Stumpf_Recogida selectiva_Arsam

Waste separation Duplex / Triplex

Details

Waste separation Duplex / Triplex Compact multi-use bin for stationary and/or mobile use.

Galvanised inner container

Level control

COLOUR SCHEME Body colour

Self-closing drop flap

Insertion flap colour

Square locking mechanism

www.arsam.es - b2b@arsam.es

Waste separation Duplex / Triplex

Accessories Refuse bags

Areas of application and use

Product description

Compact 2 or 3 compartment bin for use in any building.

The compact bins are made of fully galvanised quality sheet steel and high-quality textures achieved by powder-coating.

The Duplex sorting system as standard with two self-closing insertion flaps is available in the colours anthracite and blue, which eliminate odours and are fire-resistant. Two inserts made of galvanised sheet steel inside the containers ensure a capacity of 1 x 30 and 1 x 60 litres for optimum refuse collection.

With the compact DUPLEX bins, two different types of waste (mostly non-processible waste and paper) can be collected separately in a container.

With the TRIPLEX sorting system, three different types of waste (mostly non-processible ‘yellow bag’ waste and paper) can be collected separately in a container.

The container colour in a friendly light grey fits perfectly in every set-up environment.

Very little space is required for set-up with less than a half qm².

Both of the collectors can be retrofitted to mobile collecting stations by separately ordering the roller set.

(Art.-No: 5407000).

Stumpf standards

Packaging unit: 250 pieces For Duplex Art.-No: 5406621 (small) Art.-No: 5406620 (big) For Triplex Art.-No: 5406621

The Triplex sorting system is equipped with three self-closing insertion flaps and is available in the colours anthracite, yellow and blue. Three inserts also made of galvanised sheet steel inside the containers ensure a capacity of 3 x 30 litres for optimum refuse collection.

The inserts in the interior are taken out through the folding doors lockable with square-shaped locks and mounted on the front in each case (square keys are supplied). Two adjustable feet on the front compensate for uneven floors (level control).

If the collectors are to be used in a mobile basis, the existing levelling feet are removed and the separately ordered rollers are screwed into the existing threaded bushes. In this case, the height of the containers changes by + 100 mm.

Dimensions (HxWxD):

920 x 580 x 380 mm

Colour scheme for the body: light grey RAL 7035 Colour scheme for the Duplex insertion flaps: anthracite grey RAL 7016, gentian blue RAL 5010 FIRE

Pictograms Ø 70 mm

Colour scheme for the Triplex insertion flaps: anthracite grey RAL 7016, signal yellow RAL 1003, gentian blue RAL 5010 5 pieces. White print on transparent film with symbols for paper, yellow-bag waste, non-processible waste, glass and organic waste.

Art.-No: 5408812

Waste separation Duplex

Art.-No: 635-075-0-2-400

Dimensions mm (H x W x D) Capacity in litre Weight in kg Colour for the body Colour for the insertion flaps

920 x 580 x 380 1 x 30, 1x 60 29,0 light grey anthracite, blue

Set of double rolls

Waste separation Triplex

Art.-No: 635-075-0-2-300

Dimensions mm (H x W x D) Capacity in litre Weight in kg Colour for the body Colour for the insertion flaps

920 x 580 x 380 3 x 30 31,6 light grey anthracite, blue, yellow

made of fiberglass-reinforced polyamide, consisting of four double rollers, two of which are lockable and four threaded bolts.

Art.-No: 5407000

www.arsam.es - b2b@arsam.es

Waste separation TD 1 / TD 2 / TD 3 / TD 4

Details

Waste separation TD Compact 1- to 4-fold-collecting stations with coloured swing lids.

Door handless made of stainless steel.

Noiseless swing lid

Closure

COLOUR SCHEME Body colour

Level control

Swing lid colours

Container guides

www.arsam.es - b2b@arsam.es

Waste separation TD 1 / 2 / 3 / 4

Accessories

Areas of application and use

Product description

Administration building, in particular, where many people come together, such as schools, universities, government agencies or hospitals, appreciate this solution for waste separation.

The TD bins are available as standard with one, two, three or four galvanised inner containers with a filling volume of 45 or 90 litres.

The self-closing swing lids eliminate odours and flag the type of refuse to be thrown in by their colour.

All collection stations have a pictogram set (5 pieces, transparent, white print, Ă˜ 70 mm) with the symbols for paper, yellow-bag waste, non-processible waste, glass and organic waste.

Compact cabinet bins for four waste fractions, which are ideally suitable for any premises. The bins are manufactured from galvanised quality sheet steel and have a high-quality texture achieved by powder-coating, making them resistant as well as impact and scratch resistant. Equipped with coloured, self-closing swing lids, fire-resistant, odour-absorbing and easy to clean.

Up to four galvanised steel inserts are located in the cabinet interior of each sorting system with a capacity of 90 or 45 litres.

The folding doors are locked with square-shaped locks (square keys are supplied).

The semi-circular, ergonomic door handles are made of stainless steel. Two adjustable feet on the front in each case compensate for uneven floors.

Stumpf standards

Dim. (HxWxD) TD 1: 975 Dim. (HxWxD) TD 2: 975 Dim. (HxWxD) TD 3: 975 Dim. (HxWxD) TD 4: 975

Refuse bags Packaging unit: 250 pieces For 45 litre containers: TD 2, TD 3, TD 4 Art.-No: 5406621 (small)

For 90 litre container: TD 1 Art.-No: 5406619

x 620 x 320 mm x 620 x 320 mm x 860 x 320 mm x 1100 x 320 mm

Colour scheme for the body: light grey RAL 7035 Colour scheme for the swing lids: anthracite grey RAL 7016, signal yellow RAL 1003, flame red RAL 3000, gentian blue RAL 5010

FIRE

Waste separation TD 1+

Art.-No: 5604007

Dimensions mm (H x W x D) Capacity in litre Weight in kg Colour for the body Colour for the swing lid

975 x 620 x 320 1 x 90 36,2 light grey gentian blue

Waste separation TD 2

Art.-No: 5603007

Dimensions mm (H x W x D) Capacity in litre Weight in kg Colour for the body Colour for the swing lid

975 x 620 x 320 2 x 45 37,2 light grey anthracite grey, gentian blue

Waste separation TD 3

Art.-No: 5602007

Dimensions mm (H x W x D) Capacity in litre Weight in kg Colour for the body Colour for the swing lid

975 x 860 x 320 3 x 45 46,6 light grey anthracite grey, signal yellow, gentian blue

Waste separation TD 4

Art.-No: 5601007

Dimensions mm (H x W x D) Capacity in litre Weight in kg Colour for the body Colour for the swing lid

975 x 1100 x 320 4 x 45 55,4 light grey

Pictograms Ă˜ 70 mm

5 pieces. White print on transparent film with symbols for paper, yellow-bag waste, non-processible waste, glass and organic waste.

