2017 Aerospace brochure - TPT Consultancy and Training by CP Creative

â&#x20AC;&#x153;Having been on many courses over the years that almost promoted death by PowerPoint, having good interaction with the people attending our courses is paramount to successful learningâ&#x20AC;? Gary Miller, Trainer/Consultant TPT Consultancy and Training

Contents Introduction • Contents

• About us

• Why us?

Aerospace Courses • IAQG Approved Aerospace Auditor Transition Training (AATT)

4 5

(4 Days) • IAQG Approved A.3 9100 Aerospace Industry Specific Course

(3 Days) • IAQG Approved A.4 9110 Aerospace Industry Specific Course

(1 Day) • EN9100:2016 Senior Management Transition Briefing (2-3 Hours)

• EN 9100:2016 Transition Training Course (2 days)

• EN 9100:2016 Internal Auditor Training Course (2 days)

• EN 9100:2016 Implementation Training Course (3 days)

• EN 9100:2016 Requirements Training Course (2 days)

• SC21 Supply Chain Improvement Programme

Bespoke Training

14-15

Map

TPT Consult Trainin About Us Our open courses are held in our state of the art training facility at the Orbit Business Centre, Merthyr Tydfil, CF48 1DL. We have a bespoke training room which is well equipped, modern and is set out to complement an accelerated learning environment rather than a traditional classroom based environment. Our approach provides an environment that supports learning and our tutors listen, help, guide, encourage, identify learning issues, and create an inclusive learning approach. Participants are encouraged to discuss and help each other, debate key learning points, investigate new concepts, build on prior knowledge and most importantly enjoy their experience.

Accreditations

tancy and ng Ltd Why us? • Over 25 years of experience. • The only IRCA Approved Training Organisation in Wales. • The only SC21 Strategic Partner in Wales.

courses ??? Providers in Europe approved to deliver the •About One ofthe only four Training Aerospace AATT Course. • One of only two Training Providers in the UK approved to deliver the Aerospace AATT Course. • Our trainers are members of several working groups.

Tom Townsend, Managing Director Tom has over 40 years’ experience in the manufacturing sector and has been consulting for almost 25 years, he has extensive knowledge and understanding of how businesses are managed. Having previously been a plant manager Tom has an appreciation of the challenges a Senior Management team face and the importance of strategy planning and effective deployment. A passion for fishing, Tom is a workaholic whose attention to detail is uncompromising and his knowledge of the tools required to make a business successful are extensive. . “My vision is that TPT are the training provider of choice, I cannot accept anything short of excellence”. © TPT Consultancy & Training | training@tptconsultancy.com | 01685 352717

Aerospace Training Courses • IAQG Approved Aerospace Auditor Transition Training (AATT) (4 days) • IAQG Approved A.3 9100 Aerospace Industry Specific Course (3 days) • IAQG Approved A.4 9110 Aerospace Industry Specific Course (1 day) • EN 9100:2016 Senior Management Transition Briefing (2-3 Hours) • EN 9100:2016 Transition Training Course (2 days) • EN 9100:2016 Internal Auditor Training Course (2 days) • EN 9100:2016 Implementation Training Course (3 days) • EN 9100:2016 Requirements Training Course (2 days) For full details on all our courses, please see the training brochure.

IAQG Approved Aerospace Auditor Transition Training (AATT) (4 Days)

Location: Orbit Business Centre Duration: 4 Days Cost: £1360 (+ VAT)/delegate Dates: 16th - 19th January, 8th - 11th May, 18th - 21st September 20th - 23rd November Overview: The course is focused on transitioning from ISO 9001 lead auditor to aerospace auditor (AA or AEA) depending on work experience. The training includes group workshops, individually assessed case study exercises and continual evaluation during the first 3 days of the course and a final evaluation of the candidate on the 4th day as a result of online examinations and interview. Ideal for 3rd party auditors.

ONE OF OUR HAPPY CUSTOMERS “Increasing our Aerospace Auditors by over 50% was a major strategic business decision by BSI and we wanted to engage with a training partner that not only understood the Aerospace Industry sector but also BSI training needs, choosing TPT Consultancy and Training was an easy decision. They took the time to sit down understand our company values and the passion we have for increasing the value which we deliver with our assessments. Their record in getting our auditors through the AATT training speaks for itself and the feedback from all attendees is unanimously positive so confirms that BSI made the right choice.” Steven Hughes, Certification Manager, BSI Certification

IAQG Approved A.3 9100 Aerospace Industry Specific Course (3 Days)

Location: Orbit Business Centre Duration: 3 Days Cost: ÂŁ900 (+ VAT)/delegate Dates: 13th - 15th March, 5th - 7th June, 2nd - 4th October 4th - 6th December Overview: The A.3 9100 Aerospace Industry Specific Course is designed for those who require an in depth understanding of the aerospace sector to enable successful transition to AEA auditor status. An auditor not yet authenticated as an AEA, shall be able to satisfy the requirements of BS EN 9104-003:2010, EN 9104-003:2010 (E) upon successful completion of this course.

