Auto/Car Repair Tools

Chih-Tai Y&S Co.,Ltd.

Engine Series

Cylinder Tool

CH1308175

Cylinder Head Bore Jig Set

Description:

* This universal adjustable drilling guide set allows broken or sheared studs -especially on cylinder-heads or exhaust manifolds- to be quickly and accurately extracted, without the need to remove the cylinder-head. (Male Thread M8 and M10) * Time savings of between 2 and 4 hours can be achieved as the cylinder head has not to be removed from the vehicle. * Universal usage. * Straight boring out of old screw.

CH121430 Exhaust Spring Clamp Remover

Description: * For VAG * Robust steel tool for the safe removal and installation of the spring clamps used to attach exhaust system to manifold on VAG vehicles. * Use with 17mm wrench.

CH0812248 VW/Audi Cylinder Head Guide Tool

Description: * Guide pins with handle to install cylinder heads. * Application on 4 & 5 cylinder engines. * Content: -11mm guides pins x2pcs -12mm guides pins x2pcs

CH0915408 Gasket Alignment Tool(VAG)

Description: * To align the gasket on VAG engine. * The pins works on placing the gasket on the block accurately. Content: * 1pc M6 x 1.0mm pin extraction tool

1pc M6 x 1.0mm pin extraction tool (without handle)

2pcs M10 x 1.5mm long pins * 2pcs M9 x 1.25mm long pins * 2pcs M10 x 1.5mm short pins Application: * Beetle 2.0L (1999-2004) * OEM Ref.: 3450(3450-1, 3450-2, 3450-2A, 3450-3)

E-mail: chihtai@ms16.hinet.net

CH121423-A 17pcs Hydraulic Cylinder Set

Description:

* This tool enables controlled, professional and safe extraction of very tight-fitting injection nozzles in conjunction with a special pull spindle, a Injector Nozzle Puller with extraction bridge and a Hydraulic-Pump with manometer.

* The Hydraulic-Cylinder with shoulder nut together with a special pull spindle is placed onto the extraction bridge instead of a mechanical drive. The special manometer of the Hydraulic Pumps or ensures that the applied force can be checked during the extraction process.

Content:

* Pull Spindele M14*1.5(240mm) 1 pc

* Pull Spindele M14*1.5(315mm) 1 pc

* Pull Spindele M17*1(240mm) 1 pc

* Pull Spindele M17*1(315mm) 1 pc

* Pull Spindele M25*1(240mm) 1 pc

* Distance ring 1 pc

Maximum allowed force: 170 KN (17t)

Maximum stroke: 15 mm↑↓

Hydraulic oil connection: 3/8“-18 PT

Transmission bore in tubular piston: Ø16.5 mm

Cylinder overall height, piston retracted 89 mm

Cylinder overall height, piston extended 104 mm

Cylinder-Ø (outer) 79 mm

CH1308187

Cylinder liners Extractor Tool

Description:

* Cylinder liner puller complete with support brace.

* Wet heavy-vehicle (e.g. Mercedes Benz, MAN) cylinder liners, automobile and stationary-engine liners, and other parts may be extracted using this puller.

Operation:

* The spindle of the counter-support brace is screwed into the clamping nut of the puller, and the puller inserted into the liner.

* The counter-support brace is placed on to the cylinder block.

* Due to the newly-developed spreading system, when the spindle is turned, all three jaws spread quickly and without difficulty, until they are firmly seated beneath the edge of the liner.

* Then the nut of the counter-support brace is tightened.

* Suitable for cylinder liner Ø 60 - 160 mm

E-mail: chihtai@ms16.hinet.net

CH0915118

Exhaust and Tailpipe Cutter

Description:

* Fifteen blades effectively cut pipe so only 1/4”turn is needed for a complete cut.

* Use tool to cut pipes 3/4” to 3”(19 to 76mm) in diameter.

* Not for use on stainless steel.

CH0911149

BENZ-Guide Rail Pin Puller

Description:

* Can remove even the most stubborn pins form the cylinder head, unlike the short slide hammer previously used to attempt this job.

* This puller incorporates a thrust bearing to ease the pulling action.

* The overall length is 85MM. Which allows it to fit into those tight problem areas.

* Screw Specifications： M8 X P1.25 X M6 X P1.0 (1PCS) M8 X P1.25 X 30MM (1PCS)

CH0812144

Mounting Bushings and Gauge Pump / Nozzle

Description:

* Professional alignments check and adjustment of P/D Unit and installation of O-rings.

* If the pump/nozzle unit is not correctly installed , there is a risk of damage to the cylinder head and the pump/nozzle unit.

* Damage-free installation of the O-rings.

* Precise positioning of the pump/nozzle unit.

Application range:

* VW Phaeton and Touarge from 2003~2004

* VW T5 from 2004 5-cylinder and 10-cylinder diesel engines.

* AUDI A3 from 2004 4-cylinder and 4 valve diesel engines. CH0812183

CHIH TAI Y&S CO., LTD.

E-mail: chihtai@ms16.hinet.net

CH1214394 Solenoid Switching Valve Socket (Mercedes OM651)

Description:

* Design for removing shift vale for controlling piston cooling.

* Suitable for Mercedes Benz diesel engine OM651.

* Size: 1/2”dr. x 24mm

CH1308252

Wrinkle Band Piston Ring Compressor

Description:

* For compressing rings on pistons 2-5” in diameter. Time saving low friction ring compressor uses a wrinkle band design to cut contact area with ring in half.

* Prevents the tool from sliding into cylinder. One adjustment of the knurled knob sets the tool to the correct size for the entire piston set.

* Material: Blade: K5

CH1308255

Hydraulic Valve Lifter Puller

Description:

* This valve lifter tool is specially designed to go down through the push rod holes and expand inside the lifter and to pull lifter out of the bore.

* Remove hydraulic valve lifters from the top side of engine.

* Hardened steel jaws grip lifter by expanding into inside groove to lift valve lifters out of bore.

* Material-Blade: Iron, Handle: PP

CH1308160 Pre-Chamber Ring Socket

Description:

* For proper R&R of threaded ring which secures pre-chamber in cylinder head.

* Application on engine type: OM615, OM616,OM617, 91/93/95

E-mail: chihtai@ms16.hinet.net

CH1308257 Hydraulic Valve Lifter Puller

Description:

* These specialized tools are designed to both remove the diesel pump (detaching the pump from the pump sprocket) and to retain the position of the pump sprocket in-situ, whilst the pump is removed and off the engine. This allows the front sprockets/timing chain configuration to remain undisturbed and under reducing the level of engine dis-assembly required.

* A: Pump Remover & Sprocket Retaining Tool covers injection/HP pump removal on BMW models with M47/M47TU and M57/M57TU 2.0&3.0 diesel engines.

* B: Pump Remover & Sprocket Retaining Tool covers injection/HP pump removal on LAND ROVER FREELANDER and ROVER 75 models with Td4 and M47 2.0 diesel engines.

* A and B are similar, with the B being shorter in order to accommodate restricted access on the engines fitted transversely.

* The application procedure for fitting and use of these tools, is identical.

* The main purpose of these tools is to extract the pump from the pump sprocket and to retain the position of the pump sprocket insitu, whilst the pump is removed and off the engine. This allows the front sprockets/timing chain configuration to remain undisturbed and under tension, thus reducing the level of engine disassembly required.

CH200851

Valve Refacing and Seating Tool Set

Feature:

Application:

* Cutter Ø28-Ø37 75˚ and 45˚

* 5pcs Expandable pilot Ø5.5-Ø12.5 * T handle drive

E-mail: chihtai@ms16.hinet.net

Inject Tool

CH0812191 Fuel Injector Rail Assembly Remover Set

Description:

* The fuel rail and injector assembly used on the Hitachi SIDI system on 2010 LF1 3.6L V6 and LAF 2.0L ECOTEC has two seals on each injector, and these seals are installed with very tight tolerances.

* Once the engine has been run, injector and rail removal is very difficult, and the assembly must be removed as straight as possible to prevent the chance of damaging an injector bore in the cylinder head, or to the mount assembly.

* Each mount assembly contains an isolator, and cannot have any force applied to the mount for removal.

* EN-49248 installs in place of the mounting bolts, and reaches under the injector rail near each mount location.

* The hand wheels on EN-49248 at each mount location are tightened evenly to un-seat all injectors evenly, preventing damage to the injectors, cylinder head, and rail mount assemblies.

* Applications: 2010 Buick LaCrosse, Cadillac SRX, Chev.

Equinox OEM NO. EN-49248

CH200829

Petrol Injector Puller Kit Ford EcoBoost GDI PAT.

Description:

* Applications across the Ford petrol EcoBoost GDi engine ranges from 1.0lit to 2.0lit engines

* Dedicated slide hammer to ensure the correct shock level is used for injector extraction Equivalent to OEM 310-206

* For use with Ford Injectors No CM5G-9F593-FA

* This kit specifically caters for the Ecoboost range up to the 2.0 litre version.

* The machined split collet design fits over the injector securely and allows the use of a slide hammer (included in the kit) to steadily pull out the injector.

* It is very easy to use; the slim design fits down over the injector and the body of the tool is turned to securely grip the injector.

* The weight of the slide hammer has been carefully calculated to ensure the correct shock level is used for injector removal.

CH121411-AHM

4pc Diesel Injector Removal Set - Delphi & Bosch

Description:

* Specifically designed for removing Delphi/Bosch diesel injectors using a Slide Hammer(492mm) with 5/8" UNF thread.

* Adaptors can also be used with an air tool to loosen the injectors by vibration.

* Set of 3 adaptors plus a special tool for removing the internal part of Bosch injectors.

CHIH TAI Y&S CO., LTD.

CH1214360-Z Petrol Injector Puller(Bosch-GDI)

Description:

E-mail: chihtai@ms16.hinet.net

* Pulls Bosch GDI petrol injector straight out, without damaging the injector or head.

* The 2pcs jaw design with slide lock easily accesses and grips recessed injector.

* Suitable for Bosch GDI injectors found on many European, American and Asian vehicles.

* Works on Ford FTDI EcoBoost engine from 1.0L to 3.7L, GM SIDI Ecotec engine from 2009.

* OEM Ref. Ford 310-206, GM J-37281-A

CH121424

Injector Nozzle Puller

Description:

* Mercedes CDI

* Suitable for Mercedes CDI engine OM 668 e.g. A-Class

* The injector nozzle puller makes it possible to remove even nozzles that are a very tight fit in the cylinder head, without the cylinder head having to be removed from the engine.

CH121427-C

Injector Puller Set

Description:

* Mercedes CDi

* This six piece puller set has been especially designed for removing stubborn injectors on Mercedes Benz vehicles fitted with CDi engines.

CH1308172

Common Rail Injector Tool Kit

Description:

* Special tools to loosen and remove the injector internal fixings.

* Includes the Injector ball valve lapping tools and guide.

* 3pcs Injector ball valve lapping tools.

* 10mm Hex x 7.6mm.

* Denso CR Injector valve seat removal tool.

* 8 sided socket for Bosch CR Injectors.

* Internal fixing removal tool for Siemens CR injector.

* Applications include Bosch, Denso and Siemens injectors.

CH200884 6Pcs Injection Nozzle Adaptors

Content:

* 1pc female drive: M18 x 1.5

* 1pc adaptor:M17 x 1, for Bosch

* 1pc adaptor M20 x 1, for DENSO

* 1pc adaptor M25 x 1, for SIEMENS

* 1pc adaptor M27 x 1, for SIEMENS

* 1pc 1/2”dr. x H10 socket

CH200890 Diesel Injection Puller Set

Feature:

* Professional tool for removing the diesel injection nozzle.

* Suitable for Citroen and Peugeot 2.0+2.2 HDI engine.

CH121427-A

Injector Nozzle Puller With Slide Hammer

Description:

* Injector nozzles that do not fit very tightly can be pulled out without needing to take them apart or remove the cylinder block.

* The puller is additionally supported by the steel ball on the valve cover , which prevents the puller from tipping during the removal process.

* Applicable for Mercedes-Benz CDI engines OM 611/612/613

CH121427

Injector Extractor

Description:

* For removing seized or stuck Common Rail injectors without having to disassemble the cylinder head.

* Applicable for MERCEDES-BENZ CDI engines 611, 612, 613, etc.

* Especially suited to the limited spaces due to the cylinder head cover. * Contents:

Impact Extractor

Injector Claw

External Adapter-With internal threads. In conjunction with Impact Extractor.

1 Slide Hammer

E-mail: chihtai@ms16.hinet.net

CH121427-BM13

Injector Extractor

Description:

* For removing seized or stuck Common Rail injectors without having to disassemble the cylinder head.

* Applicable for MERCEDES-BENZ CDI engines 611, 612, 613, etc.

* Especially suited to the limited spaces due to the cylinder head cover

* Contents: 。 1 Impact Extractor

1 Injector Claw 。 1 External Adapter-With internal threads. In conjunction with Impact Extractor.

CH121427-B

Injector Extractor

Description:

* For removing seized or stuck Common Rail injectors without having to disassemble the cylinder head.

* Applicable for MERCEDES-BENZ CDI engines 611, 612, 613, etc.

* Especially suited to the limited spaces due to the cylinder head cover

Contents:

* 1pc Impact Extractor

* 1pc Injector Claw

* 1pc External Adapter-With internal threads. In conjunction with Impact Extractor.

CH1308245

Injector Nozzle Puller

Description:

* Specially designed for the removal of stubborn diesel injectors fitted on Mercedes CDI engines.

* Features injector cap removal socket, security hex key for removing the inner part of the injector and a puller to remove the injector without damaging the cam cover.

* This engine type is fitted mainly to C-Class, E-Class and Sprinter vehicles.

CH091595

Copper Washer Removal Tool (For Diesel Injector)

Description:

* Size: inner hole 7, length: 230mm

* Collet type easy to holding the copper washer.

CH0812247 BOSCH and LUCAS Diesel Injector Puller

Features :

*Assists removal of stubborn BOSCH and LUCAS diesel injectors for saving time when injectors are difficult to remove.

*With M8, M12, M14 adapters -M 8 x P 0.75 -M12 x P 1.5 -M14 x P 1.5

CH0812141

BMW Injector / Chamber Tool Set

Description:

* Set used to install new seals onto the injectors

* Application range: BMW N14, N18, N54 & N63 engines.

* Applications include: 2008 - 2010 BMW - 135is 2007 - 2010 BMW - 335i 2007 - 2010 BMW - 335xi 2008 - 2010 BMW - 535i 2008 - 2010 BMW - 535xi 2010 - 2013 BMW - 550i GT 2009 - 2013 BMW - 750i 2009 - 2013 BMW - 750Li 2007 - 2010 BMW - X3 3.0i 2011 - 2013 BMW - X5 2008 - 2010 BMW - X5 3.0i 2008 - 2013 BMW - X6

CH1308246

Diesel Injector Puller Tool

Description:

* The six piece puller set has been specially designed for removing stubborn injectors on Mercedes Benz vehicles fitted with CDI engines.

Contents:

* Connecting thread (injector nozzle): M18 x 1.5

* Slide hammer: 4.8kg

* Universal joint: M18 x 1.5

* Injector claw x 2PCS

CH1308281-2

24Pcs Injector Removal Set

Description:

* Suitable for the removal of stubborn Bosch/ Delphi diesel injectors.

* Features a flexible joint adaptor allowing the slide hammer to be used in restricted areas.

CH130846

CH1308193

E-mail: chihtai@ms16.hinet.net

Heavy Duty Slide Hammer Injector Remover Kit

Description:

* Specially designed for the removal of stubborn diesel injectors.

* Features injector cap removal socket, security hex key for removing the inner part of the injector and a puller to remove the injector without damaging the cam cover.

* Set includes: 4.8kg Slide Hammer (1pc); M18 x 1.5 Universal joint(1pc); Special hex bit insert 1/2” drive 10mm with bore Ø7.5mm(1pc) & 10mm with Bore Ø6.5mm(1pc); Injector disassembly

* Adapter(6pc) M14x1.5/ M16x1.0/ M17x1.0/ M20x1.0/ M25x1.0/ M27x1.0;

* Slide Hammer 4.8kg Universal

Adapters Applications:

* M14x1.5 MB CDI, Ford TDCI, KIA, BMW M47

* M16x1.0 Toyota 2.2 Diesel engines

* M17x1.0 MB Bosch

* M20x1.0 Denso

* M25x1.0 Siemens

* M27x1.0 Siemens

* M18x1.5-360° Swiveling Universal

Heavy Duty Slide Hammer Injector Remover Kit

Description:

* Specially designed for the removal of stubborn diesel injectors.

* Features injector cap removal socket, security hex key for removing the inner part of the injector and a puller to remove the injector without damaging the cam cover.

* Set includes: 4.8kg Slide Hammer (1pc); M18 x 1.5 Universal joint(1pc); Special hex bit insert 1/2” drive 10mm with bore Ø7.5mm(1pc) & 10mm with Bore Ø6.5mm(1pc); Injector disassembly

* Adapter(6pc) M14x1.5/ M16x1.0/ M17x1.0/ M20x1.0/ M25x1.0/ M27x1.0;

* Socket 1/2”x100mm (4pc) SW25/SW27/SW29/SW30

* Slide Hammer 4.8kg Universal SW25 BOSCH Universal SW27 BOSCH New generation SW29 Siemens, PSA, Ford, Toyota SW30 BOSCH Universal

Adapters Applications:

* M14x1.5 MB CDI, Ford TDCI, KIA, BMW M47

* M16x1.0 Toyota 2.2 Diesel engines

* M17x1.0 MB Bosch

* M20x1.0 Denso

* M25x1.0 Siemens

* M27x1.0 Siemens

* M18x1.5-360° Swiveling Universal

E-mail: chihtai@ms16.hinet.net

CH1308281 21pcs Injector Removal Set

Description:

* Suitable for the removal of stubborn Bosch/ Delphi diesel injectors

* Features a flexible joint adaptor allowing the slide hammer to be used in restricted areas.

Universal joint M18x1.5

Special bit insert hex 10mm x Ø7.6

1x special-use Allen SW10 with 7.5mm bore, 1/2 drive, to remove the fixing ring, for example, Bosch injectors at MB CDI and PSA HDI Special bit insert hex 10mm x Ø6.6 For releasing the internal screw of the CR injectors.

Pull Spindle: OT M16x1.0 For Denso (Toyota 2.2D) Pull Spindle: OT M17x1.0 For Bosch injectors, e.g., Alfa, BMW, Fiat, MB, PSA, Renault Pull Spindle: OT M20x1.0 For Denso Pull Spindle: OT M25x1.0 Siemens injectors, e.g. PSA (DW10)

Pull Spindle: OT M27x1.0 Siemens injectors, e.g. PSA (DW10)

Pull Spindle: IT M16x1.5 Pull Adapter for M16x1.5 thread, such as used in Facom tools.

Pull Spindle: IT M14x1.5 Internal thread for Bosch/ Delphi Injectors, e.g. MB (OM 629/642/646), PSA (DV4/ DW12), VW (CBD), BMW (M47).

Pull Spindle: IT M25x0.5 For Denso

Pull Spindle: IT M25x0.5 For Denso Pull Spindle: IT M27x1.0 For Siemens, e.g. Citron C5/ Jumpy/ Xsara, Fiat Ducato JTD, Peugeot 206/307/406/ Boxer (2.0/2.2/2.3 HDI) Mercedes-Benz CDI (except A-Class (Sprinter/ Vito) Special socket (25mm) For Siemens Injectors – 2.0 HDI (DW Series) As found on PSA, Ford, Toyota etc.

Special socket (27mm) For Siemens Piezo Injectors – 2.0 HDI Piezo (DW Series) As found on PSA etc.

Special socket (29mm) For Bosch type injectors – Bosch CDI /HDI engines

Special socket (30mm) For Bosch type injectors – Bosch Renault /Nissan 1.9 dCi Injector gripper (12mm) For MB CDI-engines, except Sprinter, Vito and A-class Injector gripper (13.5mm) For Opel Renault F9Q

Injector gripper (16mm) For Fiat Ducato JTD, Citron C5, Xsara, Jumpy and Jumper HDI and Peugeot 206, 307, 406, Boxer HDI (2.0, 2.2, 2.3I)

Injector gripper (26mm)

CHIH TAI Y&S CO., LTD.

CH081254

Injector Extractor(For MERCEDES)

Description:

E-mail: chihtai@ms16.hinet.net

* Specific for MERCEDES (C/E/S CLASS, VITO) INJ.

* Complete W/ SOCKET for dismounting the EL. Connection.

* MERCEDES / BOSCH Injector Solution.

* Extractor specific for MERCEDES injectors, complete with socket for dismounting the electrical connection.

* Application MERCEDES range: Sprinter, Vito, Viano, Vario

* Engines: CDI

CH081251

VW. AUDI Injectors Remover Set (FSI)

Description:

* Use “U” sleeve or two jaws hook to fix the injector and then pull out with slide hammer

* Application range: VW, AUDI (FSI) engine.

CH081255

Solution For BMW Common Rail Injectors

Description:

* Complete set for removing BMW CR Injectors without dismounting the cylinder head.

* Equipped with a blower adapter to clean the injector seats.

* Bosch injectors: common rail injectors mounted on BMW Application Engines:

* BMW Common Rail : M47TU, M57, M57TU

CH081283

Removing And Cleaning BMW Injectors Common Rail Diesel

Description:

* Complete set for removing BMW CR Injectors without dismounting the cylinder head.

* Equipped with a blower adapter to clean the injector seats.

* Bosch injectors: common rail injectors mounted on BMW Application Engines:

* BMW Common Rail : M47TU, M57, M57TU,M87,M87TU

CH081281

Injector Removal Tool Model FOSI

Description:

* For the extraction of extremely seized injectors. With the precisely tailored specifically for this.

* Application designed extractor, the injectors can be extracted hydraulically and / or mechanically.

Description: * Use ”U” sleeve or two jaws hook to fix the injector and then pull out with slide hammer * Special two jaws design to fix the injector and pull out with slide hammer Application range: * VW, AUDI (TDI)(FSI),SEAT, SKODA

CH081247-B

CH081250 Pump Injector Adjustor

Description:

* Adjustment gauge for testing the installation position or to adjust the pump/nozzle unit during assembly.

* The adjusting device (see picture) allows the use of the adjustment gauge on pump/nozzle units with new and /or old solenoid valve nuts.

* The gauge sizes are the maximum settings and can be changed accordingly by using the feeler gauge.

* Adjustment gauge for pump/nozzle unit size 2 , 3 cylinder

* Application Engines: Audi and VW pump/nozzle engines

* Attention: The two allen screws of the adjustment unit are not be unfastened.

* Picture solenoid valve nut:

* Other tools for the pump/nozzle engine: -XZN nut for the pump/nozzle unit -Puller for the pump/nozzle unit

* Dimensions a 3. cylinder: Old New

1. cyl. 244,2 ± 0,8 mm 245,0 ± 0,8 mm

2. cyl. 156,2 ± 0,8 mm 157,0 ± 0,8 mm

3. cyl. 64,8 ± 0,8 mm 65,6 ± 0,8 mm

CH081248

Pump Injector Adjustor

Description:

* Adjustment gauge for testing the installation position or to adjust the pump/nozzle unit during assembly. The adjusting device (see picture) allows the use of the adjustment gauge on pump/nozzle units with new and /or old solenoid valve nuts. The gauge sizes are the maximum settings and can be changed accordingly by using the feeler gauge.

* Adjustment gauge for pump/nozzle unit size 1 , 4 cylinder

* Application Engines: Audi and VW pump/nozzle engines

* Attention: The two allen screws of the adjustment unit are not be unfastened.

* Picture solenoid valve nut:

* Other tools for the pump/nozzle engine: -XZN nut for the pump/nozzle unit -Puller for the pump/nozzle unit

* Dimensions a 4. cylinder: Old New

1. cyl. 332,2 ± 0,8 mm 333,0 ± 0,8 mm

2. cyl. 244,2 ± 0,8 mm 245,0 ± 0,8 mm

3. cyl. 152,8 ± 0,8 mm 153,6 ± 0,8 mm

4. cyl. 64,8 ± 0,8 mm 65,6 ± 0,8 mm

E-mail: chihtai@ms16.hinet.net

CH121436

Diesel Injector Seat Cutter Set

Description:

* Identify injector "blow-by" exists (see previous page for possible symptoms).

* Gain access to the injectors and remove them.

* Select required reamer onto pilot post and tighten internal hex screw.

* Place assembled cutter into injector recess.

* Using the T bar and socket supplied apply only a small amount of pressure whilst turning the cutter in a clockwise direction only.

* Use a small amount of light lubricant whilst performing the cut to reduce chattering and help give a flat cut. Do not over cut the seat only remove enough metal to form a good seat.

* Thoroughly clean the seat and remove all swarf.

* Fit injectors as per manufacturer instructions.

Contents:

* CH121436-01-15*19mm Flat Reamer for Universal injector.

* CH121436-02-17*17mm Flat Reamer for Delphi/Bosch injectors (BMW/PSA/Renault/Ford).

* CH121436-03-17*19mm Flat Reamer for Bosch injectors (Mercedes CRD).

* CH121436-04-17*21mm Angled Resmer for Fiat/Iveco.

* T handle*1.

* Pilot post*1.

* Material: CR-V

CH0915113

Diesel Injectors Sear Cutter and Face Cleaner

Description:

* After removing used injector from cylinder head is important to clean seat of injector.

* All process is turning manually with little pressure.

CH121436-15

19Pcs Diesel Injector Seat Cleaner Set

Description:

* Use to clean injector/injector seat when changing injector.

* Help to avoid blow-back due to seated injector poorly.

* Suitable for a wide range of vehicles.

Content:

* Reamer(angled):17mm, 15.5x15.5mm,17x21mm,17.5 x 20.5mm

* Reamer(flat): 14x 14mm, 17x17mm, 15x19mm, 15.5x15.5nmm, 17x19mm, 17 x 17.5mm, 17x

19.5mm, 17 x 20mm.

* Reamer: 18 x 21mm, 20 x 21mm

* Reamer(long): 15.5mm

* Cleaner (injector): 19mm

* 1pc pilot

* 1pc T handle

* 1pc hex key

CH1308173

Injector Shaft Cleaning Set

Description:

* Wire brushes, size: ø18 x 2pcs, 19 x 2pcs, 21 x 2pcs, 24 x 2pcs, & 26 x 2pcs

* 2pcs Cleaning brush: 9mm x 100mm, overall length: 300mmL

* 1pc Flexible bit holder

* 1pc Adaptor with brush holder

* 1pc Mounting bar

* 2pcs Twisted brush wire

* 8pcs Sealing plugs

* 1pc Plastic sleeve for brush

CH1308174

Twisted-Copper Brush Cleaning Set

Description:

* Size: Ø 6 mm, Ø 8 mm, Ø 10 mm,Ø 13 mm and Ø 16 mm (Each 4 pieces)

* Versatile through 5 different brush size.

* Thanks to the flexible bit holder also useable for hard to reach holes.

*For cleaning soiled or rusted bores and guides:

*For example, the caliper sliding guide or the bore of the ABS sensor in the steering knuckle

Content:

* 1x Brush Holder with Collet

* 1x Flexible Bit Holder ¼"

* 4x Tube Brush Ø 6 mm

* 4x Tube Brush Ø 8 mm

* 4x Tube Brush Ø 10 mm

* 4x Tube Brush Ø 13 mm

* 4x Tube Brush Ø 16 mm

CH050348

Universal Steering Spreader

Feature:

* An universal spreader with special V design!

* The tool has V design which allows users to avoid bolting and reaching in the gap, so that operators can expand a little to bolt freely in the mounting.

* After bolting out the mounting, you can reach deeply if that’s necessary and also expand widely, which can make it strut out easily.

* Operating range: 4.4-10mm

CHIH TAI Y&S CO., LTD.

CH0915231

Universal Injector

Description:

E-mail: chihtai@ms16.hinet.net

CH1308202

CH0915152

CH0915401

CH0915375

* The kit is mainly for bosch injectors and covers a long row of car tubes, suitable for OPEL, FORD, PSA GROUP, FIAT, LANCIA. ALFA, KIA, HYUNDAI, TOYOTA, MAZDA, SUZUKI, IVECO, VOLVO.

* For demounting of firmly burnt injectors without demounting the Cylinder head.

* Suitable for 1.3, 1.6,1.9, 2.0 and 2.2 diesel engine.

Injector Shaft Cleaning Set

Description:

* To clean the injector shaft and seat as well as the injector surface.

VW/AUDI Diesel Injector Remover

Description:

* Suitable for VAG group TDI engine.

* Special two jaws design to fix the injector and pull out with hammer.

Injector Nozzle Remover (BENZ M278)

Description:

* This tool is designed for removing the injector by slide hammer or the T bar.

* Application: Benz M278 Engine.

* Engines: 133, 152, 157, 270, 274, 276, 278.

* Benz OEM No. REF.: 278 589 00 33 00

Benz Injector Nozzle Installer (M278)

Description:

* Fuel injectors must be installed immediately after calibration of the sealing rings.

* Clean base surface for sealing ring on fuel injector.

* Application: Benz M278 engine.

* Engine:133,152,157,270,274,276,278

* Benz OEM No. REF.: 272 589 00 43 00

* Material: Stainless steel

E-mail: chihtai@ms16.hinet.net

CH0915230

Chrysler 2.5/2.7 Crd Injector Puller

Description:

* The Chrysler crd injector puller is designed for use in-situ with no need to remove the engine.

* The extremely strong tool is perfect for the problem associated with the stuck and seized injectors in Chrysler 2./52.7 crd 16V

* The extremely strong tool is perfect for the problem associated with the stuck and seized injectors in Chrysler 2.5/2.7 16 valve VM engine.

CH1308154 Cam Gear Holder

Description:

* The clamp between the engine block or head and the back of the gear to lock it in place.

* Use on single, dual, or quad cam engines to hold valve timing during belt replacement.

* Excellent for diesel injection pump belt replacement.

* The cam gear holder's universal design is quick and easy to install.

CH121435-B

Open Ended Ring Wrench Socket Set

Description:

* Specially designed to loosen and tighten nuts and bolts in confined spaces - e.g. Fuel Injector connections.

* Size: 1/2" x 100 mmL

* Content: 12, 14, 16, 17, 18, 19mm

CH1214229

Double-Key Ring

Description:

* SW 17 x 17 ring open, unilaterally bent.

* For the injection line of diesel engines.

* Type: Universal

CH091590 6pcs Diesel Injector Socket Kit

Description:

* This socket set can be used for ALFA ROMEO, AUDI, CHRYSLER, FORD, LAND ROVER, MERCEDES-BENZ, PEUGEOT, ROVER, SEAT, VAUXHALL AND VOLVO.

CHIH TAI Y&S CO., LTD.

CH0915119

Diesel

Injector Nozzle Socket

E-mail: chihtai@ms16.hinet.net

Description:

* The set includes 4pcs diesel injector nozzle socket.

* 1/2”dr. socket can be used for Siemens & Bosch injectors.

* Suitable for Peugeot and Citroen with 2.0 engines (110/135HP) HDI engine.

* Size: 25,27,29 and 30mm.

CH091549

Diesel Injection Pump Puller(BMW)

Description:

* This tool is specifically designed for holding the sprocket/ chain in place when disassembling the VP44 injection pump and high pressure pump.

* Common rail fitted to BMW engine: 。 318D/COMPACT(E46)

COMPACT(46)

330D(E46)

CH0915107

Diesel Injector Socket

3.0D(E53)

Description:

* 21mm 1/5”dr. for FORD Dura-Torq engines.

* OEM303-677.

CH200849-1

Diesel Injection Pump Puller (2.5TDS Engine)

Description:

* To loosen diesel engine pump pulley from shaft on Mod.4Type: BMW M 51, Opel Omega 2,5 TD

CHIH TAI Y&S CO., LTD.

CH121435-D

Injection Line Socket

Description:

E-mail: chihtai@ms16.hinet.net

* Open 12-point socket for the operation of screwed connections on injection lines.

* On MAN commercial vehicles with D 20 engines – Common Rail injection systems.

*CH121435-D03, for BMW diesel engines and OPEL 2.5TD engines

* CH121435-D04, for injection lines e.g. on BMW, VW

* CH121435-D05, for injection lines on MERCEDES-BENZ 100, 130, 314, 360, 360h, 352a, 346/355, 401, 402, 403, 407h, 615, 616, 617；Long style.

*CH121435-D06, for injection lines on MERCEDES-BENZ M 352, A, 346/355, A ,401, 402/422, LA, 403, 407h, as well as for the dip stick guide tube on M 314；Long style.

CH200849-2

CH091188

Injection Pump Puller for BMW

Description:

* Applicable for BMW M47 , M47TU , M57 , M57TU engines.

* To lock the injection pump sprock in position and press out the injection pump shaft.

* This tool is required when removing the injection pump.

Locking Screw

Description:

* Injection pump locking screw, allows the injection pump to be removed without the loss of pump timing.

* Application : Mercedes engines OM602, OM604, OM605, and OM604 with a Lucas Injection Pump.

CH1214368-A

Diesel Injector Puller

Description:

* For removing diesel injector without remove the cylinder head.

* Suitable for BOSCH diesel injector.

* Size: M16 x 1.5

CHIH TAI Y&S CO., LTD.

CH1214368-B

Diesel Injector Puller (Hyundai/Kia)

Description:

E-mail: chihtai@ms16.hinet.net

* For removing diesel injector without remove the cylinder head.

* Suitable for Hyundai/ Kia A2 diesel engine.

* Size: M16 x 1.5

CH1214374

Diesel Pump Sprocket Puller (Renault/ Nissan/ Opel/ Vauxhall)

Description:

* The puller allows the diesel injection pump to be pushed out of the pump sprocket.

* To enable the pump removal without disturbing the timing belt.

* Suitable for Renault/ Nissan/ Opel/ Vauxhall 2.2L/2.5L diesel engine.

* OEM Ref. Renault MOT 1548 / Opel KM-6207

CH1308159

Diesel Pump Adjustment Tool

Description:

* Secure stand for the pump wheel when assembling and disassembling the high pressure pump exact positioning of the pump wheel no need to disassemble the tooth belt saves work of making further adjustment to the pump.

Application range:

* Diesel engines F9Q for Opel, Renault and Nissan vehicles.

CH0812224

Isuzu / Jackaroo Injector Sleeve Remover

Description:

* Used to remove the diesel injector sleeve on Isuzu 4JX1 diesel engine (1998~2004) Jackaroo 3.0L TDI.

* Product Code : ATET0110

CHIH TAI Y&S CO., LTD.

CH0812233

CH0812244

CH0812234

E-mail: chihtai@ms16.hinet.net

Universal Remover For JTD On Diesel Engines

Description:

* Universal Injector Remover with 4 adjustable feet for JTD Diesel Engines.

* Remover for common rail injectors.

* Application Models: FIAT, ALFA, OPEL, SAAB, SUZUKI ,Engines: JTD

* Thanks to the adaptable and adjustable legs in heights and inclination, this tool fits all the new common rail injectors.

BMW Combination Fuel Injector Remover

Description:

* Designed for removing fuel injector

* Applicable: BMW N54

* BMW OEM Number: 130180

VW Diesel injector Puller

Description:

* VAG 1.6L 4 cylinder common rail diesel injector remover(piezo injectors)

CH0812238-A

Fuel Injector Install Removal Tool (for BMW N20,N52)

Description:

* Special designed to install and remove the injector in N20,and new N52 engine.

* Application: BMW N20, N52.

CHIH TAI Y&S CO., LTD.

CH0812238-B

CH0812249

CH0812253

CH0812257

CH200839

E-mail: chihtai@ms16.hinet.net

Fuel Injector Install Removal Tool (for BMW N55)

Description:

* Special designed to install and remove the injector in N55 engine.

* Applicable: BMW N55 engine

Injector Puller Set for Cummins

Description:

* This helpful puller will handle a variety of injectors found in Cummins engines; mechanical L-10, PDT and PTD top stop 855NH.

*The two jaw design firmly grips the injector while it is being removed by the slide hammer.

Content:

* Special adapter for pulling STC injectors.

* OEM NO: OTC-5042

Fuel Pressure Regulating Valve Insert Tool

Application:

* For mounting the fuel pressure regulating valve N276 with the specified torque.

* Type / model: Various VOLKSWAGEN Group models

* Engine / assembly group: -4-cyl.Diesel engine (2.0l engine, common rail) generation I and II -6-cyl.Diesel engine (3.0l engine, common rail) generation I and II

* OEM NO : T10553

Diesel Fuel Injection Socket (Mercedes Benz)

Description:

* Used for installing and removing the pressure valve holder on MRSF-ERE injection pump on Mercedes-Benz diesel engines: 601, 602, 603, 605, 606, 615, 616, 617.

* Drive: 1/2" Square drive

Diesel Filter Wrench for VW 2.0TDi

Description:

* Design for renewing of the diesel filter on Audi / VW / Skoda / Seat 2.0I TDi

CHIH TAI Y&S CO., LTD.

CH200847 Flare Nut Wrench for Injection Line Screw

Description:

E-mail: chihtai@ms16.hinet.net

CH210586

* Design to remove the screw at the injection lines on MercedesBenz sprinter.

* Size: 3/8”dr. x 14mm x12PT x 85L

& CH210586-2 Oil Injector

Description:

* Includes flush gun, hose, canister and canister adapter.

* Designed to work with any light weight flushing agent which can be mixed with pressurized air.

Standard type:

* Item No.:CH210586, 1/2” ACME-M x 1/2” ACME-F(R134a)

* Item No.:CH210586-2, 1/4” FFL x 1/4” MFL

CH210586-3

& CH210586-4 Oil Injector

Description:

* Includes flush gun, hose, canister and canister adapter.

* Designed to work with any light weight flushing agent which can be mixed with pressurized air.

Easy Connect Type:

* Item No.:CH210586-3,13mm-M x 13mm-F Low-Side Coupler (R134a)

* Item No.:CH210586-4, 1/4” FFL x 1/4” MFL

CH0915412

Diesel Injector Seal Puller

Feature:

* This special tool is used to assist to extract the copper washers of seal diesel injectors.

* Used on commercial vehicles.

CH1308282

Injector Sealing Ring

Description:

* Ideal for removing firmly burned injector copper sealing rings from the injector shaft.

* No damage to the cylinder head

* Universal usage.

* Precision pressing on the sealing ring

* Simple handling and guiding

* Application range: BMW, Mercedes, Opel, Renault, Nissan, etc.

CH0312188

CH1214355

Description:

* This tool is designed for turning over engine, making adjusting injectors and valving lash easier.

* It works without the human helping when used to manually turn engine.

* This tool designed to rotate engine on a Mack E7 and Cat 3208.

* It works for Mack E7, E-7 ETEC engine, Caterpillar(CAT) engines 3200/3406 series C13/C15/C16/3208/3400/3406e/3508 /3512/3500 engines etc.

Description:

* Used for removing “pencil-type” ignition coil on 1.0L / 1.0L TSI / TFSI - 1.2L TSI - 1.4L TSI / TFSI - 2.0L GTI engines.

* Suitable for engine codes (petrol) : CJZB, CJZA, CBZB, CJZD, CYVB, CTHD, CTHA, CZCA, CZDB, CZDA, CMBA, CPVB, CPVA, CPCB, CHPA, CPTA, CAXA, CAVA, CAPB, CAVD, CXSA, CDGA, CXEA, CXSB,CKMA, CAVE, CHHB,

E-mail: chihtai@ms16.hinet.net

CH0911249

BMW Direct Injection Seal Installation Tool Kit

Description:

* Specially designed for removing and installing the injector

Application:

* BMW N13,N14,N18,N20,N26,N43,N53.N54,N55,N63,N73, S55,S63,B38,B48

* OEM NO.: 130 280 / 130 281 / 130 282 / 130 283 / 130 195 / 130 192 / 130 193 / 130 194 / 130280 / 130281 / 130282 / 130283 / 130195 / 130192 / 130193 / 130194

Valve Spring & Seal Tool

CH121409-AB

Valve Keeper Remover And Installer Kit

Description:

* For use on all motors with overhead valves-autos, motorcycles, marine, and aircraft.

* Will not bend or loosen valve springs.

* Works on gas or diesel engines; removes and replaces VW Rabbit keepers.

* Magnet retains keepers.

* Takes the place of C-clamp style removers.

* Fits most Overhead Valve applications

* Smaller size fits new Chrysler New World Engine and some Toyota four cylinders

* Comes in a handy plastic case

* Can work on the car or bench

* Magnet in tool body captures keepers for quick removal and valve disassembly

* Quickly removes and installs valve keepers on most overhead valve engines.

* Works on valve stems from 4.5 to 7.5 mm and 5/16" to 3/8".

* Magnet in tool body captures keepers for quick removal and valve disassembly.

CH050326

Valve-Spring Compressor Tool

Description:

* Suitable for the replacement of valve springs and valve stem oil seals without the need to remove the cylinder head .

* Opel , BMW , Seat , VW , Audi , Hyundai ,Toyota , Ford 16V , Renault 19 and Renault Clio .

E-mail: chihtai@ms16.hinet.net

CH091515 Valve Spring Compressor

Description:

* For large engines & diesel engines.

* Unique 'direct action' compressor lever gives improved visibility & ease of use in areas of difficult access.

* Collet release adapters: Restricted access adapter, 25,30mm

* Jaw opening (A) throat (B) , Min.: 35mm , Max.: 142mm , clearance: 150mm

CH0911117

Value Spring Compressor for CITROEN & PEUGEOT engine

Description:

* Is use to free the camshaft from tension created by contact with the valves and enables correct tension to be applied to the timing belt.

* Valve spring compressor for Citroen/Peugeot 1.1/1.4 engines from 1993/94.

CH1214228

Universal Valve-Spring Compressor Tool

Description:

* Installation example VW-Audi, Ford, Peugeot, Volvo, etc.

* Applicable for 1-12 cylinder engines - two up to four-valve technology, in-line-engines or V-engines.

* This tool permits renewal of valve-stem oil-seals with the cylinder head removed or cylinder head assembled.

* The retaining flanges are rotatable, so that they may be affixed to the cylinder head lengthways, sideways or diagonally.

* The correct height of the supporting rod may be adjusted due to the adjustment spindles on the left and right side, to achieve the correct angle between handle and the pressure piece for compressing the valve-spring. Moveable rests allow infinitely adjustment of the tool length and therefore an universal application for 1-12 cylinder engines.

CHIH TAI Y&S CO., LTD.

CH1214225-A, CH1214225-B, CH1214225-C Spring-Clip

Description:

E-mail: chihtai@ms16.hinet.net

Pliers

* For hose clips on cooling, heating, fuel or screen-washer systems.

* CH1214225-A 。 Standard-reach model with lock and pivoting jaws. 。 Length: 220 mm 。 Capacity:14~30 mm

* CH1214225-B 。

Long-reach model with lock and pivoting jaws. 。 Length: 282 mm 。 Capacity:14~60 mm

* CH1214225-C 。

Slip-joint model. 。 Length: 280 mm 。 Capacity:14~60 mm

CH1214226 Valve Seal Removal Pliers

Description:

* For Valve Stem Sealing Rings, e.g. on Opel, VW and Ford.

* The special long, slim form allows quick, easy and safe removal of valve-stem oil-seals, even on 4-valve cylinder heads.

* Straight design.

* Length: 275 mm

CH1214262

Valve Stem Seal Ring Pliers

Description:

* For easy and reliable removing of valve stem seals.

* For multi-valve engines.

* Universal application.

* Spring inside joint design.

CH1214267-1

Valve Adjusting Tool Set(Toyota,Lexus/Nissan)

Description:

* Design for adjusting valve easily.

* Suitable for most Toyota & Lexus/Nissan overhead camshaft engines using spacer shims.

* OEM Ref.: Toyota 09248-55040, Nissan KV101151S0

* Also for other OHC engines using spacer shims for valve adjustment: VW 5 cylinder, Audi 5000, etc.

CHIH TAI Y&S CO., LTD.

CH1214267-2

CH121496-A

CH121496-B

CH1214363

CH1214373

E-mail: chihtai@ms16.hinet.net

Valve Adjusting Tool Set(Toyota,Lexus/Nissan)

Description:

* Design for adjusting valve easily.

* Suitable for most Toyota & Lexus/Nissan overhead camshaft engines using spacer shims.

* OEM Ref.: Toyota 09248-55040, Nissan KV101151S0

* Also for other OHC engines using spacer shims for valve adjustment: VW 5 cylinder, Audi 5000, etc.

Crankshaft Seal Installer Tool

Description:

* For Volkswagen and Audi Group models with 16v 1.4&1.6 engines

* For 16v 1.4&1.6 engines fitted to VW、Audi、Skoda、Fiat

Crankshaft Seal Tool

Description:

* Removal and Installer

* This tool is specially designed for:

Volkswagen Golf/ Touran

Audi A3/A4 Covers

* 4 cylinder diedel engine applications including:

1.4i Turbo

1.4/1.6 Direct Injection (Petrol)

1.9/2.1 SDI/Tdi

2.0 Common Rails (Diesel).

Crankshaft

Seal Installation Tool- Rear (Land Rover)

Description:

* For installing the oil seal to rear of crankshaft.

* Suitable for Land Rover * Freelander 2 and Evoque with 2.2L diesel engine.

* OEM Ref.:303-1271

Crankshaft Seal Installation Tool- Front (Audi)

Description:

* For installing the oil seal to front of crankshaft.

* Suitable for Audi SQ7 2016~ (8-cyl. Common rail 4.0L TDI)

* Engine code: CZAC (EA898)

* OEM Ref. T40320/3

E-mail: chihtai@ms16.hinet.net

CH050307 Crank Seal Remover / Installer Kit

Description:

* Innovative, utility with Multi-patents.

* Allows the crank seal to be replaced without dismantling the crank case for time-saving and cost.

* Prevents scraping the crank surface that maybe caused by using other removal methods.

* Universal use covering a wide range of cars with oil seals between 27mm and 58mm in diameter.

* Use the existing bolt in the vehicle for installation

* Screw-type adapter to fit the centering

* The blue seal adapters are made of aluminum to prevent the damage of crank

* Long hooks 114mm are available.

CH0812263-A

CH0812263-B

Volvo Front Camshaft Oil Seal Installer

Description:

* Tool for installing Volvo Front Camshaft Oil Seal

* Comparable to Volvo OEM # 999 5718-5

Engine Codes:

B4184S10, B4184S2, B4184S3, B4184S9, B4194T2, B4204S2, B4204T2, B4204T2 CVVT, B4204T3, B4204T3 (CA) (US), B4204T4, B4204T5, B5202FS, B5204T2, B5204T3, B5204T4, B5204T5, B5204T8, B5204T9, B5234FS, B5234T2, B5234T3, B5234T4, B5234T6, B5234T7, B5234T8, B5234T9, B5244S, B5244S2, B5244S4, B5244S5, B5244S6, B5244S7, B5244SG, B5244SG2, B5244T, B5244T2, B5244T3, B5244T4, B5244T5, B5244T7, B5252FS, B5254S DENSO, B5254T, B5254T10, B5254T11, B5254T12, B5254T14, B5254T2, B5254T3, B5254T4, B5254T5, B5254T6, B5254T7, B5254T8, B5254T9, B6284T, B6294S, B6294S2, B6294T, B6304S3, GB5252S

Volvo Rear Camshaft Oil Seal Installer

Description:

* Comparable to Volvo OEM # 999 5719-3

Engine Codes: B4184S10, B4184S2, B4184S3, B4184S9, B4194T2, B4204S2, B4204T2, B4204T2 CVVT, B4204T3, B4204T3 (CA) (US), B4204T4, B4204T5, B5202FS, B5204T2, B5204T3, B5204T4, B5204T5, B5234FS, B5234T2, B5234T3, B5234T4, B5234T6, B5234T7, B5234T8, B5234T9, B5244S, B5244S2, B5244S4, B5244S5, B5244S6, B5244S7, B5244SG, B5244SG2, B5244T, B5244T2, B5244T3, B5244T4, B5244T5, B5244T7, B5252FS, B5254FS M 4.4, B5254S DENSO, B5254T, B5254T2, B5254T4, B5254T9, B6284T, B6294S, B6294S2, B6294T, B6304S3, GB5252S

Power Transmission: TF-80SC AWD, B4164S2

E-mail: chihtai@ms16.hinet.net

CH081264

Rear Seal Repair Tool Sets

Description:

* Works on 1994 - 2003 7.3L diesel engine in Ford 3/4- and 1-ton trucks

* A complete kit with the tools you need to properly remove and install the rear main oil seal and wear ring on the crank shaft

* Eliminates makeshift methods of seal removal and installation that could damage new seal or crankshaft

* To prevent personal injury when using these tools, wear eye protection

* Reach ANSI Z87.1 and OSHA standards

CH0812225

Crankshaft Rear Seal Remover/Installer Tool(Jaguar, Land Rover)

Description:

* To Remove And Fit Crankshaft Rear Oil Seal.

Applications:

* Land Rover: Range Rover Sport (2005 to 2009), Range Rover (2002 to 2013), Free Lander 2 (2006 to 2010), Discovery 3 (2004 to 2009), Defender (from 2007)

* Plus Jaguar: V8 XJ (X308 1997 to 2003), XJ (X350 2003 to 2010),XF (X250 2008 to 2013), S Type (X200 1990 to 2008) XK (100 1996 to 2006),XK (150 from 2006),

* OEM No: 303-538

CH081299

BENZ Rear Crankshaft Radial Sealing Ring Installer

Description:

* The crankshaft redial sealing ring has both a lip and a protective lip.

* They can not be damaged when assemble the cover to the crankshaft flange.

* This tool is design to prevent damage when assemble the cover to the crankshaft flange.

* Benz engine repair tool.

* Application range: Mercedes Benz M272, M271.

CH1308300

Front Cover Crankshaft Seal Installer

Description:

* Application include Paccar PX-6, 1989-2016 Cummins 4BT 3.9L, B Series 5.9L, ISB 5.9L 6.7L and QSB 5.9L 6.7L.

* Material: SCM440

CH1308204

Rear Oil Seal Installer Set

Description:

* This tool is made of plastic.

* Application: Gen III 4.8L, 5.3L, 5.7L, 6.0L, 6.2L and more

* Supercharged 6.2L V8s will have a 9-bolt rear crankshaft flange due to their performance output

CHIH TAI Y&S CO., LTD.

CH0812240

E-mail: chihtai@ms16.hinet.net

Front Crankshaft Oil Seal Fitting Tools (FORD/JLR)

Description:

* For use on duratorq engines.

* This kit is required when you replace the crank seal and when you remove the front engine cover to replace the chain.

* OEM 303-679A Front cover alignment tool.

* OEM 303-682 Front seal fitting tool and fuel pump sprocket cover removal tool.

Application range:

* Ford Transit, Ranger with 2.0/2.2/2.4/3.2 TDCi/TDDi engines plus

* Jaguar X Type X400 and Land Rover Defende

CH0812143 Cam Holding Tool (BENZ)

Description:

* Unique tool designed to lock the left intake cam in place while servicing the cam chain Drive system.

* Lock placed in rear intake cam and bolted to cylinder head locking the cam keeping it From rotating-reduces chance of mistake in the cam timing.

* Keeps related components in time with each other eliminating need for additional Man hours to hold cam in place.

Application range:

* Used on 272 and 273 Series MERCENDES-BENZ engines

CH0812243

Drive Flange Oil Seal Remover/Install Tool(VW, Audi)

Description:

* Removing and installing universal drive flange oil seal.

* Pulling in differential complete with freewheel, pulling off drive flange with gearbox in situ.

* Screw two M8 X 30 hexagon bolts into the flange.

* VW OEM number: VW 391 .

Application range:

* VW , AUDI.

CH0915418

Front Crankshaft Wear Sleeve Installer

Description:

* This tool is used for installing the front crankshaft wear sleeve.

* Application: Paccar PX-6, 1986-2016 Cummins 4BT 3.9L, B series 5.9L, ISB 5.9L 6.7L and QSB 5.9L 6.7L

CHIH TAI Y&S CO., LTD.

CH1308301-2

CH1308285

E-mail: chihtai@ms16.hinet.net

Front Crankshaft Seal and Wear Sleeve Installer

Description:

* Application include 1989-2016 Cummins 4BT 3.9L, B Series 5.9L, ISB 5.9L 6.7L and QSB 5.9L 6.7L.

* Material:SCM440

SAAB Crankshaft Rear Oil Seal Installation Tool

Description:

* This SAAB Crankshaft Rear Oil Seal Installation Tool is the best tool for replacing crankshaft oil seal.

* No damage to oil seal and related parts.

* This tool is easy to use and save time and money.

* This tool is designed to install the oil seals accurately.

CH1308264 Seal Puller

Description:

* Heat Treated Double-End Steel Head with Two Tip Sizes Black Oxide Finish Resists Corrosion Nickel Plated Tubular Steel Shaft Oversized Mechanic-Style Handle Removes Worn Grease and Oil Seals

Material:

* Blade: Carbon Steel

* Handle: PP

CH1308254

Sneaky Pete Oil Seal Remover/Installer

Description:

* Removes & installs upper rear main seals without dropping crankshaft. Includes everything needed to speed up a long, slow job.

* Cork screw puller makes it easy to remove old seal.

* Includes a pulling wire to install new seal w/ removable T-handle & spring steel clip that grips the seal firmly as it is pulled into position.

* Two extra clips are furnished.

* Saves many times its cost every time it is used.

E-mail: chihtai@ms16.hinet.net

CH200880 Sliding Hammer Extractor

Description:

* Extraction of stuck valve stem seals without causing damaged to the surrounding areas fits from 10-19mm.

CH2008108 Seal Removal and Fitting Set

Description:

* A 15 piece kit for the removal & fitting of oil seals without damaging the replacement seal or housing.

* A comprehensive kit with a range of adaptor sizes to fit most modern vehicles.

Content:

* 8 adaptors, sizes (inner x outer): 36 x 46mm, 38 x 48mm, 40 x 50mm, 40 x 52mm, 42 x 54mm, 44 x 56mm, 46 x 58mm, 48 x 60mm.

* 2 spacer adaptors, sizes (L x dia): 35 x 45mm, 65 x 45mm; 2 screw threads: M10 & M12, including washer and nut. Nut secured using 19mm socket or spanner (not included).

* 2 seal removers with different lengths and angles, ideal for removing seals in tight spaces.

Pulley

Description:

* Universal fit. * For biasing the auxiliary belt tensioner off and on during installation of the belt in the vehicle. * Particularly suitable for very tight spaces. * Size: E10,E12,E14,E16,E18 CH0812189

Description:

* Connect with 1/2 " ratchet, including 6sets of different hook sizes: -15mm ø 7 mm -22 mm ø 10 mm -24 mm ø 16 mm top, ø 10 mm shaft -35 mm ø 10 mm -19 mm ø 8 mm -16.5mm ø 16 mm top, ø 11 mm shaft

CHIH TAI Y&S CO., LTD.

CH0812250

BMW

CH091555

CH0812157

CH0812254

E-mail: chihtai@ms16.hinet.net

Mini Cooper (W11) Crankshaft Pulley Puller

Description:

* Using this tool to extract vibration damper

* Applicable: BMW MINI COOPER (W11)

* OEM No.: 11 8 450

Universal

Description:

* Hold the sprocket and undo the retaining bolt or nut and remove.

* This tool enables the removal of the camshaft sprocket on a wide range of vehicles

* Suitable: 45-70mm

Universal

Sprocket Puller Kit

Description:

* Hold the sprocket and undo the retaining bolt or nut and remove.

* This tool enables the removal of the camshaft sprocket on a wide range of vehicles.

* Suitable: 45~100mm

Content:

* 3PCS M10 x 1.5 x 55L

* 3PCS M8 x 1.25x 50L

Camshaft Sprocket Puller (VW)

Features :

* Used to remove Camshaft Sprocket from taper on Camshaft.

* Application: Volkswagen 1.9L T.D.I. Pumpe-Duse (BEW) (BRM) & 2.0L (4v) T.D.I. (CBEA).

* VW OEM NO : T10052

Camshaft Sprocket Puller

Camshaft

CHIH TAI Y&S CO., LTD.

CH091165 Camshaft Socket Puller for FORD

Description:

* OEM 21-229, 303-651

* Puller for camshaft pulley

E-mail: chihtai@ms16.hinet.net

* Engines Ford: FIESTA 1.8D Turbob (98-) / FOCUS 1.8D (98-)

CH1308293 Dual AVCS Exhaust Cam Sprockets Tool

Description:

* This tool allows you to remove the Dual AVCS exhaust cam sprockets without damaging the cam or the sprocket. The sprocket specific interface will not round out internal pulley splines like other designs. It is a perfect tool for cam seal renewal, cylinder head removal, or motor tear downs.

* Suitable for Subaru Impreza, WRU STI.

* Material: Carbon Steel

CH1308293-SOHC SOHC Camshaft Sprockets Tool

Description:

* Allows for removal of the SOHC cam sprockets without damaging the cam or the sprocket.

* Perfect tool for cam seal renewal, cylinder head removal, or motor tear downs bridged tool head handles the torque.

* Long integrated handle makes it easy for one person.

* Suitable for 93-12 Subaru Impreza SOHC engines, 99-12 Subaru Forester SOHC engines, 89-12 Subaru Legacy SOHC engines, 05-06 Saab 9-2X Linear SOHC engines, 04-06 Subaru Baja with SOHC engine, 92-97 Subaru SVX

CH0812232

Rear Camshaft Pulley Installer and Remover

Description:

* Special designed to install and remove rear camshaft pulley which connect to the water pump on V6 engine.

* Application range: FORD, MAZDA 2.5L , 3.0L ,V6 engine.

E-mail: chihtai@ms16.hinet.net

CH0812100

Camshaft Pulley Remover/ Installer

Description:

* Designed to hold the camshaft Pulley stationary while loosening and tightening the center shaft bolt.

* Using the centered screw rod to uproot the pulley.

* Locking screw : M8 M6

* Fixed distance : 54-120mm

CH1308267

Subaru Camshaft Pulley Wrench

Description:

* Special wrench designed to hold the camshaft pulleys while removing and/or installing the central bolt. The special design of this wrench avoids the possibility of damaging that pulley which has a composite plastic and steel construction.

* Material: Iron Application:

* 2002-2007 Subaru impreza WRX

* 2002-2007 Subaru impreza WRX STI (only exhaust camshafts)

* 2004-2008 Subaru Forester XT (only exhaust camshafts)

* 2005-2010 Subaru Legacy GT (only exhaust camshafts)

* 2005-2006 Saab 9-2X

* 2004-2006 Subaru Baja

CH1308272

Subaru Camshaft Pulley Wrench

Description:

* This tool allows you to remove the JDM AVCS intake cam sprockets without damaging the cam or the sprocket. It is a perfect tool for cam seal renewal, cylinder head removal, or motor tear downs.

* 3-piece welded construction with an integrated handle the torque and is designed for one person to do the job.

* Material: Iron

CH1308266

Crankshaft Pulley Holder (Volvo B230 Engine)

Description:

* Here is a handy way to keep the crankshaft pulley from turning when you are removing it to change the timing belt and/or the crankshaft seal on your B230 Engine.

* An absolute must on Volvos with automatic transmissions or when you don’t have air tools. The hole in the handle fits over the tensioner stud for a secure hold. Withstands the torque specs specified by Volvo for the crank bolt.

* Material: Iron

CHIH TAI Y&S CO., LTD.

CH1308284 Harmonic Damper Crank Pulley Holder

Description:

E-mail: chihtai@ms16.hinet.net

* A special wrench designed to secure the crankshaft pulley/harmonic balancer on Honda vehicles when removing the crankshaft bolt.

* The low prfile wrench featrues a 50mm hex that engange the pulley while providing sufficient space for a conventional socket or impact wrench to engage the crankshaft bolt.

* This tool is required to properly remove the crankshaft bolt without damaging the rubber-damping element that is built into the pulley.

CH1308294

Crank Pulley Tool

Description:

* This tool has an upgraded small pin reinforcement ring which helps loosen the toughest of crank pulley bolts. Also improved in the design is the low profile handle which allows you to remove the crank pulley while the radiator is still installed in the vehicle.

* Suitable for Subaru (Impreza, BRZ, Legacy, Forster, Outback, Baja, WRX STI), Saab 9-2X, Toyota 86, Scion FR-S.

* Material: Carbon Steel, Handle: PVC

CH1308295

Crank Pulley Removal Tool-Subaru

Description:

* Used to put all other tools to rest.

* Includes Plastic Washers (will not damage surface).

* Uses large 1/2” Socket Wrench.

* Suitable for Subaru (Impreza, BRZ, Legacy, Forester, Outback, Baja, WRX STI), Saab 9-2X Toyota 86, Scion FR-S

CH091530

Crank Pulley Hold Plate

Description:

* This tools set is use for hold crank pulley when remove or install pulley from crank shaft.

* Use for Toyota JZ type, 1G type, Nissan RB type, VG type, VQ type, not including DISEL types.

CH0915208

Crank Pulley Tool Kit

Description:

* Use for remove and install crank pulley from crankshaft.

* Use for TOYOTA JZ type, 1G type, NISSAN RB type, VQ type, not including DISEL type.

* Do not use with impact wrench.

*Contents:

1pcs main plate

2pcs M6*30mm(L) bolt

2pcs M6*40mm(L) bolt

2pcs M6*50mm(L) bolt

2pcs M6*60mm(L) bolt

2pcs M6*70mm(L) bolt

2pcs M6*80mm(L) bolt

2pcs M6*90mm(L) bolt

2pcs M8*40mm(L) bolt

2pcs M8*45mm(L) bolt

2pcs M8*60mm(L) bolt

2pcs M8*75mm(L) bolt

2pcs M8*85mm(L) bolt

2pcs M8*100mm(L) bolt

2pcs M6 collar

2pcs M8 collar

1pc main body

2pcs adaptor for main body

CH0812193

Harmonic Balancer Puller/Installer Set

Description:

* For easy removal of most harmonic balancers and drive pulleys which are pressed fitted onto the crank shaft

* A bearing-centered circular 2/3-way and an assortment of metric and fractional bolts and adapters provide wide coverage

* A heavy duty, 3/4" diameter forcing screw is internally threaded to fit the eight adapters to install harmonic balancers

* A blow molded plastic storage case keeps set contents organized and protected from loss Adapter sizes included: M16 x 2.0, M14 x 1.5, M12 x 1.5, 1/2"-20, 7/16"-20, 3/4"-16, 5/8"-18 and 9/16"-18.

* Fits all Ford, GM, and Chrysler engines with the adapter

Harmonic Balance Installer

Description:

* Includes eight adapters for use on a wide range of engines.

* Adapters sizes are 7/16"-20, 1/2"-20,9/16"-18, 5/8"-18, 3/4"-16, M12x1.5, M14x1.5 and M16x2.0

CH121453 Master Bolt Grip Set

Description:

* Master Bolt Grip Set works on harmonic balancers, steering wheels, crankshaft pullers, and gears.

* Capable of handling almost every two or three-way bolt pull possible on almost every car, pickup, SUV, and small engine.

Contents:

* Two or three way Yoke

* 4 pc Tip Set

* Metric Bolt Set- 8 mm x 80(3), 8 mm x 65(2), 8 mm x 40(3), 10 mm x 50(3)

* SAE Bolt Set- 5/16-18 x 4-1/2”(3), 5/16-24 x 3-1/2”(2), 3/8-16 x 4”(3), 3/8-16 x 2”(3), 3/8-24 x 2”(3), 5/16-18 x 2”(3)

* Center Screw for Puller(2)

CH1308239

Long-reach Harmonic Balancer/Pulley Installer

Description:

* Traditional harmonic balancer installers cannot be used to install the harmonic balancers on V8s and V6s for late model GM, Ford, Chrysler, Dodge vehicles.

* Reduce the risk of stripping threads inside the crank and breaking crank bolts.

* Material: CR-MO

Content:

* 1pc Center Screw M16 x 2.0 / for GM vehicles (2008-2012 4.8L, 5.3L, 5.7L, 6.0L, 7.0L Models)

* 1pc Center Screw M12 x 1.5 / for Ford vehicles (2004-2012 3.0L, 3.5L, 4.6L, 5.4L, 6.8L Models)

* 1pc Center Screw M14 x 1.5 / for Chrysler/Dodge vehicles (2006-2012 3.7L, 4.7L, 5.7L, 6.1L Models)

* 1pc Center Screw M12 x 1.75 / for Chrysler/Dodge vehicles (2006-2012 3.7L, 4.7L, 5.7L, 6.1L Models)

Description:

* Harmonic balancer removal is necessary to replace front engine seal, replace timing chains, and remove engine heads

* On 96-05 Ford Taurus and Mercury Sable this tool makes removing and replacing the serpentine belt extension pulley much easier. It provides a good method of holding the engine when removing the extension pulley.

* For 2.5L, 3.0L V6 Duratec & 3.5L EcoBoost engine from mid '90's to '16, including:

Ford F-150, Ford Contour, Ford Taurus, Jaguar S-Type, Lincoln LS, Mercury Sable Mercury Cougar, Mercury Mystique, Mazda Tribute.

E-mail: chihtai@ms16.hinet.net

CH0312191 GM, Chrysler Harmonic Balancer Puller

Description:

* Designed for removing damper pulleys in tight engine compartments, without removing the radiator.

* Kit contains the 3-jaw puller, four lengths of forcing rods, and a forcing screw with a 3/8" square drive for ratchet use, and a 3/4" hex for wrench or socket use.

Applications:

* GM 2000 Generation III 4.8L, 5.3L, 5.7L 6.0L, and 8.1L V8s.

* Also works on Cadillac 4.5, 4.6, and 4.9L V8s beginning in 1988.

* Chevrolet trucks 2003-later 4.2L I6, 2004-current 3.5L I5 and 2005-current 2.8L I4.

* Chrysler engines from 1990-later, including 2.0L, 2.4L-4s; plus 2.5L, 2.7L, 3.3L, 3.5L, and 3.8L V6s. Ford 1995-later V8 engines with 3 spoke pressed on damper.

* Mitsubishi Eclipse 1995-1999 2.0L DOHC non-turbo.

Mazda/Hyundai/GM/Chrysler Harmonic Timing Wheel Balancer Puller Tool Kit

CH0312191-C

Description:

* Designed to Remove and Install the Harmonic Balancer on the Most Popular Chrysler, Hyundai, Mazda Engines

* Works alos on GM 2000 generation III 4.8L, 5.7L, 6.0L and 8.1L V8s, Also works on Cadillac 4.5, 4.6 and 4.9 L V8s beginning in 1988.

* Chrysler engines beginning in 1990 thru 2002 can be serviced including 2.0, 2.4l L-4s. Plus 2.5L, 2.7L, 3.3L, 3.5L and 3.8L V6s.

* Includes: 3-Jaw Puller for Harmonic Balancer Jobs

CH0915424

Harmonic Balancer Puller

Description:

* Compatibility 3 & 6 spoke balancers

* No radiator removal to saving time

* Clip in compact design(no bolts required)

* Suitable for GM 5.3L, 5.7LS1, 6.0LS2, 6.2LS3, 7.0L /FORD COYOTE 5.0 /CHRYSLER/DODGE/JEEP 3.5L & 3.7L V6 and 4.7L, 5.7L, & 6.1L V8

CH0915419

Ford Crank Damper Holder(2.5/2.3/2.0L)

Description:

* Tool is used for holding the crankshaft damper on Ford 2.0L, 2.3L, 2.5L engines.

* Application: Fusion, Transit, Milan, MKZ, Escape, Ranger, Mariner & Hybrid models

CH091538 4” Offset Harmonic Damper Pulley Holding Tool (HONDA & ACURA)

Description:

*This unique tool has been developed to aid of removing and installing the crank bolt on most HONDA and ACURA engines.

* It has been re-engineered to work on 2004 and later new style SUVS with a 50mm damper pulley as well as all previous models serviced.

* When removing and setting the final torque specification on the pulley bolt ,this tool holds the harmonic damper pulley from rotating with a 1/2”breaker bar or ratchet.

* There is a hole in the center of the tool, it allows a socket to break tight of the pulley bolt.

Application:

* For HONDA ACCORD 2.2L 4 CYLINDER 90-97, 2.7L V-6 96-97, 2.3L 4 CYLINDER 98-02, 2.4L 4 CYLINDER 03 & LATER, 3.0L V-6 98 & LATER

* CIVIC 1.6L 4 CYLINDER 92-00, 1.7L 4 CYLINDER 01 & LATER, 2.0L 4 CYLINDER 03 & LATER

* CRV 2.0L 4 CYLINDER 97-01, 2.4L 4 CYLINDER 02 & LATER

* DEL SOL 1.6L 4 CYLINDER 93-97

* INSIGHT 1.0L 3 CYLINDER 00 & LATER

* ODYSEY 2.2L 4 CYLINDER 95-97, 2.3L 4 CYLINDER 98, 3.5L V-6 99 & LATER

* PILOT 3.5L V-6 03 & LATER

* PRELUDE 2.2L 4 CYLINDER 92-01, 2.3L 4 CYLINDER 9296,S2000 2.0L 4 CYLINDER 00-03, 2.2L 4 CYLINDER 04 & LATER

* ELEMENT 2.4L 4 CYLINDER 03 & LATER

*RIDGELINE 3.5L V-6 06 & LATER

* FOR ACURA,CL 2.2L 4 CYLINDER 97, 3.0L V-6 97-99, 2.3L 4 CYLINDER 98-99, 3.2L V-6 00-03 INTEGRA 1.6L 4 CYLINDER 90-92, 1.7L 4 CYINDER 92-93, 1.8L 4 CYLINDER 9301,LEGEND 3.2L V-6 91-95

* MDX 3.5L V-6 01 & LATER

* RL 3.5L V-6 96 & LATER

* RSX 2.0L 4 CYLINDER 02 & LATER

* TL 3.2L V-6 95 & LATER

*TSX 2.4L 4 CYLINDER 04 & LATER

*RDX 2.3L 4 CYL TURBO 06 & LATER

CH0312197-B

Harmonic Dampening Tool

Description:

* Keep crank pulley still avoid the harmonic dampening pulley from revolving in the course of moving and installing the conclusive torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines.

* Grip the crankshaft while tightening the crank bolt.

* To tighten crankshaft pulley by 2 screws(M8 x 1.25).

* Extend work needs 1/2”dr. wrench.

E-mail: chihtai@ms16.hinet.net

CH121432-AHM

Pulley-Extractor and Reaction Tool

Description:

* VW-Audi, Seat, Škoda, Opel/Vauxhall Ford, BMW, Mercedes, Peugeot, Citroën, Renault, Fiat, Japanese vehicles, etc.

* Loosen the retaining bolt and extract the Pulley.

* Suitable for all Pulleys with holes with a PCD Ø from 70 mm –100 mm.

* Suitable for hole Ø from minimum 20 mm.

* To lock the Pulley while loosening or tightening the retaining bolt, as well as preventing the Pulley from rotating during extraction.

* Any available ½“ ratchet or extension drive may be used as the reaction tool.

Consists of:

* 1 x Puller Plate

* 3 x Hook Ø 20 mm

* 3 x Hook Ø 26 mm

* 3 x Shoulder Nut M10

* 1 x Pressure-Unit

* 1x Hammer (L=495mm)

CH0915123

Ribbed Drive Pulleys Puller

Description:

* Universal design for clamps onto any ribbed pulley.

* This tool can be used for crankshafts, alternators, air conditioning units, and water pump.

CH0915123-A

Ribbed Drive Pulleys Puller

Description:

* Universal design for clamps onto any ribbed pulley.

* This tool can be used for crankshafts, alternators, air conditioning units, and water pump.

Description:

* For removal and replacement of the crankshaft bolt.

* Applicable: BENZ M272 ,M273

* OEM No.: A272 202 10 19

CHIH TAI Y&S CO., LTD.

CH1214384

Crankshaft Pulley Assembly Tool Set (VAG)

Description:

E-mail: chihtai@ms16.hinet.net

* For dismounting and mounting the crankshaft pulley on 4-cyl. 1.8L/2.0L 4V TFSI direct injection petrol engine (third generation EA888-timing chain).

* Tools for securing crankshaft pulley, keep everything in time while performing a chain service.

CH0812138-A

Crankshaft Harmonic Balancer Holder(BMW)

Description:

* Holds vibration damper when loosening and tightening center crankshaft bolt.

Applicable:

* BMW E81 120d 163PS

* BMW E46 318d 116PS - 318td 115PS - 318dt 115PS - 318d 115PS - 320d 136PS - 320td 150PS - 320d 150PS

* BMW E90 318d 150PS - 320d 150PS - 320d 163PS

* BMW E91 318d 122PS - 320d 150PS - 320d 163PS

* BMW E39 520d 136PS

* BMW E60 520d 163PS - 520d 150PS

* BMW E61 520d 150PS - 520d 163PS

* BMW X3 E83 2.0d 150PS

CH0812138-C

CH210581

Crankshaft Pulley Holder (BENZ)

Description:

* For removal and replacement of the crankshaft bolt.

* Applicable: BENZ M271

* OEM No.: A271 030 00 03

Pulley Spinning Tool

Description:

* For deep forged pulleys to turn off the crankshaft,camshaft,etc.

Application:

* Mercedes,VM-Audi,BMW,Ford,Opel, Peugeot,Renault,Rover,Volvo,Japanese cars.

Attention: It is not a counter-holding wrench for shafts.

CH1214398-AZ Cambelt Tool Set (Volvo)

Description:

* The cam-belt tool set provides the crankshaft holding tool and crankshaft/camshaft locking pins to allow the replacement of the camshaft drive belt.

* Suitable for Volvo 1.6, 1.8, 1.9, 2.0, 2.3, 2.4, 2.5, 2.8, 2.9,4 and 5 cylinder petrol engines; 2.0 and 2.4, 5 cylinder diesel engines.

* Volvo: C30, C70, S40, S60, S70, S80, V40, V50, V60, V70, XC60, XC70, XC90

* OEM Ref.: 9995433, 9997005, 9997007

* Set content:1pc crankshaft holding tool, 1pc crankshaft locking pin, 1pc camshaft locking pin CH200864

CHIH TAI Y&S CO., LTD.

E-mail: chihtai@ms16.hinet.net

CH0312132 Deep Counter Weighted Crank Bolt Socket Set

Description:

* Deep counter-weighted sockets to add more torque to break loose stubborn crank bolts specifically for Honda and Toyota.

* The set includes 17mm,19mm, 21mm.

Applications:

Honda-Acura, models: Accord, Civic, Pilot, CRV, Odyssey, CL TL Integra, MDX, vehicles

Toyota-Lexus, models: Camry, Corolla, 4Runner, Sequoia, ES300, LS400 vehicles

Any vehicle with a 17, 19, or 21mm crank bolt

Belt Tensioner

CH1214255

Toyota Timing Belt Tensioner Tool

Description:

* Effectively compresses hydraulically activated timing belt tensioners on 1995 and later Toyota T-100, Tacoma, and 4-Runner Truck.

* Also works on Toyota 5VZ-FE, 3.4L V-6 and 4.0L,4.3L,4.7L V-8 engines.

CH0915225 6PC Belt Tensioner Retaining Pins

Description:

* For use on automatic belt tensioners.

* Manufactured from spring steel.

* Six sizes.

CH0915102

Tensioner Roller Adjusting Tool

Description:

* VW/AUDI 1.8T tensioner holder kit used for holding timing belt tensioner and the accessory belt tensioner.

CH0915105 Tensioner Roller Adjusting Tool * Application

AUDI: A4(01-07), A6(01-05), CABRIOLET(03-07)

SEAT: IBIZA(04-07)

SKODA: SUPERB(02-07)

VW: POLO(06-07), EOS(06-07), PASSAT(01-05)

CH0915104 Adjusting Tensioner Belt Set

Description:

* Application to all VAG group.

CHIH TAI Y&S CO., LTD.

CH0911125 Universal Holder for Flywheels

Description:

E-mail: chihtai@ms16.hinet.net

CH091575

CH091576

CH0911165

CH0911166

* Required when installing and removing of flywheels, clutch plates and pulleys.

* Length: 250mm(L)

* Weight: 0.5kg

VW, AUDI Belt Pulley Holder

Description:

* Special design to hold the belt pulley on VW, AUDI

* Applicable: VW,LUPO, POLO/CLASSIC, GOLF, BORA & CADDY.AUDI：A2

VW Belt Pulley Holder

Description:

* Special design to hold the belt pulley on VW.

* Applicable: VW：LUPO, POLO/CLASSIC, BEETLE, GOLF, BORA & CADDY.SEAT：IBIZA/CORDOBA

BMW Mini Cooper Serpentine Belt Tool Kit for R50, R53

Description:

* This tool is used on Mini Cooper serpentine belt.

* Used to hold the serpentine belt tensioner on the supercharged Mini W10 engine

* Use this belt tool to loosen the camshaft pulley, and use it to lock the camshaft pulley tensioner at the same time,then remove the parts under the oil pan and the pulley.

BMW Mini Cooper Serpentine Belt Tool Kit

Description:

* This tool is used on Mini Cooper serpentine belt.

* Used to hold the serpentine belt tensioner on the supercharged Mini W11 engine.

* Applicable: Mini Coopers S/ W11 Engine.

CHIH TAI Y&S CO., LTD.

CH0911159

Multi Positional Tensioner

Description:

* For VW & Audi used.

CH0911160

Multi Positional Tensioner

Description:

E-mail: chihtai@ms16.hinet.net

CH091191

CH1214347

* Tensioner wrench with five adjustable positions for use on many VAG models where access is restricted.

* The adjustable key allows to tighten the free roller in spaces even limited.

Timing Belt Double -Pin Wrenches

Description:

* This is the Best Quality V159 you will find anywhere.

Pin Wrench for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes.

* This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80. eg; Double Pin Wrench special steel, burnished, for idler pulley on toothed belt, distance of pins 18 mm,diameter of pins 2.9 mm for deep located idler pulley on toothed belt on1,6 l diesel engine VW van T3 (up to model 1991).

Belt Tensioner Tool (Mercedes)

Description:

* Effectively compresses hydraulic belt tensioner on Mercedes W169 and W245 (alternator with start-stop function).

Application:

E-mail: chihtai@ms16.hinet.net

CH0915104-A 4Pcs Adjusting Tensioner Belt Set

Description:

* Application: all VAG group

CH091190

3Pcs Timing Belt Double-Pin Wrenches Tools Set for VW&AUDI

Description:

* The belt tensioner roller has two holes in which the two pins of the Double V159- ,VAG 3387, T10020 are inserted allowing them to turn the belt tensioner roller and to tension the timing belt.

