Table of Contents
Cover image
Title page
Copyright
Contributors
1: Introduction to graphene-based materials and their composites
Abstract
1.1: Introduction
1.2: Graphene and graphene oxide
1.3: Preparation of graphene-containing polymeric composites
1.4: Graphene/polymer composite properties
1.5: Conclusion
References
2: Synthesis of graphene polymer composites having high filler content
Abstract
2 1: Introduction
2.2: One-dimensional fiber
2.3: Two-dimensional film
2 4: Three-dimensional foam
2.5: Conclusions
References
3: Graphene-based polymer composites for flame-retardant application
Abstract
3 1: Introduction
3.2: Flame-retardant property of graphene
3.3: Preparation of graphene-based flame retardants
3 4: Application of graphene-based flame retardants in polymer composites
3.5: Flame-retardant mechanism of graphene
3.6: Summary References
4: Structural analysis of graphene-based composites
Abstract
4.1: Introduction
4.2: Static analysis
4.3: Transient/dynamic analysis
4.4: Vibration analysis
4.5: Buckling and postbuckling analysis
4.6: Effect of environmental variables and postprocessing parameters
4 7: Conclusions and future prospects
References
5: Graphene-based polymer coatings
Abstract
5.1: Introduction
5.2: Graphite/graphene-based polymer coatings
5.3: Graphene oxide-based polymer coatings
5.4: Conclusion and future outlook
References
6: Graphene-reinforced polymeric membranes for water desalination and gas separation/barrier applications
Abstract
6.1: Introduction
6.2: 2D nanomaterials
6.3: Ionized polymers
6.4: Conclusions
References
7: Modeling and simulation of graphene-based composites
Abstract
Acknowledgments
7.1: Introduction
7.2: Characterizing techniques
7.3: Atomistic simulations to characterize the graphene-polymer nanocomposites
7.4: Conclusion and future prospects
References
8: Graphene-based polymer nanocomposites in biomedical applications
Abstract
8.1: Introduction
8.2: Fabrication of polymer-graphene nanocomposites
8.3: Properties of polymer-graphene nanocomposites
8.4: Biomedical applications of polymer-graphene nanocomposites
8 5: Future perspective
8.6: Conclusions
References
9: 3D printing of graphene polymer composites
Abstract
9.1: Introduction
9.2: 3D printing methods for graphene-based composites
9.3: Printable graphene-based polymeric nanocomposite
9.4: Applications
9.5: Conclusions and prospects
References
10: Dielectric properties of graphene polymer blends
Abstract Acknowledgments
10.1: Introduction
10.2: Materials and preparation method
10.3: Dielectric properties and AC conductivity
10.4: Enhanced dielectric properties of graphene composite films by electron beam irradiation
10 5: P-E loop/energy efficiency
10.6: Electrical breakdown strength (Eb)
10.7: Conclusion
References
11: Graphene-based polymer composite films
Abstract
Acknowledgments
11.1: Introduction
11.2: Different types of graphene-based composite membranes
11.3: Conclusion and comment
11.4: Future perspectives
References
12: Modeling and prediction of tribological properties of polyetheretherketone composite reinforced with graphene and titanium powder using artificial neural network
Abstract
12.1: Introduction
12.2: Experimental procedure
12.3: Configuration of artificial neural network
12.4: Structure of database
12.5: ANN evaluation and optimization
12.6: Results and discussion
12.7: Conclusions
References
13: Graphene polymer foams and sponges’ preparation and applications
Abstract
13.1: Introduction
13.2: Applications
13.3: Conclusion
References
14: Graphene-based polymer composites for photocatalytic applications
Abstract
14.1: Introduction
14.2: Principle of photocatalysis
14.3: Titanium dioxide semiconductors
14.4: Conjugated systems
14.5: Graphene in photocatalysis
14.6: Conclusion
References
15: Effect of graphene structure, processing method, and polyethylene type on the thermal conductivity of polyethylenegraphene nanocomposites
Abstract Acknowledgment
15 1: Introduction
15.2: Experimental
15.3: Methodology
15 4: Characterization