Art.-No: 5408812

anthracite grey, fire red, signal yellow, gentian blue

www.arsam.es - b2b@arsam.es

Waste separation TD 2 / TD 3 / TD 4 - aspect plus -

Waste separation TD -aspect plusCompact bin for especially demanding applications: With swing lid made of high quality stainless steel with a leather grain texture.

COLOUR SCHEME Swing lid

ft moc

ha

so

Body colour

www.arsam.es - b2b@arsam.es

Waste separation TD 2 / TD 3 / TD 4 -aspect plusAreas of application and use

Product description

The - Aspect-plus - versions of the TD sorting systems are suitable for both an atrium as well as for cafeterias.

The 2 compartment, 3 compartment and 4 compartment ‘waste bin’ variants are placed in locations so as not to have a negative impact on the surrounding environment.

All collection stations have a pictogram set (5 pieces, transparent, white print, Ø 70 mm) with the symbols for paper, yellow-bag waste, non-processible waste, glass and organic waste.

They can either be attached directly to the swing lid or onto the bar above the folding doors.

Compact cabinet bins for two, three or four waste fractions, ideally suitable for upscale set-up environments.

The bins are manufactured from galvanised quality sheet steel and high-quality textures achieved by powder-coating, making them resistant as well as impact and scratch resistant.

Equipped with self-closing swing lids made of stainless steel and thus fire-resistant, odour-absorbing and easy to clean.

Between two to four galvanised steel inserts are located in the cabinet interior of each sorting system with a capacity of 45 litres.

The folding doors are locked with square-shaped locks (square keys are supplied).

The semi-circular, ergonomic door handles are made of stainless steel. Two adjustable feet on the front in each case compensate for uneven floors.

Stumpf standards

Accessories Refuse bags Packaging unit: 250 pieces For 45 litre containers: TD 2, TD 3, TD 4 Art.-No: 5406621

Dim. (HxWxD) TD 2: 975 x 620 x 320 mm Dim. (HxWxD) TD 3: 975 x 860 x 320 mm Dim. (HxWxD) TD 4: 975 x 1100 x 320 mm FIRE

Colour scheme for the body: Soft mocha Colour scheme for the swing lid: Stainless steel

Waste separation TD 2 -aspect plus-

Art.-No: 5603008

Dimensions mm (H x W x D) Capacity in litre Weight in kg Colour for the body Colour for the swing lid

975 x 620 x 320 2 x 45 38,2 soft-mocha stainless steel

Waste separation TD 3 -aspect plus-

Art.-No: 5602008

Dimensions mm (H x W x D) Capacity in litre Weight in kg Colour for the body Colour for the swing lid

975 x 860 x 320 3 x 45 47,2 soft-mocha stainless steel

Waste separation TD 4 -aspect plus-

Art.-No: 5601008

Dimensions mm (H x W x D) Capacity in litre Weight in kg Colour for the body Colour for the swing lid

975 x 1100 x 320 4 x 45 56,4 soft-mocha stainless steel

Pictograms Ø 70 mm

5 pieces. White print on transparent film with symbols for paper, yellow-bag waste, non-processible waste, glass and organic waste.

Art.-No: 5408812

www.arsam.es - b2b@arsam.es

Waste separation FD 45 -self-extinguishing-

Details

Waste separation FD 45 Low installation depth - ideal for mounting on the wall in corridors and hallways.

Gas pressure dampened, noiseless closure of the insertion flaps.

Gas pressure spring

Level control

COLOUR SCHEME Body colour

Recess for skirting boards

ProPadsŠ for the insertion flaps

Galvanised inner container

www.arsam.es - b2b@arsam.es

Waste separation FD 45

Accessories

Areas of application and use

Product description

The FD 45 sorting system is designed to be mounted on the wall in corridors and hallways, but can of course also be affixed in all other premises.

The bins are made of fully galvanised quality sheet steel and has a high-quality texture achieved by powder-coating.

Due to the small depth, the containers can also be used in hallways and corridors. A wall attachment (or wall mounting in the case of installation on the floor) is required.

The insertion flaps close in a delayed and noiseless manner through the use of gas pressure springs (fire-resistant and odour-absorbing). To colour code the insertion flaps, a set with ProPads© (= protect-pads, highly robust, self-adhesive) in the colours blue, yellow and anthracite is enclosed with each bin.

The user can thus decide on exactly what identification colours the bin should have. The galvanised inner container can be swivelled to empty or to remove the refuse bags from the front.

Capacity: 45 litres per container.

The folding doors mounted on the front are locked with square-shaped locks in the containers (square keys are supplied).

Two adjustable feet on the front in each case compensate for uneven floors.

Due to the small container depth, the systems may even be used on potential emergency escape routes.

As there is a need for silence in the set-up areas, the containers of the FD 45 sorting system are equipped as standard with gas pressure spring-loaded insertion flaps in order to limit the noise caused when closing the insertion flaps.

Stumpf standards TESTED

self-extinguishing

Refuse bags

Dimensions: 1000 x 400 x 300 mm (HxWxD) FIRE

Packaging unit: 250 pieces Art.-No: 5406621

Pictograms Ø 70 mm

Colour scheme for the body: light grey RAL 7035 © Colour scheme for the insertion flap: ProPads 5 pieces. White print on transparent film with symbols for paper, yellow-bag waste, non-processible waste, glass and organic waste.

Art.-No: 5408812

Waste separation FD 45, single-use container Dimensions mm (H x W x D) Capacity in litre Weight in kg Colour for the body Colour for the insertion flaps Art.-No:

1000 x 400 x 300 45 16,0 light grey © ProPads blue, anthracite, yellow 636-045-0-1-200

Waste separation FD 45, 3 compartment station Dimensions mm (H x W x D) Capacity in litre Weight in kg Colour for the body Colour for the insertion flaps Art.-No:

ProPads , extra ©

1000 x 1210 x 300 3 x 45 48,0 light grey © ProPads blue, anthracite, yellow 636-045-3-1-200

Carrier for the waste separation FD 45, 3 compartment station Dimensions mm (H x W x D) 125 x 1210 x 310 Weight in kg 7,5 Colour light grey Art.-No: 636-045-0-3-000 Rolling base with four glass fibre reinforced swivel casters made of polyamide, two lockable casters.

• dusty blue RAL 5014, Art.-No: 0906514 • sand yellow RAL 1002, Art.-No: 0906102 • anthracite grey RAL 7016, Art.-No: 0906716 • pale green RAL 6021, Art.-No: 0906621 • coral red RAL 3016, Art.-No: 0906316 • clay brown RAL 8003, Art.-No: 0906803 • light grey RAL 7035, Art.-No: 0906735

www.arsam.es - b2b@arsam.es

Waste separation FP 45 -self-extinguishing-

Waste separation FP 45 Insertion flap closes automatically in case of fire

Waste insertion without direct contact.

