machine grease points and lube chains
Detailed estimate of all required repairs
Seeding tool, hoses and towers
If all recommended repairs are completed by Enns Brothers, you will receive:
In-season priority ser vice
Detailed wash
12 months of parts & labor warranty on all replaced components, starting on the first day of use. Includes consequential damage.
OptimizePro Package Air Cart...................(1910) $779 (C650/850) $1119
Walk around with customer to show key ser vice points
Check for updates on cart controller
In-field operator training: includes manual review
Verify correct hydraulic hookup
Setup air cart in display
In-field optimization for first crop
Systems setup & review: included hose configuration, Safety review
agitator speed, tire size and meter roller configuration
OptimizePro Package Air Drill (1830/35/P600) $1149 (1890/95) $1579 (N560F) $1699
Walk around with customer to show key ser vice points
Verify correct hydraulic hookup
Systems setup & review: included tractor hookup, hose configuration sensor setup
Monitor, hydraulic pressures, closing wheel down pressure, press wheel down pressure and tire pressures
Check & level implement
Check & adjust seeding depth
In-field operator training: includes manual review
In-field optimization for first crop
Safety review
NO PAYMENTS NO INTEREST Flexible financing options $17 MILLION
10 3% YIELD 1st week of May 10 2% YIELD 2nd week of May 2-4 bu /a cr e lo ss u p t o - $2,500 $ 89% YIELD 3rd week of May - $ 9,92 0 $ 77% YIELD 4th week of May $ - $16,000 75% YIELD 1st week of June $ -$ 22,560 10-18 bu /a cr e lo ss $ u p t o - $ 11,500
SPRAYERS
$1599 $1099
150-POINT INSPECTION includes:
▪ Operational check over on sprayer
▪ Check operational fluids and filters
▪ Drive systems
▪ Belts and drives
▪ Hydraulic operation, hoses and cylinders
▪ Wet system including nozzle flow check
▪ Monitors and harness
▪ Oil and fluid scan
▪ Detailed estimate of all required repairs
▪ Sprayers system must be free of chemical prior to inspection
▪ AMS software and operational checks
▪ Wheel drive hubs, suspension & steering operation
▪ Grease machine grease points
On-Farm Inspection Available $1299**
Until Nov 2024 $879
COMBINES X Series $2599 $1999 $1599 $1299 On-Farm Inspection Available X Series $1999** S/STS/Walker $1499**
Nov 2024
899 Until
.....................
(S Series) $959 (X Series) $1269
Ser viceGard Inspections
Straight Cut Headers $399
Hinge Draper Cut Headers
$599
Corn Headers $79 PER ROW
Inspection includes:
▪ Operational check over on header ▪ Adjust drive belts & chains
▪ Drive system
▪ Cutter bar / Row units
▪ Hydraulic operation, hoses & cylinders
▪ Grease machine grease points and lube chains
▪ Check knife drive gearbox on corn heads
▪ Detailed estimate of all required repairs
If all recommended repairs are completed by Enns Brothers, you will receive:
In-season priority ser vice
Detailed wash
12 months of parts & labor warranty on all replaced components, starting on the first day your header goes into the field Includes consequential damage.
Detailed Wash Package ..................................... $99
▪ Wash cutter bar, side sheets and under all shields
▪ Included if all recommended repairs are completed
▪ Available in store only
OptimizePro Package ............................ Basic $329 Hydraflex $469
▪ Ensure proper combine attachment: includes latch pins, multi coupler, drive shaft (if adjustment needed)
▪ Walk around with customer to show key ser vice points
▪ System setup & review: includes reel stop height, (no doc setup included)
▪ Calibrate as needed: HHS, Dial-A-Speed, Contour Master
▪ Air bag inflation check as per guidelines (if applicable)
▪ In-field operator training: includes manual review
▪ In Field optimization and final adjustments for first crop
▪ Safety review
$649
85-POINT INSPECTION includes:
▪ Operational check over on Baler
▪ Remove all forming belts, confirm length specs
▪ Inspect all rollers, bearings, side sheets and wear bars
▪ Reinstall forming belts with new pins
▪ Check all mesh wrap components and specs
▪ Hydraulic operation, hoses and cylinders
▪ Gear case oil change
▪ Grease machine grease points and lube chains
Mower Conditioner Ser viceGard Inspection
$349
60-POINT INSPECTION includes:
▪ Operational check over on MOCO
▪ Drive system
▪ Cutter bar
▪ Conditioner components
▪ Hydraulic operation, hoses and cylinders
ADD ONS
▪ Adjust drive belts
▪ Grease machine grease points
▪ Detailed estimate of all required repairs
▪ On-Farm inspection available
Detailed Wash Package ............ $149
▪ Detailed estimate of all required repairs (In-store only)
Maintenance Package MOCO ..................... $199
OptimizePro Package Baler ..............Basic $519 Auto $1209
OptimizePro Package MOCO ...................... $519 Contact us for complete details.
Round Baler Ser viceGard Inspection
Until Nov 2024
SWATHERS
Until Nov 2024
$689
WE ’ VE GO T YOU COVERED.
WARRANTY
Enns Brothers provides a one-year parts & labor warranty from the 1st use date on machines put through our ServiceGard programs, as per the following guidelines:
• Parts & labor warranty on new John Deere replacement parts installed by our technicians
• If a new part installed during the inspection fails within 1 year from 1st date of use, we will replace it at no charge
• If a failure occurs on an item not repaired but that should have reasonably been caught during the inspection:
• Enns Brothers will make the repair at the same charge as if it was found and repaired during inspection
• Customer would still be responsible for the cost of the parts & labor
• Usually this would mean no travel time or service call fee would be charged to the customer
NOTE: Enns Brothers also provides priority in-season service to customers utilizing our ServiceGard programs.
UPTIME GUARANTEE
If we cannot get an emergency breakdown repaired in 24 hours, then the customer will receive a loaner unit, with the rent for that unit covered by Enns Brothers. If it is immediately known that the repair will take more than 24 hours, the Service department is responsible for the rent of the initial 24 hours of usage and the customer will receive their loaner as soon as possible.
Conditions
• Customer must complete all repairs deemed necessary by the dealership during the ServiceGard inspection to be eligible for the Uptime Guarantee.
• Failures deemed to be caused by abuse, misuse, or lack of maintenance or adjustment will not be covered by warranty or the Uptime Guarantee.
• Repairs covered by an insurable event will not be covered by warranty or the Uptime Guarantee.
• Equipment that is tampered with (ex. chipped, deleted) will not be covered by warranty or the Uptime Guarantee.
MyDealer
ARBORG (204) 376-5946
BRANDON (204) 728-7043
MELITA (204) 522-3341
2024
MORRIS (204) 746-6777
NEEPAWA (204) 476-3413
OAK BLUFF (204) 895-0212
PORTAGE (204) 857-3451
SHOAL LAKE (204) 759-2065
STEINBACH (204) 326-1305
