EVAPORATING OILS

TADAL DE 520

Evaporable Oil with solvent and ester additives, which provide good lubrication for ferrous and non-ferrous metals in operations of medium severity. Fast evaporation and drying High performance for sheet metal stamping No need to degrease Cleaning of parts and tools.

TADAL DE 1925/10

Evaporable oil for aluminium fin cut and copper tube drawing which has been specially designed for the air conditioning industry.

TADAL DE 615

Evaporable oil for aluminium deep drawing and copper tube drawing, which has been specially designed for aluminium blades embossing for heat interchangers, having any collar and geometry. Easy to remove Excellent finishing Easy to apply by immersion or vaporization.

TADAL DE 928

Iso paraffinic hydrocarbon and biodegradable organic esters based evaporable Coolant / lubricant / cutting oil for light alloys shaping aluminium and its alloys. An odour free fluid specially formulated for cutting, punching, drawing, shaping of thin metallic sheet Provides a thin wet protective film, which evaporates in several hours, leaving an ultrathin dry film facilitating subsequent welding process No fumes or oil mist The parts cut with this lubricant are fully dried once the oil has evaporated Excellent performance at low temperatures, guaranteeing the compatibility with a large range of cooling fluids.

TADAL DE 156/10

Highly fluid oil, for forming and cutting and annealing light alloys such as brass, copper and aluminium in thin sheets. Easy removal with alkaline detergents or solvents at low concentrations Fine film Excellent finishes.

TADAL DE 1490

Forming fluid for light alloys, (Aluminium and Aluminium alloys) Formulated using VOC free hydrocarbons, employs micro film technology. Evaporable Fine film VOC´s free Excellent finish.