Deprag Industrial General - ARSAM

Pneumatic Power Tools

Screwdriving technology

Automation

Air motors

Air tools

DCZ 14 2.2019

OVERVIEW About us

Page 3

PNEUMATIC TOOLS DEPRAG INDUSTRIAL END-OF ARM-TOOLING FOR GRINDING AND POLISHING Deprag Grinding System (DGS), stationary grinder

Page 4

SMART FACTORY - INDUSTRY 4.0 Intelligent Tools DEPRAG INDUSTRIAL

Page 5

GRINDERS Die grinders - inline design/angle-head design - Model GDS, PB, GDA, GDB

Page 6-10

Straight grinders - Model GS, GST

Page 11

Angle grinders - with direct drive/with angle gear - Model GA(T), PBU

Page 12/13

Belt sanders - Model GB

Page 14

AIR VANE MOTORS FOR GRINDING, MILLING AND DRILLING Stationary grinders, milling tools and drills for special applications

Page 15

POLISHERS Polishers - pistolgrip/angle-head form - Model PLU, PA(T), PLP

Page 16

Polishers - radial polisher/orbital sander - Model PS, PLUE, PAE

Page 17

DRILLS Inline design - Model DS

Page 18

Angle-head design - Model DA, DC

Page 19

Pistolgrip - Model DP, PV(R)

Page 20

TAPPERS Tappers - inline design/pistolgrip - Model DS, DP

Page 21

IMPACT TOOLS / SCREWDRIVER Impact tools - Model SMS, SMP, PSR; screwdriver - inline design, reversible - Model PRU

Page 22

HAMMERS Chipping and riveting hammers - Model HC, HCD

Page 23

Pick hammers - Model HP

Page 24

Breaking (Spade) hammers - Model HB

Page 24

Impact hammers - Model HR

Page 24

Scaler - Model HS

Page 24

NEEDLE SCALERS Needle scalers - inline design/pistolgrip - Model SN

Page 25

SHEET METAL TOOLS Metal shears - Model S

Page 26

PLIERS Pliers for cutting - Model P

Page 27/28

Pliers for mounting of CLIC, COBRA, hose or spring clamps - Model P

Page 29

SAWS Straight (jig) saws - type PPP, SS; chain saw - Model SH

Page 30

TOOLS FOR USE IN POTENTIALLY EXPLOSIVE ENVIRONMENTS Impact tools - inline design/pistolgrip - Model SMS, SMP;

Page 31

Drill - Model DP(T)

Page 31

Chain saw - Model SH

Page 31

OTHER PNEUMATIC TOOLS

2

Files - Model FS, Special Solutions - Assembly tool for mounting of plastic rivets

Page 32

ACCESSORIES, MAINTENANCE & SERVICE OF PNEUMATIC TOOLS

Page 33

ADVANTAGES OF PNEUMATIC POWER TOOLS, APPLICATIONS

Page 34/35

OPERATING CONDITIONS FOR THE USE OF AIR TOOLS

Page 36

RULES OF CONNECTING AIR TOOLS TO AN AIR DISTRIBUTION GRID

Page 37

TYPE KAY

Page 38/39



Since 1998, DEPRAG CZ a.s. in Lázně Bělohrad is a daughter company of DEPRAG SCHULZ GMBH u. CO. Amberg, a worldwide leader in the production of air-operated tools, screwdriving- and assembly equipment, as well as automation.



Screwdriving Technology

Automation

Our Products - Tools and solutions from a specialist We provide superior technology in all product areas. Our screwdriving technology solutions benefit from the extreme torque accuracy of our shut-off clutch and the renowned robust and reliable design of all our screwdrivers. Screwdriving perfection is our guiding principle and we command undisputed market leadership in many applications.

Our experience in assembly technology has enabled us to develop first-class solutions. Countless DEPRAG products, such as measuring instruments, controllers and in particular the successful feeding technology, are utilised in our customers' applications. In conjunction with the long-standing experience of our project engineers, we produce assembly machines for a wide variety of client requirements.

Air motors

Today as ever, air motors are of utmost importance as a drive element for machines and equipment.

As market leader in this field we provide an extremely versatile programme for the most varied of applications from the food industry to medical technology.

Air Tools

Professional industrial tools such as grinding and polishing machines, drills, hammers, pliers and sheet metal tools are the roots of our company. High performance, reliability and outstanding ergonomic design are the distinguishing characteristics of DEPRAG INDUSTRIAL tools.

NEW NEW

Deprag Grinding System (DGS) Intuitive and adaptive robotic grinding SMART FACTORY - INDUSTRY 4.0 Intelligent Tools DEPRAG INDUSTRIAL

 Since March 12, 2004, DEPRAG CZ is ISO 9001 certified.  We utilize the most modern production machinery and continuously expand the education of our employees, which results in improved product quality.

 Our main objective is to offer solutions to our customers.  Our customers can expect outstanding product quality, precision and longevity.

DEPRAG CZ a.s. is an innovative manufacturer of professional industrial tools such as grinders, drills, tappers, hammers, needle scalers, pliers, sheet metal tools, ATEX-certified tools for use in potentially explosive environments and other air tools.

As an industrial user you require excellence in the air tools you use. DEPRAG CZ a.s. offers classic air tools under the brand name DEPRAG INDUSTRIAL for almost any application case. Some of the applications can be found for example in the mining, oil- and gas industry, foundries, automotive industry, machine building, steel industry, ship building or in the aviation industry.

DEPRAG CZ a.s. carries specially adapted tools that perfectly fit your particular application and that are part of our standard assortment. Please contact one of our product specialists if you require help in finding a suitable tool.

machines unlimited DEPRAG CZ a.s.

T. G. Masaryka 113 507 81 Lázně Bělohrad Tel.: +420-493 771 511 Fax: +420-493 771 623 Email: sales@deprag.cz www.deprag.cz www.deprag.com 3

robotic grinding and polishing

Intuitive and adaptive robotic grinding The DEPRAG Grinding System consists of the End-of-Arm tooling with electronic control for the axial press force. This product is designed for the robotic grinding and polishing in all industrial applications where it is necessary to automate laborintensive manual fabrication tasks. By electronically compensating the gravity of every position of the End-of-Arm tooling, we can ensure a constant grinding force that is needed for achieving the necessary quality of the fabricated surface while guaranteeing the highest possible process reliability.    

Simple adjustment of the constant press force Possibility to turn the End-of-Arm tooling on its flange by (-45°) – (0°) – (45°) – (90°) Visual signalization of tooling status Designed for 24/7 operations

Tool head RMA

Model Part No.

RMA050-300B 6061371B

RMA070-230B 6061371A

RMA070-190B

RMA100-190B 6061371C

Current and detailed information about our newly developed DGS, may be found our catalogs DCZ 10920, as well as on our website www.deprag.cz.

End-of Arm-Tooling for Grinding and Polishing End-of Arm-Tooling for Grinding and Polishing Would you like to increase the efficiency and productivity of your production?

Do you have a high waste rate in your production?

Are you thinking about installing a robot to your production in order to lower your costs?

DEPRAG CZ a.s offers: • independent consultation in your facilities and evaluation of the possibility to use an industrial robot for grinding and polishing applications • price quotation including a 3-D model • selection and testing of all components for optimum grinding or polishing results • complete engineering services incl. design, production, assembly and integration to your production process

DEPRAG CZ a.s. - Your Partner for Grinding Technology Automotive Industry / Machine Building / Aircraft Industry / Foundries Paint Shop / Welding Shop

10 Good Reasons to Invest in Robots           4

Reduced operating costs Improved product quality and consistency Improved quality of work for employees Increased production output rates Increased product manufacturing flexibility Reduced waste and increased yield Improved workplace health and safety Reduced turnover and recruitment difficulty Reduced capital costs Save space in manufacturing areas

SMART FACTORY - INDUSTRY 4.0: Intelligent Tools deprag industrial

Air-Operated Angle Grinders DIQ

SMART FACTORY - INDUSTRY 4.0 Intelligent Tools deprag industrial Model

Part No.

Power output

Speed I.D. of air (no load) inlet hose

Weight without air connection

Max. Ø of grinding disk O.D. / I.D.

Max. Max. thickness cutting of grinding depth disk

min1 kW (hp) (rpm) mm (in) kg (lbs) mm (in) mm (in) The design series of the grinders GAQ originates from the Grinder series GA 1,9 kW and 2,5 kW. GAQ812-190BX 6061275E 19 000 11 900 16 3,1 125/22,23 6 GAQ815-190BX 6061275F 19 000 9 850 16 3,1 150/22,23 6 GAQ818-190BX 6061275G 19 000 8 350 16 3,3 180/22,23 8 GAQ823-190BX 6061275H 19 000 6 650 16 3,6 230/22,23 8 GAQ818-250BX 6060970D 25 000 6 640 16 4,4 180/22,23 8 GAQ823-250BX 6060971D 25 000 8 500 16 4,7 230/22,23 8

Max. radial speed

mm (in)

m/s

30,5 43 58 83 54 79

80 80 80 80 80 80

Spindle thread

GAQ 818-190BX

M14 M14 M14 M14 M14 M14

GAQ 823-250BX

Specifications at 90 psi (6,3 bar)

The developments of the 4th Industrial Revolution, Industry 4.0 / Smart Factory, now also applies to some of the DEPRAG INDUSTRIAL air-grinders.

Those grinders are equipped with the revolutionary DIQ-technology that allows to continuously evaluate the current operating conditions of the tool!

All data is acquired during the actual work flow; it is continuously evaluated and stored on the web.

By utilizing a special IQRF Network - it operates in the frequency range of 868 MHz - the acquired data is made available via wireless output. The transfer takes place by a Gateway into the LAN/Internet and the data is stored in the DEPRAG Cloud.

Internet

 Access to technical documentation  The tool and the operating process is continuously supervised  Optimal use of the tool to achieve maximum effectiveness  Possibility to obtain recommendations for best-suitable tool fitting any given application  Compare different tools and/or operators  Access data about air-consumption for improved production planning  Optimization and effectiveness recommendation (for example grinding speed, tool load)  Exact control of the service intervals; overview of individual repair expenditures  Uptime of the tool  Energy-saving = cost-saving Software packages

Gateway

Protective cover

ACCESSORIES The principle of the data transfer, including communication:

Thanks to the DIQ-technology, important and clear operational information is obtained, which is necessary for the optimization of the production process and the increase of its effectiveness. Lowering production-cost is crucial in this day and age, not only for the price of a product, but also for the profitability of a manufacturer.

Current and detailed information about our newly developed DIQ technology, software-application and DIQ angle grinders may be found our catalogs DCZ 10323, as well as on our website www.deprag.cz.

5

DIE GRINDERS - Inline Design, Power Output 90 - 300 W (.12 - .4 HP) Die grinders - inline design - for the grinding with grinding tips

- for the milling with grinding inserts (carbide cutters) Model

Part No.

Power output kW (hp)

Top-Speed-Grinder GDS009-1000BY

GDS011-550BY

GDS011-650BYE

GDS015-470SX

GDST025-700BY

GDS027-320BY

GDS030-180BXE

GDS030-300BY

GDS030-450SY

6

Speed (no load)

I.D. of air inlet hose

Weight Max. Ø Max. Ø Collet - clamping range without air of grinding of grinding Collet - standard equipment connection tip insert [optional accessories*]

min-1 (rpm) mm (in) kg (lbs) mm (in) mm (in) mm 90 W (.12 hp) Grinding and milling at actual speed of 100.000 rpm. This ergonomic miniature grinder allows easy and optimum access on hard-toreach areas. The high run-out accuracy of the collets assure a high durability, an optimum material removal, and a high surface quality during grinding or milling. This grinder operates at an extreme low vibration. Oilfree operation without loss of power is possible.

GDS009-1000BY 3146441E 0,09 (.12) 100 000 4 (.16) 0,3 (.66) 5 (.20) 3 (.12) 3 [1 - 3,25] 110 - 150 W (.15 - .2 hp) Grinding, milling, fabricating of casted parts or when used for precision operations when polishing and deburring of welding seams, the use of these small and light-weight grinders simplify any fabricating job. Vane motor.