ÂŠ TPT Consultancy & Training | training@tptconsultancy.com | 01685 352717

IAQG Approved A.4 9110 Aerospace Industry Specific Course (1 Day)

Location: Orbit Business Centre Duration: 1 Day Cost: ÂŁ550 (+ VAT)/delegate Dates: 16th March, 8th June, 5th October, 7th December

Overview: The A.4 9110 Aerospace Industry Specific Course for Repair/ Maintenance is designed for those who require an in depth understanding of the Maintenance and Repair sector to enable successful transition to AEA and AA auditor status. An auditor not yet authenticated as an AEA, shall be able to satisfy the requirements of BS EN 9104-003:2010 EN 9104003:2010 (E) upon successful completion of this course.

100 pas

s ra te cou on th is rse

EN 9100:2016 Senior Management Transition Briefing (2-3 Hours)

Location: Orbit Business Centre Duration: 2 - 3 Hours Cost: £350 (+ VAT)/delegate Dates: 13th January, 24th March, 19th May, 21st July, 29th September 17th November Overview: As a leader, your commitment and support is crucial to the success of your organization’s Aerospace Quality Management System (AQMS). This executive session highlights the benefits of an effective QMS and introduces you to the key requirements of 9100:2016. Through this, you’ll gain a better understanding of both your organization’s obligations and your personal responsibilities. Upon completion, you’ll be able to develop action plans for implementing key leadership activities.

EN 9100:2016 Transition Training Course (2 days)

Location: Orbit Business Centre Duration: 2 Days Cost: £250 (+ VAT)/delegate/day Dates: 11th - 12th January, 22nd - 23rd March, 17th - 18th May, 19th - 20th July, 27th – 28th September, 15th – 16th November Overview: Gain the knowledge required to successfully transition from 9100:2009 to 9100:2016. Learn about the new ISO high level structure, Annex SL, the changes to ISO 9001, and the differences between 9100:2009 and 9100:2016. All aerospace organizations with certification will have to comply with 9100:2016 after June 15, 2017. This course will give you the information required to carry out an effective transition to the new requirements that should enable a smooth transition from 9100:2009 to 9100:2016. This standard uses ISO 9001:2015 and the High Level Structure (HLS).

ONE OF OUR HAPPY CUSTOMERS “L-3 TRL Technology are on an excellence journey focussing on business and manufacturing excellence. The team at TPT has supported the process, conducting SC21 diagnostics to determine status of programme. This has assisted L-3 TRL by identifying key strengths and opportunities for improvement. The team at TPT has supported us in professional manner and the outputs from the diagnostics were used to benchmark L-3 TRL Technology against industry best practice and to identify opportunities for improvement.”

Andrew Barnes, Vice President Operations, L-3 TRL Technlogy

EN 9100:2016 Internal Auditor Training Course (2 days) Location: Orbit Business Centre Duration: 2 Days Cost: £250 (+ VAT)/delegate/day Dates: 1st – 2nd February, 19th -20th April, 25th – 26th September 29th – 30th November

Overview: Learn how to audit the processes of a 9100:2016 Aerospace Quality Management System (AQMS). An ineffective audit can mean severe consequences; resulting in process failure, customer dissatisfaction and regulatory noncompliance. Optimize your auditing skills with the internationally recognized 9100:2016, and boost your internal audit capabilities. Gain confidence in planning and performing an effective audit; as well as reporting, and assessing corrective action where necessary. This course develops the necessary skills to assess and report on the conformance, and implementation of processes, based on 9100:2016. You’ll learn how to initiate an audit, prepare and conduct audit activities, compile and distribute audit reports and complete follow-up activities.

EN 9100:2016 Implementation Training Course (3 days) Location: Orbit Business Centre Duration: 3 Days Cost: £250 (+ VAT)/delegate/day Dates: 13th – 15th February, 7th – 9th August, 23rd – 25th October

Overview: Good businesses understand quality; great businesses implement it. An ineffective AQMS can cost you time, money and customers. That’s why it’s important to get it right from the start. Implementing a framework based on 9100:2016 helps your business consistently deliver and drive continual improvement in your products and services. Gain the required skills to conduct a base-line review of your organisation’s current position and implement the key principles of 9100:2016. Using a step-by-step approach you’ll learn how to develop an implementation plan, create necessary documentation, monitor your AQMS and achieve continual improvement.