* Timing belt tensioner pins T10115, T40011 and pin-T10060/A

* For use on: Lupo. Polo 1.4 TDi PD Golf, Bora, Polo 1.9 TDi PD Beetle, Sharan 1.9 TDi PD Passat 1.9 TDi PD Audi A2 / A3 1.4 / 1.9 TDi PD A4 / A6 1.9 TDi A4 / A6/A8 ALLROAD 2.5 V6 TDi

CH121426-C

Universal Belt Tensioner Wrench Set

Description:

* 13 sizes for v-belt and timing belt.

* Double ended:12,13,14,15,16,17,18,19 mm

* Single ended:E10,E12,E14,E16,E18

* Material:S45C&PP

* HARDNESS:38~42

CH0911115 Belt Tool Kit for Elastic –Ribbed Belts

Description:

* Suitable for engines with elastic ribbed belts such as Alfa Romeo, BMW, Chrysler, Fiat, Ford, Mercedes, PSA, Seat, Skoda, Smart, Volvo, VW-Audi, etc.

* The tool set is the quick and easy removal and installation of the new elastic ribbed belts required.

* Without this tool, the proper removal and installation is almost impossible because the leadership does not have a belt tensioning device and thus has a discharge of the belt is not possible.

CHIH TAI Y&S CO., LTD.

E-mail: chihtai@ms16.hinet.net

CH0915121 Ratcheting Serpentine Belt Wrench Set

Description:

* Service approximately 90% of all vehicles equipped with springloaded serpentine belt tensioners.

* Ratcheting action allows quick and easy positioning of wrench driving end for tensioner access from any angle.

* Can be used when servicing serpentine drive belts or any belt driven accessories.

* Specifically designed to fit into tight areas.

CH121458-C Serpentine Belt Tool

Applications:

* 3/8”Drive 13mm crowfoot wrench GM Quad Four Engine

* 3/8”Drive 14mm crowfoot wrench Saturn Engine

* 3/8”Drive 15mm crowfoot wrench Ford Windstar with 3.8L Engine

* 13mm Socket (on handle)-Late model GM Quad Four Engine

* 14mm Socket-1.9 Liter Saturn

* 15mm Socket-Some GM and Chrysler

* 16mm Socket-Ford 3.8 L & 4.0 L

* 18mm Socket - GM 3800 Engine

* 3/8" Square Drive Socket - 3.1 Liter GM

* 1/2" Square Drive Socket - Late Model GM and Ford

* Short Extension - Allows easier access on some Fords

CH0312190-K 15Pcs Ratcheting Serpentine Belt Tool Set

Description:

* Complete tool set for removing or installing the serpentine belt on vehicles with a spring loaded belt tensioner pulley.

* Long bar can hold sockets directly or attach to the ratcheting wrench for max. access.

Content

* 1pc long bar

* 1pc special gear wrench

* 3pcs adapters: 3/8”, 1/2”, 3/4”

* 7pcs 6 point sockets: 13, 14, 15, 16, 17, 18, 19mm

* 3pcs crowfoots: 13, 14, 15mm

CH121414 Reaction Wrench for Crankshaft Pulley (German Utility Model)

Description:

* For VW-Audi 4 and 5 cylinder engines with and without harmonic damper.

* To provide a reaction onto the crankshaft front pulley so that the central pulley bolt may be lossened or tightened.

* Required for timing belt changes, oil-seal replacement and during engine repairs.

* Advantage: By using the 2 extension handles, the loosening and tightening of the central crankshaft pulley bolt can be undertaken by a single mechanic.

E-mail: chihtai@ms16.hinet.net

CH1214227 Reaction Wrench

Description:

* For V-ribbed belts.

* When changing the poly-V belt the permanent belt tensioning roller can be loosened with the reaction wrench.

* Application: VW Polo, Golf, Passat, T4 and Audi.

* Advantages: The attachment element can be changed.

CH1308156 Reaction Wrench

Description:

* Used to relieve pressure on the timing belt by pushing back the automatic idler pulley.

* Due to extremely limited space, in particular on Transporter models, it is very difficult push back the automatic idler pulley, in order to change the V-ribbed belt.

* The tension tool is operated by a 3/8" socket.

* Suitable for the Mercedes Transporters series 208 D to 410 D with engines types OM601 and OM602 and also for Mercedes passenger cars with hydraulic pump for self-levelling suspension.

CH200861 Reaction Wrench for Tension Adjuster

Description:

* For V-ribbed belts.

* When changing the poly-V belt the permanent belt tensioning roller can be loosened with the reaction wrench.

* Application: VW Polo, Golf, Passat, T4 and Audi.

* Drive: 1/2"Ideal for wishbone extraction when you need to change the belt.

* Size 86mmL

CH0812223

Belt Tensioner Tool

Description:

* This specially designed tool allows the technician to access most T-60 Torx belt tensioners on BMW N54 and N55 engines found in many models from 2007 to 2013. The tensioner is in a confined area that a standard T60 socket has a hard time accessing.

* This unique wrench design allows the technician to loosen the spring pressure with minimal force and still maintain access to the lock pin hole.

* Designed to cut labor time by reducing the number of parts needed to be removed in order to gain clearance for the tensioner.

Application:

* BMW N54. N55. T60. Serpentine 12500

CHIH TAI Y&S CO., LTD.

CH1308288

Volvo Serpentine Belt Tool

Description:

E-mail: chihtai@ms16.hinet.net

* This square head wrench fits into the idler pulley and turns it to release tension for replacement of the serpentine belt.

* Applicable: VOLVO vehicles after 1995

* Drive Size: 19mm Square

* Length: 310mm

CH210546

Belt Tensioner

Description:

* For adjusting of the toothed belt at the automatic tensioning pulley

* Especially for VW Polo Diesel,AUDI 100 since 1991,AUDI A6 with 2.5 l TDi engine

* s 32 mm

* Special steel

* Surface mat chrome-plated, handle plastic coated

CH1214416

Volvo Belt Tensioner

Description:

* Used to service the serpentine belt.

* Size:T50, M14, T60

* Model: 240,C30,C70(06~), C70 Convertible(~0 5), C70 Coupe(~02), S40(~04),S60(~09),S70,S80(~06), V40(~04),V50,V70(~00),V70(00~08), V70XC (~00),V70XC(01~),XC70(~07),XC90(03~)

* OEM Ref.:9997109

CH1214416-A

Mercedes Belt Tensioner

Description:

* Used to service the serpentine belt.

* Size:T55

* Model: W176(A class), W246 (B class), C/X117 (CLA class), X156(GLA class)

* Engine: M133, M270 (Petrol)

* OEM Ref.:W270589000700

CH1214387

Hybrid Belt Tensioner Tool (Hyundai/Kia)

Description:

* The tool must be used to compress the stiffer hydraulic tensioner as part of the Hybrid Starter generator (HSG) belt removal steps.

* Size: 17mm

Application:

* Hyundai: Sonata/ loniq

* Kia: Optima/ Niro

* OEM Ref.: 09244-G2100, 09252-2E100

CHIH TAI Y&S CO., LTD.

CH0812241

BMW(N52K) V-Belt Installation Tool

Description:

E-mail: chihtai@ms16.hinet.net

* Special designed for installing the V-belt without causing damage.

Application range:

* BMW N52K engine(2006~2010)

* BMW OEM number: 111240 111241 111242.

CH1308265

CH1308152

6 Point V-Belt Pulley Socket

Description:

* For installing and removing the V-belt pulley at the generator on VW transporter T4 since 1991, Golf III/Vento since 1992, Passat since 1988, Corrado since 1989, AUDI 80 since 1992, AUDI 100 since 1991

* 24mm outside hexagon drive with 12mm bore hole

* Chrome-Vanadium

* Surface chrome-plated

* Material: Chrome Vanadium

Assembly Lever for V-Ribbed Belt

Description:

* For the operation of the tensioner roller and for installing the Vribbed belt on Mercedes-Benz type 168, 169 (A-Class), 245 (BClass)

CH1308162

Timing Belt Tension Tool (Chrysler)

Description:

* Application on Chrysler 2.2L & 2.5L engines.

CH1308287 Belt Holding Tool

Description:

* Universal tool set ideal for fitting stretch belts on a wide range of vehicles.

* Material: Nylon

CHIH TAI Y&S CO., LTD.

CH031276-H Belt Remover/Installer

Description:

E-mail: chihtai@ms16.hinet.net

* Combination removal and installation tool for most stretch belt applications found on many accessory drive systems.

* Unique magnetic faces hold the tool in place on the pulley.

* Helps prevent damage to belt or pulley during removal or installation.

* Compact, one-piece tool can be used on the front or back side of the pulley

CH121003

V-Belt Measuring Gauge

Description:

* For measuring inner lengths of V-belts, timing belts and ribbed belts.

* The measuring gauge is the perfect aid for measuring inner lengths.

* The possible measuring ranges are: 500-2500mm inner length (Li).

CH181206

Toyota Belt Tensioner Adjuster Socket

Feature:

*Required for removing idler pulley on 1.8L Toyota 1998-2008. *Use with 1/2” dr. or 7/8” hex drive tools.

E-mail: chihtai@ms16.hinet.net

Fuel Line Tool

CH1214233

Fuel Tank Lid Wrench

Description:

* This tool is designed to remove and install the fuel tank locking ring.

* 120mm internal diameter with 3 slotted teeth to grip ring.

Application ( 2000 ~ ) :

* Audi - A3, A4, A6, A7, A8, Q3, Q5, Q7, R8, TT.

* VW - Polo, Beetle, Golf, Golf Plus, Golf Cab, Jetta, Eos, Scirocc o, Passat, Passat CC, CC, Sharan, Touran, Tiguan, Touareg,Phaeton, Caddy , Transporter including LCV models.

* Porsche - Cayenne.

CH0915246

BMW/Volvo Fuel Tank Lid Remover

Description:

* The tool is used for removing and installing the metal fuel tank lid.

Applicable: -BMW(F01/F02/F25) -740I N45 (2011-2012) -750i N63 (2009-2012) -750I XDRIVE SEDAN N63(2010-2012) -BMW ALPINA B7 N63 (2011-2012) -BMW ALPINA B7 XDRIVE N63 (2011-2012) -740LI N54 (2011-2012) -750LI N63 (2009-2012) -750LI XDRIVE SEDAN N63 (2010-2012) -760LI SEDAN N74 (2010-2011) -BMW ALPINA B7 LBW N63 (2011-2012) -BMW ALPINA B7 LBW XDRIVE LWB N63(2011-2012)

-X3 XDRIVE 28I A N52T (2011-2012) -X3 XDRIVE 35I A N52T (2011-2012)

CHIH TAI Y&S CO., LTD.

CH0911150

BENZ-W210 Fuel Tank Cup Wrench

Description:

E-mail: chihtai@ms16.hinet.net

* The tool removal the plastic fuel tank cup.

* Apply on BENZ type W210.

CH0911154

Benz Fuel Tank Lid Dissembler

Description:

CH1308179

Volvo Fuel Tank Lid Tool

Description:

* Special designed to remove and install the fuel tank lid on VOLVO XC90 diesel or petrol engine.

1* /2" DR. x 18 points 106mm

Applicable:

* VOLVO - XC90

CH1308208

Volvo

Fuel Tank Lid Tool (155mm,12point)

Description:

* Special designed to removed and install the fuel tank lid on VOLVO diesel or petrol engine. 1/2” DR. x 12 points 155mm

* Applicable: VOLVO – XC60, XC70, S40, S80, V50

CHIH TAI Y&S CO., LTD.

CH1214367

Fuel Tank Locking Ring Tool (Fiat)

Description:

E-mail: chihtai@ms16.hinet.net

* This tool is designed to remove and install the fuel tank locking ring on Fiat Freemont, 500L, 500X；Jeep Renegade, etc.

CH1214370

Fuel Tank Locking Ring Tool (VAG)

Description:

* This tool is designed to remove and install the fuel tank locking ring.

* Suitable for VAG vehicles, Audi A4 2008~2016, A5 2008~2016, A6 2005~2011, A8 1994~, A8 2003~, etc.

* OEM Ref.: T40068A

* Size: 1/2”dr. x 21mm

CH1308279

Toyota/Lexus Fuel Tank Lid Wrench

Description:

*Suitable for Toyota & Lexus vehicles from 2004 & up *9-slot design with 173 mm OD & 143mm ID

*Use with 1/2" square drive tools

CH1308180 BENZ Fuel Tank Lid Wrench

Description:

*

* Size:1/2” drive 22points

* External diameter 190mm,internal diameter 145mm

Application:

* Mercedes Benz W164 ,W251

CHIH TAI Y&S CO., LTD.

CH1214336-A

CH1308198

CH0812156

CH1308207

E-mail: chihtai@ms16.hinet.net

Fuel Tank Locking Ring Tool (Alfa Romeo/Fiat/Lancia/Ford)

Decsription:

* This specialized tool is designed to remove and install the fuel tahnk locking ring of FCA group and Ford.

* Also allows the removal of the locking ring without lateral ribs.

* Szie: 1/2”dr. x 21mm

Application:

* Alfa Romeo: GT, 147, 156, 159, 166

* Fiat: Grande Punto, Idea, Linea, Multipia, Panda, Nuova 500, Nuova Bravo, Panda 4x4, Punto, Sedici, Doblo, Croma, Stilo, Ducato, Doblo Cargo, Idea Van, Grande Punto Van, Multipla Van, Panda Van, Stilo Van, Scudo

* Lancia: Y, Ypsilon, Musa Thesis

* Ferrari: 360 Spider, 430 Coupe, 430 Scuderia, 430 Scuderia Spider 16M, 430 Spider, 575 Superamerica, 575M Maranello, 599 GTB Fiorano, 612 Scaglietti, Enzo

* Maserati: 4200 Coupe, 4200 Gransport, 4200 Spyder, Gran Turismo, Quattroporte

Benz Fuel Tank Lid Tool

Description:

* For Mercedes Sprinter 2008-2017

European Car Fuel Tank Lid Remover/Installer

Description:

* Remove the tank while fixing or replacing the fuel tank.

* The tool will help you remove the tank lid easily.

Applicable:

* BMW (E36/E46/E39)

* BENZ (W211/W203) , ML230(163136) , ML320(163154) , ML350(163157) , ML430(163172) , ML55 AMG(163174) , ML550(163175)

* VW European cars

Ford Transit Diesel Filter Wrench

Description:

* Special designed to remove and install fuel filter on Ford Transit 2.2L TDCi engine.

* Application: Ford Transit 2.2L TDCi engine.

CHIH TAI Y&S CO., LTD.

CH0812218

Fuel Filter Lid Wrench(3/8”dr. 8Ribs, 109mm)

Description:

E-mail: chihtai@ms16.hinet.net

CH0915317

CH0812245

CH1308298

* Used to avoid damage to components when working on fuel system.

* Size: Dr. 3/8", 8RIBS, 109mm

* For removing and installing fuel filters.

* Application: PEUGOET, CITROEN, RENAULT.

Radiator Cap Wrench

Description:

* Use to remove stubborn radiator coolant reservoir cap.

* Present BMW vehicle 2006.

Fuel Tank Lid Remover(BMW, Land Rover)

Description:

* Used to remove the fuel tank lid

* Used with 1/2”Dr. tool or 21 mm wrench.

Application:

* BMW and Mini Cooper Model:1988-2011 E31,E34,E36,E38,E39,E46,E53,E60,E63,E64,E65,E83,E85,E90, R50,R52,R53,R55,R56,R57

* Land Rover Model:LT-Discovery 2, LP-Range Rover,LNFreelander,LM-New Range Rover,LJ-Discovery series 1, LD-Defender 07MY.

* BENZ E(W211/W203),BENZ ML230(163136),ML320(163154),ML350(163157),ML430(163172), ML55 AMG(163174),ML550(163175).

* VW, AUDI European cars.

* BM number:161028

* LM number:310-118

Fuel Tank Sender Removal Tool

Description:

* Fuel Tank Sender Removal Tool W202.

* For removal and refit of the in-tank fuel senders.

E-mail: chihtai@ms16.hinet.net

CH200882 2Pcs Fuel Filter Removal Tool

Description:

* With almost 200 vehicle application including Chevrolet, Citroen, Fiat, Peugeot, Saab, Suzuki and Vauxhall.

* This tool is an investment that should find a more in every workshop.

* Replacing the fuel filter element using this tool not only saves time and therefore money, but crucially also dramatically reduces the chance of damaging the expensive housing assembly which would also render the vehicle undriveable.

CH1214378

Fuel Filter Cover Mounting Tool (for VAG)

Description:

* Designed to press the fuel filter cover evenly and in a torsionfree manner into the seal seat in the fuel filter housing.

Application:

* New design for both of “UFI” and “MANN” fuel filter housing.

* VW, Audi, Skoda and Seat diesel vehicles.

* Also suitable for Multicar M27/M28.

CH1214376-2

Description:

* Used to loosen stubborn caps on radiators and reservoirs.

* Especially suitable for use in tight spaces.

* Size: 3/8”drive.

Radiator Cap Wrench(Ford/Land Rover/Volvo/Mazda)

E-mail: chihtai@ms16.hinet.net

CH0312180-F Diesel Filter Wrench (Ford Transit)

Description:

* Works on 2015 to current 150, 250, and 350 models.

* The tool is notched to match the canister design to help eliminate slipping and damage to the canister.

* To remove the canister housing, slip the tool over the canister and turn the wrench to the unlock position on the canister.

* To install, apply upward pressure and turn the canister housing to the locked position.

* The tool also has a 3/8" square drive to provide extra leverage.

CH0312180-I Oil Filter Cap Wrench (Dodge)

Description:

* Helps loosen stubborn oil filler caps by providing leverage.

* Can be used with 3/8square drive. Works great in hard-to-reach areas.

* For use on many Dodge Ram, Dakota and Durango as well as some Jeep Liberty, Grand Cherokee and Commander with threaded plastic oil filler caps.

CH1214376

Radiator Cap Wrench(BMW)

Description:

* Used to loosen stubborn caps on radiators and reservoirs.

* Especially suitable for use in tight spaces.

* Size: 3/8”drive.

* Works on BMW vehicles: E60, E61, E63, E64, E70, E71, E72, E81, E82, E84, E87, E88, E89, E90, E91, E92, E93, F01, f02, F03, F04, F06, F07, F10, F11, F12, F13, F15, F16, F18, F20, F21, F25, F26, F30, F31, F32, F33, F34, F35, F36, F80, F82, F83, F85, F86.

* OEM Ref.:17117639020/17117521071/17117639021/17137516004

* Can also apply with CH1214257-18 to release or lock the screw on the radiator of BMW vehicles.

CHIH TAI Y&S CO., LTD.

CH1214365

Fuel Tank Locking Ring Tool

Description:

E-mail: chihtai@ms16.hinet.net

* This tool is designed to remove and install the fuel tank locking ring.

* Suitable for Audi, BMW, Chevrolet, Chrysler, Fiat, Ford, GM, Hyundai, Jaguar, Kia, Land Rover, Mercedes, Nissan, Opel, Vauxhall, Volvo and VW vehicles, etc.

* Size: 1/2”dr. x 21mm

CH1214366

Fuel Tank Locking Ring Tool (Peugeot/ Citroen)

Description:

* This tool is designed to remove and install the fuel tank locking ring on Peugeot and Citroen vehicles.

* Size: 1/2”dr. x 21mm

CH1308258

Fuel Tank Lid Tool(Saab)

Description:

* Applicable: SAAB mode i900. Used to remove & install the plastic fuel tank lid.

CH1308259

Saab Fuel Tank Lid Remover and Installer

Description:

* Applicable: SAAB mode i900. Used to remove & install the plastic fuel tank lid.

* For range: Ø110-140mm. Application: Opel/Vauxhall and Saab passenger cars.

CHIH TAI Y&S CO., LTD.

CH210510-A

Fuel Tank Spanner (adjustable)

Description:

* Universal application.

E-mail: chihtai@ms16.hinet.net

* For removing and replacing the Plastic Retaining Ring on the sender Unit on Fuel Tanks.

* Tank Spanner size: dia.110-170 mm, drive 24 mm

CH210510-B

Fuel Tank Spanner (adjustable)

Description:

* Universal application.

* For removing and replacing the Plastic Retaining Ring on the sender Unit on Fuel Tanks.

* Tank Spanner size: dia.80-122 mm, drive 24 mm

CH210510-C

Fuel Tank Spanner (adjustable)

Description:

* Universal application.

* For removing and replacing the Plastic Retaining Ring on the sender Unit on Fuel Tanks.

* Tank Spanner size: dia.75-160 mm, drive 24 mm

CH210510-G

Fuel Tank Spanner (adjustable)

Description:

* Universal application of 24mm Driver.

* For removing and replacing the Plastic Retaining Ring on the sender Unit on Fuel Tanks.

* Application range: dia. 75-175 mm.

CHIH TAI Y&S CO., LTD.

CH210510-H

Fuel Tank Spanner (adjustable)

Description:

E-mail: chihtai@ms16.hinet.net

* Universal application of 24mm Driver.

* For removing and replacing the Plastic Retaining Ring on the sender Unit on Fuel Tanks.

* Application range: dia.: 80-175 mm.

CH210510-I Fuel Tank Spanner (adjustable)

Description:

* Universal application of 24mm Driver.

* For removing and replacing the Plastic Retaining Ring on the sender Unit on Fuel Tanks.

* Application range: dia.: 65-145 mm.

CH210510-J

Fuel Tank Spanner (adjustable)

Description:

* Universal application of 24mm Driver.

* For removing and replacing the Plastic Retaining Ring on the sender Unit on Fuel Tanks.

* Application range: dia.: 80-170 mm.

CH210510-K

Fuel Tank Spanner (adjustable)

Description:

* Universal application of 24mm Driver.

* For removing and replacing the Plastic Retaining Ring on the sender Unit on Fuel Tanks.

* Application range: dia.: 85-175 mm.

E-mail: chihtai@ms16.hinet.net

CH210510-E Fuel Tank Spanner Set (adjustable)

Description:

* Universal application of 24mm Driver.

* For removing and replacing the Plastic Retaining Ring on the sender Unit on Fuel Tanks.

* Include: 3 series of extension

* Application range: dia.75-160 mm, dia.80-122 mm, dia.110-170 mm.

CH210510-F

Fuel Tank Spanner Set (adjustable)

Description:

* Universal application of 24mm Driver.

* For removing and replacing the Plastic Retaining Ring on the sender Unit on Fuel Tanks.

* Include: 5 series of extension, that include for PSA and Renault models.

* Application range: 70-170mm

CH031273-A 2 in 1 Fuel Tank Lock Ring Kit

Description:

* A damage free method of removing & re-fitting collars.

* An innovative tool for the removal and fitting of fuel gauge sender collars.

* Tool easily removes and installs lock ring on the fuel tank when servicing the fuel pump or fuel sending unit.

* Operation range: dia. 90-170mm

* Channel design on body admits 2 interchangeable set of legs to regulate and retains the drive centered.

* Work on: 2004-newer Ford F-150 trucks, -2004 new Chrysler/Dodge mini-vans, PT Cruiser, Dakota, Durango, -2004newer Chevy trucks.

* The tool will not hang over the work area to avoid hitting other parts.

CHIH TAI Y&S CO., LTD.

CHIH TAI Y&S CO., LTD.

CH1308151

Fuel Pipe Pliers for Quick Coupling

Description:

E-mail: chihtai@ms16.hinet.net

* Pliers for unlocking quick-release connections on fuel lines where the unlocking segments can be reached from the side.

* Package: Bulk Advantages:

* No damage to quick release connections or clamps.

* No damage to fuel lines or hoses.

* Easy and quick separation of fuel lines.

* Suitable for Opel/Vauxhall, GM, Fiat, etc.

CH0915120

Fuel Line Pliers

Description:

* For Volkswagen/Audi group.

* Used on three ended hose clips which are fitted to: Audi/Seat/Skoda/VW fuel line clamps.

* Clamping range: 28-18mm

CH121492

Fuel Line Pliers

Description:

* Suitable for VW-Audi, Fiat, GM, Opel, Mercedes etc. e.g. Mercedes M-Class with Petrol engines.

* For removal and replacement of the connections on the in-line Fuel Filter. Required when replacing the Fuel Filter or during engine repairs.

* Removal of Connector:

。 Pull the connector backwards with the Pliers.

* Replacing the Connector: 。 Slide the connector forwards with the Pliers.

。 Length: 240 mm

CHIH TAI Y&S CO., LTD.

CH1214126-D

Fuel Line Pliers for Diesel Filter

Description:

E-mail: chihtai@ms16.hinet.net

* The pliers for releasing the quick coupling of JTD multi jet diesel filter on Fiat, Lancia, Alfa Romeo, Opel, Peugeot, Citroen, Ford and Suzuki.

CH1214231

Fuel Feed Pipe Pliers

Description:

* Application: Opel/Vauxhall, Fiat, GM, VW etc.

* For undoing quick release connections on fuel feed pipe lines.

CH0812352

Push to Fit Quick Connector Tool

Description:

* Designed for disconnecting push-to-fit quick connectors (such as SAE J2044) 2-button type which are widely found in fluid/vapor transfer system, including fuel line/EVAP system (petrol/diesel), SCR line (Adblue) system, cooling/heating system, and braking line system, etc.

* Multi-angle jaw design allows various approach to hard to reach/difficult access area.

CHIH TAI Y&S CO., LTD.

CH0915530-A Gerridae Quick Connector Disconnect Tool

Feature:

E-mail: chihtai@ms16.hinet.net

* One hand operation design, include small and large jaw for narrow space to disconnect button connectors.

* For fuel line, the gerridae quick connector disconnect tool especially for disconnects fuel line, EVAP line and DEF fitting with tabs that must be depressed to disengage.

* In the other one head, special design swivel jaws, as well as extra long jaw structure, for long and narrow space when your finger can not reach the connector.

* Most of vehicle used this type of connectors

CH081237-ZB A/C & Fuel Line Disconnect Tool

Description:

* Use to release spring like couplings on fuel and air conditioning lines

* Also use to release locking mechanism on all 4 size ranges

* Use on most Ford and Chrysler LH series vehicles

CH081237-ZS

Fuel Line Disconnect Tool

Description:

* This tool makes fuel filter replacement easy.

CH121476-A

Fuel Filter Key Ø108

Description:

* Suitable for Peugeot, Citroen, Renault e.g. with HDI diesel engines.

* The fuel filter key is required to remove and install the fuel filter cap when replacing the fuel filter cartridge.

* Drive: 3/8”

* Profile: Ø 108 mm, 46 Rillen

CH1214190

Diesel Fuel Filter Socket ( HDi engines)

Description:

* Specialist socket required for the removal of diesel fuel filter. * Fitted to 2.0, 2.2 HDi engines found in some Citroën,Fiat, Ford, Lancia, Land Rover, Mitsubishi, Peugeot and Volvo vehicles.

CH1214190-A

Diesel Fuel Filter Socket (Ford Transit)

Description:

* Designed to remove and install the fuel filter on Ford EcoBlue 2.0L TDCi diesel engine from 2016. * Size: 1/2”dr. x 32mm

Application: * Transit 2016~, Transit Custom 2016~, Transit Custom Kombi 2016~, Tourneo Custom 2016~

CH1214101

AdBlue Filter Socket ( Mercedes)

Description:

* Design to remove and install the AdBlue filter(Urea filter) housing cap. * Suitable for Mercedes commercial vehicles with BlueTec engines: Actros, Atego, Axor, Econic.

CHIH TAI Y&S CO., LTD.

CH1214420-Z Mazda Diesel Filter/Sensor Wrench Set

Description:

E-mail: chihtai@ms16.hinet.net

* This wrench set is designed to service the diesel filter/sensor on Mazda SKYACTIV-D2.2 (SH-VPTS & SH-VPTR) engine.

* 1/2”drive.

Application:

* Suitable for 2.2L diesel: CX-5, CX-8,Mazda 6(Atenza), Mazda 3 (Axela)

CH2008106

AdBlue Tank Cap Remover

Description:

* AdBlue® tank cap remover for removing the tank cap when stuck due to urea crystallisation or overtightening.

* Also allows correct tightening to ensure proper sealing of the system.

* AdBlue® tank cap remover for Peugeot and Citroën vehicles.

Application:

* Peugeot: 208, 301, 308, 308SW, 508, 508SW, 2008, Expert, Partner, Rifter, Traveller.

* Citroën: Berlingo, C3, C3 Picasso, C4 Cactus, C4 Picasso, C4 Grand Picasso, C5, DS3, DS3 Cabriolet, Jumpy.

CH1214383

Fuel Return Line Tool (VAG TDI-CR)

Description:

* Designed for professional removal/ Installation of the fuel return line push- fit connector (round type) at the injectors.

* Suitable for VW, Audi, Skoda, Seat 2.0, 2.7 and 3.0 TDI common rail diesel engine.

Application:

* VW: Eos, Golf V-VI, Jetta, Passat, Passat CC, Scirocco, Tiguan, Transporter T5, Phaeton

* Audi: A3, A4, A5, A6, A7, Q5

* Skoda: Yeti

* Seat: Exeo

* Engine codes: BMK, BPP, CAAA, CAAB, CAAC, CAAD, CAAE, CAGA, CAGB, CAGC, CBAA, CBAB, CBAC, CBDA, CBDB, CBDC, CDUD

E-mail: chihtai@ms16.hinet.net

CH1214166-C Disconnect Tool Set

Description:

* Works on air conditioning line, fuel line, etc.

* Easily disconnect quick connect couplings on many vehicles.

* Easily to identify the difference sizes from the color coded.

* Content size: 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”

CH1214166

7PC A/C Fuel Line Disconnect Set

Description:

* Includes seven tools for disconnecting spring couplings on Ford, GM, and Chrysler air conditioning lines.

* Also works on fuel lines and can be used as push lock connectors on radiator and transmission lines.

* Size include: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8".

CH1214179-Z3

Fuel Line Disconnect Tool Set (diesel)

Description:

* The tool set for disconnecting quick-connect couplings on fuel lines.

* Quick fuel filters replacement.

* Suitable for VAG, Fiat, Jeep, Opel, Ford, Chrysler and Volvo.

CH121420-PT6

Master Deluxe Line Disconnect Tool Set

Description:

* For separating Quick Disconnect fittings on fuel and cooler lines.

* Unique offset design allows for access in confined or obstructed areas.

* Easy, one-handed operation.

* Material: POM Content:

* CH121420-PT6-1(Dark Grey) Size: 1/2", Deluxe Line Disconnect Tool, for most 1/2" lines.

* CH121420-PT6-2(Blue) Size: 5/8", Deluxe Line Disconnect Tool, for heater, A/C lines and more.

* CH121420-PT6- 3(Black) Size: 3/4", Deluxe Line Disconnect Tool, for heater, A/C lines and more.

* CH121420-PT6-4(Silver) Size: 7/8", Deluxe Line Disconnect Tool, for heater, A/C lines and more.

* CH121420-PT6-5(Red) Size: 5/16", Deluxe Line Disconnect Tool, for fuel & cooler lines.

* CH121420-PT6-6(Gold) Size: 3/8", Deluxe Line Disconnect Tool, for fuel & cooler lines.

CHIH TAI Y&S CO., LTD.

CH121421-A Master Deluxe Line Disconnect Tool Set

Description:

E-mail: chihtai@ms16.hinet.net

* For separating Quick Disconnect fittings on fuel and cooler lines.

* Unique offset design allows for access in confined or obstructed areas.

* Easy, one-handed operation.

* Anodized aluminum construction. Content:

* CH121421A-1(Dark Grey) Size: 1/2", Deluxe Line Disconnect Tool, for most 1/2" lines.

* CH121421A-2(Blue) Size: 5/8", Deluxe Line Disconnect Tool, for heater, A/C lines and more.

* CH121421A -3(Black) Size: 3/4", Deluxe Line Disconnect Tool, for heater, A/C lines and more.

* CH121421A -4(Silver) Size: 7/8", Deluxe Line Disconnect Tool, for heater, A/C lines and more.

* CH121421A -5(Red) Size: 5/16", Deluxe Line Disconnect Tool, for fuel & cooler lines.

* CH121421A -6(Gold) Size: 3/8", Deluxe Line Disconnect Tool, for fuel & cooler lines.

* CH121421A -7(Green) Size: 3/8", Deluxe GM Cooler Line Disconnect Tool, for transmission cooler lines.

* CH121421A -8(Purple) Size: 3/8", Deluxe Cooler Line Disconnect Tool, for cooler lines on most Ford vehicles and on 2003 to current Cadillac CTS.

CH1308199-C Ford Fuel Line Disconnect Tool

Description:

* Size: 5/16" x 3/8"

* Both Ends Required Due to Limited Clearance Between Fuel Line Connecter End and Fuel Rail

* Application: Transit 20L, 35 GTDI, 62L Boss Engines

CH1214410-B Fuel Line Disconnect Tool Set

Description:

* Use the disconnect tool to squeeze the release tabs and release the quickconnect fittings.

* Suitable for GM, Poel, Holden, Ford, Chrysler, Mitsubishi.

* Fit the various normal quick connector size: 1/4”(black), 5/16”(red), 3/8”(blue)

CHIH TAI Y&S CO., LTD.

CH121408

CH050340

E-mail: chihtai@ms16.hinet.net

22PC. Fuel & Air Conditioning Line Disconnect Set

Description:

* 6pcs. Fuel & Air Conditioning Line Disconnect Set- 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"

* 1pc Ford A/C spring lock coupling tool,red(3/8")

* 1pcFord A/C spring lock coupling tool,blue(1/2")

* 1pc Ford A/C spring lock coupling tool,black(5/8")

* 1pc Ford A/C spring lock coupling tool,beige(3/4")

* 1pc Fuel Line Disconnect Tool

* 1pc Ford Oil Cooler Line Disconnect Tool

* 1pc Ford Fuel Line Coupling Tool

* 1pc Ford/GM Quick Disconnected Tool

* 7PC A/C, Fuel Line Disconnect Set

* 1pc Rubber Band

Auto Flexing Line Sockets

Description:

* Auto-flexing function can tight the nut without losing torque.

* Quick change for 5 sizes: 11,13,14,15& 17mm

* Unique flexible sockets can be easily reach outward fuel line nut and adjusted to use in narrow space.

* Max. torque: 30Nm

CH1214129

Universal Steel Line Stopper

Description:

* Suitable for clamping and sealing steel line on braking system, cooling system, fuel line, A/C Line,etc.

* Provides an effective seal to steel lines when disconnected.

* Prevents fluid loss and contamination of the work area.

* 5/16",3/8",1/2" and Banjo(10.4mm&18mm)

CH091557

Vacuum Hose Identifiers

Description:

* This identifiers are commonly used when tuning the engine or working on the carburetor.

* Identifiers can also be used to plug fuel lines while changing.

* Contents: 12pcs-1/8”, 18pcs-3/16-1/4”, 12pcs-5/16"-3/8" ,6pcs6"1/2"

E-mail: chihtai@ms16.hinet.net

CH2008100 8pcs Oil Stopper Set

Description:

* Special shape design for the stop the oil fuel hose and pipe when remove the adaptor.

* Special design for three size:5, 6.3, 8mm

* Anti-slip design for holding

* Angle finder design for different size.

* For tube size: 5/16”, 3/8”, 1/2”

CH120829-N 8Pcs Quick Fluid Stopper Set

Description:

* Quickly stop fluid when disconnect fuel lines, A/C lines, transmission cooler lines, and brake lines.

* Suitable for fuel lines with Banjo type, and 5/16”, 3/8”, 1/2” sizes.

CH120829-A 12Pcs Quick Fluid Stopper Set

Description:

* Quickly stop fluid when disconnect fuel lines, A/C lines, transmission cooler lines, and brake lines, for Banjo type and 5/16” size.

* Long reach hose pinching tool for pinching small hoses fast and effortless

* Yellow plugs are available in 3/16”, 1/4” and 5/16” sizes.

* Tube separator for helping disconnect steel type fuel lines.

CH0812256 Fuel Line Release Tool

Description:

* Used for opening quick acting couplings of fuel lines in fuel tank.

CHIH TAI Y&S CO., LTD.

CH120895 Fuel System Cleaning Tool Set

Description:

E-mail: chihtai@ms16.hinet.net

* For introducing cleaning agent into the engine without cleaner being diluted in fuel tank.

* Quick fuel air bleeding after the fuel system been disturbed.

* Closing type adapters work as seamless fuel stoppers when fuel lines are disconnected.

* Provided with various adapters for the most common vehicles and models

* Includes a 12.5L container suitable for works requiring large capacity.

CH1308302

Mercedes Benz A/C Low Side Coupler Removal Tool

Description:

* Special designed to remove the low side coupler.

* Applicable: BENZ W221, W211, W204, W219.

* Material: Nylon

CH0915427

Ford Fuel Line Disconnect Tool

Description:

* For Ford 6.0L engine

* Use to disconnect the high pressure oil rail

* Supply line from the fuel rail when removing fuel injectors.

E-mail: chihtai@ms16.hinet.net

Cooling/AC System

CH120886-2

8pcs Coolant Refilling Funnel Set

Description:

* Set for refilling coolant and air bleeding

* Special funnel design features its spill-free function when disconnecting funnel from radiator adapter

* Transparent funnel chamber helps display air bubbles remaining in the coolant

* Includes three steel adapters and one universal adapter with three rubber rings

* Large funnel (1.6L / 54 Oz capacity) suitable for heavy duty and large vehicles

Instruction:

1. Drain old coolant by removing the drain plug underneath the radiator.

2. Choose a suitable adapter and connect the adapter onto radiator filler neck or recovery tank (Fig. 1 and 2)

Note: When using the universal radiator adapter with golden rotor, rubber rings can be connected to the rubber on the adapter for fitting different sizes.

3. Connect the funnel onto the adapter and pour new coolant into the radiator or recovery tank (Fig 3).

4. Turn on the engine, and turn on the heater to maximum.

5. Run at idle for air bleeding (about 20-30 minutes). Air bubbles may be observed through transparent funnel chamber (Fig. 4).

6.Disconnected funnel from radiator adapter without spilling(Fig. 5).

A. When the funnel is connected to a radiator adapter, the oneway valve is pushed outward, allowing coolant to pass freely.

B. When the funnel is disconnected from a radiator adapter, the one-way valve shuts off, prevent coolant from flowing out.

CHIH TAI Y&S CO., LTD.

CH120897

E-mail: chihtai@ms16.hinet.net

Coolant Refilling Funnel Set with Extension Pipes

Feature:

* For anti-spill coolant refilling and air bleeding

* Includes 4 extension pipes for confined space or tricky angles

* Transparent lower chamber displays the amount of air bubbles remaining in the radiator

* Includes adapters with nylon covers to reduce heat transfer resulted from air bleeding

* Special design of connector to adapters provides anti-spill feature

* Funnel capacity: 1,600 ml / 54.1 Oz. suitable for passenger cars, trucks and heavy duty vehicles

CH0807136-A

CH1208115

Fixed and Flexible Plastic Oil Funnel

Feature:

* Dual use designed with fixed hose or installing flexible hose at the front end.

* Fixed hose length: 275mm

* Flexible hose length: 100-180mm

* Funnel inner size: dia.10mm

* Total length after connecting two hoses: 360-440mm.

Vacuum Purge and Refill Coolant Pressure Tester Set

Feature:

* Pressure pump to test leaks in cooling system

* Provided with 3 twist-on type and 16 threaded type adapters, covering almost all types of car makes and models on the market

* Vacuum-type coolant refill tool has large internal passages to allow coolant to be refilled fast

* Radiator cap test tubes (black and blue) to test if the radiator cap from the car has leaks

* Coolant hose and drain hose are made of cold-resistant material

CHIH TAI Y&S CO., LTD.

CH1308200

Coolant Filling Kit

Description:

CH152010

CH1308270

CH0915115

E-mail: chihtai@ms16.hinet.net

* Eliminates trapped air pockets which usually cause erratic cooling system and heater performance.

* Controls unattended filling of the cooling system.

* Eliminates squeaky belts caused by coolant overflow.

* Fits most cars and light trucks.

Engine Cooling System Leakage Tester

Description:

* Designed to check cooling system for leaks on common cars.

* Tester set includes air pressure regulator with gauge different diameter connecting tube (1/4"、5/16") and 'hose clamp pliers (8"、10"、12").

* Easy to use and quickly find leaks in cooling system.

Water Pump Pulley Locking Tool(VW,Audi)

Description:

* Suitable for holding the water pump pulley on VAG vehicles fitted with air conditioning.

* Applications VAG-vehicles with air conditioning.

* Material:Iron

Water Pump Holder (For GM ECOTEC)

Description:

* Holds the timing chain and gear in place while removing or installing water pump on ECOTEC engines.

CH200858

3Pcs Water Pump Tool Kit

Feature:

* This set allows the crankshaft rotation on TDC-position and the crankshaft counterhold,during the loosening of the crankshaft center screw or of the water pump toothed wheel fastening screw.

* It is also suitable for removal or extraction of the water pump toothed wheel and water pump itself.

* For VW T5,Touareg 2.5 L 5-cylinder TDI engines

CH091539

Water Pump Holding Tool for GM

Description:

CH091544

E-mail: chihtai@ms16.hinet.net

* Simply remove access plate from front cover and install the tool to holding timing chain in place.

* Use for 2002-2008 GM 2.2L & 2.4L ECOTECH engine in CHEV ROLET old mobile, PONTIAC AND SATURN platforms.

Application GE ECO TECH

* 2.2 ENGINE CODE F

* 2002-2005 CHEV CAVALIER * 2005-2008 CHEV COBALT * 2003-2008 CHEV MALIBU

* 2002-2004 OLDS ALERO

* 2002-2005 PONTIAC SUNFIRE * 2007-2008 PONTIAC G5

* 2002-2005 PONTIAC GRAND AM * 2002-2006 SATURN VUE * 2003-2007 SATURN LON * 2000-2005 SATURN L SERIES

* 2.4 ENGINE CODE B * 2005-2008 CHEV COBALT * 2005-2007 CHEV HHR * 2004-2008 CHEV MALIBU

* 2006-2008 PONTIAC G6 * 2006-2007 PONTIAC PURSUIT * 2006-2008 PONTIAC SOLSTICE

* 2007-2008 SATURN AURA * 2006-2007 SATURN LON * 2007-2008 SATURN SKY

Cadillac/AURORA Water Pump R&R Socket

Description:

* This unique tool has been developed to remove and install the water pump on CADILLAC NORTHSTAR4.6 LITER V-8 ENGINES FROM 1993 AND LATER ALSO OLDSMOBILE AURORA 4.0 LITER V-8 ENGINES 1995 AND LATER.

CHIH TAI Y&S CO., LTD.

CH091546

Water Sensor Socket

Description:

E-mail: chihtai@ms16.hinet.net

CH0911122

CH0812251

CH1214345

* GMC 6.6L duramax diesel engine application including: 。 2001 TO PRESENT CHEVY/GMC PICK UPS 。 2003 TO PRESENT CHEVY/GMC MEDIUM DUTY TRUCKS

* Remove or install water sensor on fuel filter for GM 6.6L DURAMAX diesel engines.

The Water Pump Remover/ Installer

Description:

* The tool of the removal and installation for maintenance and replacement.

* Applicable: Ford 1,25; 1,4; 1,6 L 16V; Puma 1,4; 1,6; 1,7 L 16V; Mazda 121 1,25 L 16V.

* Content: camshaft pulley holding tool, camshaft pulley removal device, camshaft alignment plate tool.

Water Pump Wrench(GM 1.6L, 41mm)

Description:

* Use with 3/8' square drive and short extension to easily adjust and hold the water pump when replacing or adjusting timing belt.

* Stubby tool design allows access to timing belt sprocket without interference from vehicle frame.

* Works on 1.6L engines in 2004-current Chevrolet Aveo excluding 2009 with variable timing engine and 1999-2002 Daewoo Lanos.

Hex Valve Core Tool (1/4”)

Description:

* For torque-controlled tightening with a torque screwdriver / wrench.

CH0911141

BMW –Pulley Holder

Description:

* Allows the technician to hold the water pump pulley in place while loosening the radiator fan.

* BMW engine models M10, M20 & M30 and late cars.

CHIH TAI Y&S CO., LTD.

CH121440 Master Freeze Plug Installation Tool Kit

Description:

E-mail: chihtai@ms16.hinet.net

* Complete kit including straight and formed driver, all adapters and coupling nut, plug exclusive pneumatic adapter.

* All parts quality machined and plated.

CH0812195 Air Condition System Leakage Test Set

Description:

* Suitable for condenser leakage test, evaporator leakage test, refrigerant hose leakage test and air condition compressor leakage test.

* Adaptor for diameter of fitting and hose to 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 7/8”.

CH0812171

Toyota Diesel Fuel Wrench Socket

Description:

*∮12.8mm x HEX 17mm.

Application range:

* Toyota fluid reservoir on condenser

CH0812260

Air Conditioner Belt Tool (Ford)

Description:

* The device is intended for installation of the air conditioning belt.

* Special kit helps quickly and without damage to the air conditioner install belt.

Application:

* MAZDA 3 / MAZDA 5 / FORD FOCUS.

* Use of the engine:1.6L Duratec-16V Ti-VCT (Sigma), 1.6L Duratec-16V Ti-VCT (Sigma), 2.0L Duratec-HE (MI4), 2.5L Duratec (VI5), 2.5L Duratec-ST (VI5), 2.5L Duratec-VE (VI5)

* OEM No: 303-1288.

E-mail: chihtai@ms16.hinet.net

CH210587

& CH210587-2 R134a and R12 Side Can Tap

Description:

* Item No.:CH210587, slides over R12 cans for quick and easy charging

* Item No.:CH210587-2, Slides over R134a cans for quick and easy charging

CH200833

Pretension Spring Clip Releaser

Description:

* Used to release pretensioned spring-type clips when fitting coolant hoses.

* Can be used in tight conditions thanks to the versatile attachment points on the tool

* The application is described in the relevant workshop manual for VAG -Ibiza 2008 -Ibiza 2018 -1,4LTFSI - petrol -1,8L TFSI – petrol -1.0 TFSI 4V 3cil - petrol

CH0312200

CH1214315

A/C Clamp Remover

Description:

* Fits for both high and low edge clamps.

* Suitable chamfer opens clamps.

* Used for dismantling line clamps found on Toyota Tacoma (20152018).

A/C Couplings Release Tool (VAG Group)

Description:

* Releasing the quick release connectors on the A/C lines.

* Suitable for VAG group (VW, Audi, Skoda, Seat): -Audi: A3 2004>, A4 2001>, 2008>, A5 2008>, Q5 2008>, TT 2007> -Seat: Ibiza/Cordoba 93, Ibiza/Cordoba 99, Ibiza 02/Cordoba 03, Ibiza 2008, Leon 2006, Leon 2009, Toledo/Leon 99, Toledo 2005, Alhambra, Alhambra 2011, Altea 2005, Altea 2009, Altea XL 2007, Altea XL 2009, AlteaFreetrack 2007, AlteaFreetrack 2009, Exeo 2009, Arosa, Inca -Prosche: Macan

* OEM Ref.: T40149, T40149/50

CHIH TAI Y&S CO., LTD.

Fan Clutch Wrench

CH081224

GM Fan Clutch Holder

Description:

E-mail: chihtai@ms16.hinet.net

CH0911140-32

CH0911140-36

CH0911143

CH0911144

* Use to loosen and tighten the fan clutch on 1996 and later GM trucks and vans Unique design works with both 10mm and 13mm pulley bolts.

Viscous Fan Nut Wrench (32mm)

Description:

* Removes lock nuts on thermo-Viscous fans found on FORD BNW etc.

Viscous Fan Nut Wrench (36mm)

Description:

* Removes lock nuts on thermo-Viscous fans found on FORD BNW…etc.

BENZ-Fan Belt Service Wrench

Description:

* Special designed 3 holes to hold the stud on fan clutch assembly found on Mercedes Benz vehicles to allow release of lock nut.

* Slim handle for tight space operation.

BENZ-Fan Clutch Wrench

Description:

* Replaces fan clutch assembly on Mercedes Benz vehicles.

* Slim shaft handles let you easily work in light space.

E-mail: chihtai@ms16.hinet.net

CH0911142 BENZ-Holding Tool

Description:

* To allow removal of the visco-coupling on the cooling fan.

* Apply on Mercedes engine M103 , M104.

CH121452-A

Fan Clutch Removing/Installing Set

Description:

* Removing fan clutches to replace Water pumps or for other engine service doesn't have to be a headache.

* Five wrenches and five holding tools included give you broad coverage of GM, Ford and Chrysler vehicles that use a fan clutch.

* Fit into close quarters where conventional wrenches just won't get the job done. Heat treated to with stand high torque needed to remove some fan clutches.

* Most wrenches feature a 1/2" drive square for attaching a break bar to apply extra torque.

* 2-1/4" (57mm) Fan pulley holding tool

* 2-3/8" (60mm) Fan clutch bolt holding tool

* 2-1/8" (54mm) Fan clutch pulley holding tool

* 3/1/4" (82mm) Fan pulley holding tool

* 3" (76mm) Fan clutch pulley holding tool

* 2-13/16" (72mm) Fan hub wrench

* 1-7/16" (36mm) Fan clutch nut wrench

* 1-7/16" (36mm) Fan clutch wrench

* 1-9/16" (39mm) Fan clutch wrench

* 1-7/8" (47mm) Left hand clutch nut wrench

CH091507-A

Universal Pulley Holder & Fan Clutch Set

Description:

* This set is designed to removes & installs fan clutch & hold the camshaft pulley.

* Use for most of the cars.

* Contents with different tap to fit any cars & pin width can adjust.

* Can adjust different width from 40~220mm.

* Size available: Φ6~10mm,Φ8~11mm, Φ10~12mm,Φ11~16mm.

CHIH TAI Y&S CO., LTD.

Turbo Tool

CH0915244

CH121472-A

CH121477

E-mail: chihtai@ms16.hinet.net

Turbo Boost Hose Clip Plier (VOLKSWAGEN/AUDI/SKODA)

Description:

* For use on turbo boost hose clips fitted to : VOLKSWAGEN PASSAT 2.0 TDI(05)/TOURAN/GOLF V/AUDI A3/SKODA OCTAVIA.

* For used on turbo boost hose clips fitted.

* Essential tool for these specialized clips.

* With locking function.

Tube Blocking Pliers

Description:

* For releasing and re-fitting the re-usable hose clips types CLIC and CLIC-R.

* Suitable for VW-Audi, Citroën, Mercedes, Opel/Vauxhall, Peugeot, etc.

The Special Wrench For Turbo

Description:

* Special wrench for screwing on the turbo-charger in diesel engines of VW / AUDI; new model, short type, from now on very convenient assembling and disassembling

* For screw underneath the turbo-charger

* For:VW / AUDI

* Drive: 3/8"

* Size：12 mm x 12PT

CHIH TAI Y&S CO., LTD.

Spark Plug Tool

CH0915108

Spark Plug Cable Puller(For VW AUDI)

Description:

E-mail: chihtai@ms16.hinet.net

* Removing and installing spark plug connectors.

* Spark plug socket remover for new beetle and cars with 2.0 engine AZJ. LOCKING, VW GOLF IV & V WITH 1.6 EINGINE, VW AUDI, BORA, MERCEDES, SMART…etc.

* Length: 264mm

* Material: Stainless steel

CH0915109

Spark Plug Cable Remover Tool

Description:

* For metal spark plug caps.

* To release and detach plug-leads from inaccessible locations, such as VW-Audi, Mercedes, Smart, etc…

CH0915109-A

Spark

Plug Cable Remover Tool

Description:

* For metal spark plug caps.

* To release and detach plug-leads from inaccessible locations, such as VW-Audi, Mercedes, Smart, etc…

CH1214222-17

Spark Plug Boot Puller Wrench

Description:

* Application: Benz V6 Engine.

* Size: 17mm

CH091547

Spark Plug Chaser

Description:

E-mail: chihtai@ms16.hinet.net

CH0812259

CH1214230

CH0812139

* Narrow profile and long length allows access to spark plug holes in confined spaces.

* Fits spark plug holes with limited access.

* Use with a 3/8” ratchet or extension.

* Size: M14 x 1.25

Spark Plug Chaser

Description:

* Cleans Threads in Oxygen Sensor Holes.

* Use with 3/4" hex socket or 3/8" square drive.

* Size: M18x1.5 Also works on M18x1.5 spark plug threads.

Spark Plug Pullers

Description:

* CH1214230-A, 。

For installing and removing ignition coils with power stage on VW Polo, Golf 1.4, 1.6L, Caddy 1.4L, Bora1.4, 1.6L, Passat, Touran 1.6L, Phaeton , Transporter T4.

* CH1214230-B 。

For removing and installing ignition coils with power stage of injection engines on 5 and 6 cyl. VW Golf, Bora, 4 and 5 cyl. VW Passat, 6 cyl. VW Sharan, Touareg, Phaeton.

* CH1214230-C 。

For removing and installing ignition coils with power stage of injection engines on VW 8 and 12 cyl.

* CH1214230-D 。

For removing and installing ignition coils with power stage of injection engines on VW 8 and 12 cyl.

Series Magnetic Spark Plug Socket

Description:

* Item No.:CH0812139-A, size: 12PT x 14mm x 3/8”dr., length:64L

* Item No.:CH0812139-B, size: 12PT x 16mm x 3/8”dr., length:65L

* Item No.:CH0812139-C, size: 12PT x 21mm x 3/8”dr., length:65L

* Item No.:CH0812139-D, size: 12PT x 18mm x 3/8”dr., length:65L

* Item No.:CH0812139-E, size: 12PT x 17mm x 3/8”dr., length:65L

CHIH TAI Y&S CO., LTD.

E-mail: chihtai@ms16.hinet.net

CH040709-16, CH040709-21 Flexible Spark Plug Socket w/ T handle

Description:

* SIZE: CH040709-16, 3/8"x16mmx15"L CH040709-21, 3/8"x21mmx15"L

CH040710-16,CH040710-21

Description:

* SIZE: CH040710-16, 3/8"x16mmx450mmL CH040710-21, 3/8"x21mmx450mmL

CH040711-16,

Description:

* SIZE: CH040711-16, 3/8"x16mmx8"L CH040711-21, 3/8"x21mmx8"L CH171839-3806

CH0812139-L Series Magnetic Spark Plug Socket

Description:

* Item No.:CH0812139-LA, size: 12PT x 14mm x 3/8”dr., length:250L

* Item No.:CH0812139-LB, size: 12PT x 9/16”x 3/8”dr., length:250L

* Item No.:CH0812139-LC, size: 12PT x 5/8”x 3/8”dr., length:250L

* Item No.:CH0812139-LD, size: 12PT x 16mm x 3/8”dr., length:250L

* Item No.:CH0812139-LE, size: 12PT x 18mm x 3/8”dr., length:250L

* Item No.:CH0812139-LF, size: 12PT x 19mm x 3/8”dr., length:250L

* Item No.:CH0812139-LG, size: 12PT x 21mm x 3/8”dr., length:250L

* Item No.:CH0812139-LH, size: 12PT x 13/16”x 3/8”dr., length:250L

* Item No.:CH0812139-LI, size: 12PT x 17mm x 3/8”dr., length:250L

CH121438-SET Internal Spark Plug Rethread Tool

Description:

* The tool uses the better threads at the base of the spark plug port and greatly reduces the chance of debris from falling into the cylinder.

* Cleans and rethreads sparkplug ports from the inside out.

* Uses the good threads at the base of the port.

* Reduced dirt and metal from being driven into the cylinder head.

* Use light grease on the end to trap filings and keep tool easy to use.

* Length of 260mm(10") allows for deep well plugs.

Content:

* CH121438-SET-A, 12 mm x 1.25P x 260L Internal Spark Plug Rethread Tool

* CH121438-SET-B ,14 mm x 1.25 P x260L Internal Spark Plug Rethread Tool

* CH121438-SET-C ,18 mm x 1.5P Spark Plug Rethread Tool

* CH121438-SET-D, 08 mm x 1.0P Internal Spark Plug Rethread Tool

* CH121438-SET-E, 10 mm x 1.0P Internal Spark Plug Rethread Tool

CH121461-C

Description:

CH121461-C1

11mm(7/16") long

CH121461-C3 Insert - 16mm(5/8") long

CH121461-C4 Insert - 19mm(3/4") long

CH0915215-D 12Pcs Axle Spindle Rethreading Set

Description:

* Thread restoring set for proper repair or renewal of damaged threads in stub axle/spindles on most vehicles.

* Use with a socket or wrench, not for use with impact wrench or power tool.

Contents:

* 1PC 3/4"-16 re-threading die * 1PC 3/4"-20 re-threading die

* 1PC 13/16"-20 re-threading die

* 1PC27/32" re-threading die

* 1PC M16*4 re-threading die

* 1PC M16*1.5 re-threading die

* 1PC M20*1 re-threading die

* 1PC M20*1.5 re-threading die

* 1PC M22*1.5 re-threading die

* 1PC M24*1.5 re-threading die

* 1PC M24*2 re-threading die * 1PC M27*2 re-threading die

CH0312196

Adjustable Spark Plug Wire Puller

Description:

* Plastic handle grips help to avoid shock.

* Plier jaws adjust to five different places allowing easier repair spark plug boots.

* Specially shaped, cushioned jaws grip the boot straight on or from the side.

CH050330

Glow Plug Extraction Kit

Description:

* Specialist kit for the extraction of glow plug electrode terminals in the event of breakage or seizure. Allows plug extraction without time consuming and expensive cylinder head removal.

* Suitable for M10, M9, M8 terminals found on most vehicles.

* Size: M10x1 - M10x1.25 - M9x1 - M8x1

CH130847

Damaged Glow Plug Removal & Cleaning Tool Set

Description:

* Removing damaged/broken glow plugs from cylinder heads.

* Suitable for glow plug thread M8 X1.0mm

* Including all required adaptors, centering and cleaning tools to safety remove the glow plug without damaging the engine

CHIH TAI Y&S CO., LTD.

CH200887

Glow Plug Removal and Puller Set M10 x

1.0

Description:

CH200888

CH1308197

CH1308233

E-mail: chihtai@ms16.hinet.net

* Drilling and extracting tool set for broken off CDI glow plugs with thread M10 x 1,during disassembly of extremely seized glow plugs the drive hexagon can often be sheared off.

* While still attached to the glow plug body the central contact of the glow plug prevent the drive hexagonal from being removed.

* Using this tool set in a few steps the central contact is removed, the glow plug thread is drilled and the glow plug body is pulled out of the cylinder head.

Glow Plug Removal Set -M9 x

1.0

Description:

* Design for removing M9 x 1.0 glow plug

27Pcs Glow Plug Tool Set

Description:

* Designed for removal of damaged/broken glow plugs from cylinder heads.

* Suitable for glow plug with a M8, M9, M10 thread.

* Set includes all required adaptors, centering and cleaning tools to safety remove the glow plug without damaging the engine.

Glow Plug Tool Set

Description:

* Designed for removal of damaged/broken glow plugs from cylinder heads.

* Suitable for glow plug thread M10 x 1.0mm on VW-Audi V6 RDI engines, 2.5L(AFB,AKE,AKN,AYM,BAU,BCZ, BDG,BDH,BFC), 2.7L(BPP,BSG),and 3.0L(ASB, BKN, BKS,BMK, BNG, BUN, BUG)

* Set includes all required adaptors, centering and cleaning tools to safety remove the glow plug without damaging the engine

* TAP dimensions: 1/4”x20 UNC thread, M10X1.0mm thread, M12 x1.0mm thread.

E-mail: chihtai@ms16.hinet.net

CH200889 Glow Plug Removal Puller Set

CH1308234-B

Description:

* Design to pull out the broken head glow plug on the engine.

* For Mercedes CDI engine OM 611,612,613,646,647 and 648 etc.

* Size: M10 x 1.0

Reamer for Glow Plug

Description:

* To ream out and clean the bore between the glow plug and combustion chambers.

* Drive: 10mm Hex

* Glow plug: 7mm

Application:

* Mercedes 4 valve engines, OM604, OM605, OM606 with glow plug threads size M12 X1.25

CH1308234-C Reamer for Glow Plug

Description:

* To ream out and clean the bore between the glow plug and combustion chambers.

* Drive: 10mm Hex

* Glow plug: 6mm

Application:

* Mercedes CDI-engines 4, 5 &6 cylinder OM 611, 612, 613 with glow plug threads M10 x1

CH1308236

Glow Plug Puller & Reamer Set with 3pcs Glow/Spark Sockets

Description:

* For removal and maintenance of glow plugs in most popular diesel engines.

* Comprise three glow plug sockets, glow plug removal tool and two reamers for the removal of accumulated carbon in the glow plug chamber.

Content:

* 3pcs 6 point glow plug removal socket with 180 degree flexible head, size: 8, 9, and 10mm. 80L

* Glow plug removal tool with collet

* 2pcs glow plug reaming tools: M10 and M12 threads.

E-mail: chihtai@ms16.hinet.net

CH1308236-2 9Pcs Pre-Heater Plug Puller Set

Description:

* The glow plug sockets have a universal joint for easy replacement and removal of popular sized glow plugs.

* The pre-heater plug pullers are used to ream out and clean the bore between the glow plug and combustion chambers.

Content:

* 6Pcs 3/8”dr. glow plug socket: 8, 9, 10, 12, 14, 16mm (160L)

* 3pcs pre-heater plug puller

CH0915428

Ford 6.0L Glow Plug Remover

Description:

* Safely remove and install the glow plug harness on 2004-2009 Ford 6.0L Diesel engines.

CH1214371-B

Glow Plug Connector Removal Pliers (Angle type)

Description:

* For removing the sheathed glow plug connector.

* Suitable for Opel/Vauxhall 1.7L diesel

* OEM Ref. EN-48558

CH1308144

Pneumatic Adapter for Glow Plug Holes

Description:

* Ideal for boring in the glow plug bores.

* The injection of air prevents contamination building up in the combustion chamber.

* Air supply can be set with lever.

Available Size:

* CH1308144-A, size:M8 x 1.0, for Citroen, Fiat, Ford, Lancia, Opel, Mercedes, Suzuki, Volvo, etc.

* CH1308144-B, size:M10 x 1.0, for BMW, Chrysler, Opel, Mercedes, Nissan, Renault, etc.

* CH1308144-C, size: M10 x 1.25, for Toyota, Lexus, etc.

CHIH TAI Y&S CO., LTD.

CH200885 33Pcs Glow Plug Thread Repair Set PAT.

E-mail: chihtai@ms16.hinet.net

Description:

* Design to repair the thread for the glow plug threads.

Contents:

* Tap size: M8 x 1.0, M10 x 1.0, M10x1.25, M12 x 1.0, M12x1.25, M14 x 1.25

* Thread coil size: M8 x 1.0(I), M10 x 1.0(E), M10 x 1.0(I), M12 x 1.0(E), M10 x 1.25(I), M12 x 1.25(E), M12 x 1.25(I), M14 x 1.25(E)

CH1214309

Spark Plug Gauge

Description:

* This popular solid steel spark plug gauge is designed with a tapered edge for gauging spark plugs and with a flanged hole to adjust the side wire of plugs without pressuring center electrode.

* Marked in standard and metric sizes. Used to gap all plugs from .020” to .100” (0.5 to 2.53mm).

Description:

* 20 crest for lambda probes with 1/2” female square drives

* Size:22mm(H) x 100mm(L)

CH0915224-1

Description:

* 20 crest for lanbda probes with 1/2” female square drives

* Size:22mm(H) x 85mm(L)

CH0915229

Description:

* Size: 1/2” x 7/8” (22mm x 90mmL) * 7mm(W) slot for sensor wire.

* Suitable for Ford, GM, Chrysler, Japans car and other cars.

CH0812131

CH091594

11PCS Sensor & Sending Unit Socket Master Set

Description:

* 22mm special tube socket

* Oxygen sensor thread chaser.

* Oxygen sensor wrenches off set (2-1/8”) & super duty 12 & 6 point socket.

* Oxygen sensor socket.

* 1/2”dr. x 29x 90mm oxygen sensor socket.

* 3/8”dr.x 7/8”x 90mm oxygen sensor socket.

* 1/2”dr.x 27 x85mm injector socket.

* 3/8”dr.x 7/8”x 80mm vacuum switch socket.

* 3/8”dr.x 1-1/6” x 74mm oil sender unit socket.

* 3/8”dr.x 7/8”x 50mm heated oxygen sensor socket.

* 3/8”dr. x 7/8”x 30mm offset oxygen sensor wrench.

CH091593

8Pcs Sensor Socket Set

Description:

* 22mm special tube socket

* Oxygen sensor thread chaser.

* Oxygen sensor wrenches off set (2-1/8”) & super duty 12 & 6 point socket.

* Oxygen sensor socket.

* 1/2”dr. x 29x 90mm oxygen sensor socket.

* 3/8”dr.x 7/8”x 90mm oxygen sensor socket.

* 3/8”dr.x 7/8”x 50mm heated oxygen sensor socket.

* 3/8”dr. x 7/8”x 30mm offset oxygen sensor wrench.

9Pcs Oxygen Sensor Socket and Wrench Set

Feature: * Special design for installing Lambda probe

Size: 17,19,22mm

CH200886 Oxygen Sensor Thread Repair Set

Feature:

For repair damaged Lambda probe threads

Quick and easy repair without extensive component

Disassembly, easy to use and proper fixed with absolute gas

Tight seating of the inserts. Thin wall bushing with rust

Content: * 1pc thread cutting tap M18 x 1.5, L:50mm

1pc thread cutting tap M20 x 1.5, L:50mm

1pc piloted reamer M18 x 1.5, L:50mm * 1pc screw in tool for insert nut, M18 x 1.5, L:80mm

1pc screw sleeve 27H x 73mm

5pcs insert nut with collar, L:9mm, IG=M18 x 1.5/AG=M20 x 1.5

CH200881

Oil Filter Pliers and Wrench

CH081258 Oil Filter Wrench

Description:

* An artistic outlook, light and handy, durable and made under strict processing and treatment.

* Breakaway Torque : min. 150 N-m .

* 1/2”dr. fit for dismounting oil filter for vehicle of 55-95mm range in diameter. The body could be shrunk to 72mm.

* The clamp rods are also able to disassembled and replaced with difference length and shape as requirement.

* Further with magnetic and anti-slip pad at the bottom. Easy to adjust with single hand.

* Box wrench, ratchet socket wrench and turntable wheel wrench which attached with the equipment are suitable to dismount/mount all difference type of oil filter.

* Surface attachment of the tri-clamp-rods and oil filter, prevent deformation of oil filter.

CH080790-A

Description

* Range:2-1/2”-4” (63-102mm)

* Removes all oil filters from 2-1/2” to 4” in diameter.

* Use with 1/2” or 3/8” square drive tool.

CH0807106-A

Description

* Range:2-1/2”-4-3/4” (63-102.6mm)

* Removes all oil filters from 2-1/2” to 4-3/4” in diameter.

* Use with 1/2” or 3/8” square drive tool. CH1214223-A,CH1214223-B

Description:

mm. Length 520mm.

E-mail: chihtai@ms16.hinet.net

Heavy-Duty Oil filter Wrench

CH0807101, 5”- 5-3/4”(125-145mm)

CH0807101-0520, 4-1/8” – 4-3/4” (105-120mm)

CH0807101-1535, 4-1/2” – 5-1/4” (115-135mm)

Description

* Wide steel band designed to withstand the high torque requirements of truck, bus, RV and heavy duty equipment filters.

* Use with 1/2” square drive tool.

Heavy-Duty Oil filter Wrench

CH0807103, 4-3/8”- 5-1/4”(110-130mm)

CH0807103-0525, 4-1/8” – 5” (105-125mm) CH0807103-2040, 4-3/4” – 5-1/2” (120-140mm)

CH080799 Oil Filter Cutter

Description

* This tool is designed for cut oil filters before recycle it.

* Two bearing design is save power and more easily when rotary the oil filter.

* The material of blade is SKH9, main body is aluminum alloy steel, more light, more sharp and stronger construction.

* This cutter incorporates a longer palate that allows cutting filters from 60mm to 140mm in diameter.

CH080739 Swivel Filter Wrench

Content:

* Item No.: CH080739-1, Extra Small Swivel Filter Wrench, 2-3/8” to 2-7/8” (60-73mm)

* CH080739-2, Small Swivel Filter Wrench, 2-7/8” to 3-3/8” (7385mm)

* CH080739-3, Medium Swivel Filter Wrench, 3-3/8” to 3-3/4” (8595mm)

* CH080739-4, Large Swivel Filter Wrench,3-3/4” to 4-3/8” (95111mm)

E-mail: chihtai@ms16.hinet.net

CH0807111 Swivel Filter Wrench

Content:

* Item No.: CH0807111-1, Extra Small Swivel Filter Wrench, 2-3/8” to 2-7/8” (60-73mm)

* Item No.: CH0807111-2, Small Swivel Filter Wrench, 2-7/8” to 33/8” (73-85mm)

* Item No.: CH0807111-3, Medium Swivel Filter Wrench, 3-3/8” to 3-3/4” (85-95mm)

* Item No.: CH0807111-4, Large Swivel Filter Wrench,3-3/4” to 43/8” (95-111mm)

CH111302-10 10” Oil Filter Pliers

Description:

* 3-position adjustable slip joint

* Heavy duty

* Capacity: 6

CH121483-A

Swivel Jaw Filter Wrench Plier

Description:

* Jaws swivel 90°in either direction to access most oil and fuel filters.

* Works where other oil and fuel filter pliers and wrenches don't.

* Jaws adjust to 4 positions, (30°increments) to fit most applications.

* Slip-joint handle offers a big range from 2-1/4" to 4-3/4" (57mm to120mm).

* Sure grip teeth prevent slipping.

* Cushioned handles provide comfort.

* Length: 325 mm

CH121483-B

Swivel Jaw Filter Wrench Plier

Description:

* Jaws swivel 90°in either direction to access most oil and fuel filters.

* Works where other oil and fuel filter pliers and wrenches don't.

* Jaws adjust to 4 positions, (30°increments) to fit most applications.

* Slip-joint handle offers a big range from 3-1/8" to 7-1/2" (80mm to190mm).

* Sure grip teeth prevent slipping.

* Cushioned handles provide comfort.

* Length: 405 mm

CHIH TAI Y&S CO., LTD.

CH1214224

Differential Filter Spanner Wrench

Description:

* Size: 46 mm x 12 PT

* Hex Key: 5 mm

CH1214395

CH1214330

CH1308273

E-mail: chihtai@ms16.hinet.net

* Applicable: VW5+6-Gang Schaltgetriebe Allrad (Bora, Golf IV, Sharan, Skoda-Octavia)

Oil Filter Socket (Mercedes Benz)

Description:

* Size: 1/2”dr. x 84mm/14flats.

* Suitable for Mercedes Benz OM 642 diesel engine. -C class(320), CLS(320), E class(280,320), S class(320), ML(280, 320),etc.

* Also for Dodge/Jeep/Chrysler with 3.0L V6 diesel engine.

Oil Filter Wrench(Hyundai/Kia)

Description:

* The wrench is designed specifically to service Hyundai / Kia vehicles with 2.0L or 2.2L diesel R-engine.

Oil Filter Wrench(74mm,14Point)

Description:

* New Style Mercedes Oil Wrench 74mm with 14 Points.

Application:

* Mercedes 102, 103, 104, 111, 112, 113, 119, 120, 611

* Mercedes 109E 2.3 1985-1993, Mercedes 260E 1987-1989

* Mercedes 300CE 1988-1989, Mercedes 300E 1986-1992

* Mercedes 300E 4-Matic 1990-1993, Mercedes 300SE 1988-1991

* Mercedes 300TE Wagon 1988-1992

* Mercedes 300TE 4-Matic Wagon 1990-1993

* Other applications include: Audi, VW Golf, and now body Jetta

* TDI (Diesel) and the following gas vehicles; Passat, Golf and Jetta with 1.8 turbo and 2.0 liter, Rabbit.

CHIH TAI Y&S CO., LTD.

CH0812236

Oil Filter Housing Removal Tool(WAF 27mm)

Description:

CH0812145

E-mail: chihtai@ms16.hinet.net

* This oil filter housing removal for the removal and installation of the specified difficult to access oil filter covers.

* Indispensable tool when replacing the oil filter cartridge.

Application:

* Oil filters on FORD / PSA 2.0 L Durotorq TDCI / HDI (DW10C) and 2.2 L Durotorq TDCI / HDI (DW12C) diesel engines.

* S Max, Mondeo, Galaxy, Euro 6 compliant engines from 2010 onwards.

* Bi Hex x 1/2" Drive.

Oil Filter Wrench for OPEL and Vauxhall Petrol Engines(WAF 32mm)

Application range:

* Vauxhall /Opel cars with 2.0L / 2.2L petrol engines.

* With A and Z engine codes.

* Astra-G / Vectra-B / Vectra-C / VX220 Speedster/ Zafira-A / Omega-B / Astra-H / Signum / Zafira-B / Zafira Family / Insignia.

* Equivalent to OEM KM-6150

* Bi Hex x 1/2" Drive

CH1214232-12

CH1214232-2B

Oil Filter Wrench 74mm x 14 flutes

Description:

* Wrench for gasoil to immersion.

* Aluminium Filter wrench in 1/2"D for use on Audi BMW,Citroen,Fiat,Ford,Lancia,Mazda,Mercedes, Nissan,Peugeot,Renault,Suzuki,Toyota,Vauxhall/Opel and Volkswagen.

* Size: 14 sides Ø 74mm

Oil Filter Wrench

Description:

* For VW-Audi diesel engines with MANN-, Mahle- or Knechtfilter.

*This tool is especially applicable for removal of oil filters in narrow space conditions.

* Drive: 22 mm hex or 1/2”

E-mail: chihtai@ms16.hinet.net

CH1308296 Professional Oil Filter Wrench (Mitsubishi, Mazda & Daihatsu, 101mm, 15Point)

CH1308297

CH0812140

Description:

* Size: Dr. 1/2”, 15 points, 101mm

* Application: MITSUBISHI, MAZDA and DAIHATSU Diesel

Diesel Fuel Filter Wrench (Mitsubishi, 8Point)

Description:

* To remove oil filter and drain fuel from the filter.

* Size: 12” Dr. x8 points.

* Application: MITSUBISHI all new CANTER fourth phase eco-car 3.5 ton, 6.7 ton & 6.9 ton.

* Material: Iron

Toyota Oil Filter Socket

Description:

* Special designed for plastic oil filter cap or TOYOTA.

* It is easier to use in limited space.

* Use with 1/2”Dr. tool or 21mm wrench.

* Size: 64.5mm , 14PT .

CH1214341-A

Diesel Filter Wrench (for VW / Volvo)

Description:

* Special designed to remove and install the fuel filter on VW / Volvo diesel engine.

* Suitable for VW Crafter 5-cyl. diesel engine form 2006. Volvo C30, C70, S40, S60, S80, V50, V60, V70, XC60, XC70,XC90.

* OEM Ref. VW T50011 / Volvo 9997084

CHIH TAI Y&S CO., LTD.

E-mail: chihtai@ms16.hinet.net

CH1214397

Diesel Filter Wrench (Hyundai/ Kia)

Decsription:

* The wrnehc is designed specifically to service the fuel filter on Hyundai/ Kia vehicles with 2.0L or 2.2L CRDi engine.

* Size: 1/2”dr.

Application:

* Hyundai Santa Fe(TM) 2018~ * Hyundai Palisade 2018~ * Kia Sorento(UM) 2018~

CH0812252

Oil Filter Wrench (Mitsubishi)

Description:

* For removing and installing fuel filters.

* Size: 1/2”dr. 14 point, 66mm

* Application: LANCER 1.6T & VIRAGE 1.8TC

CH0812255

Oil Filter Wrench (Renault)

Description:

* For removing and installing fuel filters.

* Size: 1/2”dr. 6ribs, 66mm

* Application: RENAULT.

CHIH TAI Y&S CO., LTD.

CH0915111-C

3PCS Filter Socket Kit

Description:

CH0915111-B

E-mail: chihtai@ms16.hinet.net

* Can be used for a variety of filter housing applications.

* All sockets are 3/8”dr.

Content:

* 1pc 29mm(1-1/8”) for dodge Cummins fuel filter housing.

* 1pc 32mm(1-1/4”) for GM ECOTEC 2.0L, 2.2L and 2.4L four cylinder oil filter housing, some SATURN & SAAB.

* 1pc 35/36mm for FORD 6.0L diesel fuel and oil filter housing, mini cooper and some BMW oil filter housing, and MACK truck oil filter housing.

6Pcs Filter Socket Kit

Description:

* Filter cap wrench kit with 6 different sizes for use with most popular vehicles.

Content:

* 1pc 24mm for use on CADILLAC 36

* 1pc 27mm for use on MERCEDES A CLASS,VW, 2.8L, 3.2L & 3.6L V6 USED IN CADILLAC CTS,STS,SRX,BUICK RENDEZVOUS ULTRA,BUICK LACROSSE CXS,SATURN L3000,SAAB 9-5 & MERCEDSE 1.8L

* 1pc 29mm for use on DODGE CUMMINS Fuel filter housing.

* 1pc 32mm for use on 2.2 SATURN ECOTEC, SABA, and GM

* 1pc 35/36mm for FORD 6.0L diesel fuel and oil filter housings, MINI COOPER and some BMW oil filter housings, and MACK truck oil filter housing.

* 1pc 38mm for use on VAUXHALL/VECTRA 2 liter diesel engine.

CH0915111-D

7PCS

Filter Socket Master Kit

Description:

* Filter cap wrench kit with 6 different sizes for use with most popular vehicles.

* 1pc 24mm for use on CADILLAC 36

* 1pc 27mm for use on MERCEDES A CLASS,VW, 2.8L, 3.2L & 3.6L V6 USED IN CADILLAC CTS,STS,SRX,BUICK RENDEZVOUS ULTRA,BUICK LACROSSE CXS,SATURN L3000,SAAB 9-5 & MERCEDSE 1.8L

* 1pc 29mm for use on DODGE CUMMINS Fuel filter housing.

* 1pc 32mm for use on 2.2 SATURN ECOTEC, SABA, and GM

* 1pc 35/36mm for FORD 6.0L diesel fuel and oil filter housings, MINI COOPER and some BMW oil filter housings, and MACK truck oil filter housing.

* 1pc 38mm for use on VAUXHALL/VECTRA 2 liter diesel engine.

* 1pc 30mm for Korean car use.