Automatic self-extinguishing features in case of fire.

COLOUR SCHEME Body colour

ProPadsŠ for the insertion flaps

www.arsam.es - b2b@arsam.es

Waste separation FP 45

Accessories

Areas of application and use

Product description

The unique property distinguishing the FP 45 product line from the other containers is the insertion flap standing open. Waste can thus be thrown in without having to touch the insertion flap or operate a foot pedal.

The bins are made of fully galvanised quality sheet steel and high-quality textures achieved by powder-coating. Due to the small depth, the containers can also be used in hallways and corridors.

A wall attachment (or wall mounting in the case of installation on the floor) is required. The insertion flaps stand open, the waste can thus be thrown in without touching the container.

In case of fire, the door of each container closes automatically (procedure patent protected, German Patent and Trademark Office, DGM certified, self-extinguishing - TÜV / GS). © To colour code the insertion flaps, a set with ProPads (= protect-pads, highly robust, self-adhesive) in the colours blue, yellow and anthracite is enclosed with each bin.

The user can thus decide on exactly what identification colours the bins should have. The galvanised inner container can be swivelled to empty or to remove the refuse bags from the front. Capacity: 45 litres per container.

The folding doors mounted on the front in the containers are locked with square-shaped locks in the containers (square keys are supplied). Two adjustable feet on the front in each case compensate for uneven floors.

A patent protected procedure ensures that the door closes automatically in case of fire thereby extinguishing the fire inside the container. The TÜV Nord has tested and certified the container as self-extinguishing.

Otherwise the FP 45 containers, similar to the FD 45 sister product line, are ideally suited to install or mount in hallways, corridors or in other narrow areas of the building.

Stumpf standards

Refuse bags

TESTED

self-extinguishing

Dimensions: 1000 x 400 x 300 mm (HxWxD)

Packaging unit: 250 pieces Art.-No: 5406621

Pictograms Ø 70 mm

Colour scheme for the body: light grey RAL 7035 © Colour scheme for the insertion flap: ProPads

FIRE

5 pieces. White print on transparent film with symbols for paper, yellow-bag waste, non-processible waste, glass and organic waste.

Art.-No: 5408812

Waste separation FP 45, single-use container Dimensions mm (HxWxD) Capacity in litre Weight in kg Colour for the body

1000 x 400 x 300 mm 45 16,0 light grey

colour for the insertion flap ©

ProPad blue © ProPad yellow © ProPad anthracite

Art.-No: 636-045-0-2-514 636-045-0-2-102 636-045-0-2-716

Waste separation FP 45, 3 compartment station Dimensions mm (H x W x D) Capacity in litre Weight in kg Colour for the bodies Colour for the insertion flaps Art.-No:

ProPads , extra ©

1000 x 1210 x 300 3 x 45 48,0 light grey © ProPads blue, anthracite, yellow 636-045-3-2-000

Carrier for the waste separation FP 45, 3 compartment station Dimensions mm (H x W x D) Weight in kg Colour Art.-No:

125 x 1210 x 310 7,5 light grey 636-045-0-3-000

Rolling base with four glass fibre reinforced swivel casters made of polyamide, two lockable casters.

• dusty blue RAL 5014, Art.-No: 0906514 • sand yellow RAL 1002, Art.-No: 0906102 • anthracite grey RAL 7016, Art.-No: 0906716 • pale green RAL 6021, Art.-No: 0906621 • coral red RAL 3016, Art.-No: 0906316 • clay brown RAL 8003, Art.-No: 0906803 • light grey RAL 7035, Art.-No: 0906735

www.arsam.es - b2b@arsam.es

Waste separation TS 2000 -self-extinguishing-

Details Waste separation TS 2000 Three sizes, five lid colours and flexibility by using front casters.

Rubberised casters

Swing lid

COLOUR SELECTION Body colour

Stainless steel handle

Swing lid colours

Recessed grip

www.arsam.es - b2b@arsam.es

Waste separation TS 2000

Accessories

Areas of application and use

Product description

Practical, smart and at an affordable price - these are the attributes that best describe the container product line.

The highest quality standards combined with aesthetic curves and design elements - this encompasses a unique amalgamation of the best product benefits and attractive appearance.

The bins are made of fully galvanised quality sheet steel and a high-quality texture achieved by powder-coating. The head elements are detachable.

Self-closing swing lids, fire resistant and odour-absorbing.

The containers can be used as stationary or mobile systems due to the casters attached to the front.

The bins are easy to handle as a result of the semi-circular, ergonomic handles made of stainless steel.

The capacity is 45, 60 or 75 litres.

Stumpf standards TESTED

self-extinguishing

FIRE

Waste separation TS 2000, 45 litre

Refuse bags

Dimensions 45 litre: 650 x 380 x 320 mm Dimensions 60 litre: 795 x 380 x 320 mm Dimensions 75 litre: 940 x 380 x 320 mm

(HxWxD) (HxWxD) (HxWxD)

Colour scheme for the body: anthracite grey

RAL 7016

Colour scheme for the swing lid: signal yellow RAL 1003 RAL 3000 flame red gentian blue RAL 5010 traffic green RAL 6024 light grey RAL 7035

Swing lid colours:

Art.-No:

Dimensions mm (H x W x D)

650 x 380 x 320

anthracite/yellow

605-045-0-0-202

Capacity in litre

45

anthracite/red

605-045-0-0-203

Insertion

swing lid, self-closing

anthracite/blue

605-045-0-0-204

Weight in kg

8,6

anthracite/green

605-045-0-0-206

Colour for the body

anthracite grey

anthracite/light grey

605-045-0-0-207

Waste separation TS 2000, 60 litre

Swing lid colours:

Dimensions mm (H x W x D)

795 x 380 x 320

anthracite/yellow

605-060-0-0-202

Art.-No:

Capacity in litre

60

anthracite/red

605-060-0-0-203

Insertion

swing lid, self-closing

anthracite/blue

605-060-0-0-204

Weight in kg

11,0

anthracite/green

605-060-0-0-206

Colour for the body

anthracite grey

anthracite/light grey

605-060-0-0-207

Waste separation TS 2000, 75 litre

Swing lid colours:

Dimensions mm (H x W x D)

940 x 380 x 320

anthracite/yellow

605-075-0-0-202

Packaging unit: 250 pieces Art.-No: 5406620

Adhesive label „coloured“

Pictogram-set, 6 pieces self-adhesive, waterproof 180 x 160 mm (HxW) Art.-No: 5408840

Pictograms Ø 70 mm

5 pieces. White print on transparent film with symbols for paper, yellow-bag waste, non-processible waste, glass and organic waste.