GDS011-550BY 831050A 0,11 (.15) 55 000 5 (.20) 0,1 (.22) 10 (.39) 3 (.12) 3 [2; 3,25; 3/32; 1/8“] GDS011-650BYE 6061249A 0,11 (.15) 65 000 6 (.24) 0,3 (.66) 10 (.39) 3 (.12) 3 [2; 3,25; 3/32; 1/8“] GDS013-720BX 830266B 0,13 (.17) 72 000 5 (.20) 0,3 (.66) 10 (.39) 3 (.12) 3 [2; 3,25; 3/32; 1/8“] GDS013-720BY 830266A 0,13 (.17) 72 000 5 (.20) 0,3 (.66) 10 (.39) 3 (.12) 3 [2; 3,25; 3/32; 1/8“] GDS015-470SX 3147401E 0,15 (.20) 47 000 6 (.24) 0,3 (.66) 16 (.63) 6 (.24) 6 [3; 4; 5; 6; 1/8"; 1/4"] GDS015-470SY 3147401D 0,15 (.20) 47 000 6 (.24) 0,3 (.66) 16 (.63) 6 (.24) 6 [3; 4; 5; 6; 1/8"; 1/4"] 250 W (.34 hp) Our turbine grinders operate oilfree. The low weight assures a fatigue-free operation. The inserted grinding tip or carbide cutter can be used with this pneumatic tool by using its full power and speed. These grinders are especially suited for the precision grinding and milling in the tool-, die-, and mold making- or in small industrial areas. An integrated, automatic brake (Model GDST 025-700BY) eliminates any trailing of the grinding spindle. The type GDST 025-700BYO ist without brake. Integrated speed regulator. Lower levels of vibration- and noise emissions compared to standard air-grinders. Your advantage: Extreme low air consumption.

GDST025-700BY 6060839A 0,25 (.34) 70 000 6 (.24) 0,3 (.66) 13 (.51) 6 (.24) 3; 6 [4; 5; 1/8“; 3/16“; 1/4“] 270 W (.36 hp) Small grinders for the precision grinding and milling. Ergonomical, low-weight and suitable for numerous application cases - in the tool-, die-, and mold making- or in small industrial areas. Air-exhaust located on the rear and/or partial frontal exhaust. Vane motor.

GDS027-320BX 3148457D 0,27 (.36) 32 000 6 (.24) 0,4 (.88) 25 (.98) 10 (.39) 6 [3; 4; 5; 6; 1/8“; 1/4“] GDS027-320BY 3148457C 0,27 (.36) 32 000 6 (.24) 0,4 (.88) 25 (.98) 10 (.39) 6 [3; 4; 5; 6; 1/8“; 1/4“] GDS027-320BXF 3148457G 0,27 (.36) 32 000 6 (.24) 0,6 (1.32) 25 (.98) 10 (.39) 6 [3; 4; 5; 6; 1/8“; 1/4“] GDS027-320BYF 3148457F 0,27 (.36) 32 000 6 (.24) 0,5 (1.10) 25 (.98) 10 (.39) 6 [3; 4; 5; 6; 1/8“; 1/4“] GDS027-320SX 3148457B 0,27 (.36) 32 000 6 (.24) 0,3 (.66) 25 (.98) 10 (.39) 6 [3; 4; 5; 6; 1/8“; 1/4“] GDS027-320SY 3148457A 0,27 (.36) 32 000 6 (.24) 0,3 (.66) 25 (.98) 10 (.39) 6 [3; 4; 5; 6; 1/8“; 1/4“] 300 W (.4 hp) For the manual, peripheral- and transverse grinding with grinding tips and when fabricating with carbide cutters. Especially well-suited for the grinding in cavities and hard-to-reach casted areas, these grinders are equipped with a reduced shank (execution V).

The centrifugal speed- regulator reduces a speed overload and assures an economical operation (Models GDS 030-120/150/200/230BX/BY, VX/VY). Vane motor.

GDS030-120BX 6060854A 0,3 (.4) 12 000 8 (.31) 0,4 (.88) 20 (.79) 10 (.39) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] GDS030-120BY 6060853A 0,3 (.4) 12 000 8 (.31) 0,4 (.88) 20 (.79) 10 (.39) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] GDS030-150BX 6060850A 0,3 (.4) 15 000 8 (.31) 0,4 (.88) 20 (.79) 10 (.39) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] GDS030-150BY 6060849A 0,3 (.4) 15 000 8 (.31) 0,4 (.88) 20 (.79) 10 (.39) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] GDS030-180BXE 6061300A 0,3 (.4) 18 000 6 (.24) 0,4 (.88) 20 (.79) 10 (.39) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] GDS030-180BXE-8I 6061300C 0,3 (.4) 18 000 8 (.31) 0,5 (1.10) 25 (.98) 12 (.47) 6 [8; 9; 3/16“; 5/16“; 1/4“] GDS030-200BX 6060560A 0,3 (.4) 20 000 8 (.31) 0,4 (.88) 20 (.79) 10 (.39) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] GDS030-200BY 6060559A 0,3 (.4) 20 000 8 (.31) 0,4 (.88) 20 (.79) 10 (.39) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] GDS030-230BX 6060846A 0,3 (.4) 23 000 8 (.31) 0,4 (.88) 20 (.79) 10 (.39) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] GDS030-230BY 6060845A 0,3 (.4) 23 000 8 (.31) 0,4 (.88) 20 (.79) 10 (.39) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] GDS030-250BXES 6061300B 0,3 (.4) 25 000 8 (.31) 0,6 (1.32) 25 (.98) 12 (.47) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] GDS030-300BX 830495A 0,3 (.4) 30 000 6 (.24) 0,4 (.88) 20 (.79) 6 (.24) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] GDS030-300BY 830495B 0,3 (.4) 30 000 6 (.24) 0,4 (.88) 20 (.79) 6 (.24) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] GDS030-450BX 830496A 0,3 (.4) 45 000 6 (.24) 0,4 (.88) 20 (.79) 6 (.24) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] GDS030-450BY 830496B 0,3 (.4) 45 000 6 (.24) 0,4 (.88) 20 (.79) 6 (.24) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] GDS030-300SX 6060516A 0,3 (.4) 30 000 6 (.24) 0,3 (.66) 20 (.79) 6 (.24) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] GDS030-300SY 830495D 0,3 (.4) 30 000 6 (.24) 0,3 (.66) 20 (.79) 6 (.24) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] GDS030-450SX 830496C 0,3 (.4) 45 000 6 (.24) 0,3 (.66) 20 (.79) 6 (.24) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] GDS030-450SY 830496D 0,3 (.4) 45 000 6 (.24) 0,3 (.66) 20 (.79) 6 (.24) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] GDS030-120VX 6060856A 0,3 (.4) 12 000 8 (.31) 0,3 (.66) 20 (.79) 10 (.39) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] GDS030-120VY 6060855A 0,3 (.4) 12 000 8 (.31) 0,3 (.66) 20 (.79) 10 (.39) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] GDS030-150VX 6060852A 0,3 (.4) 15 000 8 (.31) 0,3 (.66) 20 (.79) 10 (.39) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] GDS030-150VY 6060851A 0,3 (.4) 15 000 8 (.31) 0,3 (.66) 20 (.79) 10 (.39) 6 [3; 4; 5; 1/8“; 3/16“, 1/4"]

DIE GRINDERS - Inline Design, Power Output 300 - 500 W (.4 - .67 HP) Die grinders - inline design - for the grinding with grinding tips

- for the milling with grinding inserts (carbide cutters) Model

Part No.

Power output

Speed (no load)

I.D. of air inlet hose

kW (hp) min-1 (rpm) mm (in)

Weight Max. Ø Max. Ø Collet - clamping range without air of grinding of grinding Collet - standard equipment connection tip insert [optional accessories*] kg (lbs)

mm (in)

mm (in)

GDS030-200VX

6060562A

0,3 (.4)

20 000

8 (.31)

0,6 (1.32)

20 (.79)

10 (.39)

6 [3; 4; 5; 1/8“; 3/16“, 1/4"]

mm

GDS030-200VY

6060561A

0,3 (.4)

20 000

8 (.31)

0,6 (1.32)

20 (.79)

10 (.39)

6 [3; 4; 5; 1/8“; 3/16“, 1/4"]

GDS030-230VX

6060848A

0,3 (.4)

23 000

8 (.31)

0,6 (1.32)

20 (.79)

10 (.39)

6 [3; 4; 5; 1/8“; 3/16“, 1/4"]

GDS030-230VY

6060847A

0,3 (.4)

23 000

8 (.31)

0,6 (1.32)

20 (.79)

10 (.39)

6 [3; 4; 5; 1/8“; 3/16“, 1/4"]

GDS030-300VX

830495C

0,3 (.4)

30 000

6 (.24)

0,4 (.88)

20 (.79)

6 (.24)

6 [3; 4; 5; 1/8“; 3/16“, 1/4"]

GDS030-300VY

828928E

0,3 (.4)

30 000

6 (.24)

0,4 (.88)

20 (.79)

6 (.24)

6 [3; 4; 5; 1/8“; 3/16“, 1/4"]

GDS030-450VX

6060518A

0,3 (.4)

45 000

6 (.24)

0,4 (.88)

20 (.79)

6 (.24)

6 [3; 4; 5; 1/8“; 3/16“, 1/4"]

GDS030-450VY

6060517A

0,3 (.4)

45 000

6 (.24)

0,4 (.88)

20 (.79)

6 (.24)

6 [3; 4; 5; 1/8“; 3/16“, 1/4"]

GDS030-450VX

These grinders are best used in hard to access areas, such as the automotive industry. Vane motor.

GDS030-300QX

6060906A

0,3 (.4)

30 000

6 (.24)

0,4 (.88)

10 (.39)

6 (.24)

3

GDS030-300QY

6060904A

0,3 (.4)

30 000

6 (.24)

0,4 (.88)

10 (.39)

6 (.24)

3

GDS030-300QY

350 W (.47 hp) The ergonomic design of our powerful grinder allows the low-fatique operation in industrial areas. These tools are equipped with gears that allow the perfect operating speed for excellent grinding results. Especially when used with carbide cutters or with wire brushes, this tool performs exceptionally well. Vane motor.

GDS035-023BX

3150571B 0,35 (.47)

2 300

10 (.39)

1,0 (2.2)

20 (.79)

10 (.39)

6 [8; 9; 1/4"; 3/16", 5/16"]

GDS035-045BX

3150571A 0,35 (.47)

4 500

10 (.39)

1,0 (2.2)

20 (.79)

10 (.39)

6 [8; 9; 1/4"; 3/16", 5/16"]

GDS035-045BX

500 W (.67 hp) For the optimum grinding with grinding tips or for the fabricating with carbide cutters. This tool series features a small grip-diameter, a collet with connector nut for an improved clamping force. Our grinders are equipped with an integrated speed-regulator, that holds the speed of the tool constant, even when tool is operated at full load. Cold-isolated housing. Vane motor.