CH170807-A 15 Pcs Oil Filter Wrench Kit (metal)

Content:

* 14Pcs oil filter wrench: 65mm-14, 65/67mm-14, 68mm-14, 73mm-14, 74/76mm-15,75/77mm-15, 76mm-14, 76mm-30, 80mm-15, 80/82mm-15, 90mm-15, 93mm-15, 93mm-36, 100mm-15

* 1pc 3/8”1/2”Adapter

CH080707

30PCS Cup Type Oil Filter Wrench Kit

Description:

* These cup-type filters are made of 7 & 16 gauge construction and are able to withstand up to 85 ft.Ibs of torque.

* Cup-type design grips like a socket minimizing the possibility of crushing filters.

* Fits 3/8" or 1/2" square drive tool Coated with electro-black oxide finish for protection against rust.

Content:

* 28pcs oil filter wrench: 66mm-6flutes, 65/67mm-14 flutes,68mm-14 flutes, 73mm-14flutes, 74mm-15 flutes,74/ 76mm-15 flutes, 75/77mm-15 flutes,76mm-12 flutes,76mm-14 flutes, 76mm-30 flutes,78mm-15 flutes,80mm-15 flutes, 80/82mm-15 flutes,86 mm-16 flutes,86mm-18 flutes, 90mm-15 flutes,92mm-10 flutes, 93mm-15 flutes, 93mm-36 flutes, 93mm- 45 flutes, 95mm-15 flutes, 96mm-18 flutes,100mm-15 flutes,106mm-15 flutes, 108mm-15 flutes,108mm-18 flutes

* 1pc two way oil filter wrench 65-120mm

* 1pc Adapter 1/2" (F) or 3/8" (M) Square drive Tool

CH0812332

E-mail: chihtai@ms16.hinet.net

Oil Drain Tool

CH120845-HA Oil Funnel (Honda, Nissan)

Description:

* Funnel can be directly connected to oil filler necks, eliminating unsafe oil spills, hands-free and one-person operation

* Large oil passage allows oil to flow down more rapidly

* Lower transparent chamber shows oil flows down to engine

* Application on Acura, Honda, Hyundai, Kia, Infiniti, Nissan, Suzuki

CH120845-HST Oil and ATF Funnel Set (Honda)

Description:

* Funnel can be directly connected to oil filler necks, eliminating unsafe oil spills, hands-free and one-person operation

* Yellow adapter for Subaru oil filler necks

* Extended 150 degree adapter specially designed for Acura –MDX, RDX, ZDX, Honda Odyssey and Pilot, and new GM where the oil filler necks have very limited access

* Long aluminum tube and PVC hose for refilling ATF through dipstick, especially for ATF dipstick located in deep location, such as Acura and Honda

CH120845-VA Oil Funnel Set (Audi, Seat, Skoda, VW No-spill Complete Coverage)

Description:

* Funnel can be directly connected to oil filler necks, eliminating unsafe oil spills, hands-free and one-person operation

* Large oil passage allows oil to flow down more rapidly

* Lower transparent chamber shows oil flows down to engine

* Suitable for Audi, Seat, Skoda, Volkswagen, with adapters for the most recent models (2020 onwards).

CH120845-RN Oil Funnel Set(Renault, Nissan, No-spill complete coverage)

Description:

* Funnel can be directly connected to oil filler necks, eliminating unsafe oil spills, hands-free and one-person operation

* Large oil passage allows oil to flow down more rapidly

* Lower transparent chamber shows oil flows down to engine

* Suitable for Renault and Nissan, with adapters for the most recent models.

CHIH TAI Y&S CO., LTD.

CH120845-MB Oil Funnel Set-(BMW, Benz)

Description:

E-mail: chihtai@ms16.hinet.net

* Funnel can be directly connected to oil filler necks, eliminating unsafe oil spills, hands-free and one-person operation

* Large oil passage allows oil to flow down more rapidly

* Lower transparent chamber shows oil flows down to engine

* Suitable for BMW and Benz

CH1308141

CH051082

14 Pcs Oil Funnel Master Kit

Description:

* Allows for fast oil filling without spillage or waste

* Great for vehicles with internal baffles or shields

* Color-coded adapters fit oil filler holes on many European, Asian & US vehicles

* 2 liter universal funnel fits all adapters

* Special angled extension with locking design allows access in hard-to-reach applications

Content:

* Funnel - 2 Liter

* Angled Extension

* Adapter - Bayonet type - Red - European & Dodge Sprinter

* Adapter 1/4 turn - Light Blue - VW, Audi, Seat & Skoda

* Adapter w/ M42 Thread - purple - Subaru(except Tribeca)

* Adapter w/ M37 Thread - Blue - Toyota, Lexus, Scion & Pontiac

* Adapter w/ M35 Thread - Orange - Ford, Mazda, Jaguar & Land Rover

* Adapter w/ M32 Thread - Green - Dodge, Honda, Acura, Nissan, Jaguar, Ford, Mazda, Jeep & Land Rover

* Adapter - Bayonet-type - Yellow - Toyota & Lexus

* Adapter 1/2 turn - Red - Cadillac, Chevy, Ford, GMC, Hyundai, Jaguar, Land Rover, Mazda, Saab & Mercury

* Adapter threaded - Red - Dodge Cummins 3.3L, 3.8L, 5.7L, 6.7L

* Adapter 1/2 Turn - Green - Dodge 3.6l, Hemi 6.4L

* Adapter 1/2 Turn - Black - Mazda 3,6,CX-5

* Adapter - Elbow - Orange - Honda Pilot & others

Oil Funnel-- PAT.

Feature:

* Hands free funnel w/comfortable grip

* High quality PC material: sturdy, durable and clear vision

* Vent: circulating convection, avoid bubbling and overflow.

* w/ filter impurities

* An additional 45 degree adapter available, for narrow space.

* w/6pcs adapter for various car: Toyota, Volvo, Benz, Mazda, Subaru, Honda

E-mail: chihtai@ms16.hinet.net

CH200860 Oil Drain Plug Key

Description:

* Size: S8x10 (8 point)

* For oil filler and oil drain plug on gearbox,oil pan on PEUGEOT and RENAULT vehicle since 1983.

CH200862 Drain Plug Wrench

Description:

* Length:240mm

* Size: 19mmX M16 Spline(Tamperproof)

* Application: Audi A4 & A6, BMW

CH200850 Audi Transmission Dipstick/Oil Dipstick

Description:

* This oil gauge and dipstick is designed for measuring the oil levels on different Audi engines fitted with electronic oil level systems.

* The tool also checks the oil levels in Audi A4 A5 6 cylinder petrol 3.2 litre 4 valve engines.

* It can also be used to assist the calibration of the driver’s instrument panel. OEM Code:T40178, Audi A4 2008 >, Audi A5 2008 > 6-cyl. Petrol direct injection 3.2L 4V engine

Feature:

* This oil gauge and dipstick is designed for measuring the oil levels on different Benz mode.

Content:

* CH200891-A, to measure the oil level of transmission. -Length: 1220mm, applicable for transmission type 722.6

* CH200891-B, to measure the oil level of transmission. -Length: 920mm, applicable for transmission type 722.7, 716.5.

* CH200891-C, balance the top of the oil gauge.

-Length:930mm, applicable: engine model:103, 943/984/985,104,111,119,120,137,603,913/963/97,604,605,606,61 1,612,613,626.

* CH200891-D, the top of the oil gauge can turn back to 90 degrees.

-Length:930mm, applicable engine model:112,113,646,647,648

CH200891 Series Benz Transmission Dipstick/Oil Dipstick

CH121433-B Oil Pan Repair Master Set

Description:

* Solid and fast solution for the repair of defective oil drain screw thread without the expensive replacement of the sump.

Application:

* The damaged thread is simply to tap away to the next size expands. Oil drain screw in part with Allen drive for oil pans with recessed drain opening suitable.

* Universal applications e.g. for: Audi, BMW, Citroen, DaimlerBenz, Ford, Fiat, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Toyota, Volvo, VW etc.

* Scope of supply: complete with 1 / 3 foam insert in the plastic case. Replacement oil drain screw and aluminum seals are available.

Consisting of:

* 1pc Special Taps M13x1.5

* 1pc Special Taps M15x1.5

* 1pc Special Taps M17x1.5

* 1pc Special Taps M20x1.5

* 5pcs Oil drain plug gasket with aluminum M13x1.5 external drive 6-kant SW17

* 5pcs Oil drain plug gasket with aluminum M15x1.5 external drive 6-kant SW19

* 5pcs Oil drain plug gasket with aluminum M17x1.5 inner drive 6kant SW 8

* 5pcs Oil drain plug gasket with aluminum M20x1.5 inner drive 6kant SW 10

CH121433-D

Oil Drain Plug Master Thread Repair Kit

Description:

* A comprehensive thread repair kit ideal for repairing sump, gearbox and differential drain plug threads.

* Used to tap the damaged thread slightly over size, then fit a new drain plug and washer supplied.

* Set is suitable for the most popular threads used on cars and light commercial vehicles.

* Tap Sizes: M13 x 1.25, M13 x 1.5, M15 x 1.5, M17 x 1.5, M20 x 1.5, M22 x 1.5mm

E-mail: chihtai@ms16.hinet.net

CH1214357-AZ Plastic Oil Drain Plug Set

Description:

* With 1pc 3/8”dr. 17mm handle (Item No.: CH1214357-A)

* With 3pcs oil drain plug (Item No. CH1214358-A, CH1214359-A, CH1214304-C)

Application:

* CH1214358-A , for FORD/PEUGEOT/CITROEN oil drain plug

Suitable for FORD2.0 TDCi

FORD C-MAX(2015~), Focus(2014~), Galaxy(2015~), Kuga(2014~), Mondeo(2014~), S-Max(2015~)

Suitable for PSA 2.0 HDi

Peugeot 308(2013~), 508(2014~), 3008(2009~), 5008(2009~), Traveller(2016~) Citroen C4(2013~), C5(2009~, 2015~), DS4(2014~2015), DS5(2013~2015), Jumpy(2016~), Space Tourer(2016~)

* CH1214357-A, for FORD oil drain plug

Suitable for FORD 1.5, 1.6 TDCi/ 1.0, 1.6 EcoBoost

FORD Transit / Tourneo Connect(2013~)

Suitable for FORD 1.5, 2.0,2.3,2.5,2.7,3.5,3.7,5.0,5.2 petrol/ 6.2, 6.7, 6.8 diesel

FORD Edge (2015~2017), F-150(2015~2016), Fusion(2017), Mustang(2015~2017), F250/350/450/550 Super Duty- Diesel(2011~2012) Suitable for LINCOLN 2.0, 2.7,3.7 petrol LINCOLN MKX(2016~2017)

* CH1214359-A, for BMW oil drain plug Suitable for BMW N13-1.6/ N20-1.6, 2.0/N26-2.0 BMW F07,F10,F11,F18,F20,F21,F22,F23,F30,F31,F32, F33,F34,F35,F36,F80,F82,F83,F87,E84,E89

* CH1214304-C, for VW/AUDI/SKODA/SEAT oil drain/Cam cover Plug

Suitable for VAG 1.8,2.0 TSI/TFSI；1.6 , 2.0TDI VW Beetle, Caddy, C, Golf, Jetta, Passat, Polo, Scirocco, Sharan, Tiguan, Touran AUDI A1, A3, A4, A5, A6, A7 Q3, Q5, Q7, TT, TTS SKODA Ibiza, Octavia, Rapid, Superb, Yeti SEAT Alhambra, Leon, Toledo

CH1214358

E-mail: chihtai@ms16.hinet.net

Plastic Oil Drain Plug(for FORD/PEUGEOT/CITROEN)

Description:

Suitable for FORD 2.0 TDCi FORD C-Max(2015~), Focus(2014~), Galaxy(2015~), Kuga(2014~), Mondeo (2014~), S-Max(2015~) Suitable for PSA 2.0HDi PEUGEOT 308(2013~), 508(2014~), 3008(2009~), 5008(2009~), Traveller (2016~) CITROEN C4(2013~), C5(2009~, 2015~), DS4(2014~2015), DS5(2013~2015), Jumpy(2016~), SpaceTourer(2016~)

CH1214357

Plastic Oil Drain Plug (for FORD)

Description:

Suitable for FORD 1.5, 1.6TDCi/1.0, 1.6 EcoBoost FORD Transit/ Tourneo Connect(2013~) Suitable for FORD 1.5, 2.0, 2.3,2.5,2.7, 3.5, 3.7, 5.0, 5.2petrol/ 6.2, 6.7, 6.8 diesel FORD Edge (2015~2017), F-150(2015~2016), Fusion(2017), Mustang (2015~2017), F250/350/450/550 Super Dutydiesel(2011~2012)

Suitable for LINCOLN 2.0, 2.7, 3.7 petrol LINCOLN MKX(2016~2017)

Description:

Suitable for BMW N13-1.6/N20-1.6 , 2.0/N26-2.0 BMW F07, F10, F11, F18, F20, F21, F22, F23, F30, F31, F32, F33, F34, F35, F36, F80, F82, F83, F87, E84, ,E89

Description: Suitable for VAG1.8, 2.0 TSI/ TFSI；1.6, 2.0TDI VW Beetle, Caddy, CC, Golf, Jetta, Passat, Polo, Scirocco, Sharan, Tiguan, Touran AUDI A1, A3, A4, A5, A6, A7, Q3, Q5, Q7, TT, TTS SKODA Ibiza, Octavia, Rapid, Superb, Yeti SEAT Alhambra, Leon, Toledo

CH1214357-Z

Electronic Stethoscope

CH080708 Combination Electronic Stethoscope Kit

Description:

Engine stethoscope:

* Use to locate & identify engine noise.

* Super sensitive microphone pick-up.

* Flexible non-conductive shaft.

* Cushioned headphones.

Component stethoscope:

* Detect & isolate noisy components.

* Enables road test diagnosis.

* 4 Channel sensor selector unit.

* 4 Pick up sensors-4.8m long cords.

* 9V battery 2pcs

CH080708-2

Combination Electronic Stethoscope Kit

Description:

Engine stethoscope:

* Use to locate & identify engine noise.

* Super sensitive microphone pick-up.

* Flexible non-conductive shaft.

* Cushioned headphone.

Component stethoscope:

* Detect & isolate noisy components.

* Enables road test diagnosis.

* 6 channel sensor selector unit.

* 6 pick up sensors-4.8m long cords.

CH080708-3

Stethoscope

Description:

* Professional mechanic quality.

* Sensitive instrument.

* Provides a fast and easy way to locate troubles in engines, bearings and other moving parts.

* Plastic ear phones shut off outside noises.

* Aluminum steel probe needle for finding the exact location of unusual noises.

* Plastic and rubber parts make the instrument shockproof.

CH080708-4

Mechanic’s Stethoscope

Description:

* Professional quality for mechanic.

* Sensitive instrument.

* Provides a fast and easy way to locate troubles in engines, bearings and other moving parts.

* Plastic ear phones shut off outside noises.

* Aluminum alloy probe/needle for finding the exact location of unusual noises.

* High quality surgical PVC & rubber parts for increased sound definition.

* Instrument is shockproof.

* Ideal for pinpointing unusual vibrations or suspected leaks (valves, piston rings, gaskets, etc.)

* Supplied with rubber trumpet for checking vacuum & pressure flow.

* Useful for synchronizing multi carburetors.

CH080708-5

Mechanic’s Stethoscope

Description:

* Professional quality for mechanic.

* Sensitive instrument.

* Provides a fast and easy way to locate troubles in engines, bearings and other moving parts.

* Plastic ear phones shut off outside noises.

* Aluminum alloy probe/needle for finding the exact location of unusual noises.

* High quality surgical PVC & rubber parts for increased sound definition.

* Instrument is shockproof.

* Ideal for pinpointing unusual vibrations or suspected leaks (valves, piston rings, gaskets, etc.)

* Supplied with rubber trumpet for checking vacuum & pressure flow.

* Useful for synchronizing multi carburetors.

Other

Description:

* Disconnects the heater hose fittings on Ford Focus 2.0L (2012 ~ 2016) / Escape 2.0L EcoBoost (2013 ~ 2016) and more.

* These types of fittings are close to the firewall behind the engine and are difficult to turn.

Description:

* For installing and removing staggered relays ,e.g. on OPEL, RENAULT and NISSAN.

* Jaws 60° bent, made of special steel * Pliers with solid plastic body * Material: Steel

Description:

* Easy loosening of quick-connectors with dia. 4 , 6 , 8 , 10 , 12 mm * Screw Size：M8 x 1.25 x 90mmL x Hex 14mm * Enables separating of contaminated tubes and plug connectors * Convenience for one person used and prevent injury Application:

Description:

* Mounting the damper cartridge Front for Audi 100, Audi 200 and A6 C4 models.

* For opening and closing the cap nut on the strut. * Drive 1/2” square drive.

* Material:Carbon Steel

CHIH TAI Y&S CO., LTD.

E-mail: chihtai@ms16.hinet.net

CH1214296 Volvo/Land Rover Blower Motor Remover/Installer

Description:

* Design to remove and install the motor remover

Application:

* Volvo: S60(2011~), S60 Cross country, S60L, S80(2007~), S80L, V60, V60 Cross country, V70(2008~), XC60, XC70(2008~)

* Land Rover: Freelander 2/LR2(2006~2014), Range Rover Evoque(2008~)

* OEM Ref.: Volvo 9997284/ Land Rover 412-140

Timing Tool and Alignment Tool

Timing Tool and Alignment Tool Series

CH0911217

Engine Timing Tool Kit (VW Group 2.7/3.0)

Applications:

* This kit includes special adaptors for turning and aligning the crankshaft with the cylinder head.

* Specifically designed for servicing V6, 4 valve, common rail diesel engines, chain driven engines fitted to: -Audi A4 2.7 TDi with engine codes BPP (05-09) -Audi A4 Quattro 2.0 TDi with engine code BMZ(05-06) -Q7 3.0 TDi with engine codes BUG,BUN(06-09) -Volkswagen Touareg 3.0 V6 (08-)

CH091133

Timing Tool Set (VW/ Audi FSI 2.0L)

Description: * With camshaft tools, chain tensioner retainer , locking pins and tensioner bolt. * For 2.0 FSI petrol engines since 2003 in： 。 AUDI A3 2.0 FSI and FSI SOHC engines codes AWA，BHD， BMB 。 VW GOLF 2.0 FSI and 2.0 FSI SOHC and Touran 2.0 FSI SOHC engine codes AWA ，AXW

CH0911211

Engine Timing Tools (VAG 1.6/2.0TDI)

Application:

* Audi: -A3 1.6(2009) ,ENGINE CODE:CAYB/CAYC -A3/A4/A6/Q5 2.0(2007),ENGINE CODE:CBAB/CBBB/CBAA/CFFB/ CAGA/CAHA/CAGB/CAHB/CAGC

* Seat: -EXEO 2.0(2009), ENGINE CODE:CAGA/CAHA/CAGA

* Volkswagen: -GOLF /GOLF PLUS 1.6(2009), ENGINE CODE:CAYB/CAYC -TIGUAN/PASSAT/EOS/GOLF/GOLF PLUS 2.0(2008), ENGINE CODE:FCA/CAAA/CAAB/CAAC/CCHA/ CAVA/CBAB/CBDA/CBDD/CBBB/CBAA/CBAC/ CBDA/CBDC

CH0915396

Engine Timing Tool Kit (VAG 1.6/2.0 TDI)

Description:

* An 8pcs kit consists of the component which requires to lock the crankshaft the cam pulley and the fuel pump pulley in the timed position to removal and the replacement of the camshaft timing belt.

* Application: 1.6/2.0 TDI diesel engine

CHIH TAI Y&S CO., LTD.

CH091148

Engine Adjustment Tool Kit (Audi A4/A6)

Application:

E-mail: chihtai@ms16.hinet.net

Contains important tools e.g. for following work on Audi with 2.4l/3.2l FSl V6.V8.V10 petrol engines.

-For locking the cam and crankshaft

-For fixing the chain tensioning unit

-For replacing the timing chain

-For adjusting the timing during engine repairs Suitable for : -Audi A4.A6 of the model series B7 and C6

-With engine codes: AUK.BDW.BGP.BKH.BPK.BYU.BVJ.BNS.B YH.CAUA.BXA und BSM.

CH0911132

Audi Engine Timing Tool Set

Description:

* Camshaft adjuster pre-tensioning

* Camshaft locking

* Removal/installation of timing chain(s)

* Align camshafts

Model Engine Code Year

A6 2,4 BDW 2004-07

A6 2,4 quattro BDW 2004-07

A4 3,2 FSI AUK 2004-07

A6 3,2 FSI AUK,BKH 2004-07

A8 3,2 FSI 2005-07

CH0911216

Engine Adjustment Tool Set (VAG 1.2L TFSI)

Description:

* For 1.2l TFSI engines from “0.8 with Timing chain from VAG with engine Codes CBZA,CBZB,CBZC

* Contains one camshaft locking device and one crankshaft fixing mandrel.

* For adjusting the timing e.g. during replacement of the timing chain or during engine repairs.

CH091168-2

Petrol Engine Setting-Locking Tool Kit (VAG)

Description:

* Models: VW GROUP 1.2 single(6V) and twin camshaft(12V) 3 cylinder petrol engines (02-) in seat, LBIZA / CORDOBA, SKODA,FABIA, VW, POLO.

* Engines AWY and AZQ.

CHIH TAI Y&S CO., LTD.

CH091102

Engine Timing Tools (VW / Audi)

Description:

* Models:

。

CH091159

CH091199

E-mail: chihtai@ms16.hinet.net

AUDI: A4, A6, A8, A 11 road(97-04)

。 VW: PASSTA (98-04)

* Engines codes : AFB, AKE,AKN,AYM, BAU, BCZ, BDG,BDH, BFC.

Engine Timing Tools (VAG)

Description:

* This new kit of twelve tools is required for petrol and diesel engine service including timing belt replacement on recent models and also older 1.9D models from 1976.

VAG Petrol and Diesel Engine Timing Kit

Description:

* Covers most of the VAG group's petrol and diesel engines.

* AUDI: 80, 100, A2, A3, A4, A6, TT.

* SEAT: Terra, Ibiza, Cordoba, Leon, Toledo,Inca & Alhambra.

* SKODA: Fabria, Felicia & Octavia.

* VW: Lupo, Polo/Classic, Caddy, Golf, Jetta, Vento, Bora, New Beetle, Passat, Sharan, Transporter & LT.

CH091566

Timing Setting Tool Kit (VAG/ Citroen)

Description:

* For VW, AUDI, SEAT, SKODA, CITROEN, PEUGEOT.

* Application:

PEUGEOT 106, 205, 206, 306, 307, 309, 405, 406, 407, 605, 806, 807, EXPERT, PARTNER, BOXER (AB 1986), 406 COUPE, 607.

CITOREN AX, ZX, XM, VISA, XSARA, XANTIA, DISPATCH , SYNERGIE / EVASION, BERLINGO, DISPATCH, JUMPY, C 2, C 3, C 5, RELAY / JUMPER. AUDI 80, A2, A3, A4, A6, CABRIOLET (1995 BIS 2000).

SEAT IBIZA, CORDOBA, LEON, TOLEDO, INCA, AROSA, ALHAMBRA, ALTEA.SKODA FELICIA, OCTAVIA (1993 BIS 2005), FABIA.

VW LUPO, POLO, CADDY, GOLF, BORA, NEW BEETLE, PASSAT, SHARAN, TOURAN, TRANSPORTER, 1,7 1,9 D / TD / SDI/ TDI.

CH091574 VW/Audi Engine Timing Setting Set

Description:

* This new kit of twelve tools is required for petrol and diesel engine service including timing belt.

Replacent on recent models and also older 1.9D models from 1976.

Application:

* AUDI:A4, A6, A8, A11YOAD(97-04)

* VW: PASSAT: (98-04)

* Engines Codes: AFB, AKE, AKN AYM, BAU, BCZ, BDG, BDH, BFC

CH091574-A VW/ Audi Engine Timing Setting Set

Description:

* This new kit of twelve tools is required for petrol and diesel engine service including timing belt replacement on recent models and also older 1.9D models from 1976.

Application:

* AUDI:A4, A6, A8, A11YOAD(97-04)

* VW: PASSAT: (98-04)

* Engines Codes: AFB, AKE, AKN AYM, BAU, BCZ, BDG, BDH, BFC

CH091560-A

Engine Timing Tools (VW / Audi)

Description:

* This new kit of twelve tools is required for petrol & diesel engine service.

* Including timing belt replacement on recent models and also older 1.9D models from 1976.

* Models: AUDI A4, A6, A8, A11 YOAD (97-04), VW PASSAT (98-04).

CH091198

Description:

* This tool kit is used to maintain petrol and diesel engines and replace the timing belt on many models.

CH0911224

CH0911188

E-mail: chihtai@ms16.hinet.net

Clutch Installer & Remover (VW/Audi 7 Speed DSG)

Description:

* The special design installs and removes the clutch of gearbox.

Application:

* Model:

-VW: Golf 2004 >, Golf Plus 2005 > -Audi: A3 2004 > with 7 speed gearbox (code 0 AM), Touareg 2003> with 6 speed gearbox (code 08 D)

Clutch Installer & Remover (VW/Audi 7 Speed DSG)

Description:

* The tool is to repair of the clutch unit as well as disassembly/ Assembly of the clutch housing.

* The special design installs and removes the clutch of gearbox.

Application: Model:

* VW: Golf 2004 >, Golf Plus 2005 >

* Audi: A3 2004 > with 7 speed gearbox (code 0 AM), Touareg 2003> with 6 speed gearbox (code 08 D)

CH0911199

Engine Timing Tool Kit (Audi RS3, Q3, TT2.5)

Description:

* Includes the essential components to lock the engine into its timed position, so the timing chain can be replaced or the cam timing checked.

Application:

E-mail: chihtai@ms16.hinet.net

CH0911215

Porsche Cayenne Camshaft Alignment Tool

Description:

* This tool is designed to adjust the timings for the camshafts

* Used to R&R crankshaft pulley bolt 2009 Porsche cayenne Trubo(9PA)V8-4.8L Turbo

* Camshaft: Adjustments

* Setting camshaft timing on 4.8-liter DFI engine

CH0911197

Engine Timing Tool Kit (VAG/Porsche 6&8 cyl FSi)

Description:

* This tool kit provides the essential camshaft, crankshaft and petrol fuel pump alignment tools to allow replacement of the camshaft drive chain on the 2001 to 2015 6 and 8 cylinder FSI petrol engines found across the VAG range plus the Porsche Cayenne.

CH0911101

Engine Timing Tool Set for VAG-2.4D

Description:

* Set of engine timing locking tools for use on Volkswagen 2.4D with engine codes AAB, AJA(02/95-03).

* The correct alignment is achieved by placing equal thickness of shims (C) between both ends of the bracket and the cylinder head.

* Camshaft Setting Strap (B) is used to set the correct timing position of the camshaft.

* The centre Part of the bracket fits into the slotted end of the camshaft and the ends of the bracket locate on thecylinder head.

* Injection Pump Pulley Setting Spigot (D) is 15.4mm in diameter and is used on engines with a one piece Injection Pump Sprocket.

* The Crankshaft Damper Holding Tool (A) prevents the damper from rotating whilst unfastening and refastening the centre bolt.

* This tool should be used with 3/4”D power bar.

* Content

Crankshaft Damper Holding Tool

Crankshaft Setting Strap

Injection pump setting spigot

Shims x 2

CH091110

Timing Tools (VAG2.0 TDI PD)

Description:

* Timing tool Set for VAG 2.0Litre TDI PD DOHC engines fitted to Audi A4, A6 Skoda Octavia ll and Volkswagen Golf / Golf Plus / Jetta and Touran models.

CH0911138

CH0911218

CH050302

CH091180

E-mail: chihtai@ms16.hinet.net

Petrol Engine Twin Camshaft Setting/Locking Tool Kit (VAG)

Description:

* Applicable for VW-AUDI 1.4L and 1.6L FSI petrol engines (engines code：AXU, BLN，BLP) Audi A3；Skoda ,Golf，Golf Plus，Touran, Polo, Ocatvia.

* To check and adjust camshaft timing. Required when replacing timing belts or timing chains or during engine repairs.

* Content: 。 TDC adjusting tool 。 Setting gauge for camshaft 。 Locking bolt

Petrol Engine Setting/Locking Set (VAG1.2,

1.4 TFSi, 1.4,1.6FSi)

Description:

* Timing kit suitable for 1.2/1.4TFSi and 1.4/1.6FSi engines.

* Kit contains essential tools for crank TDC positioning, camshaft setting and tensioner locking.

Alignment Tool Kit (3 sizes)

Description:

The pair of pressure fixtures allows a single technician working alone to adjust and set camber angles. Not only quick and easy, but eliminates and need for addition labour. The tool is placed between the strut or bodywork and the wheel-rim and camber may be adjusted by rotating the hexagonal drive.

Technical Data: 75mm spindle Span width min: 130mm Span width mix: 170mm 85mm spindle Span width min: 148mm Span width mix: 180mm 115mm spindle

Span width min: 170mm Span width mix: 220mm

Application: VW Polo from '95 onwards, Seat Cordoba etc

Engine Timing Tools (VAG/Audi)

Description:

* VW-AUDI 2.5 TDI V6 and AUDI A8 3.3 TDI V8 engine.

* AUDI V6 PETROL and V6 / V8 diesel engine.

A：Fixing gauge for camshaft B：Locking pin for crankshaft

CH0911164

AUDI/VW Cam Alignment Tool Set

Description:

* Holding /Alignment Fixture

* Used to align and hold camshaft

* Applicable：VW polo Disel, Audi 100 since1991,andi A6 with engine Z15L TDI

CH091127

AUDI/VW Cam Alignment Tool Set

Description:

* Holding /Alignment Fixture

* Used to align and hold camshaft * Tension Lever for Volkswagen/Audi vehicles

Applicable：VW polo Disel, Audi 100 since1991,andi A6 with engine Z15L TDI

Holds crankshaft at TDI (top dead center) when removing and installing toothed timing belt and flywheel/ drive plate.

Use to lock the camshafts for installation of drive belt.

* 3/8”Dr. security tools

To lock the automatic tensioner when Changing the Timing belt.

0.8mm,1.2mm,1.4mm,1.5mm,1.8mm,1.9mm

Alfa Romeo , Fiat , Citroen , Peugeot , Renault , Volkswagen

CH0911135

Engine Timing Tool Set (VAG-2.4D)

Description:

* Set of engine timing locking tools for use on Volkswagen 2.4D with engine codes AAB, AJA(02/95-03)

* The correct alignment is achieved by placing equal thickness of shims (C) between both ends of the bracket and the cylinder head.

* Camshaft Setting Strap (B) is used to set the correct timing position of the camshaft.

* The centre Part of the bracket fits into the slotted end of the camshaft and the ends of the bracket locate on thecylinder head.

* Injection Pump Pulley Setting Spigot (D) is 15.4mm in diameter and is used on engines with a one piece Injection Pump Sprocket.

* The Crankshaft Damper Holding Tool (A) prevents the damper from rotating whilst unfastening and refastening the centre bolt. This tool should be used with 3/4”D power bar.

* V W GROUP 2.5TDi Common Rail Diesel engines (Belt) in VOLKSWAGEN LT Crafter；BJJ, BJK, BJL and BJM engines.

* Content: Crankshaft Damper Holding Tool, Crankshaft Setting Stra, Injection pump setting spigot, Shims x 2, Tensioner Adjuster, Crankshaft Locking Pin.

CH0911109 VW 3-IN1 Bosch VE Fuel Injection Pump Adapter Timing Tool

Description:

* Bosch Diesel Injection Pump Timing Indicator Tools Dial Indicator and Holder

* Tools are used for the accurate setting of the Bosch diesel fuel injection pump timing. The Holder screws into the back of the injection pump, giving a dial indicator reading necessary for setting the correct pump timing. This set comes complete with the correct tools for the job.

* Contents: Metric Dial Indicator, plus holder plus extension pins (2) making the timing easy to set, as the timing has a range from 0.83mm to 1.15mm.

* For use on VW and Audi diesels. Indicator Holder Set - Suitable for timing Bosch VE injection pumps. Includes M8, M10, and M12 adapters. To be used in conjunction with Dial gauge. Applicable: Bosch VE fuel pump, Diesel pumps. Indicator Holder for both size shanks Also works with 1981-1986 Volvo 6 cyl 2.4L diesels, 19891994 Dodge 6 cyl 5.9L diesels.

CH091101 VW Bosch VE Fuel Injection Pump Adapter Timing Tool

Description:

* Bosch Diesel Injection Pump Timing Indicator Tools

* This set has a dial guage with an 8mm shank.

* Dial Indicator and Holder

* Tools are used for the accurate setting of the Bosch diesel fuel injection pump timing. The Holder screws into the back of the injection pump, giving a dial indicator reading necessary for setting the correct pump timing. This set comes complete with the correct tools for the job!

* Contents: Metric Dial Indicator, plus holder plus extension pins (2) making the timing easy to set, as the timing has a range from 0.83mm to 1.15mm.

* For use on VW and Audi diesels. Indicator Holder Set - Suitable for timing Bosch VE injection pumps. Includes M8, M10, and M12 adapters. To be used in conjunction with Dial gauge. Applicable: Bosch VE fuel pump, Diesel pumps. Indicator Holder for both size shanks Also works with 1981-1986 Volvo 6 cyl 2.4L diesels, 19891994 Dodge 6 cyl 5.9L diesels.

CH0911127

Diesel Engine Setting/Locking Tool Set

Description:

* V W GROUP 2.5TDi Common Rail Diesel engines (Belt) in VOLKSWAGEN ,LT Crafter, BJJ, BJK, BJL and BJM engines.

* Content:

No.1: Crankshaft Pulley Holding Tool

No.2: Crankshaft Locking Pin

No.3: Camshaft Setting Plate

No.4: Tensioner Adjuster

CHIH TAI Y&S CO., LTD.

CH091197

Support Guide Set (VAG)

Description:

E-mail: chihtai@ms16.hinet.net

* With access tight in the engine bay, the Volkswagen Audi Group have designed the front end of certain vehicles to slide forward giving more room for Cam belt and engine timing servicing.

* These tools are used through the front panel allowing the front panel to be slid forward and held in the service position.

* Three sizes are available 17mm x 2 (OEM 3369) Popular on many engines 8mm x 2 (OEM 3411) Popular on Passat 1.9 TDi PD and 1.6/2.0

* Sharan 1.9 TDi PD

* 10mm x 2 Recently introduced on some of the later models

CH091548

VW/Audi Timing Locking Tool

Description:

* For 2.0L VW/ Audi Engine-Non bored out engine.

CH091168

Petrol Engine Setting-Locking Tool Kit (VAG)

Description:

* Models: VW group,1.2 single (V6) and twin camshaft (12V) SKODA, FABIA, VW,POLO.

* Engines AWY and AZQ.

CH091578-12

CH0911123

Bracket for Chain Adjuster (VW/Audi)

Description:

* Used to retain camshaft chain adjuster.

* Applicable: VW & AUDI 4, 6 (2.7L & 2.8L) & 8 CYLINDER engines containing 5 valves per cylinder.

Timing Belt Tool Set (VW TDI)

Description:

* Used for locking the camshaft, crankshaft and diesel pump while setting the timing belt.

* Applicable to: 1999-2008 VW TDI and pumped use engines.

* Includes new-style cam lock bar.

* Both 2 pin spanner wrenches included.

* Also includes both styles of crankshaft stops.

E-mail: chihtai@ms16.hinet.net

CH091184 Belt Tensioner Locking Pins (VW/Audi TDi PD)

Description:

* Timing belt tensioner pins-OEM Nos T10115,T40011 and Serpentine tension pin-T10060/A

* For use on: Lupo. Polo 1.4 TDi PD Golf, Bora,Polo 1.9 TDi PD Beetle, Sharan 1.9 TDi PD ,Passat 1.9 TDi PD, Audi A2 / A3 1.4 / 1.9 TDi PD, A4 / A6 1.9 TDi, A4 / A6/A8 ALLROAD 2.5 V6 TDi

CH091537

Spanner Wrench For Timing Belt (VAG)

Description:

* This wrench can use for the adjustment of the timing belt. * Application: 2004-2005 VW GOLF, JETTA PUMPE DUSE 20022005 AUDI 3.0 V6 ENGINES.

CH091196

Diesel Engine Camshaft Locking Tools (VAG / FORD / VOLVO)

Description:

* The Diesel Timing Kit is a set of essential tools for setting and locking the camshaft and crankshaft when changing the timing belt on Audi Seat Volvo and Volkswagen diesel engines.

* The kit also forms a part of the Engine Timing & Locking and the comprehensive Diesel Engine and Fuel Pump Timing & Locking Kit.

CH0911103

Alignment Plate Tools (VW&AUDI)

Description:

* Camshaft locking tool for Volkswagen Golf/Bora 2.3 Golf/Vento/Corrado 2.8/2.9 Passat 2.3/2.8/2.9 Sharan 2.8 and Transporter 2.8. * Special designed to align the camshafts to proper position when adjusting and assembling. * Applicable: VW- Passat, VR-6

OEM NO：3368

CHIH TAI Y&S CO., LTD.

CH091170 VW AUDI 1.4/1.6L Camshaft Alignment Tool Set

E-mail: chihtai@ms16.hinet.net

CH0915100

CH0915101

CH091599

CH1214349-A

Description:

* Both camshaft drive pulleys.

* Applicable: VW/AUDI 1.4 / 1.6L petrol engines. VW LUPO, POLO, GOLF IV, BORA /AUDI A2.

Camshaft Alignment Tool (Audi)

Description:

* This tool is used to hold both camshafts at the TDC position while replacing the timing belt.

* Used AUDI models with V6 engine, 2 valves per cylinder.

Camshaft Alignment Tool (VW/Audi)

Description:

* This tool is used for holding both camshafts at the TDC position while replacing the timing belt.

* Used AUDI & VW models with V8 motors with 5 valves per cylinder (except S4)

Camshaft Setting Plate (VW/Audi)

Description:

* This tool is used for holding both camshafts at the TDC position while replacing the timing belt.

* Applicable:

-Audi A4,A6,A8,S4 Allorad(95-04) -VW Passat (96-04) with codes: ACK, AGA, AGB, AJG, ALF, ALG, ALW, AML, AMM, AMX, APR, APS, APZ, AQD, ARE, ARJ, ASM, BDV, BES.

VAG Camshaft Adapter socket

Description:

* The new special tool is required on account of the modified contour in the camshaft adjuster.

* Used to rotate and hold intake camshaft during timing chain service on 4-cylinder 1.8 and 2.0liter 4V TFSI direct injection engine(generation III)

* OEM Ref. T40266

* Suitable for engine codes:

- 1.8TFSI: CDAA, CDAB, CDHB, CJSA, CJSB, CJEB

- 2.0TFSI: CNDC, CDNB, CDNC, CFKA, CPSA, CNCD

E-mail: chihtai@ms16.hinet.net

CH0812237-A

CH121422-B

VW / Audi Camshaft Central Valve Socket

Description:

* Used for removal and installation of 4/3 way central valve for camshaft adjustment.

Application:

* Audi A3 with 4 cylinder gas direct injection, 1.8L, 2.0L, 4V, TFSI engine with chain.

* ENGINE: CCZA, CCZB, CCZC, CDAA, CDAB

* OEM NUMBER: T10352

Description:

* Used for removal and installation of 4/3way central valve for camshaft adjustment.

Application:

* Passat 2006> / Passat CC 2009> / Audi A3 2004> 4-cyl. injection engine (1.8 liter and 2.0 liter engine, chain drive).

* OEM: T10352-1

Camshaft Clamp Tool

Application:

* Touareg 2003, Phaeton 2003, Transporter 2004, 5 and 10-cyl. Diesel engine.

CH200883

Camshaft Clamp Set

Description:

* For removing and installing camshaft drive gear and eliminating play in gear train.

* For locking of both camshafts and crankshaft

* For use on Volkswagen Touareg and Transporter 2.5 TDI PD models with engine code: BAC, BLK, BPD, AXD,AXE,BLJ, BNZ, BPC(03-) plus 4.9D/TDI PD models with engine code:AYH(03-)

* Touareg 2003, Phaeton 2003, Transporter 2004, and 10-cyl. Diesel engine.

CHIH TAI Y&S CO., LTD.

CH0812237-B VW / Audi Camshaft Central Valve Socket

E-mail: chihtai@ms16.hinet.net

CH0915227

Crankshaft Turning Adapter (VW/Audi)

Description:

* Specially designed to turn the crankshaft into position for alignment purpose.

* Applicable: Audi A6 2005~, Audi A8 2003~

* Engine model: 6-cyl. engine 2.4 , 6-cyl. engine 3.2 FSI, 8-cyl. engine, 6- and 8-cyl. TDI Common Rail

CH091543

Crankshaft Locking Tool

Description:

* For 2.0 LITRE VOLKSWAGEN AUDI engines- no bored out engines.

CH0812228

VW, AUDI Flywheel Holder

Description:

* This tool screws into the bell housing and slide in-between the teeth on the flywheel to keep it from rotating.

* For removing and installing pulley.

* Applicable: VW, AUDI

* VM code: 3067

CH0812166

VW /AUDI Drive Sprocket Adjustment Fixture Tool

Description:

* Used when adjusting valve timing.

* For engines without mechanical vacuum pump.

Application range:

* PASSAT with 3.6 liter 6-cyl.4V engine(BLV)

* AUDI Q7 with 3.6 liter V6 4V engine (BHL,BHK)

* VW OEM NO.ref.: T10332

CHIH TAI Y&S CO., LTD.

CH0911232

VW Sprocket Holder

Description:

E-mail: chihtai@ms16.hinet.net

CH0915404

CH091131

* A selection of tip and hole interval are available to make the wrench universal in the range of application and with interchangeable tip and several hole interval.

* Suitable for the timing pulley with the holes in the minimum dia.12.

BMW Combination Timing Tool Set (N47)

Description:

* This kit is for installing and removing camshaft & variable camshaft timing unit, also for aligning the balance shaft and crankshaft timing position.

* Application: BMW N47/N47S/N57 2.0 diesel engines.

* BMW ref. 115320, 116480, 118760, 118740, 113340, 114320, 118750, 118790.

BMW Timing Tool Kit(N62/N73)

Description:

* Master timing kit for BMW N62, N73

* Kit includes Crankshaft Wrench, Angle Indicator, 27mm Socket, Chain Tensioner, and Camshaft Alignment holder and locking pin

CH0911107

Engine Timing Tool Set for Professional Engine Repair BMW N51/N52

Description:

* Special design to locate camshaft in TDC position.

* Applicable: BMW N51/N52 engines

CH091143

Engine Timing Tool Set for Professional Engine repair BMW N51/N52/N53/N54

Description:

* Special design to locate camshaft in TDC position.

* Applicable: BMW N51/N52/N53/N54 engines

* Applicable models：128i.E82(07-08),130i. E81/E87 (05-08), 135iS.E82(07-08),323i.E90/91/92/93(04-08), 325i/xi. E90/91/92/93 (04-08),330i/xi. E90/91/92/93(04-08),335i/xi. E90/91/92/93(0408),523i/Li.E60/61(04-08), X3 2.5/3.0.E83(06-08),525i/Li/xi. E60/61(06-08),630i. E60/61(04-08),528i/Li/xi. E60/61(0608),530i/Li/xi. E60/61(05-08),535i/xi.E63/64(04-08),730i/Li. E65/66(04-08), X5 3.0.E70(06-08),Z4 2.5/3.0. E85/86(05-08). E90/91/92/93(04-08),328i/xi.

CH091140

Engine Timing Tool Set for Professional Engine Repair

Description:

* For BMW diesel engines M41 , M51 , M47 TU – M47 TU / T2, M57 / TU/T2: 2.0l / 3.0l ; YEAR 1998 – 2008

* Installation and removal of the camshaft / hydraulic chain tensioner

* Checking and adjustment of camshaft timing

* Easily accessible operating instructions including cross references to original part numbers

* Spare parts optionally available

* Clear arrangement of tools in high-quality plastic case with soft foam insert

CH091189

Engine Timing Tool Set for Professional Engine Repair

Description:

* For BMW N42 / N46

* Suitable for the following applications:-Camshaft installation and removal as well as removal and installation of the inlet camshaft and carrier assembly / Valvetronic System

* Easily accessible operating instructions including cross references to original part numbers

* Spare parts optionally available

* Clear arrangement of tools in high-quality plastic case with foam insert

CH0911130

Engine Timing Tool Set for BMW

Description:

* No.1: M52TU, M54, M56 (3er E46, 5er E39/E60/E61, 7er E38/E65/E66, X3 E83, X5 E53, Z3, Z4 E85)

* No.2: M52TU, M54, M56

* No.3: M50, M52 (3er E36/E46, 5er E34/39, 7er E38, Z3)

* No.4: M50, M52, M52TU, M54, M56

* No.5: M52, M52TU, M54, M56

* No.6: M50 (3er E36, 5er E34)

* No.7: M50, M52, M52TU, M54, M56

CH0915114

Engine Timing Tool Set (BMW)

Description:

* This comprehensive set of tools enable the correct timing positions to be achieved on both camshaft and crankshaft whilst replacing the timing belt or chain on both petrol and diesel engines.

* Special wrench for controlled turning of the exhaust camshaft sprocket when removing and installing the vanos unit.

* Primary timing chain pre-load tool for tensioning the timing chain on M50 engines.

* M22 threaded for M42/M60 engines.

* M26 threaded for M50/M52 engines.

CH0911161

BMW (M52, M54, M56) Timing Tool Kit

Description:

* BENZ double vanes setup bracket.

* Application: BMW M52, M54 , M56.

CH091115

Engine Timing Tool Set for Professional Engine Repair

Description:

* For BMW N42 / N46 / N46T

* For adjustment and arresting of the twin camshaft on petrol engines：

Engine timing : checking and adjustment

VANOS unit : removal , installation and Alignment

* Suitable for the following applications: Camshaft installation and removal as well as removal and installation of the inlet camshaft and carrier assembly / Valvetronic System

* Easily accessible operating instructions including cross references to original part numbers

* Spare parts optionally available

* Clear arrangement of tools in high-quality plastic case with soft foam insert

E-mail: chihtai@ms16.hinet.net

CH091581 Timing Tool Kit (BMW MINI)

Description:

* This tool kit can use for BMW MINI 2001~2006, MINI COOPER S 2002~2006 AND MINI COOPER 2001~2006.

Contents:

* 1PC – Camshaft sprocket holding tool

* 1SET – Engines support bracket

* 1PC – Tensioner assembly tool

CH091116

Engine Timing Tool Kit for Mini One/ Cooper (N14)/ Cooper (N14)/ Coopers

Description:

* Engine Timing Tool Kit for BMW Mini One 2001-06(W10B16AA), Mini Cooper 2001-06 (W10B16BA) and Mini Cooper S 2002-06 (W11B16AA).

* Content: Camshaft Sprocket Holding Tool, Engine Support Bracket, Tensioner Assembly Tool

CH0911121

BMW Mini Cooper (N14) Timing Tool Set

Description:

* Applicable: BMW MINI COOPER (N14).

* Positioned crankshaft by No.5, when rotating crankshaft in central bolt.

* Note: Do not remove No. 5 while maintenance.

* When repairing exhausted camshaft, installed No. 1 on it and fixed tool by No.3.

* Installed No.2 to cylinder head cover fastens by No.4. Put No.1 on intake camshaft, and fixed tool by No.3.

CH0911230

Engine Timing Tool (BMW Mini/Citroen/Peugeot 1.4, 1.6 N12)

Description:

* The application list for this product has been compiled cross referencing the OEM Tool Code with the Component Code.

* In most cases the tools are specific to this type of engine and are necessary for Cam belt or chain maintenance.

* If the engine has been identified as an interference engine valve to piston damage will occur if the engine is run with a broken Cam belt.

* A compression check of all cylinders should be performed before removing the cylinder head.

* Always consult a suitable work shop manual before attempting to change the Cam belt or Chain.

* The use of these engine timing tools is purely down to the user’s discretion and Tool Connection cannot be held responsible for any damage caused what so ever.

CHIH TAI Y&S CO., LTD.

CH091592

CH0911213

CH091138

E-mail: chihtai@ms16.hinet.net

Timing Tool Kit (BMW, LAND ROVER, GM 2.5 TD-5 engine)

Description:

* For BMW, LAND ROVER, GM 2.5 TD-5 engine.

Contents:

* 1-Flywheel timing pin * 1-Camshaft alignment tool-diesel

* 2-Timing chain tensioner pin * 1-Crankshaft holding tool

* 1-Timing chain compressor

* 1-Injection pump puller

* 1-Injection pump shaft lever

BMW Chain Driven Engine Locking Kit (N43 Petrol 1.6/2.0)

Description:

* This tool kit has been designed to check, adjust and set the Camshaft timing and remove/replace the Cam chain.

* The kit also includes the VANOS plate which is required to set the VANOS sensor in the correct position and the alignment too required to set the balancer shaft.

Applications:

1 series E81 | 82 | 87 | 88 (06-12) 3 series E90 | 91 | 92 | 93 (06-12) 5 series E60 | 61 (07-10)

Engine codes: N43 B16A/AA | N43 B20A | N43 B20AA | N43B20AY | N43 B20KO | N43 B20UO 2006 to current (2012) chain drive engines only.

Petrol Engine Twin Camshaft Setting/ Locking Tool Kit (BMW 16 N40/N45/N45T)

Description:

Applications

BMW N40 and N45(T) Twin Camshaft Petrol engine in BMW

1 Series 116. E81 / E87

3 Series 316i E46 / E90

316Ci. E46

316ti. E46

Content:

VANOS Alignment Plate

Camshaft Setting Plate (Inlet)

Camshaft Setting Plate (Exhaust)

Timing Chain Tensioner Pre-Load Tool

Flywheel Lovking Pin

Camshaft Setting Plate Securing Screw

CH0911231

Petrol Engine Twin Camshaft Setting/Locking Tool Set (BMW N42 /N46)

Applications:

* BMW： -E87118i／120i N46 engine -E46 316i／316ti／318ti-N42 Engine - E90/E91 318i／320i／N46 engine -E85 Z4, 2,0l-N46 engine

*Engine Codes: N42/N46/N46T: B18,B18A,B20,B20A,B20B,B20BD,B20BZ,B2O2

* For adjustment and arresting of the twin camshaft on petrol engines： -Engine timing :Checking and adjustment -VANOS unit : Removal , installation and alignment * Easily accessible operating instructions including cross references to original part numbers * Spare parts optionally available * Clear arrangement of tools in high-quality plastic case with soft foam insert

Description: * Camshaft setting and flywheel locking tools to cover BMW 2.0, 3.0D M47/TU/T2 and M57/TU/T2 diesel engines used in BMW, Land Rover 2.0D,3.0 TD4/TD6, Rover/MG2.0D

CH091118 Diesel Engine Setting Locking Tools (BMW/Vauxhall/ Opel)

CHIH TAI Y&S CO., LTD.

CH091572

BMW Camshaft Alignment Tool

Description:

E-mail: chihtai@ms16.hinet.net

* Includes for setting camshaft timing.

* Applicable: BMW ENGINE MODELS M40 & M70.

CH0911205

BMW Input / Output Camshaft Alignment Tool Set (N62 / N73)

Introduction:

* Suitable for Setting and adjusting the timing on BMW 3.6, 4.0, 4.4, 4.8 N62/N62TU V8 and N73 V12 engines.

* Kit included Camshaft Setting Plates, Flywheel Locking Pin and Chain Pre-tensioning Tool.

CH091193

BMW(N42,N46) Camshaft Alignment Tool

Description:

* Special design to fix the camshaft in TDC engine.

* Applicable: BMW N42,N46

BMW (M62) VANOS TENSIONING BRACKET For screwing in chain tension with top right timing case cover removed Applicable: Engine M62 VANOS

Description: * BMW Mini, Citroen and Peugeot 1.4 and 1.6 16v. Valvetronic / Direct Injection Petrol engines in:

BMW MINI:R55 R56 Cooper S, R55 R56 Cooper, R56 Mini One

CITROEN: C4, C4

PEUGEOT: Picasso 207, 308

Engine BMW: N12(1.4/1.6) and N14 (1.6)

PSA: EP3, EP6 and EP6DT/DTS

Content:

Flywheel Locking Pin

Exhaust Camshaft Setting Plate

Inlet Camshaft Setting Plate (N12/EP3/EP6)

Inlet Camshaft Setting Plate Assembly (N14/EP6DT/DTS)

* BMW engine models M42 & M50: Includes 2 block swivel lock plate & locking pin for setting camshaft timing.

Engine models M40 & M70: Include plate & locking pin for setting camshaft timing. * BMW engine models M60 & M62: Includes 2 block swivel lock plate & locking pin for setting camshaft timing.

CH1214235 BMW Self Adjusting Clutch Fixture & Centering Tool

Description:

* Use to install and set all self adjusting clutches (SAC).

* Use to reset and center the centering ring on self adjusting clutch.

* Applicable: BMW E34, E36, E38, E39, E46, E52, E53, E85, Z3.

CH0911126

Diesel Engine Setting/Locking Tool Set

Description:

* BMW N47 / N47S 2.0d Diesel Engine in: 。 1 Series: 118d(E81/E87), 120d(E81/E82/E87), 123d(E81/E82/E87) 。 3Series: 318d (E90/E91), 320d(E90/E91/E92) 。 5Series: 520d(E60/E61), X3 2.0d: (E83)

* Content: Flywheel locking pin, Camshaft setting plate, Crankshaft turning tool

CH1214372-Z

Flywheel Locking Tool

Description:

* To hold the flywheel for removal and installation. * Suitable for engine: N40, N42, N43, N45(T), N46(T), N51, N52, N53, N54, N62, N73, M47TU, M54, M57T2(TU), S85, W17. * OEM Ref. 11 9 260

Content:

(engine N62, N73)

with washer (M12-40L/60L)

(Engine M57TU2)

E-mail: chihtai@ms16.hinet.net

CH0915248

BMW Flywheel Holder

Description:

* Special designed to fix flywheel when replacing timing chain.

* It helps to release and tighten the central bolts on vibration damper.

* Applicable: BMW M47T2/M47TU/M57T2/M57TU/M67/N45/N45T/N46/N46T/N51/N52 /N53/N54/W17

CH0911187

Drive Shaft Nut Remover and Installer Tool(BMW)

Description:

* This tool is designed for installing and removing the screw nut between rear drive axle and the differential; also can be used to replace the seal of the differential shaft.

Applicable:

* BMW RWD and 4WD series

CH0911225

Benz Timing Chains Riveting Tool Set-Single Row and Double Row

Description:

* Essential tool for timing chain work on Mercedes Benz 1.7D, 2.1D, 2.2D, 2.7D, 3.0D,3.2D, 3.9D and 4.0D CDi diesel engines.

* The link separating tool and the link assembly tool allow for quick and easy separation and assembly of the timing chain.

* May also be used on some Chrysler/Jeep 2.2D, 2.7D and 3.0D CRD diesel engines.

CH0911221

BENZ Engine Timing Tool Set(M651)

Description:

* The retaining device makes it possible to position the camshaft in the installed position, and it is also for turning, installing, and removing the crankshaft pulley.

CH0911120 BENZ (M271) Alignment Tool Kit

Description:

* No.1 for drawing in the timing chain. Retains timing chain with camshaft sprockets in proper timing position.

* No.2 makes it possible to position the camshafts in the installed position.

* No.2 makes it possible to slacken and tighten the bolts attaching the camshaft gear.

* No.3 is to install the plug into the timing case cover (access to chain tensioner).

* No.4 is for unloading the timing chain tensioning device. Release the timing chain.

* Applicable: BENZ (M271)

CH0911113

Engine Timing Tools Set for MERCEDES BENZ / CHRYSLER / JEEP

Description:

* A timing tool set which covers a large of models in the Mercedes range including Petrol and Diesel engines.

* Also suitable for Chrysler PT Cruiser 2.2 CRD and Jeep Grand Cherokee 2.7CRD.

* Set includes Flywheel Plate Locking Tools and Camshaft Locking Pin Set.

CH1214192

Mounting Device for Timing Chain

Description:

(For the 4-cylinder Mercedes petrol engine M111) Description:

* The use of the mounting device allows a single mechanic to replace a timing chain quickly and without any trouble. Application： * C 180/200/220/230；E 200/230；CLK 200/230；SLK 200/230； ML 230

Advantages： * Substantial time savings, only one mechanic required. * No risk of the timing chain falling or skipping a tooth. * Additional time savings on some vehicles where it is not necessary to remove the Radiator

CH0911156

Benz W110/W119 Bias Shaft Pin

Description:

* For holding camshaft tight in installation position.

CHIH TAI Y&S CO., LTD.

CH1214402

E-mail: chihtai@ms16.hinet.net

Camshaft Alignment Tool (Mercedes Benz M112/M113)

Description:

* Design for holding the camshaft in place while working on engine timing for Mercedes M112 or M113 engine.

* OEM ref.:112589003200, 112589013200, 112589000100

CH0812347 Flywheel Locking Tool (Mercedes Benz M133/M270/M607/M651)

Description:

* Used to fix the flywheel gear to remove & install crankshaft pulley center bolt.

* BENZ OEM no. ref.:270 589 00 40 00.

* Application:M133/M270/M607/M651

CH0911244

Timing Tool Kit (Mercedes Benz OM642)

Description:

* This kit is designed to align the camshaft timing angle to correct position.

* Retaining tool for mounting the timing chain to the camshaft sprocket.

Application: M642 in Type 207, 212, 218 except CODE 927

OEM NO. 642 589 00 31 00/642 589 01 40 00 642 589 04 40 00/111 589 03 15 00 112 589 03 40 00

CH0911245 Timing Tool Kit (Mercedes Benz M152,M157,M276,M278)

Description:

* Special designed to align the camshaft timing angle for correct position for Mercedes-Benz

Content: * Camshaft Position Sensor Reluctor Setting Tool * Camshaft Holding Tools * Fuel Injector Puller * T100 Socket

OEM NO. 276589014000 278589002300

Application:

* M152 engine: SLK 55 AMG (R172)

* M157 Engine: M Class (164), R Class (251), CLK (209), E Class (211/212), CLS (219), S Class (221), CL Class (216), C class (204)

* M276 Engine: E-Class(212/207), S-Class(221), CLS(218), SLClass(231), M-Class(166), SLK(172), C-Class(204), GLK (204), R Class (251)

* M278 Engine: S Class (221), CL Class (216), E Class (212/207), CLS (218), SL Class (231), M Class (166), GL Class (166 )

CH0911202 Engine Timing Tools (FORD2.2 TDCi Transit)

Description:

* This kit has been developed specifically for the chain driven 2.2 common rail diesel engines fitted in the Ford Transit from around 2006 with the engine numbers listed below.

* The kit consists of the components required to lock the crankshaft and cam sprockets in their timed position to allow the removal and replacement of the cam chain and associated components.

CH0911201

Engine Timing Set (FORD 1.6VVT)

Description:

* The kit covers the timing belt replacement on Ford 1.6 duratec engine with the variable valve timing.

* The camshaft, the crankshaft and the flywheel pins are also suitable for many other petrol and diesel Ford engines.

* Use to lock the camshaft in the timed position when engine repair or rebuild requiring the cam pulley to be removed and timed.

* For locking the camshaft in the position to allow the variable valve timing pulley to be removed.

* The kit covers later duratec petrol engine, it includes revised design camshaft setting plate and tensioner pulley locking pin, and also covers the completed range of Ford duratec engine 1.25 through 2.0 16v in the both belt and chain drive variant.

E-mail: chihtai@ms16.hinet.net

CH0911212

Engine Service Tool Set (Ford/Fiat/Suzuki/GM)

Description:

* The application list for this product has been compiled cross referencing the OEM Tool Code with the Component Code.

* In most cases the tools are specific to this type of engine and are necessary for Cam belt or chain maintenance.

* If the engine has been identified as an interference engine valve to piston damage will occur if the engine is run with a broken Cam belt.

* A compression check of all cylinders should be performed before removing the cylinder head. Always consult a suitable work shop manual before attempting to change the Cam Belt or Chain.

* The use of these engine timing tools is purely down to the use’s discretion and Eldon Tool and Engineering cannot be held responsible for any damage caused what so ever.

CH091120

Diesel/Petrol Engine Setting/Locking Combination Kit-Ford-Belt/Chain Drive

Description:

* Combination kit of setting and locking tools suitable for wide range of Ford petrol & diesel engines. Also suitable for these engines fitted in Land Rover, Mazda, PSA, Suzuki and Volvo vehicles. Kit consists of camshaft, crankshaft/flywheel and tensioner locking tools, plus camshaft sprocket remover.

* Application Ford Models: C-MAX(07-12), Cougar(98-01), Fiesta(95-12), Focus(98-12), Focus C-MAX(03-07), Fusion(0212),Galaxy(06-12), Grand C-Max(10-12), Kuga(08-12), Maverick(01-07), Mondeo(93-12), Puma(97-02), S-MAX(06-12), Tourneo Connect(02-12), Transit(06-11), Transit Connect(02-12)

CH091185

Engine Timing Tools (Ford 1.8TDDi/TDCi)

Description:

* Timing Tools for Ford 1.8 TDDi / TDCi from 2000 to 2006 including Fiesta / Focus / Cmax /Tourneo / Transit with chain driven engines.

E-mail: chihtai@ms16.hinet.net

CH091578 Timing Tool Kit (FOR 1.8 TURBO & 1.6 FSI chain engines)

Contents:

AUDI A3 1.6 FSI 2003-2006

VOLKSWAGEN GOLF 1.6 FSI TOURAN 1.6 FSI AUDI A3 1.6 FSI 2003-2006 VOLKSWAGEN GOLF 1.6 FSI TOURAN 1.6 FSI

AUDI A3/S3 1.8 TURBO 1996-2003 A4/A6 1.8 TURBO 1994-2006 CABRIOLET 1997-2000 TT 1.8 TURBO 1998-2006

VOLKSWAGEN BEETLE 1.8 TURBO 1999-2006 GOLF/BORA 1.8 TURBO 1997-2005 PASSAT 1.8 TURBO 1996-2005 SHARAN 1.8 TURBO 1997-2006 SEAT LBIZA 1.8 TURBO 1999-2002 CORDOBA 1.8 TURBO LEON 1.8 TUBO 1999-2005 TOLEDO 1.8 TURBO 1999-2005 SKODA OCTAVIA 1.8 TURBO 1996-2005 OCTAVIA 1.8 TURBO 2000-2005 20V RS

AUDI A3/S3 1.8 TURBO 1996-2003 A4/A6 1.8 TURBO 1994-2006 CABRIOLET 1997-2000 TT 1.8 TURBO 1998-2006

VOLKSWAGEN BEETLE 1.8 TURBO 1999-2006 GOLF/BORA 1.8 TURBO 1997-2005 PASSAT 1.8 TURBO 1996-2005 SHARAN 1.8 TURBO 1997-2006 SEAT LBIZA 1.8 TURBO 1999-2002 CORDOBA 1.8 TURBO LEON 1.8 TURBO 1999-2005 TOLEDO 1.8 TURBO 1999-2005 SKODA OCTAVIA 1.8 TURBO 1996-2005 OCTAVIA 1.8 TURBO 2000-2005 20V RS

CHIH TAI Y&S CO., LTD.

CH091567

Engine Timing Tool Set- (Ford / Mazda)

Description:

E-mail: chihtai@ms16.hinet.net

* This comprehensive set of tools enables the correct engine timing to be made when replacing the timing belt.

* Applicable: Ford & Mazda

CH091182

Engine Timing Locking Tool Set (FORD / MAZDE)

Description: * Applicable for FORD 1.8 D/TD/TDCI diesel and 1.25-2.0 16V Zetec petrol engine e.g FORD Fiesta

Fscore /Oruon

Focus

CH091568

CH091161

Puma

Sierra

Modeo

Cougar

Couier/Kombi

P100 and Mazde 121.

* Designed for pulling off the camshaft timing belt wheel and locking or positioning the engine output shafts such as the camshaft and the crankshaft. * Required for changing the timing belt or for engine

FORD Timing Locking Tool Kit

Description:

* Can use for FORD FIESTA, ESCORT, ORION, COURIER, FOCUS, FOCUS C-MAX, MONDEO (1988-2003), FUSION, TRANSIT 1,8 D / TD / TDCI / TDDI 2,0 / 2,4 TDCI / TDDI / 1,4 / 1,6 TDCI.

4Pcs Camshaft Locking Pin Set

Description:

* A special 4 piece kit containing the necessary special pins required to lock the camshaft sprocket, flywheel and align the crankshaft and fuel pump when checking the valve timing on 2.0 and 2.4 litre chain driven engines and or replacing the timing belt on 1.4 litre engines.

* Model:

FIESTA / FUSION 1.4 TDCI 02-04

Mondeo 2.0 TD / TDCI 00-03

Transit 2.4D 00-03

CHIH TAI Y&S CO., LTD.

CH091579

Timing Locking Tools (FORD)

E-mail: chihtai@ms16.hinet.net

Description:

* This five piece set is essential for replacing the cam belt on FORD FOCUS/CMAX 1.6 TI-VCT with engine code HXDA (20032007) PLUS 2.0 TDCI with engine codes G6DA G6DB G6DC 2003-2007.

* Also required flywheel locking tool and adaptors.

CH0911228-2

Setting and Locking Set (FORD/Volvo 1.6 Eco Boost Petrol)

Description:

* Contain the tool required to set and lock the engine along with tensioner locking pin.

* Include the time saving crankshaft pulley alignment tool.

CH091587

FORD Timing Tool Set

Click to view data chart

CH091169

Diesel Engine Setting/ Locking Kit

Description:

* Anodized finish for corrosion

* Instructions for use are printed inside this card.

。 For vehicles without this type of sump pan, use the flywheel TDC setting tool. Secure the tool to the cell housing with the marker point bent in towards the flywheel ting gear. Align the TDC mark on the flywheel with pointer.

。 On vehicles from 1998 on,the injection the injection pump locking pin is required as part of the procedure. With the TDC set up, pass the locking pin through the hole in the timing pump gear and locate it.

E-mail: chihtai@ms16.hinet.net

CH0915409 Subframe Alignment Pins

Description:

* Ensure to align the subframe, suspension and steering components correctly.

Application

* Ford (C-MAX, COUGAR, ESCORT, FIESTA, FOCUS, FUSION, GALAXY, KUGA, MONDEO, ORION, PUMA, S-MAX, TOURNEO CONNECT, TRANSIT, TRANSIT CONNECT, TRANSIT CUSTOM.

* OEM Ref.: 205-316A

CH091162

Description:

* Engine FORD Fiesta 1.8D /Turbo Focus 1.8D Focus2.0D Focus1.6TI * Flywheel Locking Tool

CH0915216 Crankshaft Holding Tool

Description:

* Permits access via a deep socket(not supplied) to each of the pulley blot in turn OEM reference number 303-1310.

CH0911196 Crankshaft Locking Pin for Ford

Description:

* To secure the crankshaft via the flywheel, designed to lock the crankshaft via the flywheel in its “timed” position when replacing the camshaft drive chain or for checking the engine timing.

* OEM ref. 303-1562

Application:

E-mail: chihtai@ms16.hinet.net

CH1214419 Ford Engine Bracket Screw Socket

Description:

* To remove/install the front engine mount in a 2.0L EcoBlue diesel.

* 1/2”drive.

Application:

* Transit custom 2012~, Mondeo 2014~, Galaxy 2015~, S-Max 2015~, Edge 2016~, Focus 2019~, Kuga 2019~

* OEM Ref.: 303~1694

CH0911246

V-Ribbed Belt Tensioner Tool Set (for Citroen, Peugeot, Fiat, Ford 1.4L & 1.6L Diesel)

Description:

* Facilitates the pre-tensioning and locking of V-ribbed belt tensioners.

* For the removal / installation of the V-ribbed belt in - situ on the vehicle even in very limited space condition.

* Suitable for Citroën / Peugeot / Fiat / Ford 1.4L and 1.6L diesel engines.

Application:

* Citroën, Peugeot, Ford & Fiat 1.4 & 1.6 diesel engines.

* Citroën: Berlingo, C1, C2, C3, C3 Picasso, C3 Pluriel, C4, C4 Picasso, C5, DS3, DS4, Xsara & Xsara Picasso.

* Peugeot: Partner III, 206, 207, 308, 508, 3008, 5008.

* Engines covered include DV4 & DV6 engines.

* Engines: 1.4-1.6D

* OEM No.: 0188-Z , G.0194-E3

CH0911210

Engine Timing Tools for Vauxhall/ Opel

Description:

* Setting & Locking Kit that covers a wide range of Vauxhall/Opel and Chevrolet petrol engines.

* Includes the necessary tools for setting and locking the camshafts and crankshaft, and pins for locking the timing chain tensioner.

CHIH TAI Y&S CO., LTD.

CH0911220

CH091163

CH091135

E-mail: chihtai@ms16.hinet.net

Diesel Timing Kit (Vauxhall/ Opel & Suzuki 1.3 CDTI/D/DDIS)

Description:

* Suitable for setting the camshaft and crankshaft, on Vauxhall/Opel and Suzuki chain drive 1.3 diesel engines. Set also includes a tensioner locking pin.

* To prevent the engine shafts (e.g. camshafts, crankshaft) from turning or to keep them in a specific position and to adjust the timing belt tensioner when changing a timing belt or during other engine repairs.

Application-Model:

* VAUXHALL/OPEL: Agila/Corsa/Combo (03-08), Astra-H (05-08), Meriva/Tigra-B (04-08)

* SUZUKI: Ignis/Wagon R (03-08), Swift (04-08)

* ENGINE CODES: Z13DT, Z13DTH, Z13DTJ

Petrol 1.0,1.2,1.4 Twin Cams(Chain)

Description:

* Models: CORSA, AGOLA, ASTRA,MERIVA (97-04)

* Engines:1.0 12V., 1.0 16V, 1.4 16V(chain).

* Codes: X10XE, ZI0XE, Z10XEP,X12XE, Z12XE, Z14XEP.

Petrol 1.0, 1.2, 1.4 Twin Cams (Chain)

Description:

* Models: CORSA, AGOLA, ASTRA, MERIVA (97-04)

* Engines: 1.0 12V., 1.0 16V, 1.4 16V(chain).

* Codes: X10XE, ZI0XE, Z10XEP, X12XE, Z12XE, Z14XEP.

Description:

* This set can use for CLIO, MEGANE, SCENIC LAGUNA, ESPACE, KANGOO TRAFIC & MASTER (99-04) ENGINE: 1.5, 1.9, 2.2 & 2.5 DCI.

CH091171

G9U CH0911131

Codes: K9K

G9T

G9T

CH0911229

E-mail: chihtai@ms16.hinet.net

Diesel Engine Setting/ Locking Tool Kit (Renault/Nissan &Vauxhall/Opel 1.6/2.0/2.3DCI)

Description:

* Suitable for setting and locking 1.6 & 2.0 & 2.3 DCi/CDTi chain drive engines fit in Renault, Nissan and Vauxhall/Opel models with M9R/M9T engine code.

CH091172

Diesel Engine Setting/Locking Tool Kit (Opel 1.9 CDTI)

Description:

* Applicable for Opel 1.9 CDTI diesel engines (Z19DT， Z19DTH)e.g. Opel Vectra Signum etc.

* To prevent the engine shafts (e.g. camshaft, crankshaft) form turning or to keep them in a specific position and to adjust the timing belt tensioner when changing a timing belt or during other engine repairs.

CH091172-1

Diesel Timing Tools (Vauxhall/ Opel 1.9 CDTI)

Description:

* Applicable for Opel 1.9 CDTI diesel engines(Z19DT， Z19DTH)e.g. Opel Vectra, Signum etc.

* To prevent the engine shafts (e.g. camshaft, crankshaft) form turning or to keep them in a specific position and to adjust the timing belt tensioner when changing a timing belt or during other engine repairs.

CHIH TAI Y&S CO., LTD.

CH0911193 Engine Timing Tool (Opel/Vauxhall)

Description:

E-mail: chihtai@ms16.hinet.net

* 2.0 CDTi timing belt tool kit for OPEL/Vauxhall to remove and replace the camshaft drive belt.

* This kit also contains the tool required lock the flywheel on vehicles fitted with automatic transmission.

* For replacement of the camshaft drive chain in the cylinder head additional tooling with be required- CH0911194.

CHIH TAI Y&S CO., LTD.

CH0911204

CH091564

CH091181

CH0911134

E-mail: chihtai@ms16.hinet.net

Diesel Engine Setting/ Locking Set (Renault/ Nissan/ Vauxhall/ Opel)

Description:

* Suitable for setting and locking 2.0 & 2.3dCi/CDTi chain drive engines fitted in Renault, Nissan and Vauxhall/Opel models with most M9R/M9T engine codes

Engine Timing Tool Set (Citroen /Peugeot)

Description:

* This comprehensive set tools enable the correct engine timing to be made when replacing the timing belt.

* Suitable for using on the most recent cars with either HPI (RETROL) O

Engine Timing Tool Set (Citroen /Peugeot)

Description:

* This comprehensive set of tools correct engine timing to be made replacing the timing belt. Suitable for use on the most recent cars with either HPI(PETROL) or HDI(DIESEL) engines.

* Applicable: Citroen and Peugeot Twin Cam 16V Petrol engine code “ ew ” (EW7J4，EW10J4，EW10J4, EW12J4).

* Citroen: Xsara/Picasso C4，C5，Evasion/Synergie Jumpy/Dispatch

* Peugeot：206，307，406/Coupe

Timing Tools (Citroen-Peugeot DW8-DW10-DW12 (HDI) Engines)

Description:

* This comprehensive tool kit is used for correct engine timing when replacing the timing belt.

* Suitable for use on most popular cars with either petrol or diesel engines.

E-mail: chihtai@ms16.hinet.net

CH091577 Engine Timing Tensioner Kit

Description:

* This set can use for ALFA ROMEO, FIAT, CITROEN, PEUGEOT, RENAULT, VOLKSWAGEN.

* A comprehensive range of tension lever and wrenches required for changing the cam belt on most popular petrol and diesel engines.

CH091117

Petrol Setting/ Locking Tool Kit (FLAT 8V)

Description:

* Kit consists of crankshaft locking tool, camshaft setting plate and belt tensioner adjuster for the 1.2engine, and additional sprocket locking tool and alignment fixture for the camshaft on the 1.4 WT engine Supplied with comprehensive instructions and carry-case.

* Models:New 500 (07-08), Idea (04-08), Linea (07-08), Grande Punto (07-08), Doblo (05-08), Panda EV02 (05-08)

* Engines: 1.2 8v-169a4.000. 199A4.000 ,1.2 8v-169a4.000-EV02 Only, 1.4 16v-350A1.000

CH0911116

Petrol Setting/Locking Tool Kit (FIAT 8V)

Description:

* Kit consists of crankshaft locking tool, camshaft setting plate and belt tensioner adjuster for the 1.2 engine, and additional sprocket locking tool and alignment fixture for the camshaft on the 1.4 VVT engine. Supplied with comprehensive instructions and carry-case.

* Models: New 500(07-08) Idea(04-08) Linda(07-08) Grande Punto(07-08) Doblo(05-08) Panda EV02(05-08)

* Engines: 1.2 8V-169A4000, 199A4.000 1.2 8V-188A4000-EV02 Only 1.4 16V-350A1.000

* All tools and parts within these kits are available separately.

CH0911106

Timing Devices FIAT 1.9 JTD 16V Multijet Engine

Description:

* Tool to fit onto the crankshaft pulley to stop the crankshaft rotating. When the tool is secured in position, the first piston stops at the TDC position.

* Flywheel locking tool

* Camshaft locking pins. When the plugs placed laterally to the valve housings are removed and the pins are inserted into the slots on the camshafts, the camshafts will be locked in the timing position.

CH091177 Engine Timing Tools Set (FIAT/IVECO/PSA/FORD)

Description: * For engine 2.2L，2.3L，3.0L * Car models：new Fiat Ducato，Iveco，Dayli，Ford Transit Van

Peugeot Boxer，Citroen Jumper equipped with these motors.

CH091112

Engine Timing Tool Set (FIAT)

Description:

* Petrol Engines： FIAT Brava, Bravo, Barchetta, Cargo, Coupe,Marea, Palio, Weekend, Punto, Multipla, Stilo,ldea Doble, Twin Can Engines 1.2 1.4 1.6 1.8 16V * Diesel Engines： FIAT Brava, Bravo, Marea/Weekend,Palio, Punto.Multipla, Doblo, Ulysse, Ducato, Stili JTD Diese Engines 1.9D/TD 1.9JTD 2.4TD/JTD

CH091186-1 Engine Timing Tool Set (FIAT/ Alfa Romeo//Lancia)

Description: * Suitable For：Alfa Romeo vehicle with 1.4；1.6；1.8；2.0； 3.0L。4- and 6-cylinder engine Alfa Romeo 145

Spider GT and Fiat / Lancia vehicle with 1.2；1.4；1.6；1.8；2.0L 4- and 5-cylinder engine。 Fiat Panda

Palio

Marea

CH091113 Engine Timing Locking Tool Set (Alfa Romeo)

GTV

Stilo

Description: * Applicable for Alfa Romeo Twin Spark 1.4;1.6; 1.8; and 2.0L 16V Twin Cam petrol engines (Engine code: 162.01,322.01,323.01,323.10,335.03,671.06,672.04 and676.01) e,g. Alfa Romeo 145,146,147,155,156,166, Spider and GTV * To prevent the engine shafts (e.g. camshafts, crankshaft)form turning or to keep them in a specific position when chaning a timing belt or during other engine repairs

CHIH TAI Y&S CO., LTD.

CH091186

E-mail: chihtai@ms16.hinet.net

Engine Timing Tool Set (FIAT/ Alfa Romeo/Lancia)

Description:

* 23 adapters ,1pc tool for variable valve timing rotation, 1pc tool for TDC.

CH091123

Engine Timing Tool Set (FIAT/ Opel)

Description:

* This timing tool kit is specifically designed for FIAT chain engines fitted to the very lates Vauxhall/Opel 1.3 and 1.9 CDTI models(2004 onwards)

CH091178

Timing Assortment FIAT Multijet (FIAT 1.3 Multijet Engines)

Description: * FIAT-LINCIA 1.3 MULTIJET / OPEL 1.3 CDTI

assortment for HYUNDAI, MAZDA, MITSUBISHI HYUNDAI： SONATA.

MAZDA： 626, 323, PREMACY

MITSUBISHI：CARISMA, SPACE STAR,SPACE WAGON, GALANT, SIGMA, PAJERO.