15.5: Results and discussion
15.6: Effect of melt blending extrusion speed
15 7: Effect of graphene loading and PE type
15.8: Effect of processing method
15.9: Effect of solution processing technique
15 10: Effect of C/O ratio and surface area of graphene
15.11: Conclusions
References
16: Functionalization of graphene composites using ionic liquids and applications
Abstract
Acknowledgment
16.1: Introduction
16.2: Functionalization of graphene composites with IL-based materials
16.3: Various applications of IL-GO composites in energy storage devices
16.4: Other applications
16.5: Conclusions
References
17: 3D printing of graphene-based composites and their applications in medicine and health care
Abstract
17.1: Introduction
17.2: Graphene-based composites
17.3: 3D printing
17.4: Applications in medicine and health care
17.5: Conclusion
References
18: Graphene/polymer composite membranes for vanadium redox flow ba ery applications
Abstract
18.1: Introduction
18.2: Functionalized GO derivatives
18.3: Properties of graphene/polymer composite membranes
18.4: Conclusion
References
19: Free vibration analysis of microplates reinforced with functionally graded graphene nanoplatelets
Abstract Acknowledgments
19.1: Introduction
19.2: Modified strain gradient formulation
19.3: Kinematic and constitutive relations
19.4: Solution procedure
19.5: Results and discussion
19.6: Conclusions
References
20: Graphene-based polymer composites in corrosion protection applications
Abstract
20 1: Introduction
20.2: Carbon-based nanofillers
20.3: GO modification
20 4: Graphene in corrosion science
20.5: Utilization of graphene and derivate in polymeric composites
20.6: Conclusion
References
21: Graphene/polymer composite application on supercapacitors
Abstract
21.1: Introduction
21.2: Graphene/conducting polymer composites as electrode materials
21.3: Comparison of graphene/conducting polymers composites
21.4: Effect of electrolyte on the performance of the graphene/polymer-based supercapacitor
21.5: Graphene/nonconducting polymer composites as binders
21.6: Conclusion and future outlook
References Index
Copyright
Woodhead Publishing is an imprint of Elsevier
The Officers’ Mess Business Centre, Royston Road, Duxford, CB22 4QH, United Kingdom 50 Hampshire Street, 5th Floor, Cambridge, MA 02139, United States The Boulevard, Langford Lane, Kidlington, OX5 1GB, United Kingdom
Copyright © 2022 Elsevier Ltd. All rights reserved.
No part of this publication may be reproduced or transmi ed in any form or by any means, electronic or mechanical, including photocopying, recording, or any information storage and retrieval system, without permission in writing from the publisher. Details on how to seek permission, further information about the Publisher’s permissions policies and our arrangements with organizations such as the Copyright Clearance Center and the Copyright Licensing Agency, can be found at our website: www.elsevier.com/permissions.
This book and the individual contributions contained in it are protected under copyright by the Publisher (other than as may be noted herein).
Notices
Knowledge and best practice in this field are constantly changing. As new research and experience broaden our understanding, changes in research methods, professional practices, or medical treatment may become necessary.
Practitioners and researchers must always rely on their own experience and knowledge in evaluating and using any information, methods, compounds, or experiments described herein. In using such information or methods they should be mindful of their own safety and the safety of others, including parties for whom they have a professional responsibility.
To the fullest extent of the law, neither the Publisher nor the authors, contributors, or editors, assume any liability for any injury and/or damage to persons or property as a ma er of products liability, negligence or otherwise, or from any use or operation of any methods, products, instructions, or ideas contained in the material herein.