GDS050-120BXI

6061007A

0,5 (.67)

12 000

10 (.39)

0,9 (1.98)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-120BYI

6061015A

0,5 (.67)

12 000

10 (.39)

0,9 (1.98)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-200BXI

6060991A

0,5 (.67)

20 000

10 (.39)

0,9 (1.98)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-200BYI

6061014A

0,5 (.67)

20 000

10 (.39)

0,9 (1.98)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-250BXI

6060990A

0,5 (.67)

25 000

10 (.39)

0,9 (1.98)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-250BYI

6061013A

0,5 (.67)

25 000

10 (.39)

0,9 (1.98)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-300BXI

6060948A

0,5 (.67)

30 000

10 (.39)

0,9 (1.98)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-300BYI

6061012A

0,5 (.67)

30 000

10 (.39)

0,9 (1.98)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-120SXI

6061010A

0,5 (.67)

12 000

10 (.39)

0,7 (1.54)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-120SYI

6061027A

0,5 (.67)

12 000

10 (.39)

0,7 (1.54)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-200SXI

6061006A

0,5 (.67)

20 000

10 (.39)

0,7 (1.54)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-200SYI

6061026A

0,5 (.67)

20 000

10 (.39)

0,7 (1.54)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-250SXI

6061005A

0,5 (.67)

25 000

10 (.39)

0,7 (1.54)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-250SYI

6061025A

0,5 (.67)

25 000

10 (.39)

0,7 (1.54)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-300SXI

6060996A

0,5 (.67)

30 000

10 (.39)

0,7 (1.54)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-300SYI

6061024A

0,5 (.67)

30 000

10 (.39)

0,7 (1.54)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-200VXI

6061002A

0,5 (.67)

20 000

10 (.39)

0,8 (1.76)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-200VYI

6061018A

0,5 (.67)

20 000

10 (.39)

0,8 (1.76)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-250VXI

6061001A

0,5 (.67)

25 000

10 (.39)

0,8 (1.76)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-250VYI

6061017A

0,5 (.67)

25 000

10 (.39)

0,8 (1.76)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-300VXI

6060997A

0,5 (.67)

30 000

10 (.39)

0,8 (1.76)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-300VYI

6061016A

0,5 (.67)

30 000

10 (.39)

0,8 (1.76)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-120WXI

6061009A

0,5 (.67)

12 000

10 (.39)

1,0 (2.2)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-120WYI

6061023A

0,5 (.67)

12 000

10 (.39)

1,0 (2.2)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-200WXI

6061004A

0,5 (.67)

20 000

10 (.39)

1,0 (2.2)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-200WYI

6061022A

0,5 (.67)

20 000

10 (.39)

1,0 (2.2)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-300WXI

6060998A

0,5 (.67)

30 000

10 (.39)

1,0 (2.2)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-300WYI

6061020A

0,5 (.67)

30 000

10 (.39)

1,0 (2.2)

32 (1.26)

16 (.63)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDS050-300BYI

GDS050-200SXI

GDS050-300VXI

GDS050-200WYI

Our turbine grinders operate oilfree and are therefore practically maintenance free. Optimum fabrication results. Due to the high speed, these tools are especially well-suited to the use with carbide cutters in foundries, in the entire mechanical engineering industry, the tool- and die industry. The low weight assures a fatique-free effort. Includes a speed regulator. Lower levels of vibration- and noise emissions compared to standard air-grinders. Your advantage: Extreme low air consumption.

GDST050-550BXO 6061040A

0,5 (.67)

55 000

10 (.39)

0,8 (1.77)

16 (.63)

12 (.47)

6 [3; 4; 5; 1/8“; 3/16“; 1/4“]

GDST050-550BXO

7

DIE GRINDERS - Inline Design, Power Output 500 - 700 W (.67 - .94 HP) Die grinders - inline design - for the grinding with grinding tips

- for the milling with grinding inserts (carbide cutters) Model

Part No.

Power output

Speed (no load)

I.D. of air inlet hose

kW (hp) min-1 (rpm) mm (in)

Weight Max. Ø Max. Ø Collet - clamping range without air of grinding of grinding Collet - standard equipment connection tip insert [optional accessories*] kg (lbs)

mm (in)

mm (in)

mm

700 W (.94 hp) Our grinders fulfill all requirements for an optimum fabrication. Our product line includes grinders that are especially designed for heavy-dutyoperations or with reduced speed. Our grinders are equipped with a integrated speed regulator, that holds the speed of the tool constant, even when tool is operated at full load. Extensive varieties that are suitable for all industrial areas (foundries, automotive industry,etc.). The grinders that feature an extended spindle, are ideal for the cleaning of pipes and the grinding in hard-to reach areas. Cold-insolated housing.Vane motor.

GDST050-550BXFO

GDST050-550SYO

GDST050-550VXO

GDS070-153BYI

GDS070-190SXI

GDS070-190VXI

GDS070-153W2XI

GDS070-120BXI

6060606A 0,7 (.94)

12 000

12 (.47)

1,5 (3.31)

50 (1.97)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-120BYI

6060905A 0,7 (.94)

12 000

12 (.47)

1,7 (3.75)

50 (1.97)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-153BXI

6060573A 0,7 (.94)

15 300

10 (.39)

1,5 (3.31)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-153BYI

6060888A 0,7 (.94)

15 300

10 (.39)

1,7 (3.75)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-153BXFI

6060588A 0,7 (.94)

15 300

10 (.39)

1,6 (3.53)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-153BYFI

6060887A 0,7 (.94)

15 300

10 (.39)

1,4 (3.09)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-190BXI

6060587A 0,7 (.94)

19 000

10 (.39)

1,5 (3.31)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-190BYI

6060885A 0,7 (.94)

19 000

10 (.39)

1,7 (3.75)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-190BXFI

6060589A 0,7 (.94)

19 000

10 (.39)

1,6 (3.53)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-190BYFI

6060889A 0,7 (.94)

19 000

10 (.39)

1,4 (3.09)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-190BXIH

6060989A 0,7 (.94)

19 000

10 (.39)

1,2 (2.65)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-230BXI

6060566A 0,7 (.94)

23 000

10 (.39)

1,7 (3.75)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-230BYI

6060886A 0,7 (.94)

23 000

10 (.39)

1,7 (3.75)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-230BXFI

6060590A 0,7 (.94)

23 000

10 (.39)

1,6 (3.53)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-230BYFI

6060890A 0,7 (.94)

23 000

10 (.39)

1,4 (3.09)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-070SXI

6060608A 0,7 (.94)

7 000

10 (.39)

1,2 (2.65)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-153SXI

6060574A 0,7 (.94)

15 300

10 (.39)

1,2 (2.65)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-153SYI

6060881A 0,7 (.94)

15 300

10 (.39)

1,4 (3.09)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-190SXI

6060599A 0,7 (.94)

19 000

10 (.39)

1,2 (2.65)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-190SYI

6060882A 0,7 (.94)

19 000

10 (.39)

1,4 (3.09)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-190SXIH

6060983A 0,7 (.94)

19 000

10 (.39)

0,9 (1.98)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-230SXI

6060569A 0,7 (.94)

23 000

10 (.39)

1,2 (2.65)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-230SYI

6060883A 0,7 (.94)

23 000

10 (.39)

1,4 (3.09)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-153VXI

6060595A 0,7 (.94)

15 300

10 (.39)

1,5 (3.31)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-153VYI

6060884A 0,7 (.94)

15 300

10 (.39)

1,7 (3.75)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-190VXI

6060596A 0,7 (.94)

19 000

10 (.39)

1,5 (3.31)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-190VYI

6060879A 0,7 (.94)

19 000

10 (.39)

1,7 (3.75)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-190VXIH

6060984A 0,7 (.94)

19 000

10 (.39)

1,2 (2.65)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-230VXI

6060597A 0,7 (.94)

23 000

10 (.39)

1,5 (3.31)

35 (1.38)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS070-230VYI

6060880A 0,7 (.94)

23 000

10 (.39)

1,7 (3.75)

35 (1.38)

16 (.63)

GDS070-153WXI

6060581A 0,7 (.94)

15 300

10 (.39)

2,1 (4.63)

GDS070-153WYI

6060891A 0,7 (.94)

15 300

10 (.39)

2,3 (5.07)

GDS070-153W1XI

6060582A 0,7 (.94)

15 300

10 (.39)

2,6 (5.73)

GDS070-153W2XI

6060583A 0,7 (.94)

15 300

10 (.39)

3,1 (6.83)

GDS070-153W3XI

6060584A 0,7 (.94)

15 300

10 (.39)

3,6 (7.94)

GDS070-153W4XI

6060585A 0,7 (.94)

15 300

10 (.39)

4,1 (9.04)

Brushers or flap wheels of maximal diameter 50 mm (1.97 in) can be used with these grinders only.

6 [8; 9; 3/16“; 5/16“; 1/4“] 6 [8; 9; 3/16“; 5/16“; 1/4“] 6 [8; 9; 3/16“; 5/16“; 1/4“] 6 [8; 9; 3/16“; 5/16“; 1/4“] 6 [8; 9; 3/16“; 5/16“; 1/4“] 6 [8; 9; 3/16“; 5/16“; 1/4“] 6 [8; 9; 3/16“; 5/16“; 1/4“]

1 000 W (1.34 hp)

GDST100-280BX

8

Our turbine grinders operate oilfree and are therefore practically maintenance free. Grinding and milling in almost every industrial area.

The low weight assures a fatique-free effort. An integrated, automatic brake eliminates any trailing of the grinding spindle. Integrated speed regulator. Lower levels of vibration- and noise emissions compared to standard air-grinders. Especially well suited for the use with steel-disks. Your advantage: Extreme low air consumption.

GDST100-280BX

6061137A

1 (1.34)

28 000

13 (.51)

1,9 (4.19)

32 (1.26)

16 (.63)

6 [3;4;5;8;9;3/16";5/16";1/4"]

DIE GRINDERS - Inline Design, Power Output 1 - 1,2 kW (1.34 -1.61 HP) Die grinders - inline design - for the grinding with grinding tips

- for the milling with grinding inserts (carbide cutters) Model

Part No.

Power output

Speed (no load)

I.D. of air inlet hose

Weight Max. Ø Max. Ø Collet - clamping range without air of grinding of grinding Collet - standard equipment connection tip insert [optional accessories*]

kW (hp) min-1 (rpm) mm (in) kg (lbs) mm (in) mm (in) mm Our powerful die-grinders are designed to fulfill the highest quality demands when they are used on industrial applications - in foundries, in the tool- and die making industry or in the precision fabrication industry. These grinders are well-suited for the deburring/polishing of welding seems and for the processing of casted parts. The grinders that feature an extended spindle, are ideal for the cleaning of pipes and for the grinding in hard-to-reach areas. Please Note: When using these grinders for pipe-cleaning, attach lamellar sanding discs or wire brushes only! With an integrated speed regulator, that holds the speed of the tool constant, even when tool is operated at full load. Cold-insolated housing. Vane motor.

GDS100-153BXI

6060586A

1 (1.34)

15 300

12 (.47)

1,7 (3.75)

50 (1.97)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS100-153BYI

6060896A

1 (1.34)

15 300

12 (.47)

1,9 (4.19)

50 (1.97)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS100-190BXI

6060570A

1 (1.34)

19 000

12 (.47)

1,7 (3.75)

50 (1.97)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS100-190BYI

6060897A

1 (1.34)

19 000

12 (.47)

1,9 (4.19)

50 (1.97)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS100-153SXI

6060575A

1 (1.34)

15 300

12 (.47)

1,3 (2.87)

50 (1.97)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS100-153SYI

6060898A

1 (1.34)

15 300

12 (.47)

1,5 (3.31)

50 (1.97)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS100-190SXI

6060571A

1 (1.34)

19 000

12 (.47)

1,3 (2.87)

50 (1.97)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS100-190SYI

6060899A

1 (1.34)

19 000

12 (.47)

1,5 (3.31)

50 (1.97)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS100-153VXI

6060594A

1 (1.34)

15 300

12 (.47)

1,6 (3.53)

50 (1.97)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS100-153VYI

6060900A

1 (1.34)

15 300

12 (.47)

1,8 (3.97)

50 (1.97)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS100-190VXI

6060591A

1 (1.34)

19 000

12 (.47)

1,6 (3.53)

50 (1.97)

16 (.63)

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS100-153WXI

830516A

1 (1.34)

15 300

12 (.47)

2,5 (5.51)

GDS100-153WYI

6060840A

1 (1.34)

15 300

12 (.47)

2,7 (5.95)

GDS100-153W1XI 830516B

1 (1.34)

15 300

12 (.47)

3,0 (6.61)

GDS100-153W2XI 830516C

1 (1.34)

15 300

12 (.47)

3,5 (7.72)

GDS100-153W3XI 6060579A

1 (1.34)

15 300

12 (.47)

4,0 (8.82)

GDS100-153W4XI 6060580A

1 (1.34)

15 300

12 (.47)

4,5 (9.92)

6 [8; 9; 3/16“; 5/16“; 1/4“] Brushers or flap wheels of maximal diameter 50 mm (1.97 in) can be used with these grinders only.

