Q9 Manual

A G U I D E TO E N S U R E T H E B E ST D E M O N ST R AT I O N / U S AG E O F T H E N E W Q 9 S E N S O R .

///////////////////////

CON TENT Usage ...............................1 The LED indicator on the Q-Sensor is your guide to what is happening with the helmet.

Testing..............................2 Demonstrating the features of the Qsensor.

LED Indicators..............3 Learn how to monitor the device operations/state.

SIGNALS Blue Blink Red Blink Red Glow Blue Glow

Disclaimer The information contained in these documents is confidential, privileged and only for the information and internal use of ABUS August Bremicker Sรถhne and its employess, and may not be used, published or redistributed without the prior written consent of Quin Design LLC.

01

USAGE

.......................................................

The LED indicator on the Q-Sensor is your guide to what is happening with the helmet. Whether the helmet is asleep, searching for a bluetooth connection, paired, etc is indicated through this light.

Learn what each signal means.

RAISE TO WAKE The ABUS Quin helmet does not have an on/off switch. Instead, the helmet automatically turns on with a raise-to-wake function. Just pick up your helmet and give it a light shake to wake it. A blue light indicates the helmet is awake.

02

PRIVATE AND CONFIDENTIAL. FOR INTERNAL PURPOSES ONLY

TESTING

.......................................................

1

Quin has developed a special demo firware for ABUS, wherein the impact threshold has been significantly reduced in order to easily simulate a crash event. To trigger a crash, bring the Q Sensor in contact with a surface from a height of 10 cm. If a crash is detected the ABUS Quin Ride app will countdown for 10 seconds before sending the alert.

The Q-Sensor uses double-authentication on crash events to cancel out false events, but the option to deactivate an alert is always available. Upon detection of the impact, the Q sensor will send your emergency contacts an alert with a link to your location. Contacts who have the app will be able to navigate to your location.

CRASH TESTING

.......................................................

.......................................................

Crash

SOS To trigger the SOS Beacon tap your helmet 4 times (4xtap). If you do not deactivate the alert before the countdown ends, the app will send your emergency contacts an alert with a link to your location.

Contacts who have the app will be able to track your LIVE LOCATION and/or navigate to your location.

2

Tap

x4 Times

03

SOS TESTING

PRIVATE AND CONFIDENTIAL. FOR INTERNAL PURPOSES ONLY

.......................................................

1

.......................................................

Indicators PAIRING MODE/ON Ready to Connect

Color : Blue

3

.......................................................

Signal : Blinks continuously

CONNECTION CONFIRMED

2

Glows once followed by blink interval indicating charge status.

Color : Blue Signal : Glows 1 sec.

CONNECTED STATE No indication ( LED off )

Signal : none

SLEEP MODE/OFF Not Connected

Color : none Signal : none

04

.......................................................

Color : none

4

PRIVATE AND CONFIDENTIAL. FOR INTERNAL PURPOSES ONLY

BATTERY CHARGER CONNECTION Led glows until charge is complete.

Color : Red Signal : Glows Continuously

STATUS

05

Type : Micro-USB

Tap

Times

Battery: Full

Blinks : 4 times

Battery: Medium

Blinks : 2 times

Battery: Low

Rapid Blinks : 4x2 times

Battery: Faulty

Continuous red blinking

PRIVATE AND CONFIDENTIAL. FOR INTERNAL PURPOSES ONLY

UPGRADE

DOWNLOADING Device is connected and undergoing upgrade

FOTA DOWNLOAD Updating Firmware

Color : Blue

Rapid Blinks : continuously

06

PRIVATE AND CONFIDENTIAL. FOR INTERNAL PURPOSES ONLY