3 minute read
STEEL AND STEEL ALLLOYS
from TADALFORM
STAMPING, STAMPING, DEEP DRAWING DEEP DRAWING
STEEL AND STEEL ALLOYS
Advertisement
TADAL DE 8090 SE, 1080
High additive content oil designed for forming carbon steel and alloys. Easy application by immersion, roll or spray Quick removal with alkaline degreaser or solvent High performance and excellent finishing Suitable for medium and high deep drawing in carbon steels.
TADALFORM 90110
Special ester and hydrogenated hydrocarbon, based lubricant specifically designed for cold stamping of ferrous and non-ferrous metals. Contains state of the art, extreme pressure and anti-wear additives Provides excellent lubricity Excellent finish on the stamped parts.
OILFORM 21, 40, 71
Oil with a high additive content used for forming carbon steel and carbon steel alloys. Chlorine free Excelent exteme pressure Outstanding cooling capacity Excelent lubricity Easy degreasing using alkaline based degreaser.
TADALFORM 702-461-A
High performance synthetic oil, designed for cold forming of ferrous and non-ferrous metals. Excellent thermal stability Chlorine free Contains extreme pressure additives Extends tool and die life Can be applied via micro spray.
TADAL DE 122 ORD
Forming oil, used for drawing and cutting steel and alloys and copper, can be used neat or as an emulsion. Provides great corrosion protection on finished parts Prevents varnishing and resin residues facilitates easy degreasing.
TADAL DE 123 S
Water miscible metal forming fluid, designed for use in metal forming, drawing, bending, stretching and punching. High extreme additive content Provides high anti wear protection for dies and punches Excellent anti corrosion properties.
TADALFORM W 1 (EMULSION)
Water miscible emulsion of synthetic lubricants used for metal forming and cutting of steels, designed for cutting, drawing and punching of steel wheels. Easily cleaned using alkaline cleaners Ready to use, also dilution ratio adjustable.
TADAL CU 103
Chlorine free water miscible lubricant paste formulated for deep drawing, drawing and general metal forming of ferrous metals and copper alloys. Allows easy end of process cleaning Can be used with dilution rate form 5 - 50% Contains anticorrosion inhibitors Free of inert solids.
TADAL DE CU 10
Is a synthetic forming fluid, for metal drawing, deep drawing, stamping, punching and wire drawing of ferrous, copper and aluminum alloys. Provides a tenacious, fluid lubricating film that allows for severe forming processes Sulfur, phosphorus and chlorine free Environmentally friendly synthetic product Optimal anti-wear protection of tooling, whether steel, metallic carbides or diamond Excellent high load protection Easy application The residual film on the parts does not polymerize Easy removal with solvents or alkaline detergents.
TADAL DE 120
Forming oil for severe forming of steel. Long punch and matrix life due to its extremely high strength lubricant film and anti-wear capacity Excellent surface tension properties Excellent thermal stability High content in natural products Washable with water.
TADAL DE 80 BP, DE 100 BP
Forming oil used for cold forming. Excellent lubricity. High fluidity Excellent cooling property Easy to be removed by alkaline degreasing Long punch and matrix life due to its high film resistance and anti-wear capacity Excellent surface tension properties Excellent thermal stability Chorine free High extreme pressure performance High content in natural products.
TADALFORM 35
Cutting oil specifically for severe machining operations. It should not be used with light alloys, copper, etc. Vey low viscosity enabling quick and effective removal High extreme pressure additive content Chlorine free.
TADALFORM 26 NA
Specific synthetic oil for micro-spray application in drilling and tapping and reaming operations.
High extreme pressure additive content Contains non - active Sulphur additives Chlorine free.
TADALFORM 40 NA
High-performance synthetic oil provides excellent lubricity and cooling. It contains non active sulphured additives Suitable for drilling and threading Micro-pulverization operations Easy Degreasing High extreme pressure Chlorine free Chloride and mineral oils free Excellent lubrication and cooling power High performance.