6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS100-190BYI

GDS100-153SXI

GDS100-153VXI

6 [8; 9; 3/16“; 5/16“; 1/4“] 6 [8; 9; 3/16“; 5/16“; 1/4“] 6 [8; 9; 3/16“; 5/16“; 1/4“] 6 [8; 9; 3/16“; 5/16“; 1/4“]

GDS100-153W2YI

1 200 W (1.61 hp) The robust construction of this grinder assures a high lifespan even when used in a 24/7 operation. An operator is able to work fatigue-free with this powerful air tool. The grinder is preferably used with grinding tips or carbide cutters for the treatment of plastics and metals in foundries, in the mold-making- and fixture-building industries and wherever precision fabrication is needed for de-burring, for the polishing of welding seems and for the processing of casted parts. The grinder incorporates a fast-acting speed regulator, which keeps the tools' speed constant even when operated at full load. The speed-regulator allows the adjustment of the peripheral speed; this allows the maximum speed potential to be used for any given application. This grinder operates at an extreme low noise level and keeps its operating vibration to a minimum. The previous, overhauled model no. PBK 75X was renamed the GDS 120 and is one of the best-selling DEPRAG INDUSTRIAL grinders. Vane motor.

GDS120-120BX

6061163A

1,2 (1.61)

12 000

13 (.51)

2,3 (5.07)

50 (1.97)

20 (.79)

6[3;4;5;8;9;3/16";5/16";1/4"] Specifications at 90 psi (6,3 bar) * We offer also other collet sizes.

GDS120-120BX

GDST025-700BY

GDS120-120BX

Advantages:  for industrial applications  high power-output at a low weight  highly durable  efficient  ergonomic  simple operation 9

DIE GRINDERS - Angle-head Design, Power Output 130 - 700 W (.17 - .94 HP) Die grinders - angle-head design - for the grinding with grinding tips (for the grinding/sharpening of drill-crowns with diamond grinding-tips - Model GDA 060-200BX) - for the milling with grinding inserts (carbide cutters) Model

Part No.

Power output

Speed (no load)

I.D. of air inlet hose

Weight Max. Ø Max. Ø Collet - clamping range without air of grinding of grinding Collet - standard equipment connection tip insert [optional accessories*]

W (hp)

GDA030-300BY

GDA030-120SX

GDB030-450SX

GDA060-200BX

min-1 (rpm) mm (in) kg (lbs) mm (in) mm (in) mm 130 W (.17 hp) Small, light weight and ergonomic grinders in angle-head design are especially well suited for the grinding and milling in hard-to-reach areas.There are many applications areas, such as the tool-, die- and mold industry or when precision fabricating is necessary. Vane motor.

Angle-Head in 90° GDA013-550BX 830494A 0,13 (.17) 55 000 5 (.20) 0,2 (.44) 10 (.39) 3 (.12) 3 [2; 3,25; 3/32“, 1/8“] GDA013-550BY 830494B 0,13 (.17) 55 000 5 (.20) 0,2 (.44) 10 (.39) 3 (.12) 3 [2; 3,25; 3/32“, 1/8“] 300 W (.40 hp) Fabricating of plastics or metal. Because of the angle-head, this tool series is best used for hard-to-reach areas in foundries, tool-, die- and mold making industries or where precision fabricating is required. Vane motor.

Angle-Head in 90° GDA030-300BX 6060950A 0,3 (.40) 30 000 8 (.31) 0,5 (1.10) 20 (.79) 6 (.24) 6 [3; 4; 5; 1/8"; 3/16"; 1/4"] GDA030-300BY 6060949A 0,3 (.40) 30 000 8 (.31) 0,5 (1.10) 20 (.79) 6 (.24) 6 [3; 4; 5; 1/8"; 3/16"; 1/4"] GDA030-450BX 6060955A 0,3 (.40) 45 000 8 (.31) 0,5 (1.10) 16 (.63) 6 (.24) 6 [3; 4; 5; 1/8"; 3/16"; 1/4"] GDA030-450BY 6060954A 0,3 (.40) 45 000 8 (.31) 0,5 (1.10) 16 (.63) 6 (.24) 6 [3; 4; 5; 1/8"; 3/16"; 1/4"] GDA030-120SX 6061260A 0,3 (.40) 12 000 8 (.31) 0,7 (1.54) 16 (.63) 6 (.24) 6 [3;3,1;4;4,1;4,76;5;6,35] GDA030-180SX 6061260B 0,3 (.40) 18 000 8 (.31) 0,7 (1.54) 16 (.63) 6 (.24) 6 [3;3,1;4;4,1;4,76;5;6,35] GDA030-300SX 6060953A 0,3 (.40) 30 000 8 (.31) 0,5 (1.10) 20 (.79) 6 (.24) 6 [3; 4; 5; 1/8"; 3/16"; 1/4"] GDA030-450SX 6060958A 0,3 (.40) 45 000 8 (.31) 0,5 (1.10) 16 (.63) 6 (.24) 6 [3; 4; 5; 1/8"; 3/16"; 1/4"] Angle-Head in 120° GDB030-300BX 6060960A 0,3 (.40) 30 000 8 (.31) 0,5 (1.10) 20 (.79) 6 (.24) 6 [3; 4; 5; 1/8"; 3/16"; 1/4"] GDB030-300BY 6060959A 0,3 (.40) 30 000 8 (.31) 0,5 (1.10) 20 (.79) 6 (.24) 6 [3; 4; 5; 1/8"; 3/16"; 1/4"] GDB030-450BX 6060965A 0,3 (.40) 45 000 8 (.31) 0,5 (1.10) 16 (.63) 6 (.24) 6 [3; 4; 5; 1/8"; 3/16"; 1/4"] GDB030-450BY 6060964A 0,3 (.40) 45 000 8 (.31) 0,5 (1.10) 16 (.63) 6 (.24) 6 [3; 4; 5; 1/8"; 3/16"; 1/4"] GDB030-300SX 6060963A 0,3 (.40) 30 000 8 (.31) 0,5 (1.10) 20 (.79) 6 (.24) 6 [3; 4; 5; 1/8"; 3/16"; 1/4"] GDB030-450SX 6060968A 0,3 (.40) 45 000 8 (.31) 0,5 (1.10) 16 (.63) 6 (.24) 6 [3; 4; 5; 1/8"; 3/16"; 1/4"] 600 W (.80 hp) This grinder has been especially designed for the grinding (or sharpening) of drill-crowns. For the carbide sharpening of the drill-crowns, we recommend the use of a round, diamond grinding-tip with a max. OD of 20 mm (.79 in) and a shaft-diameter of 8 mm (.31 in). An air- and water cooling system (optional accessories) reduces the wear and tear of the drill-crowns. Vane motor.

GDA060-200BX 6060925A 0,6 (.80) 20 000 10 (.39) 1,4 (3.09) 8 [5/16", 9"] 700 W (.94 hp) Optimum fabrication results in all industrial areas. Ideal because of the angle-head, this tool accesses hard-to-reach areas, such as when processing molds and for the cutting of castings or fixtures. This tool is suitable for the fabricating of both metals and plastics. Our grinders are equipped with a speed-regulator, that holds the speed of the tool constant, even when tool is operated at full load. Vane motor.

Angle-Head in 90° GDA070-153BX 830497A 0,7 (.94) 15 300 10 (.39) 1,0 (2.20) 50 (1.97) 16 (.63) 6 [8; 9; 3/16"; 5/16", 1/4"] GDA070-190BX 830497C 0,7 (.94) 19 000 10 (.39) 1,0 (2.20) 50 (1.97) 16 (.63) 6 [8; 9; 3/16"; 5/16", 1/4"] GDA070-230BX 830497E 0,7 (.94) 23 000 10 (.39) 1,0 (2.20) 40 (1.58) 16 (.63) 6 [8; 9; 3/16"; 5/16", 1/4"] * We offer also other collet sizes.

Advantages:  for industrial applications  high power-output at a low weight  highly durable  efficient  ergonomic  simple operation 10

Specifications at 90 psi (6,3 bar).

Angle-Head 90°

Angle-Head 120°

GDB 030-450BY GDB 030-300BX

STRAIGHT GRINDERS - Power Output 1,1 - 2,8 kW (1.48 - 3.75 HP) Straight grinders - for the fabrications on steel, for the deburring of welding-, casting-, and ridge-seams (with grinding disks) - for the removal of rust, the descaling of rolled steel and forgings (with steel brushes) Model

Part No.

Power output kW (hp)

Speed (no load)

I.D. of Weight air inlet without air hose connection

min-1 (rpm) mm (in)

kg (lbs)

Max. radial speed

External/internal diameter

For grinding disk Width

m/s (ft/s)

mm (in)

mm (in)

Type

Our straight grinders are designed for the use with grinding disks when heavy-duty fabrication is required on steel and castings and for the deburring of welding-, casting-, and ridge-seams. They can also be used with steel brushes for the removal of rust, the de-scaling of rolled steel and forgings. The integrated speed regulator keeps the speed nearly constant and also reduces the air consumption. Vane motor.

GS315-240BX

6061141A

2,4 (3.22)

4 000

16 (.63) 6,5 (14.3)

32 (105)

150/20 (6"/.79)

20÷25 (.79÷.98)

flat

GS508-120BX

6061228A

1,2 (1.61)

12 000

13 (.51)

50 (164)

80/20 (3"/.79)

20÷25 (.79÷.98)

flat

2,2 (4.9)

GS508-120BXA

6061228B

1,2 (1.61)

12 000

13 (.51)

2,2 (4.9)

50 (164)

80/20 (3"/.79)

20÷25 (.79÷.98) tapered

GS510-230BX

6061289A

2,3 (3.08)

9 500

16 (.63)

4,0 (8.8)

50 (164)

100/20 (4"/.79)

20÷25 (.79÷.98)

150/20 (6"/.79)

GS818-210BX

flat

GS515-280BX

6061301A

2,8 (3.75)

6 400

16 (.63) 5,4 (11.9)

50 (164)

20÷25 (.79÷.98)

flat

GS818-210BX

6061296A

2,1 (2.8)

8 500

16 (.63)

80 (262) 180/22,23 (7"/.88) 8÷10 (.31÷.39)

flex

GS818-210BXE

6061296B

2,1 (2.8)

8 500

16 (.63) 4,25 (9.4)

80 (262) 180/22,23 (7"/.88) 2,5÷10 (.09÷.39)

flex

GS823-280BXE

6061307B

2,8 (3.8)

6 600

16 (.63) 5,5 (12.1)

80 (262) 230/22,23 (9"/.88) 2,5÷10 (.09÷.39)

flex

4,0 (8.8)

GS508-120BX

Specifications at 90 psi (6,3 bar).

GS823-280BXE GST508-120BX

Advantages  for industrial applications  optimum power-to-weight ratio  highly durable  robust  efficient  simple operation 11

ANGLE GRINDERS - Without Gearing, for Grinding Disks with a Diameter of 115 - 230 mm Angle grinders with direct drive - for the scrubbing and leveling of cast-iron parts, steel parts, welding seams, non-ferrous metals of all types and rock, as well as for any other fabrication areas, such as the steel- and container construction, for machine building, in foundries and concrete construction Model

PBU115C-80Z

PBU180G-80X

PBU230G-80X

Part No.

Power output

Speed (no load)

I.D. of air Weight inlet hose without air connection

Max. Ø of grinding disk O.D. / I.D.

Max. Max. Spindle thickness radial thread of grinding speed disk kW (hp) min-1 (rpm) mm (in) kg (lbs) mm (in) mm (in) m/s • For grinding wheels of type 27, the smallest angle grinder is a one-hand operational tool, which is primary used for light duty jobs; the angle grinder Models PBU are equipped with direct drives, resulting in lower maintenance requirements • Start by button • Integrated ABU (auto-balancing-unit) reduces vibration and allows a fatique-free operation • The integrated speed regulator holds the speed of the tool constant, even when tool is operated at full load. Low air consumption.

• Vane motor PBU115C-80Z 826309A 0,5 (.67) 13 200 10 (.39) 1,9 (4.19) 115/22,23 (4.53/.87) 8 (.31) 80 M14 • For grinding wheels of type 27, ideal tools for grinding in areas not limited by space the angle grinder Models PBU are equipped with direct drives resulting in lower maintenance requirements • Safety lever (lever on handle facing downwards) • Without an ABU (NO auto-balancing-unit) • The integrated speed regulator holds the speed of the tool constant, even when tool is operated at full load. Low air consumption.

