SEMI-SYNTHETIC OILS

TADALSOL 133 TADALSOL 135 TADALSOL 245 TADALSOL 248 TADALSOL SS – 1150

TADALSOL 133

Semi-synthetic cooling lubricant suitable for machining nonferrous materials. It contains additives for the passivation of copper and its alloys, delaying or suppressing the darkening of these materials. It is also suitable for machining steels. Easily emulsifies with water, forming highly stable micro-emulsions. Using deionized water, emulsions can last for more than 2 years when used in centralized tanks that have efficient systems for filtering chips and removing supernatant polluting oils. The product provides very a high level of detergency, which results in an improvement in the machining conditions of some materials such as aluminum. To prepare the emulsions, we recommend using water with a very low hardness (less than 100 ppm of CaCO3) and a chloride content of less than 250 ppm. In some machines, the combination of factors such as the agitation, aeration and temperature of the emulsion, combined with the high detergency of the product, can give rise to foaming., the foam usually disappears spontaneously after a few hours of work, this can be overcome with the use a defoamer when preparing a new emulsion. Consult with our Technical Service for more details on this matter. The product contains a non-phenolic biocide with very low toxicity that ensures the biological stability of the emulsions as long as they are kept clean of sludge (by means of a suitable filtration system), and of polluting oils. The product is free of phenols, chromates, nitrites, heavy metals, chlorinated additives and derivatives of PTBB acid.

TADALSOL 135

Semi-synthetic oil for machining, grinding and drawing of steels, aluminum and copper and their alloys. TADALSOL 135 is a latest generation state of the art, semi-synthetic coolant / cutting oil suitable for machining, grinding, drilling, tapping of carbon steels, alloy steels and light alloys of aluminum, aluminum and copper and its alloys. It is easy to emulsify, easily forming highly stable microemulsions. It is ideal for work in centralized systems when excellent anti-bacterial and algae properties are needed. Capable of achieving a sump life of more than two years. To prepare emulsions or solutions, you should always add the coolant to the water. The TADALSOL 135 can work from water hardness up to 40º HF (400 ppm CaCO3). TADALSOL 135 contains new generation biocides against microorganisms.

Multi-metal use High performance with general machining of aluminum and its alloys High detergent properties Strong emulsion stability Decrease waste disposal costs.

TADALSOL 245

Boron free high-performance cutting fluid for machining, is a semi-synthetic fluid, soluble in water, formulated using mineral oil and latest generation emulsifiers with anticorrosive, antioxidant and polar lubricant and boundary additives. Boron, chlorine, active sulphur, heavy metals, phenols, and nitrites free.

Excellent surface finish Long, cost efficient sump life Decrease waste disposal costs Low level of foaming (even in high pressure applications) Exceptional anticorrosive properties Optimum life of the cutting tool.

TADALSOL 248

High-performance cutting fluid for machining and grinding. A semi-synthetic fluid, soluble in water, formulated with mineral oil and latest generation emulsifiers with polar, anticorrosive, antioxidant and lubricant additives.

TADALSOL 248 is free of boron, chlorine, active sulphur, heavy metals, phenols, and nitrites. Used for grinding and severe machining operations on a broad range of metals including steel, cast iron, yellows metals, aluminum and its alloys.

Excellent surface finish Long and predictable sump life Low level of foams (even in high pressure applications) Excellent anticorrosive properties Extended cutting tool life.

TADALSOL SS – 1150

Fluid concentrate for cutting and grinding, a semi-synthetic concentrate designed as a multi-metal coolant for machining ferrous and non-ferrous materials. Has excellent wetting and cooling characteristics of a high quality synthetic fluid that achieves superior results in machining and grinding. Performance permits the lubrication for most difficult machining operations in machining Centre’s. It is also designed for the calibration of sintered parts. Very versatile product that works well in a wide range of operations both grinding and machining.

Excellent in machining and grinding of steels and cast iron Extremely fine emulsion minimizes carryover losses with parts and chip Quick wetting to reach the cutting point and full protection of parts Superior corrosion prevention Tolerates hard water very well Easily recyclable or disposable without the need for special handling or equipment Contains no secondary amines, chlorine, nitrites or phenolic compounds.