CH091582

Engine Timing Locking Tool Set

Description:

* A comprehensive 16 piece set of engine timing locking tools for camshaft, crankshaft and flywheel. * Application: CITROEN, FIAT, FORD, OPEL, PEUGEOT, RENAULT, ROVER, VAUXHALL, VOLKSWAGEN.

CH091166

Engine Timing Tool (Petrol 2.2 16V chain)

Description:

* Applicable for OPEL TwinCam 2.2 16V petrol engines (Z22SE) e.g.Astra

Signum，Speedster，Vectra and Zafira etc. * To lock or position the camshaft and the timing chain tensioner during engine repairs.

CH091174

Engine Timing Tool Set (Opel/Vauxhall)

Description:

* This tool set allows the precise location of the crankshaft in the TDC-Position against the fly-wheel. * TDC-Locking Tool for Crankshaft

Application: Astra 1,7 D up to `97

Adjusting Tool for the TDC-Marking on the flywheel. * Locking Pin for Flywheel/Crankshaft

Application: Astra 1,7 D from `98

Pin fir locking the crankshaft in the TDC-Position. * Locking Tool for Flywheels 。 Application: Opel/Vauxhall Diesel-Engines (Isuzu)

With 1,5 and 1,7 and for Opel/Vauxhall Fuel-Engines(OHC) from 1,2 to 2,0﹒

CH091173

Camshaft Locking Tool (Opel)

Description:

* Astra F 1.6/1.7D/DT * Astra G 1.7D * Astra Max 1.6/1.7D * Astra Van 1.6/1.7D * Ascona C 1.6D * Belmont 1.6/1.7D/DT * Cavalier 1.6/1.7D * Kadett E 1.6/1.7D * Vectra A 1.7D

CH0911110

Flywheel Locking Tool (OPEL VAUXHALL 1.8 / 2.0)

Description:

* For locking the flywheel when changing the cam belt * Applications：OPEL Vauxhall 1.8 / 2.0

CHIH TAI Y&S CO., LTD.

CH0911104

Engine Timing Tool Kit

Description:

CH0915420

CH091158

CH1214356

E-mail: chihtai@ms16.hinet.net

* Vauxhall/Opel Astra-G, Astra-H Meriva(VXR) Zafira-B 1.6 16V

Timing Chain Wedge (Chrysler 4.7L V8)

Description:

* Tool locks the timing chains against the hydraulic tensioners to prevent tensioner ratcheting and piston extension during service procedures

* Applications: 4.7L(PowerTech) V8

Timing Belt Tensioner (Citroen/Peugeot)

Description:

* This timing belt tensioner is designed specifically for later models of CITROEN / PEUGEOT models.

Timing Belt Tensioner Tool(JTD Multijet)

Description:

* Simplified tensioning of the timing belt via the tensioner roller.

E-mail: chihtai@ms16.hinet.net

CH091596

Diesel Engine Timing Locking Tool Kit

Description:

* This kit can use for PSA2.5, FLAT 2.8D, IVECO, RENAULTAND VAUXHALL. Include 2PCS setting pin, 1PC flywheel locking pin and 1PC tensioner retaining tool.

Back Models:

1.Also for CITROEN/PEUGEOT,FIAT AND IVECO models TRAFIC(80-00),MASTER(80-07),MASCOT(99-07).

2.FIAT, PSA, RENAULT MODELS DAILY(91-05),TURBO DAILY(94-00).

3.RELAY/JUMPER(01-02),BOXER(00-06).

4.ARENA(97-01),MOVANO(98-03),VANS.

CH0911124

ALFA ROMEO / FIAT Timing Tool Set

Description:

* Maintenance timing chain and engine repair of all tools, can be locked and positioning crankshaft, camshaft, and adjust the belt tension. It can lock or locate Multiple different camshaft.

* Suitable for Alfa Romeo Twin Spark petrol engines 1.4, 1.6, 1.8, 2.0 and 2.0 JTS (engine code: 335.03, 321.02, 321.03, 321.04, 372.03 [105PS], 676.01, 322.01, 322.05, 671.06, 162.01, 323.01, 323.10, 341.03, 363.01, 672.04, 932A2.000, 937A1.000) eg Alfa Romeo 145, 146, 147, 155, 156, 166, Spider, GTV, GT and Fiat 1.8 16v twin cam petrol engines., 2.0 20v., 2.4 20v. (Engine code: 182A2.000, 183A1.000, 183A6.000, 188A6.000, 192A4.000, 175A3.000, 182.A1.000, 183B3.000, 182B7.000, 192A2.000) eg Punto, Brava, Bravo, Marea, Weekend, Barchetta, Coupe, Stilo.

CH091194

(FLAT 1.9D/TD)

E-mail: chihtai@ms16.hinet.net

CH091195

Petrol Engine Locking Tool Set (FIAT 1.8/2.0)

Description:

* For use on the popular petrol engines to enable the timing pulleys to be locked into place whilst servicing the camshaft and cam-belt replacement.

* Fiat Ulysee 1.8/2.0 Turbo Ducato 2.0 * Content:

Crankshaft Timing Pin 6mm

Camshaft/Crankshaft Timing Pins(2)

Camshaft Timing Pins(2)

Tensioning Tool

CH0911105

Diesel Engine Timing Tool Set (FIAT 2.3 JTD)

Description:

* An engine timing locking tool set Fiat Ducato 2.3JDT This kit includes the latest Crankshaft Timing Pin required from 2006-2008. * The 2.3 JTD twin camshaft Common Rail diesel engine is belt driven between crankshaft and inlet camshaft but utilises a chain to connect both camshaft. The high pressure fuel pump does not require timing. Follow all the manufacturers` specified procedures in preparation to remove the worn or damaged timing belt.

* F1AE0481C, F1AE0481D, F1AE0481N 2002 – 2008

CH091175

2PCS Locking Tool Set

Description:

* This Tool Set can be used for locking the camshaft wheels together. Therefore preventing the camshaft from turning whiles the gear belt is removed. * Consists of:

Locking extractor for camshaft OPEL1.4 / 1.6L 16V

Locking extractor for camshaft OPEL1.8L 16V / 2.0L 16V

CH091176 8PCS Locking Tool Set

Description:

* For holding camshaft in place. * Application: VAUXHALL,OPEL . ASSB, ROVER, XSARA,ISUZU.

CH0911100

CH1214377

CH0911114

E-mail: chihtai@ms16.hinet.net

Diesel Engine Locking Tool Set for FIAT 1.7D/1.7TD 1.9D 1.9TD

Description:

Vehicle Year Component Engine Codes Punto 1.7D Punto1.7TD 1996-1997 Camshaft Locking Tool-A Camshaft Locking Tool-B

Tipo 1.9D Tempra 1.9D Ducato 1.9D

1987-1998 Camshaft Locking Tool-A Camshaft Locking Tool-B

Tipo 1.9 TD Tempra 1.9TD

1987-1998 Camshaft Locking Tool –A Camshaft Locking Tool – B

176 B3.000 176 A3.000 176 A5.000

149 B1.000 160 A6.000 160 A7.000 160 D1.000 230 A2.000 230 A3.000 230 A4.000 280 A1.000

149 B1.000 160 A6.000 160 D1.000 230 A2.000 230 A3.000 230 A4.000 280 A1.000

* Applicale：FIAT Punto 1.7D/TD Tipo 1.9D/Ducato 1.9D/Tempra 1.9D Tipo 1.9TD/Ducato 19TD/Tempra 1.9TD diesel engines with an adjustable camshaft timing belt pulley.

Camshaft Holding Tool(1.3 Diesel 16V)

Description:

* For counter holding the camshafts during engine timing, setting and adjustment procedures.

* OEM Ref.: Fiat 1.871.008.600, Ford 303-1475, Suzuki 0991768221, Peugeot/Citroen 0104-B

Description:

* Tensioning tool for clockwise/anti clockwise tensioners. * OEM 1 860 638 000. For use on Ducato 2.8D 1997-2002 & 2.8 JTD 2000-2004 with engine codes 8140.63, 8140.43

CHIH TAI Y&S CO., LTD.

E-mail: chihtai@ms16.hinet.net

CH091167 Attrezzo Messa in Fase Tool for Camshaft Regulation

Description:

* Renauft espace 2.2

* DCI-master2.2 / 2.5 DCI

CH0911190

Flywheel/Front Pulley Locking tool Set(Renault/Nissan)

Description:

* This product provides locking for the Renault engine flywheel and front pulley.

* The product also provides the key tools for Renault dual cam 1.4, 1.6, 2.0, 2.5 and 3.5 liter petrol engines for timing chain replacement.

CH091573 Engine Timing Tool Set - Renault

Description:

* This new camshaft pulley setting tool holds two pulleys in place while changing the cam belt and correct engine timing to be performed when changing the timing belt.

* Applicable: RENAULT 16V & K4J, K4M & F4P, F4R.

CH091571

Timing Tool Kit (Renault)

Description:

* This comprehensive set of tools enables the correct engine timing to be held when servicing renault engines.

* Application:

E-mail: chihtai@ms16.hinet.net

CH091535 Timing Tool

Description:

* For RENAULT CLIO │MEGANE│ LAGUNA KANGOO 1.9 DTI ENGINES.

CH091580

Timing Locking Tools

Description:

* Can use for RENAULT LAGUNA 2.0 IDE (2001-2005) F5R ENGINE.

CH091149

Engine Camshaft Sprocket Locking Device for RENAULT 1.8 / 2.0 16V

Description:

* Engine Camshaft Sprocket Locking Device Updated timing belt replacement procedures for the engines detailed below, require examination of the crankshaft to determine acceptance of the new crank gear with integral Woodruff key and release of the camshaft sprocket bolts requiring use of Locking Device.

* Applications：RENAULT 1.8 16V. F4P 770/722/770/771/772/773/774/775 2.0 16V. F4R 700/701/712/713/714/715/720/730/732/736/738/740/7 41/744/746/747/760/761/762/763/764/765/766/767/770/ 771/774/776/784/786/787/790/792/794/795/797/830

CH0911137

Petrol Engine Twin Camshaft Setting/Locking Tool Kits

Description:

* The full kit incorporating the timing tools required for all K4J/K4M/F4P/F4R 1.4,1.6 1.8,2.0(t)16v petrol engines, and also covers K9K 1.5dci diesel engines.

* Applications: RENAULT 1.4,1.6,1.8,2.0 16v Twin Camshaft petrol engines in: Clio Modus Megane / Scenic/ Laguna Kangoo / K4J/K4M 1.4&1.6 16V.engines /Clio Megane / Scenic Laguna Espace Trafic /F4P/ F4R (t)1.8 &2.0 16v.engines.

CH0911227-3

Volvo Timing Tool Set(T4, T5)

Description:

* Develop specifically for 1.6 direct injection petrol engine fitted with variable valve timing (VVT) and found in both Ford and Volvo range.

* To adjust and fix the angle of the camshaft and the crankshaft.

E-mail: chihtai@ms16.hinet.net

CH0911227-2 Volvo Timing Tool Set

Description:

* The comprehensive the setting and locking kit covers the engine which is fitted to a large range of Ford, Volvo and some Mazda vehicle.

* Contain the time saving tool to correctly align the timing cover on Ford and Volvo engines and the crankshaft pulley holder for Mazda engine.

CH091125

Camshaft/ crankshaft Alignment Tool

Description:

* For alignment of the cam and crankshafts.

* Also enables correct installation of the camshafts with the cam cover.

* Applicable: VOLVO models 850,960,S40,S70 and S90.

CH1308186

Volvo Camshaft Locking Tool

Description:

* Misalignment of the cam shafts during a timing belt replacement in the 5 cylinder engines can be a costly mistake.

* Our cam locking tool holds the camshafts in place during timing belt replacement to prevent unexpected movement and ensure proper cam shaft alignment.

* Made from 3/8 inch anodized aluminum plate with 3/16 inch dowel pins spaced for placement in between the intake and exhaust cam gears.

* This tool will work on 1998 and earlier models without CVVT (constant variable valve timing) only.

CH0911214

Jaguar/Land Rover (V8) 5.0L Petrol Timing Tools

Description:

* Timing tool camshaft alignment, to lock the ring gear.

* To tension the VVT during the timing procedure

* A1484-4 to allow camshafts to be rocked for installation of 1

* Application: X150 – XK (10MY),X250 – XF (10MY), X351 – XJ (10MY)

E-mail: chihtai@ms16.hinet.net

CH0812187

Crankshaft Trigger Wheel Installer

Description:

* Tool for installing the crankshaft trigger wheel.

* Approximate dimensions: Overall diameter 12.5cm(4.9").

* Application range: Discovery 3, Discovery 4 and Range Rover Sport when fitted with the TDV6 engine.

* Ref: 303-1130

CH0911118

13PPcs Petrol Engine Timing Set-Rover KV6

Description:

* For use when replacing engine timing belts: 2.0 V6 & 2.5 V6 (1999-2005) Rover 45 75 / 160 180 190 / 825 / MG ZS MG ZT / ZT-T / Land Rover Freelander 2.5 * N.B. not suitable for MG ZT / ZT-T 190 models

* Content:

Camshaft Locking Tools x 2

Cam Tool Adaptors 2.0 V6 x 2

Cam Tool Adaptors 2.5 V6 x 2

Rear Cam Sprocket Setting Tool

Tensioner Pushrod Retension Pin

Rear Cam Sprocket Setting Tool

Rear Cam Sprocket Guide Pins x 2

Crankshaft Setting Pin

Rear Cam Sprocket Spreader

CH0911247

Camshaft Timing Tool Kit (For Jaguar Land Rover)

Description:

* For locking the engine into the timed position so the engine timing chain can be removed/replaced and the engine timing checked.

* Tool should be used with a fuel pump locking tool

Applications

* Jaguar F pace, XE, XF (2015 onwards).

* Land Rover Discovery Sport, Range Rover Evoque (2015 onwards)

* Engine codes: AJ-200D, 204DT, AJ200D, AJ200, 204DTD

* OEM NO.:JLR-303-1635, JLR-303-1636, JLR-303-1630

CH0911248

Diesel

Engine Timing Kit (Land Rover Evoque 4.4 V8)

Description:

* Setting and locking kit for Range Rover V8 3.6 / 4.4 .Kit includes a flywheel locking plate and camshaft rotating pin

* OEM NO. JLR-303-1568/303-1620/303-1571/303-1243

CHIH TAI Y&S CO., LTD.

CH091129

Engine Timing Tools (GM)

Description:

E-mail: chihtai@ms16.hinet.net

* Applications: VUAXHALL/OPEL 。 VECTRA 2.0D TURBO. 。 SINTRA 2.2D TURBO. 。 ZAFIRA 2.0D TURBO. 。 FRONTERA-B 2.2D TURBO. 。 SAAB 9-3 2.2D TURBO.

* This set of timing tools engines the correct timing position to Be made when servicing GM Ecotec2.0 engines.

CH091562

Timing Tool Kit (GM1.3 CDTI Diesel Engine)

Description:

* The set use for GM1.3 CDTI diesel engine.

* The Kit include flywheel locking pin, camshaft setting tools, tensioner locking pin.

CH091126

Engine Timing Tool Set (V6 GM / SAAB 3.0L and 3.2L)

Description:

* Engine timing tools set for General Motors/SAAB V6 petrol engines. (Crankshaft and Camshaft Locking Tools sold separately。

* Application: 2002-2003 3.2L VIN N used in Cadillac CTS 19972001 3.0L VIN R used in Cadillac Catera 2001-2007 3.0L VIN R used in Saturn L300 & LW300 1996-2003 3.0L used in SAAB 9.5

CH091591

Engine Timing Tool Kit

Application:

* This set can use for GM/SAAB V6 Petrol engines.

CH091160

Engine Timing Tools-GM

Description:

* Ford 1.8 Duratec

E-mail: chihtai@ms16.hinet.net

CH0312201

Crankshaft Turning Socket (Chevy Big Block)

Description:

* 1/2”drive for using with breaker bar or drive ratchet.

* This non-marring, aluminum tool rotates the crankshaft the proper way, when the balancer is off

CH0915407

Subaru Crankshaft Socket

Description:

* Used to align the crank to T.D.C. while working with the timing chain.

* Also works on older 3 or 6 cylinder DOHC engines.

Application:

* Subaru-BRZ 2013-2015, Subaru-forester 2012-2015, Subaruimpreza 2012-2015, Subaru-impreza wrx 2015, Subaru-legacy 2013-2015, Subaru-outback 2013-2015, Subaru-outback(6 cyl.) 2006, Subaru-tribeca B9 2006, Subaru-tribeca B9 2006, SubaruXV cross trek 2013-2015

CH0911128

Engine Timing Tool Kit for HONDA, MAZDA

Description:

* For Honda, Mazda, Subaru, Hyundai, Daewoo, Chevrolet.

* Important kit when working on the motor,e.g.. timing belt, general motor settings, camshafts.

CH0911129

Engine Timing Tool Kit for TOYOTA, MITSUBISHI

Description:

* For Toyota, Mitsubishi

* Important kit when working on the motor,e.g.. timing belt, general motor settings, camshafts.

CH0915213

Axle Lock Nut Remover/Install Kit

Description:

* For TOYOTA/LEXUS axle lock nut.

* 1pc pvy tool for unlock the lock nut from axle.

* 1pc lock tool for lock the nut from axle.

* Suitable for most of car as below: 。 TOYOTA:AVALON 200, LATER CAMRY 2002, LATER COROLLA 2003 , LATER PRIUS 2001 ,LATER SIENNA 2002, LATER SOLARA 2004, LATER. 。 LEXUS:ES300 2002-2003 ,ES330 2004-2006 ,ES350 2007&LATER RX300 1999-2003, RX330 20042006 ,RX350 2007,&LATER and other vehicles with 30 mm axle lock crush nuts.

CH0915213-A

Axle Lock Crush Nut Tool

Description:

* For axle lock crush nut use.

* 1pc pry tool for unlock the lock nut from axle.

* 1pc lock tools for lock the nut from axle.

CH0911136 Engine Timing Tool Kit for Honda

Description:

* No.1.extennsion handle- Honda No.:07-JAB-001020B

* No.2.pulley holder tool6-pt- Honda No.:07-MAB-PY-30100

* No.3.tool holder-Honda no.:JAB-0010100

CHIH TAI Y&S CO., LTD.

CH200892 Mitsubishi Pulley Timing Tool

Description:

E-mail: chihtai@ms16.hinet.net

* Design for changing the pulley on Mitsubishi.

* Size: 1/4”dr. x Pin dia.3.0mm.

CH1214362

Flywheel Locking Tool(Hyundai/ Kia)

Description:

* To hold the flywheel when removing or installing the crankshaft damper pulley.

* Install the locking tool to jold the flywheel after removing the starter.

* OEM Ref. 09231-2B100

Application:

* i30(FDe), i30(GDe), i40(VF), i10(IA), i20(PB), Santa Fe(DM), ix35(EL), ix20(JC), iLoad(TQ)

Engine Code:

* D1.1 TCI-U2, D1.4 TCI-U2, D1.6 TCI-U2, D1.7 TCI-U2, D2.0 TCIR(low power), D2.0 TCI-R, D2.2 TCI-R, G1.2 DOHC, G1.4 DOHC, G1.4 MPI, G1.6 DOHC, G1.6 GDI, G1.6 MPI, G2.0 DOHC, G2.7 DOHC, G1.6 T-GDI, G2.5 TCI-A2

E-mail: chihtai@ms16.hinet.net

CH050314 Engine Calibration and Set-up Kit

Description:

* Use in the Hemi-type engines.

* Easily find the TDC compression stroke.

* Just listen on the whistle alert.

* Gauge Indicated (optional assembly)

* Give you unmistakably clear result to display piston movement.

CH091570

Diesel Fuel Pump Timing Set

Description:

* This precision measuring instrument is designed for resetting the timing position on diesel engines with the following fuel pumps BOSCH/EP/VE ROTORY,KIKKI, NIPPON, DENSO, CAV ROTODIESEL, Top entry these fuel pumps will be found on the following vehicles with diesel engines.

CH121460-1

Clutch Alignment Tool

Description:

* Faster, easier replacement of clutches.

* Align clutch plates and pilot bearing accurately.

* Shaft and bushings provide an accurate fit for eight pilot bearing sizes. Two turned size (1" and 1-1/8") fit 90% of the clutch plates and cone handles the rest.

* Shaft and bushings to fit 8 pilot bearing sizes: 0.590", 0.612", 0.624", 0.668”, 0.749", 0.786", 0.808",0.984”.

CH121460-M

Metric Clutch Alignment Tool

Description:

* Faster, easier replacement or repair of clutches.

* Plate aligning cone with graduated diameters fit of most clutch plates.

* Tapered cone to fit all others.

* Shaft and bushing to fit 10 pilot bearing sizes: 12,12.6,14,15,15.8,16,17,18,19,20mm

E-mail: chihtai@ms16.hinet.net

CH1308196

Clutch Aligner Set

Description:

* Universal Clutch Aligner For hub-Ø: 15 - 28 mm

* Because of the parallel expanding technology it is possible to centre the clutch plate to the clutch pressure plate or to the flywheel.

* The clutch aligner kit contains centering sleeves with Ø 12, 14, 15, 16, 17, 18, 19 and 20 mm.

* For trucks with single or double disc clutches (universal)

* The tool allows the correct alignment of single or double disc clutches of trucks and tractors to the engine.

* Mandrel No.1 is applicable on interior clutch hub-Ø from 36 - 45 mm.

* Mandrel No. 2 is applicable on interior clutch hub-Ø 42 -52 mm inside.

* The clutch aligner kit contains centering sleeves with Ø 20, 25, 27 and 30 mm.

CH1214202

Universal Clutch Alignment Tool Kit

Description:

* Align the clutch disc either relative to clutch pressure plate or via the pilot bearing relative to flywheel.

* For single/ two disc clutches (clutch hub dia.15-26mm )

* For passenger cars and light commercial vehicles.

* For vehicles with/ without pilot bearings.

CH1308216

Contents:

* 1pc mandrel, dia.:15-19mm

* 1pc spindle, length: 100mm

* 1pc clutch disc aligning adaptor, dia.:19-30mm

* 1pc mandrel, dia.:20-26mm

* 1pcs spindle, length: 150mm

* 1pc clutch disc aligning adaptor, dia.:26-35mm

* 1pc clutch plate aligning adaptor, dia.:29-69mm

* 1pc pilot bearing extension adaptor, length: 20mm

* 1pc spindle, length:55mm

* 1pc pilot bearing adaptor, dia.:10,12,14,15,16,17,19,25,27,30mm

Chrysler Transmission Dipstick

Description:

* Use on 6F24 automatic transmissions found on Late model 2012 and up Dodge Dart, Fiat 500, Jeep Cherokee, Compass & Patriot.

* Knurled handle, Tapered end.

CHIH TAI Y&S CO., LTD.

CH121407-3040

CH1214382-Z

CH1308211

E-mail: chihtai@ms16.hinet.net

Complete Kit For Assembling And Disassembly Of Self Adjusting Clutches(3 and 4 hole pitch)

Description:

* Suitable for most Self Adjusting Clutches SAC(3 and 4 holes) equipped on vehicles of FIAT GROUP, VW-AUDI, BMW, MERCEDES, VOLVO, OPEL, RENAULT etc.

* Allows operations on clutch equipped with this device in order to prevent any damage to system and to keep adapter ring in right position.

Advantages

：

* Pre-tightening of disk pushing plate during assembly and disassembly avoiding clutch deformation.

* Alignment of clutch disk to drive bearing or to disk pushing plate.

* Material：Aluminum.

Transmission Gear Puller (VAG)

Description:

* For pulling off the selector gear with synchronizer hub on 5 speed manual gearbox 0A4 and 6 speed manual gearbox 02S

Application:

* OEM Ref.: T10309A

* VW: Beetle, Caddy, Eos, Golf, Jetta, Passat, Polo, Scirocco, Touran, etc.

* Audi: A3, TT, etc.

* Skoda: Fabia, Octavia, Superb, Yeti, etc.

* Seat: Altea, Leon, Toledo, etc.

Description:

* Designed to disconnect transmission cooler lines.

* Two size 3/8” and 1/2”.

* 3/8”dr. size for 2003 and later Ford V8 Explorer, 2004 and later Ford F150 and Cadillac CS

* 1/2”dr size for Ford Super Duty Trucks, F250, F350 and F450

E-mail: chihtai@ms16.hinet.net

CH0812239 Gear Puller (Ford)

Description:

* Fast and simple method of removing the fifth gear on Ford front wheel drive transmissions before carrying out internal repairs.

* The split collar and retaining sleeve ensures a safe and positive location.

Applications:

* B5 Gearboxes: Manual 5 speed fifth gear puller (pre -1995)

* IB5 from 1995 – present: Fiesta to date

/ Ka 1 1996 – 2008 /Focus 1

* MTX-75: Focus 1, 2 & 3 from Zetec onwards to date (inc C Max 1) / Mondeo

/ Jaguar X Type

* VXT-75: Galaxy 1 1995 – 2006 / Transit FWD & Transit Connect to date

CH1214124

CH1214124-A

Description:

* Power Steering and Transmission Line Disconnect Tool for 1999-2005 BMW 3-Series and X5

* Made of Red-Anodized Aluminum

* The New Design of the BMW 5346 Also Covers the Transmission Cooler Line

Description:

* Power Steering and Transmission Line Disconnect Tool for 2006-2011 BMW 3-Series and 2006-2009 X3(E90 & E83).

* Made of Red-Anodized Aluminum

* The New Design of the BMW 5346 Also Covers the Transmission Cooler Line.

Description:

* Release the hydraulic cooling lines that connect to the transmission. * Applications: BMW E46, E53, E65, E66, E85, R50, R53.

CHIH TAI Y&S CO., LTD.

CH091558

Transmission Axle Holder Wrench

Description:

E-mail: chihtai@ms16.hinet.net

* This tool use for 2005 & later LAND ROVER with V-8 engines.

CH0312180-P

Description:

* Mainshaft 5th gear nut wrench is a requisite to remove or assemble the mainshaft nut.

* It fits for NV4500HD transference used in Cummins and V10 powered Dodge RAM models have a large diameter mainshaft nut.

* It fits for 1994-2004 Dodge NV4500HD.

CH0812190

Bearing and Seal Rear Differential Tool

Description:

* Installation tool for bearing and seal to rear differential pinion.

Approximate dimensions:

* Main body overall length 14.7cm(5.8"), main diameter 45mm(1.8"), collar diameter 62mm(2.45").. Black plastic adaptor overall diameter 95mm(3.74"), step 63mm(2.5")

* Application: Freelander 2

* Ref : JLR-205-986

CH1214331

ATF Fill Plug Socket(For Mini)

Description:

* Saves time when checking / changing / adding transmission fluid.

* Makes it an easy removal and installation of the fill plug.

* There is very little clearance from the fill plug to the power steering unit in the car, a traditional socket / ratchet will not fit into the car.

* T55 x 17mm

* For Mini. R52,R53, R55, R56, R57, R58, R59, R60, R61 chassis with 6 speed automatic transmission.

NV4500HD Mainshaft 5Th Gear Nut Wrench (Dodge)

E-mail: chihtai@ms16.hinet.net

CH121437-A Sockets For Ball Bearing Nuts

Outer Tooth Part No. ◎

CH121437-A1 22*3 60 CH121437-A2 26*3.5 60 CH121437-A3 30*4 60 CH121437-A4 33*4 60 CH121437-A5 37*4.5 60 CH121437-A6 44*5 60 CH121437-A7 50*5.5 60 CH121437-A8 56*5.5 60 CH121437-A9 63*6 60 CH121437-A10 69*6.5 60 CH121437-A11 75*6.5 6

CH121437-B Sockets For Ball Bearing Nuts

Inner Tooth Part No. ◎

CH121437-B1 26*5.3 60 CH121437-B2 31.2*6.25 60 CH121437-B3 34.2*6.3 60 CH121437-B4 38.2*6.65 60 CH121437-B5 42.2*7.3 60 CH121437-B6 50.1*8.25 60 CH121437-B7 58.2*9.8 60 CH121437-B8 74.6*11.9 60 CH121437-B9 82.2*13.25 60 CH121437-B10 87.7*13 60

CHIH TAI Y&S CO., LTD.

CH0812124 1/2”Dr. BMW Transmission Socket -6Teeth

Description:

E-mail: chihtai@ms16.hinet.net

* 1/2”dr.,for grooved nut on transmission drive shaft flange.

Application range: BMW (5HP24/5HP30) transmission

Specification:

* Drive: 1/2”Dr.

* Inner dia.:63.5mm

* Outer dia.:74mm

* High:35mm

CH0812130

Benz Transmission Overflow Pipe Remover

Description:

* Drift for unclipping the overflow pipe in the oil pan when draining the oil.

* When changing the transmission fluid on type 722.9 transmissions, it is necessary to remove the overflow pipe after removing the drain plug.

* This allows all of the fluid to be drained from the pan.

* Application range: BENZ 722.9 model transmission.

* OEM Code: 722 589 03 15 00

* The 722.9 transmission is the 7-speed automatic fitted in may late-model applications.

CH0812226

Engine Support

Description:

* Used to support the engine when removing and installing the gearbox.

* Applicate gearbox: - 02Q 6V, 0BB, 0FB 6V, 0BH

* Models: -Alhambra 2011 -León 2013 - Ateca

CH0812148

OPEL Vauxhall Linkage Adjusting Tool (M20/M32)

Description:

* Used to lock the shifter assembly and the transmission control housing during shift linkage adjustment.

CHIH TAI Y&S CO., LTD.

E-mail: chihtai@ms16.hinet.net

CH0812229 Benz Oil Pan Wrench (14mm HEX x 17mm BOX)

Description:

* A wrench designed specifically to service the driveline fluids on most BMW and Mercedes Benz vehicles.

* The 14-mm Allen end services the fill and drain plugs on the transmission and differential housing.

* The low-profile design allows access where restricted space does not allow the use of a conventional socket.

* The 17-mm box end services the oil drain plug.

Application Make:

* BMW: Most vehicles since 1990

* Mercedes Benz engine types: 102.92/93/96/98/99, 103, 104, 110.92/98/99, 112, 113, 116, 117, 119, 120, 266, 275, 285, 601, 602.91/93/94/96, 603.91/93/96/97, 604, 605, 606, 615, 616, 617.91 /95

* Mercedes transmission types: 716, 717, 722, 63

CH120896

Manual ATF Refiller with 20pcs Adapters

Feature:

* Manual type pressure tank to refill ATF on automatic transmission without a dipstick.

* Includes 20 adapters for most common vehicles.

* Tank with 6L capacity, suitable for most transmission-Audi, Cadillac, Ford, GMC, Infiniti, Mercedes, Nissan, Toyota, VW, and Volvo.

* Specially designed tank base for feet to step on stabilize the tank while pumping.

* Adapters in nylon 6-6 material provides lightweight but also durable features.

CH1308212 Flywheel Bolt Socket

Description:

* This socket services clutch pressure plate bolts on Mitsubishi 3000 & Dodge stratus clutch assemblies

* Size: 3/8”dr. x 10Point x 12mm

* Material: CR-Mo

CH1214417-A

BMW Electric Power Steering Rack Socket

Description:

* For dismounting and mounting of electric power steering rack adjusting screw.

Application:

* BMW 1series:E81,E82,E87,E88, 3series:E90, E91,E92,E93, Z4: E89

CH1214417-B

BMW/Mercedes Electric Power Steering Rack Socket

Description:

* For dismounting and mounting of electric power steering rack adjusting screw.

Application:

* BMW 1series:F20,f21, 2series:F22,F23, 3series:F30, F31,F34,F35, 4series:F32,F33,F36, X1:F48, F49, X3:F25, X4:F26

* Mercedes, C-class:W205, S-class: W222,V222,X222

CH2008110

Inner-Driveshaft Extractor Fork

Description:

* The driveshafts on many front wheel drives are held in the gearbox by a spring clip locking ring.

* To remove the driveshaft from the vehicle, the inner driveshaft requires levering out.

* Unless the correct tool is used that can provide the required leverage in exactly the right place, the gearbox casing, as well as the driveshaft joint, are at risk of being damaged.

* This tool has been specifically designed to allow the correct controlled force to be applied to the inner driveshaft to lever it out quickly and easily.

* No hammer is required.

* Total length: 390mm; jaw width: 82mm.

Applications

* Ford, Mazda, Volvo, Renault, Dacia & other front wheel drive vehicles.

Engine Testing Tool

Engine Testing Tool

CH210535

Diesel Engine Compression Tool Set (For medium-size car, For nozzle holder）

Description:

* This set allows the measurement of compression by connecting a provided appropriate adapter to the nozzle holder or glow plug of a diesel engine.

* Application：ISUZU, TOYOTA, MITSUBISHI, MAZDA

CH210536

Description:

* This set allows the measurement of compression by connecting a provided appropriate adapter to the nozzle holder or glow plug of a diesel engine.

* Application：ISUZU, HINO, NISSAN, MITSUBISHI

CH210537

Description:

* This set allows the measurement of compression by connecting a provided appropriate adapter to the nozzle holder or glow plug of a diesel engine.

* Application：ISUZU, HINO, NISSAN, TOYOTA,MAZDA

Diesel Engine Compression Tool Set (For large-size car, For nozzle holder)

Diesel Engine Compression Tool Set (For glow plug)

CH210538 Diesel Engine Compression Tool Set

CH210553

CH210556-A

Description:

* The product is an indispensable gauge for maintaining the automotive diesel engine. It is used to measure the pressure inside the cylinder.

* Application：ISUZU, HINO, TOYOTA, NISSAN,MITSUBISHI, Daihatsu, MAZDA, Komatsu

Diesel Compression Tester

Description:

* Easy-to-use compression tester is designed specifically for medium-duty engines equipped with glow plugs.

* Dual reading gauge measures compression to 1000 PSI and 7000 kPa.

* Gauge has a push-button release valve and quick disconnect fittings on the hose end. Tester comes with all the necessary glow plug and nozzle adapters in a handy storage case.

Application:

* Cummins B and C engine

* Navistar DT466/DT360

* Ford/Navistar 6.9 & 7.3L

* GM 6.2L and 6.5L

* Hino diesel and Mitsubishi Fuso truck engines

Automotive Diesel Compression Test Set

Description:

* A basic set for Diesel work in the American market.

* Tester has a handy deflator for releasing air & retesting.

* With one 16-1/2" wire reinforced hydraulic hose has a quick coupler on a swivel for ease of connection.

* With 2-1/2" gauge with easy to read red and black dial & snap-in lens.

* Records pressures from 0-1000 PSI and 0-70 kg/cm2.

* Adapters for GM, Isuzu, Lincoln Mark Vll and Continental, Ford/Navistar, Audi, Mercedes, Peugeot, Toyota, VW, VolvoBacharach conversion adapter also included.

CHIH TAI Y&S CO., LTD.

CH210524

CH210507

E-mail: chihtai@ms16.hinet.net

Heavy Duty Global Diesel Compression Test Set

Description:

* Contains compression tester and an assortment of adapters to test a wide variety of vehicles, trucks, heavy-duty equipment deluxe gauge with rubber boot.

Application:

* Audi,Mercedes,VW,Volvo,Cummins,Allis Chalmers,Bedford,J.I.Case, J.I.Case 70 Series,John Deere Pencil Type,John Deere,Flat Allis,Ford Tractor,International,Harvester,Mack Truck,Massey Ferguson,MitsubishiFuso,Onan,Scania,Waukesha,Wisconsin,White Farm,Kubota,Mitsubishi,Nissan,Toyota,UD-Nissan Truck,Detroit Diesel,Lincoln,Mark,Continental,Dodge,Case/Cummins"C"Series, Dodge,Navistar,Caterpillar-Pencil,Caterpillar-Capsule,GMC Truck,Hine,Isuzu Truck.

Universal Compression Tester Kit

Description:

* This versatile kit provides a quick method to obtain cylinder compression pressure on engines with deep, recessed spark plugs and difficult access.

* A special air-hold valve is included for easy resetting of the gauge, which is graduated from 10 to 300 psi (0 to 21 kg/cm2).

* Gauge assembly includes pressure relief valve.

CH210517-B

Compression Tester

Description:

* Checks cylinder compression from 0 to 300 PSI (0 to 21 kg/cm2).

* Fit 10mm,12mm and 14mm spark plug threads

* Equipped with air-hold valve and gauge reset button

* 12"flexible rubber hose

E-mail: chihtai@ms16.hinet.net

CH210502

CH210516

Diesel Compression Tester

Description:

* 2-1/2" dial, glycering filled gauge with glass lens in stainless steel housing.

* 4,500 PSI rated nylon jacketed pressure hose assembly.

* Dual scale -0-1,000 PSI; Metric Scale -0-70 kg/cm2. 13 Piece adapter set.

* Included Ford/Navistar,General Motors,Audi,Cummins,Merceds Benz,Volkswagen,Volvo,Bacharach,Allis Chalmers,Bedford,Case,J.I.,Deere,John,Fiat Allis,Ford Tractor,Interational Harvester,Mack Turk,Onan,Waukesha,BMW,Lincoln conntinetal,Mark Ⅶ,Peugeot,Chevy Luv,Isuzu,Toyota,General Motors,Detrolt Diesel,Caterpillar,Case,Waukesha.

Compression Test Kit

Description:

* Compression test on vehicles with gasoline engines. Long flex hose and adapters eliminate the need to remove secondary equipment such as power brakes, steering, air conditioning, and manifold components.

* Side release valve for quick re-testing of cylinder. Set includes gauge and 14mm/18mm solid short adapter, 14mm/18mm long flexible adapter, 14mm long reach adapter, and instruction manual.

* Large 2-1/2" gauge with dual inch/metric readings: 0 to 300 PSI and 0 to 21 kg/cm2.

* Boot on gauge provides extra protection from rough handling.

* Small 1-1/2" gauge w/dual inch/metric readings 0-200 PSI and 0 to 14 kg/cm2.

* Application: American motors,Chrysler,Ford,GM,Mitsubishi,Nissan,Peugeot porsche,Subaru,Suzuki.Toyota,Jeep,Saturn,Saura,Audi,BMW,Daih atsu,Hoda,Hyundai,Infiniti,Isuzu,Jaguar,Kia,Land rover,Lexus,Mazda,Mercedes.

CH210519

Gas Cylinder Compression Tester

Content:

* Air gauge with quick coupling & release valve.

* High - tension connecting pipe with safety lock coupling.

* Crank shaft type test pipe with rubber plug.

* Transverse axis test pipe with rubber plug.

* M10× 1.0 Adapter.

* M12× 1.25 Adapter.

* M14× 1.25 Adapter

* M18× 1.5 Adapter.

E-mail: chihtai@ms16.hinet.net

CH210519-A Compression Tester

Description:

* Easy -reading 2-1/2" diameter gauge features color-coded quadruple calibrations 0-300 psi,21kg/cm,21bar&2100 kpa.

* 13" durable rubber hose with 14mm/18mm adapter.

* 6" heavy-duty stem with universal rubber cone adapter fits all plug holes.

* Convenient pressure -holding side release valve.

* Provides an accurate reading on high performance engines.

CH210519-F Digital Compression Tester

Description:

* Digital manometer with quick coupling , 0-300 PSI , display in PSI / BAR / KPA , supplied with adapters suitable for spark plug threads.

* 1pc M10×1.0 Adapter

* 1pc M12×1.25 Adapter

* 1pc M14×1.25 Adapter

* 1pc M18×1.5 Adapter

* 1pc Rubber-sealed pressure piece for manual use, bent.

* 1pc Rubber-sealed pressure piece for manual use, straight.

CH210503

Diesel Engine Compression Tester Set

Description:

* Comprehensive test kit for both direct and indirect diesel injected cars.

* For use on both direct or indirect injection engines.

* Checks engine compression under cranking conditions.

* Small profile, quick coupling adapters for speed & security.

* Built-in pressure relief valve enables repeat tests without dismantling.

* Flexible hose(355MM) gives access to restricted plug & injector ports.

* Dual scale 80MM DIA gauge 0-1000 PSI & 0-70 kg/cm2.

chihtai@ms16.hinet.net

CH210503-D Diesel Engine Compression Tester Set

Description:

* Comprehensive test kit for both direct and indirect diesel injected cars.

* For commercials, marine & industrial engines.

* Checks engine compression when cranking.

* Small profile, quick release coupling system.

* Built-in pressure release enables complete tests without dismantling.

* Flexible hose(355MM) gives access to restricted plug & injector ports.

* Dual scale 80MM DIA gauge 0-1000 PSI & 0-70 kg/cm2.

CH210534 Diesel Engine Compression Tester Set

Description:

* Comprehensive kit for checking compression on both direct and indirect diesel injected commercial, marine and industrial engines.

* For commercials, marine & industrial engines.

* Checks engine compression when cranking.

* For use on direct or indirect fuel injection engines.

* Built-in pressure release enables complete tests without dismantling.

* Small profile, quick release coupling system.

* Dual scale 80MM DIA gauge 0-1000 PSI & 0-70 kg/cm2. flexible hose(355MM)to give access in restricted spaces.

CH210534-A Diesel Engine Compression Tester Set

Description:

* Comprehensive kit for checking compression on both direct and indirect diesel injected commercial, marine and industrial engines.

* For commercials, marine & industrial engines.

* Checks engine compression when cranking.

* For use on direct or indirect fuel injection engines.

* Built-in pressure release enables complete tests without dismantling.

* Small profile, quick release coupling system.

CH210560 Petrol Engine Compression Tester Set

Description:

* Comprehensive kit based on petrol compression tester for vehicles with M10,M12,M14 and M18 spark plug threads.

* Complete with extensions, thread chasers and service kit.

* Checks condition of valves, piston rings, gaskets & cylinder heads

* Used on cars, vans & motorcycles.

* Pressure relief valve enables repeated testing of a cylinder without removing the gauge.

CH210505-A

Diesel Engine Compression Tool Kit Master

Description:

* As this kit but with the addition of it Clamp-on Injector Adaptor Set.

* Large, 2-1/2" ,70kg/cm2(1000psi) gauge with rubber bumper, straight and right angled quick connect fittings and an extensive range of glow plug and injector adaptors enable this kit to cover the vast majority of car,van,truck and bus, agricultural and marine diesel engines.

* Supplied in plastic case with pre formed liner and foam filled lid.

* Glow plug Adaptor: Wide range of Alfa , BMW , Chrysler, Daewoo , Fait , Ford , Hyuidai , Izusu , LandRover , LDV , Mazda , Mercedes , Mitsubishi , Nissan , Opel , PSA , Renault , Saab , Suzuki , Toyota , VAG , Vauxhall , Volvo diesel engines

* Injector: M20 , M22 , M24 & Ford Stanadyne injector plus clampon injector

CH210505-D

Diesel Engine Compression Tool Kit

Description:

* Set included clamp-on Injector Adaptor Set. Large, 21/2" ,70kg/cm2(1000psi) gauge with rubber bumper, straight and right angled quick connect fittings and an extensive range of glow plug and injector adaptors enable this kit to cover the vast majority of car,van,truck and bus, agricultural and marine diesel engines.Supplied in plastic case with pre formed liner and foam filled lid.

* Glow plug Adaptor: Wide range of Alfa , BMW , Chrysler , Daewoo , Ford , LandRover , Mercedes , Mitsubishi , Nissan , PSA , Renault , Saab , VAG , Vauxhall , Volvo diesel engines

E-mail: chihtai@ms16.hinet.net

CH210505-E Diesel Engine Compression Tool Kit

Description:

* Set included clamp-on Injector Adaptor Set. Large, 21/2" ,70kg/cm2(1000psi) gauge with rubber bumper,straight and right angled quick connect fittings and an extensive range of glow plug and injector adaptors enable this kit to cover the vast majority of car,van,truck and bus, agricultural and marine diesel engines.

* Supplied in plastic case with pre formed liner and foam filled lid.

* Glow plug Adaptor: Wide range of Alfa , Fait , Ford , PSA diesel engines.

CH210505-J

Petrol & Diesel Engine Compression and Leakage Test Kit

Description:

* This petrol & diesel engine compression and cylinder leakage test kits that cover the wide range of modern engines, including Hdi, TDCi and Pumpe Duse.

* Included clamp-on injector adaptors, 0-50 Bar (700PSI) gauge with rubber bumper, straight and right angled quick connect fitting and an extensive range of glow plug and injector adaptors enable this kit to cover the vast majority of car, van, truck, and bus, agricultural and marine diesel engines.

* Additional pressure gauge for references on incoming pressure during the operation (0-7bar).

* Glow Plug Adaptors: Wide range of Alfa, BMW, Chrusler, Daewoo, Fait, Ford, Hyuidi, Izusu, Land Rover, LDV, Mazda, Mercedes, Mitsubishi, Nissan, Opel, PSA, Renault, Saab, Suzuki, Toyota, VAG, Vauxhall, Volvo diesel engines.

* Spark plug size : 10 , 12 , 14 , 18mm.

* Injector: M20, M22, M24 & Ford Stanadyne injector plus clampon injector.

CH210525

Petrol Engine Compression Tester Deluxe Kit

Description:

* Large 2-1/2" gauge fitted with protective cover and 445mm hose.

* Scale reads from 0-350 psi ( 0-25 bar ) and conforms to BS 1780-1985 . Suitable for petrol engines with 10 , 12 , 14 or 18mm spark plugs and includes a long reach adaptor for 16v and v6 engines .

* Also includes 445mm hose and quick release connector for air input.

E-mail: chihtai@ms16.hinet.net

CH210561 Compression Tester

CH210566

CH210570

Description:

* Features a quick disconnect with a pressure release valve and a 300 psi. gauge.

* Designed to check cylinder compression.

* Contains hoses for 10, 12 & 14 mm spark plug applications.

Diesel Engine Compression Tool Kit

Description:

* Comprehensive test kit for both direct and indirect diesel injected cars.

* Simple & easy to use, quick coupling adapters for speed & security.

* For use on both direct or indirect injection engines.

* Checks engine compression under cranking conditions.

* Built-in pressure relief valve enables repeat tests without dismantling

* Flexible hose(355MM) gives access to restricted plug & injector ports.

* Set included dual scale 80MM DIA gauge 0-1000 PSI & 0-70 kg/cm2 with rubber bumper,straight and right angled quick connect fittings and an extensive range of glow plug and injector adaptors

* Glow plug Adaptor: Wide range of Alfa , BMW , Chrysler, Fait , Ford , Hyundai , Isuzu , LandRover , Mazda , Mercedes , Mitsubishi , Nissan , Opel , Renault , Suzuki , Toyota , Volvo diesel engines.

Diesel and Petrol Engines Compression Tester Set

Description:

* Comparative tests of the compression pressure of diesel and petrol engines for test tools.

* This tester kit can be compared that measurements of the compression of individual cylinders can be effected.

Contents:

* Gauge ( 2 1/2" ) connect 500 mm hose with quick coupling.

* Gauge range︰0~40bar, 600psi.

* Adapters for Diesel engines x 5pcs.

* Adapters for Petrol engines x 7pcs.

* Angular adapter x 1pc.

CH210574 Diesel Engine Compression Tester Set

Description:

* Comprehensive test kit for both direct and indirect diesel injected cars.

* For use on both direct or indirect injection engines.

* Checks engine compression under cranking conditions.

* Small profile, quick coupling adapters for speed & security.

* Built-in pressure relief valve enables repeat tests without dismantling.

* Flexible hose(355MM) gives access to restricted plug & injector ports.

* Dual scale 80MM DIA gauge 0-800 PSI& 0-60bar.

CH210572

Diesel Engine Compression Tester Set

Description:

* Comprehensive test kit for both direct and indirect diesel injected cars.

* For use on both direct or indirect injection engines.

* Checks engine compression under cranking conditions.

* Small profile, quick coupling adapters for speed & security.

* Built-in pressure relief valve enables repeat tests without dismantling.

* Flexible hose(355MM) gives access to restricted plug & injector ports.

* Dual scale 80MM DIA gauge 0-1000 PSI& 0-70 kg/cm2.

CH210573

Diesel and Petrol Engine Compression Tester Set (Opel)

Description:

* Diesel and petrol engines compression tester set.

* Flexible hose with proportioned pressure check quick coupling and valve to connect different adapters. Extra pressure release valve between gauge and hose.

Contents:

* Gauge ( 2 1/2" ) connect 500 mm hose with quick coupling.

* Gauge range︰0~40bar, 600psi.

* Adapters for Diesel engines x 4pcs.

* Adapters for Petrol engines x 2pcs.

* Glowplug Adaptors x 2pcs.

* Angular adapter x 1pc.

E-mail: chihtai@ms16.hinet.net

CH210576

Diesel Engine Compression Tool Set

Description:

* This set contains a wide variety of popular dummy glowplug adapters and injector applications.

Contents

︰

* Gauge Assembly, Gauge range︰0~60bar, 800psi.

* PVC Hose x 1pc

* Glowplug Adaptors x 18pcs

* Injector Adaptors x 5pcs

*Angular adapter x 1pc

* Spacer x 1pc

Application

* ALFA ROMEO, AUDI, BMW, CARBODIES, CHRYSLER, CITROEN, DAEWOO, DAIHATSU, FIAT, FORD, FSO, HONDA, HYUNDAI, ISUZU, JAGUAR, LADA, LANCIA LAND ROVER, LDV, MAZDA, MERCEDED, MITSUBISHI, NISSAN, PEUGEOT, PENAULT, ROVER, SAAB, SEAT, SKODA, SUZUKI, TALBOT, TATA, TOYOTA, OPEL/ VAUXHALL, VOLKSWAGEN, VOLVO.

CH210539

Fuel Injection Pressure Test(For Japanese car)

Description:

* This set is for measuring the fuel pressure of computerized fuel injection equipment.

CH210540

Fuel Injection Pressure Tester

Description:

* This product can measure the fuel oil pressure of engine (automobile) with a fuel injection device, and determine whether the fuel system is in sound condition.

* This product is specially designed for measuring the fuel oil pressure of the fuel pumps for Toyota and Nissan electronic injection devices.

CH210542

Fuel Injection Pressure Test(For Japanese car)

Description:

* This set is for measuring the fuel pressure of computerized fuel injection equipment.

CH210501

Fuel Injection Test Kit

Description:

* The fuel injection test kit tests fuel injection systems on vehicles on most makes and models.

* Pinpoints problems in filters,lines,and regulators.

* This kit comes complete with assorted hoses, hose barb fittings, and hose clamps to adapt to earlier vehicle models, as well as current.

* The adapter set tests fuel injection systems on vehicles on most makes and models: Accura Honda Hyundai, Mazda,Suzuki,Toyota,Audi,BMW,Mercedes,Puegot,Porshe,saab vw, Volvo W/CIS,CISE or K.jetroni.

CH210501-C

Fuel Injection Test Kit

Description:

* The fuel injection test kit checks fuel pressure and volume on most Asian system.

* Quickly diagnoses fuel related problems like hesitation, stumble, stall and lack of power caused by low fuel pressure, defective fuel pressure regulators and low fuel volume to the injectors plus much more.

* Fitting seals are compatible with most popular cleaning solvents.

* All fittings have quick connect Schrader valves for safety and ease of hookup to the gauge assembly.

* Checked for Hyundai , Honda , Mitsubishi , and other Asian automotive engines .

E-mail: chihtai@ms16.hinet.net

CH210518

Fuel Injection Pressure Test

Description:

* with a large 3-1/2" gauge with dual readings of 0-145 psi and 01000 kpa.

* Also with a low pressure 2-1/2" gauge for an accurate reading below 15 psi.

* All adapters, gauges, and hose assemblies feature a quick coupling system for speedy and efficient testing connection.

* The uniquely designed relief valve relieves the pressure and the fuel safely.

* Also allows checking for sufficient fuel flow.

* No need for wrenches or pipe dope.

* The specially designed compact, neatly arranged plastic blowmolded box makes storage easy.

* Comes complete with instruction manual.

* The adapter set tests fuel injection systems on vehicles on most makes and models:Accura Honda Hyundai Mazda,Suzuki,Toyota,Audi,BMW,Mercedes,Puegot,Porshe,Saab vw,Volvo w/cis,CISE or K.jetroni.

CH210557

Master Cummins Diesel Fuel Injection Test Kit

Description:

* Includes the fitting gauge needed to check fuel pressure, fuel volume, and fuel restrictions.

Contents:

* Special quick-disconnect banjo fitting (M14 x 1.5 male).

* Two fuel injection quick-coupler adapters.

* Quick disconnect banjo fitting (M12 x 1.5 male).

* Gauge assembly.

* Fuel volume test adapter.

* Diesel fuel inlet restriction test adapter.

* Application: 1988-98 Dodge pickups and vans with 5.9L 12valve, and 1998 1/2-newer 5.9L 24-valve Cummins Diesel engines.

CH210558

Multi-Port Fuel Injection Pressure Tester

Contents :

* Gauge and blow down hose assembly.

* Adapter hose for schrader test ports with 7/16-20 threads.

* Adapter hose for schrader test ports with .308-32 threads.

* Single end hose connector 1/4" , 5/16" and 3/8".

* Double end hose connector 5/16" and 3/8".

* 6mm fuel bolt adapter.

CH090904

Fuel Injection Cleaner & Tester Kit

Description(including):

* Canister; Air inlet coupler; Reducing valve; Fluid outlet coupler; 8732(8731)test & cleaning body with gauge & controller valve

8730 coupler

8707 14mm swivel adaptor

8706 12mm swivel adaptor

8705 6x8x10mm adaptor

8728 5/16" adaptor (long)

8729 3/8" adaptor

8727 1/4" adaptor

8726 5/16" adaptor (short)

8714 14mm adaptor

8715 16mm adaptor

8716 1/2"-20 unf adaptor

8717 14mm adaptor

8718 12mm adaptor (swivel)

8719 14mm adaptor (swivel)

8720 16mm adaptor (swivel)

8721 supply & return line isolated coupler

8722 supply & return line hose coupler

8723 supply & return line hose adaptor

8710 5x8mm hose adapter (double adaptor)

8701 5x8mm hose adapter

8702 6.5x10mm hose adapter

8703 8.5x12.5mm hose adapter

8704 9x13mm hose adapter

8713 9x13mm hose adaptor (double adaptor)

CH210564

Common Rail Injector, Return Flow Pressure Measurement Tester

Description:

* For testing the return flow pressure from common rail injectors of Bosch, VDO/Siemens & Delphi engine system.

* Suitable for testing the condition of a piezo pass or fail statement.

CH210533-B

European Fuel Injection Fitting Kit

Description:

* The fittings in this kit enable you to connect OTC No. 7211 gauge (not included) to most Audi,Mercedes Benz, Volkswagen, and other European automotive engines, and diagnose most common fuel system problems involving low fuel pressure and low fuel volume at the injectors.

* It even works on CIS and CISE systems. Each fitting comes with a quick-connect Schrader valve for safe, easy hookup to the gauge assembly.

* Fitting seals are compatible with most popular cleaning solvents.

E-mail: chihtai@ms16.hinet.net

CH210533-C Asian Fuel Injection Fitting Kit

Description:

* Diagnoses fuel related problems such as hesitation ,stumble, stall, and lack of power on nearly every Asian import system by simply checking fuel pressure and volume.

* With just a few quick connections you'll know if the problem is caused by low fuel pressure, a defective fuel pressure regulator, low fuel volume to the injectors plus much more.

* Each fitting comes with a quick-connect Schrader valve for safety and easy hookup to the gauge assembly.

* Included Hyundai , Honda , Mitsubishi , and other Asian automotive engine.

CH210559 GM Throttle-Body Injection Fitting Kit

Description:

* This kit has everything you need to quickly and easily check the fuel pressure in GM throttle-body injection systems.

* It's designed for 1982 and newer low-pressure TBI system.

CH210577

Common Rail Return Fuel Tester (Quick Replace Coupling)

Description:

* Suitable for injector return side of a CRD system.

* This kit can help to diagnose poor acceleration, general lack of engine power, rough engine running, and no engine starting.

Contents:

* Graduated acrylic measuring block with hook for up to 8 cylinders x 1pc.

* Hoses with Quick Replace Coupling and Short pipes sets

* Spring Steel x1pc and Flexible Line Clamp x1pc.

*Injector adapters sets for Bosch/ Simens/ Denso/ Delphi.

CH210568 Gasoline Injection Pressure Test Set

Description:

* Pressure testing diagnosis on a wide range of Single Point, Multi-point, Mechanical and Electronic Injection System.

* A modular range comprising 3 × Test Kits and 2 × Workshop Combination Sets each designed to cover fuel injection system groups.

* Each kit progressively builds up the application coverage start with Gauge/Hose and adptors for TestPort entry, increase to encompass Single Point (TBi) and Electronic systems (EFi), and finally, add Mechanical Fuel Injection (CIS) applications

CH210568-A Gasoline Injection Pressure Test Set

Description:

* Pressure testing diagnosis on a wide range of Single Point, Multipoint, Mechanical and Electronic Injection System.

* A range each designed to cover fuel injection system groups.

* Each kit progressively builds up the application coverage start with Gauge/Hose and adaptors for test port entry, increase to encompass Single Point and Electronic systems, and finally, add Mechanical Fuel Injection applications.

CH210568-B Gasoline Injection Pressure Test Set

Description:

* Pressure testing diagnosis on a wide range of Single Point, Multipoint, Mechanical and Electronic Injection System.

* A range each designed to cover fuel injection system groups.

* Each kit progressively builds up the application coverage start with Gauge/Hose and adaptors for test port entry, increase to encompass Single Point and Electronic systems, and finally, add Mechanical Fuel Injection applications.

CH210568-C Gasoline Injection Pressure Test Set

CH120894 Diesel

Description:

* Pressure testing diagnosis on a wide range of Single Point, Multipoint ,Mechanical and Electronic Injection System.

* A range each designed to cover fuel injection system groups.

* Each kit progressively builds up the application coverage start with Gauge/Hose and adaptors for test port entry, increase to encompass Single Point and Electronic systems, and finally, add Mechanical Fuel Injection applications.

Low Pressure Diagnostic Tool Set

Description:

* This diagnostic set is to inspect low pressure or return fuel side of diesel engines.

* Two manometers with different scales( -1~5 bar & -1~15bar) offer more accurate test results

* With 10pcs fuel line adapter can be used on a wide range of diesel engines.

* Translucent tube on adapters help observe impurities and bubbles in the fuel.

* With 2 meter length of hoses can help connections in confined areas in engine compartment.

CH0915112

Fuel Injection Canister

Description:

* Two gauge design allow vehicle fuel pressure to be cleaned.

* Top gauge allows easy setting of cleaning pressure by simply checking the vehicle fuel pressure on the bottom gauge.

* Allows for cleaning of carbon from cylinders, intake valves and fuel passages.

* Allows cleaning of fuel injectors to restore spray patterns.

* Unit uses standard shop air and professional canister cleaning solution.

Engine

E-mail: chihtai@ms16.hinet.net

CH210522 Diesel Injector Test and Calibrating Hand Pump

Description:

* Material aluminum alloy (A356)

* 3.5 inch dial gauge reading 0-600 bar also reading 0-8700 Lbs/sq.lncg

* The liquid tank is provided with a filter.

* Set included 2 pipes: M14xM14 and M14xM12 pipes.

* Other available type Item No.CH210522-A, with dial gauge reading 0-400 bar (0-5800 psi).

CH210585 Injector Pressure Testing Device

Description:

* Testing petrol and diesel fuel injector for examination of opening pressure, spray pattern and leaking tightness of the injection nozzles.

Content:

* 3.5 inch dial gauge reading 0-400 bar also reading 0-5800 psi.

* Pressure line tread M12×1.5 with adaptor M14×1.5 ,M12×1.25, M17×0.75

* Other available type Item No. CH210585-A, with dial gauge reading 0-600 bar (0-8700 psi).

CH210554

Oil Pressure Gauge Set

Description:

* Use on diesel and gasoline engines .

* Includes standard and metric adaptors for most popular domestic and import cars, trucks, tractors and stationary engines Features bright, easy-to-read gauge with black protective boot.

Content:

* 1pc 0-100 PSI (0-700 kPa) Gauge Assembly

* 6pcs Adaptors: 1/8-27 to 1/4-18, 1/8-27 to 1/-28 BSPT, 1/8-27 to M12-1.5, 1/8-27 to 3/8-18, 1/8-27 to M10-1.0, 1/8-27 to M14-1.5

* 1pc Street Elbow

* 1pc Coupling

* 1pc Hose Assembly

* 1pc 2" Large Nipple

E-mail: chihtai@ms16.hinet.net

CH210555 Oil Pressure Check Kit

Description:

* For testing engine oil pressure at the oil filter on most passenger cars and light trucks.

* Adapters are included for both domestic and imported engines.

* Gauge range: 0-100PSI.

CH210532 Engine Oil Pressure Tester

Description:

* Designed to check engine oil pressure in both cars and trucks.

* Easy to read dual scale gauge.

* Complete with 24" (600mm) of oil proof hose with 1/8"NPT.

* Also includes 1/4" NPT and 3/8" NPT adaptors.

* Dual gauge readings: 0 to 300psi (0 to 21bar)

* Gauge diameter: 2.5"

CH210512 Oil Pressure Tester Set

Description:

* Helps to diagnose worn oil pumps and engines, faulty oil pressure switches and warning indicators.

* Accurately tests oil pump pressure, switch & warning indicators.

* Large clear dual scaled gauge.

* Quick coupling adapters, with shut-off valve, for speed & security.

* Permanently oil primed, long, flexible hose.

CH210575 Oil Pressure Test Set

Description:

* Help to diagnose worn oil pumps and engines, faulty oil pressure switches and warning indicators.

* Accurately tests oil pump pressure, switch and warning indicators.

* Gauge range︰0~10 BAR, 0~140 PSI.

* Permanently oil primed 2M flexible hose.

* Quick coupling adapters, with removable shut-off valve.

* Adapters x 11pcs

* Angular adapters x 1pc

CH210506-C Basic Exhaust Back Pressure Set

Description:

* Enables technician to test exhaust back pressure through oxygen sensor.

* Oxygen sensor adapter includes M12 and M18 thread.

* The special 2-1/4 in. gauge has two multi-colored bands-idle 2500RPM,with pressure shown in PSI and bar.

* Famished with rubber boot to protect gauge.

* Hose is 6 ft., enough length for the user to test from the driver's seat.

CH210511

Deluxe Brake Pressure Test Kit

Description:

* Features two 3,000-psi gauge assemblies.

* Dual scale dial – standard scale 0-3,000 psi and metric scale 0200 kg/cm2. 4,500 psi rated pressure hose assembly.

* Include 22-piece adapter set.

* Includes high impact blow-molded carrying case & reference chart.

CH210511-A ABS & Brake Pressure Test Kit

Description:

* Adapters install directly into wheel cylinder or back caliper line access holes.

* Measures pressure at front or back of master cylinder or ABS port.

* Comes with a complete line of adapters,gauge assembly,a complete instruction manual and vehicle look-up table.

* Analog pressure gauge 0-3000 PSI and is accurate to 4% of scale.

* JIC quick disconnect for easy connection.

* Complete adapter line with annual updates offered as needed.

* Comes with a lifetime warranty covering defects in material and workmanship.

CH210531

Transmission Pressure Gauge Set

Description:

* For all major manufacturer domestic and import vehicles.

* Contains two gauges assemblies for high and low pressure ranges.

* Nine adaptors to test a wide variety of domestic and import automatic transmissions.

* Four special fittings are also included for connection to hard-toreach test ports in areas requiring a 45 ﾟ or 90 ﾟ angle.

* Acura/Honda, BMW, Chrysler Corp, AMC/Eagle, Jeep, Ford, General Motors, Saturn, Hyunda, Infiniti, Lsuzu, Jaguar, Lexus, Mazda, Mercedes, Mitsubishi, Nissan, Peufeot, Saab, Subaru, Suzuki, Toyota, VW, Volvo.

CH210541 Automatic Transmission Oil Pressure Tester

Description:

* The product is a tester for accurate and rapid measurement of the automatic transmission oil pressure.

* It can correctly determine whether there is fuel leakage, pressure leakage, poor hydraulic piston, screen blockage or other internal faults.

CH210508

Cylinder Leak Detector and Crank Stopper

Description:

* Kit allows easy identification of compression problems

* Detector measures exact leakage amount and locates leaks area

* Crank stopper locks engine in place to facilitate installation of timing belts, removal of harmonic balance pulleys and replacing spark plugs.

CH210511-B

Brake and Clutch Master Cylinder Pressure Tester Kit

Description:

* Adapters install directly into master cylinder line access holes.

* Measures pressure at front or back of master cylinder.

* Comes with complete line of adapters,gauge assembly,a complete instruction manual and vehicle look-up table.

* Analog pressure gauge 0-3000 PSI and is accurate to 4% of scale.

* JIC quick disconnect for easy connection.

* Complete adapter line with annual updates offered as needed.

* Comes with a lifetime warranty covering defects in material and workmanship.

E-mail: chihtai@ms16.hinet.net

CH210511-C Brake and Clutch Master Cylinder Pressure Tester Kit

Description:

* Adapters install directly into master cylinder line access holes.

* Measures pressure at front or back of master cylinder.

* Comes with complete line of adapters,gauge assembly,a complete instruction manual and vehicle look-up table.

* Analog pressure gauge 0-3000 PSI and is accurate to 4% of scale.

* JIC quick disconnect for easy connection.

* Complete adapter line with annual updates offered as needed.

* Comes with a lifetime warranty covering defects in material and workmanship.

CH210505

Diesel Engine Cylinder Leakage Test Kits

Description:

* Three diesel engine cylinder leakage test kits that cover the wide range of modern engines ,including HDi, TDCi and Pumpe Duse .

* This kit covers most popular cars and vans, it has additional glow plug adaptors for increased coverage and with further includes an adaptor set for clamp-type injectors to give even winder coverage of car,van,truck and bus, agricultural and marine applications.

* Glow plug Adaptor: Wide range of Alfa , BMW , Chrysler, Daewoo , Fait , Ford , Hyuidai , Izusu , LandRover , LDV , Mazda , Mercedes , Mitsubishi , Nissan , Opel , PSA , Renault , Saab , Suzuki , Toyota , VAG , Vauxhall , Volvo diesel engines.

* Injector: M20 , M22 , M24 & Ford Stanadyne injector plus clampon injector

E-mail: chihtai@ms16.hinet.net

CH210508-B

Deluxe Cylinder Leak Detector Tester Set

Description:

* Kit allows easy identification of compression problems

* Detector measures exact leakage amount and locates leaks area

* To inspect the capacity of cylinder leakage, capacity 0-7 bar, while the cylinder systems pressurize it must reach 7 bar.

Content:

* With 4pcs adaptors: M10×1.0, M12×1.25, M14×1.25, M14×1.25 Extra Long

* With 2pcs compression Test Adaptor: -1 pc adaptor for 12mm spark plug, suitable for BMW 335I E90, 2006 model, N54 engines, BMW Mini Cooper, Mercedes Benz M156 (AMG model manufactured from 2006 and onwards),Peugeot 207, 307, Renault 1.2 16 Valve -1 pc adaptor for 14mm spark plug, suitable for V6 and 16 Valve engines with deep seated spark plug port.

* 25" rubber hose with Adaptor fit 14 and 18mm spark plug hole.

* 15" rubber hose this hose is also suitable to other range of diesel engine testing set from our company.

CH210508-D

Cylinder Leak Detector Tester Set

Description

* Kit allows easy identification of compression problems

* Detector measures exact leakage amount and locates leaks area

* To inspect the capacity of cylinder leakage, capacity 0-7 bar, while the cylinder systems pressurize it must reach 7 bar.

Content:

* With 4pcs adaptors: M10×1.0, M12×1.25, M14×1.25, M14×1.25 Extra Long

* With 1pc Compression Test Adaptor - 14mm spark plug used on V6 and 16 Valve engines with deep seated spark plug port.

* 25" rubber hose with Adaptor fit 14 and 18mm spark plug hole.

* 15" rubber hose this hose is also suitable to other range of diesel engine testing set from our company.

CH210505-B

Diesel Engine Leakage Adaptor Test Set

Description:

* Clamp-on injector adaptors covering car, van,truck and bus, agricultural and marine injector sizes.

CH210562 4-Stroke Leak Down Tester

Description:

* Gauge will register the total percentage of leakage past the rings, head gasket, intake and exhaust valves.

* With an air source of 70 to 160 psi. , this system will pressurize the cylinder with 60 psi. of air.

* Designed to check the amount of cylinder leakage in a 4-stroke engine.

* Speeds up troubleshooting & helps to isolate bad components. 10, 12 & 14mm spark plug thread hoses, regulator and gauge included.

CH210563 Engine Leakaging Tester Kit

Description:

* The leakage tester serves for the diagnostics of engine defects, e.g. of the inlet/exhaust valves, the pistons/piston rings and the cylinder head/cylinder head gaskets

* The leakage tester detects and localizes engine defects quickly.

* Differences between the individual cylinder up to two graduation lines (= 4% pressure loss) are acceptable.

* The pressure which have run less than 5000 kilometers may be higher, because the cylinder, the piston and the piston rings have not yet reached their full smoothness.

* Risk of burning on warmed-up engines - never touch hot parts.

* Necessary testing pressure: 6 to 12 bar

CH210506

Carburetor Synchronize

Description:

* For testing fuel pump carburetor and transmission check auto with 2~4 pcs carburetors

* 4 pcs 3-1/2" synchronizer gauges with fixed plate

* Rubber hose 4 pcs 8×5×750mm

* Extension tube 4 pcs 3.9×52mm ,4 pcs 3.9×122mm

* Cone type connector 8 pc 8×40mm

* 4 pcs 10×53mm(M6×0.75)

* 4 pcs 10×60mm(M6×1.0)

CH210506-D

Description:

* For testing fuel pump carburetor and transmission check auto with 2~4 pcs carburetors

Content:

* 4 pcs 3-1/2" synchronizer gauges with fixed plate

* Pressure Range:0~76cmHg

* Rubber hose 4 pcs 8×5×750mm

* Extension tube 4 pcs 3.9×52mm ,4 pcs 3.9×122mm

* Cone type connector 8 pcs 8×40mm

* 4 pcs 10×53mm(M6×0.75)

* 4 pcs 10×60mm(M6×1.0)

CHIH TAI Y&S CO., LTD.

CH210506-F Carburetor Synchronizer(Vacuum)

Description:

E-mail: chihtai@ms16.hinet.net

* For testing fuel pump carburetor and transmission check auto with 2~4pcs carburetors

Content:

* 4pcs 2" synchronizer gauges with fixed plate

* Pressure Range: 0~76cmHg

* Rubber hose 4pc 8×5×950mm

* Extension connector 4pc M5×0.8×169mm

* Extension connector 4pc M5×0.75×53mm

* Extension connector 4pc M5×0.8×100mm

* Extension connector 1pc 6×55

* Extension connector 4pc M6×0.75×53mm

* Extension connector 4pc M6×1.0×60mm

CH210544

Power Steering Tester

Description:

* For accurate, reliable power steering analysis.

* Determines if trouble is in front suspension or steering linkage.

* Saves valuable time when rebuilding or replacing parts not actually defective.

* Set contains 2,000 PSI gauge with metering valve.

* Connection hose,13 adapters and power steering pressure specifications.

* American Motors,Chrvsier Corp,Ford Motor.

CH050314 Engine Calibration and Set-up Kit

Description:

* Use in the Hemi-type engines.

* Easily find the TDC compression stroke.

* Just listen on the whistle alert.

* Gauge Indicated (optional assembly)

* Give you unmistakably clear result to display piston movement.

CHIH TAI Y&S CO., LTD.

CH210506-A Deluxe Vacuum/Fuel Pump Tester Kit

E-mail: chihtai@ms16.hinet.net

Description:

* Diagnoses valve leaks, incorrect timing, leaky intake manifold & clogged mufflers.3-1/2"diameter gauge, includes 3 brass fittings and 4' tubing.

CH210567

Common Rail Return Fuel Tester

Description:

* Comprehensive test kit for both direct and indirect diesel injected cars.

* Simple & easy to use, quick coupling adapters for speed & security.

* For use on both direct or indirect injection engines.

* Checks engine compression under cranking conditions.

* Built-in pressure relief valve enables repeat tests without dismantling.

* Flexible hose(355MM) gives access to restricted plug & injector ports.

* Set included dual scale 80MM DIA gauge 0-1000 PSI & 0-70 kg/cm2 with rubber bumper, straight and right angled quick connect fittings and an extensive range of glow plug and injector adaptors.

* Glow plug Adaptor: Wide range of Alfa , BMW , Chrysler , Fait , Ford , Hyundai , Isuzu , LandRover , Mazda , Mercedes , Mitsubishi , Nissan , Opel , Renault , Suzuki , Toyota , Volvo diesel engines.

CH210504 Flow Meter Common Rail Set

Description:

* The purpose of this instrument is to measure rapidly and effectively the amount of fuel that every injector returns to the deposit tank, so that you will know if any injector is damaged.

Features:

* Direct measurement of return flow of the injector

* Measurement of return flow using external flow meter

* Possibility of simultaneous measurement of up to 6 injectors

E-mail: chihtai@ms16.hinet.net

CH210504-A Flow Meter Common Rail Adaptor Set

Description:

* The purpose of this instrument is to measure rapidly and effectively the amount of fuel that every injector returns to the deposit tank, so that you will know if any injector is damaged.

Features:

* Direct measurement of return flow of the injector

* Measurement of return flow using external flow meter

* Possibility of simultaneous measurement of up to 6 injectors

* Set included 24pc injector adaptors : apply for BOSH . SIEMENS . DENSO and DELPHI injector

CH210504-B Flow Meter Common Rail Set

Description:

* Direct measurement of return flow of the injector

* Measurement of return flow using external flow meter

* Possibility of simultaneous measurement of up to 6 injectors

* Set included 24pc injector adaptors : apply for BOSH-01 , SIEMENS-02 , DENSO-03 and DELPHI injector

CH210504-C Flow Meter Common Rail Adaptor Set

Description:

* The purpose of this instrument is to measure rapidly and effectively the amount of fuel that every injector returns to the deposit tank, so that you will know if any injector is damaged.

Features:

* Direct measurement of return flow of the injector

* Measurement of return flow using external flow meter

* Possibility of simultaneous measurement of up to 8 injectors

* Set included 32pc injector adaptors : apply for BOSH . SIEMENS .DENSO and DELPHI injector

CH210569 Flow Meter Common Rail Set

Description:

* The purpose of this instrument is to measure rapidly and effectively the amount of fuel that every injector returns to the deposit tank, so that you will know if any injector is damaged.

Features:

* Direct measurement of return flow of the injector

* Measurement of return flow using external flow meter

* Possibility of simultaneous measurement of up to 4 injectors

CH210569-A Flow Meter Common Rail Set

Description:

* The purpose of this instrument is to measure rapidly and effectively the amount of fuel that every injector returns to the deposit tank, so that you will know if any injector is damaged.

Features:

* Direct measurement of return flow of the injector

* Measurement of return flow using external flow meter

* Possibility of simultaneous measurement of up to 4 injectors

* Set included 16pcs injector adaptors : apply for BOSH, SIEMENS, DENSO and DELPHI injector

CH210569-C Flow Meter Common Rail Set

Description:

* The purpose of this instrument is to measure rapidly and effectively the amount of fuel that every injector returns to the deposit tank, so that you will know if any injector is damaged.

Features:

* Direct measurement of return flow of the injector

* Measurement of return flow using external flow meter

* Possibility of simultaneous measurement of up to 4 injectors

* Set included 16pcs injector adaptors : apply for BOSH, SIEMENS, DENSO and DELPHI injector

CH1308243

Common Rail Diesel Fuel Return Flow Kit

Description:

* Checking the return flow volumes from common rail systems for eight injectors.

* Used on injectors of BOSCH, DELPHI, DENSO and VDO/SIEMENS.

* A plexiglass container with a graduated scale permits the comparative measurement.

* The tester is connected by adapters to the return flow pipe from the injector.

* The adapters, marked with the name of the injector manufacturer which can be changed over at the connecting hosepipe.

Contents:

* 1 plexiglass measuring container with 8 fuel-resistant

* 8 highly flexible hoses, 1.2M for each

* 8 highly flexible hoses, 130mm (Ø 3.3) for each

* 8 highly flexible hoses, 130mm (Ø 2.5) for each

* 8 adapters for BOSCH injectors.

* 8 adapters for DELPHI injectors.

* 8 adapters for DENSO injectors.

* 8 adapters for VDO*SIEMENS injectors.

* 1 solid plastic case

* 1 Hose Clamp

* 1 Spring

* 1 Hook

E-mail: chihtai@ms16.hinet.net

CH210565

Cooling System Tester Set

Description:

* New cooling system tester set, with the latest most popular aluminum adaptor.

* The ideals of the compilation and a must for truck companies. Multi adaptor applies for most truck models in the market.

* Total 7 pieces adaptor flexible intermediate piece and cooling system tester.

CH050348

Liquid Cooling System Leakage Tester and Refilling

Description:

* Significantly shortens time for refilling new coolant by creating a vacuum in the cooling system.

* The set make work without mess and without introducing airlocks.

* No more time consuming cooling system bleeding and no spills to clean up.

* Simply plug into the workshop air line, attach to the cooling system header tank and create a vacuum.

* Complete the process by attaching the filler hose and opening the valve allowing your pre-mixed coolant to flow into the system.

CH210571

Cooling System Tester Set

Description:

* To use the pump to build up the pressure to test the cooling system.

* Cooling Pump x 1 (Up to 2.5 Bar with quick coupling system)

* Flexible Hose x 1

* Cooling system Adaptors x 21pcs

Application:

* MERCEDES-BENZ, Viano,PORSCHE, FIAT, KIA, MITSUBISHI, SUZUKI Vitara,Samurai, ALFA ROMEO, CITROË, NDACIA, FERRARI, FORD, MINI, NISSAN, PEUGEOT, LAND ROVER, LANCIA, MASERATI, RENAULT, VOLVO, VW-Golf, SEAT, SKODA, OPEL, DAEWOO, CHEVROLET, MAN, BMW, SMART, AUDI, IVECO, MAZDA, SUBARU, TOYOTA, DAIHATSU, HONDA, HYUNDAI, ISUZU, OPEL.

E-mail: chihtai@ms16.hinet.net

CH210571-A Cooling System Tester Set

Description:

* To use the pump to build up the pressure to test the cooling system.