• Vane motor PBU150G-80X 6060457A 1,9 (1.48) 10 200 16 (.63) 4,1 (9.04) 150/22,23 (5.91/.87) 10 (.39) 80 M14 PBU180G-80X 830426A 1,9 (1.48) 8 500 16 (.63) 4,3 (9.47) 180/22,23 (7.09/.87) 10 (.39) 80 M14 PBU230G-80X 6060455A 1,9 (1.48) 6 600 16 (.63) 4,4 (9.70) 230/22,23 (9.06/.87) 10 (.39) 80 M14 • For grinding wheels of type 27, ideal tool for grinding in areas not limited by space and for heavy duty operations the angle grinders Models PBU are equipped with direct drives resulting in lower maintenance requirements • Safety lever (lever on handle facing upwards) • Integrated ABU (auto-balancing-unit) reduces vibration and allows a fatique-free operation • The integrated speed regulator holds the speed of the tool constant, even when tool is operated at full load. Low air consumption.

• Vane motor PBU180E-80X 826310A 2,4 (3.22) 8 500 16 (.63) 5,3 (11.68) 180/22,23 (7.09/.87) 10 (.39) 80 M14 PBU180F-80X 826311A 1,2 (1.61) 8 500 13 (.51) 4,2 (9.26) 180/22,23 (7.09/.87) 10 (.39) 80 M14 PBU230E-80X 826312A 2,35 (3.15) 6 600 16 (.63) 5,5 (12.13) 230/22,23 (9.06/.87) 10 (.39) 80 M14 • For cup-wheels of type 11 or 6. When used in heavy-duty operations, such as ship-building or railway construction, an angle grinder that is capable for mounting a cup-wheel must be used. We especially designed our Model PBU 125C-45X for this purpose.

• Safety lever (lever on handle facing upwards) • Integrated ABU (auto-balancing-unit) reduces vibration and allows a fatique-free operation • The integrated speed regulator holds the speed of the tool constant, even when tool is operated at full load. Low air consumption.

• Vane motor PBU125C-45X 6060487A 2,35 (3.15) 6 600 16 (.63) 5,6 (12.35) 125/22,23 (4.92/.87) 50 (1.97) 45 M14 Specifications at 90 psi (6,3 bar).

PBU230E-80X

Advantages:  for industrial applications  high power-output  efficient  ergonomic  low demands on service  highly durable 12

ANGLE GRINDERS - With Gearing, for Grinding Disks with a Diameter of 100 - 230 mm Angle grinders with angle gear - for the scrubbing and leveling of cast-iron parts, steel parts, welding seams, non-ferrous metals of all types and rock, as well as for any other fabrication areas, such as the steel- and container construction, for machine building, in foundries and concrete construction Model

Part No.

Power output

Speed (no load)

I.D. of Weight air inlet without air hose connection

Max. Ø of grinding disk O.D. / I.D.

Max. thickness of grinding disk

Max. cutting depth

Max. Spindle radial thread speed

kW (hp) min-1 (rpm) mm (in) kg (lbs) mm (in) mm (in) mm (in) m/s For grinding or when used with cut-off wheels of type 27, 41/42, for the best-possible grinding results even on hard-to-reach areas.

Safety lever (lever on handle facing upwards). Integrated ABU (auto-balancing-unit) reduces vibration and allows a fatique-free operation. Integrated speed regulator. Vane motor.

GA810-050BX 6061139A 0,5 (.67) 15 300 10 (.39) 1,3 (2.87) 100/16 (3.94/.63) 6 (.24) 30 (1.18) 80 M14 GA811-100BX 6060546A 1 (1.34) 13 200 13 (.51) 2,4 (5.29) 115/22,23 (4.53/.87) 6 (.24) 29 (1.14) 80 M14 GA812-100BX 6060545A 1 (1.34) 12 200 13 (.51) 2,4 (5.29) 125/22,23 (4.92/.87) 6 (.24) 34 (1.34) 80 M14 For grinding or when used with cut-off wheels of type 27, 41/42, for the best-possible grinding results even on hard-to-reach areas.

Safety lever (lever on handle facing downwards). Integrated ABU (auto-balancing-unit) reduces vibration and allows a fatique-free operation. Integrated speed regulator. Vane motor.

GA812-190BX 6061275A 1,9 (2.55) 11 900 16 (.63) 3 (6.61) 125/22,23 (4.92/.87) 6 (.24) 30,5 (41.0) 80 M14 GA815-190BX 6061275B 1,9 (2.55) 9 850 16 (.63) 3,1 (6.83) 150/22,23 (5.91/.87) 6 (.24) 43 (57.7) 80 M14 GA818-190BX 6061275C 1,9 (2.55) 8 350 16 (.63) 4,4 (9.70) 180/22,23 (7.09/.87) 8 (.32) 58 (2.28) 80 M14 GA823-190BX 6061275D 1,9 (2.55) 6 650 16 (.63) 3,6 (7.93) 230/22,23 (9.06/.87) 8 (.32) 83 (3.27) 80 M14 For grinding or when used with cut-off wheels of type 27, 41/42, for the best-possible grinding results even on hard-to-reach areas.

Lever on handle facing downwards). Integrated ABU (auto-balancing-unit) reduces vibration and allows a fatique-free operation.

Integrated speed regulator. Low air consumption. Vane motor.

GA818-250BX 6060970C 2 500 8 500 16 (.63) 4,4 (9.70) 180/22,23 (7.09/.87) 10 (.39) 54 (2.13) 80 M14 GA823-250BX 6060971C 2 500 6 640 16 (.63) 4,7 (10.36) 230/22,23 (9.06/.87) 8 (.32) 79 (3.11) 80 M14 Air turbine grinders - DOUBLE THE POWER! HALF THE WEIGHT! For grinding or when used with cut-off wheels of type 27, 41/42, for the best-possible grinding results even on hard-to-reach areas.

Safety lever (lever on handle facing downwards). Oilfree and maintenance-free operation, turbine motor does not require airline lubrication. Optimal power to weight ratio, low air consumption, high material removal. Perfect handling due to the vibration-dampening grip. The tool can simply be changed to accommodate a left-handed operator. High operating-safety. The machine automatically shuts-off at overload. The integrated speed regulator holds the speed of the tool constant, even when tool is operated at full load.

GAT812-221BX 310519B 2,2 (2.95) 12 000 13 (.51) 2,2 (2.95) 125/22,23 (4.92/.87) 6 (.24) 38,5 (1.52) 80 M8 GAT812-221BX-M14 310519H 2,2 (2.95) 12 000 13 (.51) 2,3 (5.07) 125/22,23 (4.92/.87) 8 (.31) 38,5 (1.52) 80 M14 GAT812-260BX 310519C 2,6 (3.49) 12 000 13 (.51) 2,2 (2.95) 125/22,23 (4.92/.87) 6 (.24) 38,5 (1.52) 80 M8 GAT812-260BX-M14 310519F 2,6 (3.49) 12 000 13 (.51) 2,3 (5.07) 125/22,23 (4.92/.87) 8 (.31) 38,5 (1.52) 80 M14 GAT815-260BX-M14 310687C 2,6 (3.49) 10 200 13 (.51) 2,8 (6.17) 125/22,23 (4.92/.87) 10 (.39) 44 (1.73) 80 M14 GAT818-260BX 310687A 2,6 (3.49) 8 500 13 (.51) 2,8 (6.17) 180/22,23 (7.09/.87) 13 (.47) 59 (2.32) 80 M8 GAT818-260BX-M14 310687D 2,6 (3.49) 8 500 13 (.51) 3,0 (6.61) 180/22,23 (7.09/.87) 10 (.39) 59 (2.32) 80 M14 GAT818-451BX 418193F 4,5 (6.03) 8 500 19 (.75) 4,0 (8.82) 180/22,23 (7.09/.87) 10 (.39) 59 (2.32) 80 M14 GAT823-451BX 418193G 4,5 (6.03) 6 600 19 (.75) 4,2 (9.26) 230/22,23 (9.06 /.87) 8 (.31) 76 (3.0) 80 M14

GA812-190BX

GAT815-190BX

GA823-190BX

GA823-250BX

GAQ818-250BX

Specifications at 90 psi (6,3 bar).

Angle grinders DEPRAG INDUSTRIAL with dust extraction - efficient extraction at the place where dust is generated The result: a clean working environment and best view of your work piece.

Dust extraction guard for angle grinders

GAT818-190BX

Advantages  for industrial applications  high power  highly durable  efficient  ergonomic  for an oilfree operation, we offer our special line of turbine grinders

13

BELT SANDERS - Power Output 300 W, 500 W (.4, .67 HP) Belt sanders - for the grinding, smoothening and polishing of even and curved surfaces, for the bevelling of edges and the fabricating of steel, stainless-steel, brass, bronze-casting, aluminum parts, etc.

Model

Part No.

Power output

Speed (no load)

I.D. of air inlet hose

Weight without air connection

Radial speed of grinding belt

Dimensions of grinding belt

kW (hp) min-1 (rpm)

GB030-013BX

GB050-025BX

mm (in) kg (lbs) m/s (ft/s) mm (in) 300 W (.4 hp) Our belt-sanders are well suited for the grinding and polishing of even and curved surfaces. Basic design or design with exhaust hose.

Can even be operated as a grinders with collet. Vane motor.

GB030-013BX 830498A 0,3 (.4) 30 000 6 (.24) 0,9 (1.98) 28 (91.84) 13 x 305 (.51 x 12.01) GB030-013CX 830498B 0,3 (.4) 30 000 6 (.24) 1,2 (2.65) 28 (91.84) 13 x 305 (.51 x 12.01) 500 W (.67 HP) Ergonomic belt sander for grinding and polishing of even and curved surfaces - for heavy duty, industrial applications. With integrated speed regulator. Vane motor.

GB050-025BX 6060932A 0,5 (.67) 16 000 10 (.39) 1,4 (3.09) 23 (75.44) 19 x 480 (.75 x 18.90) Specifications at 90 psi (6,3 bar).

Contact Arms for Belt Sanders

DEPRAG CZ a.s. offer contact arms for belt sanders in different designs, shapes, sizes and materials - made for your application.

We produce contact wheels for our belt sanders with different materials - e.g. polyurethan, steel, bronze, brass etc., with different diameter from 8 mm (5/16") to 25 mm (1"), and width from 8 mm (5/16") to 26 mm (1-1/32").

The application range of the belt grinders is almost unlimited, due to many different contact arms that we offer. The grinders can be used for standard vertical or horizontal grinding of edges and pipes. Different size of contact wheels and thin arms allow grinding of places with limited access or inside holes. Contact arms with belt support are used on flat surfaces and arms without support are more suitable for finishing of round surfaces.

According to the requirement, we offer belts with different width from 3,5 mm (9/64") to 25 mm (1") and lengths from 305 mm (12") to 510 mm (20").

The specialized construction of the contact-arms allows the efficient grinding, even in tight quarters. The contact-arms are efficiently connected to the motor of the belt-sander by a contact-wheel.

Advantages:  for industrial applications  high power-output  highly durable  operates in hard-to reach areas  grinding of plain or curved surfaces

14

GB030-013CX

GB050-025BX

AIR VANE MOTORS FOR SPECIAL APPLICATIONS - ready for integration into your machine DEPRAG has a wide range of air vane motors designed for special applications and available for grinding, milling and drilling.

Grinding motors The DEPRAG grinding motor program benefits from decades of experience with the tried and tested DEPRAG handheld pneumatic grinders.

The robust steel housing guarantees high accuracy and operational reliability. Furthermore, the grinding spindle features extreme precise collets for various shaft dia- meters and assure a high run-out accuracy.

Available power ranges: 150 W - 1.000 W (.2 -1.34 HP) Speed (no load): 15.300 - 47.000 rpm (made to suit your individual application) Actual and detailed information, showing the complete product line of DEPRAG air vane motors for grinding, may be found on our web side www.deprag.com or in our catalog D 6800. Please contact our product specialist if you cannot find a suitable tool.

Stationary grinders DEPRAG INDUSTRIAL Model

GDS030-300BSV GDS030-450BSV GDS050-200BSV GDS070-190BSV GDS100-153BSV

Part No.

