.
UTILITY
Draw curved
20.
line
AND DECORATIVE
ART.
235
N, from point 12 through point
15, to
point 9; as
illus-
trated in the cut.
Locate point 16, on line A, ^3 of the distance between points i and 2, from 21. point 2 toward point i Draw curved line O, from point 13, through points 16 and 14, to point 9 22. as illustrated in the cut. ;
—
N. B. This draft can, also, be eliminated by tracing its parts and using the patterns or otherwise, by the thoughtful student, can, by applying the same principles separately to each part, be drafted in each part directly upon the goods; by the same construction lines being used, to each part. ;
The
Collar.
PLATE XIX.-FIGURE
LXII.
^
inch from the right-hand Locate point i, on the paper or material, ^ inch from the front edge, toward the opposite edge, 2. Draw and indicate line A, at right angles with the front edge, from point I toward the opposite edge, to of the desired circumference-depth of the collar; at which point, locate point 2. Draw line B, at right angles with line A, from point i toward the top, to 3. the desired full-depth or width of the collar, at the back; at which point, locate point 3. Locate point 4, on line B, the desired distance from point i, at which you 4. wish the crease-line of the collar. Indicate line C, at right angles with line A, from point 2 toward the top, to 5. at which point, locate the desired full-depth or width of the collar, at the front 1.
edge, and
^
;
point 5; as illustrated in the cut. 6. Locate point 6, on line C, the distance of j4 of the neck-circumference from point 2, toward point 5. Locate point 7, on line A, the distance of yi of the neck-circumference from 7. point I toward point 2. Draw curved line D, from point 7 to point 6; as illustrated in the cut. 8. Indicate line E, at right angles with line C, to the distance of j4 inch from 9. point 5 toward line B; at which point, locate point 8; as illustrated in the cut. Indicate pointed line F, from point 3 to point 8; as illustrated in the cut. 10. Draw curved line G, from point 3 to point 8, so that its extreme depth of 11. curve, at the centre, will be over a point inch below line F; as illustrated in the ;
—
^
cut.
Draw line H, from point 8 to point 6. Indicate line I, at right angles with line B, from point 4 to the point of intersection of lines I and D. 12.
13.
—All kinds and
Q. E. D.
styles of collars may be drafted to measure, from these construction lines and principles; and shaped at will, and in accordance with the demand of fashion. take the crease-line as a basis, passing at the corner of the shoulder-seam, and reaching the lapel-seam higher or lower, in the proportionate
N. B.
We
degree that the coat
is
buttoned higher or lower.