* Cooling Pump x 1 (Up to 2.5 Bar with quick coupling system)

* Flexible Hose x 1

* Cooling system Adaptors x 5pcs

Application:

* MERCEDES-BENZ, Viano, PORSCHE, FLAT, KIA, MITSUBISHI, SUZUKI Vitara,Samurai, ALFA ROMEO, CITROE, NDACIA, FERRARI, FORD, MINI, NISSAN, PEUGEOT, LAND ROVER, LANCIA, MASERATI, RENAULT, VOLVO, VW-Golf, SEAT, SKODA, OPEL, DAEWOO, CHEVROLET, MAN.

CH120802

Universal Radiator Pressure Tester Kit

Description:

* Cap0:Temperature

* Cap1:Pressure testing pump with gauge

* Cap2:GM (Cadillac)

* Cap3:Benz' GM (Buick)' Jeep

*Cap4:Peugeot,Subaru,Chrysler,Acura,GM (NOva,Spectrum,Sprint),Mitsubishi,Nissan Mazda,Toyota,Infiniti,Geo,Suzuki,Isuzu,Ford

* Cap5:Honda,Toyoyta,Suzuki,Mitsubishi,Chrysler,Acura

* Cap6:Benz(ML-class),GM(achiva,skylark,gramd am1992~2002)

* Cap7:Volvo,Saab,Sterling,Citron,Renault,Flat,Alfa,Jeep

* Cap8:VW(Vento,T4,Passat-1996,Golf,Beetle,Sharan)

* Cap9:Audi(A4,A5,A6),BMW345,VW(passa 1997~2002)

* Cap10:BMW

* Cap11:Audi,VW

* Cap12:Ford,International,Land Rover , Opel , Jaguar

* Cap13:Benz(C-class,E-class,S-class)

Operating Instruction:

1.Remove the lid of radiator. If the radiator is in high temperature, wait it cold down or cover wet towel until normal temperature.

2. Select the correct Test Adapter, then screw on the radiator.

3.Attach the correct Test Adapter, then screw on the radiator.

4.Press the Hand Pump to inflate the pressure up to 15~20psi.

Caution：Do not exceed the Max. Pressure of Gauge.

5.Check the Pressure Gauge. If the pointer is down, you must inspect the lines of radiator, then repair or replace the damage parts.

6.After servicing press the release button to release the pressure of radiator until the pressure gauge to zero

7.Before storing：

7-1 Attached the Test Adapter to quick coupler of Hand Pressure Pump, then press the Hand Pressure Pump few times to push remnant water out the Test Adapter.

7-2 Drop pneumatic oil into the air hole of the Hand Pump end to lubricate the piston of Hand Pump

8.Be careful to use this tool and them cleaning.

E-mail: chihtai@ms16.hinet.net

CH120802-NV Radiator Pressure Tester & Vacuum Type Cooling System Kit (25PCS)

Description:

* Set for testing leaks in automotive cooling system and refill new coolant by creating a vacuum in cooling system.

* Includes various adapters for major vehicle brands on market

* Adapters and pump are made of light weight nylon 6-6

* Connectors(blue and black) are for testing pressure caps

* Includes a thermometer for extra safety

Specification:

CH1308241

Testing Tool for Dual Mass Flywheel (DMF)

Description:

* Many vehicle manufacturers choose to equip new models with a Dual Mass Flywheel – and the trend is growing.

* The reasons for this are the technical benefits provided by the DMF as well as the need for increasing noise comfort while reducing emissions of state-of-the-art engines.

* The DMF characteristics are precisely attuned to each vehicle.

* Always check the Dual Mass Flywheel (DMF) when replacing the clutch.

* A worn and defective DMF can damage the newly installed clutch.

* A 100% functional test of the Dual Mass Flywheel includes among other things testing the characteristics of the Arc Springs during compression.

* This testing can only be carried out using a special test facility.

Specification:

* 1pc Slotted Bar

* 1pc Degree Gauge

* 1pc DTI Stand

* 1pc DTI Gauge

* 2pc Ring Gear Locking Dogs

* 3pc Ring Gear Locking Dogs Spacers

* 1pc Degree Gauge Locking Bar

* 2pc M6 Adaptor

* 2pc M7 Adaptor

* 2pc M8 Adaptor

E-mail: chihtai@ms16.hinet.net

CH120802-A Universal Radiator Pressure Tester Kits Operation Instruction

Description:

* This tester kit is used for checking the radiator to see if any water leaked because of the body or the connector not fitted properly or any broken.

* It is tested through pressure increase by using an adapter for closing the master or second inlet of the radiator then pushing the manual pump by hand.

Contents:

* No.0: Needle Thermometer.

* No.1: Manual pump with quick joint & release valve.

* No.2: Universal adpter with 3 rubber rings(used for cars not listed on Nos. 3-5)

* No.3: Japanese R123 adapter-suitable for Benz, GM(Buick) & Jeep.

* No.4: Japanese R134 adapter-suitable for Peugeot, Subaru, Chrysler, Acure, GM(Nova, Spectrum & Sprint), Mitsubishi, Nissan, Mazda, Toyota, Infiniti, Geo, Suzuki, Isuze & Ford.

* No.5: Japanese R125 adapter-suitable for Honda, Toyota, Suzukim Mitsubishi, Chrysler & Acura.

CH120802-B

Universal Radiator Pressure Tester Kits Operation Instruction

Description:

* This tester kit is used for checking the radiator to see if any water leaked because of the body or the connector not fitted properly or any broken.

* It is tested through pressure increase by using an adapter for closing the master or second inlet of the radiator then pushing the manual pump by hand.

Content:

* No.0: Needle Thermometer.

* No.1: Manual pump with quick joint & release valve.

* No.2-A: Connector R123/R124(Black color)

* No.2-B: Connector R123/R125(Blue color)

* No.3: Japanese R123 adapter-suitable for Benz, GM (Buick) & Jeep.

* No.4: Japanese R134 adapter-suitable for Peugeot, Subaru, Chrysler, Acure, GM(Nova, Spectrum & Sprint), Mitsubishi, Nissan, Mazda, Toyota, Infiniti, Geo, Suzuki, Isuze & Ford.

* No.5: Japanese R125 adapter-suitable for Honda, Toyota, Suzukim Mitsubishi, Chrysler & Acura.

CH210579-A Vacuum Pump Brake Bleeding Kit

Description:

* The kit includes the vacuum pump, complete fittings and accessories for vacuum testing and brake bleeding, plus a detailed owners manual.

* The vacuum pump is field repairable.

* Replace worn o-ring, seals and valves with the Vacuum Pump Repair Kit.

CH210509 Vacuum Pump Brake Bleeding Kit

Description:

* The kit includes the vacuum pump, complete fittings and accessories for vacuum testing and brake bleeding, plus a detailed owners manual.

* The vacuum pump is field repairable.

* Replace worn o-ring, seals and valves with the Vacuum Pump Repair Kit.

CH210509-A Vacuum Pump Brake Bleeding Kit

Description:

* The kit includes the vacuum pump, and the gauge can be rotated for 360 degree, complete fittings and accessories for vacuum testing and brake bleeding, plus a detailed owners manual.

* The vacuum pump is field repairable.

* Replace worn o-ring, seals and valves with the Vacuum Pump Repair Kit.

Battery and Electrical

CH1308263

Battery Replacement Driver

Description:

* This driver features a specially curved to fit Dzus and many other coin headed style screws where the slot has a concaved base.

* These style fasteners are found on body panels, cowls, etc, on aircraft, trucks and special purpose vehicles.

* Tip Width: 9/16”(14mm) Length: 5”(125mm)

Material:

* Blade: CR-V

* Handle: PP

CH1308263-A

Battery Replacement Driver

Description:

* This driver features a specially curved to fit Dzus and many other coin headed style screws where the slot has a concaved base.

* These style fasteners are found on body panels, cowls, etc, on aircraft, trucks and special purpose vehicles.

* Tip Width: 9/16”(14mm) Length: 5”(125mm)

Material:

* Blade: CR-V

* Handle: PP + TPR

CH1214257

Screwdriver for Battery Screw Plug- Flat Head

Description:

* This tool is especially designed for loosening and tightening the plastic screw plug on the starter battery.

* Also suitable for the ventilating (locking) screw on the plastic radiator without the risk of damage, for example on BMW vehicles.

* Special length allows universal application in areas with restricted access.

CH1214257-13

CH1214257-18

CH1214342-Z

E-mail: chihtai@ms16.hinet.net

Screwdriver for Battery Screw Plug- Cross Head

Description:

* This tool is especially designed for loosening and tightening the plastic screw plug on the starter battery.

* Also suitable for the ventilating (locking) screw on the plastic radiator without the risk of damage, for example on BMW vehicles.

* Special length allows universal application in areas with restricted access.

* Size: 1.3mm

Screwdriver for Battery Screw Plug- Cross Head

Description:

* This tool is especially designed for loosening and tightening the plastic screw plug on the starter battery.

* Also suitable for the ventilating (locking) screw on the plastic radiator without the risk of damage, for example on BMW vehicles.

* Special length allows universal application in areas with restricted access.

* Size: 1.8mm

Description:

*

CH0812188

Ignition Module Puller

Description:

*For uniform assembly and removal of ignition coils

* The screws must be tightened for mounting.

* The ignition module can be uniformly removed to avoid prevents damage to the ignition module.

* Application range: Chevrolet ans Vauxhall /Opel 3 and 4 cylinder 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, 2, 2 petrol injection engines and Fiat Croma 1.8 L , Alfa Romeo 159, 1.8 L

E-mail: chihtai@ms16.hinet.net

CH1308182

Volvo ECU Removal Tool

Description:

* Removes the ECU from the body mount on following Volvo models:

-C70 Coupe (up to '02) -S60 (up to '09) -S70 & S80 (up to '06) -V70 (up to '08) -V70XC ('00 - up) -XC70 (up to '07) -XC90 & C70 Convertible (up to '05)

* Made from spring steel

CH1214411-AH

Electrical Connector Disconnect Pliers

Description:

* Quickly disconnects electrical connectors without damage.

* Release locking tabs on electrical connectors, component connections and wiring harness connectors.

* The safe and easy way to remove small, thin or recessed connector that’s difficult to work with.

CH1214411-CH

Electrical Connector Disconnect Pliers

Description:

* Quickly disconnects electrical connectors without damage.

* Release locking tabs on electrical connectors, component connections and wiring harness connectors.

* The safe and easy way to remove small, thin or recessed connector that’s difficult to work with.

CH121417-19C Master Terminal Tool Kit

Description:

* Updated kit for most modern vehicles

* Includes newest terminal tools for Audi and Volkswagon

* Specialty tools included for coolant sensors, wiring harnesses and terminal blocks

* Eliminates potential damage to wires and terminal blocks

* Knurled finish handles for superior grip

* Application chart included

CH121406 Auto Computer System Release Tools

Contents:

* CH121406-1-Applicable: BMW, Mercedes, Opel, VW/Audi.

* CH121406-2-Applicable: BMW, Jaguar, Mercedes, Porsche, Saab, Seat, Skoda.

* CH121406-3-Applicable: BMW, Mercedes, Opel, Porsche, VW/Audi.

* CH121406-4-Applicable: Ford

* CH121406-5-Applicable: BMW, Ford, Mercedes, Opel, Porsche, Seat, Skoda, VW/Audi.

* CH121406-6-Applicable: BMW, Ford, Jaguar, Mercedes, Opel, Porsche, Saab, Seat, Skoda, VW/Audi.

* CH121406-7-Applicable: Mercedes

* CH121406-8-Applicable: Ford, Jaguar, Mercedes, Opel, Porsche, VW/Audi.

* CH121406-9-Applicable: Ford, Mercedes.

* CH121406-10-Applicable: Mercedes

* CH121406-11-Applicable: BMW, Ford, Jaguar, Mercedes, Opel, Porsche, Saab, Seat, Skoda, VW/Audi.

* CH121406-12-Applicable: Opel, Renault, Skoda, VW/Audi.

* CH121406-13-Applicable: Ford, Mercedes.

* CH121406-14-Applicable: Ford, Jaguar, Porsche

* CH121406-15-Applicable: BMW, Ford, Mercedes, Opel, Seat, Skoda, VW/Audi.

* CH121406-16-Applicable: BMW, Ford, Jaguar, Mercedes, Opel, Porsche, VW/Audi.

* CH121406-17-Applicable: BMW

* CH121406-18-Applicable: Mercedes

* CH121406-19-Applicable: Citroen, Chrysler, Flat, Ford, Honda, Mazda, Mercedes, Mitsubishi, Opel, Porsche, Renault, Seat, Toyota, VW/Audi.

* CH121406-20-Applicable: Ford

* CH121406-21-Applicable: BMW, Ford, Jaguar, Mercedes, Opel, Porsche, Saab, Seat, Skoda, VW/Audi.]

* CH121406-22-Applicable: Honda, Opel, Toyota, VW/Audi.

* CH121406-23-Applicable: Opel, VW/Audi.

CH1214381-Z

E-mail: chihtai@ms16.hinet.net

Trailer Connector Removal Tool Kit (KNORR-BREMSE)

Description:

* Fast releasing of all electronic connectors on trailer modules.

* EBS Module: narrow surrounding and limited space. Working overhead under the trailer.

Application:

CH1214381-AZ

(KNORR-BREMSE)

Description:

* Fast releasing of all electronic connectors on trailer modules.

* EBS Module: narrow surrounding and limited space. Working overhead under the trailer.

Application:

CH1213205

Oxygen Sensor Tester and Simulator

Description:

* This device is designed to test and to simulate 1V Zirconia and 1V/5V Titania type oxygen sensors.

* The simulation can help user to exam the function of the ECU. Moreover, it can analyze the type of connection wire.

Features:

* Testing 1 ~ 4 wires (with/without heater) oxygen sensor (1V Zirconia, 1V/5V Titania).

* Connection wires analysis (ground, open, heater, ECU power).

* Check the ECU response to the sensor by simulating rich/lean signals.

* LED indication of oxygen sensor signal switching and low power indication.

* With wire piercing clip (easy for connection), 5 minutes auto power off, proper sealed control panel, high strength housing.

CH1213202

Injector Tester

Description:

* By connecting with the 12V vehicle battery, the tester generates four different output signal pulses for user to check the condition of the injector.

* By using the tester, user can check if the injector is clogged, leaking or blasting.

Features:

* Input Power: 12V Vehicle Battery

* Working Environment: 0 ~ 40°C (32 ~ 104°F); < 80%RH

* Storage Environment: -10 ~ 50°C (14 ~ 122°F); < 85%RH

CH1213120-A

Multi-Channel Automotive Noise Finder

Description:

* This tool is helpful to diagnose the defect of the vehicle.

* When the generator is running, it can detect the impact and vibration due to the defect and failure of bearing, gear, valve, crank, cylinder, gear box and vehicle body.

Operation:

* Plug the head-phone connector into the head-phone jack, then clip the four different colour alligator clips around the defect area of the machine.

* Base on the colour and the position of the clips, select the relative channel.

* Switch on the amplifier and turn the volume to hear the sound from the machine.

* Technician can diagnose the machine base on the frequency and the pitch of the sound.

E-mail: chihtai@ms16.hinet.net

CH1213113 Auto Circuit Tracer

Description:

* The main function for the equipment is to searching and diagnosing the short / open circuit of vehicle’s circuit connection, another function is to identify the wire connection from whole vehicle’s circuit connection.

* Suitable for all DC circuits up to 42V

* Power source: 9V battery x2 required

* Indicators: Green LED for power On and Open circuits. Red LED for short circuits.

* Sensitivity: three user selectable sensitivity levels. (Low , Medium, High)

* Connection reference:

CH121332-A 30A Current & Voltage Tester

Description:

* Test kit including:

Testing probe x2

Aligator clip x2

Extension connector x1

Fuse jack adapter x1

Cigarette lighter adapter x1

* Voltage measurement

Range: 1-48V DC

Accuracy: ±1 % or 0.1 reading with 1 decimal place.

Wrong polarity: when user reversely connects the polarity, the display will show “ERR”

* Continuity Test

If the measured resistance is less than 1K ohm, LCD will display “ERR”

Working temperature: 0~50 ℃ (32~122℉)

Storage temperature: -20℃ to 60℃ (-4℉ to 140℉)

Moisture: <70% RH ( Working )；<80% RH ( Storage )

Maximum Height: 7000ft (2000m)

Power: 9V battery x1

* Current Measurement

Maximum loading : 30A/ 48VDC for 10seeconds

Accuracy: ±1 % or 0.1 reading with 1 decimal place.

CHIH TAI Y&S CO., LTD.

CH121331 Endoscope

Description:

E-mail: chihtai@ms16.hinet.net

* This is a helpful auxiliary tool for technician to visually check equipment.

Specification:

* Resolution: 640 x 480’=

* Camera diameter: 8mm

* Operating voltage: 5V

* Picture transmit rate: 30fps

* Waterproof: IP67

* Camera resolution: 300K pixels

* Player software is included in the CD, it support snapshot.

CH1213101

Digital Display Auto Circuit Tester

Description:

* Digital display to read the accurate voltage value.

* Available for 6, 12 & 24V DC system.

* LED indication for power (Red) and ground (Green).

* Stainless steel testing probe.

* Voltage measurement from 5 – 28 V.

* Spring cable, which is able to extend to 3 meter.

* Small testing current, < 10mA.

CH1213110 Auto Circuit Tester

Description:

Testing range: 6~24V

1. Determine the polarity and circuit circumstance (short/open).

2. Activating the components with positive or negative current without jumper wire.

3. Testing the voltage and countinuity of the circuit.

4. Including a long probe(9cm), a Cigarette ligater adpater, a hook-up clip and extension 20ft lead.

CHIH TAI Y&S CO., LTD.

CH1213206 Multi-Function Automotive Tester

Description:

E-mail: chihtai@ms16.hinet.net

* The multi-function automobile tester has backlight LCD display to indicate the measured result.

* It has polarity detection with the LEDs for a positive and negative indication of DC voltage.

* For auto use, the functions included the measurement of DC voltage and current, signal frequency and max/min voltage, resistance, temperature and power providing testing.

Measurement

* Supply voltage: 8-30V DC system

* Voltage measurement range: 0-60V DC

* Current measurement range: 0-5A DC

Operation Environment

* Working temperature: 0-50°C

* Storage temperature: 10-60°C

* Measured temperature: 0-200°C

CH1213107-A Vehicle Battery Tester

Descriptions:

* This is a helpful tester for 12V vehicle battery.

* User is able to check the battery power level and the charging condition with various circumstances.

* It is also able to monitor the alternator condition by very easy procedure.

Features:

* With a Magnetic Board on the back slide to fix on suitable metal sheet of cars easily.

* Voltage Range: DC 6 ~ 16V

* Reverse Polarity Protection: Yes

* Short Circuit Protection: Yes

* Over-Voltage Protection: Yes (Forward DC Voltage <30V for < 10 seconds)

E-mail: chihtai@ms16.hinet.net

CH1213216 Relay Tester

Description:

* Figure out the condition of the relay.

* Speculating the problem in the vehicle.

Specification:

* Power supplied: 12V/24V vehicle battery

* Vehicle relay testing for 3 most popular kind of relays.

* Suitable for 12V/24V vehicle relay.

* Support both 4 pin/5 pin relay.

*Problem pin indication.

Description:

* The tightest terminals will be lifted off without damage to the battery case or posts, because the sharp jaws are able to engage either below or on the sides of terminals.

* The Center screw swivel also makes this puller very effective on alternator bearings.

CH0807104-1

Battery Terminal Puller

Description:

* Use puller to remove the battery terminal clamp without damaging the battery post.

* Puller will even work on corroded spring-type clamps.

CH0807104

Battery Terminal Puller/Alternator Bearing Puller

CHIH TAI Y&S CO., LTD.

CH080704 Battery Terminal &Wiper Pick Up Tool

E-mail: chihtai@ms16.hinet.net

Description:

* To working for battery terminal & windshield wiper...etc.

* The tights at terminals will be lifted off without damage to the battery case or posts, because the sharp jaws are able to engage wither below or on the sides of terminals.

* The centre screw swivel also makes this puller very effective on alternator bearings.

* Travel: 4" long.

CH1214388

Self-Gripping Puller( Wiper arm & Battery terminal)

Description:

* A dual-purpose puller.

* Easily removes windshield wiper arm and battery terminal.

* Can be easily positioned due to its self-gripping spring mechanism.

CH200845-14 14pcs Completely Alternator Repair Set

Description:

* Use on Nippon Denso, Valeo, Bosch and Marelli alternators.

Content:

* 3pcs x 1/2"D Combination Drivers: -31 Spline x M10 Spline x 15mm Hex -31 Spline x T50 Star x 15mm Hex -17mm Hex (outer) x 10mm female Hex (inner)

* 3pcs Sleeves: -32mm Male Hex with 3 pin Drive -33 Spline Drive x 15mm Hex (outer) -28mm Male Hex x 15mm Male Hex Drive

* 1pc Bit Holder 10mm Hex x 1/2"D

* 1pc Socket 10mm 12 PT Female x 1/2"Dr.

* 2pcs Double ended Ring Spanners: 15mm, 10mm

* 3pcs x 75mm long x 10mm Hex Drive Bits: M10 Spline, 8mm Hex and T50 Star * 1pc Bits 30mm x 10mm Hex Drive x 8mm Hex

* Material: Bit- S2 Steel, Sockets and spanners- Chrome Vanadium

CHIH TAI Y&S CO., LTD.

CH0812353

Terminal Block Removal Tool

Description:

E-mail: chihtai@ms16.hinet.net

* Press the lock button of coupler with front claw to remove the coupler.

* Ultra- compact design can be easily used in a limited space.

CH200845-30

30pcs Completely Alternator Repair Set

Description:

* Complete kit for Bosch and Denso type alternator pulleys.

CH200845-22

22Pcs Completely Alternator Repair Set

Description :

* Design for Bosch and DENSO Type Alternator Pulleys.

Features :

* Removes and installs press-on-type belt drive accessory pulleys.

* Works with hand tools or an impact gun.

* Interchangeable components to work on VW, Audi, Seat, Mercedes Benz, Renault, BMW, Ford Renault, Fiat, etc….

Contents :

* 3pcs Combined Socket for Alternator -T50 x 113mmL Socket -M10 x 113mmL Socket -3/8”Dr.xM10x80mmL W/ Ø14x33T

* 1pc Bit socket: M10x140mmL

* 3pcs Teeth Socket: -15mm HEX x 33 teeth -22mm HEX x 33 teeth -15mm Hex x33 teeth

* 2pcs HEX Socket:22mm &17mm

* 3pcs Hex socket: 22x28 mm, 19x28 mm, 21x28mm

* 1pc 35mm Round Socket W/4 pins

* 1pc 38mmHex W/3Pins

* 1pc 1/2” Dr. SQ.(F) x 10mm Hex.(F) Bits Adaptor

* 1pc M10xH12x64L bit

* 6pcs 10mm(Hex Shank) x 75mmL CR-V bit: T40, T50, M8, M10, H8, H10

CH091218

Super Mini Booster

Feature:

CH091221

CH091223

E-mail: chihtai@ms16.hinet.net

* Vehicle range: 4/6/V6/V8 cylinder petrol up to 6.5 litre and up to 2.5 litre to 3.0 litre diesel vehicles.

* Able to start 6000c.c. SUVs repeatedly without battery

* Emergency start of 2000c.c. vehicles 100 times

Specification:

* Size: 17(L) x 18(W) x 15.5cm(H), weight:5.1kg

* Instant max current: 1200 ampere.

* Charging power: AC 100-240V adaptor, 50/60Hz, CE/UL/PSE, etc/DC 12V, Via car cigarette lighter, solar panel

* Rechargeable battery: Acid battery DC 12V/14AH

Equipped

* 5V USB port x2

* Bright LED lights x 2

* 12V (DC)/ Max. 10A

* Voltmeter

Super Mini Booster

Feature:

* All 12V vehicles

Specification:

* Size: 19(L) x 18(W) x 17cm(H), weight:6.3kg

* Instant max current: 1800 ampere.

* Charging power: AC 100-240V adaptor, 50/60Hz, CE/UL, etc

* Rechargeable battery: Acid battery DC 12V/20AH

Equipped

* Bright LED lights x 2

* Voltmeter

Super Mini Booster

Feature:

* Vehicle range: 4/6/V6/V8 cylinder petrol up to 6.5 litre and up to 2.5 litre to 3.0 litre diesel vehicles.

* Able to start 6000c.c. SUVs repeatedly without battery

* Emergency start of 2000c.c. vehicles 100 times

* Measurement the battery

Specification:

* Size: 18(L) x 18(W) x 16cm(H), weight:5.1kg

* Instant max current: 1200 ampere.

* Charging power: AC 100-240V adaptor, 50/60Hz, CE/UL/PSE, etc/DC 12V, Via car cigarette lighter, solar panel

* Rechargeable battery: Acid battery DC 12V/14AH

Equipped

* 5V USB port x2

* Bright LED lights x 2

* 12V (DC)/ Max. 10A

* Voltmeter

Chassis and Brake System Repair Tool

Brake System Tools

CH0812369-C

Hydraulic Brake Caliper Compressor Tool

Description:

* Designed for floating calipers fitted with single or twin pistons.

* Pads can be reset when rewinding the screw of hydraulic ram at same time that is for taking out tools from caliper easily.

* A centrally located hydraulic ram evenly spreads the force in a parallel manner to prevent misalignment of the two pistons.

* Also for fixed calipers fitted with twin or quad 6,8,10 pistons.

* Free-degree pad swing allows access at any angle.

* Maximum spread: 36mm to 73mm

3Pairs Pad size: - 90*60mm -150*60mm -180*60mm

CH0812369-L

Hydraulic Brake Caliper Compressor Tool

Description:

* Designed for floating calipers fitted with single or twin pistons.

* Pads can be reset when rewinding the screw of hydraulic ram at same time that is for taking out tools from caliper easily.

* A centrally located hydraulic ram evenly spreads the force in a parallel manner to prevent misalignment of the two pistons.

* Also for fixed calipers fitted with twin or quad 6,8,10 pistons.

* Free-degree pad swing allows access at any angle.

* Maximum spread: 36mm to 73mm

3Pairs Pad size: - 90*60mm -150*60mm -180*60mm

CH0915122

Brake Calliper Guidance Thread Repair Set (For VAG)

Description:

* For repairing the guide pin threads in the wheel bearing housing.

* With disassembly of guide pins while changing the brake pads the internal threads are frequently destroyed.

* The defective threads are repaired professionally and quickly with a heavy duty rustproof high-grade steel threaded bush.

Contents:

* Replacement bushes with copper ring M9 x 1.25(packing unit 10pcs)

* Special core drill

* Special tap M9 x 1.25

* Hex key 7mm

CH200841-M12 15Pcs

Brake Caliper Thread Repair Set (For VAG)

Description:

* Designed to re-thread the brake caliper

* Tap size: M12 x 1.25

* For New VAG since 2009

Pins

Description:

* They are used on Radially mounted brake calipers to allow safe replacement of the brake pads while reducing the risk of the caliper hitting and damaging the ceramic brake discs.

* The pins are manufactured with a reduced diameter approximately half way up their length which provides a step for the caliper to sit on while the pads/discs are replaced.

* Application range: PORSCHE Cayenne , VW Touareg , AUDI Q7, Equivalent to OEM T10439 CH0812222-A

CH200834-1015

Brake Caliper Socket (Porsche)

Description:

* Special for release the bolt from brake caliper when change the new brake pads.

* Size: 3/8”dr. x 10PT x 15mm

* Suitable for Porsche

CH200834-1020

Brake Caliper Socket (Porsche & Audi A8)

Description:

* Special for release the bolt from brake caliper when change the new brake pads.

* Size: 1/2”dr. x 10PT-20mm

* Suitable for Porsche and AUDI A8

CH200834-722

Brake Caliper Socket (Audi S5 and Q5)

Description:

* Special for fix brake caliper nut.

* Size: 1/2”dr. x 7PT x 22mm

* Suitable for Audi S5 and Q 5

CH200834-714

Brake Caliper Socket (Audi A5 A6L Q5 Q7)

Description:

* Special for fix brake caliper nut.

* Size: 1/2”dr. x 7PT x 14mm x50L

* Suitable for Audi A5 A6L Q5 Q7

CHIH TAI Y&S CO., LTD.

CH1308289 3/8” Drive Brake Caliper Adapter

Description:

E-mail: chihtai@ms16.hinet.net

* This special tool has been designed to attach to brake caliper tools on the market using 3/8” square driver.

* When attached to a 3/8” drive main body brake caliper tool the following brake pistons can be turned and pressed into the brake caliper.

* Suitable for Mazda 3 2004 & later, Mazda 5 2006 & later, Mini all 2002 & later, Volvo C30 2007 & later.

CH100909 3/8”Drive Brake Caliper Adapter(VAG)

Description:

* Adaptor specifically introduced for VAG pistons on models with EPB •3 pin brake piston wind back tool

* For use on VAG models, Renault Megane and Scenic and Volvo fitted with Electronic Park Brakes

* To be used in conjunction with electronic park brake tools but not instead of them

* 3/8"Dr.

* Out side diameter 39mm, Pin PCD 32mm, Pin Diameter 3mm

CH200838

Brake Caliper File

Description:

* Designed to remove the dust on the brake calipers.

* Size: 14 x 150mmL

* Material: SK5 steel file

CH200855

11Pcs Special Brake Caliper Nut Socket Set

Description:

* Design for fix brake caliper nut.

Applications:

* Audi, BMW, Ford, Mercedes Benz, Porsche, Volkswagen Contents:

* 1/4"Dr. Bit: 9mm x 20mm

* 3/8"Dr. Bits: 7mm x 24mm, 8mm x 24mm , 9mm x 50mm 7mm x 65mm, 7mm x 92mm, 11mm x 100mm

* 3/8"Dr.Socket:15mmx10PT

* 1/2"Dr. Socket: 11.5mm x 50mm, AS22 x 48mm ,20mmx10PT

CH200837-7 7Pcs Brake Caliper Wing Tool Set

Content:

* 1pc right rotating caliper (with right side thread)

* 1pc disc

* 5pcs 13/32” adaptors, with 3/8”dr. inner 4-pt

* 2pcs H8 adaptor

* 1pc 10mm gear wrench

Application:

* Suitable for Inveco daily, VW

CH0915512

Brake Caliper Piston Rewind Tool Kit (for Tesla)

Description:

* This tool set designed for tesla rear brake caliper piston rewind.

* Supplied with both left and right handed winder enabling the return of the brake piston into the caliper delivering clearance for the new brake pads.

Content:

* 1pc rotating caliper with 3/8”dr. (right & left side threaded allow)

* 1pc backing pad

* 2pcs adapters for braker assemblage

CH1308164

Brake Disc Measuring Tool Set

Description:

* Gauge stand with 3-point connection for the assembly of the bumper

* Ideal for identifying of vertical and lateral wobble on the brake disk

* Transverse arm with joint and fine adjustment

* Includes dial gauge and micrometer for identifying wear limit

* Universal usage

* Simple handling

CHIH TAI Y&S CO., LTD.

CH200837-50 50Pcs Brake Caliper Wing Tool Set

Feature:

E-mail: chihtai@ms16.hinet.net

* Universal brake caliper piston wind back tool essential during regular brake pad services

CH120844-15 15Pcs Brake Caliper Wind Back Tool Set

Feature:

* Universal brake caliper piston wind back tool essential during regular brake pad services

* Includes one right threaded manual wind back tools

* Provided with 13 adapters, fitting a wide range of vehicles

Feature:

* Universal brake caliper piston wind back tool essential during regular brake pad services

* Includes two manual wind back tools for right and left threaded brake pistons

* Includes 15 adapters, fitting a wide range of vehicles

Back Tool Set

Feature:

* Designed to make disc brake services faster and energy saving.

* Tool can be turned left-and right-ward-suitable for regular and reverse-threaded pistons.

* Pneumatic powered tool is able to wind pistons back simply pressing a button.

* Includes 15 adapters, fitting a wide range of vehicles.

CH120844-18 18Pcs Brake Caliper Wind Back Tool Set

CH120809 16Pcs Air Power Brake Caliper Wind

CH200846 6Pcs Brake Bleeder Wrench

Feature:

CH1208102-T

E-mail: chihtai@ms16.hinet.net

* For removing of the brake caliper nut to change brake.

Content:

* Length:175mmL

* Size:1/4”Sq. x 10mm Sq. 1/4”Sq. x 5/16” OE 8mm Hex x10mm Hex 9mm Hex x11mm Hex 1/4” Hex x 7mm Hex 7/16”OE x11/32”Sq.

Brake Pressure Bleeder Adapter Set (for Tesla)

Feature:

* Kit specially designed for performing power brake bleeding on Tesla vehicles

* Adapters for Tesla Model S& X, Tesla Model 3 & Y

* Metallic adapter holds pressure up to 2.5 bar/ 36psi

* Compatible with most brake pressure bleeder machines or tank pumps

Application:

* Model S: 2012-2021

* Model 3: 2017-2021

* Model X: 2015-2021

* Model Y: 2020-2021

CH050347 Brake Disc Remover Kit

Description:

* No hammering shock effect on the wheel bearing, electronic sensors, suspension, ball-joint etc.

* The auto adjust jaw let you install the tool easily, quickly.

* Put the nut on the hub to prevent fall down when release!

* Range : 170~400 mm

E-mail: chihtai@ms16.hinet.net

CH0915403 Drum Brake Lining Hold Tool

Description:

* The tool is applied to holding brake lining without removing brake.

* Lining before replacing brake cylinder

* Easy and save repair time to replace brake cylinder

* Hex: 17mm

* Square: 3/8”

* Capacity: 25-142mm

CH031278-I

Drum Brake Shoe Spreading Tool

Description:

* Adapt to 3/8"Dr and 14mm Hex allowing use of a ratchet or spanner.

* Brake shoe spreader range18mm to 105mm.

* Spreads and hold the brake shoes apart allowing removal of the brake cylinder, etc.

* Eliminates the need to remove the brake shoes or apply the handbrake.

* Eliminates the need to dismantle the brake shoe assembly leaving hands free to work.

CH031278-F

Dual Piston Press

Description:

* Dual Piston Press is used to press-in single and dual piston brake calipers.

* Its rugged design ensures a longer and stronger tool life.

* The tool features a single piece operation, eliminating nuts and bolts to assemble and disassemble brakes.

* Rugged Design, Longer and Stronger Tool Life

* Universal Application on Cars, Light and Heavy Trucks

* Single Piece Operation Eliminates Nuts and Bolts to Assemble and Disassemble Brakes

E-mail: chihtai@ms16.hinet.net

CH1214379 Air Line Disconnect Pliers

Description:

* Disconnect the air line quick connector on heavy duty vehicles’ air brake system.

* Easy to loosen the air line as dia. 6, 8, 10, 12mm

* Idea for the straight type of quick connector.

CH031278-E

Speedy Brake Piston Spreader

Description:

* Compresses Brake Pistons In Seconds.

* Squeeze the handle and the fast acting plunger compresses disc brake pistons in seconds.

* Makes brake pad replacement an easy job.

CH091522 Disc Brake Piston Spreader

Description:

* Fits in brake caliper to push back pistons for new brake pads installation.

CH031278-J

Universal Brake Pad Spreader

Description:

* Allows installer to easily compress both pistons at once facilitates both single and dual piston applications.

* Apply for Ford F150 & F250 Ford & GM front wheel drive vehicles.

E-mail: chihtai@ms16.hinet.net

CH031278-L

Disc Brake Pad Spreader

Description:

* Design to work on criterion and fourposition caliper disc brakes, this tool will abbreviate installation time.

* Disc brake pad installation is much simpler when you are using this spreader.

* Fits between the two new pads being installed, then expands to retract the pistons.

* Proper for using on most ATE, Bendix, Delco,Girling brake calipers.

CH1214397-6

Mercedes Brake Shoe Retaining Spring Tool

Description:

* Operating retaining springs of the hand brake shoes(rear disc brakes).

* Easy to operate the retaining springs which behind the wheel hub.

Application:

* Mercedes V-class(Vito/Viano): Type 638(1996~2003), Type 639(2003~2014), Type 447(2014~)

CH200831

Brake & Fuel Pipe Inspection Tool

Feature:

* Specially designed for the removal of corrosion from brake and fuel pipes for fast and thorough inspection.

* Features 12 cleaning edges for different sizes and types of pipes.

* Includes curved cleaning edges for hardto-reach areas.

* Size: 3.5, 4, 4.75, 3/16”

CH2008105

Brake Disc Lip Removal Tool Kit

Description:

* An easy to use kit for the removal of the corrosion and lip that builds up on brakes discs & hubs.

* Extremely useful to remove the metallic lip around the edge of the disc.

* Comprises of a handle, scraper & tool steel blade.

* The handle simply bolts onto the wheel hub. Turn whilst holding the scraper against the brake disc to "machine" off rust & corrosion.

* By unscrewing the handle on the scraper, the head jaws are released & the blade can be either replaced, rotated or stored within the head for additional protection.

CHIH TAI Y&S CO., LTD.

CH0812354

Carbide Scraper Set, 1-1/4" and 5/8"

Description:

E-mail: chihtai@ms16.hinet.net

* Designed to remove gasket residue from steel and aluminum heads and manifolds, along with carbon build-up and even rust.

* Can be used to clean disc brake caliper slides.

* Tungsten carbide tips has two blade widths, 1-1/4" and 5/8" to work on many applications.

* Use caution when using scraper on aluminum to avoid scratching the surface.

CH200867 5Pcs T Handle with Reamer for ABS Sensor

Description:

* Length: 1/4”dr. x 125mmL

* Reamer size: -14x 42.5L, for BMW E38/E39/E52/E60/E61/E63/E64/E65/E66/E67/E70/E71 -18x33.5L, for Mercedes Benz A-class, Mazda, Toyota and Ford -15x31.5L, for VW, Audi, SEAT, Skoda, BMW E36+E46 -18x42.5L, for VAG and NFZ

* Reamer size: HSS

CH200867-7R

7Pcs Flexible Ratchet Handle with Reamer for ABS Sensor

Description:

* Length: 1/4”dr. x 125mmL

* Reamer size: -14x 42.5L, for BMW E38/E39/E52/E60/E61/E63/E64/E65/E66/E67/E70/E71 -15x33.5L, for Mercedes Benz A-class, Mazda, Toyota and Ford -18x31.5L, for VW, Audi, SEAT, Skoda, BMW E36+E46 -18x42.5L, for VAG and NFZ -10x133, for WV-Golf V, Polo new, T5,Skoda, Fabia, Seat lbiza, Opel Insignia

* Reamer size: HSS

* Drill dia. 8 x 180mmL, VW T5

* Drill dia. 10 x 133mmL

CH091502 8Pcs Brake Tool Set

Description:

* Contains the most popular brake tools used for servicing drum brakes on many import & domestic vehicles.

* Includes three different style brake spoons for adjusting drum brakes, five different brake spring tools for servicing drum brake shoes.

Contains:

* Brake spring pliers.

* Brake spring removal tool (fits 5/8" dia. spring)

* Brake spring removal tool (fits many import vehicles)

* Brake return spring removal tool

* Brake spring removal tool (fits 3/4" & 13/16" dia. spring)

* Mini brake adjusting spoon

* Brake adjusting spoon

* Brake adjusting spoon

CH0911155

Benz Parking Brake Installer

Description:

* For pressure spring of parking brake.

* Application: All Mercedes models.

CH121431

High-Quality Brake Tool Set

Description:

* Brake Line Flare Nut Wrenches : For screwed connections of brake lines at the front and rear axle.

* Brake Spring Pliers : For installing and removing the brake shoe recuperating spring on riveted brake linings.

* Brake Spring Pliers : For glued and riveted brake linings.

* Screwdrivers with Impact : For brake disc fixing screws.

* Screwdriver Sockets : for brake calliper screws

* Screwdriver Sockets : for brake calliper screws

* Assembly tool : For installing and removing fixing springs of the handle brake shoes on passenger cars with disc brakes.

* Screwdriver Socket with Universal Joint: For calliper screws.

* Special Tool for Brakes: For installing and removing spring plates and the holding device of brake linings on drum brakes.

* Brake Calliper Brush : For the removal of brake dust and dirt from the brake calliper.

* Brass Brake Calliper Brush : For cleaning aluminium brake callipers.

* Assembly Tool: For installing and removing the draw spring of hand brake shoes.

* Brake Cable Spring Pliers: For installing and removing hand brake cables of the drum brake.

* Brake Calliper File: For the removal of brake dust, rust and dirt from the brake calliper.

* With integrated flat scraper for removing crude residues.

CH1214253

Toyota Rear Parking Brake Spring Tool

Description:

* This application requires a smaller brake spring tool with more reach.

* Special tip is designed to engage the shoe hold down spring cup on Toyota vehicles.

* Applicable for 2000- current Toyota Camry, Tacoma, Tundra, FJ Cruiser, 4Runner, and Land Cruiser.

CH1214126-A

CH091508

Brake Cable Pliers

Description:

* To remove and replace the Hand Brake Cable.

* The Pliers compress the return springs so far that the cable may be easily removed and replaced.

* Suitable for VW, Audi, BMW, Nissan, Peugeot, Renault, Rover, Seat, etc.

* Length: 225 mm

Brake Shoe Spreader Pliers

Description:

* Time saving tool significantly reduces the time it takes to remove & install brake wheel cylinders & / or rubber boot.

CH1214254

Pipe Deburring Tool (Internal /External)

Description:

* Internal/ external deburring tool.

* For ensuring brake pipes are effectively deburred before fitting.

* Ideal for brake pipe repair work on/off the vehicle.

* Size range: internal 3-12mm；external: 4-14mm.

CHIH TAI Y&S CO., LTD.

CH1308143

Brake Pedal Locking Device

Description:

E-mail: chihtai@ms16.hinet.net

* Ideally suited to setting the brake pedal in the desired position.

* For obstructing the seat or the steering wheel.

* Allows for a constant brake pressure over a long time thanks to internal springs.

* Ideally used when testing the tightness on hydraulic braking systems, testing and adjusting brake force regulators or brake force limiters.

CH0812182

Brake Servo Release Tool

Application:

* Separating brake pedal from brake servo

* Engine/Assembly group: Brake system

* Reference: Volkswagen-Passat 2015-2016, Volkswagen-Phaeton

CH0812182-1

Brake Servo Release Tool

Description:

* Used to separate the brake servo push rod from the brake pedal.

* Application: Bora A4 [1998-2008]

Volkswagen Beetle & more.

* Model: T10006A

CH0812182-2

Brake Servo Release Tool

Description:

* Used for separating brake servo push rod from brake pedal on Audi Q5 2009>.

* Model: T40136

CH0812182-3

Brake Servo Release Tool

Description:

* For separating brake servo push rod from brake pedal.

* Applicable: Porsche – Cayenne, Volkswagen - Touareg 2003 >

CH1308176 Brake Pad Thickness Adjust Ring Tool

Description:

* The tool is kind of neat.

* You just push it into the hole on the caliper and read the wear.

CH121469-PT Brake Lining Thickness Gauge (Plastic)

Description:

* Color coded brake gauge identifies thickness levels for lining inspection.

CH121456 Air Brake Service Kit

CH1214259

Description:

* This kit includes the tool needed to remove the air brake push rod clevis pins, and both manual and automatic slack adjusters found on class 7 & 8 tractor and trailer brake systems.

Accelerator Pedal Depressor

Description:

* For one man operation, allow engine speed to be set during automotive repair work.

* Operation:

1. Fix the tool on the brake pedal.

2. There are two adjustment holes, use the adjustment screw to fine-tune the RPM level

CH1214333

Brake Line Staple Tool Set

Description:

* Size: 3/16” (4.75mm) & 1/4” (6.3mm)

* A brake line can consist of many angles that should be correct for the new line to fit.

* Here you can easily clamp both the new and old lines so you can make an exact copy.

* For steel, cooper and plastic coated brake line with 3/16” (4.75mm) or 1/4” (6.3mm) diameter.

CHIH TAI Y&S CO., LTD.

CH081239 Brake Spring Pliers

CH121431-A Brake Tool Set

E-mail: chihtai@ms16.hinet.net

CH0812105

Brake Adjusting Spoons Set

Description: Item No. Blade Width Overall Length inch/mm Make CH0812105-A 1/2” and 1/2” 6” / 152.4mm Chevrolet CH0812105-B 17/32” and 17/32” 9” / 228.6mm Olds mobile

CH0812105-C 3/4” and 3/4” 9” / 228.6mm Olds mobile CH0812105-D 5/8” and 9/16” 9” / 228.6mm Olds mobile

CH0812105-E 1/2” and 1/2” 16-3/4” / 425.5mm Trucks

CH0812358

Petrol Engine Timing Checking Gauge

Description:

* This belt measurement gauge is suitable for the PSA1.0 and 1.2 liter engines found in a range of PSA and some Toyota vehicles.

* The timing belt runs in oil and it has been found to degrade over time which results in the timing belt swelling as it starts to separate, the tool can fast and accurate way to check for belt degradation.

3Pcs Brake Bleeder Wrench with Check Valve

Brake Bleeder Wrench, 6 point

* Item No.: CH090975-K6-38, size:3/8”

* Item No.: CH090975-K6-7, size:7mm

* Item No.: CH090975-K6-8, size:8mm

* Item No.: CH090975-K6-9, size:9mm

* Item No.: CH090975-K6-10, size:10mm

* Item No.: CH090975-K6-11, size:11mm

* Item No.: CH090975-K6-12, size:12mm

Brake Bleeder Wrench, 12 point

* Item No.: CH090975-K12-38, size:3/8”

* Item No.: CH090975-K12-7, size:7mm

* Item No.: CH090975-K12-8, size:8mm

* Item No.: CH090975-K12-9, size:9mm

* Item No.: CH090975-K12-10, size:10mm

* Item No.: CH090975-K12-11, size:11mm

* Item No.: CH090975-K12-12, size:12mm

6pcs Brake Bleeder Adapter & Wrench with Check Valve

Feature:

* Built-in wrench & socket into one convenient makes loosening and tightening easy.

* Ideal for bleeding brake system and hydraulic clutch system without removing the wheels.

* 1.2M silicon hose with check valve for safety operating.

* For universal bleeder nipples.

* High quality material internal seal for long life.

Option:

* Item No.: CH090974-7NK6, 6 point, size: 7, 8 , 9, 10,11, 12mm

* Item No.: CH090974-7NK12, 12 point, size: 7, 8 , 9, 10,11, 12mm

7pcs Brake Bleeder Adapter & Wrench with Check Valve

Feature:

* Built-in wrench & socket into one convenient makes loosening and tightening easy.

* Ideal for bleeding brake system and hydraulic clutch system without removing the wheels.

* 1.2M silicon hose with check valve for safety operating.

* For universal bleeder nipples.

* High quality material internal seal for long life.

Option:

* Item No.: CH090974-7NK6, 6 point, size: 7, 8 , 9, 10,11, 12mm, 3/8”

* Item No.: CH090974-7NK12, 12 point, size: 7, 8 , 9, 10,11, 12mm, 3/8”

Brake Bleeder Wrench with Check Valve

Brake Bleeder Wrench with check valve, 6 point

* Item No.: CH090974-K6-38, size:3/8”

* Item No.: CH090974-K6-7, size:7mm

* Item No.: CH090974-K6-8, size:8mm

* Item No.: CH090974-K6-9, size:9mm

* Item No.: CH090974-K6-10, size:10mm

* Item No.: CH090974-K6-11, size:11mm

* Item No.: CH090974-K6-12, size:12mm

Brake Bleeder Wrench with check valve, 12 point

* Item No.: CH090974-K12-38, size:3/8”

* Item No.: CH090974-K12-7, size:7mm

* Item No.: CH090974-K12-8, size:8mm

* Item No.: CH090974-K12-9, size:9mm

* Item No.: CH090974-K12-10, size:10mm

* Item No.: CH090974-K12-11, size:11mm

* Item No.: CH090974-K12-12, size:12mm

3Pcs

Brake Bleeder Wrench with Check Valve

Description:

* Built-in wrench & socket into one convenient makes loosening and tightening easy.

* Ideal for bleeding brake system and hydraulic clutch system without removing the wheels.

* 1.2M silicon hose with check valve for safety operating.

* For universal bleeder nipples.

* High quality material internal seal for long life.

* Invention patented in TW.DE.JP.UK.USA.....etc.

Option:

* Item No.: CH090974-K6, 6 point, size: 8 .10.11mm

* Item No.: CH090974-K12, 12 point, size: 8 .10.11mm

5Pcs

Brake Bleeder Wrench with Check valve

Description:

* Built-in wrench & socket into one convenient makes loosening and tightening easy.

* Ideal for bleeding brake system and hydraulic clutch system without removing the wheels.

* 1.2M silicon hose with check valve for safety operating.

* For universal bleeder nipples.

* High quality material internal seal for long life.

* Invention patented in TW.DE.JP.UK.USA.....etc.

Option:

* Item No.: CH090974-5K6, 6 point, size: 7, 8 , 9, 10,11mm

* Item No.: CH090974-5K12, 12 point, size: 7, 8 , 9, 10,11mm

6Pcs Brake Bleeder Wrench with check valve

Description:

* Built-in wrench & socket into one convenient makes loosening and tightening easy.

* Ideal for bleeding brake system and hydraulic clutch system without removing the wheels.

* 1.2M silicon hose with check valve for safety operating.

* For universal bleeder nipples.

* High quality material internal seal for long life.

* Invention patented in TW.DE.JP.UK.USA.....etc.

Option:

* Item No.: CH090974-6K6, 6 point, size: 7, 8 , 9, 10,11, 12mm

* Item No.: CH090974-6K12, 12 point, size: 7, 8 , 9, 10,11, 12mm

7Pcs Brake Bleeder Wrench with check Valve

Description:

* Built-in wrench & socket into one convenient makes loosening and tightening easy.

* Ideal for bleeding brake system and hydraulic clutch system without removing the wheels.

* 1.2M silicon hose with check valve for safety operating.

* For universal bleeder nipples.

* High quality material internal seal for long life.

* Invention patented in TW.DE.JP.UK.USA.....etc.

Option:

* Item No.: CH090974-7K6, 6 point, size: 7, 8 , 9, 10,11, 12mm, 3/8”

* Item No.: CH090974-7K12, 12 point, size: 7, 8 , 9, 10,11, 12mm

Wrench w/Check Valve Set

Description:

* Ideal for bleeding brake system and hydraulic clutch system without removing the wheels.

* Brake bleeder socket with check valve prevents air backflow into brake system.

* The ratchet wrench with multi-size socket to make loosening and tightening easily.

* Use on any vehicle, SUV, light truck and motorcycle brake caliper.

* Socket size: 7, 8, 9, 10, 11mm (optional size: 12mm and 3/8")

* Provide 1-meter silicone tube is easy to receive the discharged waste oil into the oil pot.

CH0909214-K

Replaceable Brake Bleeder

Power Steering System Tools

CH121462-AS Inner Tie Rod Removal Set

Description:

* Remove and install inner tie rods without removing steering gear.

* Adapters fit into the tie rod socket. 1/2" drive ratchet fits drive end.

* Kit services both old and new style inner tie rods.

* Use 520 sockets alone to work on older Ford and Chrysler vehicles.

* Use socket and 1-3/16" adapter for Ford FWD vehicles with rack and pinion power steering with new style tie rods, use socket and 1-5/16" adapter for Ford RWD and most Chrysler vehicles with rack and pinion power steering with new style tie rods.

* The socket with the 1-7/16" adapter services GM and Chrysler car with Saginaw steering gear.

CH1214261

Power Steering Evac Adapter Kit

Description:

* Power steering evac adapter for removing trapped air from automobile power steering systems.

* The adapter was developed to reduce bleed time following power steering repairs.

* Universal cone-shaped rubber body that adapts to the varying diameters of many automotive power steering reservoirs to form an airtight seal when vacuum is applied.

* The air bubbles can be loosened by simply working the steering.

* Size of adapter: 16-42mm and 48-58mm.

CH121463

GM Power Steering Pump Pulley Installer

Description:

* Easily installs power steering pump pulley without damage to pump shaft or pulley.

* Required tool for: 1988 thru current GM Quad 4 engines; 1990current Chevrolet, Lumina APV, Oldsmobile, Silhouette, and Pontiac Trans, Sport mini vans; 3.1L V6 engines on 1991 -current Chevrolet Lumina sedans, Pontiac Grand Prix, Oldsmobile Cutlass Supreme and Buick Regal.

CHIH

E-mail: chihtai@ms16.hinet.net

CH121464 Pulley Puller And Installer Set

Description:

* Remove pressed-on alternator and power steering pulleys on late-model GM, Ford and Chrysler engines.

* The threaded end installs late-model GM alternator and power steering pulleys. Including Quad 4. Reverse the jaws to pull the alternator internal bearing. The puller fits some AMCs.

*Replacement part: CH121464-01 Puller Body (Letter A)

*Replacement part: CH121464-02 Jaw and Sleeve Assembly (Letter B)

*Replacement part: CH121464-03 Jackscrew (Letter C)

*Replacement part: CH121464-04 Button (Letter D)

*Replacement part: CH121464-05 Bearing and Was her (Letter E and F)

*Replacement part: CH121464-06 Puller Pin for Quad 4 (Letter G)

*Replacement part: CH121464-07 Screw Installer for Quad 4 (Letter H)

*Replacement part: CH121464-08 Puller Pin for GM 3.1 (Letter J)

*Replacement part: CH121464-09 Screw Installer for GM 3.1(Letter K)

*Replacement part: CH121464-10 Screw Installer for Ford 4.6 (Letter M)

*Replacement part: CH121464-11 Screw Installer for Others (Letter N)

CH1214242-B

Special Steering Wheel Puller

Description:

* For Opel, Ford and many other cars.

* Long and short pulling arms.

*CH1214242-BL long pulling arm. Length: 135mm. CH1214242-BS short pulling arm. Length: 87mm.

CH121457

Steering Wheel Remover/Lock Plate Compressor Set

Description:

* Removing steering wheels of most domestic and imported vehicles, with or without telescoping tilt steering columns, is easy with this new set.

* You get the steering wheel puller, including five sets of cap screws needed for various thread requirements. The steering wheel lock plate compressor is also included, to compress the steering wheel lock plate to remove or install the snap ring. It accesses the turn signal switch and S.I.R. modules on current GM vehicles.

* Also works on older GM, AMC, and Chrysler vehicles with tilt or conventional steering columns.

* Contained in convenient plastic storage tray.

E-mail: chihtai@ms16.hinet.net

CH050309

Universal Steering Knuckle Spreader Tool

Description:

* This tool is used to spread the steering knuckle to enable the removal and fitting of shock absorbers without the risk of damaging the aluminum or cast iron knuckle.

* The tool is adjustable and suitable for steering knuckles with either a centralised slot or a non centalised slot.

* Mad of durable chrome-moly steel for added strength.

* It can work on a wide range of vehicles including Audi/BMW/Citroen/ VW Golf/ Passat/ Ford/ Skoda/ Seat/ Renault/ Peugeot and Japanese vehicles.

CH031295-C

Inner Tie Rod Tool

Description:

* Used to Easily Turn Tie Rods

* Used to Service Inner Tie Rods on Rack and Pinion Steering Assemblies

* Removes and Installs Inner Tie Rods on Many GM and Some Chrysler Products

* Can Also Be Used on All Inner Tie Rods with 1-3/16" and 1-5/16" Hex Sizes

CH1214252

Tie Rod End Socket

Description:

* Universal application.

* Fits most cars and some trucks.

* Designed for the quick and trouble-free removal and installation of the tie rod ends.

* After separating the ball joint from steering knuckle, slip tool over rod end and remove.

* Size: 。 U-opening: 34x 18.5mm

Length: 57.5mm

Inner dia.: 49mm

Drive: 1/2” square

CH091541 Airbag Release Tool-GM

Description:

* Tool design for fast release of the retention springs for removal of the steering wheel airbag module on GM models.

* Vehicles include BUICK, CADILLAC, CHEVROLET, PONTIAC, SOME TRUCKS AND MINIVANS.

CH121474-A

Track-Rod Adjusting Tool

Description:

* For loosening and adjusting stubbom Track-Rods.

* Application: Track-Rods Ø 9~23mm.

* Length: 38.5 cm

CH121474-B

CH200868

Description:

* For HGV's (trucks).

* For loosening and adjusting stubbom Track-Rods.

* Application: Track-Rods Ø 40~55mm.

* Length: 67 cm

Description:

* The special wrench for inner tie rod ends without disassembling rack and pinion.

* The strong body for high torque use.

* Size: 1/2”drive.

* Range:dia.27-42mm.

CH200872 Track Rod Setting Set

Description:

* Changing of the tie rod ends is possible without additional alignment.

* Reduces the workload when changing tie rods.

Content:

* Main unit with clamping device

* 10 and 12mm caliper, short and long type

* 17mm caliper for VW

* Fixing unit

* Caliper for depth measuring

CH091228-17

CH091228-24

Air Tie Rod Separator (11/16")

Description:

*Jaws width:17mm.

*The pneumatic tie rod separator handles tie rods with minimal shock to the assemblage.

*The tool may be used with any air hammer.

Air Tie Rod Separator (15/16")

Description:

*Jaws width:24mm.

*The pneumatic tie rod separator handles tie rods with minimal shock to the assemblage.

*The tool may be used with any air hammer.

CH1214343

Steering Rack Socket (for Lexus / Toyota)

Description:

* Assists in the removal and installation of the steering rack o-ring.

* Allows steering rack to remain in vehicle for repairs.

* Suitable for : Lexus RX330 / RX350 ( 2004 ~ 2009 )

Toyota Highlander ( 2004 ~ 2007 )

CH081293 VAG 4WD Drive Shaft Socket for AUDI

Description:

E-mail: chihtai@ms16.hinet.net

CH1214331

CH1308161

* Used for loosening and tightening the nut on the drive shaft.

* M6-speed manual gearbox 0A3, 4-wheel drive.

Application range:

*AUDI A4 (＞bj. 2001) , AUDI A6 (＞bj. 2005)

*OEM T40097

ATF Fill Plug Socket(For Mini)

Description:

* Saves time when checking / changing / adding transmission fluid.

* Makes it an easy removal and installation of the fill plug.

* There is very little clearance from the fill plug to the power steering unit in the car, a traditional socket / ratchet will not fit into the car.

* T55 x 17mm

* For Mini. R52,R53, R55, R56, R57, R58, R59, R60, R61 chassis with 6 speed automatic transmission.

Spacer Sleeves TOOL (Puller and Drive-in Mandrel)

Description:

* When replacing steering column switches, it is necessary to firstly remove the steering wheel and then to extract the spacer sleeve from the cone.

* The special design of the puller ensures that its collet chuck precisely encompasses the spacer sleeve which enables quick and smooth extraction of the spacer sleeve.

* Suitable for vehicle models as from 1988 onwards such as VW Golf (II and III), Jetta, Vento, Polo, Passat, etc.

Technical Data:

* Clamping range: 27 - 30 mm

* Drive-in Mandrel for Spacer Sleeves: The drive-in mandrel made of brass allows the spacer sleeve to be pushed into the steering column without risk of damage.

CH200893 Adjusting Running Gear

Description:

* Special design for the running gear for VW Touareg 2003.

CH0812151 Steering Wheel Fixed Tool

Description:

CH091550 Steering Wheel Level

Description:

* This steering wheel level is a sturdy and simple tool used to assure a level steering wheel during a front-end alignment procedure.

* The tool is easily attached to the steering wheel at the beginning of the alignment procedure.

* It is spring-loaded for automatic centering and self-retaining.

CH091550-B

Steering Wheel Level

Description:

* This steering wheel level is a sturdy and simple tool used to assure a level steering wheel during a front-end alignment procedure.

* The tool is easily attached to the steering wheel at the beginning of the alignment procedure.

* It is spring-loaded for automatic centering and self-retaining

* Suitable for inside diameter of steering wheel from 154mm to 355mm.

CH1308157

Locking Screw Set

Description:

* With conical tip for middle positioning of the steering while adjusting the steering geometry.

* Size: M8 x1.0, M10 x1.5, M12 x1.5, Suitable for Mercedes W107, W114, W115, W116, W123, W126.

* Move the steering rack until Pos. 1 and Pos. 2 are level. Then, screw in the locking screw. The rack is now in the center position so that it is possible to carry out the track basic adjustment of the right-hand and left-hand steering rod.

* Size M8 x1.25, Suitable for Audi A4, A6, VW Passat from 1997 onwards etc.

CH0812114

Heavy Duty Wrack Wrench

CH1308174

Twisted-Copper

E-mail: chihtai@ms16.hinet.net

Diameter From 25mm to 55mm (PAT.)

Description:

* Suits multiple rack ends and sizes(Hex drive, Round with two drive flats,Round with no drive flats).

* Use on vehicles with limited access to avoid need to remove rack assembly.

* New larger size provides coverage for domestic and import light TRUCK and SUV.

* Fixed position rings provide added strength.

* Patented cam design increases force as load is applied.

* Universal design suits rack end diameters from 25mm to 55mm.

* 1/2”Square drive.

* This high quality wrack wrench will help you ensure your car's performance.

Service All inner tie rod ends

Prevents damage to rack components.

Use for removal or installation

Round with flats

HEX Drive

Round With No Flats

Brush Cleaning Set

Description:

* Versatile through 5 different brush size.

- Size: Ø 6 mm, Ø 8 mm, Ø 10 mm, Ø 13 mm and Ø 16 mm (Each 4 pieces)

* The flexible bit holder is useable for hard to reach holes.

* For cleaning soiled or rusted bores and guides For example, the caliper sliding guide or the bore of the ABS sensor in the steering knuckle.

Content:

* 1pc Brush Holder with Collet

* 1pc Flexible Bit Holder ¼" * 4pcs Tube Brush Ø 6 mm * 4pcs Tube Brush Ø 8 mm * 4pcs Tube Brush Ø 10 mm * 4pcs Tube Brush Ø 13 mm

* 4pcs Tube Brush Ø 16 mm

E-mail: chihtai@ms16.hinet.net

Suspension System Tools

CH081276

Shock Absorber Piston Rod Tool Set

Description:

* Indispensable for locking the shock absorber piston rod whilst loosening or tightening the piston rod nut, e.g. on Macpherson struts.

* Application range : VW-AUDI, SEAT,FIAT,VAUXHALL/OPEL,PEUGEOT RENAULT, BMW,MERCEDES, JAPANESE PASSENGER CARS,VOLVO, NISSAN, MERCEDES W203

CH0312189

24Pcs Shock Absorber Tool Set

Description:

* This set includes 6 special extended sockets specifically designed for repairing and replacing shock absorbers.

Content:

* 6pcs long sockets (80mm): 16,17,18,19,21,22mm

* 6pcs extra long sockets (180mm): 16,17,18,19,21,22mm

* 2pcs 3/8”dr. adapter: 90&190mmL

* 6pc bits x 30mmL, Hex: H5,H6,H7,H8, Star: T50, Spline: M10

* 4pc nut drivers, Hex:H10, metric: 5mm,6mm,8mm

CH1308195

18Pcs Shock Absorber Tool Set

Description:

* For repair work at the spring strut, shock absorbers, removing strut unit

* For retaining the piston when installing and removing strut unit

* 1pc ratchet wheel, pawl, shift lever, 2 screws, ball and compression spring

* 6-point socket: 16, 17, 18, 19, 21, 22, 24mm

* T50 for Opel Astra H: 16, 17, 18, 19, 21, 22, 24mm

* 6-point socket: for repair work at the spring strut, especially for retaining the piston road when installing or removing strut units

* 7mm for Mercedes-Benz Vaneo

* 8mm for BMW

* 9mm for Opel Corsa B, Astra F, G, Vectra B

* 1/2-inch extensions: 6, 7, 8mm, 5 x 8mm, 6 x 8mm

* For Porsche Cayenne S, VW-Touareg: 7.1 x 9.6mm

CH1308195-2 Shock Absorber Tool Set

Description:

* Complete set of 47 pieces for performing the service of shock absorbers.

* This special set allows the mechanic to do the service safer and much faster

* 1pc ratchet

* 6-point socket: 14, 16, 17, 18, 19, 21, 22, 24 and 27mm

* 2-tap socket: 10.5, 12.5, 14.0, 14.5 and 22mm

* Slot-profile extensions socket: 4, 5.2, 6, 6.3, 7, 8, 9, 10 and 12mm

* D-profile extensions socket: 5 and 10mm

* 6-point extensions socket: 6, 7, 8, 9, 10 and 11mm

* 6-point bits extensions socket: 5, 6, 7 and 8mm

* Bits extensions socket: T50, T60 and XZN M12

* Slotted bits extensions socket: 3, 3.5 and 4mm

* 1/2” Dr. Strut leg pry socket: 5x7mm, 5.5x8.2mm

CH200869 Shock Absorber Installation Tool Set

Feature:

* This new and innovative tool is a genuine problem solver for the dismantling and assembly of shock absorbers with tension stop springs.

Function of the tension stop springs:

* The tension stop springs ensure that the shock absorber can’t be damaged, when stretching right up to the end stop.

* The spring is located directly within the shock absorber and is not active when in neutral gear and in the pressure stage.

* It only comes into effect at the end of the damper passage during the rebound stroke.

Removal procedure:

* Strut completely removed-dust boot or bump stop lifted-piston rod degreased

* Add clamping piece and secure in place

CH1308158 3/8” Shock Absorber Release Tool (Mercedes)

Description:

* For the assembly and disassembly of shock absorbers on V class vehicles.

* Extra long.

* With 21mm operation for opening the cap nut.

* 7mm internal square for securing the piston rod.

* External drive hexagonal socket 18.0mm

* Application range: Mercedes Type 639 (Viana and Vito)

CH0911145

BENZ W220 Shock Absorber Service Tool Set

Description:

* For Benz “220 589 00 61 00 06/03”

* This tool is for changing the top seal in air suspension.

* Fix suspension strut to a vise.

* Set 3 legs onto stub bolts in strut.

* Drive the contour forcing screw to compress the seal cup and replace the seal.

* Application: Benz W220

Description: * Used for fixing the front suspension when replacing the hub, ball joint or bush, to prevent the rebound from the spring.

Applicable

* VOLVO：S60(01~10), S80(99~06), V70(00~07) XC70(02~07) , XC60(09~), XC90(03~).

E-mail: chihtai@ms16.hinet.net

CH091556-A

Spring Compressor Kit

Description:

* For use with Macpherson struts in which spring pressure don’t exceed 8000N.

* The spindles are equipped with contra-rotating threads which eliminate the rise of slipping round the spring.

* Compression length: 65-320mm.

CH1308237

Spring Compressor-Wishbone Suspension

Description:

* Using on wishbone suspension and access points in the rear suspension arm.

* Features two pairs of carefully shaped yokes that prevent the coil spring from bowing.

* Due to the eccentric offset of the central hold, coil springs which have pronounced bow may be safely compressed, removed and replaced without the need to dismantle the rear axle.

Content:

* Capacity: 1800kg

* Size/Suitability: Ø.80- Ø.135mm

* Jaw Opening: 115-300mm

* Drive: 24mm Hex

* Socket: 1/2” Drive x 24mm(210mmL)

* Spanner: 32mm

Application:

* Mercedes W116, W123, W124, W126, W129, W140, W170, W171, W201, W202, W208, W210, W211 front and rear axis. Also for Mitsubishi, Nissan, Peugeot, Saab, Toyota, VW, Audi, Volvo, Ford, GM, Chrysler, FIAT, Renault, etc.

CH121455

Front Coil Spring Compressor Kit

Description:

* Suits: Mercedes Benz

* Models: W116, W123, W124, W126, W129, W140, W170, W201, W202, W210, GM, Opel, Peugeot, Rover, Saab, Volvo, VW T2, Ford Taurus, Hyundai, Mitsubishi Lada, Skoda, etc.

* Features extra strong Trapezoid thread on center screw.

* Supplied in blow mold storage case.

* Maximum Capacity: 5-1/2"(140mm) Spring diameter

* Overall Length: 13-3/8"(340mm)

CH120801-F Spring Compressor (Wishbone Suspension)

Description:

* Suitable for working on vehicles with wishbone diameter less than 30mm

* Smaller-sized spindle suitable for on-car working

* Includes a pair of C-shape devices for tighter connection between the main body and discs

* Can be operated with an air/impact wrench

* Includes a 100 Nm torque extension bar.

* Break point: 10,180 kgf (ca. 99,764 N)

* Max load: 4,072 kgf (ca. 39,900 N)

CH120837

Duty Macpherson Spring Compressor

Description:

* Set for heavy duty MacPherson shock absorber springs

* Suitable for air/impact wrench operation

* Provided with Nylon 6-6 jaw covers to protect coil spring paint

* Provided with a rectangle block that can be attached to main body for being fixed on a vise

* Break point: 6,820 kgf (ca. 66,836 N)

* Max. load: 2,728 kgf (ca. 26,000 N)

* Provided with Product Liability Insurance

CH120818-A

(Replaceable Jaws)

Description:

* Set for compressing MacPherson shock absorber coil springs

* Provided with three pairs of C jaws for fitting various sizes

* Set designed to be used with an air, impact or power wrench

* Break point: 4,275 kgf (ca. 41,900 N)

* Max. load: 1,710 kgf (ca. 16,760 N)

* Provided with Product Liability Insurance

CHIH

Heavy

Macpherson Damper Spring Extractor

Damper Spring Extractor

Set designed to be used with an air, impact or power wrench

Break point: 5,800 kgf (ca. 56,800 N)

Max. load: 2,318 kgf (ca. 22,700 N)

E-mail: chihtai@ms16.hinet.net

CH120818-15 Tensioning Accessory Jaw Set for BENZ

Description:

* Accessory Jaw set is use with CH120818 Series.

* Specially designed for Mercedes-Benz W204, X204 and W212 with fewer number of spring coils

* Includes an adapter housing and 3 adapters

* Not available for sale in the European Union

CH1214408

Volvo Strut Nut Socket Set

Description:

* Used for removing and installing the top shock retaining nut.

Content:

* 1pc strut nut socket, 27mm, OEM Ref: 9995469

* 1pc holding socket, 10mm, OEM Ref.:9995468

CH0911139

Mercedes Benz Strut Nut Socket

Description:

* Use for removing and installing the top shock retaining nut.

* Applications: BENZ W203.

CH200878 VW Strut Nut Socket

Description:

* Special design for VW strut nut.

* Material: S45C steel

E-mail: chihtai@ms16.hinet.net

CH200878-8P

8Pcs Strut Nut Socket Set

Description:

* Comprehensive set of strut nut tool to use on most vehicles.

Content:

* 1pc strut nut socket, I.D.10.5 x 22mm Hex drive, 3.5mm Pin

* 1pc strut nut socket, I.D.12.5 x 22mm Hex drive, 3.5mm Pin

* 1pc strut nut socket, I.D.14.5 x 22mm Hex drive, 5mm Pin

* 1pc strut nut socket, I.D.14 x 22mm Hex drive, 3mm Pin

* 1pc bit socket, 1/2”dr. 5mm x 60L

* 1pc bit socket, 1/2”dr. 5.5mm x 48L

* 1pc strut nut socket, I.D.15, O.D.22, 5mm Pin

* 1pc strut nut socket, I.D.15, O.D.15.5, 3mm Pin

CH1308260

3Pcs Drive Nut Set

Description:

* Drive nut for shock absorber damper rods.

Content:

* 1 pc nut B3.5 x 10.5mm used for VW Golf rear axle

* 1 pc nut B3.5 x 12.5mm used for VW Polo front axle

* 1 pc nut B5 x 14.5mm used for Polo, Golf, Passat, Audi 80

CH1308260-4

4Pcs Drive Nut Set

Description:

* Drive nut for shock absorber damper rods.

Content:

* 1 pc nut B3.5 x 10.5mm used for VW Golf rear axle

* 1 pc nut B3.5 x 12.5mm used for VW Polo front axle

* 1 pc nut B5 x 14.5mm used for Polo, Golf, Passat, Audi 80

* 1 pc nut B2.65 x 14.5mm used for Austin Maestro

CH1214237-A BMW Camber Adjuster

Description:

* Use this fixture to adjust the front camber on late model 3 series.

* Applicable: BMW E38, E39, E46, E53, E65, E66, E67, E85, E87.

CH1214237-B BMW Camber Adjusting Tool

Description:

* Use to adjust front camber.

* Applicable: BMW E60, E61, E63, E64.

CH121415-B Wishbone Lever Tool

Description:

* To push down the wishbone and other suspension parts, e.g. during the disassembly of the drive shaft, during replacing the gaiter or exchange of the wheel bearing.

* After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabilizer tension, in order to pull the joint from the support.

* Pretty often here problems arise: 。 the joint wedges again in the cone, after it was pressed down only briefly with a tire lever 。 the ball joint or gaiter get damaged 。 the mechanic injures himself or damages suspension parts when the tire lever slips away.

* With this lever tool the work can comfortably and surely be accomplished by one person.

E-mail: chihtai@ms16.hinet.net

CH200832 Wishbone Lever Tool

Description:

* This Lever is designed for removing wishbone heads and shock absorbers from pillar

* One operator can position lever effortlessly and proceed with disassembly

* It is enough to apply a force of 20 Nm

* Size: 970mmL

CH1214380

Rear Trailing Arm Bush Tool Set(FIAT-Panda)

Description:

* For Dismounting and mounting of the rear trailing arm bush.

* On car solution: no need to change the entire trailing arm necessary.

* Suitable for FIAT Panda 169 (2003~2012)

* OEM Ref.: 51856881, 51856882, 81932971, 81932972

Application:

CH1214334

* Remover: 2+3+4+5+6

* Installer: 1+2+5+6

Rear Axle Beam Bush Tool Set (Opel/Vauxhall)

Description:

* For dismounting and mounting of rear axle beam bush.

* On car solution- no need to remove the suspension arm.

* Suitable for Opel/Vauxhall Astra H(2004~2014), Meriva B (2010~), Zafira B(2005~2014).

Application:

* Opel/Vauxhall/GM: 5402637, 0402952, 402952, 13110418, 13267215.

CH200874 Rear Axle Bush Tool Set

Description:

* Special design for the user to be a straight.

* Save the time.

* For the removal and replacement of the bushes in the rear axle of the Renault Laguna.

* For alignment of the bushes(left/right) and assembly jig can be included in the set.

CH1214407

Suspension Bushing Tool(VAG Group)

Description:

* Designed to replace worn bushings on the control arm.

* Suitable for VW, Audi, Skoda, Seat.

* OEM Ref.:3346

CH0812213

Description:

* Removal Process

-Install the number 6.C-ring and use 3.Distance Studs to lock on the frame as to remove the bush.

* Installation Process

-Same as removal, attach the C-ring, hock the 3.Distance Studs, but adds 4-1.

-Depth Control Legs as to install the bush to a proper depth.

Applications: Ford Mondeo Mk IV 2007-Present, Ford S-Max, Galaxy 2006-Present Volvo S60, S80, XC60, V70, XC70 2006Present with Ford Platform

Honda Rear Trailing Arm Bush Installer/Remover

Description:

* For replacement of the Honda rear trailing arm bush.

* Hook design to mount the tool on trailing arm securely.

* No damage to ABS sensor cable, trailing arm, and parts close to bush during the maintenance.

* Applicable: Honda CR-V 1996/9~2002/8.K6.K8

CH0812205

FORD Mondeo MK4 TRAILING ARM BUSH- Installer-Tool

CH1308210

Honda/Acura Rear Trailing Arm Socket (10PT)

Description:

* Special 10-Point Socket

* Services Honda Civic, CR-V and Acura RSX

* Use with a 3/8-Inch Square Drive

* Heavy-Duty Construction Allow for Strength and Durability

* Material: CR-V

CH1308209

CH1308150

Camber Adjustment Tool for BMW Rear Axles

Description:

* Ideally suited for adjusting the camber on the rear axle

* The rear wishbones can moved with this therefore setting the camber

* Application range: BMW 3 series, (E36, E46)

Eccentric Socket

Description:

* For this purpose, the screws on the lower wishbone have to be loosened.

* Then, the eccentric socket is placed on the wishbone fastening screw. By turning the socket, the wishbone is adjusted to the correct camber setting.

* For adjusting the toe on BMW E36, E46, E83, E85 rear axle.

CH200843-6

6Pcs Alignment Tool Set

Description:

* The pair of pressure fixtures allows a single technician working alone to adjust and set camber angles.

* Not only quick and easy, but also eliminate the need for additional labor.

* This tool is placed between the strut or bodywork and the wheelrim and camber may be adjusted by rotating the hexagonal drive.

Application:

* CH200843-01, hex nut length: 75mmL,spin width:135~175mm, for VW Golf, Jetta, Seat, Toledo,etc.

* CH200843-02, hex nut length: 85mmL, spin width: 155~180mm, for VW Polo from 95’,Seat Cordoba etc.

* CH200843-03, hex nut length: 115mmL, spin width: 175~210mm, for Chrysler Voyager etc.

CHIH TAI Y&S CO., LTD.

CH200877 1/2”dr. Torsion Bar Socket

Description:

E-mail: chihtai@ms16.hinet.net

CH1214369-L

CH1214369-18

* To adjusting of torsion bars, installing of brake pressure regulators.

* Removing of wheel bearing on VW transporter T4.

Camber Adjusting Tool (VW/ Mercedes)

Description:

* For camber adjustment on VW Crafter, Mercedes Sprinter.

* For the extremely hard-to-access shock absorber screw connection.

* Size: 1/2”dr. x 21mm

Camber Adjusting Tool (VAG)

Description:

* Special 18mm offset wrench for adjustment of rear axle camber.

* OEM ref. T10179

Chassis Tools

CH121404 Bearing Fitting Tool Kit

Description:

* Made of shock-resistant poly acetate, this light model is designed to be taken along and used out in the field.

* Impact rings: 10 - 50 mm

* Impact sleeves: 18 - 32 - 52 mm

CH1308142

Bearing Distance Sleeve

Description:

* Adjustable distance sleeve with three pairs of top parts used in addition to the wheel bearing tools or use on the bench press.

* At the base plate of the distance sleeve the diameter can be adjusted according to the wheel bearing housing.

* The different top parts are selected depending on the shape of the wheel bearing housing and installed on the distance sleeve.

* Additionally the top parts can be shifted separately on the guide.

* Thus the distance sleeve is optimally adjustable to the wheel bearing housing shape. CH0812173 Rear

Description:

E-mail: chihtai@ms16.hinet.net

CH0812242 Rear Axle Nut Spanner (Benz)

Description:

* This tool is indispensable when replacing a wheel bearing or performing repairs on the rear axle.

* For loosening and tightening the wheel bearing lock nut on rear axle shafts or full floating axles.