6061173A 6061174A 6061168A 6061169A 6061172A

Power output

Speed (no load)

kW (hp) min-1 (rpm) 0,3 (.4) 30 000 0,3 (.4) 45 000 0,5 (.67) 20 000 0,7 (.94) 19 000 1 (1.34) 15 300

I.D. of air inlet hose

Weight Max. Ø Max. Ø without air of grinding of grinding connection tip insert

mm (in) 6 (.24) 6 (.24) 10 (.39) 10 (.39) 12 (.47)

kg (lbs) 0,7 (1.54) 0,7 (1.54) 1,2 (2.65) 1,7 (3.75) 1,7 (3.75)

mm (in) 20 (.79) 20 (.79) 32 (1.26) 40 (1.57) 50 (1.97)

mm (in) 6 (.24) 6 (.24) 16 (.63) 16 (.63) 16 (.63)

Max. Ø of flap wheel mm 25 (.98) 15 (.59) 40 (1.57) 40 (1.57) 50 (1.97)

Collet - clamping range Collet - standard equipment [optional accessories*] mm 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] 6 [3; 4; 5; 1/8“; 3/16“, 1/4"] 6 [3; 4; 1/8“; 3/16“, 1/4"] 6 [3; 4; 5; 8; 9; 5/16“; 3/16“, 1/4"] 6 [3; 4; 5; 8; 9; 5/16“; 3/16“, 1/4"] Specifications at 90 psi (6,3 bar). * We offer also other collet sizes.

Milling motors The durable milling motors with a superior run-out precision, are the first choice for robotic applications since they are small in size but powerful and offer a vast speed range.

Available power classes: 400 W (.5 HP) Speed (no load): max. 20.000 rpm (according to your individual application) Actual and detailed information, showing the complete product line of DEPRAG air vane motors for milling, may be found on our web side www.deprag.com or in our catalog D 6800. Please contact our product specialist if you cannot find a suitable tool.

Drilling motors Drill motors in slim design allow narrow hole spacing for multiple spindle-units as required for window manufacturing.

Available power classes: 80 W - 600 W (.1 - .8 HP) Speed (no load): 150 - 24.000 rpm Actual and detailed information, showing the complete product line of DEPRAG air vane motors for drilling, may be found on our web side www.deprag.com or in our catalog D6800.

Please contact our product specialist if you cannot find a suitable tool.

Advantages  A wide range of our air vane motors

GDS030-300 BY

for grinding, milling and drilling in a standard assortment.  robust  highly durable  high power output

15

POLISHERS - Pistol-Grip / Angle-head Design Polishers - pistolgrip - for a fine-precision polishing or for the heavy-duty de-rusting of metal, for the removal of paint layers, or even the coarse grinding of cast-iron or wood by using fiber disks Model

PLU50A-55ZK

Part No.

Power output

Speed (no load)

Max. Ø of support disk mm (in)

Max. Ø of grinding tip

Max. Ø of grinding insert

I.D. of air inlet hose

Weight without air connection

Collet clamping range

kW (hp) min-1 (rpm) mm (in) mm (in) mm (in) kg (lbs) mm (in) Polishers with pistol-grip • Grinding and polishing - non-stop operation even when used in 24/7 operations • The polisher PLU 50B is equipped with an extended spindle W 1/4" for hard-to-reach areas, and for difficult applications such as the automotive construction.

• Push button • With integrated speed regulator • Vane motor PLU50A-55ZK 6060670A 0,45 (.60) 21 000 50 (1.97) 35 (1.38) 9,5 (.37) 10 (.39) 0,8 (1.76) 6 (.24) PLU50B-45ZK 6060671A 0,45 (.60) 17 800 50 (1.97) 35 (1.38) 10 (.39) 0,8 (1.76) 8 (.31) PLU50C-40ZK 830499A 0,45 (.60) 15 000 50 (1.97) 35 (1.38) 10 (.39) 0,8 (1.76) 6,35 (.25) PLU75A-70ZK 830499B 0,45 (.60) 17 800 75 (2.95) 10 (.39) 0,8 (1.76) 6 (.24) Specifications at 90 psi (6,3 bar).

Model

PA025-011SX

PA030-032BX

PLU180D-80X

PLP180A-40X

Part No.

Power output

Speed (no load)

Rubber support disk-Ø

I.D. of air inlet hose

Weight without air connection

Spindle thread

mm mm (in) kg (lbs) kW (hp) min-1 (rpm) Polishers - with angle head 90° • For the polishing of casted parts, welding seams and other materials using vulcan fiber disks • Safety lever • With gear for optimal working-speeds and the best polishing operations • Vane motor PA025-036SX 3149172B 0,25 (.34) 3 600 120 (4.72) 6 (.24) 0,9 (1.98) M14 PA025-021SX 3149172C 0,25 (.34) 2 100 120 (4.72) 6 (.24) 0,9 (1.98) M14 PA025-011SX 3149172D 0,25 (.34) 1 100 120 (4.72) 6 (.24) 0,9 (1.98) M14 PA030-032BX 300146A 0,30 (.40) 3 200 120 (4.72) 6 (.24) 0,8 (1.76) M14 Angle polishers, with direct drive • For the polishing of casted parts, welding seams and other materials using vulcan fiber disks • Push button (Model PLU 115A-80Z); safety lever (Model PLU 180D-80X - lever on handle facing upwards; Model PLU 180E-80X - lever on handle facing downwards).

• With integrated speed regulator • Vane motor PLU115A-80Z 826313A 0,46 (.62) 13 200 115 (4.53) 10 (.39) 1,4 (3.09) M14 PLU180D-80X 826314A 1,2 (1.61) 8 500 180 (7.09) 13 (.51) 3,1 (6.83) M14 PLU180E-80X 830499C 1,2 (1.61) 8 500 180 (7.09) 13 (.51) 2,7 (5.95) M14 Angle polishers, with gear • For the polishing of casted parts, welding seams and other materials using vulcan fiber disks, or for the polishing of car bodies after welding in the automotive industry, for the best-possible polishing results even on hard-to-reach areas • Model PLP - safety lever, with extended spindle (design A) or without extended spindle (design B) • Model PA 070 - twist valve, double insulated housing for noise reduction and low vibration • With integrated speed regulator • Vane motor PLP180A-40X 6060663A 0,7 (.94) 4 000 180 (7.09) 10 (.39) 2,4 (5.29) M14 PLP180B-40X 826716A 0,7 (.94) 4 000 180 (7.09) 10 (.39) 2,2 (4.85) M14 PA070-060BYI 6061047A 0,7 (.94) 6 000 180 (7.09) 10 (.39) 2,0 (4.41) M14 PA100-050BYI 6061047A 1,0 (1.34) 5 000 180 (7.09) 10 (.39) 2,7 (5.95) M14 Angle turbine polisher, with gear - DOUBLE THE POWER! HALF THE WEIGHT! • For the polishing of casted parts, welding seams and other materials using vulcan fiber disks • Oilfree and maintenance-free operation, exchange of vanes is not needed. Turbine motor does not require airline lubrication.

Optimal power to weight ratio, low air consumption • Perfect handling by means of an anti-vibration side handle and ergonomic shape, change-over to left-handed operation possible.

• High operating safety machine automatically shuts-off at overload - machine incorporates a safety lever and an integrated contact-protection that avoids the inadvertent contact of the grinding disk by the operator, which eliminates any subsequent injury.

• With integrated speed regulator PAT260-085BX 310687G 2,6 (3.5) 8 500 180 (7.09) 13 (.51) 2,2 (4.85) M14 Specifications at 90 psi (6,3 bar).

16

POLISHERS - Orbital Sander / Radial Polisher Excentric orbital polisher - for precision and demanding polishing in the automotive industry. This polisher is intended for the use with emery wheels (with Velcro), fabric wheels and polishing wheels.

Model

Part No.

Power output

Speed (no load)

Ø of emery wheel - min./max.

I.D. of air inlet hose

Weight without air connection

Spindle thread

kW (hp) min-1 (rpm) mm (in) mm (in) kg (lbs) Excentric polisher • For the exact, upscale polishing in applications, such as in the automotive industry, for polishing with fiber disks, buffing disks or for sanding using emery disks and velcro closures • Safety lever • With integrated speed regulator • Vane motor PLUE125/150 828312A 0,15 (.20) 12 000 125 / 150 (4.92 / 5.91) 10 (.39) 0,9 (1.98) 5/16"-24UNF

PLUE125/150

Specifications at 90 psi (6,3 bar).

Excentric orbital polisher with angle gear - for precision and demanding polishing in the automotive industry. This polisher is intended for the use with emery wheels (with Velcro), fabric wheels and polishing wheels.

Model

Part No.

Power output

Speed (no load)

Ø of emery wheel

I.D. of air inlet hose

Weight without air connection

Spindle thread

min-1 (rpm) mm (in) mm (in) kg (lbs) kW (hp) Excentric polisher • For the exact, upscale polishing in applications, such as in the automotive industry, for polishing with fiber disks, buffing disks or for sanding using emery disks and velcro closures. This polisher is suited especially for the use in mass production.

• Safety lever • With integrated speed regulator • With gear for optimal working-speeds and the best polishing operations • Vane motor PAE020-120BX 300157A 0,20 (.27) 12 000 75 (2.96) 6 (.24) 1,0 (2.2) 5/16"-24UNF

PAE020-120BX

Specifications at 90 psi (6,3 bar).

Advantages:  for industrial applications  highest power output at a low weight

 efficient and economical  ergonomic  highly durable  simple operation 17

DRILLS - Inline Design, Power Output 120 - 310 W (.16 - 4.16 HP) Drills - inline design - for the drilling of different materials in the aviation- and automotive industry as well as the machine building industry Model

DS012-005PC

Part No.

Power output

Speed (no load)

I.D. of air inlet hose

Weight without air connection

Rated torque

Max. Ø of drill bit

Collet - clamping range Collet - standard equipment [optional accessories]

kW (hp) min-1 (rpm) mm (in) kg (lbs) Nm mm (in) mm 120 W (.16 hp) Drill with collet (deburrer) - for vertical applications, push tu start, collets with M12x1, clamping diameter of 3 - 9,5 mm, deburring of holes up to 15-mm diameter, with commonly available burrs (90°). Spindle-lock for the simple locking and loosening of the drill bit.

Rated torque 4,5 Nm. With gears for the best operating speed and superior drilling results.

DS012-005PC 300032A 0,12 (.16) 500 6 (.24) 0,8 (1.76) 4,5 6 (.24) 8 [3; 3,175; 3,3; 4; 5; 6; 6,35; 7; 9; 9,5] Specifications at 90 psi (6,3 bar).

Model

DS029-045SXPB10

Part No.

Power output

Speed (no load)

I.D. of air inlet hose

Weight Drilling Drilling Chuck range / without air into into alu quick change chuck range connection steel to to kW (hp) min-1 (rpm) mm (in) kg (lbs) mm (in) mm (in) mm 290 W (.34 hp Midget drills with drill-chuck primarily for vertical applications. With gearing to achieve the optimal operating speed and to achieve the best-possible drilling result. Tapered chuck DIN 238 - B10, B12.

DS029-170SXPB10 3922131C 0,29 (.39) 17 000 6 (.24) 0,9 (1.98) 6 (.24) 0,5 - 6,5 / DS029-045SXPB10 3922131A 0,29 (.39) 4 500 6 (.24) 1,0 (2.20) 4 (.16) 6 (.24) 0,5 - 6,5 / 0,5 - 6 DS029-021SXPB12 3922131B 0,29 (.39) 2 100 6 (.24) 1,0 (2.20) 6 (.24) 8 (.31) 0,8 - 10 / 0,5 - 10 Specifications at 90 psi (6,3 bar).

Drills - inline design - for drilling, reaming and counter-sinking operations e.g. in machine building and construction industry for heavy-duty applIcations. The reversible drills can also be used for tapping and milling of pipes.

Model

DS070-014ZMK1

DS310-002YRMK5

Part No.

