THE "STANDARD" WORK ON CUTTING
186
Seams are placed below The opening is from 4 to of the side gore
from 4
O
and P. 11, which
is
lOyl inches deep.
A
facing
is
added
to the front
to 11, 1^4 inch wide.
towards Q is 5 inches. towards R is 12 inches. Connect Q and R. J Fold the line I J backward directly over the line Q R. This gives the line of the under fold from 12 to 13, and establishes Q directly under I, and R directly under J. The shaded part now lies all forward of the line I J. Cut across the fold as from 8 to I and open out the I
fold.
Q
to 14
From S
to T,
T
to
is
^
hip,
14 to S
S
U is
is
3^
inches.
same as C
the
to F.
Square backward from
and R towards U are each same as K to L.
to 15
the
^
S.
hip, Sys inches.
Finish as represented.
This forms one
leg, or
The Apron. —The
one-half of the skirt.
The
line
KL
sews on to the
represented by the upper shaded diagram.
line
T
U.
by the This is laid on a fold of the material from front gore from D to G, M, 3 and back to D. D to G. The right side is sewed in with the front gore from 11 to M, and the buttons are placed as represented. On the left side of the apron buttonholes are worked to match the apron
When the lady When dismounted
is
mounted the
side of the
buttons.
is
side.
the left side of the apron
left
is
apron
is
buttoned
It is cut
buttoned over to the right
down on
the
left side
of the
which are placed in position corresponding with those on the other side. narrower front gore and apron are desired, the seam from 3 to may be placed as much forward of its position on the diagram as required. skirt over buttons If a
M