Library of Congress Cataloging-in-Publication Data
A catalog record for this book is available from the Library of Congress
British Library Cataloguing-in-Publication Data
A catalogue record for this book is available from the British Library
ISBN: 978-0-12-823789-2
ISBN: 978-0-12-823790-8
For information on all Woodhead publications visit our website at h ps://www.elsevier.com/books-and-journals
Publisher: Ma hew Deans
Acquisitions Editor: Gwen Jones
Editorial Project Manager: Joshua Mearns
Production Project Manager: Kamesh Ramajogi
Cover Designer: Mark Rogers
Typeset by STRAIVE, India
Contributors
Hooman Abbasi Department of Materials Science and Engineering, Poly2 Group, Technical University of Catalonia (UPC BarcelonaTech), Terrassa, Spain
Ahmed Abdala Chemical Engineering Program, Texas A&M University at Qatar, Doha, Qatar
Raouf AliAkbari Department of Chemistry, AmirKabir University of Technology, Tehran, Iran
Marcelo Antunes Department of Materials Science and Engineering, Poly2 Group, Technical University of Catalonia (UPC BarcelonaTech), Terrassa, Spain
Mohammad Arefi Department of Solid Mechanic, Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran
Elyas Mohammad-Rezaei Bidgoli Department of Solid Mechanic, Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran
Wei Cai State Key Laboratory of Fire Science, University of Science and Technology of China, Hefei, Anhui, PR China
Suphita Chaipo Division of Physical Science, Faculty of Science, Prince of Songkla University (PSU), Hat Yai, Songkhla, Thailand
A.U. Chaudhry
Qatar Environment & Energy Research Institute, Hamad Bin Khalifa University, Ar-Rayyan Chemical Engineering Program, Texas A&M University at Qatar, Doha, Qatar
Ali Dehghani
Department of Chemical Engineering, Faculty of Engineering, Golestan University, Aliabad Katoul
Department of Surface Coatings and Corrosion, Institute for Color Science and Technology, Tehran, Iran
Niloofar Eslahi Department of Textile Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
Asmara Fazal Centre of Excellence in Solid State Physics, University of the Punjab, Quaid-e-Azam Campus, Lahore, Pakistan
Wenwen Guo State Key Laboratory of Fire Science, University of Science and Technology of China, Hefei, Anhui, PR China
Andri Hardiansyah Research Center for Physics Indonesian Institute for Science, Tangerang Selatan, Banten, Indonesia
Christian Harito Industrial Engineering Department, Faculty of Engineering, Bina Nusantara University, Jakarta, Indonesia
Dineshkumar Harursampath Department of Aerospace Engineering, Indian Institute of Science (IISc), Bangalore, India
Yuan Hu State Key Laboratory of Fire Science, University of Science and Technology of China, Hefei, Anhui, PR China
Muhammad Javaid Iqbal Centre of Excellence in Solid State Physics, University of the Punjab, Quaid-e-Azam Campus, Lahore, Pakistan
Muhammad Zahir Iqbal Nanotechnology Research Laboratory, Faculty of Engineering Sciences, GIK Institute of Engineering Sciences and Technology, Khyber Pakhtunkhwa, Pakistan
Naman Jain Department of Mechanical Engineering, Meerut Institute of Engineering and Technology, Meerut, India
Kunthisa Jehlaeh Division of Physical Science, Faculty of Science, Prince of Songkla University (PSU), Hat Yai, Songkhla, Thailand
Tifeng Jiao Hebei Key Laboratory of Applied Chemistry, School of Environmental and Chemical Engineering, Yanshan University, Qinhuangdao, People’s Republic of China
Athul Joseph Department of Aerospace Engineering, Indian Institute of Science (IISc), Bangalore, India
Munawar Khalil Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Indonesia, Kampus Baru UI, Depok, Jawa Barat, Indonesia
Saeideh Kholghi Eshkalak Department of Chemistry, Amirkabir University of Technology, Tehran, Iran
Morvarid Koohkhezri Department of Materials Science and Engineering, Sharif University of Technology,Tehran, Iran
Elaheh Kowsari Department of Chemistry, Amirkabir University of Technology, Tehran, Iran
Seyed Mohammad Lashgari Department of Surface Coatings and Corrosion, Institute for Color Science and Technology, Tehran, Iran
Na Li Hebei Key Laboratory of Applied Chemistry, School of Environmental and Chemical Engineering, Yanshan University, Qinhuangdao, People’s Republic of China
Roya Lotfi
Institute for Nanoscience and Nanotechnology, Sharif University of Technology, Tehran, Iran
Department of Health Technology, Technical University of Denmark, Copenhagen, Denmark
Abdelnasser Mabrouk Qatar Environment & Energy Research Institute, Hamad Bin Khalifa University, Ar-Rayyan, Qatar
Vinyas Mahesh Department of Mechanical Engineering, National Institute of Technology, Silchar, Assam, India
Vishwas Mahesh
Department of Aerospace Engineering, Indian Institute of Science (IISc), Bangalore
Department of Industrial Engineering and Production, Siddaganga Institute of Technology, Tumkur, India
