Cnc wood lathe machine catalog for oak porch chair spindles

1

CNC Wood Lathe EA-TL1530ST3

www.eaglecnctec.com



Specification



Machine size 300mm(dia)x1500mm (L)



One rotary, two knives, with gymbal & spindle



3.5kw air cooling spindle, ER25, 0-18000RPM



Rotary turning motor: AC servo motor, 0-3000RPM



Machining capacity: turn-milling, broaching, relief carving on column



CNC lathe controller: Richauto DSP A132 (3 aixs), can read AutoCAD (*.dxf) file directly



Communication code: DXF, G-code



Axis motion driving motor: stepper 450B model



Stepper Driver: YAKO2811MA



Air pressure requirement: 0.6 ~ 0.8MPa



Power supply: AC380V/50Hz, 3Ph 4 Wires



Net weight 1500KGS



Packing dimension: 3150x1220x1680mm (approx. 6.46CBM)

2

Offer 

Unit Price: Please contact



Minimum order quantity: 1 set



Package: machine is tightly wrapped with plastic film, and packed in strong plywood case which is fit for long time sea shipment.



Payment Term: 40% deposit, balance by T/T before delivery.



Warranty: 12 months since shipping date.



Delivery Time: within 15 business days on receipt of down payment.



Offer Validity: the offer is only valid before Jun.20, 2018.



Note: the quotation is as per the detailed specification listed above seriously.

3

Good design – servo instead asynchronous motor

Servo motor

3 phase asynchronous motor

Compared with 3 phase asynchronous motor, servo motor performs more stable during relief carving, it completely overcomes the problem of losing step which often occurs in 3 phase asynchronous motor. FYI, of course, if you no need to do relief carving at all, then you can take with 3 phase asynchronous motor.

www.eaglecnctec.com

4

One rotary, Two Cutters Design

One rotary design

Two Cutters Design Design of two pieces tools, one for roughing and the other for finishing, both roughing and finishing machining at same time, which increases the production out by one time.

www.eaglecnctec.com

5

With gymbal & electric spindle Gymbal The universal gymbal allows the electric spindle motor to work in two ways: vertically or horizontally.

Electric spindle With this spindle, the lathe can do broaching jobs, and embossment carving on pillars.

3.5kw, air cooled, ER25 collet, 0~18000RPM, can hold 16mm diameter cutters maximum. www.eaglecnctec.com

6

www.eaglecnctec.com

7

Some details

Cutter & cutter rest

Anti-dust design on X axis

Pneumatic clamping device

Cutter rest is for holding the cutters.

To prevent the wood chips dropping on transmission parts of x axis, so to prolong the lathe service time.

For holding the wood piece

www.eaglecnctec.com

8

Electronic details

Richauto DSP lathe controller

Stepper motor on X Y Z

Lubricator & oil water separator

3 axis control, user-friendly, not hard to learn even for beginners

Nema34, 450B model 116mm motor length 1.8° step angle 8.5N.m

A central lubrication system is for three axis linear bearing lubricating and to keep the bearings working well in long term.

Oil water separator is for connecting the air pump.

www.eaglecnctec.com

9

Main Electrics

Electronic cabinet

YAKO 2811 driver

Fuling inverter

Independent control cabinet, this is the inside view.

It allows the lathe have big torque and faser speed.

Two pieces, one for electric spindle (3.7kw), the other for rotary turning motor control(5.5kw).

www.eaglecnctec.com

10

Maintenance & After-sale service Installation:

As users, please do not worry about this. All the installation is finished in our factory before delivery. You can use the machine immediately after give it power.

After-sale service:

12 months warranty period (not include wearing parts) since the shipping date (shipment should be arranged in 30 days since the day machine ready for shipment); and technical support for lifetime. The damaged parts within warranty enjoy the free replace service if the users can send back the damage ones. User afford the post fees of sending damage one back and we afford the post fees of sending new one out. After 12 months warranty, replacing bad parts will be charged on basis of cost but no profit.

We provides online technical support, it can be by phone, email or skype; machine tutorials in English language will be provided with machine.

We can provide training for your new cnc machine in our factory in China. This is a 3 day class that will teach you everything you need to bring your machine into production. As an option, we can send a engineer to your site to conduct control training and bring the machine into production; all cost should be afforded by your party (include air tickets, visa, room and food during stay in your country), and USD200/DAY as allowance for engineer.

Limit Terms:

Damage caused by abuse, or neglect is not included in the warranty. Acts of God, fire and etc. are excluded.

The easily damaged parts such as cutters, belts and etc will not enjoy the warranty. You are advised to order some easily damaged parts for maintenance purpose in future. www.eaglecnctec.com

11

Thanks for your reading!

Please feel free to contact us.

Jackie (Oversea Market Dept.)

CNC Router, CNC Wood Lathe, Router Bits, Spare, CNC Plasma Cutter, 3D Scanner, Laser Marking Machine, UV Flatbed Printer & Oscillating Knife Jinan EagleTec CNC Machinery Co.,Ltd. www.eaglecnctec.com

sales@eaglecnctec.com

eaglecnctec@gmail.com

Office: +86-531-82956850 Fax: +86-531-82956850 Mobile Wechat &WhatsApp: +86-13065026945

www.eaglecnctec.com