Art.-No: 5408812

Art.-No:

Capacity in litre

75

anthracite/red

605-075-0-0-203

Insertion

swing lid, self-closing

anthracite/blue

605-075-0-0-204

Weight in kg

12,0

anthracite/green

605-075-0-0-206

Colour for the body

anthracite grey

anthracite/light grey

605-075-0-0-207

www.arsam.es - b2b@arsam.es

Waste separation 45 -self-extinguishing-

Details

Waste separation 45 Self-extinguishing and five solid colours for safety when sorting.

Stationary or with casters for flexible use.

Four castors

Insertion

COLOUR SELECTION Body colours and insertion flap colours

Handle

Detachable head element

www.arsam.es - b2b@arsam.es

Waste separation 45

Accessories

Areas of application and use

Product description

The special properties of these containers immediately catch the eye: The bold solid colours. These deliberately increase the safety when sorting the different types of waste and clearly indicate: Only waste should be disposed of here that is actually supposed to be disposed of according to the colour scheme.

The bins are made of fully galvanised quality sheet steel and a high-quality texture achieved by powder-coating.

The head elements provided are detachable and equipped with extra-long sides to affix refuse bags, and to cover the edges.

The insertion flaps close automatically by means of torsion springs and are therefore fire-resistant and odour-absorbing.

The capacity is 45 litres in each case.

Refuse bags Packaging unit: 250 pieces Art.-No: 5406622

The containers are also available as mobile versions.

With four swivel casters, two of which are lockable.

Stumpf standards

Dimensions stationary: 640 x 330 x 310 mm (HxWxD) Dimensions mobile: 715 x 330 x 310 mm (HxWxD) TESTED

self-extinguishing

Colour scheme:

FIRE

signal yellow flame red gentian blue traffic green light grey

RAL RAL RAL RAL RAL

1003 3000 5010 6024 7035

Adhesive label „coloured“

Pictogram-set, 6 pieces self-adhesive, waterproof 180 x 160 mm (HxW) Art.-No: 5408840

Stationary Waste separation 45, stationary

Colour selection:

Dimensions mm (HxWxD) Capacity in litre Insert Weight in kg

yellow red blue green light grey

640 x 330 x 310 45 self-closing insertion flaps 6,6

Art.-No: 630-045-0-0-103 630-045-0-0-300 630-045-0-0-510 630-045-0-0-624 630-045-0-0-735

Mobile Waste separation 45, mobile

Colour selection:

Dimensions mm (HxWxD) Capacity in litre Insertion Weight in kg

yellow red blue green light grey

715 x 330 x 310 45 self-closing insertion flaps 7,0

Art.-No: 630-045-2-0-103 630-045-2-0-300 630-045-2-0-510 630-045-2-0-624 630-045-2-0-735

www.arsam.es - b2b@arsam.es

Waste separation 65 -self-extinguishing-

Details

Waste separation 65 The sophisticated successor of the ‘Used-material centre’- the world‘s first coloured container for sepa­ rating waste in industrial trade and commerce at that time.

Detachable head element

Self-closing insertion flap

COLOUR SELECTION Body colours and insertion flap colours

Edge protection

Robust industry quality

www.arsam.es - b2b@arsam.es

Waste separation 65

Accessories

Areas of application and use

Product description

For use in all areas of the building, where eye-catching waste bins are desired.

The bins are made of fully galvanised quality sheet steel and high-quality textures achieved by powder-coating.

The head elements are detachable.

The insertion flaps close automatically by means of torsion springs and are therefore fire-resistant and odour-absorbing.

The galvanised steel insert has a capacity of 65 litres.

The embossing on the front of the 65 sorting system to improve stability is ideally suited to use for information or advertising signs.

The bin can be emptied by removing the container’s upper part.

Features: Eye-catching solid colours, robust industrial quality as standard with a galvanised inner container.

Stumpf standards

Dimensions:

Refuse bags Packaging unit: 250 pieces Art.-No: 5406620

970 x 400 x 380 mm (HxWxD)

Colour scheme: signal yellow RAL flame red RAL gentian blue RAL traffic green RAL light grey RAL

1003 3000 5010 6024 7035

TESTED

self-extinguishing

FIRE

Adhesive label „coloured“

Pictogram-set, 6 pieces self-adhesive, waterproof 180 x 160 mm (HxW) Art.-No: 5408840

Colour selection:

Art.-No:

Dimensions mm (HxWxD)

Waste separation 65 970 x 400 x 380

yellow

5401002

Capacity in litre

65

red

5401003

Insert

self-closing insertion flaps

blue

5401004

Weight in kg

15,8

green

5401006

light grey

5401007

3 compartment movable frame for the waste separation 65 Dimensions in mm 1070 x 1290 x 432 (HxWxD)

4 compartment movable frame for the waste separation 65 Dimensions in mm 1070 x 1690 x 432 (HxWxD)

Weight:

18.0 kg

Weight:

Art.-No:

5406203

Art.-No:

20.0 kg 5406204

www.arsam.es - b2b@arsam.es

Waste separation Flex - M

Details

Waste separation Flex-M Universal bin with extra large opening. Optional with holder for refuge bags or galvanised inner container.

Refuse bag holder

Rounded hood

COLOUR SCHEME Body colour

Magnetic lock

ProPads© for the insertion flaps

Guide rails

www.arsam.es - b2b@arsam.es

Waste separation Flex-M

Accessories

Areas of application and use

Product description

The Flex-M sorting system is provided with an extra large insertion flap for the most common container sizes.

The bins are made of fully galvanised quality sheet steel and a high-quality texture achieved by powder coating.

The extra large insertion flaps close automatically by means of torsion springs and are therefore fire-resistant and odourabsorbing.

Containers are optionally equipped with holding devices for refuse bags (removable steel frame with Flexband fixation) or galvanised inner containers (= self-extinguishing).

Capacity: 70 litres in each case.

The folding doors mounted on the front are locked with squareshaped locks in the containers (square keys are supplied).

To colour code the insertion flaps, a set with ProPads© (= protect-pads, highly robust, self-adhesive) in the colours blue, yellow and anthracite is enclosed with each bin. The user can thus decide on what identification colours the bin should have.

Two adjustable feet on the front compensate for uneven floors (level control).

The containers can also be retrofitted to mobile variants with the roller set no. 5407000.

The collectors can be retrofitted to mobile variants by separately ordering the roller set.

