NEAT OILS

TADAL CT 2 TADAL CT 4 TADAL CT 11 TADAL CT 12 TADAL CT 14 TADAL CT 15 TADAL CT 20 TADAL CT GRIND 8 PO TADAL BIOCUT 15 TADAL BIOCUT TADAL BIOCUT VP TADAL BIOCUT 32

TADAL CT 11

Neat oil for machining and grinding aluminum and aluminum magnesium alloys Ideal for working with aluminum alloys, aluminum-magnesium.

Chlorine free Excellent cooling properties Excellent finish on machined parts.

TADAL CT 12

Neat cutting oil for machining, deep drilling operations. high synthetic hydrocarbon fatty esters and sulphochlorinated additive content. Ideal for grinding and difficult machining.

Low viscosity designed to maximize cooling extreme pressure additives Excellent lubricity Provides excellent finish.

TADAL CT 2

Neat cutting oil suitable for general machining of steels copper alloys and aluminum alloys. Formulated with carefully selected paraffinic base oils and additives, it has good skin and material compatibility.

Excellent cooling properties Excellent anti-wear properties Exceptional tool life Provides excellent finish.

TADAL CT 4

Neat mineral cutting oil for difficult operations on steels, used for gear hobbing, broaching and threading. on medium and hardened steels including stainless steel.

Exceptional anti-wear properties Optimal result in gear hobbing operations Optimal results in broaching operations Excellent finish in difficult operations.

TADAL BIOCUT 15 TADAL CT 14

Neat cutting oil for machining, deep drilling operations, used for machining carbon steels, alloys, when low viscosities are required with extreme pressure / lubricity greasiness. Ideal for grinding and difficult machining.

Low viscosity High synthetic hydrocarbon fatty esters and sulphochlorinated additive content Excellent cooling properties Provides excellent finish.

TADAL CT 15

Chlorine free transparent neat cutting oil, formulated for machining multi materials ferric, copper and aluminum alloys.

Excellent for critical operations such as deep drilling and reaming The product is formulated with solvent-refined paraffinic base oils provides excellent cooling Excellent film resistance minimum coefficient of friction Very operator friendly.

TADAL CT 20

Neat lubricant-coolant oil, suitable for the general machining of steel, copper alloys and aluminium alloys.

Excellent cooling properties Exceptional anti-wear capacity Provides excellent cutting results Excellent chip / swarf removal gives exceptional tool service life High quality finish.

TADAL CT GRIND 8 PO

Neat synthetic oil All types of grinding, especially hard metals, where it is essential to avoid the dissolution of cobalt. Low viscosity offers exceptional cooling properties, allowing it to work at high speeds with high performance.

Very low viscosity. Low tendency of misting and low evaporation Free of chlorine, zinc and their derivatives Excellent high temperature stability Exceptional anti-oxidation properties Compatible with base oils, fatty esters Made up of PAO oil.

Neat multi-metal cutting oil, formulated using components approved for the use in food industry. TADAL BIOCUT 15 is a cutting oil for the machining of steels, aluminum and copper alloys. chlorine, barium and zinc free. Contains additives that allow machining of copper alloys without staining or corrosion. Provides excellent finishes and cutting performance on bar turning steels.

Extended tool life Improve surface finishes Excellent filterability Environmentally friendly. Operator friendly Easy to recycle the oil as it is easily recoverable from the shavings by centrifugation Easy to remove from the surface with alkaline detergents or solvent.

TADAL BIOCUT 32

Neat cutting oil for machining, TADAL BIOCUT 32 is a neat cutting oil that can also be used as oil lubricant or hydraulic fluid. TADAL BIOCUT 32 contains special additives that provides:

Excellent finish and cutting performance for turning steel bars Lubricate the various head mechanisms of machine tools as long as these require the viscosity of 32 cst or SAE 10W Act as hydraulic fluid in those circuits that require a fluid of the type ISO VG 32 TADAL BIOCUT 32 is a cutting oil designed to be the only oil used in workshops turning with automatic lathes.

TADAL BIOCUT

High-performance synthetic neat cutting oil, suitable for machining steel, aluminum, copper and their alloys. Chlorine free, formulated with paraffinic base oil and fatty additives that delivers high film resistance and cooling, whilst being operator friendly. TADAL BIOCUT does not contain phenolic derivatives or heavy metals such as barium or lead.

Easy removal with solvents or alkaline detergents Extends cutting tool life Excellent cooling properties Good protective power.

TADAL BIOCUT VP

A neat cutting oil for general machining of steels, copper, aluminum and their alloy.

Easy removal with solvents or alkaline detergents Provides excellent anti wear properties Excellent cooling properties Good protective power.