11 11

EN 9100:2016 Requirements Training Course (2 days)

Location: Orbit Business Centre Duration: 2 Days Cost: £250 (+ VAT)/delegate/day Dates: 16th – 17th February, 10th – 11th August, 26th – 27th October

Overview: Obtain detailed knowledge of the key terms, definitions and requirements of 9100:2016 and how the standard can help your organization to better meet customer needs. This course is designed to equip learners with an appreciation of how consistent and predictable results can be more effectively and efficiently delivered by the promotion/application of the process approach.

SC21 Supply Chain Improvement Programme

Location: On-site at your premises Duration: Contact us on more information on the duration Cost: This is a bespoke service therefore contact us for information on cost.

Overview: SC21 (21st Century Supply Chains) is a supply chain improvement programme aimed at raising the performance and competitiveness of the aerospace and defence industry. Although it is a voluntary programme, SC21 is fast becoming the industry benchmark for excellence, with most Primes insisting that potential suppliers must be working within an improvement framework such as SC21. As an SC21 Strategic Partner and SC21 Training Partner, TPT can help – using our knowledge and experience, we will provide you with the direction and support required to guide you through to SC21 recognition. The process is as follows: • Pre-positioning Review • BusEx, ManEx, RelEx and CSIP overview for the SC21 team • Business Excellence Diagnostic • Manufacturing Excellence Diagnostic • Relationship Excellence Diagnostic • CSIP development • RMR (Relationship Management Review) with Key Customer(s)

Bespoke Training About our bespoke courses Our bespoke programmes are developed specifically for your business needs to ensure you receive training that really addresses your business requirements. An essential part in achieving this, is understanding your objective, your organisation, to determine your needs so that not only do you get value for money, but that the training really impacts on your business performance.

ÂŠ TPT Consultancy & Training | training@tptconsultancy.com | 01685 352717

Training Delivered by Experts

We have a wealth of experience designing and delivering bespoke training programmes and the implementation of systems and processes that support our training programmes making them successful and sustainable. The training programmes are developed using “accelerated learning techniques” which focuses on learning by doing in a workshop based environment rather than “death by PowerPoint”. Our courses are interactive and are delivered by experienced practitioners with expertise in the subject, this ensures that the participants are relaxed, alert and motivated and have a clear understanding of the course objectives driven by a subject expert. Contact us for futher information on our bespoke course range.

ONE OF OUR HAPPY CUSTOMERS “TPT showed great flexibility in tailoring the training and coaching program to meet our needs precisely, taking into account where we were on our LEAN journey and what we wanted to achieve. The depth of experience that Tom was able to leverage from was instrumental in helping our team understand the processes and procedures. The use of real life examples from past projects coupled with practical demonstrations in our workplace really helped the team to absorb the learning. I would not hesitate to recommend TPT to other companies, Sicame will certainly be using them on our next round of LEAN training.” Nick Smith, Operations Director, Sicame UK

Llandudno

Wrexham

Aberystwyth

 To BIRMINGHAM

WE ARE HERE

Brecon

Haverfordwest Merthyr Tydfil

Swansea

How to get here



Newport



CARDIFF

To LONDON

 BRISTOL

By Car

By Plane

By Train

Our office is a 20 minute drive from Cardiff. Head north along the A470 and our office is adjacent to the 3rd roundabout. After exiting the A470 take a left at the next roundabout and then another left. Our office is straight ahead and parking is available free of charge.

There are several airports that provide excellent access to our premises. Cardiff Airport is the closest (34miles), followed by Bristol Airport (66 miles), Birmingham Airport (116 miles) and London has several airports.

Merthyr Tydfil train station is a short walk away (0.5 miles) and has regular trains every 30 mins to Cardiff.

From the M4 exit at junction 32 and head north along the A470. From the north follow the A470 south signposted Merthyr Tydfil. The A465 intersects the A470 at Merthyr Tydfil and provides excellent access from the east and west.

London Heathrow (156 miles) is the largest and nearest airport in London. Heathrow is 2 hrs 30 mins away by car and offers a direct route along the M4.

Cardiff Central Train station is in the city centre and provides access to the rest of the country and has regular trains (every half hour) to London.

â&#x20AC;&#x153;My vision is that TPT are the training provider of choice, I cannot accept anything short of excellenceâ&#x20AC;?.

Tom Townsend, Managing Director TPT Consultancy and Training

Contact details If you have any questions, please get in touch. Web: www.tptconsultancy.com Email: training@tptconsultancy.com Telephone: 01685 352717 @TPTCONSULTancy TPTConsultancy

TPT Consultancy & Training Ltd RF07 Orbit Business Centre Rhydycar Business Park Merthyr Tydfil CF48 1DL