(Art.-No: 5407000)

Stumpf standards

Refuse bags

Dimensions mm (HxWxD): 1000 x 400 x 380 Colour scheme for the body: light grey RAL 7035 Colour scheme for the insertion flap: ProPads©

FIRE

Waste separation Flex-M, holder for refuse bags Dimensions mm (HxWxD) Capacity in litre Insert Weight in kg Colour for the body Colour for the insertion flaps

1000x400x380 70 self-closing insertion flap 16,6 light grey ProPads©

Art.-No:

Packaging unit: 250 pieces Art.-No: 5406620

Adhesive label „coloured“

Pictogram-set, 6 pieces self-adhesive, waterproof 180 x 160 mm (HxW) Art.-No: 5408840

Set of double rolls

660-075-0-1-200

made of fiberglass-reinforced polyamide, consisting of four double rollers, two of which are lockable and four threaded bolts.

Art.-No: 5407000

Waste separation Flex-M, galvanized inner container Dimensions mm (HxWxD) Capacity in litre Insert Weight in kg Colour for the body Colour for the insertion flaps

1000x400x380 70 self-closing insertion flap 19,8 light grey ProPads©

Waste separation Flex-M, 3 compartment station Insert Dimensions mm (HxWxD) 1000x1210x380 Weight in kg Capacity in litre 3 x 70 Colour for the body light grey Colour for the insertion flaps ProPads©

Art.-No: 660-075-0-2-200 ProPads , extra ©

Art.-No:

Art.-No:

refuse bags 660-075-3-1-200 44,0 kg

inner container 660-075-3-2-200 55,0 kg

• dusty blue RAL 5014, Art.-No: 0906514 • sand yellow RAL 1002, Art.-No: 0906102 • anthracite grey RAL 7016, Art.-No: 0906716 • pale green RAL 6021, Art.-No: 0906621 • coral red RAL 3016, Art.-No: 0906316 • clay brown RAL 8003, Art.-No: 0906803 • light grey RAL 7035, Art.-No: 0906735

www.arsam.es - b2b@arsam.es

Waste separation ProTec-Plus, 30 + 70 litre

Details

Waste separation ProTec-Plus Almost contact-free waste insertion from above.

Head elements in five different sorting colours.

Level control

Insertion possible without direct contact

COLOUR SELECTION Body colour

Optional as a mobile variant

Head element colours

Magnetic lock

www.arsam.es - b2b@arsam.es

Waste separation ProTec-Plus, single-use container

Accessories

Areas of application and use

Product description

Refuse bags

With ProTec - containers with the simplest waste insertion are guaranteed: The waste can be thrown in with nearly no container contact by means of the inward opening swing lid. The concept of waste separation and a corresponding identification by means of different colours is promoted by head elements in five eyecatching colours. Safety is also not neglected in the long run: The containers from the ProTec product line are all non-combustible.

The collectors can be retrofitted to mobile variants by separately ordering the roller set.

(Art.-No: 5407000)

The bins are made of fully galvanised quality sheet steel and a high-quality texture achieved by powder-coating. Both of the swing lids open downwards so that the waste can be thrown in with almost no contact.

The containers are fire resistant and odour-absorbing.

The inner containers are made of galvanised sheet steel.

The capacity is 30 or 70 litres in each case.

The inner containers are taken out through the folding doors lockable with square-shaped locks and mounted on the front (square keys are supplied). Two adjustable feet on the front compensate for uneven floors (level control).

If the collectors are to be used in a mobile basis, the existing levelling feet are removed and the separately ordered rollers are screwed into the existing threaded bushes.

Packaging unit: 250 pieces Capacity. 30 litre

Stumpf standards

In this case, the height of the containers changes by + 100 mm.

Capacity 30 L: Capacity 70 L:

600 x 300 x 300 mm (HxWxD) 850 x 400 x 380 mm (HxWxD)

Colour scheme for the body: grey aluminum structure

Art.-No: 5406621

Packaging unit: 250 pieces Capacity. 70 litre Art.-No: 5406620

Pictograms Ø 50 mm

Colour scheme for the head element: signal yellow RAL 1003, flame red RAL 3000, gentian blue RAL 5010, traffic green RAL 6024, anthracite grey RAL 7016

FIRE

5 pieces. White print on transparent film with symbols for paper, yellow-bag waste, non-processible waste, glass and organic waste.

Art.-No: 5407700

Waste separation ProTec-Plus, 30 L

head element:

Art.-No:

Dimensions mm (HxWxD) Capacity in litre Insert Weight in kg Colour for the body

greyalu/yellow greyalu/red greyalu/blue greyalu/green greyalu/anthracite

607-030-0-2-103 607-030-0-2-300 607-030-0-2-510 607-030-0-2-624 607-030-0-2-716

600 x 300 x 300 30 swing flaps opening inwards 11,0 grey aluminum structure

Pictograms Ø 70 mm

5 pieces. White print on transparent film with symbols for paper, yellow-bag waste, non-processible waste, glass and organic waste.

Art.-No: 5408812

Set of double rolls

Waste separation ProTec-Plus, 70 L

head element:

Art.-No:

Dimensions mm (HxWxD) Capacity in litre Insert Weight in kg Colour for the body

greyalu/yellow greyalu/red greyalu/blue greyalu/green greyalu/anthracite

607-070-0-2-103 607-070-0-2-300 607-070-0-2-510 607-070-0-2-624 607-070-0-2-716

850 x 400 x 380 70 swing flaps opening inwards 18,4 grey aluminum structure

made of fiberglass-reinforced polyamide, consisting of four double rollers, two of which are lockable and four threaded bolts.

Art.-No: 5407000

www.arsam.es - b2b@arsam.es

Waste separation ProTec-Plus - stations, stationary or mobile

Waste separation ProTec-Plus, 3 compartment stations, 3x30 litre Areas of application and use

Product description

The ProTec-Plus 3 stations contain containers with head elements for the most common waste groups (anthracite for residual waste, yellow for plastics/packaging and blue for paper). The stations can be used in all areas of a building and, thanks to the strikingly coloured head elements, are ideal for use wherever the idea of waste separation is to be supported by colour coding.

The bins are made of fully galvanised quality sheet steel and a high-quality texture achieved by powder-coating.

Both of the swing lids open downwards so that the waste can be thrown in with almost no contact.

The containers are fire resistant and odour-absorbing. The inner containers are made of galvanised sheet steel. The capacity is 3 x 30 bzw. 3 x 70 litres.

The inner containers are taken out through the folding doors lockable with squareshaped locks and mounted on the front (square keys are supplied).

Two adjustable feet on the front compensate for uneven floors (level control).

This 3-station can be retrofitted to a mobile station by separately ordering two roller sets (Art.-No: 5407000). Then the station height is 700 mm.