Power output

Speed (no load)

Drilling Reaming Tapping Milling of I.D. of air Weight MORSE into up to into steel pipes inlet hose without air taper steel to connection to kW (hp) min-1 (rpm) mm (in) mm (in) mm (in) mm (in) mm (in) kg (lbs) Drills with MORSE taper for the drilling, grating, counter-sinking, tapping and the milling of pipes. The model DS 070-014ZMK1 is equipped with a fist-grip; all other models have T-handles (with integrated twist-valve for start), located on the same axis. All drills (with T-handles) are equipped with spindle-feed and pilot wheel. With gears for the best operational speed and superior drilling results.

Right-rotating drills with MORSE taper 700 W (.94 HP) DS070-014ZMK1 3005661A 0,7 (.94) 1 400 15 (.59) 10 (.39) 3,5 (7.72) 1 Reversible drills, with MORSE taper 1,1 - 3,1 kW (1.48 - 4.16 HP) DS310-002YRMK5 3017171A 3,1 (4.16) 220 60 (2.36) 50 (1.97) 65 (2.56) 65 (2.56) 19 (.75) 34 (74.96) 5 5 DS310-001YRMK5 3017171B 3,1 (4.16) 150 80 (3.15) 75 (2.95) 100 (3.94) 120 (4.72) 19 (.75) 34 (74.96) Specifications at 90 psi (6,3 bar).

Advantages:  for industrial applications  ergonomic  optimum power-to-weight ratio  simple operation  high variability, customer-specific solutions

 highly durable 18

DRILLS - Angle-head Design, Power Output 200 W - 2,2 kW (.27 - 2.95 HP) Drills - angle-head design - for the optimum drilling of different materials - for the construction in the ship building- , aviation and automotive industry, as well as the machine building industry Model

Part No.

Power output

Speed (no load)

I.D. of air inlet hose

Weight Drilling Drilling into without air into steel alu connection to to

Chuck range

Drill chuck

Collet range

kW (hp)

min-1 (rpm) mm (in) kg (lbs) mm (in) mm (in) mm mm mm 200 - 350 W (.27 - .47 hp) Small drills equipped with either drill-chuck B10 or collet for drilling into steel, aluminium or other materials. With gears for the best operating speed and superior drilling results.

ON REQUEST: This drill series offers a modular design of 12 different speed varieties, collet, drill chuck B10, B12 or with 3/8-24 UNF thread. Safety lever or twist valve.

Drills with collet, angle-head 90° DA025-140SXC 3148954A 0,25 (.34) 14 000 6 (.24) 0,9 (1.98) 6 (.24) 3-6 DA035-036SXC 3149191B 0,35 (.47) 3 600 10 (.39) 1,0 (2.20) 6 (.24) 6 (.24) 3-6 DA035-140SXC 3149191A 0,35 (.47) 14 000 10 (.39) 1,0 (2.20) 6 (.24) 10 (.39) 3 -6 Drills with collet, angle-head 150° DC020-040SZC 3027201L 4 000 6 (.24) 0,8 (1.76) 3 (.12) 4,48 (.18) 3 - 4,8 Model

Part No.

Power output

Speed Drilling Reaming Tapping Milling of I.D. of air (no load) into steel up to into steel pipes inlet hose to to

DA035-036SXC

Weight without air MORSE connection taper

kW (hp) min-1 (rpm) mm (in) mm (in) mm (in) mm (in) mm (in) kg (lbs) Drills with MORSE taper for drilling, reaming and counter-sinking operations in tight access areas. When using these drills with the optional available grip-tube, these drills may also be used as a universal drill with equally beneficial results. All angle-drills are equipped with a feedspindle that is also used for the removal of the drill bit. As an optional feature, we can offer the models DA 150 to DA 220 with a ratchet instead of the pilot-wheel. For extreme tight access areas, we offer reduced profile drill designs, without feed-spindle or pilot-wheel. All models of the design DA 150 to DA 220 are additionally equipped with a speed-regulator, which helps to reduce the air consumption when idling.

Right-rotating drills with MORSE taper 480 W - 2,2 kW (.64 - 2.95 hp) DA048-010YMK1 3014471A 0,48 (.64) 1 000 15 (.59) 12 (.47) 10 (.39) 2,9 (6.39) 1 DA150-004YMK2 3010671A 1,5 (2.01) 400 23 (.91) 18 (.71) 15 (.59) 8,3 (18.30) 2 DA210-004YMK3 3010681A 2,1 (2.82) 400 32 (1.26) 27 (1.06) 15 (.59) 11,7 (25.79) 3 DA220-003YMK4 3010691A 2,2 (2.95) 300 50 (1.97) 36 (1.42) 19 (.75) 13,9 (30.64) 4 Reversible drills with MORSE taper 2,2 kW (2.95 hp) DA220-004YRMK4 3010701A 2,2 (2.95) 400 55 (2.17) 50 (1.97) 40 (1.57) 55 (2.17) 19 (.75) 17 (37.48) 4 5 DA220-002YRMK5 3015531A 2,2 (2.95) 180 80 (3.15) 75 (2.95) 80 (3.15) 120 (4.72) 19 (.75) 21,7 (47.84)

DA220-004YRMK4

DA048-010YB16

Specifications at 90 psi (6,3 bar).

DA220-003YMK4

Advantages:  for industrial applications  ergonomic  optimum power-to-weight ratio  simple operation  various angle-heads (90°, 150°)  customer-specific solutions (modular) 19

DRILLS - Pistol-Grip, Power Output 170 W - 1,85 kW (.23 - 2.48 HP) Drills with pistolgrip - for the optimum drilling of different materials - for the operation in the aviation- and automotive industry, as well as the machine building industry Model

DP017-040ZB10

PV6A

PV16B

DP060-037ZP3/8"

PV32A-04X

Part No.

Power output

Speed (no load)

Drilling into steel to

Drilling into alu to

I.D. of Weight air inlet without air hose connection

Chuck range

Drill chuck / Spindle thread

kW (hp) min-1 (rpm) mm (in) mm (in) mm (in) kg (lbs) mm Robust drills with pistolgrip for the manual drilling into metal, wood, plastics and other materials. These drills are available in two different designs, offering the best-possible handling - with offset handle design for pressure into the drill-axis mainly used for horizontal applications (type DP 040-...) or with pistolgrip design to absorb a higher torque (type DP 017-...). Drills of type PV...H - with combined air-and exhaust hose - best suited in areas where there is a dusty environment and where a clean environment is desired. Many drills allow for right - or left location through a reversible motor.

DP017-040ZB10 3020181A 0,17 (.23) 4 000 4 (.16) 6 (.24) 6 (.24) 0,6 (1.32) 0,5 - 6 B10 / PV6A 826290A 0,21 (.28) 5 000 6 (.24) 6 (.24) 8 (.31) 0,7 (1.54) 0,5 - 6 B10 / PV6AH 6060081A 0,21 (.28) 5 000 6 (.24) 6 (.24) 8 (.31) 0,7 (1.54) 0,5 - 6 B10 / PV6A-B 830500A 0,21 (.28) 5 000 6 (.24) 6 (.24) 8 (.31) 0,7 (1.54) 0,5 - 6 - / 3/8"x24 PV6A-BH 6060082A 0,21 (.28) 5 000 6 (.24) 6 (.24) 8 (.31) 0,7 (1.54) 0,5 - 6 - / 3/8"x24 PV6E 826290B 0,21 (.28) 5 000 6 (.24) 8 (.31) 8 (.31) 0,7 (1.54) 0,5 - 10 Q - / 3/8"x24 PV6EH 6060083A 0,21 (.28) 5 000 6 (.24) 8 (.31) 8 (.31) 0,7 (1.54) 0,5 - 10 Q - / 3/8"x24 DP029-170ZPB10 3027101F 0,29 (.39) 17 000 6 (.24) 6 (.24) 0,9 (1.98) 0,5 - 6,5 B10 / DP029-045ZPB10 3027101A 0,29 (.39) 4 500 4 (.16) 6 (.24) 6 (.24) 0,9 (1.98) 0,5 - 6,5 B10 / 1) B10 / DP029-045ZB10Q 3027101C 0,29 (.39) 4 500 4 (.16) 6 (.24) 6 (.24) 1,2 (2.65) DP029-021ZPB12 3027101B 0,29 (.39) 2 100 6 (.24) 8 (.31) 6 (.24) 1,0 (2.20) 0,8 - 10 B12 / 2) B12 / DP029-021ZB12Q 3027101D 0,29 (.39) 2 100 6 (.24) 8 (.31) 6 (.24) 1,0 (2.20) DP029-015ZPB12 3027101E 0,29 (.39) 1 500 8 (.31) 10 (.39) 6 (.24) 1,0 (2.20) 0,8 - 10 B12 / DP029-007ZPB12 3027101G 0,29 (.39) 700 10 (.39) 6 (.24) 1,0 (2.20) 0,8 - 10 B12 / DP029-004ZPB12 3027101H 0,29 (.39) 350 10 (.39) 6 (.24) 1,0 (2.20) 0,8 - 10 B12 / DP030-020ZRB12 6061165A 0,3 (.4) 2 000 6 (.24) 8 (.31) 8 (.31) 1,0 (2.20) 1 - 10 B12 / PV13C 830500B 0,35 (.47) 350 13 (.51) 13 (.51) 10 (.39) 2,0 (4.41) 2 - 13 - / 1/2"20 UNF DP040-005ZB16 302965A 0,4 (.54) 470 13 (.51) 13 (.51) 10 (.39) 2,3 (5.07) 1 - 13 B16 / PV13B 826291A 0,5 (.67) 1950* 13 (.51) 13 (.51) 10 (.39) 2,5 (5.51) 2-13 Q - / 1/2"20 UNF PV16B 826292A 0,5 (.67) 850* 16 (.63) 23 (.91) 10 (.39) 3,2 (7.05) 3 - 16 B16 / DP060-037ZP3/8" 6061155A 0,6 (.8) 3 700 10 (.39) 10 (.39) 10 (.39) 1,1 (2.65) 0,8 - 10 - / 3/8"x24 DP060-060ZP3/8" 6061155B 0,6 (.8) 6 000 10 (.39) 10 (.39) 10 (.39) 1,1 (2.65) 0,8 - 10 - / 3/8"x24 PVR32A-04X 830500C 1,45 (1.94) 380 32 (1.26) 32 (1.26) 19 (.75) 9,5 (20.94) Morse 3 / PV32A-04X 827119A 1,85 (2.48) 380 32 (1.26) 32 (1.26) 19 (.75) 9,5 (20.94) Morse 3 / * Reduction of free speed by 25% possible 1) The drill is equipped with a quick-change drill chuck (capacity 0 - 6,5 mm) 2) The drill is equipped with a quick-change drill chuck (capacity 0 - 8 mm) Remark: Q - quick change chuck

Specifications at 90 psi (6,3 bar).

Advantages:  for industrial applications  optimum power-to weight ratio

 ergonomic  simple operation  reversible 20

DP 029-021ZPB12 DP029-015ZPB12

DP040-005ZB16

TAPPERS - Inline Design / Pistol-Grip, Power Output 150 - 700 W (.20 - .94 HP) Tappers - for the tapping of threads, as well as the cleaning of threads in materials such as steel, aluminum and other alloys for applications in the automotive- and machine building industries.

The tappers are equipped with a flexible chuck that perfectly guides the tap-insert and cuts a straight thread, even if the tapper is held at a slight angle.

Model

Part No.

Power output

Speed (no load) rechts

Speed (no load) links

Tapping into steel

Tapping into alu

kW (hp) min-1 (rpm) min-1 (rpm) mm mm Tappers - inline design • Start and reverse by toggle lever or dual-trigger • For right / left thread cutting, suitable for cutting of blind hole (optional accessories) • The reverse trigger is activated by push-pull at almost double the speed • Ideal tools for vertical applications • The exchange of the tap-insert is easily done by a quick-change chuck.