Application range:

* Mercedes Sprinter (W901 - W905) rear axle (741.407 / 741.408 / 741.409), with grooved nut (902 357 01 26).

CH0812235

Two Jaws Bearing Remover

Description:

* Special design for removing the bearing in narrow space.

* Working depth : 93mm

*Jaws thickness: 1.5mm

* Applicable bearing dimension: Φ30~90mm

CH200823

Universal Adjustable Bearing Race and Seal Driver

Description:

* Universal adjustable bearing and seal press piece.

* Time saving because you never again have to search for a suitable driver

* Lightweight alloy material eliminates damage to racer housing

* Arresting and lockable

* Range: Ø 18-86mm

1pc beam 3-arm

9pcs pulling legs

1pc spindle CH121447-B13

Description: * 3-arm puller

With pulling legs for narrow spaces in different lengths.

Particularly well suited to be hung up on workshop walls.

All required clamping depths available at any time. CH121449

1 Pair Extensions, length 100mm.

1 Separator with pressure beam: Opening 12 - 75 mm. CH121425

Description:

For pulling and installing of belt pulleys at power steering pumps, generators, fan wheels, etc.

2 cross beams: 140 mm and 230 mm long.

2 pairs of straight pullers: length 60 mm and 110 mm.

1 pair of specifically formed pullers: length 60 mm.

All pullers and cross beams can be combined

CH121444 Light Engineering Puller Kit

Description:

* Enables removal of bearings where normal pullers are unable to be used by locking into the bearing race itself.

Contents:

* 1 x Puller yoke with centre screw and twin arms.

* 2 x Threaded leg extensions.

* 2 x 9mm ball ended threaded puller adapter.

* 2 x 11mm ball ended threaded puller adapter.

* 2 x 12.5mm ball ended threaded puller adapter.

CH121445 General Engineering Puller Kit

Description:

* 6 pairs of tips 16 - 19 - 22 - 25 - 28 - 32 mm, Spread Ø70 to Ø190 mm.

CH121443

Micro-Engineering Puller Kit

Description:

* Enables removal of bearings where normal pullers are unable to be used by locking into the bearing race itself.

Contents:

* 1 x Puller yoke with centre screw and twin arms.

* 2 x Threaded leg extensions.

* 1 x Centre screw thread cap.

* 2 x 5.5mm ball ended threaded puller adapter.

* 2 x 6.0mm ball ended threaded puller adapter.

* 2 x 8.0mm ball ended threaded puller adapter.

CH1214251-SET Mini-Universal Advanced Puller Set

Description:

* This product is suitable for solving tools wantonly and bendly of the following size

* Diameter：Ø 25mm~50mm

* Height：Max 40m&70mm

CHIH TAI Y&S CO., LTD.

CH121416-A0910

Wiper Arm Puller 2-arm

Description:

* With Special-Krallex-Legs

* With integrated Leg-Clamp

E-mail: chihtai@ms16.hinet.net

* Its special shape, the two different hook couples (with extra thin straight tips and rounded tips) and the adjusting nut make this puller almost universal in its range of application.

* Application on Audi, BMW, Chevrol/Daewoo, Chrysler-Jeep, Citroen, Fiat, Ford, Honda, Hyundai, KIA, Land Rover, Mazda, MG-Rover, Nissan, Peugeot, Porsche, VW, MAN, MB, Scania.

* Patent：Europe, U.S.A, Taiwan.

CH1214112-A

Universal Wiper Arm Puller

Description:

* Adjustable, compact and light easy to use: prevents damaging wiper arm.

* Cross-piece special for wiper featuring a nozzle.

CH121413-A Spreader Tool(German Utility Model)

Description:

* Suitable for VW-Audi, BMW, Citroën, Ford, Seat, Škoda, Renault, Peugeot, Japanese vehicles etc.

CHIH TAI Y&S CO., LTD.

CH121413-B

Spreader Tool (German Utility Model)

Description:

E-mail: chihtai@ms16.hinet.net

* Suitable for strut clamping bores on (for example): VW Golf V, Passat; Audi; BMW; Citroën; Ford; Seat; Škoda; Renault; Peugeot; Japanese vehicles etc.

* So that the spring/shock absorber unit can be pulled out of the bore in the steering knuckle even if it is a tight fit, it is essential to open out the clamping bore with spreader tool CH121413-B

* After this, the shock absorber unit can be removed or installed without difficulty, without risk of damaging the (cast iron or aluminum) steering knuckle.

* Due to the variably reloadable spreading head it is especially suitable for vehicles whose fastening slot is out of centre such as VW-Audi, Ford etc.

* Due to its dimensions and special form the replaceable wedge of the spreading head is particularly suitable for aluminum knuckles.

* The wedge is provided with an end stop to avoid excessive knuckle widening.

* Other wedges are available as accessories (e.g. for steel knuckles).

* Fully floating bolts avoid the tool canting during knuckle widening.

CH021124 Series 2 Arm Gear Puller

Specification:

No. Specificat ion Claw Open Claw Length Thickne ss Safe Loading 03 75mm 40-75mm 60mm 45mm 1.50t 04 100mm 50100mm 70mm 55mm 2.50t 06 150mm 70150mm 120mm 95mm 4.50t 08 200mm 95200mm 175mm 135mm 7.80t 12 300mm 140300mm 215mm 170mm 10.0t

CH021124-3

Series 3 Arm Gear Puller

Specification:

No. Specificat ion Claw Open Claw Length Thickne ss Safe Loading 03 75mm 40-75mm 60mm 45mm 2.50t 04 100mm 50100mm 70mm 55mm 4.80t 06 150mm 70150mm 120mm 95mm 7.50t 08 200mm 95200mm 175mm 135mm 11.0t 12 300mm 140300mm 215mm 170mm 14.0t

CHIH TAI Y&S CO., LTD.

CH1214246-A, -B,-C Outside Pullers

CH1214247-A

Inside Pullers

CH031270-M

E-mail: chihtai@ms16.hinet.net

Description: Item No. C min-max P(mm) T(kn) CH1214246-A 12-140 145 3 CH1214246-B 20-180 190 4 CH1214246-C 30-280 250 4

Description: Item No. C min-max P(mm) T(kn) CH1214247-A 60-135 140 3 CH1214247-B 60-170 190 4

Adjustable Blind Inner Bearing Slide Hammer Puller

Description:

* Used for removing many bearings and bushings.

* Feature a rust resistant finish.

* A handle for using with hammer

* Adjustable jaws width: 12.5 to 53mm.

CH021102 Bearing Puller

Description:

* Range: 12-38mm

CHIH TAI Y&S CO., LTD.

CH081297

Rear Axles Bush Remover/Installer

Description:

E-mail: chihtai@ms16.hinet.net

CH0812155

CH081289

CH121429-A

* Extractor / Instalador de silentblocks brazo desuspension delantera VAG

Application range:

* VW POLO,FOX, SEAT IBIZA,CORDOBA Y SKODA FABIA REF.

* OEM: T10030,T30035,3301 Y 473

BMW Rear Axles Bush Remover/Installer

Description:

* Removal and replacement tool for metallic bushes on rear axles BMW type E36,E46,E85.

* Replacement of the mounting bushes without removing the complete rear axle assembly .

Application range:

* BMW E36 , E46 , E85

Rear Axle Bushing Tools for VW, AUDI

Description:

* Special designed for replacing the rear axle mounting bushes, Whilst in suit on the vehicle and without the need for removing the rear axle assembly.

* It is fine thread and thrust bearing allows the bush to be fitted quickly and easily without causing damage.

Application range:

* AUDI A3 , VW GOLF IV ,BORA 1.4/1.6/1.8/2.0 and 1.9d(2001~2003)

Press and Pull Sleeve Kit

Description:

* Universal tool set for extracting and drawing in: Silent bearings, hydraulic bearings, bearing bushes, ball bearings, shaft seals, rubber bearings, etc.

* Fully universal application. Ideal for different vehicles. Cars + HGVs.

* Depending on requirements, the particular sleeves can also be individually reworked (e.g. recess, etc.)

* Application also with workshop press + press frame.

* 20 x press-on sleeves 。 inside: Ø 34, 36, 38 - 70, 72 mm 。 Outside: Ø 44, 46, 48 - 80, 82 mm

* 4 x step discs & 4 x pulling spindle + nuts 。 Sizes:M10.M12.M14.M16

E-mail: chihtai@ms16.hinet.net

CH200865 26Pcs Press and Pull Kit

Description:

* Universal tool set for extracting and drawing in:Silent bearings,hydraulic bearings,bearing bushes,ball bearings ,shaft seals,rubber bearings..tec.

* Fully universal application.

* Ideal for different vehicles Cars +HGVs. Content:

* 20pcs dimension disc from Ø44-82mm

* 4pcs Thread rod: M10,12,14,16

* 2pcs body

CH121429-AN06MUA Press and Pull Sleeve Kit

Description:

* Universal tool set for extracting and drawing in: Silent bearings, hydraulic bearings, bearing bushes, ball bearings, shaft seals, rubber bearings, etc.

* Fully universal application. Ideal for different vehicles. Cars +HGVs.

* Depending on requirements, the particular sleeves can also be individually reworked (e.g. recess, etc.)

* Application also with workshop press + press frame.

* 20 x press-on sleeves 。 inside: Ø 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72 mm 。 Outside: Ø 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82 mm

* Universal C-frame 245mm

CH0812231

CH091542

CH0915359

CH0915360

E-mail: chihtai@ms16.hinet.net

Benz & BMW Sub-frame Bush Remover/Installer(Hydraulic)

Description:

* Removing / installing safely and labor-saving by using hydraulic.

* Various parts for widely use.

* The cylinder capacity will reach 15T when the pump with 10000psi(700lbs) power.

Applicable:

* BENZ:W220 , W211 ,W203, BMW:E31 , E32, E34, E38, E39, E53, E60, E65, E66

Sub Frame Bush Remover (for FORD MONDEO)

Description:

* Specially designed tool for removing and installing the rear sub frame on FORD MONFEO.

4Pcs Subframe Locating Pin Set(M12x1.5)

Description:

* On some vehicles in the VW group

* The sub-frame needs to be removed to service the suspension bushes, when removing the clutch, changing the engine, servicing the wheels, steering, stabilizer bar or control arms.

* M12 can be fitted to VW SCIROCCO(09)‚EOS(06)‚GOLF(09)‚GOLF PLUS(05)‚JETTA(406)‚POLO(02)‚FOX(06)‚PASSAT(06)‚PASSAT CL(09)‚AUDI A3(04)‚TT(07) AND A4(01)-OEM T10096 (Sub-frame locating pins-VW and Audi group)

4Pcs Subframe Locating Pin Set(M14x1.5)

Description:

* These pins are screwed into the sub-frame and used to guide it back into place once the task is complete cares should taken to blot back diagonally and to the manufacturer’s recommended torque.

* M14 is primarily used for the new VW crafter OEM t10227, for VW T5, Touareg 2.5L, 5Cylinder TDi Engine.

CHIH TAI Y&S CO., LTD.

CH0911148-1 BENZ (W210) Lower Control Arm Bushings Remover/Installer

Description:

* Used for R& R of rear wheel bearing located in wheel carrier.

* This tool can also be to install the rear axle shaft flange.

* Applicable :Mercedes models W210 (NEWE-CLASS).

CH0911148-2

BENZ (W202 W107) Lower Control Arm Bushings Remover/Installer

Description:

* Used for R& R of rear wheel bearing located in wheel carrier.

* This tool can also be to install the rear axle shaft flange.

* Applicable :Mercedes models W202 W107(C-CLASS)

Description:

* For the removal and replacement of the large rear bush on the lower arms of Ford Transits from 2000 – 2013.

* Designed to be used with a 187000V2 press frame and ram.

* On vehicle solution with minimal strip down.

* Can also be used in a workshop press for lower arms when they have been removed from the vehicle.

* Application range: Ford Transit Mk5 & Mk6 from 2000 to 2013

* OEM Bush Numbers covered: 4042024, 4372132, 4540787 & 7372131 CH090988

CH081260 BMW Silent Block Tool Set

Application:

* CH081260-1, 4Pcs Tool Set, -5 Series: E39, E60, E61, E70 -6 Series: E63, E64

-7 Series: E38, E65, E66, E67 -8 Series: E52

* CH081260-2, 4Pcs Tool Set, -1 Series: E81, E87 -3 Series: E36, E46, E83, E90, E91, E92, E93 -5 Series: E60, E61 -6 Series: E63, E64

-7 Series: E38, E65, E66, E67 -8 Series: E31 -Z4: E85, E86

-MINI COOPER S: R53

* CH081260-3, 3Pcs Tool Set, -3 Series: E36, E46, E83 -5 Series: E39, E60, E61, E70 -6 Series: E63, E64

-7 Series: E38, E65, E66, E67 -8 Series: E31, E52 -Z4: E85, E86

* CH081260-4, 2Pcs Tool Set, -3 Series: E36, E46, E83 -8 Series: E31 -Z4: E85, E86

CH081285

17Pcs Silent Block Tool Set

Description:

* The tool set must only be used if it is in good working order.

* All safety equipment must always be within reach and should be checked regularly.

* The silent block tool set is developed for extracting and inserting.

Application:

* AUDI:

-A3,S3(years 2004-2012)

- TT,TTS Coupe/Roadster(years 2007-2012)

* SEAT

-Altea(years 2004-2012)

-Leon(years 2006-2012)

-Toledo(years 2005-2009)

* VW -Golf 5 Plus,Variant,4Motion(years 2005-2012)

- Jetta, Syncro(years 2006-2012)

- Scirocco (years 2009-2012)

-Beetle(years 2012)

-EOS(years 2006-2012)

CH081286

11Pcs Silent Block Tool Set

Description:

E-mail: chihtai@ms16.hinet.net

CH1308238

CH121490

CH200871

* Suitable for installation and removal of rubber-plastic bearings or Rubber-matal bearings at the rear axle.

Application range:

* AUDI A3 , VW GOLF 4 , BORA , NEW BEETLE

Pulling Device For Silentblocks

Description:

* The mechanical pulling device CH1308238 enables the quick removal and installation of all silentblocks on the rear sub-frame (Including differential mounting bushings) without removing the rear axle sub-frame from the vehicle.

Applications:

* Mercedes E-Class (W211) rear axle sub-frame.

Pulling Device for Silentbloc (Mechanical Drive)

Description:

* Universally suitable for silentblocs or pivoting bearings with Ø 40 - 71 mm

* The pulling device enables the quick, safe and professional removal and replacement of silentblocs and pivoting bearings.

* The mechanical drive included in the set enables the pulling out of silentblocs and pivoting bearings as from a inner bore-Ø of 10 mm.

* The possibility to easily complement the tool set with other parts, such as centring- and pressure rings or press-/support sleeves, makes this pulling device almost universally applicable, e.g. also for changing wheel bearings.

8Pcs Silent Block Puller for BMW

Description:

* Design for Silentblock for BMW

* BMW E38, E39

CHIH TAI Y&S CO., LTD.

CH200835 4Pcs Bearing Puller for VW Silentblock

E-mail: chihtai@ms16.hinet.net

Description:

* This tool is used to push new silentblock into arm for VW Polo and Skoda Fabia cars.

CH200842 Bearing Puller for Fiat Stilo Silentblock

Description:

* This tool is used to push new silentblock into arm for Fiat Stilo.

CH200866

Bearing Puller for Fiat Stilo Silentblock

Feature:

* The axle as previously detector is a simple but effective aid for detecting sources of disturbance in the area of vehicle axles.

Advantage:

* Operational test under load as when driving.

* The possible visual inspection and the scanning of components during the test increased the level of test security

* Considerable time saved in diagnosing the fault

* Clear and plausible test result for customers

* Avoid errors linked to exchange of parts

* Particularly economical test method

* Simple handling

* One-man operation

Applicable usage:

* Suspension top mount/bearing bushing/ carrier joint/track-rod end/ linking rod/ wheel bearing/axial joint/steering gear/stabiliser etc.

* Suitable for all trucks, vans, SUVs and vans up to 3.5t.

E-mail: chihtai@ms16.hinet.net

CH1214340 Rear Toe Adjustment Tool (for MINI)

Description:

* On 1st generation MINI Coopers (2002~2006), the rear toe angle is adjusted by moving the forward central arm bushing mount with the special tool 32 4 200.

* On 2002~2006 models, rear toe is adjusted by an eccentric bolt and plate that secures the lower transverse link to the trailing arm.

* Once the three mounting bolts are loosened, the central arm has slotted holes which allow for movement.

* OEM rf MINI 32 4 200

CH1214117-72 Wheel Hub Bearing Tool Set

Description:

* Thrust ring halves for dismounting x 2

* Thrust ring halves for assembling x 2

* Thrust washer for dismounting x 1

* Thrust plate for assembling x 1

* Thrust plate x 1

* Thrust pin x 5

* Mecanical spindle x 1

* Spindle nut x 1

* Screw x 2

* Application:

* Vehicles with a Ø72 mm wheel bearing: VW Polo, SKODA Fabia

CH0812152

Removal and Installed of the Compact Wheel Hub Tool Set

Description:

* Complete tool set for the removal and installation of the compact wheel hub / bearing unit for the VW T5 Transporter.

Contents

* Cross beam with threaded ring.

* Tension bar set, 2-pcs.

* Half shell mount, 2-pcs.

* Half shell set, 2-pcs. Removal.

* Half shell set, 2-pcs. Installation.

* Pressure piece removal.

* Pressure piece installation.

* Trapezium threaded spindle with 2 x thrust bearing + nut.

* Special spindle grease.

CH130818 Wheel Bearing Extractor

Description:

* For installing and removing wheel bearings as well as for installing wheel hubs.

* Change of built-in wheel bearings.

* Removing the strut unit as well as camber adjustment are not necessary. 。 time-saving (approx. 30 min). 。 money-saving repair for the customer

* Vehicles with Anti-Lock Braking System (ABS); 。 Due to the recess at the housing dismounting

* The ABS-sensor is not necessary. 。 No risk of damaging the ABS-sensor

Money and time-saving

Centering and due to calotte (spherical recess) at the housing.

Specification:

* O-ring-clamping (DBGM-German registered utility model) developed retains the thrust washer on the centering bushing when installing and removing the wheel hub.

* Higher axial forces in spite of lower application (due to highcapacity threaded spindle with special trapezoidal fine thread in conjunction with the axial cylinder roller bearing).

* Optimal centering when inserting the wheel hub into the new wheel bearing.

CH081282

21Pcs Tool Set for Compact Wheel Hub/Bearing Unit

Description:

* Professional fitting direct on the vehicle (removal with existing wheel hub extractor or universal sliding hammer)

* Minimum working effort - high time saving

* Simple and safe handling.

* Can also be optionally used with a workshop press

* Possible extensions for bearing unit Ø 62+66+72 mm due to the modular system

Application range:

* Audi A2 ,Audi A2 1.2L ,VW LUPO,VW Polo FOX, Seat Ibiza , Skoda Fabia

Content:

* Pressure bell universal

* Drive unit, 3 pieces

* Pressure , 3 pieces

* Half shell coupling black, for bearing Ø 72 mm, 2pieces

* Half shell coupling chrome, for bearing Ø 66 mm,2pieces

* Half shell coupling anodized, for bearing Ø 62 mm,2pieces

* Fixing screw M12 x 1.5, for half shell, set of 2 pieces

* Fixing screw M14 x 1.5, for half shell, set of 6 pieces

CH081252

Compact Wheel Hub Tool Set

Description:

* Tool set for compact wheel hub Bearing unit, Bearing unit Ø 72mm

* Professional fitting direct on the vehicle (removal with existing wheel hub extractor or universal sliding hammer).

* Minimum working effort - high time saving.

* Simple and safe handling.

* Can also be optionally used with a workshop press.

* Possible extensions for bearing unit Ø 62+66mm ,Due to the modular system

* Application range: Audi A2 ,Skoda Fabia , VW Polo ,FOX, Seat Ibiza

CH081296

Compact Wheel Hub Tool Set

Description:

* Tool set for compact wheel hub Bearing unit, Bearing unit Ø 78mm

Application range:

* FORD Focus (＞bj. 2004) , C-Max (＞bj. 2003) ,

* MAZDA 3 1.4i 1.6i 2.0i 1.6DI (＞bj. 2003) ,

* VOLVO C30 (＞bj. 2006) , VOLVO C70 (＞bj. 2006) ,

* VOLVO S40/V50 (＞bj. 2004) ,

CH0812101-15

15Pcs VAG Wheel Bearing Tool Set

Description:

* For the new VAG models with wheel housings/hub unit.

* Required for the correct installation.

* High time saving - faster execution at workshop press than at the vehicle ideally suited for Wheel bearing diameters 62 mm / 66 mm / 72 mm (13” 14” 15” -undercarriages).

* The extension of the wheel housing takes place by means of the available workshop facility.

Content:

* Half shell coupling anodized, for bearing Ø 62 mm

* Half shell coupling chrome, for bearing Ø 66 mm

* Half shell coupling black, for bearing Ø 72 mm

* Pressure bell universal

* Thrust bearing Gr. 66 / 72 mm, Length 160 mm

* Thrust bearing gr. 62 mm, length 160 mm

* Fixing screw M12 x 1.5, for half shell, set of 3 pieces

* Fixing screw M14 x 1.5, for half shell, set of 3 pieces

CHIH TAI Y&S CO., LTD.

CH0812154

Universal Car Wheel Bearing Tool Set

Description:

E-mail: chihtai@ms16.hinet.net

* For the dismantling and assembly of wheel housings and hub directly on the vehicle

* Extension of the suspension strut and axle joint is no longer required

* Correct and protective installation of the housings through the correct pressure point at the bearing outer ring

* Suited for axle tube and for axle with the housing adjoining at an alliance

* High time savings as reactive axle alignment is not necessarily required

* 300 mm gear pulling spindle

* Through enclosed bolts (M12 + M14) wheel hubs can be removed

* Pressure bearing protects against increased friction during the process

* Special steel

* In durable plastic storage case

Application range:

* VW, Audi, Opel, Mercedes Benz, Peugeot, Citroen, Renault, Ford, Honda, Mazda, Mitsubishi, Nissan, Toyota, Austin-Maestro, BMW

CH200836-14

14Pcs

Audi Rear Wheel Bearing Pulling Tool

Description:

* Complete repair solution for removing & installing press-in style rear wheel bearings.

* This Kit includes a common wheel bearing jack screw, press head, and receiver cup.

* Unlike standard one-size fits all press tools, our dedicated kit also includes a large “U” shaped press plate so you can remove drive hubs safely and easily.

* Made from heavy steel, this sturdy set comes in its own blow molded case for portability and easy storage.

CH200875

Rear Wheel Bearing Installer and Remover Set

Description:

* For removing/installing the rear wheel bearing and rear axle flange on Mercedes Benz types W124,129,201,202

CHIH TAI Y&S CO., LTD.

CH210521 FWD Hub Bearing Service Kit

E-mail: chihtai@ms16.hinet.net

Description:

* Universal kit to service most front wheel drive bearings.

* Removes and installs wheel bearings.

* Installs front hub.

CH210521-A FWD Hub Bearing Service Kit

Description:

* Universal kit to service most front wheel drive bearings.

* Removes and installs wheel bearings.

* Installs front hub.

CH210580

Universal Hub Separator

Description:

* Complete versatile adapters included to handle hub removing from most popular front wheel drive vehicles.

* Acme threaded forcing & adjusting screws make rugged jobs easy & efficient.

Applications:

*GM,Ford,Honda,Mazda,Toyota,Nissan,Mitsubishi,Daihatsu,Suba ru,Suzuki,Saab,VW,Fiat,Renault & Hyundai.

CHIH TAI Y&S CO., LTD.

CH1308291

Wheel Hub Puller Set

Description:

E-mail: chihtai@ms16.hinet.net

* Puller plate size: A: 90-130mm, B: 100-180mm

* Puller bolts: M12 x1.25, M12 x1.5, M12 x1.75, M14 x1.5, M16 x1.5

* Hex nut: M14 x1.5

* Adaptor: 2-1/4” x14UNS on M18 x1.5

* Slide Hammer: 4.8kg

* Spindle: M18 x1.5 x230mm

* Suitable for Alfa Romeo, Audi, BMW, Citroen, Fiat, Ford, Opel, Mercedes-Benz, Skoda, Seat, Volkswagen, Mazda, Porsche, Renault, etc.

CH1214171

Original HUB MASTER

Description:

* This exclusive kit is the only one of its kind

Featuring:

* A self centering mechanism under load.

* Easy R&R of Rear Wheel Drive European vehicles.

* Wide application range of Front Wheel Drive vehicles.

* Available as vehicle specific Sub-Kits(non Master Kit).

* Complete easy to follow instructions.

Applicable:

* Rear Wheel Drive: Mercedes, Porsche, BMW.

*Front Wheel Drive: VW, Audi, Asian, some Domestic.

CH1308232

Front Bearing Removal Tool

Description:

* Front wheel bearing and disc removal tool for the Ford Transit & Transit Custom 2012-2016

E-mail: chihtai@ms16.hinet.net

CH1308242 Inner Bearing Ring Extraction Tool Set

Description:

* Allows precise extraction of inner bearing race from the wheel hub.

* Removal of the hub almost always leaves the inner race on the hub. The race is impossible to remove without the correct special tool.

* Makeshift methods such as grinders, Chisels. Welding torches, etc. represent severe risks of personal injury or damage to the components.

* The new puller set allow quick and easy removal of inner bearing races with diameters from 45mm to 55mm with a few minutes without risk of damage or injury.

Application:

* VW, Audi, Ford, Skoda etc.

CH1308242-2

Inner Bearing Ring Extraction Tool Set

Description:

* Allows precise extraction of inner bearing race from the wheel hub.

* Removal of the hub almost always leaves the inner race on the hub. The race is impossible to remove without the correct special tool.

* Makeshift methods such as grinders, Chisels. Welding torches, etc. represent severe risks of personal injury or damage to the components.

* The new puller set allow quick and easy removal of inner bearing races with diameters from 45mm to 60mm with a few minutes without risk of damage or injury.

Application:

* Ford, VW, Audi, Seat, Skoda, Mercedes W168 etc.

CH1308242-3A

Inner Bearing Ring Extraction Tool Set

Description:

* Allows precise extraction of inner bearing race from the wheel hub.

* Removal of the hub almost always leaves the inner race on the hub. The race is impossible to remove without the correct special tool.

* Makeshift methods such as grinders, Chisels. Welding torches, etc. represent severe risks of personal injury or damage to the components.

* The new puller set allow quick and easy removal of inner bearing races with diameters from 55mm to 68mm with a few minutes without risk of damage or injury.

Application:

* Mercedes, BMW, Peugeot etc.

CH1308242-3B

Inner Bearing Ring Extraction Tool Set

Description:

CH1308242-4

chihtai@ms16.hinet.net

* Allows precise extraction of inner bearing race from the wheel hub.

* Removal of the hub almost always leaves the inner race on the hub. The race is impossible to remove without the correct special tool.

* Makeshift methods such as grinders, Chisels. Welding torches, etc. represent severe risks of personal injury or damage to the components.

* The new puller set allow quick and easy removal of inner bearing races with diameters from 40mm to 60mm with a few minutes without risk of damage or injury.

Application:

* Audi, BMW, Ford, Mercedes-benz, Peugeot, Renault, Toyota, VW etc.

Inner Bearing Ring Extraction Tool Set

Description:

* Allows precise extraction of inner bearing race from the wheel hub.

* Removal of the hub almost always leaves the inner race on the hub. The race is impossible to remove without the correct special tool.

* Makeshift methods such as grinders, Chisels. Welding torches, etc. represent severe risks of personal injury or damage to the components.

* The new puller set allow quick and easy removal of inner bearing races with diameters from 40mm to 72mm with a few minutes without risk of damage or injury.

Benz, Opel, Renault, Peugeot CH200857

Adaptor: * M16x1.5, For SUBARU * M20x1.5, For VW-Beetle,Touareg,Porsche Cayenne * M22x1.5, For BMW E30,E46 * M24x1.5, For BMW E36,Mercedes W203 * M27x1.5, For BMW E32,E34,E38,E39,X5 * M30x1.5, For BMW E32,E34,E36

CH0915110 Hub Pullers-Mechanical

Description:

* Free moving legs mounted on a floating plunger, enabling quick and easy attachment to vehicle hubs.

* Heavy duty hammer type handle allows the application of shock force for rapid removal of sticking hubs.

* Fine pitch force screw for smooth application of pulling power.

* Plunger, leg and handle drop forged from high quality steel, heat treated for strength and durability.

* This set includes 3 jaws.

CH0915110-A Hub Pullers-Mechanical

Description:

* Free moving legs mounted on a floating plunger, enabling quick and easy attachment to vehicle hubs.

* Heavy duty hammer type handle allows the application of shock force for rapid removal of sticking hubs.

* Fine pitch force screw for smooth application of pulling power.

* Plunger, leg and handle drop forged from high quality steel, heat treated for strength and durability.

* This set includes 5 jaws.

CH121484 Universal Puller Set For Wheel bearing Cage

Description:

* 3 Arm design for better Gripping under the smallest work column, and evenly of consistent force apply to gripping the bearing ring.

* To turn the spindle to engaged bearing shell and remove it safely.

* Delivery: puller arms and spindle clamp chain wrench SW6

*Technical data: Spindle Length: 200 mm Spindle M20 * 1.5

* pressure mushroom Ø :34mm anfgesteckt secured with o-ring Arm width: 27mm Off length: 98mm Weight: 2642g Use range : Ø50～Ø120

CHIH TAI Y&S CO., LTD.

CH030521

Replaceable Plate Front Hub Puller PAT.P

Description:

E-mail: chihtai@ms16.hinet.net

* Universal application for removing front hubs on front wheel drive cars.

* Available Range: P.C.D 94-145mm(3,4,5,6, bolt)

* Material: carbon steel

Operation:

CH0812185

Hydraulic Wheel Hub Press Puller

Description:

* Used to press the axle shaft from the hub.

* For 4 or 5 bolt hubs with the centerline of the bolts mounted in a 96 - 138 mm diameter circle.

* Hydraulic Ram with 10 ton capacity.

* Suitable for: VW, Audi, Seat, Skoda, Opel, Volvo, Fiat, Renault, Peugeot, Citroen and more.

CH0812185-A Wheel Hub Press Puller

Description:

* Used to press the axle shaft from the hub.

* For 4 or 5 bolt hubs with the centerline of the bolts mounted in a 96 - 138 mm diameter circle.

* Suitable for: VW, Audi, Seat, Skoda, Opel, Volvo, Fiat, Renault, Peugeot, Citroen and more.

E-mail: chihtai@ms16.hinet.net

CH0312199-Q 6 Holes Hub Separator

Description:

* Use for removing the 6 holes HUB rear axle.

* Provides the mechanical advantage.

* Services: Toyota Hiace 100 series, 200 series Nissan Caravan E25 series, E26 series.

* P.C.D.: 139.7mm

* Thread specification: M12 x 1.5

CH0312199-Q2 6 Holes Hub Separator

Description:

* Use for removing the 6 holes HUB rear axle.

* Provides the mechanical advantage.

* Services: Disc brakes,Toyota Hiace 100 series, 200 series Nissan Caravan E25 series, E26 series.

* P.C.D.: 139.7mm

CH1214119-D Wheel Hub Grinder

Description:

* For cleaning the wheel centering device as well as the attachment area between the wheel and hub.

* Corrosion between the rim and the wheel hub is removed and torque values can no longer be distorted.

E-mail: chihtai@ms16.hinet.net

CH121488 Pliers for Locking Ring Without Eyelet

Description:

* Suitable e.g. for Citroen wheel bearing locking rings.

* Thanks to the special design of the pliers tips and to the fixing through an elastic counter-bearing wheel bearing locking rings without eyelet are easily removed and replaced.

* This special pliers provides professional removal and replacement of wheel bearing locking ring which would be otherwise almost impossible.

CH0312198

Spindle Snap Ring Plier (Ford Super Duty)

Description:

* Ratcheting lock mechanism holds the snap ring open for plain extract and installation.

* Used to substitute the spindle snap rings found on 2007 and newer Ford super duty pickups.

* Install into the 2-1/2” within diameter of the hub.

* Rigid plier devise.

* Slender tips.

CH200876-6

6Pcs Rear Hub Socket Set

Content:

* Drive: 1/2”dr. x H24

* Size: -3pcs 43mmL, M14, M16, M18 -3pcs 78mmL, M14, M16,M18

* M14 for 500 series since 12/1995, 900 since 06/1996, rear hubs L/T Transporter

* M16 rear hub on Sharan

* M18 rear hubs on Golf

CH200876-8

8Pcs Rear Hub Socket Set

Content:

* Drive: 1/2”dr. x H24

* Size: -3pcs 43mmL, M14, M16, M18 -3pcs 78mmL, M14, M16,M18

-1pc 3/4”dr. impact socket 24mm -1pc 4mm hex key

* M14 for 500 series since 12/1995, 900 since 06/1996, rear hubs L/T Transporter

* M16 rear hub on Sharan

* M18 rear hubs on Golf

E-mail: chihtai@ms16.hinet.net

CH1214354 Wheel Hub Holding Tool

Description:

* Used to hold the wheel hub in place while the axle nut is removed / installed or wheel bearing service.

* 1/2” square drive for breaker / extension bar.

* Works on vehicles with wheel stud bolt patterns ranging from 4 x 100mm (3.937”) to 8 x 170.3mm (6.704”).

* Can also be used to hold rear differential yoke on solid axle vehicles during pinion seal or bearing service, as well as many other types of machines with driver shafts, yokes and universal joints.

CH0915421 Dodge Hub Nut Socket

Description:

* To minimize the tools necessary to Chrysler Group vehicles, this usage information is subject to change as vehicles an components are released or updated.

* Application: -2006 (DR) - System (3 - Differential and Driveline) -2007 (DR) - System (3 - Differential and Driveline) -2008 (DR) - System (3 - Differentia! and Driveline) -2009 (DH) - System (3 - Differential and Driveline) -2010 (DC, DS) - System (3 - Differential and Driveline) -2011 (DS) - System (3 - Differential and Driveline) -2012 (DS) - System (3 - Differential and Driveline) -2013 (D2, DD DJ ) - System (3 - Differential and Driveline) -2014 (D2, DD, DJ, DP) - System, (3 - Differential and Driveline) -2015 (D2, DD, DJ, DP) - System (3 - Differential and Driveline) -2016 (D2, DD, DJ) - System (3 - Differential and Driveline) -2017 (D2, DD, DJ) - System (3 - Differential and Driveline) -2018 (D2, DD, DJ) - System (3 - Differential and Driveline)

CH121437-A12

Iveco Wheel Hub Nut Socket

Description:

* Suitable for IVECO Daily 35C/35S(2014~) front wheel hub castle nut.

* OEM Ref.:99355185

CHIH TAI Y&S CO., LTD.

CH2008104 Drive Flange Locking Kit

Description:

E-mail: chihtai@ms16.hinet.net

* Drive flange Hub locking device.

* Used to lock car drive flanges and drive shafts allowing the removal of Driveshaft and hub Fixings.

* One man operation - no need for an assistant to hold the flange.

* Easy to use and reposition for multiple bolt removal (Inner drive shaft Bolts).

* Durable plastic wheels prevent damage to brake components or Hub.

CH2008111

Wheel Bearing Circlip Removal & Assembly Lever

Description:

* Specially designed lever that allows the easy removal and fitting of wheel bearing internal circlips.

Applications:

* Vauxhall, Opel, Ford, PSA & Fiat group vehicles.

* Also suitable for Ford DCT clutch pack internal clip.

CH0812359

Inner-Driveshaft Extractor Fork Tool

Description

* The driveshafts on many front wheel drives are held in the gearbox by a spring clip locking ring.

* Remove the driveshaft from the vehicle, the inner driveshaft requires levering out.

* Unless the correct tool is used that can provide the required leverage in exactly the right place, the gearbox casing, as well as the driveshaft joint, are at risk of being damaged.

Applications include:

* Ford, Mazda, Volvo, Renault, Dacia and other front wheel drive vehicles.

CHIH TAI Y&S CO., LTD.

E-mail: chihtai@ms16.hinet.net

CH1214236-G BENZ (W220/W211/W230) Ball-Joint Installer/ Remover (Tools, Repair Tools, Auto Tools)

Description:

* On car maintenance.

* Special design to remove & install the ball joint without removing any parts.

* Applicable: Benz W220/W211/W230

Description:

* Complimentary tool for use .

* Ideal for restricted access areas.

* Can also be used hydraulic spindle.

* Impact wrench safe. Allows greater application of force.

*Universal C-frame 245mm

CH121451 Ball Joint Service Tool & Master Adapter Set

Description:

* This set was created specifically to expand the capability of your No.#2030 ball joint service set.

* It includes all the receiver tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2- and- 4 -wheel-drive pickups, vans, and sport utility vehicles, through 1997.

* Also includes the No. #2030-1 live center forcing screw plug.

* Packaged in convenient carrying/storage case.

CH1308115

Hydraulic Press Tool Kit

Description:

* The ball joint can easily and quickly be pressed into and out of the lower wishbone.

* To remove/install the ball joint directly on the vehicle without to dismantle the wishbone.

Applications:

* Mercedes W163(M-Class) front axle/ rear axle and W211 (EClass), W220(S-Class), W124, W201 front axle.

CH121429-C-MU Universal C-Frame

Description:

* Permits easy torqueing with 1" socket for correct upper ball-joint preload. CH0812142

CH031293-A Lower Arm Ball Joint Separator

Description:

* Forged steel body and lever provide an excellent performance and long usage.

* This press segregates the lower control arm ball joint from the steering knuckle.

* Jaw open: 60mm

Application:

* Works on many Ford, Lincoln.

* Works on Mercury Milan model years 2006,2007,2008,2009,2010,2011.

* Works on Mercury Montego model years 2005,2006,2007.

CH0312194-J

Adjustable Ball Joint Separator

Description:

* Used for removing many ball joint and tie rod ends.

* Feature a rust resistant finish

* A handle for using with hammer

* Adjustable jaws width: 18 to 43mm

CH081294-A 1/2”Dr. Pin Wrench Socket for BENZ M-Class(W163/W164)

Description:

* Used for Secure the retaining ring during R&R of ball joints. * Application range: MERCEDS-BENZ :M-CLASS (W163/W164) lower ball joint of front & rear axles.

CH081294-B 3/4”Dr. Pin Wrench Socket for BENZ M-Class(W163/W164)

Description:

* Used for Secure the retaining ring during R&R of ball joints.

Specification:

* Drive:3/4”dr * Inner dia.: 52mm * Outer dia.:63mm

* High: 60mm

Application range: MERCEDS-BENZ :M-CLASS (W163/W164) lower ball joint of front & rear axles.

E-mail: chihtai@ms16.hinet.net

CH081294-C 3/4”Dr. Groove Nut Socket with 6 Studs for MERCEDS-BENZ Sprinter

Description:

* High accuracy of fit.

* Extremely robust execution.

* Suitable for high tightening and loosening torque

Specification:

* Drive:3/4”dr

* Inner dia.: 50mm

* Outer dia.:70mm

* High: 52mm

Application range:

* MERCEDS-BENZ SPRINTER HA, etc.

CH1214418

Ball Joint Socket-44mm

Description:

* For loosening and tightening of screw-in type front lower ball joints.

* Excessive loading of the front suspension could result in loosening and eventual separation of the front wishbone lower ball joints.

* Especially useful for the recent recall repair(Peugeot recall code: JHK)

Application:

* Peugeot:Expert traveller, Citroen:Dispatch, Jumpy, Space Tourer, Toyota: ProAce, ProAce Verso, year:2014~2018

* OEM Ref.: PSA 9818657580, Toyota: SU001-A6525

CH110504

Suspension Split Hub Knuckle Spreader

Feature:

* Double ended action allows use on both larger upper split hubs & lower ball joint split joints.

* Applications include: Audi, BMW, Citroën, Ford, Peugeot, Volkswagen.

* Use with 10mm hand tools only.

* Keep thread clean & lightly lubricated.

CH1308344-A

Lower Control Arm Prying Tool

Description:

* The tool lower control arm prying tool is great for working on ball joints wheel bearings and anything that requires the disconnection of the lower ball joint.

CHIH TAI Y&S CO., LTD.

CH200844-A Air Powered CV Boot Installation Tool

Feature:

CH121473-A

E-mail: chihtai@ms16.hinet.net

* Innovative tool saves time, money and frustration.

* Installs flexible steering and CVJ boots without removing axle from the vehicle or the CV joint from the axle.

* Save on labor time by up to 70% and prevent damage to CV joint.

* Composite body with simple control valve works from standard workshop air supply.

* Suitable for cars, small vans, light commercial vehicles

* Capacity:Ø20-110mm

* Material: aluminum steel

* Air supply:Max 9Bar(125psi)

CH121473-B

CV Joint Assembly Removal Tool(Phosphate Coated)

Description:

* Fits CV joint on virtually all passenger cars.

CV Joint Puller

Description:

* Design for removing the CV joints on front wheel drive cars. * No need to remove the entire drive axle from the vehicle. * No need to use a hammer. Avoid to damage the drive axle.

Application: 1. Lose the nut of the drive shaft.

Put the CV joint puller over the drive shaft. 3. Fix the CV joint puller with the traverse. 4. Mount the nut of the drive shaft and actuate it with a suitable tool, till you separate the joint from the drive shaft.

CHIH TAI Y&S CO., LTD.

CH121478-D

CV Boot Clamp Pliers (two way jaws)

Description:

E-mail: chihtai@ms16.hinet.net

* Design for fitting the high strength stainless steel clamps on modern vehicles where a torque setting is specified. (23~30Nm typically)

* This two way jaws are designed to work in hard to reach areas.

* Suitable for VAG, Opel, Vauxhall, Ford, etc.

CH121478

CV Boot Band Pliers

Description:

* For assembly of new stainless steel Clamp-Bands on drive-shafts where a torque setting is required.

* The 3/8" Torque Wrench is ideal to provide the drive.

* Application: VW-Audi, Ford, Opel/Vauxhall etc.

* Material: Steel & PP

CH0312194-H

Axle Popper Kit

Description:

* Safer than using a pry bar

* Forked end applies even pressure to both sides of the shaft for releasing the shaft

* Strike the wedge or use it as a pry bar to release the half shaft with tapered ends

* Shim included to fill the gap between the half shaft and transaxle

CH0312194-K

Axle Popper Kit

Description:

* Safer than using a pry bar

* Applies even pressure to both sides of the shaft for releasing the shaft

* Tapered on both ends of the wedge along with a 12mm and 14mm shaft to fit into the air hammer.

* Can be used with CH0312194-H

CHIH TAI Y&S CO., LTD.

CH121401

CV Boot Clamp Pliers (Ear-type)

Description:

E-mail: chihtai@ms16.hinet.net

* Designed to crimp the ear-type CV boot clamps used on frontwheel drive vehicles.

* May also be used to crimp the type of clamps used on fuel and cooling system hoses.

CH121439

Nuts With Top Holes Wrenches

Description:

* Interchangeable pins.

* Forged in chrome vanadium steel, with divider-type adjustment controlled from central knurl. Each wrench supplied with a set of 8 pins.

* Set of 2 spare pins. Size: Ø2.5 ~ 4mm, Ø 3 ~ 5mm, Ø 6 ~ 8mm, Ø 7 ~ 9mm.

* Double-ended round pins for nuts with top holes.

CH091552

2Pcs Rubber Ring Hook Tool Set

Description:

* Special designed to pull the rubber ring which connected with exhaust tube.

* 2 special angle hook attached.

CH1308149

Toothed Socket For Distance Sensor

Description:

* For removal and replacement of the distance sensors which are built in to the front and rear bumpers.

* The tool not only allows removal and replacement, but also mounting the distance sensor with the correct tightening torque.

* Suitable for Mercedes S-Class

E-mail: chihtai@ms16.hinet.net

CH200840 Adjustable Engine Support

Description:

* Design to support engine or gearbox when the engine bracket has been removed.

* Removes the need for using cranes, transmission jack etc.

* For Ford, Audi, VW, Golf, Peugeot…etc.

CH200827 8Pcs Adjustable Hook Wrench Set

Feature:

* Hook type and pin type to be one wrench

* Ideal for adjusting collars, lock nut rings, and bearings.

* Specifically engineered to hold up under the most rigorous industrial use.

Content: Span Dia.(mm) Hook Depth (mm) Hook Thickness (mm) Overall Length(mm) 36-60 2.8 5 175 60-90 3 10 200 30-120 4 12 290

* Pin size: dia.7.9 x 8L, dia.6 x 3.8L, dia.6 x 7.9L, dia.5 x 4L, dia.4 x 4L

CH1308163

28Pcs Oil Drain Plug Key Set

Description:

* Suitable for sump plugs,engines, gear box and back axle. Chrome Vanadium keys with satin finish.

Content:

* Hex key: 8mm, 9mm, 10mm, 12mm, 13mm, 14mm and 17mm

* Square(Female): 10mm

* Square: 7mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm, 5/16" and 3/8"

* Star(Torx): T45

* M16 Plug Socket

* Triangular -10mm

* Sockets (Magnet): 13mm, 14mm, 17mm, 18mm, 19mm and 21mm

* 3/8" Dr. T-Handle

* 3/8" Dr. Extension bar

E-mail: chihtai@ms16.hinet.net

CH0812357 Exhaust Removal Pliers

Description:

* This tool separates the rubber supports from exhaust hanger brackets.

* Works on all import and domestic car and truck exhaust systems that use the rubber hanger supports.

* The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier.

CH0312202

Clamping Washer Tool- VAG/Ford

Description:

* For quick and safe removal/fitting of clamping washers which are used on underbody heat shields ...etc

* Applications for : Audi, Seat, Ford, Volkswagen,Skoda.

* The clamping washers are also found on many other vehicle marques

* 1/4"DR with quick chuck end for use with 1/4"DR wrenches, drivers or cordless drills

* Can compatible with connect Clamping Discs for VAG.

CH0915243 20Pcs BMW Wheel Bolt Lock Set

Description:

* Applicable for installing and removing locks of BMW F series

* Contents: #41‚#42‚#43‚#44‚#45‚#46‚#47‚#48‚#49‚#50‚#51‚ #52‚#53‚#54‚#55‚#56‚#57‚#58‚#59‚#60

* This tool enables you to remit servicing of customer vehicles, even customer lost the car key.

CH0915410

CH200853-23

Description:

*Applicate for installing and removing wheel screw locks on most VAG and SEAT vehicles.

* Content: #541,#542,#543,#544,#545,#546, #547, #548, #549, #550,#551,#552,#553,#554,#555,#556,#557,#558,#559,#560

* This tool enable users to permit servicing of customer vehicles, even customers lost the car key.

* VM Number: T20213.

Description:

* Special shape for ANTI-THELF wheel nut.

* Drive size: 1/2”Dr.

* Application:BMW E12,E21,E23,E24,E28,E30,E31,E32,E34,E36,E38,E39,E46/16,E4 6/2,E46/3,E46/5,E46/C,E52,E53,E60,E61,E63,E64,E65,E66,E67, E83,E85,E87,R50,R52,R53

23Pcs VAG Wheel Nut Socket Set

Description:

* A set of Wheel Nut Locking keys for VAG models

Content:

* 22pcs essential wheel nut lock keys: 6pt, 7pt, 8pt, 9pt, 10pt, 11pt, 12pt, 13pt, 14pt, 15pt, 16pt, 17pt, 0/10pt, 1/11pt, 2/13pt. 3/14pt. 4/15pt. 5/16pt. 6/17pt. 7/19pt, 8/20pt,9/21pt

* 1pc 17mm wheel nut drive socket.

*Manufactured from SCM440 steel and Black plated

Applications:

* Pre 2010 “non “cloverleaf” style locking wheel nuts to fit Polo, Beetle, Golf, Jetta, Scirocco, Passat, Sharan, Touran, Tiguan

* Only supplied to genuine motor traders /garages

CHIH TAI Y&S CO., LTD.

E-mail: chihtai@ms16.hinet.net

CH200853-21 21Pcs BMW pre-F type Wheel Nut Socket Set

Description:

* A set of Wheel Nut Locking keys for BMW the pre F type models

* 20 essential wheel nuts lock keys equivalent to BMW OEM 36 1 300.

Content:

* 1pc 17mm wheel nut drive socket x 1/2"Dr. -Manufactured from SCM440 steel and Black plated

* Tamperproof: 13pt, 15pt, 16pt, 17pt, 18pt, 19pt, 20pt, 21pt, 22pt, 23pt and Non tamperproof 7pt, 8pt, 9pt, 10pt 11pt, 12pt, 13pt, 14pt, 15pt, 16pt

Application:

* BMW and Mini series: BMW: E12, E21, E23, E24, E28, E30, E31, E32, E34, E36, E38, E39, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E81, E82, E83, E85, E86, E87, E90, E91, E92, E93, BMW Mini: R50, R52, R53

* Only supplied to genuine motor traders /garages. ct.

CH0915414

Universal Locking Wheel Nut Removal Kit

Description:

* Easy to remove most locking wheel nuts.

* Kit include shroud which protects the wheel against any damage

CH0915414-B

Universal Locking Wheel Nut Removal Kit

Feature:

* An effective and must have workshop tool.

* Kit includes shroud which protects the wheel against any damage.

* Simple to use master kit has the capability of removing practically any locking wheel nuts.

CHIH TAI Y&S CO., LTD.

CH0915414-C Universal Locking Wheel Nut Removal Kit

Feature:

CH0915526

E-mail: chihtai@ms16.hinet.net

* Suitable for removing all of types of locking wheel nuts.

* New design of steel wheel protecting shrouds.

* Tool kit includes shroud which protects wheel without damage.

* Remover locking wheel nuts, including new model: Ford, Jaguar & Range Rover.

* Kit including: -Impact Driver -Centre Punch -Hand Protection Ring -Main body & outer shroud -Hand Protection Ring -Blade A、B、C - 1/2” Impact Socket (24mm Hex) -Locking wheel nut remover (Jaguar) -Locking wheel nut remover (Ford) -Locking wheel nut remover (Range Rover)

14Pcs Wheel Locating Guide Set

Description:

* Includes seven pairs of locating guides.

* Designed to help align and mount the wheel.

* Male thread: -M12 x 1.25mm -M12 x 1.5mm -M12 x 1.75mm -M14 x 1.25mm -M14 x 1.5mm -M16 x 1.5mm

* Female thread: M12 x 1.5mm

CH081263 Universal Axle Nut Removal/Installation Kit

Description:

* Loose and tight the rear wheel nut.

* Both sides of pin are adjustable.

* To scale the hole in the center and add the wrench.

* Different sizes of pins are suit to different kinds of cars..

* Using loosening tightening of the rear housing nuts.

* Used in small vehicle (over 2 tons for circular nuts.)

* Function with the same wrench.

* Application range: Over 2 tons vehicles with circular nuts.

Specification:

* Main body: L:131 x1/2”Dr. W:28

* Nut (screw): M8 X P1.25

* 3pcs pin(mm): dia.5.5, 6.8, 9

CH1214116-A

Various Nut and Cap Key Set

Description:

* 2 pcs round adapter 6 mm

* 2 pcs round adapter 8 mm

* 2 pcs round adapter 10mm

* 2 pcs square adapter 6 mm

* 2 pcs square adapter 8 mm

* 2 pcs square adapter 10mm

CH121428

Telescopic Wheel Nut Wrench for Commercial Vehicles

Description:

* For installing and removing wheel nuts / bolts on commercial vehicles.

* Extra long lever arm (max. length 1,430 mm) allows application of high forces (up to 1,200 Nm in extended position).

* 3 parts – tool can be disassembled and allows space-saving storage in the storage or tool box.

* The fitting accuracy of interior and exterior tube provides exact and safe fit in every length.

* Safety pin avoids unintentional loosening – removing of safety pin with pin Ø 3 mm.

* Special welding method provides force-fit connection of inside square 20 3/4" and exterior tube.

CHIH TAI Y&S CO., LTD.

CH121459 Deluxe Hubcap & Wheel Lock Remover Kit

Description:

E-mail: chihtai@ms16.hinet.net

* Dual sided tapered lug nut socket ,7/8"(22mm) to 1-1/8"(28mm)

* Dual sided tapered lug nut socket, 3/4"(19mm) to 15/16"(24mm)

* Dual sided twist thread socket ,3/4" (19mm) to 13/16"(21mm)

* Hole through socket 15mm

* GM spline hubcap lock remover 14mm

* Singe end socket 15mm

* Ford/Chrysler hubcap lock remover 14mm

* Extractor Punch

* Socket Installing Driver

CH121466 1/2" Drive 7 PCs Wheel Bearing Locknut Sockets Set

Description:

* CH121466-A-- 55mm hex locknut socket designed for use on front wheel adjusting nuts found on Toyota EJ, LN , and AN models.

* CH121466-B 2-3/8" hex locknut socket works on 1984-92 Ford Rangers & Bronco ll with automatic locking hubs.

* CH121466-C 2-1/2" hex locknut socket fits hex nut found on rear axles and various front axles application on light -duty trucks.

* CH121466-D 2-1/2" rounded hex locknut socket. Works on 1995-96 Ford F/150 trucks and full-sized Broncos with automatic locking hubs.

* CH121466-E 2-3/4" rounded hex locknut socket. Works on 3/4 and 1-ton Ford F-250 and F-350 trucks with automatic locking hubs.

* CH121466-F 2-9/16" rounded hex locknut socket. Works on 1900-1993 Dodge trucks with Dana 60 manual hubs.

* CH121466-G 2-3/8" rounded hex locknut socket. Work on 1990-newer Ford Bangers, Bronco Iis, and Explorers with automastic locking hubs.

CH200870 9Pcs Center Sleeve Pin Set

Feature:

* Design to protect the wheel threads when taking off the wheel. * Center sleeves kit with inner thread for exact mounting of truck wheels.

* Not damage of thread

Content:

* 3pcs M18 x1.5, for DAF, Unimog, Iveco, MAN, Renault, Volvo

* 3pcs M20 x1.5, for Mercedes

* 3pcs M22 x1.5, for DAF, MAN, Mercedes, Ford, Renault, Scania, Volvo

CHIH TAI Y&S CO., LTD.

CH171201 4 in1 1/2” Dr. Impact Socket Set

Contents:

E-mail: chihtai@ms16.hinet.net

* 1pc x 4in1 1/2” dr. impact socket 17-19-21-22mm.

* 1pc x 1/2” dr. x 3”L extension bar.

Application:

CH171201-1 4 in1 Lug Nut Wrench Set

Specification:

* Covers 4 of the most common lug nut sizes

* In single flip socket

Feature:

Use with Air Impact Wrench for bolt tightening

Cross arm configuration allows fasteners to be quick spun

Lug wrench can be used as both a Traditional Cross Arm Wrench or as a T-Handle

T-Handle configuration provides additional leverage and makes breaking loose hard to remove fasteners easier

E-mail: chihtai@ms16.hinet.net

CH0812172 Wheel Lock Socket (7 Point,8mm)

Description:

* For removal special wheel nut for 7 point (Anti-thier).

* Size: 8mm x 7 point x 70mmL

Applicable:

* TOYOTA, HYUNDAI, HONDA … etc.

CH040757-7816 Wheel Nut Socket (7 Point,16mm)

Description:

* For removal special wheel nut for 7 point

* Size: 1/2”dr. x 16mm x 78mmL, dia.24mm HEX

CH0812120

Description:

* 1/2”dr. x 17mm x 45mmL

* Application range: Maybach,W221(S-class) , (CL-class)

Mercedes

* OEM Number : # 000 990 5407 .

CH0812120-A

Description:

* 1/2”dr. x 17mm x 80mmL

* Application range: Maybach,W221(S-class) , (CL-class)

Mercedes

* OEM Number : # 000 990 5407 .

CH0812132

Suzuki(Jimmy) Front Wheel Nut Socket

Description:

* Size: 1/2"Dr X 54mmL X 4 holes

* To install and remove nut of SUZUKI JIMNY front Wheel axle when bearing is broken.

* Due to the special design nut of SUZUKI JIMNY it is Hard to install or remove the nut without this tool.

* It can be used with torque wrench.

* Application: SUZUKI JIMNY front wheel axle

CH0812132

Suzuki(Jimmy) Front Wheel Nut Socket

Description:

* Size: 1/2"Dr X 54mmL X 4 holes

* To install and remove nut of SUZUKI JIMNY front Wheel axle when bearing is broken.

* Due to the special design nut of SUZUKI JIMNY it is Hard to install or remove the nut without this tool.

* It can be used with torque wrench.

* Application: SUZUKI JIMNY front wheel axle .

Description:

* For remove and installation of driveshaft nut

* The locking nut is very tight and deep in the hub and is not accessible without this wrench.

* Secure grip, heavy duty load capacity.

* For Suziki Jimmy

CH200879

Driveshaft Nut Socket (for Suzuki Jimmy)

CH1308184-A 10Pcs Wheel Stud Installer Tool

Description:

* Self-centering to insure that the stud is installed at the correct angle.

* Kits include a bearing seat and nut

* Will not damage wheel stud threads Automotive kit.

* Sizes: M12×1.25mm, M12x1.5mm, M12x1.75mm, M14x1.5mm

CH1308184

12Pcs Wheel Stud Installer and Internal Thread Tool

Description:

* Self-centering to insure that the stud is installed at the correct angle.

* Kits include a bearing seat and nut

* Will not damage wheel stud threads Automotive kit.

* Sizes: 7/16"×20 UNF, 1/2"-20 UNF, M12×1.25, M12×1.50 and M12×1.75 and M14×1.5

* Wheel internal thread kit, include sizes: M12×1.25mm, M12x1.5mm, M12x1.75mm, M14x1.5mm

* Application: Mercedes-Benz Models

CH050336 Universal Support Hook

Description:

* The Universal Support Hook can be your third hand to hold the steering knuckle or brake caliper, prevent the oil pipe or wire be tearing.

* Range:200~520mm

E-mail: chihtai@ms16.hinet.net

CH1214256 Valve Screwdriver

Description:

* Double sided usably for short and long valves.

* Also suitable for use as socket cap drive.

* Applicable: car, commercial vehicles and construction machines.

* There is another type CH1214256-V for cars and vans.

CH1214256-V Valve Screwdriver

Description:

* Double sided usably for short and long valves.

* Also suitable for use as socket cap drive.

* Applicable: cars and vans.

* There is another type CH1214256 for car, commercial vehicles and construction machines.

Tire Valve Stem Core Remover

Description:

* Size: CH051230-180, 180mmL

* Size:CH051230-50, 50mmL

* Most of types vehicle valve

* Use: release the core, remover holding the core firmly

CH080567-L Tire Valve Installer

Description:

*Designed for snap-in valve stems.

*Screws onto the tire valve threads and is used as a lever to pull the valve into the rim.

*Pivoting head is always at the proper angle.

*Polymer guard protects the rim.

*Great

*Special

E-mail: chihtai@ms16.hinet.net

CH0812153-H

6Pcs Wheel Stud Alignment Guide Tool Kit

Feature:

* Wheel bolt pilot pin guide tool makes it easier for you to mount wheels and tires by lining up the plug holes of the wheels to the hub, knurled end ensures a tight grip during installation and removal.

M12 x 1.25mm 2Pc: Audi, Volkswagen.

M12 x 1.5mm 2Pc: Acura, Honda, Hyundai, Kia, Lexus, Mazda, and Toyota Assists when mounting wheels, especially late models with long lug bolts. All Mercedes models with lug bolts.

M14 x 1.25mm 2Pc: Mini Cooper 2007-2015 BMW 2007 X5, 2008 X5, X6, 2009 750, X5, X6, 2010 750, 760, X5, X6, 2011 528, 535, 550, 740, 750, B7, X5, X6 2012-2015 328, 335, 528, 535, 550, 740, 750, B7, M5, X5, X6

M14 x 1.5mm 2Pc: BMW, Chrysler, Ferrari, Fiat, Ford, GM, Hyundai, Land Rover, Lamborghini, Opel, Mercedes, PSA, Renault, Saab, VAG, and Volvo

M15 x 1.25mm 2Pc: Vehicle's hub MUST be 15x1.25 thread size. Fit for Mostly car. Compatible with BMW, Audi, Volkswagen, Mercedes GLE 2019-2022, Porsche, and other European vehicles.

M16 x 1.5mm 2Pc: Fiat, Land Rover, and Peugeot.

E-mail: chihtai@ms16.hinet.net

Tire Gauge

CH041703

Digital Tire Pressure Gauge

Features:

* Unit Changeable: Kg/cm2-PSI-Mpa

* The buzzer will be enabled (Bi-Bi ring 15 seconds) when it be detected under 20psi.

* Pat. Pend.

Specifications:

1) Measure range: 0.00-11.00Kg/cm2 0.00-150.00Psi, 0.00-1.10Mpa

2) Clear, LCD Display

3) Temperature range: 0-50

4) Unit changeable: Kg/cm2-Psi-Mpa

5) Power source: Lithium and LR41 Alkaline

6) Supply voltage: MCU-3.0V LED-4.5V

CH080804

Digital Tire Gauge

CH080804-L2

Description:

* Auto power off-simple operation

Built-in backlight

Audible buzzer

Replaceable battery(led)

Clear LCD display

Calibration in bar, kpa and psi

Power source: Lithium and LR 44 alkaline Measuring range: 2-100psi

Resolution: 0.1 or 0.5 psi(0.05bar or 5kpa)

Accuracy: + - 1%, +0.5psi

Operation temperature: 10°c-30°c / 50°f - 86°f

Digital tire gauge

Description:

Auto power off-simple operation

Built-in backlight

Audible buzzer

Replaceable battery (led)

Clear LCD display

Calibration in bar, kpa and psi

Power source: Lithium and LR 44 alkaline Measuring range: 2-100psi

Resolution: 0.1 or 0.5 psi(0.05bar or 5kpa)

Accuracy: + - 1%, +0.5psi

Operation temperature: 10°c-30°c / 50°f - 86°f

E-mail: chihtai@ms16.hinet.net

CH080804-M Digital tire gauge

Description:

Body available in multiple colors

Auto power off-simple operation

Built-in backlight

Audible buzzer

Replaceable battery(led)

Clear LCD display

Calibration in bar, kpa and psi

Power source: Lithium and LR 44 alkaline

Measuring range: 2-100psi

Resolution: 0.1 or 0.5 psi(0.05bar or 5kpa)

Accuracy: + - 1%, +0.5psi

Operation temperature: 10°c-30°c / 50°f - 86°f

CH090954 3 IN 1 Tire Inflator W/Gauge

Description:

Application: For automotive, farm, bicycle, motorcycle & other inflatables.

* Aluminum body with plastics grip for comfortable to operating.

* 3 In 1 inflate, measure & deflate control valve for easy to operating.

* Clip type charging connector for tire gauge to operating long life.

* 360 swivel hose.

* Max. working pressure : 9.9BAR (990kPa)(140PSI)

* Wear eye protection when operating tool. CH1308262

CHIH TAI Y&S CO., LTD.

CH080850-B

Deluxe Pencil Type Tire Pressure Gauge

Feautre:

CH1520350

E-mail: chihtai@ms16.hinet.net

*Zinc Alloy Head in Sandblast with Chrome-Plated Finish.

*Metal Tube in Anodizing.

*2 Sided Metal Bar.

Specification:

* Accuracy :±1 psi

* Calibration :psi, kPa

* Pressure Range :5-50 psi or 50-350 kPa

Glad Hand Air Hose

Feature:

* Combined with dual chuck

* Glad hand connection included

* Low temperature against & easy to operate

* Convenient for inflate tires

Application:

* Truck with glad hand equipment

Specification:

* Valve type: Aluminum alloy (1/2”NPT)

* Hose length: 15M (8 x 12mm hybrid hose)

* Dual chuck: 12” straight

* Max. working pressure: 300PSI

* Medium: Non-corrosive gas

* Temperature range: -40 ~60 °C

CHIH TAI Y&S CO., LTD.

CH121432-AHM Pulley-Extractor and Reaction Tool

Universal application：

E-mail: chihtai@ms16.hinet.net

VW-Audi, Seat, Škoda, Opel/Vauxhall Ford, BMW, Mercedes, Peugeot, Citroën, Renault, Fiat, Japanese vehicles, etc. Loosen the retaining bolt and extract the Pulley. Suitable for all Pulleys with holes with a PCD Ø from 70 mm - 100 mm. Suitable for hole Ø from minimum 20 mm.

To lock the Pulley while loosening or tightening the retaining bolt, as well as preventing the Pulley from rotating duringextraction. Any available ½“ ratchet or extension drive may be used as the reaction tool.

Consists of:

* 1 x Puller Plate

* 3 x Hook Ø 20 mm

* 3 x Hook Ø 26 mm

* 3 x Shoulder Nut M10

* 1 x Pressure-Unit

* 1x Hammer (L=495mm)

CH1308286

Guide Sleeve Puller

Description:

* Allow guide sleeves to be pulled out and knocked in without incurring and damage.

* The puller works on the principle of an internal collet chuck.

* In engine and gearbox engineering, so-called guide sleeves are used for the accurate fixing of the housing halves.

* These guide sleeves, can be installed or removed with tongs or a hammer.

CH1308168

Clamp Set

Description:

* For holding the pre-tensioned clutch pressure plate during assembly and disassembly of the clutch.

Application range:

* Opel with front-wheel drive

E-mail: chihtai@ms16.hinet.net

CH1308170

Dismantling Mandrel for Release Bearing

Description:

* Required to pre-tension the circlip.

* For the quick and professional removal of the release bearing from the pressure plate.

Application range:

* Fiat Ducato, Peugeot Boxer, Citroën Jumper, Peugeot 406 with pull-type clutch

CH1308166

CH0911146

Puller for Clutch Release Shaft

Description:

* Intended for the removal of the clutch release shaft.

* This tool is needed when removing the gearbox, for example when replacing clutches or for gearbox repairs.

* For pulling type clutches fitted to: Mercedes, BMW, Fiat Ducato (1994 on)

Clutch Spring Compressor

Description:

* For BENZ 208 589 00 21 00 R T

* This tool is to setup a correct gape in transmission clutch.

* Use this tool with a hydraulic press.

* Sot the clutch on press table then place this tool on it and press the spring cylinder with press to the set-line on the cylinder for a correct gape.

* Application: BENZ 722.6 transmission clutch.

CH1308167

Clutch Cable Clamp

Description:

* When exchanging a clutch.

* The self-adjusting clutch cable has to be secured by means of the clamp.

* If this is omitted, the clutch cable has to be completely renewed.

* Suitable for VW Golf (II and III), etc.

CHIH TAI Y&S CO., LTD.

CH1308169 Clutch Centering Disc

Description:

E-mail: chihtai@ms16.hinet.net

* For the clutch disc mounted within the fly wheel.

* Adjustment is not possible without this tool, since the outer diameter of the centering disc is decisive.

Application range:

* Volkswagen, Audi, Seat and Skoda engines

CH081265

Automatic Transmission Clutch Spring Compressor(4 pin)

Description:

* Adjustable legs fit most cars & trucks for replacement of transmission rear clutch piston snap ring.

* Special design to assemble &reassemble the clutch snap ring easier.

* Capacity: clutch diameter from 64mm to 175 mm.

CH081298

Automatic Transmission Clutch Spring Compressor(2 pin)

Description:

* For removing and installing the transmission rear clutch piston snap ring.

* Special design to assemble &reassemble the clutch snap ring easier.

* General Transmission Repair Tool.

Application range:

* Adjustable for most models of American cars and light trucks.

CH0812246

Input Clutch Housing Spring Compressor Tool(GM)

Description:

* Remove the clutch spring retainer easy.

* The tool engages the lugs and pushes the piston return spring enough to access the snap ring.

* This rear clutch spring compressor tool will work in any TH350, 700R4, 4L60E, 4L65E and 4L70E transmission.

* Product ID: T-0149

CH0812258 Universal Transmission Clutch Spring

Compressor

Description:

*For removing and installing the transmission clutch piston snap ring.

*Adjustable for most models of European, Japanese and American cars and light trucks

CH1214386-A

Clutch Alignment Tool (Mini Cooper)

Description:

* This clutch alignment tool is used to install an new clutch in the manual transmission.

* OEM Ref.: 21 6 100 (83 30 0 493 999)

CH1214386-B

Clutch Alignment Tool (Mini Cooper)

Description:

* This clutch alignment tool is used to install an new clutch in the 6 speed manual transmission.

* OEM Ref.: 21 2 210 (83 30 0 494 261)

Description:

* Remover: Remove and discard the hollow input shaft snap ring. Install the fixture tool. Remove the clutch as an assembly with the tool.

* Installer: Remove the fixture tool from the clutch. Install the tool onto the transaxle case.

Application:

* B-MAX: 2012~

* EcoSport: 2012~

* Fiesta: 2008~2019

* Focus: 2010~2018

* Focus RS: 2016~2018

* OEM Ref.: 307-675

CH0812147

BMW DCT Dual Clutch Installer / Remover

Description:

* Special designed to remove and install the dual clutch.

Application range:

* BMW GS7D36SG (DKG) transmission.

* 2008-14 M3 , 135i , 335is , F10 / M5 , F12 , F13 / M6

* OEM No: 230 400

CH1214399

Positioning Electronic Clutch Tool (Fiat C510 Dualogic)

Description:

* To lock the selection lever insdie the actuation hydraulic unit.

* The tool should be fully tigtened and should not be removed to allow the hydraulic unit to be correctly fitted.

* Suitable for 1.3 MultiJet robotized gearbox (EURO5)

* OEM Ref.: 1871003400

CH1308240

Clutch Compressor

Description:

* Clutch Pressure Plate for Opel and Saab.

* The tool contains a steel plate with a number of concentric steps which allow the pressure plate to be accurately centered.

* A compression spindle is with axial bearing and pressure adaptor is mounted through the center of the steel plate to apply compression forces without distortion of the spring-fingers.

* Clutch pressure plates are not compressed in a normal benchvise or under a hydraulic press.

Advantage: No distortion of the pressure plate.

CH1308123

Clutch Centering Mandrels Set (2PCS)

Description:

* Two piece set of centering mandrels for clutches.

* Adjustable from 15-19mm and 20-26mm.

* Knurled screw expands diameter to fit the most vehicles.

* Material: Iron

CH1308123-6 6PCS Clutch Aligner Tool For Trucks

Description:

* For trucks with single or double disc clutches (universal)

* This tool set allows the correct alignment of single or double disc clutches of trucks and tractors to the engine.

* The clutch aligner kit contains centering sleeves with Ø 20, 5, 27 and 30mm.

Applications:

* Mandrel NO.1 is applicable on interior clutch hub- Ø from 3645mm inside

* Mandrel NO.2 is applicable on interior clutch hub- Ø from 4252mm inside

CH1308123-9

Universal Clutch Alignment Tool Kit

Description:

* The vehicles equipped with late-model front wheel drives without pilot bear in flywheel

Specification:

* Clutch Aligner Ø 15- Ø 28mm

* Adapter Size: Ø 12, 14, 15, 16, 17, 18, 19, 20mm

* Material: Nylon + Iron

CH1308196

Clutch Aligner Set

Description:

* Universal Clutch Aligner For hub- Ø: 15-28mm

* Because of the parallel expanding technology, it is possible to center the clutch plate to the clutch pressure plate or to the flywheel.

* The clutch aligner kit contains centering sleeves with Ø 12, 14, 15, 16, 17, 18, 19, 20mm

* For trucks with single or double disc clutches (universal)

* The tool allows the correct alignment of single or double disc clutches of trucks and tractors to the engine.

* Mandrel No.1 is applicable on interior clutch hub- Ø from 3645mm.

* Mandrel No.2 is applicable on interior clutch hub- Ø 42-52mm inside.

* The clutch aligner kit contains centering sleeves with Ø 20, 25, 27, 30mm.

Panel and Interior Fitting Repair Tools

Panel/Door Repair Tools

CH102153

Seaming Pliers - 11" Straight

Description:

* Drop forged steel construction.

* Dipped coating handle for comfortable grip.

* For folding of sheet metal.

* 60mm jaw width

CH102153-B

Seaming Pliers - 11" Bend

Description:

* Drop forged steel construction.

* Dipped coating handle for comfortable grip.

* For folding of sheet metal.

* 60mm jaw width, 50mm throat depth, 45degree bend blade.

CH102114

Narrow Pull Clamp

Description:

* Narrow Pull Clamp used for pulling frame up rails.

CH102109

Multi-Hole Pull Plate

Description:

* Can be easily bolted in multiple positions on vehicle and used to pull in straight lines.

* Suitable for use with bodyshop repair kits and chassis straighteners.

CH102110

Heavy Duty Clamp

Description:

* Drop forged Chrome Molybdenum alloy steel for maximum strength.

* Single-way pull operation.

* Dual self-tightening serrated jaws for a positive grip.

E-mail: chihtai@ms16.hinet.net

CH102110-A

Heavy Duty Clamp

Description:

* Drop forged Chrome Molybdenum alloy steel for maximum strength.

* Single-way pull operation.

* Dual self-tightening serrated jaws for a positive grip.

* To be used with slide hammer.

CH102155 Tight Opening Clamp

Description:

* Able to reach core support and upper sheet metal areas.

* Ideal for small pick-up frame rails.

CH102104 90 Degree Corner Clamp (Manual)

Description:

* Eliminates the need to use two separate clamps.

* Will be able to get into narrow, confined areas.

* Cross-hatched teeth are offset to provide a firm grip for straight ahead pulls on right angle corners.

* To be used with slide hammer.

CH102108

Small Mouth Pull Clamp

Description:

* Drop forged Chrome Molybdenum alloy steel for maximum strength.

* Single-way pull operation.

* Dual self-tightening serrated jaws for a positive grip.

* Ideal for work in tight areas.

CH102108-N

Small Pull Clamp with Top Pull

Description:

* Drop forged Chrome Molybdenum alloy steel for maximum strength.

* 44mm wide mouth with teeth

* With top pull and 360 degree self tightening pull ring.

* Dual self-tightening serrated jaws for a positive grip.

* Ideal for work in tight areas.

CHIH TAI Y&S CO., LTD.

CH102107 Big Mouth Pull Clamp

Description:

E-mail: chihtai@ms16.hinet.net

CH102107-NN

* Drop forged Chrome Molybdenum alloy steel for maximum strength.

* Single-way pull operation.

* Dual self-tightening serrated jaws for a positive grip.

Large Pull Clamp with Top Pull

Description:

* Drop forged Chrome Molybdenum alloy steel for maximum strength.

* Two-way pull operation.

* Dual self-tightening serrated jaws for a positive grip.

CH102106

Long Nose Clamp

Description:

* Drop forged Chrome Molybdenum alloy steel for maximum strength.

Specification:

* Jaw width: 30mm

* Total depth: 70mm

* Grip depth: 30mm

* 3 Ton straight pulling capacity

CH102106-M

Mini Clamp(Two-Way)

Description:

* Drop forged Chrome Molybdenum alloy steel for maximum strength.

* Two-way pull operation.

* Dual self-tightening serrated jaws for a positive grip.

* Ideal for work in tight areas.

CH102111

Frame Rack Clamp

Description:

* Drop forged Chrome Molybdenum alloy steel for maximum strength.

* Single-way pull operation.

* Dual self-tightening serrated jaws for a positive grip.

CHIH TAI Y&S CO., LTD.

CH102111-N Frame Rack Clamp (Two-Way)

Description:

E-mail: chihtai@ms16.hinet.net

* Drop forged Chrome Molybdenum alloy steel for maximum strength.

* Two-way pull operation.

* Dual self-tightening serrated jaws for a positive grip.

CH102112

Frame Rack Clamp (Multi-directional)

Description:

* Drop forged Chrome Molybdenum alloy steel for maximum strength.

* Special designed clamp for pulling up to three directions at once.

* Dual self-tightening serrated jaws for a positive grip.

CH102113

Adjustable Sill Clamp

Description:

* Maximum pulling width: 320mm

* Minimum pulling width: 120mm

* Bar width: 450mm

* 5 Clamping positions

* Clamp width: 120mm ( x 2 Clamps)

* 3 Ton straight pulling capacity

CH102105-106 3 Ton Scissor Clamp

Description:

* Self tightening jaws.

* 3 Ton pulling capacity.

* Suitable for a wide range of pulling applications.

CHIH TAI Y&S CO., LTD.

CH102105-108 3” C Clamp

Description:

* Capacity: 5 Ton

CH102105-109 6” C Clamp

E-mail: chihtai@ms16.hinet.net

* Multiple holes allow for various angle pulls.

* Throat opening: 3"

CH102121 Chain Handy Hook

Description:

* Capacity: 4 Ton

* Multiple holes allow for various angle pulls.

* Throat opening: 6"

CH102105-201 Chain Joint

Description:

* Quick tie-down for track systems or back anchoring on frame racks.

* Lip can be used for pulling damaged areas.

* Varied multiple uses for chain lengthening or shortening.

CH102105-202 Chain Joint

Description:

* Enables the use of two clamps side by side for more pull.

* For use with 5/16" or 3/8" chains.

Description:

* Use to make chain shorter or longer.

* For use with 5/16" or 3/8" chains.

E-mail: chihtai@ms16.hinet.net

CH102156

Small Weld & Pull Clamp

Description:

* For hard-to-hold pulls.

* Tack weld one of the reusable plates, then attach clamp and pull.

* Break tack weld with a grinding cut-off wheel or cutting torch.

* Capacity: 3 Tons.

* Dimensions: 135mm (Height) x 75mm (Width) x 20 mm (Thickness)

CH102156-L Large Weld & Pull Clamp

Description:

* For hard-to-hold pulls.

* Tack weld one of the reusable plates, then attach clamp and pull.

* Break tack weld with a grinding cut-off wheel or cutting torch.

* Capacity: 3 Tons.

* Dimensions: 132mm (Height) x 230mm (Width) x 20 mm (Thickness) CH102105-203

CHIH TAI Y&S CO., LTD.

CH102157 4Pcs Sheet Metal Hook

Description:

E-mail: chihtai@ms16.hinet.net

* Drop forged Cr-Mo steel hooks.

* Small Hook length: 12" ; Capacity: 3 tons

* Lmall Hook length: 15" ; Capacity: 3 tons

Contents:

* 1-pc Large flat nose hook

* 1-pc Large round nose hook

* 1-pc Small flat nose hook

* 1-pc Small round nose hook

CH0812136

Front Body Panel Guide Set

Description:

* These pins are screwed in place of the front panel mounting bolts to allow the panel to be slid away from the engine without disconnecting all fluid pipes etc.