Stumpf standards

Colour scheme for the body:

grey aluminum structure

Colour scheme for the head element: signal yellow RAL 1003 gentian blue RAL 5010 anthracite grey RAL 7016

FIRE

Waste separation ProTec-Plus, 3 x 30 litre stationary and mobile Dimensions mm (HxWxD) 600 x 910 x 300 Capacity in litre 3 x 30 Insert galvanized sheet steele Weight in kg 33,0 Colours for the head element grey aluminum structure/blue, yellow, anthracite

Art.-No: 607-030-0-2-030

Waste separation ProTec-Plus, 3 x 70 litre stationary and mobile Dimensions mm (HxWxD) 850 x 1210 x 380 Capacity in litre 3 x 70 Insert galvanized sheet steele Weight in kg 55,2 Colours for the head element grey aluminum structure/blue, yellow, anthracite

Art.-No: 607-070-0-2-030

Mobile with roller set as accessory Roller set made of fiberglass-reinforced polyamide, consisting of four double rollers, two of which are lockable and four threaded bolts.

If the collectors are to be mobile, the existing levelling feet are removed and the rollers are screwed into the existing threaded bushes.

Art.-No: 5407000

Waste separation ProTec-Plus Waste separation ProTec-Plus as 3-row in-line stations, stationary or mobile.

COLOUR SCHEME Body colour

Head element colours

www.arsam.es - b2b@arsam.es

Waste separation ProTec-Plus, island stations, 4x70 litre

Accessories

Areas of application and use

Product description

Refuse bags

This disposal island contains four ProTec-Plus waste collectors with coloured head elements for the most common waste groups (anthracite for non-recyclable waste, yellow for plastics/packaging, blue for paper and green for glass or organic waste).

The islands are particularly suitable for setting up in building areas where many people come together such as lounges and rest rooms, canteens or atria.

The islands are placed so that they are accessible from all sides.

For manageable spaces, the island offers a capacity of 4 x 30 litres, while for larger rooms, the islands with 4 x 70 litres are recommend.

The bins are made of fully galvanised quality sheet steel and a high-quality texture achieved by powder-coating.

Both of the swing lids open downwards so that the waste can be thrown in with almost no contact.

The containers are fire resistant and odour-absorbing.

The inner containers are made of galvanised sheet steel.

The capacity is 4 x 30 bzw. 4 x 70 litres.

The inner containers are taken out through the folding doors lockable with square-shaped locks and mounted on the front (square keys are supplied).

Two adjustable feet on the front compensate for uneven floors (level control).

Packaging unit: 250 pieces Capacity. 30 litre

Colour scheme for the body:

Art.-No: 5406621

Packaging unit: 250 pieces Capacity. 70 litre Art.-No: 5406620

grey aluminum structure

Colour scheme for the head element: signal yellow RAL gentian blue RAL traffic green RAL anthracite grey RAL

1003 5010 6024 7016

Waste separation ProTec-Plus, island station, 4 x 30 litre Art.-No: Dimensions mm (HxWxD) 600 x 610 x 610 607-030-0-2-040 Capacity in litre 4 x 30 Insert galvanized sheet steele Weight in kg 44,0 Colours for the head element grey aluminum structure/blue, yellow, anthracite, green

Pictograms Ø 50 mm

5 pieces. White print on transparent film with symbols for paper, yellow-bag waste, non-processible waste, glass and organic waste.

Art.-No: 5407700

Pictograms Ø 70 mm

Waste separation ProTec-Plus, island station, 4 x 70 litre Art.-No: Dimensions mm (HxWxD) 860 x 810 x 770 607-070-0-2-040 Capacity in litre 4 x 70 Insert galvanized sheet steele 73,6 Weight in kg Colours for the head element grey aluminum structure/blue, yellow, anthracite, green

5 pieces. White print on transparent film with symbols for paper, yellow-bag waste, non-processible waste, glass and organic waste.

Art.-No: 5408812

Set of double rolls

Waste separation ProTec-Plus Waste separation ProTec-Plus: 4-fold disposal islands for free-standing placement in all building areas

COLOUR SCHEME Body colour

Head element colours

made of fiberglass-reinforced polyamide, consisting of four double rollers, two of which are lockable and four threaded bolts.

Art.-No: 5407000

www.arsam.es - b2b@arsam.es

Waste separation Modul-Vario with manual operation

Noiseless closing

Mobile with roller set as accessory Roller set made of fiberglass-reinforced polyamide, consisting of four double rollers, two of which are lockable and four threaded bolts.

If the collectors are to be mobile, the existing levelling feet are removed and the rollers are screwed into the existing threaded bushes.

Art.-No: 5407000

Waste separation Modul-Vario manual operation The flap closes by means of delayed and noiseless gas spring.

The containers are fire and odour resistant and equipped with ProSlideŠsystem or galvanised inner containers.

COLOUR SCHEME Body colour

ProPadsŠ for the insertion flaps

www.arsam.es - b2b@arsam.es

Areas of application and use

Product description

Accessories

The containers are suitable for all areas of a building, halls, shops and the like.

The opening flap is opened by hand, the closure is automatic and noiseless due to the use of gas pressure springs.

The rounded container tops avoids the unwanted depositing of objects. © Each container comes with a set ProPads to mark the flap in anthracite, blue, yellow and green. © ProPads in other colours are available as accessories.

The collectors are made of fully galvanised quality steel sheet and in a high quality structured powder coating. The flap closes by means of delayed and noiseless gas pressure spring. The containers are fire and odour resistantand equipped with © ProSlide system or galvanised inner containers.

ProSlide©-System: A retractable receptacle for waste bags on telescopic rails for fast and convenient exchange of trays. An elastic strap ensures that the bag is fixed.

Galvanised inner container: Are sealed in the bottom area to prevent the escape of liquids. Collectors with inner containers have been tested as self-extinguishing.

The storage capacity is 45, 60, 75 or 120 litres.

Bags and inner containers are removed through a hinged door which can be locked on the front and closed with a square lock (square key included). © For colour coding of the flap, each collector is accompanied by a set of ProPads (= protect-pads, high-strength, self-adhesive) in the colons blue, yellow, green and anthracite.

The user can therefore decide which marking colour the collector should have.

On the front, two levelling feet provide compensation for unevenness.

The container can be retrofitted to mobile variants by separately ordering the roller set (Art.-No: 5407000) . The container height then increases by 100 mm.

Refuse bags

With the separately ordered roller set, each container can be retrofitted into a mobile waste bin - even retrospectively.

