STAINLESS TEEL

TADAL DE CL 80 TADALNOX, TADALNOX 2

Water miscible paste used for the forming of stainless steels, alloyed and carbon steels, which are subjected to strong thickness reduction. Can be applied neat or diluted in water. Provides excellent protection of dies and punches against wear. It is a versatile product, the dilution ratio of which can be adjusted in accordance with the drawing severity. Easily removed by means of a conventional cleaning system Extraordinary film resistance. It allows to carry out severe drawing operations Can be used on bronze elements of dies and punches.

TADALSOL ST 4

Water miscible forming oil, which can be used neat or dissolved in water at different dilution ratios according to the severity of deep drawing. It can be used with stainless steel and steel alloys. Easy to rinse with alkaline detergent High load resistance Easy to apply Excellent lubricity.

High additive content forming oil for the forming of ferrous and aluminium metals. Due to its high chlorine additive content, it is advised to process with degreasing after forming.

Extreme pressure additives Anti - wear additives Corrosion inhibitors Excellent cooling capacity High load capacity High sheer stress.

TADAL DE 161

Partly synthetic lubricant used for drawing, deep drawing and diecutting of all kind of steels, including stainless steel. Gives excellent results when used in progressive die with a slight impregnation of the belt thus minimizing consumption rates. Can be applied by dripping, recirculation, impregnation with rollers or felt. Excellent results in operation such as deep drawing Excellent performance with progressive dies Excellent performance with any type of steel including stainless steel Excellent anti -wear properties Provides excellent anti - corrosion performance Easily removed by means of solvents and alkaline detergents Odour free.