* Application range: Volkswagen Transporter from 2004 onwards Equal to OEM T10288

* SIZE : M8 X 1.25 X 13mm X 200mmL (4 supplied)

CH1214346-A

Flexible PDR Line Board ( 600mm)

Description:

* Great visual aid for PDR (Paintless Dent Repair).

* Works well for insurance adjusters and taking photos of damage.

* Foldable in few seconds 600mm ---> 200mm.

* Examples of how the flexible pdr line board can be used are as follows :

* For documenting damage during handover of leased vehicles.

* For documenting minor damage to motor vehicles (parking damage).

* For documenting degree of deformation after a road traffic accident.

* For documenting quality of repair (surface finish).

* For quality control of surfaces in industry.

Operation type:

E-mail: chihtai@ms16.hinet.net

CH121403

Description:

* Hail damage, door dings and other cosmetic damage are quickly massaged out with this extensive 33 tool profit center.

CH121403-C

Description:

* Hail damage, door dings and other cosmetic damage are quickly massaged out with this extensive 33 tool profit center.

CH121479-S

Description:

* This Tap down tool is design for tapping down high spots and small dents.

* Great alternative for aluminum panel repairs.

CHIH TAI Y&S CO., LTD.

CH100801 4Pcs Mechanic’s Pay Bar Set

Description:

* Drop forged

* Fully heat-treated

* Sizes: 8", 12", 18", 24"

CH130801 4Pcs Pry Bar Set with Double Layered Handle

E-mail: chihtai@ms16.hinet.net

Description:

* 7/16 x 24 inches

* 7/16 x 18 inches

* 3/8 x 12 inches

* 1/4 x 8 inches

* Excellent quality

* Double layered handle

CH1308305

Trim Clip Remover

Description:

* Designed to remove trim clips on most vehicles.

* Finish: Black Oxide

* Material: PP+TPR Handle

CH1308305-L Trim Clip Remover

Description:

* Designed to remove trim clips on most vehicles.

* Finish: Black Oxide

* Material: PP+TPR Handle

CH1308307

Trim Clip Remover

Description:

* Designed to remove trim clips on most vehicles.

* Material: -Handle: PP -Blade: Carbon Steel

E-mail: chihtai@ms16.hinet.net

CH1308308

Trim Clip Remover

Description:

* Hardened and tempered carbon steel shaft with clawed head.

* Simplifies trim and trim stud removal

* Material: -Handle: PP -Blade: Carbon Steel

CH1308309

Trim Clip Remover

Description:

* Designed to remove trim clips on most vehicles.

* Material: -Handle: PP -Blade: Carbon Steel

CH1308310

Trim Clip Remover

Description:

* Designed to remove trim clips on most vehicles.

* Material: -Handle: PP -Blade: Carbon Steel

CH1308311

Trim Clip Remover

Description:

* Suitable for the removal of door trim clips on most vehicles

* Material: -Handle: PP -Blade: Carbon Steel

CH1308311-A

Trim Clip Remover

Description:

* Suitable for the removal of door trim clips on most vehicles

* Material: -Handle: PP -Blade: Carbon Steel

CH1308312

Trim Clip Remover

Description:

* Designed to remove trim clips on most vehicles.

* Material: -Handle: PP -Blade: Carbon Steel

CHIH TAI Y&S CO., LTD.

CH1308312-6

Trim Clip Remover

Description:

E-mail: chihtai@ms16.hinet.net

CH1308312-8

CH1308314-L

CH1308315

CH1308315-A

* Suitable for the removal of door trim clips on most vehicles

* Material: -Handle: PP -Blade: Carbon Steel

Trim Clip Remover

Description:

* Suitable for the removal of door trim clips on most vehicles

* Material: -Handle: PP -Blade: Carbon Steel

Trim Clip Remover

Description:

* Designed to remove trim clips on most vehicles.

* Material: Handle: PP

Trim Clip Remover

Description:

* Suitable for the removal of door trim clips on most vehicles

* Material: -Handle: PP +TPR -Blade: Carbon Steel

Trim Clip Remover

Description:

* Suitable for the removal of door trim clips on most vehicles

* Material: -Handle: PP +TPR -Blade: Carbon Steel

CH1308315-4P 4Pcs Trim Clip Removal Set

Description:

* Tools designed to simplify the removal of vehicle trims

* Set contains two door trim tools with U and V-profile tips, angled trim tool for using in confined spaces and window winder clip removal/ installation tool

* Material: -Handle: PP +TPR -Blade: Carbon Steel

CH1308313

Trim Clip Remover

Description:

* V-notch groove removes door and body trim fasteners.

* Long curved neck supplies adequate leverage.

* This tool will remove the most difficult trim fasteners without damaging the trim or body.

* Material: -Handle: PP -Blade: Carbon Steel

CH1308315-D

Door Handle Clip Tool

Description:

* For plastic upholstery fasteners

* Placing tool under edge of door panel and insert into fastener

* Removers door handle spring clips

* Tapered jaws retain clip in handle for easy reinstallation

* Reverse end removes door panels

* Without damaging upholstery

* Material: Carbon Steel

"V" notch double step blade tool dimensions: 8-1/8" L x 1-1/2" W

"U" notch blade tool dimensions: 8-1/8" L x 1-1/2" W x 1-1/16" H.

"U" notch blade tool dimensions: 8-1/8" L x 1-1/2" W x 1-1/16 H.

"V" notch blade tool dimensions: 8-1/8" L x 1-1/2" W x 1-1/16" H.

Reverse "U" notch blade tool: 9-1/8" L x 1-1/2" W x 1-1/16" H.

E-mail: chihtai@ms16.hinet.net

CH1308319 Door Upholstery Remover

Description:

* Hardened and tempered carbon steel

* Shaft with clawed head

* Simplifies trim and trim stud removal

* Material: -Handle: PP -Blade: Carbon Steel

CH1308320 3pcs Seam Slitter Set

Description:

* Separates spot welded or bonded panels easily

* Sharpened on three edges allowing a side impact blow to separate the panels

* The 90∘angled tool allows access in difficult areas

* Material: Blade: CR-V + PVC Coating

CH1214350

11Pcs Body Trim Tool Set

Description:

* Remove plastic fasteners that secure the door panel / trim piece without damage.

* Place the tool under the edge of the door panel / trim piece, and insert into fastener as far as possible then simply pry up.

* Distinct pivot point is designed for appropriate leverage and to discourage twisting that may damage panel or trim piece.

CH121441-A Door Hinge Remover & Installer Set

Description:

* Applicable: VW, Audi, Seat, Skoda, Mercedes, Renault.

* Bits size: M8, M10, M12, T30, T40, T45

CHIH TAI Y&S CO., LTD.

CH1214241

Door Jammer

Description:

E-mail: chihtai@ms16.hinet.net

CH1214353

* Holds door open while you hammer, pull, grind, sand or paint. * For door and deck lids. * Fits any size latch.

Door Handle Removal Tool

Description:

* Used for removal and installation of the lock cylinder housing on doors with no lock cylinder.

* This removal tool for car door handle allows trouble - free loosening of the hard-to- reach locking hook.

* Suitable for : VW Golf (VI), Fox, Tiguan, Passat B6 (3C) / Audi Q7, etc.

CH1308146

Description:

* For inside track closure with internal spring. * For fast and precise repair of the door lock. * Application range: VW Passat, Vento, Beetle, Lupo, Golf IV (not Golf cabriolet!), Seat, Skoda, etc.

CH1308147

CHIH TAI Y&S CO., LTD.

CH102122-V

E-mail: chihtai@ms16.hinet.net

Universal Holding Clamp (for Motor Vehicles)

Description:

* These door clamps connect with special adjustable extenders that have been designed to ensure during body straightening operations the door openings are not deformed.

* The articulated clamps make this device universal and once they are mounted in position, allow the door to be shut while working.

CH102122 Universal Door Clamp (for Trunk and Engine)

Description:

* This clamps is for trunk openings and engine.

* This set of clamps connected with adjustable extenders, was designed to insure during body straightening operations the trunk and engine openings are not deformed.

* Suitable for large size cars with big trunk door motor openings.

CH102120

Door Post Puller

Description:

* Applicable chain: 5/16", 3/8"

* Fixed on the car to pull sidelong-line.

CH1214409 Mini. Panel Clamp

Description:

* Clamps panels in place for welding and panel bonding.

* Allow door to be closed for alignment check before welding.

E-mail: chihtai@ms16.hinet.net

CH1214393-A

Push Pin Pliers-Straight Type

Description:

* Design for removing the plastic fasteners of push pin and locking pin.

CH1214393-B

Push Pin Pliers-Angle Type

Description:

* Design for removing the plastic fasteners of push pin and locking pin.

CH1214393-C

Push Pin

Pliers

Description:

* Design for removing the plastic fasteners of push pin and locking pin.

CH0812264

Pneumatic Panel Crimper

Description:

* Requires use of an air hammer/chisel with 0.401 inch shank size.

*16-18 gauge sheet metal, depending on the air hammer used and operating air pressure.

Feature:

* Performs panel patching jobs fast and in a uniform manner

* Heavy-duty chisel with 1/2" diameter

* 0.401 Parker Shank

* Full grip safety handle

* Rust resistant finish on body

* All parts are forged and heat treated for durability and consistency.

* Material : S45C

CHIH TAI Y&S CO., LTD.

CH110501

Sheet Metal Pounder (Handheld & Pneumatic)

Feature:

E-mail: chihtai@ms16.hinet.net

* Replaceable hammer tips, includes 4 kinds of materials, as aluminum, iron, brass and plastic.

* Applicate on automotive interiors and car sheet metal.

Operation

* To fasten, rotate it in clockwise direction.

* For replacement, hold the convex point of the spring and rotate it in a clockwise direction.

CH110501-1

Sheet Metal Pounder (Electric Tool)

Feature:

* Replaceable hammer tips, includes 3 kinds of materials, as aluminum, brass and plastic.

* Applicate on automotive interiors and car sheet metal.

CH1308119-H Mini Hard and Soft-sided Hammer, Nylon Shafts

Description:

* For automotive interiors and car sheet metal.

* Ultimate in reliability, convenience, and easily usage.

CH1308119-HA Mini Hammer, Nylon Shafts

Description: * Brass non-sparking tip – For use on soft metals and panels.

Ultimate in reliability, convenience, and easily usage.

CH1308322-B

CH1308322-C

CH0312107-B

12PCS Changeable Hammer Kit

Including:

CH1214390-9A

E-mail: chihtai@ms16.hinet.net

* 1pc-body hammer * 1pc- wrench * 4pcs-screws * 1pc-plastic board golden hammer * 1pc-aluminum board golden hamer * 1pc-copper alloy board golden hammer * 1pc-stainless steel board golden hammer * 1pc-lesser dentate board golden hammer * 1pc-larger dentate board golden hammer * 1pc-flat-bottom board golden hammer * 1pc-sharp-pointed board golden hammer * 1pc-oblique board golden hammer * 1pc-withdrawal of tool

9Pcs Aluminum Body Hammer Set

Description:

* Prevent cross contamination on aluminum parts of vehicles.

* Provide more forgiving strike than standard hammers, also avoid further damaged on aluminum panels.

Content:

* 1pc aluminum round large head hammer * 1pc aluminum pein / finishing hammer-horizontal, large * 1pc aluminum pein / finishing hammer-vertical, large * 1pc aluminum pein / finishing hammer-horizontal, medium * 1pc aluminum pein / finishing hammer-vertical, medium * 1pc aluminum pein / finishing hammer-horizontal, small, rubber cap * 1pc aluminum pein / finishing hammer-vertical, small, rubber cap * 1pc aluminum bumping hammer * 1pc aluminum pick/ finishing hammer

CH1214392-Z

One Hand Jack Tool Set

Description:

* Use this pry-style tool to create enough space to easily insert the air wedge without damaging the vehicle.

* 2pcs in a set, with 1pc wedge-shaped handle and 1pc round shaped handle

Body Hammer & Dolly

Description: * Aluminum hammers help prevent cross contamination on aluminum bodied vehicles

Aluminum hammers provide more forgiving strike than other hammers, avoiding further damage to aluminum panels * Lighter weight alternative to steel hammers * Rubber dollies provide a lighter option when accessing a tight, confined location behind an aluminum panel CH1214111-12

End Dolly

Round Head Chisel Dolly

Bolster Head Dolly

Crease Alignment Tool

Profile Arranging Block I + II

Hand Fist Flat + Curved

Large Rubber Dolly

Rubber Dolly

General Purpose Dolly

Block Dolly

Curved Dolly

Wedge Dolly

POM(copolymer)

Description: * Tough plastic handle can be hit with a hammer.

25, 28mm

Description:

* With 3” non-marring blade allows the technician to remove body side moldings and emblems quick and clean. * Durable plastic handle can be hit with a hammer. * Won’t mark or scratch vehicle finish. * Also for the basic opening of car door for insertion of lock out tools.

CH080705

5Pcs

Handy Remover Set

Description:

CH130821-6

CH1214121

CH1308132

E-mail: chihtai@ms16.hinet.net

* For plastic upholstery fasteners.

* Place tool under edge of door panel & insert into fastener as far as possible, ten simply pay up.

* A rugged tool.

6pcs Handy Remover Set

Description:

* For plastic upholstery fastener

* Great tools for trimming work

* Easy to use and without any scratch on body panel and interior mold

* Nylon with fiber glass material is uneasy to be broken

8 PCS Pry & Scraper

Description:

* We have 8˙"Flat Push/Push Extreme Edge Scraper" In "Extreme Edge" material, the perfectly shaped scraper for pushing and pulling gasket and other materials around difficult shapes like bolts and flanges.

* " Push/Pull Extreme Edge Scraper"In "Extreme Edge" material, the perfectly shaped scraper for pushing and pulling gasket and other materials around difficult shapes like bolts and flanges.

* A great general-purpose kit with strong, all plastic tools that is geared towards interior installation, trim and mechanical repairs as well as vehicle detailing duties.

* This combination of plastic scrapers and pry tools are molded in solid, glass-filled nylon for durability. A full selection of pry tools are including in the form of seven different shapes. A balance of flat and angled pry tools allows most clips, panels, or covers to be gently lifted while minimizing the likelihood of damage to the base materials.

* Material: Glass-filled Nylon

11Pcs Scraper Tool

Description:

* Professional kit contains 11 tools of various types and sizes for fast and convenient trim panel, upholstery and car interior elements removal (dashboard items, radios, door cards, moldings, etc)

* Plastic tools allow you to dismantle upholstery and plastic panels without scratching or damaging painted, leather, chrome-plated and other surfaces.

* Package also contains roll tool pouch for convenient tools storage and usage.

* Material: Nylon + Fiber

E-mail: chihtai@ms16.hinet.net

CH130869 Trim Panel & Scraper Tools

Description:

* Ideal for removing clips, fasteners, molding or gaskets from interior / exterior applications

* Will not damage delicate surfaces unlike metal removal tools

* Material: Pom

CH1308321 Plastic Without Damaging Paint Tools

Description:

* The tool offers a broad line of composite-plastic hand tools for prying and scraping. The material is much more durable than the cheap plastic of disposable paint scrapers. The tools are designed to avoid damaging sensitive surfaces, unlike metal tools which are more abrasive.

* Use composite pry bars to pull away automotive trim without damaging the paint job. Use a scraper to remove gasket material from an engine head without nicking the metal. The flat-bladed paint scrapers feature rounded corners, perfect for wallpaper removal without tearing the soft, chemically soaked paper face of the drywall.

CH1308133 4Pcs Scraper Tool

Material:

* Nylon + Fiber

E-mail: chihtai@ms16.hinet.net

CH090962 Pneumatic Puller

Description:

* Idea for repair the vehicle body small damage.

* Provide with pneumatic operation for easy to use.

* Design the pressure & flow control valve for safety operation.

* Stainless steel with PVC protect for high quality & long life.

* Front of pneumatic cylinder with air vent, Can be makes center shaft movement smoothly and help too cool down hotmelt glue.

* Air inlet: 1/4"

* Operating pressure : 3 bar~10bar (0.3~1MPa) (40~145Psi)

Content:

* 10 PCS Glue pads.

* 1 PC Extension Adapter.

CH200828

24pcs Mini Dent Puller Set

Description:

* Design for panel repair

* 8pcs: Hot Melt Adhesive size:1/2x25CM * 1pc- T type Sliding hammer * 1pc- Scraper * 1pc- Mini dent puller * 1pc-Glow gun * 9pcs-pulling Tab * 1pc-plastic dolly pen * 2pcs-Suction cup

* Material:S45C steel

CHIH TAI Y&S CO., LTD.

CH090961

Mine Sliding Hammer Set

Description:

* With 10 Pcs Glue pads

E-mail: chihtai@ms16.hinet.net

* With 0.95lb(0.43kgs) sliding hammer.

CH090962-P Dent Puller 10PCS Glue Pads Set

Content: *10PCS Plastic connector

CH090963

Manual Operation Dent Puller

Description:

* Idea for repair the vehicle body small damage.

* Aluminum steel with rubber protect for high quality & long life.

* Spring action center bolt allows for minor dent pulling operations.

* To be used with a hot glue gun.

* Manual Dent Puller with 10 pcs glue pads.

* Swivel pads provide stability on non linear surfaces.

E-mail: chihtai@ms16.hinet.net

CH090931-2

Air Dent Puller w/2PCS Pad (120 &150mm)

Content:

* With 3LB(1.36kgs) Sliding hammer.

* With brass shut off valve.

* With 13” length inlet hose.

* Air exhaust from the handle.

* With 1/4” air plug.

* with 2 pcs pad (120 &150mm)

CH090931-3 Air Dent Puller w/3PCS Pad (60,120 &150mm)

Content:

* With 3LB(1.36kgs) Sliding hammer.

* With brass shut off valve.

* With 13” length inlet hose.

* Air exhaust from the handle.

* With 1/4” air plug.

* with 2 pcs pad (60, 120 &150mm)

CH051052 Manual Vacuum Dent Puller

Description:

* Sliding hammer to ease dent without damaging to the pant surface.

* Comes with 3 suction pads.

* Get the power and versatility of a slide hammer without marring the finish by welding or drilling body panels.

* 4” and 5” rubber cups for small and large dents.

Specification:

* Rubber cup size: 75, 100, 125mm

* Material: steel & plastic

* Weight: 4.7kg

* Sliding hammer: 1.22kg

CH2008107 3Pcs Tap Down Tool Set

Description:

* Special design for the car body spot repair.

CH0312194-M

Molding Strip Tool

Description:

* The plastic structure won’t mark or scrape vehicle surface.

* The wedge angle makes it easy to segregate the double sided tape from the door and the vehicle body,

* The high impact POM structure allows used with a mallet on rigid applications.

* Pointy border allows the technician to easily get under door emblems and moldings.

* Can be used to replace manual handle and air gun handle.

E-mail: chihtai@ms16.hinet.net

CH121002 5” Contour Gauge

Description:

* Duplicate edge and corner contours on tile, sheet metal, wood, carpet and more with this handy contour gauge.

* The contour gauge is made of durable, lightweight polyethylene and features edge magnets to keep the gauge in place on metal surfaces.

* Size: 5”(125mm)

* Other available type CH121002-K with lock function

* Edge magnets keep the gauge in place

CH121002-1 10” Contour Gauge

Description:

* Duplicate edge and corner contours on tile, sheet metal, wood, carpet and more with this handy contour gauge.

* The contour gauge is made of durable, lightweight polyethylene and features edge magnets to keep the gauge in place on metal surfaces.

* Size: 10”(250mm)

* Other available type CH121002-1K with lock function

* Edge magnets keep the gauge in place

CHIH TAI Y&S CO., LTD.

CHIH TAI Y&S CO., LTD.

Interior Fitting Repair Tools

CH1214422-6

E-mail: chihtai@ms16.hinet.net

Metallic Wedge Tool (Curved & Straight) PAT.

Feature:

* Unique design fits in tight gaps for removing exterior and interior trims, moldings, panels, fasteners, clips, gaskets, dashboards, and more without damage.

* Slim radius taper end for optimum blend of strength and access.

* High strength thin tip (less than 0.0187”) with little deflection.

* Double-sided to increase its applicability and versatility.

* Metallic material is not easily damaged or broken, more durable than plastic panel removal tools.

CH1214422-1 Metallic Wedge Tool (Curved)

Feature:

* Unique design fits in tight gaps for removing exterior and interior trims, moldings, panels, fasteners, clips, gaskets, dashboards, and more without damage.

* Slim radius taper end for optimum blend of strength and access.

* High strength thin tip (less than 0.0187”) with little deflection.

* Metallic material is not easily damaged or broken, more durable than plastic panel removal tools.

CH1208103-P1

Trim Removal Pry Bar

Feature:

* For removing exterior and interior trim, molding, dashboards, and door panels.

* Two-sided to increase its applicability and versatility.

* Metallic material is not easily damaged or broken, more durable than plastic panel removal tools.

Feature:

* For removing exterior and interior plastic fasteners and clips * Two-sided to increase its applicability and versatility. * Metallic material is not easily damaged or broken, more durable than plastic panel removal tools.

CH1214280

Description:

* Prying apart electronic key fobs (battery replacement).

* Prying dashboard parts and vents. * Prying / smoothing epoxy, adhesives and silicone uniformly. * Paint stripping in confined spaces. * Removing / installing O-rings and gaskets. * Cleaning small parts.

Description: * Use to remove the air bag module from the steering wheel . * Work on many GM, Ford and Mercedes Benz vehicles * Applications: Ford 2000-2004 Taurus/Sable, 1999-2003 Windstar VanGM 1999-2005 Chevrolet Impala, Lumina, Monte Carlo, Venture, Pontiac Bonneville, Grand Prix, Montana, Buick LeSabre, Century, Regal, Olds Intrigue, Cadillac El Dorado, Deville, STS,SLS Mercedes Benz Models 107,123, 124, 126, 129, 140, 163, 164, 170, 201, 202, 203, 208, 209, 210, 211, 215, 219, 220, 221 and 463.

E-mail: chihtai@ms16.hinet.net

CH1308213 10Point Socket Set (Honda)

Description:

* To remove and install the seat tracks of driver side and front passenger side.

* Application on 2009 & up Honda Odyssey & Pilot.

* Size: 1/4”drive., 8mm & 10mm, 10 Point.

CH121434-12 12Pc. Universal Tool For Expanding Air Bag Set

Description:

* For the safe removal and installation of air-bag units in many popular cars

* 5 screwdriver inserts, 1 / 4 "drive, 80 mm long 。 T25 with bore hole forehead, e.g. BMW

T25, e.g. BMW

T30 with bore hole forehead, e.g. Audi, BMW, Mercedes, Opel

T30, e.g. Audi, Opel, Renault, VW

5 mm Allen, e.g. Audi * 7 Special Keys

2pcs Sentence (always used in pairs), e.g. VW Golf 4 / New Beetle / T4, Seat, Skoda Fabia / Octavia from'99

2pcs Sentence (always used in pairs), e.g. VW Lupo / Passat B5 / Polo from'99 Audi A4 / A6, Skoda Superb

Universal use, to unlock the inner ring responsible for VAG

From'99 VW Bora / Golf 4'98-04 / Passat from'97

VW New Beggar'99-04 / Golf / Jetta / Passa

CH1214180-BH

Air Bag Removal Tool (Land Rover)

Description:

* To release the driver airbag module from steering wheel.

* Suitable for Land Rover Discovery 3-4, Freelander 2 and range rover sport.

* OEM Ref.: 501-106

Illustration:

* Place the hook into the small slot on the side of steering wheel.

* Insert the tool and then engage the retaining spring.

* Pull on the tool while pushing gently on the airbag. (to reduce the pressure on the retaining spring.)

E-mail: chihtai@ms16.hinet.net

CH1308145 Spring Tool For Steering Lock Protection sleeve (2PCS)

Description:

* For Mercedes W129, W140, W210 and W202 with FBS2 Ignition Switch.

CH1214205-P

Description:

* A simple and perfect tool for correct body/ interior alignment (the gaps on hoods, deck lids, doors )

* Very useful tool, especially for bearing work and for gauging slots.

* Measuring capacity: 0.5-11.5mm

* Graduation: 0.1mm

CH1214319-S

E-mail: chihtai@ms16.hinet.net

CH0812134 VW Cigarette Lighter Release Tool

Description:

* Used for removing 12 volt socket.

* Application range: 。 Audi A4 2001 / Audi A4 2008/ Audi Q5 2008/ Audi A6 2005 / Audi Q7 2007. 。 VW OEM no.ref: T40148

CH121405

46Pcs Radio Removal Tool Set

Contents:

* 2pc-Kenwood 2 1998-2001 * 2pc-Sony 2 ab 2002

* 2pc-Kenwood 3 ab 2002

* 2pc-Pioneer & Jvc * 2pc-Sony 1 bis 2001 * 2pc-Panasonic * 2pc-Panasonic 2006

* 2pc-Mercedes Benz & Bmw * 2pc-Mercedes Benz & Bmw * 2pc-Mercedes Benz & Bmw * 2pc-Clarion-neu * 2pc-Clarion (ALT) * 2pc-Fiat Brava * 2pc-Opel

* 2pc-Blaupunkt, Grundig, VW, Audi, Ford * 1pc-BMW

* 4pc-VW, Audi, Becker, Mercedse Benz * 2pc-Becker, Prorsche, Mercedse Benz * 2pc-VW

* 1pc-BMW, Opel-Inbus * 2pc-Becker Neu ab 2002 * 2pc-Skoda Nec ab 2002

* 2pc-Blaupunkt Neu ab 2002

* Material: Stainless steel

CH121405-20

20Pcs Radio Removal Tool set

Description:

* Set includes the following tools needed to install and remove radios: 。 4pc. Radio Removal Keys (New VW Beetle/Audi)

2pc. Radio Removal Keys (Mercedes Benz)

2pc. Radio Removal Keys (VW)

2pc. Radio Removal Keys (New Skoda)

2pc. Radio Removal Keys (New Becker)

2pc. Radio Removal Keys (Pioneer)

2pc. Din Radio Removal U-Hooks (New Blaupunkt)

1pc. Allen Hex Wrench (BMW)

2pc. Din Radio Removal U-Hooks (Ford/VW/Audi) 。 1pc. Special Pentagon Wrench (BMW)

* Material: Stainless steel

CH090955 Refill Pressure Sprayer

Description:

* Ideal for lubrication, paint, clean, dust, antirust…etc.

* 2 function design for easy to operation.

* Long type nozzle suitable for narrow & difficult space spray.

* Refill pressure with universal valve stem for easy to stuff air pressure.

* Build in safety valve presetting 90psi (6.3BAR)

* Aluminum canister for long life use.

* Max. capacity: 650c.c.(FL. OZ: 22)

Warning!!

* Keep out of reach of children.

* Always wear eyes protection when operating or performing maintenance on this tool.

* Do not use with strong chemical or corrosive fluid.

CHIH TAI Y&S CO., LTD.

CH090955-2

Refill Pressure Sprayer

Description:

E-mail: chihtai@ms16.hinet.net

* Ideal for lubrication, paint, clean dust, antirust...etc.

* 2 function design for easy to operation.

* Long type nozzle suitable for narrow & difficult space spray.

* Refill pressure with universal valve stem for easy to stuff air pressure.

* Aluminum canister for long life use.

* Provide with the safety valve, pre-setting 90Psi (6.3kg/cm2)the exceed pressure will be Relief automatically.

Specification:

* Working pressure 90Psi(6.3BAR)

* Max. Capacity 650cc

Application: Operation:

CH090955-3 620CC High Pressure Sprayer

Description:

*New environmentally-friendly product

*Refill pressure with universal valve stem for easy to stuff air pressure

* Thickened aluminum canister for long life

*Ergonomic trigger design for easy to operate

*Ideal for detergent , lubrication, rust-cleaning, brake system cleaning ,anti-rust ,washing parts...etc

*2 function design for easy to operation

*Long type nozzle suitable for narrow & difficult space spray

*Refill pressure with universal valve stem for easy to stuff air pressure.

CH090955-4

Specification:

Max. working pressure: 140psi (9.65Bar , 965kpa) Safety valve pre-set: 125- 140psi (8.9 9.65bar, 890-965kpa)

Relief pressure of safety valve: 141-175psi (9.72 12.1Bar, 971--1210kpa)

Bottle max. capacity: 620cc (21 OZ) Max. loading fluid capacity: 400cc (14.1 OZ)

1000CC High Pressure Sprayer

Description:

*New environmentally- friendly product

*Refill pressure with universal valve stem for easy to stuff air pressure

* Thickened aluminum canister for long life

*Ergonomic trigger design for easy to operate

*Ideal for detergent , lubrication, rust-cleaning, brake system cleaning ,anti-rust ,washing parts...etc

*2 function design for easy to operation

*Long type nozzle suitable for narrow & difficult space spray

*Refill pressure with universal valve stem for easy to stuff air pressure.

Specification:

Max. working pressure: 140psi (9.65Bar , 965kpa) Safety valve pre-set: 125- 140psi (8.9 9.65bar, 890-965kpa)

Relief pressure of safety valve: 141-175psi (9.72 12.1Bar, 971 1210kpa)

Bottle max. capacity: 1000cc (33.8 OZ) Max. loading fluid capacity: 600cc (20.3 OZ)

Window/Windshield Tools

CH091150 Adjustable Windshield Leverage Device

Description:

* After windshield is released from top and sides of vehicle.

。 Step1: Insert pumper between upper windshield and body of vehicle.

。 Step2: Insert pumper to desired position, don’t over-inflate! 。 Step3: Cut adhesive at the bottom of windshield in ingrements.

。 Repeat Step2 &3 until windshields is released.

CH091151 Adjustable Windshield Leverage Device

Description:

* Item No.: CH091150-02: Ø40 X 460

* Item No.: CH0911-01: 325 X 120 mm

CH091152 Adjustable Windshield Leverage Device

Description:

* Item No.: CH091150-02: Ø40 X 460

* Item No.: CH091151-01: 325 X 120 mm

* Item No.: CH091150-01: 420 X 140 mm

CH091153

Inflatable Hand Pumper W/5Pcs Inflatable Pads

Description:

* Item No.: CH091150-02: Ø40 X 460

* Item No.: CH091151-01: 325 X 120 mm

* Item No.: CH091154-01: 160 X 160 mm

* Item No.: CH091154-02: 190 X 55mm

* Item No.: CH091154-03: 190 X 35mm

CH091154

Inflatable Hand Pumper W/3Pcs Inflatable Pads

Description:

* 1pc inflatable hand pumper

* 1pc 7”(180mm) x 1-1/2”(38mm)

* 1pc 7-1/2”(190mm) x 2-3/8”(60mm)

* 1pc 6-3/8”(160mm) x 6-3/8”(160mm)

CH091155

Inflatable Hand Pumper W/6Pcs Inflatable Pads

Description:

* Item No.: CH091150-02: Ø40 X 460

* Item No.: CH091151-01: 325 X 120 mm

* Item No.: CH091150-01: 420 X 140 mm

* Item No.: CH091154-01: 160 X 160 mm

* Item No.: CH091154-02: 190 X 55mm

* Item No.: CH091154-03: 190 X 35mm

CH091156

Inflatable Hand Pumper W/4Pcs Inflatable Pads

Description:

* Item No.: CH091150-02: Ø40 X 460

* Item No.: CH091150-01: 420 X 140 mm

* Item No.: CH091151-01: 325 X 120 mm

* Item No.: CH091154-01: 160 X 160 mm

CH091157 Adjustable Windshield Leverage Device

Description:

* Item No.: CH091150-02: Ø40 X 460

* Item No.: CH091157-01: 260 X 95 mm

CH152001 Suction Lifter With Two Vacuum Cups

E-mail: chihtai@ms16.hinet.net

CH1214361

Windshield Washer Nozzles Adjustment Tool

Description:

* For adjusting the fan washer nozzles for the window cleaning system.

* Suitable for Mercedes W204, W207, W212, W218.

* OEM Ref. 001 589 02 16 00

CH130832

Christmas Tree Molding Removal Tool

Description:

* The broad flat head helps eliminate deformation of the Christmas tree molding or damage to the windscreen during removal or replacement. Useful for door trim/ interior trim removal. Soft grip handle for user comfort

* Material: -Handle: PP + TPR -Blade: Carbon Steel + PVC Coating

CH130862

Windshield Locking Strip Tool

Description:

* 2 double end tips fits most applications

* The unique design allows the tip to swivel 90∘in either direction to work where others will not.

* Select the tip that most closely fits the locking strip. Insert the tip into the rubber gasket and thread the locking strip into the eyelet of the tool.

* Now work the tool around the windshield while feeding the locking strip into the eyelet.

* Material: -Handle: PP -Blade: Stainless Steel

CH130861

4Pcs Windscreen Removal Tool

Description:

* Aluminum construction with vinyl handles.

* Hardened then honed blade allows fast separation of screen from bond and can be re-sharpened.

* Material: -Handle: Aluminum + PVC Coating -Knife: K5

E-mail: chihtai@ms16.hinet.net

CH130839

Quick Release Windscreen Removal Tool

Description:

* The blade is suitable for cutting through bonding resin used to fix modern windscreens. Push-button for fast blade changes and cutting depth adjustment. Knurled handle with heavy-duty and protected cable.

* Supplied with 3 shaped and 3 flat scraper blades, suitable for removing resin residue.

* Material: -Handle: Aluminum -Knife: K5

CH130841

Windscreen Removal Tool-Standard

Description:

* Aluminum handles with alloy steel blade. Special shaped blade is suitable for cutting through bonding resin used to fix modern windscreens.

* Material: -Handle: Aluminum -Knife: K5

CH130842

Windscreen Removal Tool-Standard

Description:

* Aluminum handles with alloy steel blade. Special shaped blade is suitable for cutting through bonding resin used to fix modern windscreens.

* Material: -Handle: Aluminum -Knife: K5

CH1308188

CH1214201 Window Belt Molding Remover

Description:

* Slide the tool downward between the window exterior and the door. (The channel side of the tool should face the door.)

* When the tool channel is below the belt molding, push or pull the tool upward.

* The tool quickly removes the belt molding without damage to the window or the molding.

CH130829

Side Window Holder - Pair

Description:

* 2 pairs of suction cups linked with sheathed, flexible steel cables.

* Designed to retain side windows in closed position while working around winding mechanism.

* Material: PVC

CH130834

Windscreen Cutting Wire Pull Handle Set

Description:

* Cutting edge wire is attached by means of a cone in the handle

* Aluminum construction with vinyl handle. Vinyl covered handle and grip for extra comfort in use

* Material: -Handle: Aluminum + PVC Coating

-Blade: Carbon Steel

CH130835

Straight Handled Wire Starter Tool

Description:

* The rubber cover on the handle is for a comfortable grip that prevents scratching and chipping to the wiper arm.

* Each end of the puller is different size and depth to allow you to use this tool on virtually any car.

* 1 end is wide and has a concave lip to work on the older style wiper post. The narrow end is designed for newer cars and has a longer lip that allows you to put pressure on the tip and sides of the wiper arm to easily release the arm from the post without any damage to the vehicle.

* Material: Blade: Carbon Steel + PVC Coating

CHIH TAI Y&S CO., LTD.

CH130833

T-Handle Wire Starter Tool

Description:

E-mail: chihtai@ms16.hinet.net

* Stainless steel shaft with contoured T-handle for added grip and comfort.

* Designed for feeding/ starting wire through bonding on windscreen.

* Length: 330mm

* Material: -Handle: PP -Blade: Stainless Steel

CH1308227

Windscreen Removal Tool Set

Content:

* The set includes

1. Braided wire (3 strand)

2. Wire gripping handles x 2

3. Windscreen removal tool-cuts the adhesive around the screen

4. Wire feeder tool-designed for easy and flexible insertion of wire through polyurethane, allowing speedy removal of bonded windscreen

5. Trim pad remover

6. Cold knife blade x 2

CH1308330

Windscreen Removal Tool Set

Description:

* Ideal and essential kit for removing the vinyl adhesive compound around the windshield.

* Allows the service more convenient and easier even on acutely angled windshield.

CH130866

Straight Handled Wire Starter Tool

Description:

* Suitable for inserting cutting wire through urethane bond.

* Designed for using on vehicles with deep dash where the urethane is positioned below the line of the dash or where space is otherwise at a premium.

* Large comfortable handle enables firm control of the tip of the tool

* Material: -Handle: PP + TPR

-Blade: Stainless Steel

CHIH TAI Y&S CO., LTD.

CH130838 Wire Guide

Description:

E-mail: chihtai@ms16.hinet.net

* Hardened and tempered carbon steel shaft. Unique head design allows access to bonding when used in conjunction with cutting wire. Features textured comfort grip handle

* Material: -Handle: PP + TPR -Blade: Stainless Steel

CH130865

Double Direction Molding Release Tool

Description:

* Used for releasing body molding clips

* Double sided design is suitable for a variety of clip configurations.

* Hardened and tempered steel head with comfort grip handle.

* Material: -Handle: PP + TPR -Knife: K5

CH130864

Rear View Mirror Release Tool

Description:

* Enables fast removal of mirrors. Slide prongs between mirror and bracket to release

* Application: Ford, Vauxhall, Opel

* Material: Blade: Stainless Steel

CH1308329

Install Channel – Type Moldings Tool

Description:

* The tool has a nylon roller that is pulled against the molding. This action seats the butyl against the glass so the molding stays in place. It has a clear acrylic roller attachment that you can see through the tool and make sure you are seating the rubber properly.

E-mail: chihtai@ms16.hinet.net

CH1308331

7pcs Guide Pins

Description:

* For use in instances where the windshield extends over the bottom of the pinchweld.

* In these cases, it is necessary to use guide pins to guide the wire/ cord into the urethane to avoid damaging the pinchweld.

* Start with the guide pin flush with the edge of the glass then slide each pin into the urethane until secure.

* Space all 7 pins out evenly along the bottom of the windshield prior to running your wire/ cord.

* This will keep your wire/ cord secure and protect the pinchweld.

CH1308332

Auto Glass Installation Stick Tool

Description:

* Use the rounded end for helping with tucking or removing molding, prepping urethane, etc. You can also use the chisel end to remove urethane as a pinchweld scraper.

* Tapered or Chisel End Tools.

* Tapered on Both Ends.

* Handle for installation stick

* Material: -Handle: PP -Blade: ABS

CH1308333

Pinchweld Trimming Set

Description:

* These blades are sharpened on the outside of the curve and help to avoid damage to paint when removing excess urethane after a windshield removal or removing urethane with shattered tempered glass fragments.

* Set includes 3 Winged blades (1/2”, 3/4” and1”), one 1-9/16” wide prep blade, 1-handle and 1-hex key.

CH1308215

Belt-Molding Removal Tool

Description:

* Insert tool between window glass and door

* Engage Molding clips with tool blade

* Pull up to release each clip and remove molding

* Overall length: 10”

CH0812220 Wiper Puller

Description:

* Wiper arm puller is a tool exclusive for removing wiper arm for full control shield and semi-con shield.

* Since the support bolt is attached, it can work reliably without being displaced.

* Can not used on following vehicles: -Toyota: High rack Surf (KZN18 # system)

-Nissan: Terrano (RR50 system)

-Honda: Civic (EK4 system: the driver's seat side)

-Daihatsu: Mira (L500S system)

CH081259

Universal Windshield Wiper Puller

Description:

* Spindle end with brass cap to prevent damage to the windscreen wiper arm.

* Suitable for many automobiles and commercial vehicles.

* No damage to the wipers , shaft, scratching the paint ,no damage to glass.

* Heavy execution for loosening the tightest of wiper arms.

Application range:

* VW: Polo, Lupo

* Opel: Astra G, Zaphira B, Corsa C, Vectra C,

* Honda: Jazz, CRV, FRV, Accord, Turnier.

* BMW: 5er Modell ab E 39 bis Baujahr 05. 7er Modell ab E 38 bis Baujahr 05.

* Audi: A3, A4, A5, A6. Audi Q7 and other SUVs.

* Ford: Galaxy, Alhambra Mercedes: A-Klasse und B-Klasse ab Bj. 05

* VW: Touareg, Porsche Cheyenne und andere SUV.

CH121416-A

Universal Windscreen Wiper Arm Puller Set for cars and trucks

Description:

slide hammer * Cars: Audi, Alfa-Romeo, BMW, Chrysler-Jeep, Citroen, Chevrolet-Daewoo, Daihatsu, Fiat, Ford, Honda, Hyundai, Jaguar, KIA, Land Rover, Mazda, MG-Rover, MB, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Smart, Suzuki, Toyota, Volvo, VW... * Trucks: MAN, MB, Scania... * Patent：Europe, U.S.A, Taiwan

CH091540

Windscreen Wiper Arm Removal Tool

E-mail: chihtai@ms16.hinet.net

CH091540-A

CH1214388

Description:

* This special design offers easy access in confined spaces and eliminates the risk of damage to the wiper arms.

* A simple, effective tool allowing easy removal the stubborn wiper arms.

* Size: 16mm x 46mm

Windscreen Wiper Arm Removal Tool

Description:

* This special design offers easy access in confined spaces and eliminates the risk of damage to the wiper arms.

* A simple, effective tool allowing easy removal the stubborn wiper arms.

* Size: 26mm x 42mm

Self-Gripping Puller( Wiper arm & Battery terminal)

Description:

* A dual-purpose puller.

* Easily removes windshield wiper arm and battery terminal.

* Can be easily positioned due to its self-gripping spring mechanism.

CH1214281

Windshield Wiper Arm Puller

Description:

* The puller is specially design for the rear wiper arm shaft with washer nozzle.

* Size: 3/8”dr. x 17mm

* Suitable for VW, Audi, Skoda, Seat, etc.

E-mail: chihtai@ms16.hinet.net

CH0915532-A Wiper Angel Adjustment Tool (Tesla Model X&S)

Description:

* Befitting for TESLA MODEL X&S

* Design to check and adjust angel between windshield wiper arm and windshield.

* Fixed adjustment tool at the front of the wiper arm, adjusting angel with open-ended wrench (24mm) to suitable angel.

* Using range: ± 20∘

* Suitable specification of arm: -LHD & RHD vehicle, driver’s side: 1.5∘± 3∘ -LHD & RHD vehicle, passenger’s side” 1.7∘± 3∘

CH0915532-B Wiper Angel Adjustment Tool (Tesla Model 3)

Description:

* Befitting for TESLA MODEL 3.

* Design to check and adjust angel between windshield wiper arm and windshield.

* Fixed adjustment tool at the front of the wiper arm, adjusting angel with open-ended wrench (24mm) to suitable angel.

* Using range: ± 20∘

* Suitable specification of arm: -LHD & RHD vehicle, driver’s side: 1.5∘± 3∘ -LHD & RHD vehicle, passenger’s side” 1.7∘± 3∘

CH200896 Wiper Arm Repair Set

Description:

* For repairing the rusted tight arm linkages.

* Application: VW Golf4, Audi A3, Seat, Skoda, etc.

Content:

* 1pc Expressing fork, for removing the safety moon rings.

* 1pc Special punch, for deflecting extremely firm wiper axles.

* 1pc wire brush, for cleaning teeth at the wiper arm axle.

* 1pc T-grasp reamer, for cleaning and finish-reaming of the locating hole.

* 20pcs snap rings

CH200897

Rear Window Washer Repair Set

Description:

* For repairing the rear window washer.

* With this tool the remainder of the broken off washer nozzle is drilled out of the windshield wiper axle and if necessary the broken brass tubing in the rear windshield wiper motor is repaired.

* By using the windshield wiper axle screw as a guide the milling cuter for removing the remaining nozzle or the drill for removing the remaining riser piper is accurately positioned.

* The brass tubing is replaced by the closed plastic tubes.

Application:

* VW, Audi, Ford, Seat

Description:

* Design for door window glass regulator adjustment

* Suitable for Jaguar & Land Rover)

Description:

* This set protection elements enable to protect the dashboard during the cutting of the windshield joint by successive moves.

Content:

* 1pc small size straight protection part, 273x200mmL

* 1pc small size curved protection part, 273x200mmL

* 1pc big size straight protection part, 300x455mmL

* 1pc big size curved protection part, 300x455mmL

E-mail: chihtai@ms16.hinet.net

CH130863 Windscreen Cutting Wire

Description:

* Suitable for using with wire-grips

* Use a sawing action to cut through the urethane bond.

* Length: 22.5mtr

* Material: High-Carbon Steel

CH130836

Windscreen Cutting Wire

Description:

* Becoming more popular than braided wire Stainless steel square profile has 4 cutting edges enabling fast and easy cutting of urethane bond even in cold conditions

* Length: 22.5mtr

* Material: High-Carbon Steel

CH130863-N

Windscreen Cutting Wire - Nylon

Description:

* Nylon wire offers a more gentle approach to sensitive work areas when cutting windscreen bond.

* Conventional metal cutting wire is risk of damaging to other surfaces of the vehicle.

* Comparable in performance to metal cutting wire.

* Length: 50mtr

CH130863-TR

Windscreen Cutting Wire - Triangle

Description:

* Suitable for use with wire – grips. Use a sawing action to cut through the urethane bond.

* Length: 22.5mtr

* Size: 0.6mm (Triangle)

* Material: Stainless Steel

Other Outer Car Tools

CH051050-55 Quick Removing Sucker

Description:

* Design to remove lamp housing, rear mirror, etc.

* No need for multiple tools and complicated procedure.

* Simple and straight forward operation.

* Dia.: 55mm

* Loading: 5kgs

CH051050-85 2Pcs Quick Removing Sucker Set

Description:

* Design to remove lamp housing, rear mirror, etc.

* No need for multiple tools and complicated procedure.

* Simple and straight forward operation.

* Dia.: 85mm

* Loading: 10kgs

CH120850

2PCS Light Cover Remover Set

Description:

* Easy removes automobile front and tail light covers without cracks.

* Universal application for light covers with clips, but not for those fixed with screws and nuts.

* Slip-resistant handle provides secure gripping.

* Plastic proves avoid creating scrapes on light cover surface.

Content:

* A: Plastic Probe- 198 x 18.4 x 0.7mm, PC

* B:Remover- 198 (straight) x 17 x 1.2mm 205(angled) x 17 x 1.2mm Material: S50C

* C:Handle- 118 x 28.2 mm ,PP+TPR

Instructions:

* Step 1: Locate light cover clips by plastic probe.

* Step 2: Make sure the clips location.

* Step3: Use the straight or angled remove to lift up the light cover.

* Step4: Light-related services can be done.

CH1214352

Description:

*

*

* Size: 3/8” x 14mm x 195L

CHIH TAI Y&S CO., LTD.

CH200854 Special Wrench for Head Light

Feature:

E-mail: chihtai@ms16.hinet.net

* Special for adjust the front head light special nut.

* Save money and time to use the right tool.

* Suitable for Audi A4 8K,A6 4G,A5 8T VW Passat and Touareg

CH1214414-A

CH1308189

Bulb Pliers

Description:

* Works on vast array of miniature type bulbs commonly used on automobiles, boats, airplanes, pinballs, arcade/video games, vending machines, coin op equipment and a multitude of electronic devices.

* For hard to reach bulb locations.

* Cup-type ends create circular gripping area.

* Rubber coated gripping area for secure and safe use.

Needle Set For Tail Gate Lock

Description:

* Suitable for Mercedes C-Class (W203) Tailgate lock.

E-mail: chihtai@ms16.hinet.net

CH1214240

Universal Lift Support Clamp

Description:

* Holds gas charged lift supports found on hoods, tailgates, hatchbacks and trunks.

* Securely holds weak lift supports in the extended position to allow access to the engine compartment or luggage area.

* Aluminum body and brass threads prevent damage to the lift support shaft.

* Application range: 10.2mm

* Other available large type as CH1214240-A, range:13mm

CH1308148

4Pcs Removal Tool Set

Description:

* Required to remove the high-level brake-light from the tail-gate.

* All four retaining clips must be held open using the 4 piece removal tool set.

* Failure to use these tools will result in damage to the mounting bracket and the brake-light.

* Suitable for Mercedes E-Class (W210) Estate Car.

CH050341

Parking Sensor and Lens Hole Maker

Description:

* Hole size: 17,18,18.2,19,20,22.5,24,26,26.7,32mm

* Cut hole thickness: less than 5mm

* Includes 5/16” HSS drill bit

CH0915118

Exhaust and Tailpipe Cutter

Description:

* Fifteen blades effectively cut pipe so only 1/4”turn is needed for a complete cut.

* Use tool to cut pipes 3/4” to 3”(19 to 76mm) in diameter.

* Not for use on stainless steel.

E-mail: chihtai@ms16.hinet.net

General Repair Tools

Fluid Extractor & Oil Extractor

CH090937

Hand Operation Fluid Extractor PAT.

Description:

* Capacity: 9.5L (2.5 Gal.)

* Two air outlet with check valve design on handle for easy & quick to release air pressure from the extractor.

* Easy to operate suitable for engine oil, gear oil, brake fluid, coolant, water..etc.

* Provide with new decompression valve for easy to release the negative pressure.

* Fixing valve & safety cup for automatic cut-off extracting.

* Non-spark, no-power fluid extractor.

* Include 3kinds nylon tubes can be extracting any non-corrosive fluid.

* Include “A” 1.5 meter silicon hose with one touch controller & universal rubber adapter, can fits to most type brake fitting.

Operational Example:

E-mail: chihtai@ms16.hinet.net

CH090937-A 9.5 Pneumatic/ Manual Operation Fluid Extractor PAT.

Description:

* Capacity: 9.5L (2.5 Gal.)

* Two air outlet with check valve design on handle for easy & quick to release air pressure from the extractor.

* Easy to operate suitable for engine oil, gear oil, brake fluid, coolant, water..etc.

* Provide with new decompression valve for easy to release the negative pressure.

* Fixing valve & safety cup for automatic cut-off extracting.

* Non-spark, no-power fluid extractor.

* Include 3kinds nylon tubes can be extracting any non-corrosive fluid.

* Include “A” 1.5 meter silicon hose with one touch controller & universal rubber adapter, can fits to most type brake fitting.

Operational Example:

E-mail: chihtai@ms16.hinet.net

CH090937-6 Manual Operation Fluid Extractor PAT.

Description:

* Capacity: 6.0L (1.6 Gal.)

* Two air outlet with check valve design on handle for easy & quick to release air pressure from the extractor.

* Easy to operate suitable for engine oil, gear oil, brake fluid, coolant, water..etc.

* Provide with new decompression valve for easy to release the negative pressure.

* Fixing valve & safety cup for automatic cut-off extracting.

* Non-spark, no-power fluid extractor.

* Include 3kinds nylon tubes can be extracting any non-corrosive fluid.

* Include “A” 1.5 meter silicon hose with one touch controller & universal rubber adapter, can fits to most type brake fitting.

Operational Example:

CHIH TAI Y&S CO., LTD.

CH090950-6

E-mail: chihtai@ms16.hinet.net

Pneumatic/ Manual Operation Fluid Extractor PAT.

Description:

* Capacity: 6.0L (1.6 Gal.)

* Two air outlet with check valve design on handle for easy & quick to release air pressure from the extractor.

* Easy to operate suitable for engine oil, gear oil, brake fluid, coolant, water..etc.

* Provide with new decompression valve for easy to release the negative pressure.

* Fixing valve & safety cup for automatic cut-off extracting.

* Non-spark, no-power fluid extractor.

* Include 3kinds nylon tubes can be extracting any non-corrosive fluid.

* Include “A” 1.5 meter silicon hose with one touch controller & universal rubber adapter, can fits to most type brake fitting.

Operational Example:

CHIH TAI Y&S CO., LTD.

CH090958 Manual Operation Fluid Extractor PAT.

Description:

* Capacity: 15L. (4 Gal.)

E-mail: chihtai@ms16.hinet.net

* Two air outlet with check valve design on handle for easy & quick to release air pressure from the extractor.

* Easy to operate suitable for engine oil, gear oil, brake fluid, coolant, water..etc.

* Provide with new decompression valve for easy to release the negative pressure.

* Fixing valve & safety cup for automatic cut-off extracting.

* Non-spark, no-power fluid extractor.

* Include 3kinds nylon tubes can be extracting any non-corrosive fluid.

* Option parts: “A” 1.5 meter silicon hose with one touch controller & universal rubber apdater, can fits to most type brake fitting.

CHIH TAI Y&S CO., LTD.

E-mail: chihtai@ms16.hinet.net

CH090958-A Pneumatic/ Manual Operation Fluid Extractor PAT.

Description:

* Capacity: 15L. (4 Gal.)

* Two air outlet with check valve design on handle for easy & quick to release air pressure from the extractor.

* Easy to operate suitable for engine oil, gear oil, brake fluid, coolant, water..etc.

* Provide with new decompression valve for easy to release the negative pressure.

* Fixing valve & safety cup for automatic cut-off extracting.

* Non-spark, no-power fluid extractor.

* Include 3kinds nylon tubes can be extracting any non-corrosive fluid.

* Option parts: “A” 1.5 meter silicon hose with one touch controller & universal rubber apdater, can fits to most type brake fitting.

Specification:

* Air inlet: 1/4”

*Avg. air cons.: 2cfm

*Working pressure range: 40-170psi (2.8-11.7bar / 0.28-1.17Mpa)

*Fluid temperature range: 1 degree-95 degree C (35-200 degree F)

Standard accessories:

B: 7.8 x 9.8 Nylon hose x 1M

C: 5.3 x 6.7 Nylon hose x 1M

D: 4 x 6 Nylon hose x 1M

CHIH TAI Y&S CO., LTD.

CH090903 5.5L Pneumatic Fluid Extractor PAT.

Description:

E-mail: chihtai@ms16.hinet.net

* Simple and easy to operate suitable for engine oil gear oil transmission and brake fluid water etc.

* Extract within 3 min. for 5.5L engine oil.

* Non-spark power oil extracting.

* One man, clear operation, quick and safety.

Specification:

* Air inlet: 1/4”.

*Avg. air cons: 2cfm.

* Working pressure: 40-170psi.

* Temperature range: -3degree F- 140 degree F.

* Max. capacity: 5500c.c.

CH090908

Basic Brake Oil Extractor PAT.

escription:

Economical-fast and easy, reduces labor costs.

Versatile-handles most standard and ABS brake systems. Clean-collects oil brake fluid with out spillage. Quiet-integrated silencer for a quieter, working environment. Silicon suction assembly with universal rubber fitting.

Specification:

Air inlet: 1/4”

Avg. air cons: 2cfm

Working pressure: 40-170psi

Temperature range: -3 degree F-140 degree F. Max. capacity: 2000c.c.

CH090908-K Basic Brake Bleed Kit PAT.

Description:

* Midget size N.W then less 1kg easy carry & operation.

* Pneumatic extractor non-spark.

* One man is same step operate

* 1 meter silicon hose with universal rubber adaptor, can fit most vehicle brake oil bleeder fitting.

* Fixing valve & safety cup for automatic cut-off extracting.

Specification:

* Air inlet: 1/4”

* Avg. air cons: 2cfm

* Working pressure: 40-170psi

* Temperature range: 3°F – 140°F

* Max capacity: 2000C.C

E-mail: chihtai@ms16.hinet.net

CH090908-2 Pneumatic Brake Bleeder

Description:

* Economical -fast and easy operation, reduces labor costs.

* Versatile -Handle most standard and ABS brake system.

* Clean -collects oil brake fluid without spillage.

* Quite -integrated silencer for a quieter working environment.

* Safety-pneumatic extractor non-spark.

* Suitability -1 meter silicone hose with universal rubber adapter brake fitting.

Specification:

* Air inlet: 1/4”

* Avg. air cons: 2cfm

* Working pressure: 40-170psi

* Temperature range: -3 degree F-140 degree F.

* Working capacity: 1800c.c.

CHIH TAI Y&S CO., LTD.

CH090914 Brake Bleeder (1000C.C)

Description:

CH090914-N Brake Bleeder (500C.C)

Description:

* Capacity: 500C.C

E-mail: chihtai@ms16.hinet.net

CH0909215 Pneumatic Brake Fluid Extractor

Feature:

* Simple way to extract the brake fluid.

* Economical - fast and easy, reduces labor costs.

* Versatile - handles most standard and abs brake systems.

* Clean - collects old brake fluid without spillage.

* Quiet - integrated silencer for a quieter. Working environment.

* 1 Meter silicone hose with universal rubber adapter, can fit most vehicle brake fluid bleeder fitting.

Specification:

• Air Inlet:1/4”

• AVG. Air cons 2 Cfm

• Working Pressure Range:40~120Psi

• Max. Capacity:1000CC

E-mail: chihtai@ms16.hinet.net

CH090905

Pneumatic Oil & Liquid Dispenser PAT.

Description:

* 6000cc 2in1 extract & pump dispenser.

* with 1M nylon hose extracting oil tank.

* 1.2M PU hose with super flexible rubber nozzle.

* Fixing valve & safety cup for automatic cut-off extract.

* Suitable for narrow & difficult space filling.

* Simple and easy to operate suitable extracting & filling and liquid.

Specification:

*Air inlet: 1/4”

*Avg. air cons: 2cfm

*Working pressure: 40-170psi

*Temperature range: -3 degree F – 140 degree F.

*Max. capacity: 6000c.c.

CH090905-N Two Way Pneumatic Oil & Liquid Dispenser PAT.

Description:

* Provide with the safety valve, pre-setting 43psi (3kg/cm2).The exceed pressure will be relief automatically.

* Provide with the gauge, can be read & control the air pressure in the tank more easily.

Specifications:

* Air inlet: 1/4”

* Avg. air cons.: 2cfm

* Temperature range: -3°F ~ 140°F

* Max. capacity: 6000cc

CH090918

Pneumatic Brake Oil Extractor PAT.

Description:

* Change your brake oil is a simple and easy operation if you have the right tools!

* One man is same step clear operation quick and safety!

Specification:

* Air inlet: 1/4”

* Avg. air cons: 2cfm

* Working pressure: 40-170psi

* Temperature range: -3 degree-140 degree F

* Max. capacity: 2000c.c.

E-mail: chihtai@ms16.hinet.net

CH090906 Pneumatic Brake Oil Extractor & Bleeder Kit PAT.

Description:

* Midget size N.W. then less 1kg easy carry & operation.

* Pneumatic extractor non-spark.

* One man in same step operate.

* 1 meter silicone hose with universal rubber adaptor, can fit most vehicle brake oil bleeder fitting.

* Fixing valve & safety cup for automatic cut-off extracting.

CH090903-N 8.5L Pneumatic Fluid Extractor

Description:

* Capacity 8.5L for extracting some kind new car engine oil.

* Pneumatic extractor non-spark.

* One man in same step operate.

* 1meter silicon hose with universal rubber adaptor, can fit most type brake fitting.

* Fixing valve & safety cup for automatic cut-off extracting.

* 21 century new patented products.

Specification:

* Air inlet: 1/4”

* Avg. air cons: 2cfm

* Working pressure: 40-170 psi

* Temperature range: -3°F – 140°F Max. capacity: 8500C.C

CHIH TAI Y&S CO., LTD.

CH090919

CH090920

E-mail: chihtai@ms16.hinet.net

Pneumatic Oil & Liquid Dispenser PAT. (2000C.C)

Description:

* 6000cc 2in1 extract & pump dispenser.

* with 1M nylon hose extracting oil tank.

* 1.2M PU hose with super flexible rubber nozzle.

* Fixing valve & safety cup for automatic cut-off extract.

* Suitable for narrow & difficult space filling.

* Simple and easy to operate suitable extracting & filling and liquid.

Pneumatic Oil & Liquid Dispenser PAT.

Description:

* 6000c.c. Pump dispenser.

* Suitable for narrow & difficult space filling.

* Simple and easy to operate filling and liquid.

Specification:

* Air inlet: 1/4”

* Av.g air cons: 2cfm

* working pressure: 40-170psi

* Temperature range: -3 degree F – 140 degree F.

CH090922 Non-Power Brake Oil Receiver

Description:

* Max. capacity: 1000C.C

* Operation example:

CHIH TAI Y&S CO., LTD.

CH090922-N

Non-Power Brake Oil Receiver

Description:

* Max. capacity: 1000C.C

* Operation example:

E-mail: chihtai@ms16.hinet.net

CH090922-H

Non-Power Brake Oil Receiver with Chain Hanger

Description:

* Max. capacity: 1000C.C

CH090938

Non-Power Brake Oil Receiver

Description:

* Max capacity: 1000C.C

* Silicon hose with universal rubber adaptor, can fit most vehicle brake oil bleeder fitting.

* Operation example:

CHIH TAI Y&S CO., LTD.

E-mail: chihtai@ms16.hinet.net

CH0909213 250CC Manual Bendable Fluid Refill & Extractor

Feature:

* Idea for smooth liquid transfer.

* High-quality hydraulic oil seals can keep air tight and prevent liquid leakage.

* The patented ergonomic design makes operation more easily.

* Provide 3 kinds of bendable tubes, suitable for extracting & replacing transmission fluid, power steering fluid, gear oil, brake fluid & antifreeze.

* The transparent body makes it possible to clearly see the flow of liquid during operation.

* A transparent tube cap is included to avoid leakage of residual fluid after operation.

CH0909212 Manual Brake Fluid Bleeder

Description:

*Manual operation suitable for most vehicle brake system.

*Provide a standard European adapter with a 90O fitting for narrow space.

*A variety of brake fluid connectors suitable for different vehicle types can be selected.

*Capacity 3000cc tank with pressure gauge, can be read & control the air pressure in the tank more easily.

*Built-in a pressure release valve on the filler cap.

*Include 2 M special industrial hose with control valve & connector.

*21 century new patented products.

*Change your brake fluid is a simple and easy operation if you have the right tool.

*One men in same step clear operate, non-spark, quick & safety.

CH170804

CH170803

2.5L Pneumatic Vacuum Brake Fluid Bleeder Set

Specification:

* Capacity 2.5 Liter * Vacuum type brake bleeder * For standard workshop air supply used * Removes fluid via bleed nipples to allow bleeding or entire fluid replacement * With 1pc 1.2 liter brake fluid supply bottle

Warning: * Do not use with volatility product (e.g. petro, diesel oil … etc). * Keep away from fire

Transmission Filling system W/8pcs Adapter Set

Description:

* Capacity: 7.5L * Outlet: 80cc/ cycle * Viscosity Range: up to SAE140 * Select Correct Adapter

Adapter Content: Parts No picture application

FORD 1/8 – 27 ( NPT)

Universal BMW, Honda, Nisan, etc

VW/Audi

VW/Audi, Porsche

VW/Audi, Mini cooper M10 x 1.0,

VW/Audi DSG M24 x 1.5,

VW/Audi CVT M22 x 1.5, 8 Mercedes M12 x 1.5,

CH170803-2

CH170803-3

E-mail: chihtai@ms16.hinet.net

Transmission Filling system W/13pcs Adapter Set

Description:

* Capacity: 7.5L

* Outlet: 80cc/ cycle

* Viscosity Range: up to SAE140

* Select Correct Adapter

Adapter Content:

Parts No picture application 1

FORD 1/8 – 27 ( NPT) 2

Universal BMW, Honda, Nisan, etc 3

VW/Audi 4

VW/Audi, Porsche 5

VW/Audi, Mini cooper M10 x 1.0, 6

VW/Audi DSG M24 x 1.5, 7 VW/Audi CVT M22 x 1.5, 8 Mercedes M12 x 1.5, 9 Skoda M18 x 1.5 10

Audi/VW, Skoda M30 x1.5 11

Universal Flexible 300mm, 12 Volvo 5/16 – 24 (UNF) 13 Toyota, Lexus M18 x 1.5

Transmission Filling system W/15pcs Adapter Set

Description:

* Capacity: 7.5L

* Viscosity Range: up to SAE140

Adapter Content:

* Outlet: 80cc/ cycle

* Select Correct Adapter

Parts No picture application 1

FORD 1/8 – 27 ( NPT) 2

Universal BMW, Honda, Nisan, etc 3

VW/Audi 4

VW/Audi, Porsche 5

VW/Audi, Mini cooper M10 x 1.0, 6

VW/Audi DSG M24 x 1.5, 7 VW/Audi CVT M22 x 1.5, 8 Mercedes M12 x 1.5, 9 Skoda M18 x 1.5 10

Audi/VW, Skoda M30 x1.5 11

Universal Flexible 300mm, 12 Volvo 5/16 – 24 (UNF) 13 Toyota, Lexus M18 x 1.5 14

Nissan, Infinity M8 x 1.0 15

ATF-Adapter V.W Passat

CH170803-4

Transmission Filling system W/17pcs Adapter Set

Description:

* Capacity: 7.5L

* Viscosity Range: up to SAE140

Adapter Content:

* Outlet: 80cc/ cycle

* Select Correct Adapter

Parts No picture application 1

FORD 1/8 – 27 ( NPT)

Universal BMW, Honda, Nisan, etc

VW/Audi

VW/Audi, Porsche

VW/Audi, Mini cooper M10 x 1.0,

VW/Audi DSG M24 x 1.5,

VW/Audi CVT M22 x 1.5,

Mercedes M12 x 1.5,

Skoda M18 x 1.5

Audi/VW, Skoda M30 x1.5

Universal Flexible 300mm,

Volvo 5/16 – 24 (UNF)

Toyota, Lexus M18 x 1.5

Nissan, Infinity M8 x 1.0

ATF-Adapter V.W Passat

CH090948

Air Storage with 3 in 1 Inflator

Description:

* Capacity:10L

* Max. working pressure:9.9 Bar. (0.99mPa) .

* Inlet set equipped with adjustable air regulator controls the pressure.

* Safety valve installed on the flow route for easy operation .

* International organization certified tank (CE,UM.CRN)

* 3-IN-1 Inflator equipped with an interchangable automobile and truck chuck.

* Portable design easy to move around and self inflated tank design for space and time saving.

* A special designed gauge on the hand grip easily detects the tank pressure.

CH031201-45G

Air Operated Grease Pump

Description:

* Air Operated Grease Pump uses air as power to suck grease into lubrication point. It is suitable for using with machines, automobiles, and vessels, etc. It is a very useful tool for lubrication and maintenance.

* Lubricant: Suitable for 00#~2# grease. Operating in cold area or higher viscosity grease, suggest using with follower plate.

Specification:

* Capacity: 30L

* Air input pressure: 4~9kg/cm2

* Pressure ratio: 45:1

* Grease output pressure: 180~405kg/cm2

* Deliver rate: 30cc/sec.

* Hose length: 10ft

* N.W.: 18.5kgs

CH031201-55G

Air Operated Grease Pump

Description:

* Air Operated Grease Pump uses air as power to suck grease into lubrication point. It is suitable for using with machines, automobiles, and vessels, etc. It is a very useful tool for lubrication and maintenance.

* Lubricant: Suitable for 00#~2# grease. Operating in cold area or higher viscosity grease, suggest using with follower plate.

Specification:

* Capacity: 30L

* Air input pressure: 4~9kg/cm2

* Pressure ratio: 45:1

* Grease output pressure: 180~405kg/cm2

* Deliver rate: 30cc/sec.

* Hose length: 10ft * N.W.: 21kgs

CH031201-65G

Air Operated Grease Pump

Description:

* Air Operated Grease Pump uses air as power to suck grease into lubrication point. It is suitable for using with machines, automobiles, and vessels, etc. It is a very useful tool for lubrication and maintenance.

* Lubricant: Suitable for 00#~2# grease. Operating in cold area or higher viscosity grease, suggest using with follower plate.

Specification:

* Capacity: 20L

* Air input pressure: 4~9kg/cm2

* Pressure ratio: 45:1

* Grease output pressure: 180~405kg/cm2

* Deliver rate: 30cc/sec.

* Hose length: 10ft

* N.W.: 20.9kgs

CH031202-O

Hand Operated Oil Pump

Description:

* Hand pushing type: quick easy and convenient for movement.

* Light and portable type: operate manually；No electricity is needed.

* Suitable for all sorts of machinery, vehicles, airplanes, ships, etc. the efficient instrument for infusing grease powerfully for lubrication & maintenance purpose.

* The barrel is Japanese type and is with high class design. The base is equipped with foot-stepping stand. The operation will be even better with foot stepped on it.

Oil usage:

* Suitable for lubricant oil, gear oil or general non-corrosive solvent, all can be infused into smoothly.

Specification:

* Capacity: 20L

* Deliver rate: 65cc/sec.

* Hose length: 6.5ft

* N.W.: 7kgs

CH031202-G

Hand Operated Grease Pump

Description:

* Hand pushing type: quick easy to get moved.

* Grease packed in bulk of 20L can be poured inside.

* Quite portable to be operated manually；No electricity is needed herein.

* Suitable for all sorts of machineries, vehicles, airplanes, ships, etc. The efficient instrument with which grease can be infused powerfully for lubrication & maintenance purpose.

* The barrel is Japanese type and is with high class design. The base is equipped with foot-stepping stand. The operation will be even better with foot stepped on it.

Specification:

* Capacity: 20L

* Deliver rate: 4cc/ each cycle.

* Hose length: 6ft

* N.W.: 7kgs

CH031203-40 Waste Oil Reservoir

Feature:

CH090907

E-mail: chihtai@ms16.hinet.net

* Suitable for vehicles with oil bottom outlet design.

* Oil collecting and discharging: to be run just by one operator.

* Suitable for the usage of motorcycle lifter. Funnel can ascend and descend at will.

* To discharge oil by air pressure, pressure can be saved for oil discharging at wherever workplace it might be.

* With such device of air intake safety valve, when the pressure is too high, it will release pressure automatically.

* The barrel body and hopper are designed with high grade steel plate. It came to become durable and lasting even more after being made manually.

* Hopper is designed with steel, the contaminated oil won’t come out. No such troubles of deteriorating, tending to be fragile, and deforming which plastic-made hoppers have.

Specification:

* Capacity: 40L (Other option: 60L or 80L)

* Air input pressure: 4~9 bar (60~130psi)

* Dimension: 480x540x880~1100mm

* Hose Length: 5ft

Waste Oil Treating Machine

Description:

* Oil discharge: pneumatic.

* Container capacity: 60L or 80L

* Max. height: 110cm

* Extension max. height: 155cm

CH1208101

Brake Fluid Exchange Machine

Description:

Gauge reading: 0-7 bar / 0-100psi

Max. working pressure:3.5 bar / 50.7psi

Unique 100% transparent and brake fluid resistant 2L tank allows users to see the remaining brake fluid volume Design with a forced drain function.

* Pulsating pattern helps clean the debris from the brake system

CH090917-A

E-mail: chihtai@ms16.hinet.net

Pneumatic High Flow Oil & Liquid Dispenser PAT.

Description:

* Working pressure: 90psi.

* 50 Gal. (CPC circluation oil R68) extracting or filling only need 6 minutes!

* Ideal for 50 Gal. pneumatic pump dispenser.

* Simple and easy to operate filling & extracting for non-corrosive liquids.

* Pneumatic operational non-spark.

* Safety cup for automatic cut-off extracting.

* Extension pipe suitable for narrow, deep & difficult space extracting or filling.

Specifications:

* Air Inlet: 1/4”

* Avg. air cons.: 2.5cfm

* Working pressure: 30-90psi

Operation:

CH090917-N

Pneumatic Piston Oil & Liquid Pump PAT.

Description:

* Working pressure: 90psi.

* 50 Gal. (Circluation oil R68) Filling only need 25 minutes!

* Ideal for 50 Gal. pneumatic pump dispenser.

* Simple and easy to operate filling non-corrosive liquid.

* Pneumatic operational non-spark.

* Piston design for low noise and stable operate.

* Provide with the check valve can be control the fluid to filling steady.

CHIH TAI Y&S CO., LTD.

CH0909187

Gear Type Pneumatic Oil & Liquid Dispenser

Description:

* Special for 50Gal. Ad-Blue

E-mail: chihtai@ms16.hinet.net

* Simple and easy to operation filling non-corrosive liquid

* Pneumatic operational non-spark

* Gear pump design for stable operate

Specification:

* Air Inlet: 1/4”

* Avg. air cons: 1.5~3.5CFM

* Working pressure: 40~90Psi

* Hose: 3/8”ID x 2M

* Oil No.: 0-120

Option gun:

LED Working Light

CH090803-10 10W LED Work Light

Description:

* AC/DC Dual purpose

* Power input: AC100~240V, DC12V

* Power output: DC3.6V

* LED q’ty: 10W Multi-Chip Module

* Housing material: Plastic housing

* Size(LxWxH)mm: 330x95x100

* Battery: 3.6V 3300mAh NI-MH

* Charge time: 5.0hours

* Active time: 4~4.5hours/LED

* N.W./pc: 0.8kg

CH090825 Angle Adjustable 5W CREE LED Working Light -AC/DC Rechargeable Battery

Description:

* LED quantity: 5W CREE LED x1pc with 1W LED x 1pc (or change to U.V x 1pc)

* LI-ION rechargeable battery: 3.6V 2200mAH.

* Charger input: AC100 ~ 240V 50/60Hz DC12V~24V

* Power output: 5.0V 1000mAH.

* Charger time: 3.5 ~ 4.0 hours.

* Active time: 3~4 hours

* Storage temperature: -20ºC to 70ºC.

* Operation temperature: -5ºC to 50ºC.

* LED sector: 170º

* At 50 cm: 350 LUX (750 LM)

* Waterproof grade: IP65

Usage:

Push button switch:

* Press switch button once: 1pc of 5W CREE LED light with half power turn on.

* Press switch button twice: 1pc of 5W CREE LED light with full power turn on.

* Press switch button three times: top light turn on.

* Press switch button four times: all light off.

During charging, red light (recharge light) on, after fully charged red light off.

Caution:

* First time use, please fully charge for 3~4 hour.

* When the light weak, please turn off the power before charging.

* Please fully charge before long period storage.

* Please keep away from fire.

CHIH TAI Y&S CO., LTD.

E-mail: chihtai@ms16.hinet.net

CH090826 Angle Adjustable 10W Chip LED Working Light-AC/DC Rechargeable Battery

Specification:

* LED quantity: 10W chip LED x 1 with top light 3W LED x 1 (or change to U.V x1)

* LI-ION rechargeable battery: 3.6V 2250mAH.

* Charger input: AC100 ~ 240V 50/60Hz DC12V~24V

* Power output: 5.0V 1000mAH.

* Charger time: 3.5 ~ 4.0 hours.

* Active time: 2.5hours

* Storage temperature: -20ºC to 70ºC.

* Operation temperature: -5ºC to 50ºC.

* LED sector: 170º

* At 50 cm: 350 LUX (750 LM)

* Waterproof grade: IP65

Usage:

Push button switch:

* Press switch button once: 1pc of 10W chip LED light turn on.

* Press switch button twice: 10W chip LED light off.

* Press switch button three times: top light turn on.

* Press switch button four times: all light off.

During charging, red light (recharge light) on, after fully charged red light off.

Caution:

* First time use, please fully charge for 3~4 hour.

* When the light weak, please turn off the power before charging.

* Please fully charge before long period storage.

* Please keep away from fire.

CHIH TAI Y&S CO., LTD.

E-mail: chihtai@ms16.hinet.net

CH090827 Angle Adjustable 9W High Power LED Working Light-AC/DC Rechargeable Battery

Specification:

* LED quantity: 3W LED x3pcs with top light 3W LED x 1 (or change to U.V x1)

* LI-ION rechargeable battery: 3.6V 2250mAH.

* Charger input: AC100 ~ 240V 50/60Hz DC12V~24V

* Power output: 5.0V 1000mAH.

* Charger time: 3.5 ~ 4.0 hours.

* Active time: 3.0hours

* Storage temperature: -20ºC to 70ºC.

* Operation temperature: -5ºC to 50ºC.

* LED sector: 25º

* At 50 cm: 4000 LUX

* Waterproof grade: IP65

Usage:

Push button switch:

* Press switch button once: 3pc of 3W LED light turn on.

* Press switch button twice: 3pcs of 3W LED light with half power turn on.

* Press switch button three times: top light turn on.

* Press switch button four times: all light off.

During charging, red light (recharge light) on, after fully charged red light off.

Caution:

* First time use, please fully charge for 3~4 hour.

* When the light weak, please turn off the power before charging.

* Please fully charge before long period storage.

* Please keep away from fire.

CHIH TAI Y&S CO., LTD.

E-mail: chihtai@ms16.hinet.net

CH090828 Angle Adjustable 30PCS LED Working Light-AC/DC Rechargeable Battery

Specification:

* LED quantity: 30pcs of LED with top light 3W LED x1 (or change to U.V x 1)

* LI-ION rechargeable battery: 3.6V 2250mAH.

* Charger input: AC100 ~ 240V 50/60Hz DC12V~24V

* Power output: 5.0V 1000mAH.

* Charger time: 3.5 ~ 4.0 hours.

* Active time: 4~5 hours

* Storage temperature: -20ºC to 70ºC.

* Operation temperature: -5ºC to 50ºC.

* LED sector: 15º

* At 50 cm: 2250 LUX

* Waterproof grade: IP65

Usage:

Push button switch:

* Press switch button once: 30pc of LED light turn on.

* Press switch button twice: 30pcs of LED light turn off.

* Press switch button three times: top light turn on.

* Press switch button four times: all light off.

During charging, red light (recharge light) on, after fully charged red light off.

Caution:

1. First time use, please fully charge for 3~4 hour.

2. When the light weak, please turn off the power before charging.

3. Please fully charge before long period storage.

4. Please keep away from fire.

CHIH TAI Y&S CO., LTD.

E-mail: chihtai@ms16.hinet.net

CH090830 Angle Adjustable 6W LED Working & Warning Light-AC/DC Rechargeable Battery

Specification:

* LED quantity: Red LED x13pcs + 5050 SMD x16pcs with top light 3W LED x 1pc (or change to U.V x 1pc)

* LI-ION rechargeable battery: 3.6V 2250mAH.

* Charger input: AC100 ~ 240V 50/60Hz DC12V~24V

* Power output: 5.0V 1000mAH.

* Charger time: 3.5 ~ 4.0 hours.

* Active time: 3.0 hours

* Storage temperature: -20ºC to 70ºC.

* Operation temperature: -5ºC to 50ºC.

* LED sector: 120º

* At 50 cm: 360 LUX

* Waterproof grade: IP65

Usage:

Push button switch:

* Press switch button once: 16pcs of LED light turn on.

* Press switch button twice: top light turn on.

* Press switch button three times: 13pcs red warning turn on.

* Press switch button four times: all light off.

During charging, red light (recharge light) on, after fully charged red light off.

Caution:

* First time use, please fully charge for 3~4 hour.

* When the light weak, please turn off the power before charging.

* Please fully charge before long period storage.

* Please keep away from fire.

CHIH TAI Y&S CO., LTD.