Colour scheme for the body:

Packaging unit: 250 pieces Refuse bags for 45, 60 and 75 litre containers Art.-No: 5406620

Packaging unit: 250 pieces Refuse bags for 120 litre container Art.-No: 5406619

grey aluminum structure ©

Colour scheme for the head element: ProPads

Adhesive label „coloured“

With ProSlide®-System

Pictogram-set, 6 pieces self-adhesive, waterproof 180 x 160 mm (HxW) Art.-No: 5408840

Waste separation Modul-Vario, ProSlide, Manual operation

Waste separation Modul-Vario, ProSlide, Manual operation

Waste separation Modul-Vario, ProSlide, Manual operation

Waste separation Modul-Vario, ProSlide, Manual operation

Dim. mm (HxWxD): 800 x 400 x 380

Dim. mm (HxWxD): 900 x 400 x 380

Dim. mm (HxWxD): 1000 x 400 x 380

Dim. mm (HxWxD): 1100 x 450 x 450

Capacity in litre:

45

Capacity in litre:

60

Capacity in litre:

75

Capacity in litre:

120

Art.-No:

625-045-0-1-100

Art.-No:

625-060-0-1-100

Art.-No:

625-075-0-1-100

Art.-No:

625-120-0-1-100

With galvanized inner container Set of double rolls

Waste separation Modul-Vario, inner container Manual operation

Waste separation Modul-Vario, inner container Manual operation

Waste separation Modul-Vario, inner container Manual operation

Waste separation Modul-Vario, inner container Manual operation

Dim. mm (HxWxD): 800 x 400 x 380

Dim. mm (HxWxD): 900 x 400 x 380

Dim. mm (HxWxD): 1000 x 400 x 380

Dim. mm (HxWxD): 1100 x 450 x 450

Capacity in litre:

45

Capacity in litre:

60

Capacity in litre:

75

Capacity in litre:

120

Art.-No:

625-045-0-2-100

Art.-No:

625-060-0-2-100

Art.-No:

625-075-0-2-100

Art.-No:

625-120-0-2-100

made of fiberglass-reinforced polyamide, consisting of four double rollers, two of which are lockable and four threaded bolts.

Art.-No: 5407000

www.arsam.es - b2b@arsam.es

Waste separation Modul-Vario with foot pedal

Mobile with roller set as accessory Roller set made of fiberglass-reinforced polyamide, consisting of four double rollers, two of which are lockable and four threaded bolts.

If the collectors are to be mobile, the existing levelling feet are removed and the rollers are screwed into the existing threaded bushes.

Art.-No: 5407000

Waste separation Modul-Vario with foot pedal

COLOUR SCHEME Body colour

ProPadsŠ for the insertion flaps

Variety with pedal: All 32 container variants open by foot operation via a pedal lever.

www.arsam.es - b2b@arsam.es

Areas of application and use

Product description

Accessories

The containers are suitable for all areas of a building, halls, shops and the like.

The flap is opened by operating the pedal, which means the flap does not need to be touched.

Closure takes place automatically and silently by the use of gas springs.

Due to the rounded container tops, the unwanted depositing of objects is avoided. © Each container comes with a set ProPads to mark the flap in anthracite, blue, yellow and green. © ProPads in other colours are available as accessories.

The collectors are made of fully galvanised quality steel sheet and in a high quality structured powder coating.

The flap opens by operation of the pedal lever made of stainless steel and closes by means of a delayed and noiseless gas spring. © The containers are fire and odour resistantand equipped with ProSlide system or galvanised inner containers.

Refuse bags

ProSlide©-System: A retractable receptacle for waste bags on telescopic rails for fast and convenient exchange of trays. An elastic strap ensures that the bag is fixed.

Galvanised inner container: Are sealed in the bottom area to prevent the escape of liquids. Collectors with inner containers have been tested as self-extinguishing.

The storage capacity is 45, 60, 75 or 120 litres.

Bags and inner containers are removed through a hinged door which can be locked on the front and closed with a square lock (square key included). © For colour coding of the flap, each collector is accompanied by a set of ProPads (= protect-pads, high-strength, self-adhesive) in the colons blue, yellow, green and anthracite.

Therefore the user can decide which marking colour the collectors should have.

On the front, two levelling feet provide compensation for unevenness.

With the separately ordered roller set, each container can be retrofitted into a mobile waste bin - even retrospectively.

The container can be retrofitted to mobile variants by separately ordering the roller set (Art.-No: 5407000). The container height then increases by 100 mm.

Colour scheme for the body: grey aluminum structure Colour scheme for the head element: ProPads©

Packaging unit: 250 pieces Refuse bags for 45, 60 and 75 litre containers Art.-No: 5406620

Packaging unit: 250 pieces Refuse bags for 120 litre container Art.-No: 5406619

Adhesive label „coloured“

With ProSlide®-System and foot pedal Pictogram-set, 6 pieces self-adhesive, waterproof 180 x 160 mm (HxW) Art.-No: 5408840

Set of double rolls

Waste separation Modul-Vario, ProSlide, With foot pedal

Waste separation Modul-Vario, ProSlide, With foot pedal

Waste separation Modul-Vario, ProSlide, With foot pedal

Waste separation Modul-Vario, ProSlide, With foot pedal

Dim. mm (HxWxD): 800 x 400 x 380

Dim. mm (HxWxD): 900 x 400 x 380

Dim. mm (HxWxD): 1000 x 400 x 380

Dim. mm (HxWxD): 1100 x 450 x 450

Capacity in litre:

45

Capacity in litre:

60

Capacity in litre:

75

Capacity in litre:

120

Art.-No:

625-045-1-1-100

Art.-No:

625-060-1-1-100

Art.-No:

625-075-1-1-100

Art.-No:

625-120-1-1-100

made of fiberglass-reinforced polyamide, consisting of four double rollers, two of which are lockable and four threaded bolts.

Art.-No: 5407000

ProPads , extra ©

With galvanized inner container and foot pedal

Waste separation Modul-Vario, inner container With foot pedal

Waste separation Modul-Vario, inner container With foot pedal

Waste separation Modul-Vario, inner container With foot pedal

Waste separation Modul-Vario, inner container With foot pedal

Dim. mm (HxWxD): 800 x 400 x 380

Dim. mm (HxWxD): 900 x 400 x 380

Dim. mm (HxWxD): 1000 x 400 x 380

Dim. mm (HxWxD): 1100 x 450 x 450

Capacity in litre:

45

Capacity in litre:

60

Capacity in litre:

75

Capacity in litre:

120

Art.-No:

625-045-1-2-100

Art.-No:

625-060-1-2-100

Art.-No:

625-075-1-2-100

Art.-No:

625-120-1-2-100

• dusty blue RAL 5014, Art.-No: 0905514 • sand yellow RAL 1002, Art.-No: 0905102 • anthracite grey RAL 7016, Art.-No: 0905716 • pale green RAL 6021, Art.-No: 0905621 • coral red RAL 3016, Art.-No: 0905316 • clay brown RAL 8003, Art.-No: 0905803 • light grey RAL 7035, Art.-No: 0905703

www.arsam.es - b2b@arsam.es

Waste separation PWK

Details

Waste separation PWK Today, the classic fire protection system for easily flammable waste materials is also used as a universal bin because of its low price and its safety-specific properties.

