SINTERING NEAT OILS FOR CALIBRATION

SINTERING

NEAT OILS FOR CALIBRATION

TADALCLIP 3

Fluid specifically designed for calibrating sintered parts. Extreme pressure / Anti wear additives provides excellent lubrication of the part-die contact Protects parts against corrosion for short periods of time Compatible with high temp steam treatment of calibrated parts its additives do not hydrolyze at these temperatures and are not corrosive to materials Easily removed with chlorinated solvents or alkaline detergents and in case of being absorbed in the piece it is compatible with any lubricant which is subsequently used on the sintered material.

TADALCLIP 6

Fluid specifically designed for calibrating steel and aluminum sintered parts. Extreme pressure / Anti wear additives provides excellent lubrication of the part-die contact Protects parts against corrosion for short periods of time Compatible with high temp steam treatment of calibrated parts its additives do not hydrolyze at these temperatures and are not corrosive to materials Easily removed with chlorinated solvents or alkaline detergents and in case of being absorbed in the piece it is compatible with any lubricant which is subsequently used on the sintered material Uses the latest generation hydrocracked bases providing highly resistant film and low residue. Easily cleaned.

TADALCLIP 8

Specific lubricant for calibrating sintered parts. Compatible with impregnation lubricants used for pre lubricated sintered bearings. It´s is partially volatile and free of chlorinated, Sulphur and phosphorous additives. Easily degreased with alkaline detergents or solvents offers excellent corrosion protection. Provides very low friction coefficients, thus reducing the forces and voltages during calibration Compatible with metals and alloys that contain copper effectively protects against tool wear Applied by dipping or spraying.

TADALCLIP 99

Lubricant specifically for calibrating sintered pieces, compatible with impregnation lubricants used for pre lubricated sintered bearings, it is partially volatile free of VOCs, free of chlorine, sulphur and phosphorous.

TADALBRAT 77

Lubricating oil for calibrating sintered metal parts of low and medium density. High strength lubricant film Excellent protection against corrosion Compatibility with high temperature steam treatments Non - corrosive to copper and its alloys and easy degreasing Chlorine free.

TADAL DE CU 10

Is a synthetic forming fluid, for metal drawing, deep drawing, stamping, punching and wire drawing of ferrous, copper and aluminum alloys. Provides a tenacious, fluid lubricating film that allows for severe forming processes

Sulfur, phosphorus and chlorine free Environmentally friendly synthetic product Optimal anti-wear protection of tooling, whether steel, metallic carbides or diamond Excellent high load protection Easy application The residual film on the parts does not polymerize Easy removal with solvents or alkaline detergents.