Fire Hydrant Software

Overcoming the multi-faceted challenges of building safety with top-of-the-line ductwork and fire hydrant software

Key point •DOLPHIN ductwork system program •Technical details of DOLPHIN ductwork system program •SPRINK2000 fire hydrant software •Other key features of SPRINK2000 fire hydrant software

DOLPHIN ductwork system program

DOLPHIN computer program by the trusted and leading building services software provider company ACADS-BSG calculates the pressure loss of a series of ducts and fittings, enabling the user to determine the required fan pressure for a duct network. The user enters the ducts starting from the fan and working down towards a selected terminal. Supply ducts and fittings are entered on one

Technical details of DOLPHIN ductwork system program

•The duct and fitting pressure loss calculation software DOLPHIN performs an hourly cooling load analysis, taking account of thermal storage, on a design day in each month of the year.

•Specific monthly 3 pm design dry and wet bulb temperatures are available in the DOLPHIN computer program for over 600 locations in Australia, and many offshore locations.

•The ductwork system program carries out a psychrometrics analysis for each AHU with the coil performance expressed as a bypass factor, leaving coil temperature or nominated air quantity including fixed by pass and dump back systems.

SPRINK2000 fire hydrant software

SPRINK2000 fire hydrant software by ACADS-BSG can be used to analyse automatic fire sprinkler systems with a simple end, side or center-fed configuration, or more complicated looped and gridded systems. The computer program can be used to analyse the fire hydrant and hose reel installations, or combined sprinkler, hydrant or hose reel systems, or any other system where the discharges can be represented by a K factor and minimum flow.

Other key features of SPRINK2000 fire hydrant software

•The piping system in SPRINK2000 fire hydrant software can have up to 10 input points that can be modelled as a fixed pressure, a town mains water supply, or a pump.

•The computer program uses the Hazen-Williams formula for hydraulic analysis, and works on a wide range of units including Metric, British, and the US. •All nodes that are not nominated as discharges or input points are automatically assigned as reference nodes to save input.

https://www.acadsbsg.com.au/

Social Link: https://www.linkedin.com/company/acads-bsg/