Swing lid

Recessed grip

COLOUR SELECTION Body colours

Stable container feet

Swing lid colours

Detachable head element

www.arsam.es - b2b@arsam.es

Waste separation PWK

Accessories

Areas of application and use

Product description

These containers are now used in all building areas.

The bins are made of fully galvanised quality sheet steel and a high-quality texture achieved by powder-coating.

The head elements are detachable.

Self-closing swing lids, fire resistant and odour-absorbing.

The containers are used both as a classic „lint boxes“ or as waste bins.

Two recessed grips mounted on the sides of each container simplify handling.

The capacity is 73 litres in each case.

The ‘PWK’ is designed for universal use due to its swing lid and tested self-extinguishing properties.

This mainly made him popular as a „Paper bin“.

Refuse bags Packaging unit: 250 pieces Art.-No: 5406620

Dimensions: 680 x 400 x 400 mm (HxWxD) Colour scheme for the body:

Stumpf standards TESTED

self-extinguishing

flame red RAL 3000 light grey RAL 7035

Colour scheme for the swing flap: flame red RAL 3000 gentian blue RAL 5010

FIRE

Waste separation PWK,

grey/blue

Art.-No:

Dimensions mm (HxWxD) Capacity in litre Insert Weight in kg Colour

680 x 400 x 400 73 self-closing swing lid 8,6 kg light grey

5101002

Adhesive label „coloured“

Pictogram-set, 6 pieces self-adhesive, waterproof 180 x 160 mm (HxW) Art.-No: 5408840

Waste separation PWK,

red

Art.-No:

Dimensions mm (HxWxD) Capacity in litre Insert Weight in kg Colour

680 x 400 x 400 73 self-closing swing lid 8,6 kg flame red

5101003

www.arsam.es - b2b@arsam.es

Waste separation ABF 

Details

Waste separation ABF Proven successful in tough day-to-day industrial operation: The classic option with two self-closing insertion flaps.

Detachable hood

Double opening

COLOUR SELECTION Body colours

Stable container feet

Insertion flap colours

Handles

www.arsam.es - b2b@arsam.es

Waste separation ABF

Accessories

Areas of application and use

Product description

These containers are classics and an indispensable part of industrial applications.

The bins are made of fully galvanised quality sheet steel and a high-quality texture achieved by powder-coating.

The head elements are detachable.

The bins are equipped with two self-closing insertion flaps lying opposite to each other and are fire-resistant and odour-absorbing.

Each container has a galvanised steel insert with a capacity of 95 litres.

Drop handles attached to the sides for optimum handling.

The two self-closing insertion flaps lying opposite to each other are a distinct feature of these bins.

In recent years, they have also been used more and more by non-industrial target groups, who appreciate the benefits of these containers.

Stumpf standards

Refuse bags Packaging unit: 250 pieces Art.-No: 5406619

Dimensions mm (HxWxD): 870 x 450 x 450

TESTED

self-extinguishing

Colour scheme for the body: signal yellow RAL 1003 white aluminum coarse structure Colour scheme for the insertion flap:

FIRE

Waste separation ABF model 1

signal yellow RAL 1003 white aluminum coarse structure

colour selection:

Dimensions mm (HxWxD) 870 x 450 x 450 yellow white aluminum Capacity in litre 95 Insertion insertion flaps lying opposite to each other Weight in kg 22,0 kg Colours signal yellow or white aluminum coarse structure

Art.-No: 5301001 5301008 Adhesive label „coloured“

Pictogram-set, 6 pieces self-adhesive, waterproof 180 x 160 mm (HxW) Art.-No: 5408840

Waste separation ABF model 2

colour selection:

Art.-No:

Dimensions mm (HxWxD) 870 x 450 x 450

yellow

5301101

Capacity in litre

80

white aluminum

5301108

Insertion

can be taken out at the front

Weight in kg Colours

22,0 kg signal yellow or white aluminum coarse structure

www.arsam.es - b2b@arsam.es

Bin liner stands

Details

Bin liner stands In cases where waste separation has to be as inexpensive as possible.

Stability by means of a square pipe

Clamping ring, powder-coated

COLOUR SELECTION Bracket colours

Floor grilles, galvanised

Cover colours

Plastic lids

www.arsam.es - b2b@arsam.es

Bin liner stands

Accessories

Areas of application and use

Product description

These high quality recyclable material bins are sturdy, stable and guarantee the highest quality for everyday use.

In addition, they ensure efficient recycling and thus make an important contribution to effective environmental protection.

Let us convince you of the versatility of our product range so that you can take advantage of first-class products.

570851x, stationary bin 5708520, stationary bin • 3-piece, pluggable • Upper part including lid and powder-coated clamping ring • Stands made of square pipe 40x40 mm and 35x35 mm • Part of the foot made of round pipe Ø 18 mm, including four plastic caps • Head and foot element can be bolted with star bolts • Delivery including two star bolts M6 and a refuse bag 120 L

Stumpf standards

Bin liner stands, stationary Dimensions in mm (HxWxD) 1000 x 425 x 525 Capacity in litre 70-120 Insert opening Ø mm 315 Design galvanised Weight in kg 5,2

5708161

5708162

Packaging unit: 250 pieces Art.-No: 5406619

5708160, stationary bin • Tripod frame and clamping ring, hot-dip galvanised. Stackable 5708161, mobile bin • with three high quality industrial swivel casters 5708162, floor grille to stabilise the refuse bag suitable for 5708160 and 5708161 5708960,mobile bin • Head element including lid and powder-coated clamping ring • Stands made of round pipe • Foot element including two plastic caps • Two star bolts M8 and a refuse bag 120 L are included in the delivery

Bin liner stands, stationary Dimensions in mm (HxWxD) 985 x 425 x 525 Capacity in litre 70-120 Insert opening Ø mm 315 Design galvanised Weight in kg 4.3

5708160

Refuse bags

plastic lid black yellow blue green

Art.-No: 5708510 5708511 5708512 5708513

lid galvanised sheet steel

Art.-No: 5708520

Bin liner stands, stationary+mobile Weight Design Art.-No: Dimensions in mm (HxWxD) 920 x 545 x 545 8,0 stationary 5708160 Capacity in litre 70-120 9,0 mobile 5708161 Insert opening Ø mm 380 1.0 Floor grille 5708162 Design hot-dip galvanised lid galvanised sheet steel

Bin liner stands, mobile Dimensions in mm (HxWxD) 975 x 435 x 515 Capacity in litre 70-120 Insert opening Ø mm 315 Design hot-dip galvanised Weight in kg 5.0

plastic lid black

Art.-No: 5708960

www.arsam.es - b2b@arsam.es