Mozhdeh Mazaheri Department of Materials Science and Engineering, Sharif University of Technology, Tehran, Iran
Hesam Moghadasi School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran
Department of Mechanical Engineering, Technical University of Denmark, Copenhagen, Denmark
S. Mohanty CIPET: SARP-LARPM, Bhubaneswar, Odisha, India
Mohammad Dashti Najafi Department of Chemistry, AmirKabir University of Technology, Tehran, Iran
S.K. Nayak Central Institute of Plastics Engineering and Technology, Chennai, India
Thien-Phap Nguyen Philippe Le Rendu-Institut des Matériaux
Jean Rouxel, University of Nantes, Nantes, France
Avinash Parashar Department of Mechanical and Industrial Engineering, Indian Institute of Technology, Roorkee, India
Ardian Agus Permana Division of Physical Science, Faculty of Science, Prince of Songkla University (PSU), Hat Yai, Songkhla, Thailand
Budi Riza Putra Department of Chemistry, Faculty of Mathematics and Natural Sciences, Indonesia Defense University, Kawasan IPSC Sentul, Bogor, Jawa Barat, Indonesia
Chatchai Putson Division of Physical Science, Faculty of Science, Prince of Songkla University (PSU), Hat Yai, Songkhla, Thailand
Penghua Qian State Key Laboratory of Separation Membranes and Membrane Processes, School of Textile Science and Engineering and School of Material Science and Engineering, Tiangong University, Tianjin, China
Seeram Ramakrishna Department of Mechanical Engineering, Center for Nanofibers and Nanotechnology, National University of Singapore, Singapore, Singapore
Bahram Ramezanzadeh Department of Surface Coatings and Corrosion, Institute for Color Science and Technology, Tehran, Iran
Ahamad Salea Division of Physical Science, Faculty of Science, Prince of Songkla University (PSU), Hat Yai, Songkhla, Thailand
Sushanta K. Sethi Department of Polymer and Process Engineering, Indian Institute of Technology Roorkee, Roorkee, India
Haifeng Shi State Key Laboratory of Separation Membranes and Membrane Processes, School of Textile Science and Engineering and School of Material Science and Engineering, Tiangong University, Tianjin, China
Abdolreza Simchi
Institute for Nanoscience and Nanotechnology Department of Materials Science and Engineering, Sharif University of Technology, Tehran, Iran
Foad Soleimani Department of Materials Science and Engineering, Sharif University of Technology, Tehran, Iran
Mohammad Ebrahim Haji Naghi Tehrani Department of Surface Coatings and Corrosion, Institute for Color Science and Technology
School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran
Adri C.T. van Duin Department of Mechanical Engineering, The Pennsylvania State University, University Park, PA, United States
José Ignacio Velasco Department of Materials Science and Engineering, Poly2 Group, Technical University of Catalonia (UPC BarcelonaTech), Terrassa, Spain
Akarsh Verma
Department of Mechanical Engineering, The Pennsylvania State University, University Park, PA, United States
Department of Mechanical Engineering, University of Petroleum and Energy Studies, Dehradun
Department of Mechanical and Industrial Engineering, Indian Institute of Technology, Roorkee, India
Shatakshi Verma Central Institute of Plastics Engineering and Technology, Chennai, India
Haixia Wang State Key Laboratory of Separation Membranes and Membrane Processes, School of Textile Science and Engineering and School of Material Science and Engineering, Tiangong University, Tianjin, China
Ran Wang Hebei Key Laboratory of Applied Chemistry, School of Environmental and Chemical Engineering, Yanshan University, Qinhuangdao, People’s Republic of China
Xin Wang State Key Laboratory of Fire Science, University of Science and Technology of China, Hefei, Anhui, PR China
Brian Yuliarto
Advanced Functional Materials (AFM) Laboratory, Engineering
Physics
Research Center for Nanosciences and Nanotechnology (RCNN), Institut Teknologi Bandung, Bandung, Indonesia
Syed Z.J. Zaidi Institute of Chemical Engineering and Technology, University of the Punjab, Lahore, Pakistan
Mohamed Zakaulla H.K.B.K College of Engineering, Visvesvaraya Technological University, Bangalore, India
Nooshin Zandi Department of Materials Science and Engineering, Sharif University of Technology, Tehran, Iran
Lei Zhang State Key Laboratory of Separation Membranes and Membrane Processes, School of Textile Science and Engineering and School of Material Science and Engineering, Tiangong University, Tianjin, China
Lexin Zhang Hebei Key Laboratory of Applied Chemistry, School of Environmental and Chemical Engineering, Yanshan University, Qinhuangdao, People’s Republic of China
Jingxin Zhou Hebei Key Laboratory of Applied Chemistry, School of Environmental and Chemical Engineering, Yanshan University, Qinhuangdao, People’s Republic of China