CH090850 8W COB LED Working Light- Adjustable Angle

Specification:

E-mail: chihtai@ms16.hinet.net

* LED quantity: 8W LED x1pc with tip LED light x1pc (or change to U.V LED light x1pc)

* LI-ION rechargeable battery: 3.6V 2350mAH.

* Charger input: AC100 ~ 240V 50/60Hz ／DC12V~24V

* Power output: 5.0V 1000mAH.

* Charger time: 3.5 ~ 4.0 hours.

* Active time: 3.0 hours

* Storage temperature: -20℃to 70℃

*Operation temperature: -5℃ to 50℃

* LED sector: 120 degree

* At 50 cm: 500 LUX

* Waterproof grade: IP65

Usage:

1. Push button switch:

* First section: 2W LED light turn on.

* Second section: 8W LED light turn on.

* Third section: Top light turn on.

* Fourth section: All lights turn off.

2. During charging, red light (recharge light) on, after fully charged red light off.

Caution:

* First time use, please fully charge for 3~4 hour.

* When the light weak, please turn off the power before charging.

* Please fully charge before long period storage.

* Please keep away from fire.

E-mail: chihtai@ms16.hinet.net

CH090834 LED Penlight

Specification:

* 8W Clip on Board

* AAA 1.5V battery x 3pcs

* Max. Illumination 450LUX/50cm Min.

* Storage temperature: -20 to 70℃

* Operation temperature: -5 to 50℃

* LED section: 120 degree

* L x W x H = 165 x 25 x 30mm

* Weight: 65g (including battery)

Usage:

* Push button switch: on/off

* 360 degree swivel clip with molded magnet for convenience usage.

* High strength magnet

Caution:

* First time use, please open the battery wrap to insert its direction correctly.

* When the light weak, please change to use new batteries.

CH090847 3W LED Penlight

Features:

* 3W 6pcs x 0.5W SMD LED white

* 300Lux/50cm Min.

* AAA 1.5V battery x 3

* Storage temperature: -20 to 70℃

* Operation temperature: -5 to 50℃

* LED section: 120 degree

* L x W x H = 165 x 25 x 30mm

* Weight: 65g (including battery)

Usage:

* Push button switch: on/off

* 360 degree swivel clip with molded magnet for convenience usage.

Caution:

* First time use, please open the battery wrap to insert its direction correctly.

* When the light weak, please change to use new batteries.

CHIH TAI Y&S CO., LTD.

CH090834-C

E-mail: chihtai@ms16.hinet.net

Rechargeable 8W COB LED Working Pencil Light

Features:

* Micro adjustment lumen switch

* Twin magnet on rear and bottom

* Comes with belt clip

* Build in 2200mAh Li-Ion battery

– New Design!

* For full light-approx 4 hours working hours

* For semi light-approx 12 working hours

* 3.5~4 hours charging time:

-In charging: red indicator light on, -charged completed: blue indicator light on

* Comes with 5V 1A USB charger & USB cable

Specifications:

* LED Max. power: 8W LED COB light

* Li-ion rechargeable battery: 3.7V 2200mAh

* Charger input: AC100-240V, 50/60Hz

* Power output: 5.0V 1000mAh

* Active time: 4 hours

* Storage temperature: -20 to 70℃

* Operation temperature: -5 to 50℃

* Product size: L215 xW27 x H30 mm

Twin magnet on rear and bottom

E-mail: chihtai@ms16.hinet.net

CH090849 8W Working Light with Magnet Base

Description:

* Thin light, only 13mm thickness

* Aluminum alloy steel

* Two stage light

* W/ magnet base

* 186650 Lithium battery

CH090811

Flexible Table Lamps LED COB Slim Light

Instruction :

* Lumen switch – 1stly turn right / left for on / off, then turn the switch slightly right or left for necessary light.

* 18650 Li-ion 3.6V Rechargeable Battery.

* Charging Battery – use charger and cord connected to the charging port and then plug into socket for re-charging.

* LED charging indicator: -Red light on: in charging -Green light on : completely charged

Caution :

* Do not turn on the lumen switch when charging battery

* Always unplug after battery completely charged.

* Do not disassemble the built-in battery.

* Keep the LED light away from fire / water or heat / damp place

* Do not immerse the LED light in water / solvent

* Do not shine the LED light directly on anybody’s eyes.

E-mail: chihtai@ms16.hinet.net

CH090832 5W Portable Working Light with Magnet Base

Description:

* AC & DC 2 modes rechargeable Zoom flashlight

* Users friendly interface for infinitely adjustable levels of focus, to adjust loosen head makes focus ramp up or down, tighten to set at desired focus level.

* Wide bean is ideal for light the path, intense spot penetrates deep into the darkness.

Specification:

* Maximum brightness: Wide beam 360 Lux at 50cm, Intense spot 10000 lux at 50cm

Note: wide beam diameter: 158cm/ intense spot diameter:13cm

* Battery: 1 pc x Lithium battery ICR Sanyo 18650A 2250mA /3.7V

* Running time: high light 2.5~3.0hours, low light 8~9hours

* Recharge time: 3.5 hours

* Four gears: high lighting-low-lighting-flash(SOS) Lighting and off four modes can switch back and forth

* Head adjustment: tilts 180 degrees.

* Material: aluminum alloy (Eco-friendly)

* Dimensions: overall length 168mm,head dia.:28mm, body dia.:37mm

* Waterproof grade: IP65

* LED lift time: 50,000 hours

* Charge cycles: over 500 times

* Lighting range: Max. 150M

* Charger:

AC adapter input:110-240V,50-60Hz；outpu:5V,1000mA car adapter input: DC 12-24V；output: 5V,1000mA

* Included: 5W zoom LED torch, rechargeable Li-ion batteries, 110V AC and 12V DC battery charger, instructions, leather cover (optional)

* Weight:580G (cover +2 chargers + box)

CHIH TAI Y&S CO., LTD.

E-mail: chihtai@ms16.hinet.net

CH090831 Rechargeable 5W Working Snake Light – New Design!

Description:

* Micro adjustment lumen switch

* Focus adjustable

* Foldable base with powerful magnet

* 18650 Li-Ion 3.6V rechargeable battery

* Charging battery: use USB charger and USB cord connected to the USB charging port and then plug into socket for re-charging.

* LED charging indicator:

-In charging: red indicator flash -charged completed: blue indicator light on

* Product size: L385 x W40 x H30 mm

Specification:

* LED Max. power: 284 Lumens 5W CREE LED

* Power output: 5.0V 1000mAh

* Charger time: 3.5~4.0 hours.

* Active time: 5.5 hours

* Storage temperature: -20 to 70℃

* Operation temperature: -5 to 50℃

* Charger input: AC100-240V, 50/60Hz

Caution:

* Keep the LED light away from fire/water or heat/damp place

* Do not immerse the LED light in water/solvent.

* Do not shine the LED light directly on anybody’s eyes.

* Do not disassemble the built-in battery.

E-mail: chihtai@ms16.hinet.net

CH090843-S Rechargeable 8W COB LED Working Snake Light – New Design!

Description:

* 18650 Li-Ion 3.6V rechargeable battery

* Charging battery: use USB charger and USB cord connected to the USB charging port and then plug into socket for re-charging.

* LED charging indicator:

-In charging: red indicator flash -charged completed: blue indicator light on

* Product size: L445 x W40 x H30 mm

Specification:

* LED Max. power: 263 Lumens 8W COB LED

* Power output: 5.0V 1000mAh

* Charger time: 3.5~4.0 hours.

* Active time: 5.5 hours

* Storage temperature: -20 to 70℃

* Operation temperature: -5 to 50℃

* Charger input: AC100-240V, 50/60Hz

Caution:

* Keep the LED light away from fire/water or heat/damp place

* Do not immerse the LED light in water/solvent.

* Do not shine the LED light directly on anybody’s eyes.

* Do not disassemble the built-in battery.

CH090843 15W COB LED Working Slim Light

Description:

* Micro adjustment lumen switch

* Foldable base with powerful magnet

* Swivel hanging hook

* Build in 2200mAh Li-Ion battery

* For full light-approx 2.5 hours working hours

* For semi light-approx 10 working hours

* 4 hours charging time:

-In charging: red indicator flash

-charged completed, blue indicator light on low battery, yellow indicator flash

* Comes with 5V 1A USB charger &USB cable

Specification:

* LED Max. power: 15W LED COB light

* Li-ion rechargeable battery: 3.7V 2200mAh

* Charger input: 5.0V 1000mAh

* Charger time: 3.5-4.0 hours

* Active time: 2.5 hours

* Storage temperature: -20℃ to 70℃

* Operation temperature: -5℃ to 50℃

* Product size: L375 x W40 x H30 mm

CH090852 2 In 1 Focus Adjustable Flashlight

Description:

* Lumen Switch: Turn for on/off, then turn the switch slightly right or left for necessary light.

* 18650 Li-ion 3.6V rechargeable battery.

* Charging battery-use USB charger and USB cord connected to the USB charging port and then plug into socket for re-charging.

* Focus adjustable.

* LED charging indicator: red light-in charging , blue lightcompletely charging.

* Product size: 230(L) x 30(W) x 40(H) mm

* Weight: 145g

CH090853-1

LED COB Slim Working Light

Description:

* Lumen switch: Turn for on/off, then turn the switch slightly right or left for necessary light.

* Built in 3350mAh Li-ion battery capacity.

* Charging battery-use USB charger and USB cord connected to the USB charging port and then plug into socket for re-charging.

* Aside functional switch available.

* LED charging indicator: red light-in charging , blue lightcompletely charging.

* LED max. power: 880 lumens(white light).

* Product size: 477(L) x 50(W) x 40(H) mm

* Weight: 295g

CH090853-2

LED COB Slim Working Light

Description:

* Lumen switch: Turn for on/off, then turn the switch slightly right or left for necessary light.

* Built in 3350mAh Li-ion battery capacity.

* Charging battery-use USB charger and USB cord connected to the USB charging port and then plug into socket for re-charging.

* Aside functional switch available.

* LED charging indicator: red light-in charging , blue lightcompletely charging.

* LED max. power: 620 lumens(white light), 600 lumens(yellow light), mix. 770 lumens (mix. light).

* Product size: 477(L) x 50(W) x 40(H) mm

* Weight: 295g

CH090853-3

LED COB Slim Working Light

Description:

* Lumen switch: Turn for on/off, then turn the switch slightly right or left for necessary light.

* Built in 3350mAh Li-ion battery capacity.

* Charging battery-use USB charger and USB cord connected to the USB charging port and then plug into socket for re-charging.

* Aside functional switch available.

* LED charging indicator: red light-in charging , blue lightcompletely charging.

* LED max. power: 620 lumens.

* Product size: 477(L) x 50(W) x 40(H) mm

* Weight: 295g

Specifications:

A. LED : 8W COB (Chip on Board.) LED.

B. Battery: 3 X AAA Super Heavy Duty 1.5V dry batteries last up to 8 hours of non-stop use(included).

C. Max Illumination: 236 Lumen.

D. Storage temperature: -20℃ to 70℃.

E. Operation temperature: -5℃ to 50℃.

F. LED Section: 120°.

G. Waterproof: IP 64.

Usage:

* Dimmer Lumen Switch.

* 360° Swivel Clip with molded magnet for convenience to use.

* High Strength Magnet.

Cautions:

a. For first time to use, please open the battery wrap to insert its direction correctly.

b. When the light weak, please change to use new batteries. CH101301

Description:

*Overall Length: 165mm

*Illumination (Brightness): 18000-20000 MCD

* Packing: pouch

CH090865 3 In 1 Multi-Functional LED Light Set –New Design!

Description:

* This LED set contain three lights (flashlight, super bright light and UV light) in one set.

* Simply replace the light heads to become the multi-function working light.

* With NICHIA 600 Lumen

Universal Puller

CH121442

Universal Puller Set

Description:

* 1pc beam 2-arm

* 1pc beam 3-arm

* 9pcs pulling legs

* 1pc spindle

CH121447-B

Universal Puller Set

CH121447-BS

Universal

Description:

* 3-arm puller

* With pulling legs for narrow spaces in different lengths.

* Particularly well suited to be hung up on workshop walls.

* All required clamping depths available at any time.

Puller Set

Description:

* 3-arm puller

* With pulling legs for narrow spaces in different lengths.

* Particularly well suited to be hung up on workshop walls.

* All required clamping depths available at any time.

CH121447-B13

Universal Puller Set

CH121449 Puller Sets

Description:

* 3-arm puller

* With pulling legs for narrow spaces in different lengths.

* Particularly well suited to be hung up on workshop walls.

* All required clamping depths available at any time.

Description:

* 1 Pulling Unit, Mechanical: 130mm, ↨ 110mm.

* 1 Pair Extensions, length 100mm.

* 1 Separator with pressure beam: Opening 12 - 75 mm.

CH121425

Universal Pulley Puller Set

Description:

* For pulling and installing of belt pulleys at power steering pumps, generators, fan wheels, etc.

* 2 cross beams: 140 mm and 230 mm long.

* 2 pairs of straight pullers: length 60 mm and 110 mm.

* 1 pair of specifically formed pullers: length 60 mm.

* All pullers and cross beams can be combined

CH121444

Light Engineering Puller Kit

Description:

* Enables removal of bearings where normal pullers are unable to be used by locking into the bearing race itself.

Contents:

* 1 x Puller yoke with centre screw and twin arms.

* 2 x Threaded leg extensions.

* 2 x 9mm ball ended threaded puller adapter.

* 2 x 11mm ball ended threaded puller adapter.

* 2 x 12.5mm ball ended threaded puller adapter.

CH121445

General Engineering Puller Kit

CH121443 Micro-Engineering

Description:

* 6 pairs of tips 16 - 19 - 22 - 25 - 28 - 32 mm, Spread Ø70 to Ø190 mm.

Puller Kit

Description:

* Enables removal of bearings where normal pullers are unable to be used by locking into the bearing race itself.

Contents:

* 1 x Puller yoke with centre screw and twin arms.

* 2 x Threaded leg extensions.

* 1 x Centre screw thread cap.

* 2 x 5.5mm ball ended threaded puller adapter.

* 2 x 6.0mm ball ended threaded puller adapter. * 2 x 8.0mm ball ended threaded puller adapter.

CH1214112-A

Description:

* This product is suitable for solving tools wantonly and bendly of the following size * Diameter：Ø 25mm~50mm * Height：Max 40m&70mm

Wiper Arm Puller

Description:

* Adjustable, compact and light easy to use: prevents damaging wiper arm.

* Cross-piece special for wiper featuring a nozzle.

CH121413-A

Spreader Tool(German Utility Model)

Description:

* Suitable for VW-Audi, BMW, Citroën, Ford, Seat, Škoda, Renault, Peugeot, Japanese vehicles etc.

CH121413-B

Spreader Tool (German Utility Model)

Description:

* Suitable for strut clamping bores on (for example): VW Golf V, Passat; Audi; BMW; Citroën; Ford; Seat; Škoda; Renault; Peugeot; Japanese vehicles etc.

* So that the spring/shock absorber unit can be pulled out of the bore in the steering knuckle even if it is a tight fit, it is essential to open out the clamping bore with spreader tool CH121413-B

* After this, the shock absorber unit can be removed or installed without difficulty, without risk of damaging the (cast iron or aluminum) steering knuckle.

* Due to the variably reloadable spreading head it is especially suitable for vehicles whose fastening slot is out of centre such as VW-Audi, Ford etc.

* Due to its dimensions and special form the replaceable wedge of the spreading head is particularly suitable for aluminum knuckles.

* The wedge is provided with an end stop to avoid excessive knuckle widening.

* Other wedges are available as accessories (e.g. for steel knuckles).

* Fully floating bolts avoid the tool canting during knuckle widening.

CH121416-A0910

Wiper Arm Puller 2-arm

Description:

* With Special-Krallex-Legs

* With integrated Leg-Clamp

* Its special shape, the two different hook couples (with extra thin straight tips and rounded tips) and the adjusting nut make this puller almost universal in its range of application.

* Application on Audi, BMW, Chevrol/Daewoo, Chrysler-Jeep, Citroen, Fiat, Ford, Honda, Hyundai, KIA, Land Rover, Mazda, MG-Rover, Nissan, Peugeot, Porsche, VW, MAN, MB, Scania.

* Patent：Europe, U.S.A, Taiwan.

E-mail: chihtai@ms16.hinet.net

CH1214244-2A,2B,2C,2D,2E,2F,2G Standard Pullers 2-Arm

Description:

* Pulling legs drop forged in one piece therefore guaranteed notbending even by extremely hard work.

* The double profile beam strengthened by trapeze design provide ample power.

* Range of use extended by bolt holders which are pushed on beam instead of legs.

* For swift and safe removal of wheels of any description, gears, races, ball bearings, pulleys etc.

CH1214250-B,-C,-D,-E,-F,-G,-H,-I Universal Puller 2-arm

Description: Item No.

CH1214250-B 25-80 100 70-130 CH1214250-C 25-130 100 80-180 CH1214250-D 50-160 150 105-220 CH1214250-E 60-200 150 120-270 CH1214250-F 80-250 200 160-330 CH1214250-G 80-350 200 160-420 CH1214250-H 110-520 200 195-600 CH1214250-I 170-640 225 260-715

CH1214246-A, -B,-C Outside Pullers

Description: Item No. C min-max P(mm) T(kn)

CH1214246-A 12-140 145 3 CH1214246-B 20-180 190 4 CH1214246-C 30-280 250 4

E-mail: chihtai@ms16.hinet.net

Scraper /Hook/Pick-Up Tool/ Filer

CH130859

Razor Scraper

Description:

* Offset scraping head and short handle are great for tight scraping jobs.

* Overall length: 4”.

Material:

* Handle: PVC Coating

* Knife: K5

CH130859-A Razor Scraper

Description:

* Offset scraping head and short handle are great for tight scraping jobs.

CH1308323-C

Extended Razor Scraper

Description:

* The sharp, hardened steel blades can remove carbon, old gasket material, sludge and other hard-to-clean substances.

* The set includes 3 blades.

CH130849-11

Extended Razor Scraper

Description:

* Long handled razor scraper. Suitable for scraping gaskets and also for removing labels, stickers and overspray from car windows

* Safe storage of spare blades in handle. Supplied with three razor and three plastic blades

* Material: -Handle: PVC -Knife: K5

CH130849-A

Extended Razor Scraper

Description:

* Sharp, hardened steel blades can remove carbon, old gasket material, sludge, and other hard-to-clean substances

* The set includes 3 blades.

* Material: -Handle: PVC -Knife: K5

Description: * To use the caulk getter, place the blade in the gasket and pull it toward you. * The blade is sharpened on the end and on both sides so it will clean glass and old sealant out of the gasket with one easy pulling motion

Description: * 1PC: 7/8" Long-Blade scraper 12"(305mm)

1PC:1/2" carbon scraper 12" (305mm)

1PC:3/4" blade scraper 12" (305mm)

1PC:7/8" short-blade scraper 8" (203mm)

1PC:1/4" scraper 12" (305mm)

Description: * 1PC : Short-Blade scraper 8" (203mm)

1PC: 1/2" carbon scraper 12" (305mm)

1PC: Long-Blade scraper 12" (305mm)

1PC: Cotter key puller 9" (229mm)

1PC: 90∘Large puller(229mm)

E-mail: chihtai@ms16.hinet.net

CH1308335

5Pcs Scraper And Remover Set

Description:

* Suitable for variety of application including removing, Cotter pins, radiator hoses, flaking paint and gaskets

* Packing: Display Window Box 24sets/ 17.3kgs/ 18.3kgs/ 1.7’

Content:

CH1308276

Material:

* Handle: PP

* Blade: Carbon Steel

O-Ring & Rubber Removal Tools

Description:

* Suitable for a number of applications including the fitting and removal of O-rings/ seals/ bushes/ springs/ cotter pins/ fuses.

CH1308324

Gasket Scraper Set

Description:

* For cleaning cylinder heads, removing old sealants carbon build up. Hardened, tempered carbon steel shanks and heads are ‘offset to edge’ to allow scraping of flat surfaces easily with chrome finish for protection against corrosion. Simple ‘firmer’ style beveled points with longer head lengths for scrapers to be re-ground several times for maximum service life.

* Size: 1” x 11”,3/4” x 11”, 1-1/2” x 11”

* Material: -Handle: PP -Blade: Carbon Steel

CHIH TAI Y&S CO., LTD.

CH1308325-LR

3Pcs Gasket Scraper Set

Description:

* 1pc Straight gasket scraper

* 1pc 17∘gasket scraper

* 1pc 45∘gasket scraper

* Material: -Handle: PP -Blade: Carbon Steel

E-mail: chihtai@ms16.hinet.net

CH1308326

Gasket Scraper

Description:

* Manufactured from carbon steel, hardened, tempered and stain chrome finished with shot blast scraper end.

* For cleaning cylinder heads and removing old sealants or carbon.

* Material: -Handle: PP -Blade: Carbon Steel

CH1308139

Gasket Scraper

Description:

* For removing seal residue, e.g. cylinder head seals

* Extra-long design for hard to reach areas

* With replacement blades

CH130827

Rubber Gasket Locking Tool

Description:

* Curved polished tip easily slides the locking rubber gasket into place.

* Overall length: 8” (210mm)

* Material: -Handle: PP + TPR -Blade: CR-V

CH130828

Ball End Tool for Self-Locking Rubber Gaskets

Description:

* Curved polished tip easily slides the locking rubber gasket into place.

* Overall length: 10” (255mm)

* Material: -Handle: PP + TPR -Blade: CR-V

CH130857 Ball End Tool for Self-Locking Rubber Gaskets

Description:

* Curved polished tip easily slides the locking rubber gasket into place.

* Overall length: 12.5” (320mm)

* Material: -Handle: PP + TPR -Blade: CR-V

CH130867

Ball End Tool for Self-Locking Rubber Gaskets

Description:

* Curved polished tip easily slides the locking rubber gasket into place.

* Overall length: 24” (610mm)

* Material: -Handle: PP + TPR -Blade: CR-V

CH1308327-5 5Pcs Gasket Scraper Set

Description:

* Manufactured from carbon steel, hardened, tempered and stain chrome finished with shot blast scraper end. * For cleaning cylinder heads and removing old sealants or carbon.

* Material: -Handle: PP + TPR -Blade: Carbon Steel CH1308318

CH081221

3Pcs Stainless Steel Putty Knife Set

E-mail: chihtai@ms16.hinet.net

CH081207-L

CH081207-S

Description:

* 1pc-1/4" Stainless Steel Flexible Putty Knife

* 1pc-2" Stainless Steel Flexible Putty Knife

* 1pc-3" Stainless Steel Flexible Putty Knife

4Pcs Body Filter Applicator Set

Description:

* Stainless steel blade comfortable bi-material grips for ergonomic design and comfort.

* Heavy-duty handles.

* Suitable for the application of auto body filler.

* Set includes: 2" (50mm), 3" (75mm), 4" (100mm), 6" (150mm)

4Pcs Body Filter Applicator Set

Description:

* Stainless steel blade comfortable bi-material grips for ergonomic design and comfort.

* Heavy-duty handles.

* Suitable for the application of auto body filler.

CH081213-L

4Pcs Body Filler Applicator Set

Description:

* Stainless steel blade comfortable bi-material grips for ergonomic design and comfort.

* Heavy-duty handles.

* Suitable for the application of auto body filler.

* Set lncludes: 2" (50mm), 3" (75mm), 4" (100mm), 6" (150mm)

CH081212-3

Description:

* Handle Assembly with Collet Crossing ,File Round, File Half Round, File Flat, File Knife, File Three Square, File Square, File Barrette, File Joint, File Slitting, File Marking, File Equaling, File Ballistic Nylon Storage Product

CH081222

Description:

* 1pc-4" Mini Hand File * 1pc-4"Mini Square File * 1pc-4" Mini Warding File * 1pc-4"Mini Round File * 1pc-4" Mini Half-Round File * 1pc-4"Mini Slim-Taper Triangular File

CH081232

Description:

* Heavy duty knives have all replaceable parts and a Phillip screw secure blade tightly.

* Made of high quality aluminum with a steel retaining block for the blade.

* Uses standard utility knife blades (includes 1 blade)

* Material: -Blade: Aluminum + PVC Coating -Knife: K5

* Available size: 250mmL, 450mmL and 600mmL

E-mail: chihtai@ms16.hinet.net

CH1308334

Cutting Knives Tool

Description:

* This cutting knives excels in cutting hard to reach corners.

* Cutting knives uses 6061 aluminum that measures 1 inches wide by 0.25 inches thick with a total length of 800 mm.

* The blade secures into the tool allowing the bar stock to easily slide into the urethane.

CH081233-9T

CH0915405

Flexible Curved Tooth Files

Universal Thread Restoring File

Description:

* Designed to renew all 60 degree machine screw.

* Fractional, metric, NPT and NPS pipe thread size of any diameter.

* it will restore right or left hand threads

* Thread angle : 60 ∘

* Length x size: 9” x 7/8” x 1/8”

CH0812354-C

Carbide Scraper with Dual Face Blade (Flat and Serrated)

Feature:

* Designed with extremely sharp blade for precise work helps to remove seals/ gaskets, coal/carbon, rust, paint, glue, concrete, metal deposits etc.

* Serrated blade specially and easily used on grooves and corners/edges from various surfaces.

CH0812361

Replaceable 2-in-1 Gasket Scraper PAT.

Feature:

CH0915416

CH0915416-2

CH0915416-3

E-mail: chihtai@ms16.hinet.net

* Fully machined ergonomic design handle.

* Two kinds of blade included (brass, steel), and one can be conveniently stored in the handle.

* Brass blade for safely removing gaskets (especially paper gasket) on delicate aluminum engine blocks.

* Steel blade for stubborn gasket or residues on engine blocks.

Universal Thread Repair Tool

Description:

* Combine SAE and Metric Size in one tool

* No calibration required.

* Self adjusting to any pitch and size within range

* Automatically chases good threads to repair the damaged

* range: SAE 5/32”-3/4” (Metric: 4-19mm)

* Pipe threads max. 7/16”

* 60 ﾟ, ISO, UNC, UNF, NPT

* 55 ﾟ, BSW, BSF, BSP

Universal Thread Repair Tool

Description:

* Combine SAE and Metric Size in one tool

* No calibration required.

* Self adjusting to any pitch and size within range

* Automatically chases good threads to repair the damaged

* range: SAE 11/16”-1-1/2” (Metric: 17-38mm)

* Pipe threads range: 3/8”-1-1/8”

* 60 ﾟ, ISO, UNC, UNF, NPT

* 55 ﾟ, BSW, BSF, BSP

Universal Thread Repair Tool

Description:

* Adjustable to any available thread diameter & pitch quickly

* Applicable to most thread standard as ISO, UNF, UNC, NPT, BSW, BSP

* With 2 cutting blades(58RC) guided by the existing thread, re-groove the damaged part.

* Range: 35-152mm (1-3/8” to 6.0”), pipe: 1” to 5-1/2”

CHIH TAI Y&S CO., LTD.

CH1308118 Hose and Cotter Pin Remover

Description:

E-mail: chihtai@ms16.hinet.net

* Angled, pointed tip allows for the separating of hoses from fitting clamps.

* Unique angle provides leverage to remove cotter pins from most environment.

* For using on most hoses and cotter pins

* Material: -Handle: PP -Blade: CR-V

CH1308118-1

Hose and Cotter Pin Remover

Description:

* Hardened and tempered Chrome Vanadium steel shafts

* Features textured comfort grip handles

* Suitable for a wide variety of windscreen replacement applications

* Material: -Handle: PP + TPR -Blade: CR-V

CH1308118-2

Radiator Hose Tool

Description:

* Speed up the removal and install radiator hoses and place the hook between the hose and connector to start

* Length: 185mm

* Material: -Handle: PP + TPR -Blade: CR-V

CH1308118-3

Cotter Pin & Split Pin Remover

Description:

* An ideal tool for extracting split pins from hard to reach slotted and castle nuts.

* Also used for removing broken glass from the rubber seal on automotive windscreens

* Material: -Handle: PP + TPR -Blade: CR-V

CH130856

Universal Split Pin Hook

Description:

* Universal split pin tool for extracting split pins from hard to reach slotted and castellated nuts etc.

* Drop forged head treated alloy steel

* Material: -Handle: PP + TPR -Blade: CR-V

CHIH TAI Y&S CO., LTD.

CH130856-2

Universal Split Pin Hook

Description:

E-mail: chihtai@ms16.hinet.net

* Universal split pin tool for extracting split pins from hard to reach slotted and castellated nuts etc.

* Drop forged head treated alloy steel

* Material: -Handle: PP + TPR -Blade: CR-V

CH130856-2P

Universal Split Pin Hook Set

Description:

* Universal split pin tool for extracting split pins from hard to reach slotted and castellated nuts etc.

* Drop forged head treated alloy steel

* Material: -Handle: PP + TPR -Blade: CR-V

CH1308220

8Pcs O-Ring And Pick Set

Contents:

* 1pc curved pick

* 1pc 90∘pick

* 1pc offset pick

* 1pc straight pick

* Plus 4 spoon type removers that prevent damage to o-rings and seals

* Chrome Vanadium blades

* Soft grip handles

* Material: -Handle: PP -Blade: CR-V

CH1308121

4Pcs Seal Removal Tools

Description:

* Rounded tip with blended radius edge allows to removal seals or o-rings while reducing chance of damaging to seal or finished surface 2 tip configurations and 2 blade lengths handle most seal removal situations.

* Transmissions, heater and vacuum hoses, oil pump drive shaft seals, injectors and fuel rail o-rings, inner tie rod rack boot and CV boot removal, fork seals and caliper dust boot assemblies on Harley-Davidson other motorcycles and steering racks and pumps

* Material: -Handle: Acetate -Blade: CR-V

E-mail: chihtai@ms16.hinet.net

CH1308280 4Pcs Seal Removal Tools

Description:

* Rounded tip with blended radius edge allows easy removal of seals or o-rings while reducing chance of damage to seal or finished surface 2 tip configurations and 2 blade lengths handle most seal removal situations.

* Transmissions, heater and vacuum hoses, oil pump drive shaft seals, injectors and fuel rail O-rings, inner tie rod rack boot and CV boot removal, fork seals and caliper dust boot assemblies on Harley-Davidson and other motorcycles and steering racks and pumps.

* Material: -Handle: PP + TPR

- Blade: Stainless steel

CH1308120 4Pcs Mini Hook And Pick Set

Description:

* Design to ease the removal of o-ring, cotter pins seals and bushes in various automotive application

Content:

* 1pc combination pick

* 1pc 90∘pick

* 1pc straight pick

* 1pc hook pick

* All length: 125mm Material: * Handle: Acetate

* Blade: Stainless Steel

CH1308120-A

4Pcs Hook And Pick Set

Description:

* Design to ease the removal of o-ring, cotter pins seals and bushes in various automotive applications.

* 1pc combination pick

* 1pc 90∘pick

* 1pc straight pick

* 1pc hook pick

* All length: 125mmL

* Material: -Handle: PP + TPR

-Blade: Stainless steel

CH1308336-5 5Pcs Extra Long Hook and Pick Set

Description: * Design to ease the removal of o-ring, cotter pins seals and bushes in various automotive applications.

Content: * 1pc awl * 1pc hook * 1pc pick, 90∘ * 1pc curved with 90∘ * 1pc pick, 45∘

Material: * Handle: PP + TPR * Blade: CR-V

Description:

* Set Includes Sizes: Straight, Hook, Combination, Dual Angle, 45∘, 90∘ * Includes Organizational TrayAdvanced Tri-Iobal ergonomic design handle * Increases torque and provides comfort while reducing fatigue TPE (Thermal Plastic Elastomer) over-mold Ensures firm grip * Resistant to acids, fluids and solvents * Large 5/16" (8mm) shaft diameter for added strength * Chrome-Vanadium Steel Shafts with High-Polished Chrome Plated Finish

E-mail: chihtai@ms16.hinet.net

CH1308140

4Pcs Mini Hook And Pick Set

Description:

* Design to ease the removal of o-ring, cotter pins seals and bushes in various automotive applications. Textured cushion handle provides a sure grip, even with greasy hands

Content:

* 1pc awl

* 1pc hook

* 1pc pick, 90∘ * 1pc pick, 45∘

Material:

* Handle: Aluminum + PVC Coating

* Blade: Stainless Steel

CH1308111

8Pcs Mini Hook And Pick Set

Description:

* Design to ease the removal of o-ring, cotter pins seals and bushes in various automotive applications. Textured cushion handle provides a sure grip, even with greasy hands

Material:

* Handle: Aluminum + PVC Coating

* Blade: Stainless Steel

CH181724

5 In 1 Hooks with Pick Up Tool

Description:

* 1pc-3.5 x 83mm long Straight hook

* 1pc-3.5 x 85mm long 120 degree hook

* 1pc-3.5 x 93mm long 90 degree hook

* 1pc-3.5 x 93mm long round angle hook

* 1pc-0.5lb ,6 Steps pick up tool

* Material: CRV 6150, Pick up tool brass tube

CHIH TAI Y&S CO., LTD.

CH1308113

5Pcs

Mini Hook & Magnetic Pick-up Set

Description:

E-mail: chihtai@ms16.hinet.net

* Design to ease the removal of o-ring, cotter pins seals and bushes in various automotive applications.

Content:

* 1pc magnetic handle

* 1pc awl

* 1pc hook * 1pc pick, 90∘ * 1pc pick, 45∘

Material:

* Handle: Aluminum + Magnet * Blade: S2 Steel

CH1308113-2

5Pcs Mini Hook & Magnetic Pick-up Set

Description:

* Design to ease the removal of o-ring, cotter pins seals and bushes in various automotive applications.

Content:

* 1pc magnetic pick-up handle

* 1pc awl * 1pc hook * 1pc pick, 90∘ * 1pc pick, 45∘

Material:

* Handle: Aluminum + Magnet * Blade: S2 Steel

CH181757-C

7Pcs Hook & Precision Driver Set

Description:

* 1pc- Two Color Handle

* 1pc- Straight hook

* 1pc-120 degree hook

* 1pc- 90 degree hook

* 1pc- Round angle hook

* 2pcs- 120mmL Double End Bits: PH#0/SL#3.0 ,T15/T20

CH1308338

O-Ring And Seal Pick

Description:

* Double end tool suitable for use with all type of o-ring and grease seal.

* Knurled barrel gives extra grip to greasy hands

* 1pc combination pick and hook pick

Material:

* Handle: Aluminum * Blade: S2 Steel

CHIH TAI Y&S CO., LTD.

CH1308338-2

O-Ring And Seal Pick

Description:

E-mail: chihtai@ms16.hinet.net

* Double end tool suitable for use with all type of o-ring and grease seal.

* Knurled barrel gives extra grip to greasy hands

* 1pc 90∘pick and straight pick

Material:

* Handle: Aluminum

* Blade: S2 Steel

CH1308338-3

O-Ring And Seal Pick

Description:

* Double end tool suitable for use with all type of o-ring and grease seal.

* Knurled barrel gives extra grip to greasy hands

* 1pc combination pick and straight pick

Material:

* Handle: Aluminum

* Blade: S2 Steel

CH1308338-4

O-Ring And Seal Pick

Description:

* Double end tool suitable for use with all type of o-ring and grease seal.

* Knurled barrel gives extra grip to greasy hands

* 1pc hook pick and straight pick

Material:

* Handle: Aluminum * Blade: S2 Steel

CH151501

Telescoping Magnetic Pick Up Tool

Description:

* Length: 170-760mm

* 8.0Lbs ,6-section "stainless steel"

* Magnet rods , with pocket clip

CH1308231-A

4mm Flexible Magnetic Pick Up Tool

Description:

* For removing broken debris from glow plug apertures and other restricted areas.

* Flexible shaft can be formed into a particular shape and hold it in position.

CHIH TAI Y&S CO., LTD.

E-mail: chihtai@ms16.hinet.net

CH101212-W New 2in1 Pick Up Tool (with Magnetic & Holding)

Description:

* Overall Length: 700mmL

CH101212-4W New 4in1 Pick Up Tool

Description:

* Overall Length: 700mmL

* With Magnetic, holding, mirror & LED light

CH101212-4 New 4in1 Pick Up Tool

Description:

* Overall Length: 700mmL

* With Magnetic, holding, mirror & LED light

* Wire with Rubber covering

Pliers & Hose Clamp

CH1211376 Claw-Grip Locking Pliers

Feature:

CH1211377

CH060903

CH060904

E-mail: chihtai@ms16.hinet.net

* Locks with a powerful non-slip grip for intricate clamping jobs.

* Holds parts/material in proper alignment.

* Makes clamping jobs easier ideal for hard to each area.

* Provides better visible working area.

* Available size: 6” (American type)

Claw-Grip Locking Pliers

Feature:

* Locks with a powerful non-slip grip for intricate clamping jobs.

* Holds parts/material in proper alignment.

* Makes clamping jobs easier ideal for hard to each area.

* Provides better visible working area.

* Available size: 6” (American type)

Locking Panel Clamps Locking Pliers

Feature:

Provides quick clamping and alignment of auto body panels; bottom jaw slides in a straight-line motion.

* Available size: 9” (American type)

Lift Support Locking Pliers

Feature:

* 4" Lifting Support Pliers are designed for brass ferrules, which provide a quick and easy hose assembly.

* Support the hood and cylinder lift on the luggage.

* The pliers securely secure the lift bracket and allow access to the engine compartment or trunk area.

* Next to the lifting rod.

E-mail: chihtai@ms16.hinet.net

CH060905 Series Copper Pinch Off Locking Pliers

Feature:

* This locking pinch-off tool is clamped and locked to the copper tube so that both hands can freely do other work.

* Adjustment screws provide tight pressure.

* The jaw opening and clamping pressure can be changed simply by turning the adjusting screw.

* A guaranteed release trigger helps keep your work safe.

* It will be released and unlocked quickly when needed. The locking clamp has a very powerful locking mechanism.

* Available size: 7” &10” (American or European type)

CH060906 Angle Nose Hose Pinch Locking Pliers

Feature:

* Long needle jaw allows to access in confined and limited space.

* Jaw with smooth teeth can prevent hose damage.

* Angled head creates parallel bite on hose.

* Constructed of forged alloy steel for maximum durability.

* Ideal for pinching or blocking the vent, radiator, vacuum, and fuel hoses/lines

Suitable for auto repair, maintenance, engineer, plumber, HVAC repair or replacement and etc.

* Size: 11”, Max jaw capacity:43mm (American or European type available)

CH071648 Series Oil Filter Grip Locking Pliers

Feature:

* For multi-purpose works, suitable for installing, removing, and tightening objects of any shape.

* Application on filters in small cars and trucks covering most vehicles in the world.

* Constructed of high-grade heat-treated alloy steel for maximum toughness and durability.

* 10” locking jaw adjusts from 2-1/8 in. to 4-1/2 in."(53mm-118mm)

* 12” locking jaw adjusts from 1-4/5" to 5-1/9"(45mm-130mm)

CH071648-B 23°Oil Filter Grip Locking Pliers (bend)

Feature:

* For multi-purpose works, suitable for installing, removing, and tightening objects of any shape.

* Bent jaws are ideal for a limit space.

* Application on filters in small cars and trucks covering most vehicles in the world.

* Constructed of high-grade heat-treated alloy steel for maximum toughness and durability.

* 12” locking jaw adjusts from 1-4/5" to 5-1/9"(45mm-130mm)

CHIH TAI Y&S CO., LTD.

CH071617 Locking Chain Clamp

Feature:

E-mail: chihtai@ms16.hinet.net

* Chain holds and locks around any shape or size.

* Ideal for awkward shape pieces and oil filter applications.

* Turn screw to adjust for repetitive use.

* Constructed of high-grade heat treated alloy steel for maximum toughness and durability.

* With ratch-like function.

* Max. dia.size:130mm, chain length: 460mm

CH071649

Exhaust Pipe Cutter/Chain Pipe Cutter

Feature:

* Cut thin wall pipes (steel, cooper, PCV etc.) up to 2.5mm in confined areas by simple ratcheting.

* Eliminate hand griping effort and ensure perfect tracking by turning T-screw.

* Material: alloy steel.

* Including: 14 cutting wheels, SUJ2 cutter wheel.

* Replaceable chain.

* Max. dia.size:90mm, chain length: 330mm

CH071636

Shunting Plier

Feature:

* Easy to clamp 2 panels.

* Enable squeeze-type resistance spot welding on e-coated panels.

* Remove less e-coating with a non-conductive coating.

* Size: 11” C-clamp CR-MO jaw & main handle. Cooper pad with 4AWG electric wire.

* American and European type is both available.

E-mail: chihtai@ms16.hinet.net

CH071644 Series Plug Weld Pliers with Pad

Feature:

* Copper alloy knurled swivel pad: Prevent burning through when plug-welding thin sheet metal.

* Weld does not stick to copper. Copper allows quick cooling of weld.

* U-shaped mobile jaw: provide pressure around the spot to be welded properly.

* Available size: 10” (American or European type)

CH071622 Series Pinch-Off Locking Pliers

Feature:

* Invaluable aid for brake repairs on cars-irrigation.

* Long rounded jaws with smooth section: instant pinch-off of hoses without serration.

* Milled tip and throat: allow firm gripping on small sections and pipes.

* Constructed of high-grade heat-treated alloy steel for maximum toughness and durability.

* Long nose design easy to reach deep space.

* Available size: 11” (American or European type)

CH071645 Plug Weld Pliers PAT.

Feature:

* Makes it easy to use your MIG welder to plug small holes in metal.

* Clamps and supports the weld area, compressing the panels for tight plug welding.

* “U” shaped movable jaw provides even clamping pressure around the spot to be welded imported.

* Available size: 9” (American type)

CH060902 Series Hose Crimping Locking Pliers

Feature:

* Designed for use with brass ferrules to provide fast and easy hose assemblies.

* Available size: 10” (American or European type)

E-mail: chihtai@ms16.hinet.net

CH071650 Series Hose Clamp Pliers

Feature:

* Services most ring-type or flat-band hose clamps.

* Lattice shaped tooth design for non-slip

* The clamps are held open with a ratchet locking mechanism.

* Special jaws design to access hose clamps in any position.

* Jaws are constructed of high-grade heat-treated alloy steel for maximum toughness and durability.

* Capacity: -CH071650, capacity: 0-38mm -CH071650-2, capacity: 22-55mm

CH060907 Series Hose Clamp Locking Pliers

Feature:

* The mesh jaws securely hold the wire springs in place.

*Clamp the hose clamp with a locking clamping force to increase productivity.

* The clamp is left in the pliers.

* Hold the head firmly and lock the wire hose clamp in place.

* Available size: 6” & 9” (American or European type)

CH071647 Lock Grip Hose Clamp Pliers-90 degree PAT.

Feature:

* Heavy duty construction for improved durability, helping eliminate the need for cables and repair kits.

* Forged clamp is designed to work on all styles of spring clamps, including heavy duty clamps.

* Fine adjustment of the locking lever prevent damaged to plastic hose clamp.

* The patented ratcheting feature offers numerous locking positions.

* Work on spring clamps ranging from 3/4” thru 2-3/4”.

* Double hinged locking mechanism adds leverage for less user fatigue.

* For spring clamp range: 19-70mm.

CH0915247-A

Hose clamp tool for Toyota & Lexus

Description:

* For Toyota & Lexus hose clamp installer & remover.

* Two screws design, one for release the clamp, one for fixing the clamp on max dimension.

CH050338 Micro Hose Clamp Tensioner

Description:

* This hose clamp can be applied on multi-type of hose clamp

* This tool is able to operate in small engine room with one clip to keep tension and then take the hose off easily.

* Capacity range: 5-55mm

CH091146

Spring Hose Clamp Tool-85MM

Description:

* For compressing spring steel hose clamps

* Particularly useful in confined spaces

* Universal use for all vehicles

* Also usable on the new style VAG Clips

* Jaw Capacity 60mm

CH091147

Spring Hose Clamp Tool-60MM

Description:

* For compressing spring steel hose clamps

* Particularly useful in confined spaces

* Universal use for all vehicles

* Also usable on the new style VAG Clips

*Jaw Capacity 36mm

CH0915406 Drive Shaft Joint Inserter

Description:

* Compress the circlip that is spreading and fix the fixed joint.

* C ring can be reliably held and it can be assuredly assembled.

* Since it is a screw type, you can easily compress the circlip evenly.

* All length: 150mm

* Max. open range: 50mm

CH152014

3Pcs Hose Pinch-Off Pliers

Description:

* The pinch-off pliers act as a third hand to help you keep hose changed tightly when you are servicing various engine components.

* No need to drain system when changing thermostats-save coolant-save time.

* Jaws swivel for parallel clamping.

* Locking ratchet provides tight grip in just about any position.

* Can also be used to pinch-off many other hosed. Do not use on wire reinforced radiator hose.

* Size: 8", 10", 12"

CH091545

Adjustable Style Hose Remover

Description:

* This tool specifically designed for removing hoses, quick and easily loosens and removes hoses with a simple forward and backward motion.

* The moving jaw of this tool consisting can be adjusted to fit hose diameter between Ø48 to Ø115mm.

CH091545-A

Adjustable Style Hose Remover

Description:

* This tool specifically designed for removing hoses, quick and easily loosens and removes hoses with a simple forward and backward motion.

* Without needing screwdrivers and multigrip pliers, no more torn hoses, no more damaged to plastic couplings.

* The moving jaw of this tool consisting can be adjusted to fit hose diameter between Ø24 to Ø53mm.

CHIH TAI Y&S CO., LTD.

CH1214326-B22 Hose Clamp Removal Tool

Description:

E-mail: chihtai@ms16.hinet.net

* Universally designed for loosening/opening of HENN clamps as found on coolant hoses/charge air hoses in passenger cars.

* Suitable for VW-Audi, Seat, Skoda, BMW, Peugeot, Citroen, Dacia, Fiat, Ford, Kia, Lexus, Mazda, Mercedes, Nissan, Opel/Vauxhall, Porsche, Renault, Toyota, Volvo etc.

CH1214326-B22A Hose Clamp Removal Tool

Description:

* Universal designed for loosening/opening the HENN clamps, as found on coolant hoses/charge air hoses in passenger cars.

CH121472-C Hose Clamp Pliers

Description:

* For the operation of spring band hose clamps whose three ends are located on tubes, e.g. on fuel lines and tank ventilation lines on VW, AUDI, SEAT, SKODA

* Chrome-Vanadium

* Surface nickel-plated

CH121472-E

Hose Clamp Pliers (Swivel Jaws)

Description:

* Open and closed easily by turning the pliers by 180°.

* For clamping multi-use CLIC-type hose clamps.

* Swivel jaws- for used in areas with restricted access.

* Suitable for Audi, Citroen, Fiat, Mercedes, Opel/ Vauxhall, Peugeot, SMART, VW, etc.

CH0915514 Hose Clip Pliers

Description:

* For releasing and refitting reusable hose clips, types” clip” and “clip-R”

CH0915514-A

Self-Locking Hose Clamp Pliers (Dual-Used)

Description:

* Designed for self-locking hose clamps.

* Dual-function as releasing and fixing.

* Used for 2 kinds of self-locking hose clamps.

CH0915226

Hose Clamp Vises Tool

Description:

* Design used to relieve clamp spring pressure.

* The small size works especially well on heater hose clamps.

* Tighten with 1/4” Dr. wrench with 6mm socket or used with slotted screwdriver.

* Open capacity range from 2 to 58mm.

CH120853

Multi-Direction Hose Clamp Plier

Description:

* Wide application plier, available to work on radiator clamp, fuel clamp and tank ventilation line clamp, and wheel bearing clip.

* Special intersected slots design solves limited space problem.

* 16mm-wide head more effectively grips hose clamp than Generalplierswith9mmhead.

* Plastic pending.

CH091527-B 2Pcs Clip Removal Pliers Set

Description:

* Remover all type of clip

* The front of the tool are angle and tapered fit easily under a clip

* Size: 35˚ , 80˚

CH1214109

8PCS Lock-Ring Pliers Set

Description:

Item No. L(mm) TIP Ø DIN471 DIN472

CH1214103-B 150 1.2 10~25 CH1214103-C 190 1.7 19~60 CH1214105-B 140 1.2 10~25 CH1214105-C 180 1.7 19~60 CH1214106-A 135 0.8 8~11 CH1214106-C 165 1.7 19~60 CH1214108-A 125 0.8 8~11 CH1214108-C 160 1.7 19~60

CH091563

Circlip Tool with Ped Set

Description:

* Use for internal & external applications.

* Supplied with 4 pairs of interchangeable tips.

* T-bar handle with screw action for precise control.

CH0312208-RB Bulb Pliers

Description:

*Rubber coated grasping area for assure and secure use.

*Cup-type ends make circular gripping area.

*Immersed handles for assure and secure use.

*Scissor design for easy handling.

*Cup type ends hold bulbs and electronic components securely.

*Great tool for those hard to reach bulb position.

CH0915524 Heavy Duty Locking Ring Tool

Feature:

* The tool is designed to fit the larger lock rings, ex: the lock ring on the axle shaft of passenger cars, light commercial vehicles and trucks.

* The adjusting screw has 3/8” ratchet grip which provides enough power to easily remove stuck and rusted lock rings.

* The grip angle between the tips will also always be correct no matter the size or position of the lock ring.

* This makes the tool safer, more effective and easier to use than ordinary pliers.

Content:

* 2pcs circlip pin 2.2mm

* 2pcs circlip pin 2.5mm

* 2pcs circlip pin 3.0mm

* 2pcs circlip pin 3.5mm

* 2pcs circlip pin 3.8mm

* 2pcs circlip pin 4.2mm

* 2pcs circlip pin 2.2mm with 45 degree angle

* 2pcs circlip pin 2.5mm with 45 degree angle

* 2pcs circlip pin 3.0mm with 45 degree angle

* 2pcs circlip pin 3.5mm with 45 degree angle

* 2pcs circlip pin 3.8mm with 45 degree angle

* 2pcs circlip pin 4.2mm with 45 degree angle

* 2pcs circlip pin 2.2mm with 90 degree angle

* 2pcs circlip pin 2.5mm with 90 degree angle

* 2pcs circlip pin 3.0mm with 90 degree angle

* 2pcs circlip pin 3.5mm with 90 degree angle

* 2pcs circlip pin 3.8mm with 90 degree angle

* 2pcs circlip pin 4.2mm with 90 degree angle

CH200852

11Pcs Fixing Clamp Set

Description:

* For a clamping range of 0-5mm

Feature:

* Quick installation and removal of the clamps.

* Wide clamping range at small dimensions.

* Easy to readjust the metal sheets.

* Low-price alternative instead of grip pliers.

* The small dimension(like a door sealing) allows to adjust different gaps easily.

* Application also for hardly accessible places.

CH120104 Ratchet Circlip Pliers Set- 2Pcs

Features:

* This tool allow user to extract circlips in a controlled manner, against the circlip pressure and without over-stretching the circlip.

* Interchangeable tips. Each pliers is 3 way adjustable for 90 ﾟ, 45

and straight positions. With 3 position Suitable for ring

CH091517A

Bent Type C.V. Boot Hose Clamp Cutter

Description:

* Design easy to cut the stainless steel clamp.

* Avoid to harm c.v. boot.

* With harden est material sksⅢ

* Use capacity for hose clamp.

* Width: under 10mm

* Thickness: under 0.5~0.7mm

CH120893-A

Hose Removal Pliers

Description:

* Easily disconnects hoses by gripping firmly the tubes/lines.

* Jaw for 3/16”, 1/4” and 3/8” tubes and lines.

* Especially suitable for hoses connected to tubes or lines with smooth surface, where exercising pushing force is not possible.

* Pointed jaw tip allows access to confined spaces.

* Special locking design enhances secure gripping.

* Remove hose clamp on the hose to be disconnected. Insert the jaw tip into the place where hose and tube or line is connected.

* Choose a suitable sized groove on jaw tip and grip the tube or line.

* Move the jaw lock downward and make sure the jaw is securely locked

* Disconnect the hose by pushing the two parts of the pliers towards each other (Fig. 1 and 2). Other instruction images are as follows:

CH0915400-A Changeable Hose Clamp Pliers

Description:

* Patent design cable changeable structure for easily & quickly changing cable for different hose clamp.

* 1pc 670mm length cable for standard hose clamp, opening range from 3mm to 52mm.

* 1pc 635mm length cable for clip- R type hose clamp, opening range from 0 mm to 24mm

* 1pc 370mm length patent design dual side clamp for spring type &truck hose clamp, opening range from 0mm to 75mm

CH0915400 Button Connector Pliers with Flexible Cable

Description:

* This pliers allows a quick disassembly of 2 button connectors, mainly used for fuel systems, gearbox, brake fluid, urea fluid water, power steering, air system and AC systems.

* Cable length: 650mm

* Jaw open range: 3mm to 32mm

* Changeable cable structure

CH0915400-2

Changeable Hose Clamp Pliers

Description:

* Patent design cable changeable structure for easily & quickly changing cable for different hose clamp.

* 1pc 670mm length cable for standard hose clamp, opening range from 3mm to 52mm.

CH210583

Hose Clamp Pliers

Description:

* For spring band hose clamps

CH0312105-HR Hose Clamp Pliers

Description:

* Special angle jaws designed for most kinds of hose clamp.

* Finger tip "position lock" to keep hose clamp spread open.

* Capacity: 65mm

CH0312105-HR2

Hose Clamp Pliers

Description:

* Special angle jaws designed for most kinds of hose clamp.

* Finger tip "position lock" to keep hose clamp spread open.

* Capacity: 65mm

CH130837 3Pcs Plastic Hose Clamp Set

Description:

* Made of plastic. For clamping hoses such as: Radiator hoses, Heater hoses, Fuel hoses, Fuel hoses, etc. with Ø up to 60mm.

Content:

* A: Hose Clamp for up to 10mm line diameter

* B: Hose Clamp for up to 15mm line diameter

* C: Hose Clamp for up to 24mm line diameter

CH130837-L

Composite Hose Pinch Tools

Description:

* Manufactured from heat resistant nylon.

* Rounded jaw edges prevent damage to internal hose reinforcement.

* Features locking mechanism for simple one-handed use.

* Suitable for brake, coolant, fuel & vacuum hoses.

Content:

* A Small for Brake & Fuel Hoses

* B Medium for Heater Hoses

* C Large for Radiator Hoses

Twist Socket (Bolt Extractor Socket)

CH101204-L 1/2” Dr. Long Twist Socket Set (For Air)

Description:

* Nut only using on the removal of worn or damaged screws which the usual socket doesn’t have, but also can be used on the fixing & releasing the screws as usual sockets.

* Size:3pcs-1/2”dr.x 17, 19, 21mm x 82mmL

CH101204-L4 1/2” Dr. Long Twist Socket Set (For Air)

Description:

* Nut only using on the removal of worn or damaged screws which the usual socket doesn’t have, but also can be used on the fixing & releasing the screws as usual sockets.

* Size:4pcs-1/2”dr.x 17, 19, 21,22mm x 82mmL

CH101204-19A4 Metric Series 1/2"Dr. Air Twist Socket

Description:

* Item No.:CH101204-19A408, size:8mm x 35L

* Item No.:CH101204-19A410, size:10mm x 35L

* Item No.:CH101204-19A411, size:11mm x 35L

* Item No.:CH101204-19A412, size:12mm x 35L

* Item No.:CH101204-19A413, size:13mm x 35L

* Item No.:CH101204-19A414, size:14mm x 35L

* Item No.:CH101204-19A415, size:15mm x 35L

* Item No.:CH101204-19A416, size:16mm x 35L

* Item No.:CH101204-19A417, size:17mm x 35L

* Item No.:CH101204-19A418, size:18mm x 35L

* Item No.:CH101204-19A419, size:19mm x 35L

* Item No.:CH101204-19A421, size:21mm x 35L

* Item No.:CH101204-19A424, size:24mm x 35L

CH101204-19A4 SAE Series 1/2"Dr. Air Twist Socket

Description:

* Item No.:CH101204-19A4516, size:5/16” x 35L

* Item No.:CH101204-19A4616, size:3/8” x 35L

* Item No.:CH101204-19A4716, size:7/16” x 35L

* Item No.:CH101204-19A4816, size:1/2” x 35L

* Item No.:CH101204-19A4916, size:9/16” x 35L

* Item No.:CH101204-19A41016, size:5/8” x 35L

* Item No.:CH101204-19A41116, size:11/16” x 35L

* Item No.:CH101204-19A41216, size:3/4” x 35L

* Item No.:CH101204-19A41316, size:13/16” x 35L

* Item No.:CH101204-19A41416, size:7/8” x 35L

CH101204-19A4 19PCS 1/2"Dr. Air Twist Socket Set

Content: 11pcs-1/2"dr. twist socket:10,11,12,13,14,15,16,17,19,21 & 24mm 1pc-1/2"dr. x 3/8"sq. hole 3pcs-1/2"dr. extension bar: 75mm, 125mm & 250mm 2pcs-Locking pin: dia.3x20mm & 25mm 2pcs-Rubber rings: dia.19mm & 24mm

CH101204-HM 3/8”dr. Hexagon Twist Socket

Description:

* Item No.:CH101204-HM8, size: 8mm

* Item No.:CH101204-HM10, size: 10mm

* Item No.:CH101204-HM11, size: 11mm

* Item No.:CH101204-HM12, size: 12mm

* Item No.:CH101204-HM13, size: 13mm

* Item No.:CH101204-HM14, size: 14mm

* Item No.:CH101204-HM15, size: 15mm

* Item No.:CH101204-HM16, size: 16mm

* Item No.:CH101204-HM17, size: 17mm

* Item No.:CH101204-HM19, size: 19mm

CH101204-HS Series 3/8”dr. Hexagon Twist Socket

Description:

* Item No.:CH101204-HS516, size: 5/16”

* Item No.:CH101204-HS616, size: 3/8”

* Item No.:CH101204-HS716, size: 7/16”

* Item No.:CH101204-HS816, size: 1/2”

* Item No.:CH101204-HS916, size: 9/16”

* Item No.:CH101204-HS1016, size: 5/8”

* Item No.:CH101204-HS1116, size: 11/16”

* Item No.:CH101204-HS1216, size: 3/4”

Description:

* Item No.:CH101204-4HM8, size: 8mm

* Item No.:CH101204-4HM10, size: 10mm

* Item No.:CH101204-4HM11, size: 11mm

* Item No.:CH101204-4HM12, size: 12mm

* Item No.:CH101204-4HM13, size: 13mm

* Item No.:CH101204-4HM14, size: 14mm

* Item No.:CH101204-4HM15, size: 15mm

* Item No.:CH101204-4HM16, size: 16mm

* Item No.:CH101204-4HM17, size: 17mm

* Item No.:CH101204-4HM18, size: 18mm

* Item No.:CH101204-4HM19, size: 19mm

* Item No.:CH101204-4HM21, size: 21mm

* Item No.:CH101204-4HM24, size: 24mm

CH101204-4HM Series 1/2”dr. Hexagon Twist Socket

CH101204-4HS Series 1/2”dr. Hexagon Twist Socket

Description:

* Item No.:CH101204-4HS516, size: 5/16”

* Item No.:CH101204-4HS616, size: 3/8”

* Item No.:CH101204-4HS716, size: 7/16”

* Item No.:CH101204-4HS816, size: 1/2”

* Item No.:CH101204-4HS916, size: 9/16”

* Item No.:CH101204-4HS1016, size: 5/8”

* Item No.:CH101204-4HS1116, size: 11/16”

* Item No.:CH101204-4HS1216, size: 3/4”

* Item No.:CH101204-4HS1316, size: 13/16”

* item No.:CH101204-4HS1416, size: 7/8”

CH101204-NSM Series Power Grip Nut Setters Set

Description:

* Nut only using on the removal of worn or damaged screws which the usual socket doesn’t have, but also can be used on the fixing & releasing the screws as usual sockets

Size:

* Item No.:CH101204-NSM06, size: 6mm x 65L

* Item No.:CH101204-NSM08, size: 8mm x 65L

* Item No.:CH101204-NSM10, size: 10mm x 65L

* Item No.:CH101204-NSM11, size: 11mm x 65L

* Item No.:CH101204-NSM12, size: 12mm x 65L

* Item No.:CH101204-NSM13, size: 13mm x 65L

* Item No.:CH101204-NSM14, size: 14mm x 65L

* Item No.:CH101204-NSM16, size: 16mm x 65L

* Item No.:CH101204-NSM17, size: 17mm x 65L

CH101204-NSS Series Power Grip Nut Setters Set

Description:

* Nut only using on the removal of worn or damaged screws which the usual socket doesn’t have, but also can be used on the fixing & releasing the screws as usual sockets

Size:

* Item No.:CH101204-NSS316, size: 3/16” x 65L

* Item No.:CH101204-NSS416, size: 1/4” x 65L

* Item No.:CH101204-NSS516, size: 5/16” x 65L

* Item No.:CH101204-NSS616, size: 3/8” x 65L

* Item No.:CH101204-NSS716, size: 7/16” x 65L

* Item No.:CH101204-NSS816, size: 1/2” x 65L

CHIH TAI Y&S CO., LTD.

E-mail: chihtai@ms16.hinet.net

CH101204-9M 9PCS 3/8” Dr. Twist Socket Set (Bolt Extractor Socket)

Description:

* Nut only using on the removal of worn or damaged screws which the usual socket doesn’t have, but also can be used on the fixing & releasing the screws as usual sockets.

* Socket size: 8,10,11,12,13,14,16,17,19mm

CH101204-9S 3/8" Dr. Twist Socket Set

Description:

* Nut only using on the removal of worn or damaged screws which the usual socket doesn’t have, but also can be used on the fixing & releasing the screws as usual sockets.

* Size:3/8”dr. x 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 3/4”, 11/16” & 5/8”

Torque Limited Socket

Description:

* 1/2”dr.

Set

* Size: 17, 19, 21mm (11/16”, 3/4”, 13/16”)

* Length: 100L

* Max. torque: 100Nm

Operation:

1. To remove the lug nuts with full torque delivery of impact wrench.

2. Patented design for fastened the lug nut quickly and accurately to reach presetting torque strength.

The torque socket will free running automatically while reach the presetting torque.

3. Check the torque strength by torque wrench, according to the maintenance manual of different vehicles.

To ensure the nuts fastened securely with correct torque strength.

Description:

* 1/2”dr.

* Size: 17, 19, 21mm (11/16”, 3/4”, 13/16”)

* Length: 100L

* Max. torque: 100Nm

Operation:

1. To remove the lug nuts with full torque delivery of impact wrench.

2. Patented design for fastened the lug nut quickly and accurately to reach presetting torque strength.

The torque socket will free running automatically while reach the presetting torque.

3 Check the torque strength by torque wrench, according to the maintenance manual of different vehicles.

To ensure the nuts fastened securely with correct torque strength.

CH090928 3PCS 1/2” Dr. Deep Torque Limited Socket

CH090928-T 3PCS 1/2” Dr. Deep Torque Limited Socket Set(Thin Wall type)

CH090928-1 3PCS 1/2” Dr. Torque Limited Impact Adapter Socket Set

Description:

* 1/2”dr.

* Size: 1/2”F x 3/8”M, 1/2”F x 1/2”M, 1/2”F x 3/4”M

* Length: 100L

* Max. torque: 100Nm

Operation:

1. To remove the lug nuts with full torque delivery of impact wrench.

2. Patented design for fastened the lug nut quickly and accurately to reach presetting torque strength. The torque socket will free running automatically while reach the presetting torque.

3. Check the torque strength by torque wrench, according to the maintenance manual of different vehicles.

To ensure the nuts fastened securely with correct torque strength.

Set

Description:

* 1/2”dr.

* Size: 17, 19, 21mm (11/16”, 3/4”, 13/16”)

* Length: 150L

* Max. torque: 100Nm

Operation:

1. To remove the lug nuts with full torque delivery of impact wrench.

2. Patented design for fastened the lug nut quickly and accurately to reach presetting torque strength. The torque socket will free running automatically while reach the presetting torque.

3. Check the torque strength by torque wrench, according to the maintenance manual of different vehicles. To ensure the nuts fastened securely with correct torque strength.

CH090928-2 3PCS 1/2” Dr. Deep Torque Limited Socket

E-mail: chihtai@ms16.hinet.net

CH090928-HC 3Pcs Hydraulic Torsion Dual Torque Impact Socket Set

Description:

* 3pcs 17.19.21mm H.D.T. socket

Operation:

1. Do not use hand tools.

2. Use with a 1/2" Dr. pneumatic or power impact wrench.

3. Set up the working air pressure at 90 Psi.(6.2 bar ; 6.3 kg / cm ; 62 Pa ), and ensure the power deliver of the impact wrench between 190 ~ 210Nm. ( 140~155ft / lbs ) The output of the sockets will be 115 Nm ± 6% ( 85ft / lbs ± 6% )

4. If other Torque / Torsion required please reference the Torque / Torsion chart to set up the output of the impact wrench and obtain the require Torque / Torsion value.

E-mail: chihtai@ms16.hinet.net

CH090928-HC 3Pcs Hydraulic Torsion Dual Torque Impact Socket Set

Description:

* 3pcs 17.19.21mm x 150L H.D.T. socket

Operation:

1. Do not use hand tools.

2. Use with a 1/2" Dr. pneumatic or power impact wrench.

3. Set up the working air pressure at 90 Psi.(6.2 bar ; 6.3 kg / cm ; 62 Pa ), and ensure the power deliver of the impact wrench between 190 ~ 210Nm. ( 140~155ft / lbs ) The output of the sockets will be 115 Nm ± 6% ( 85ft / lbs ± 6% )

4. If other Torque / Torsion required please reference the Torque / Torsion chart to set up the output of the impact wrench and obtain the require Torque / Torsion value.

CHIH TAI Y&S CO., LTD. E-mail: chihtai@ms16.hinet.net

CH090928-2HC 3Pcs Hydraulic Torsion Dual Torque Impact Socket Set

Description: * 3pcs 17.19.21mm x 150L H.D.T. socket

Torque Limited Socket

Available Sizes:

*9pcs SAE : 3/16",7/32",1/4",9/32",5/16",11/32",3/8",7/16",1/2"

*9pcs Metric: 4mm,5mm,5.5mm,7mm,8mm,9mm,10mm,11mm, 12mm CH081223-S

Available Sizes:

*9pcs SAE : 3/16",7/32",1/4",9/32",5/16",11/32",3/8",7/16",1/2"

*9pcs Metric: 4mm,5mm,5.5mm,7mm,8mm,9mm,10mm,11mm, 12mm

CH1308299-A

E-mail: chihtai@ms16.hinet.net

Description:

* These new premium quarter turn fasteners tools fit comfortably in your hand and has a 3/16” Hex Head – Fits quarter-turn fasteners. Use the right tool to prevent fastener damage & scratching your race car or other vehicle. 6-1/4” overall length w/ plastic & rubber grip handle. Works with all brands of quarter-turn fasteners.

* Material: -Handle: PP+TPR -Blade: 8660

CH1214127-A

Description:

CH1214127-B

Description:

CH050342

Description:

CH121454-A13M

Description:

* 1/2" DR., Metric Size: 20, 21, 22, 23, 24, 25, 26, 27, 28, 30, 32 mm

* 1pc-125mm Extension bar * 1pc-385mm F Handle * Material： -Crowfoot：SCM440 -Extension bar & F Handle：CR-MO

CH121454-A19M

Description:

* 3/8”dr., Metric Size: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17,18, 19mm

* 1/2”dr. Metric Size: 21, 22, 24, 27, 28, 30, 32mm

CH121454-B16S

Description:

* S.A.E Size: 3/8" DR. -5/16", 3/8", 7/16", 1/2", 9/16", 5/8" 11/16", 3/4"

* 1/2" DR.-13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4"

CH1214401-M

Description:

* Adapted to low torque application. * 1/4”dr.

Content:

* Crowfoot size: 7,8,10,11,12,13,14mm

* With 1pc braker bar, 1pc extension bar

E-mail: chihtai@ms16.hinet.net

CH1214249-A,-B,-C,-D.-E

Multi-Function Socket Set

Description:

* For use with hydraulic, A/C and plumbing fittings, tie-rod ends, O2 sensors and diesel injectors.

* For hard to reach fasteners where an open end wrench will not work.

* Sockets fit both Metric and SAE.

* Great for damaged or worn nuts.

* Closed ring socket for seized track rod locking nuts.

* Square drive can be used with torque wrench or breaker bar for precise tightening.

* Closed socket ensures a tight grip, it will not spread open to release nut.

* CH1214249-A ,Size: 3/8"DR-11.12.13.14.16mm (7/16".1/2".9/16".5/8")

* CH1214249-B ,Size: 1/2"DR-17.18.19.20.21.22.23.24mm (11/16".3/4".13/16".7/8".15/16")

* CH1214249-C, Size: 1/2"DR-25.26.27.29.30.32mm (1".11/16".1-1/8".1-3/16".1-14")

* CH1214249-D, Size: 1/2"DR-32.33.34.35.36.38mm (1-1/4".15/16".1-3/8".1-7/16".1-1/2")

* CH1214249-E, Size: 3/4"DR-41.44.46.48.50mm (1-5/8".1-3/4".1-13/16".1-7/8".2")

CH1214400

Adjustable Tap Socket (M4~M14)

Description:

* Designed for using with taps, reamers, screw extractors and other tools with square shank.

* Fits for common taps from M4 to M14.

* Size: 3/8”dr. x 19mm

CH060721

24”

Heavy Duty Chain Wrench

Description:

* Designed for hanlding most shapes: round, square, hexagon, octagon

* With comfort grip handle

* Handle length: 520mm (20.5”)

* Chain length: 615mm(24”)

* Chain using range: dia.76~170mm

* Material: CR-MO

CH0915425

4Pcs Stud Puller

Feature:

* Convenience and easily to remove the studs.

* Content size: 2.5, 3, 3.5, 4mm

CH1214413

Air Line Disconnect Tool Set

Description:

* This tool set is used on hard to reach areas.

* Angled end allows max. leverage, straight end fits in tight spots.

* Application on heavy duty truck/ brakes/ suspension/steering/engine/ transmission.

* Also disconnect other push in fittings, including: flow control valve, check valves, shuttle valves, quick exhaust valves, other function control fittings in compressed air system.

* Available size: 6,8,10,12,15,16,18mm &1/2”

CHIH TAI Y&S CO., LTD.

CH0812360 Crowbar Wrench Adapter Feature:

E-mail: chihtai@ms16.hinet.net

* Used with any 3/8” drive ratchet or 24mm open-end wrench.

* Lightweight, portable, and easy to use.

* Material: SCM440

Other Repair Tools

CH081228 Hose Pinchers

Description:

* Shut off flow through vacuum lines, fuel lines, small coolant lines, etc.

* Design of tool enables use in tight areas.

* Not designed for crimping copper, aluminum, steel, or hard plastic lines.

CH081215

4Pcs Fluid Line Clamper Sets

CH110512

Honing Guide

Description:

* This tool can be used to stop the liquid flow without damaging the hose Model: C261 Model

* Applicable Hose Size C261-1 ~Ø10mm (3/8") C261-2 ~Ø15mm (1/2") C261-3 ~Ø25mm (1") C261-4 ~Ø45mm (1-3/4")

Feature:

* This side clamping honing guide securely holds a wide variety of chisels and plane blades to attain very sharp, precise and square edges.

Feature:

* This simple design allows for easy operation.

* Flexible arms allow you to apply pressure to your parts.

Content:

* Three flexible unusual arms

* Two clips

* Magnifying glass

* Suction cup holder

Description:

* This product is a fixing tool that makes it convenient to fix sticky material or label sticking on the products.

* The characteristic of the product is that it does not need to fix with hand for a long time and it will have the effect of stable fixation and adherence. CH1214245

Description:

* Simply press the end to release spring impact.

* Impact adjustable from 15 to 25 kg by rotating the end.

* Tip hardened to 57-60HRc.

E-mail: chihtai@ms16.hinet.net

CH050336

Universal Support Hook

Description:

* The Universal Support Hook can be your third hand to hold the steering knuckle or brake caliper, prevent the oil pipe or wire be tearing.

* Range:200~520mm

CH050337

Adjustable Trimming Edge Tool

Description:

* Patented design

* Adjustable angle from 60-120 degree.

* Easy to trim the edge with wallpaper, painted veneer, PVC skin..etc.

* With exchangeable blade

* Capacity: less than 0.5mm

CH120861 Handy Pitch Gauge

Description:

* 3-in-1 functions: diameter pitch length.

* Suitable for male parallel bolts, studs and screws.

* Includes most common sizes in metrics and SAE.

* Convenient tool avoids incorrect bolt, stud or screw installation.

* Material: ABS

Instruction:

* For checking threads

- Find a hole with a similar size to the object (a bolt, stud or screw to be checked) (Fig 1).

- Connect the object to the hole to see if the hole matches the object.

- Note: When the object threads match holes’ threads, the object can be rotated smoothly. If any unsmoothness occurs, it is an indication that the threads do not match. Connection with force may cause holes’ threads damaged.

* For checking diameter

- Position the object against the innermost part of the V-shape groove.

- Find the point where the edges of the object and the gauge touch each other (see the arrows on Fig 2), and read the marking.

* For checking length

- Place the object on both sides of the gauge (SAE on the right and metrics on the left).

- One end of the object should align the upper line of the gauge (Fig. 3 and 4) and read the marking.

E-mail: chihtai@ms16.hinet.net

CH041105 7” Wire Cutter

Description:

* Full length: 180mmL(7”)

* Capacity: dia.:5mm wire rope, dia.:4mm steel wire rope, dia:2.5mm piano wire

* Blades: high carbon steel with induction

Feature:

* Induction hardened blades provide a clean cut of wire without flattening, fanning and splaying

* Handles padded with soft component for comfort in use

* Ergonomic design makes low hand force and provides a mechanical advantage to achieve an easier cut

* Smaller open width of handles makes it easy to close back and fits any hand comfortably

* Light weight and spring loaded to help reduce hand fatique

CH0812266

Dual-functional Pipe Tool (Straightening and bending)

Description:

* Compatible with all types of light wall coiled tubing.

* Suitable for material as copper, brass, aluminum, stainless steel, semi-flexible coaxial cable etc

* Available size:

-Metric:4,5,6,8,10,12mm

-SAE: 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2”

CHIH TAI Y&S CO., LTD.

CH1308271

Wire Insertion Tool

Description:

E-mail: chihtai@ms16.hinet.net

* Sharp hollow-ground punch easily pierces the thickest grommets.

* Hole in handle and punch allows for easy feeding of wire through tool and the grommet, heavy gauge wiring, etc. punch design allows hole to reseal when punch is removed.

CH1308229-B Wire Guide Tool

Description:

* Covered iron wire Adopting flexible material that can change angle freely.

* Wire loops Original design that can be passed smoothly even in narrow places.

* Margin size for wiring far away

* Length:100cm

CH1308230

Wire Insertion Tool Set

Description:

* Prevents damage to electrical sheathing

* Helps technician feed or pull wire around a number of obstacles, or against pieces of metal.

* Radius handle end: End of handle has a gentle radius that allows wire sheathing to be pulled smoothly without damage.

* Application: Great tool for A/V & dashboard wiring systems, wiring through firewalls, wiring to motors & pumps and wiring to headlight, brake and indicator lights, Wiring applications for RV’s, trailers, aviation, marine as well as remote starters and alarm systems.

CH1308218

Valve Spring Compressor\

Features:

CH1308218-2

E-mail: chihtai@ms16.hinet.net

* Use to seal steel lines once disconnected.

* Prevents fluid leaks and contamination during service.

* Use with all automotive fluids.

* Suitable for Fuel Rails and Lines, Flare Type Steel Brake, Fuel and A/C Lines, Banjo fittings on Brake, Power Steering and Transmission Cooler Lines. Installs in seconds.

* This is for the following Ford Lincoln or Mercury vehicles with the 3V 4.6L or 5.4L engines Mustang F-150 Super Duty F-250 F-350 F-450 F-550 Explorer Mountaineer Sport Trac Expedition Navigator

* Application: Expedition 5.4L 3V 2005-2011 Explorer 4.6L 3V 2006-2010 F-150 4.6L 3V 2009 2010 F-150 5.4L 3V 2004-2010 F-250 5.4L 3V 2005-2009 F-250 6.8L 3V 2005-2009 F-350 5.4L 3V 2009 F-350 6.8L 3V 2005-2009 F-450 5.4L 3V 2005-2009 F-450 6.8L 3V 2005-2009 F-53 6.8L 3V 2006-2012 F-550 5.4L 3V 2005-2009 F-550 6.8L 3V 2005-2009 F-59 6.8L 3V 2011 2012 Mark LT 5.4L 3V 2006-2008 Mountaineer 4.6L 3V 20062010 Mustang 4.6L 3V 2005-2010 Navigator 5.4L 3V 2005-2012

Valve Spring Compressor

Application:

* Ford Escape 3.0L (4V) model 2001-2012.

* Ford Escape Hybrid 3.0L (4V) model 2005-2012.

* Ford Hundred and Freestyle model 2005-2007.

* Ford Fusion 3.0L (4V) model 2006-2012.

* Ford Fusion Hybrid 3.0L (4V) model 2010-2012.

* Ford Taurus 3.0L (4V) model 2000-2005.

* Lincoln MKZ 3.0L (4V) model 2007-2012.

* Lincoln MKZ Hybrid 3.0L (4V) model 2011-2012.

* Lincoln Zephyr 3.0L (4V) model 2006.

* Mercury Cougar 2.5L model 2002.

* Mercury Mariner 3.0L (4V) model 2005-2011.

* Mercury Mariner Hybrid and Milan 3.0L (4V) model 2006-2011.

* Mercury Milan Hybrid 3.0L (4V) model 2010-2011.

* Mercury Montego model 2005-2007.

* Mercury Sable 3.0L (4V) model 2000-2005.

* Material: SCM440

E-mail: chihtai@ms16.hinet.net

CH051221 Plastic Riveter Set W/40 Rivets

Description:

* Size: 6.6mmx 17.2mm, 6.3mmx 25.2mm, 5mmx 17.2mm, 5mmx 15.8mm.

CH051225-B Angle Riveter W/ 40 Rivets

Description:

* Size: 6.6mmx 17.2mm, 6.3mmx 25.2mm, 5mmx 17.2mm, 5mmx 15.8mm.

* This long-reach tool is for hard-to- reach spots, especially in automotive applications such as flexible bumpers, wheel wells, license plate brackets and bumper reinforcements.

Step for use: Locking button. Use the plastic riveter to have a rivet nailed into the hole. Squeeze the handles of the riveter together. Grind off the end of the rivet by hand or pliers.