DS040-007BXRB12 3027701A 0,25 (.34) 650 1 120 M6 M8 DS070-003BXRB16 3028501B 0,7 (.94) 320 550 M14 M16 Tappers - pistolgrip • Start and reverse by trigger • For right / left thread cutting, suitable for cutting of blind hole (optional accessories) • For different tapping applications DP015-006ZRB10 3235131C 0,15 (.20) 620 660 M5 M6 DP030-007ZRB12 3023731A 0,3 (.40) 650 550 M8 M10 DP040-003ZRB16 302964 A 0,4 (.54) 300 250 M14 M14

I.D. of air inlet hose mm (in)

Weight Tap Taper without air holder DIN 238 connection capacity kg (lbs)

mm

mm DS070-003BXRB16

6 (.24) 10 (.39)

1,5 (3.31) 2,9 (6.39)

3-9 3-9

B12 B16

6 (.24) 6 (.24) 10 (.39)

0,8 (1.76) 1,5 (3.31) 2,4 (5.29)

3-9 3-9 3-9

B10 B12 B16

DP015-006ZRB10

Specifications at 90 psi (6,3 bar).

DS040-007BXRB12 DP040-003ZRB16

Advantages:  for industrial applications  highly durable  simple operation  reversible  optimum power-to-weight ratio 21

IMPACT TOOLS - with Pistol-Grip / with Fist-Grip Impact tools - for the effective tightening and loosening of fasteners or screws, size M8 to M45 in mass-production environments, which demand high performance, utmost reliability and operational efficiency in the automotive- and machine building industries Model

SMP110-3/4"ZA

PSR16

Part No.

For screw

Max. torque capability

Speed (no load)

Impacts

I.D. of air inlet hose

Weight without air connection

Nm (ft.lbs) Nm (ft.lbs) min-1 (rpm) Hz mm (in) kg (lbs) Impact tools - with pistolgrip, 3-step torque adjustment • Maximum power - maximum efficiency - ideal for repetitive production e.g. in the automotive industry • The special robust construction of our impact tools assures a reliable operation in industrial areas with 24/7 operations.

SMP030-1/2"ZA 6061166A M10 - M16 300 (221) 120 - 260 (89 - 192) 15 000 20 10 (.39) 1,5 (3.31) SMP085-1/2"ZA 6061149A M12 - M22 850 (627) 200 - 650 (148 - 480) 9 900 23 10 (.39) 2,5 (5.51) SMP110-3/4"ZA 6061210A M10 - M30 1 100 (811) 150 - 920 (111 - 679) 6 000 15 12 (.47) 4,7 (10.36) Impact tools - with pistolgrip • Maximum power - maximum efficiency - ideal for repetitive production e.g. in the automotive industry • The special robust construction of our impact tools assures a reliable operation in industrial areas with 24/7 operations.

PSR16 826319A M10 - M16 260 (192) 10 000 18 10 (.39) 2,3 (5.07) PSR24 826320A M14 - M24 680 (502) 16 500 16 10 (.39) 4,0 (8.8) Impact tool - with fistgrip, 3-step torque adjustment • Maximum power - maximum efficiency - ideal for repetitive production e.g. in the automotive industry • The special robust construction of our impact tools assures a reliable operation in industrial areas with 24/7 operations.

SMS265-1"ZA 6061222A M24 - M45 2 650 (1963) 1 200 - 2 500 (889 -1852) 6 000 13 16 (.63) 10,4 (22.93)

SMS265-1"ZA

Specifications at 90 psi (6,3 bar).

3-step torque adjustment

Our impact tools are equipped with a 3-level power limiter, where the first setting is the max.torque, the second setting reduces the torque to 50% and the third setting corresponds to 30% of the max. torque.

Advantages - impact tools:  for industrial applications  high power (TwinHammer impact

mechanism, revolutionary motor design)

 ergonomic execution  efficient  3-step torque adjustment  low weight  low vibration and emission level  maximum life-time and reliability 22

Working torque range

SMP085-1/2"ZA

HAMMERS - Chipping Hammers, Riveting Hammers We offer all kinds of air tools for quarries, construction and foundries. Select the most suitable hammer in accordance with the necessary application:      

Chisel and demolition work, jointing, plastering Cleaning of casted parts, removal of cast-on sections Removal of rust on large areas Crushing of semi-solid and loose materials, such as concrete, pavement, stonework, etc.

Stamping of formed and bulk materials, such as used in the mold and cast industry Simple and complicated demolition, caulking, trimming, breaking, removal of plaster and different kinds of floor coverings, for the removal of casting flash

Advantages: 

for industrial applications 

highly durable 

simple operation 

robust

Chipping hammers - for light breaking through walls, for demolition, mortising, removal of plaster, as well as for cleaning of castings and for the detaching of cast-sections, the smaller hammers are primarily used in the die casting-, container construction-, ship building-, bridge-, aviationand construction industry, as well as in foundries and welding shops Riveting hammers - for rivet busting and rivet-removal in the steel-construction, in boilers, containers and on ships.

Model

Part No.

Type of chisel shank

Impacts

Rivet-Ø - alu

Rivet-Ø - steel

I.D. of air inlet hose

Weight without air connection

mm min-1 (rpm) mm (in) mm (in) mm (in) kg (lbs) Chipping and riveting hammers, with protection cap Our hammers are used in the die casting-, container construction, ship building-, bridge- and construction industry, as well as in foundries and welding shops, and for rivet busting and rivet-removal in the steel-construction, in boiler, containers and on ships etc.

With pistolgrip HC007-R10P 2104091A Ø 10,3x36 4 000 6 (.24) 0,7 (1.54) HC007-HR12P 2104091B Ø-hex. 11,7/10x36 4 000 6 (.24) 0,7 (1.54) HC008-R10P 2103682A Ø 10,3x36 3 500 3 (.12) 2 (.08) 6 (.24) 0,8 (1.76) HC008-HR12P 2103682B Ø-hex. 11,7/10x36 3 500 3 (.12) 2 (.08) 6 (.24) 0,8 (1.76) Fist grip design HC010-HR14D 2103441B Ø-hex. 14,3/12,5x50 3 000 5 (.20) 3 (.12) 10 (.39) 1,9 (4.19) HC023-R14D 2103461A Ø 14,3x50 2 000 6 (.24) 5 (.20) 10 (.39) 2,3 (5.07) HC023-HR14D 2103461B Ø-hex. 14,3/12,5x50 2 000 6 (.24) 5 (.20) 10 (.39) 2,3 (5.07) Riveting hammer with retainer spring - for rivet busting and rivet-removal in the steel-construction, in boilers, containers and ships, especially for extrem riveting works HCD140-R31V 8119841A Ø 31x70 750 25 (.98) 25 (.98) 16 (.63) 13,8 (30.42) Chipping hammers - in the building industry (light chipping- and demolition work, grooving, cleaning-off, plaster removal), foundry industry (cleaning of castings, chipping of discard beads and welds), and in stone industry (wedging, dressing etc.). Our chipping hammer of type HC 040-H19B is equipped with a needle scalling-down hammer, that is designed as an adapter within the framework of optional accessories - primarily for removal of rust from larger flat surfaces and of the undesirable deposits on stone buildings, sculptures, bridges, etc.

Inline design HC010-H10B 6060006A hex. 10x25 9 000 6 (.24) 1,0 (2.20) With pistolgrip HC012-H14B 831332A hex. 14x25 4 500 8 (.31) 1,2 (2.65) With lever HC040-H19B 6060008A hex. 19x50 2 700 13 (.51) 4,0 (8.82) HC040-R20B 6060008C Ø 20x60 2 700 13 (.51) 4,0 (8.82) HC040-HR20B 6060008B hex. Ø 20/17x60 2 700 13 (.51) 4,0 (8.82) HC050-H19B 6060009A hex. 19x50 2 500 13 (.51) 5,0 (11.02) HC050-R20B 6060009C Ø 20x60 2 500 13 (.51) 5,0 (11.02) HC050-HR20B 6060009B hex. Ø 20/17x60 2 500 13 (.51) 5,0 (11.02) HC057-H19B 6060010A hex. 19x50 2 100 13 (.51) 5,7 (12.57) HC057-R20B 6060010C Ø 20x60 2 100 13 (.51) 5,7 (12.57) HC057-HR20B 6060010B hex. Ø 20/17x60 2 100 13 (.51) 5,7 (12.57) With retainer spring HC080-R20V 8119811C Ø 20x60 1 200 13 (.51) 7,8 (17.20) HC 080-HR20V 8119811E hex. Ø 20/17x60 1 200 13 (.51) 7,8 (17.20)

HC008-R12P

HC008-R10P

HC010-H10B

HC012-H14B

HC040-H19B

HC080-HR20V

Specifications at 90 psi (6,3 bar).

23

HAMMERS - Pick Hammers, Spade (breaking) Hammers, Impact Hammers, Scaler Pick hammers - with drill-, or flat chisels to demolish stonework and concrete, for the use in roadconstruction and tunneling, as well as in mining Model

HP090-H22B

Part No.

Type of chisel shank

Impacts

I.D. of air inlet hose

Weight without air connection

mm min-1 (rpm) mm (in) kg (lbs) Pick hammers - due to the weight of these hammers, it is possible to work in a vertical- or inclined plane - in quarries and in the building industry HP090-R25B 6060011A Ø 25x75 1 590 16 (.63) 9,0 (19.84) 1 590 16 (.63) 9,0 (19.84) HP090-H22B 6060012A hex. 22x82 1 590 16 (.63) 9,0 (19.84) HP100-H22B 6060013A hex. 22x82 Ø 25x75 2 040 16 (.63) 10,0 (22.05) HP100-R25V 6060014A Ø 25x75 1 200 16 (.63) 10,3 (22.71) HP101-R25B 2501841A Ø 25x75 1 200 16 (.63) 10,3 (22.71) HP101-R25D 2501841B Ø 25x75 1 260 16 (.63) 12,0 (26.46) HP120-R25V 6060015A Ø 25x75 1 260 16 (.63) 13,0 (28.67) HP130-R25B 6060016A Specifications at 90 psi (6,3 bar).

Impact hammers - for the forming of materials, especially in the foundries and wherever bulk materials need to be compacted Model

HR085-R60V

HR042-MK2B

Part No.

Impacts

Piston stroke

Piston-Ø

MORSE taper I.D. of air inlet Weight without hose air connection

min-1 (rpm) mm (in) mm (in) mm (in) kg (lbs) Impact hammers with MORSE taper - The rammers are used in many applications, such as the scaling of forgings when used with tampered- or rubber butts, the cleaning of Open-Hearth- or Electric Ovens, for the compacting of concrete and dirt during construction, as well as for fabrication in the cement- and stone production. The light-weight rammer HR 042-MK2B is also well-suited for operation in the core production. The hammer HR 025-R40B is especially suitable for table-top operation or for small surfaces, e.g. for ramming small core boxes, etc. Other hammers are used for ramming mold materials and wherever loose materials is being processed. Your advantage of design V: Low vibrations.

HR025-R40B 6060020A 1 200 80 (3.15) 20 (.63) 10 (.39) 2,5 (5.51) HR085-R60V 6060021A 870 220 (8.67) 32 (1.26) 2 13 (.51) 8,5 (18.74) HR105-R60V 6060022A 780 140 (5.51) 36 (1.42) 2 13 (.51) 10,5 (23.15) HR042-MK2B 2701441A 850 120 (4.72) 28 (1.10) 2 13 (.51) 4,2 (9.26) HR069-MK2B 2701091A 850 120 (4.72) 28 (1.10) 2 13 (.51) 6,9 (15.21) HR093-MK2B 2701571A 650 160 (6.30) 32 (1.26) 2 13 (.51) 9,3 (20.50) Specifications at 90 psi (6,3 bar).

Scaler - in construction areas, for light concrete breaking, de-calking, cutwork, removal of plaster and all kinds of floor coverings, but also for other areas, such as the de-barking of trees or removal of burrs and street asphalt Model

HS043-H19B

Part No.

Type of chisel shank

Impacts

I.D. of air inlet hose

Weight without air connection

min-1 (rpm) mm (in) kg (lbs) mm Scaler - a wide range of applications on the basis of selected tools (e.g. light demolition works, grooving, punching, removal of chips in foundries, etc.)

HS043-H19B 6060023A hex. 19x50 2 700 13 (.51) 8,5 (18.74) Specifications at 90 psi (6,3 bar).

24

NEEDLE SCALERS - Inline Design, Pistol-Grip Needle scalers - for the removal of welding seems, for de-rusting of steel constructions and containers, for removal of paint and scale, for the cleaning of castings, for the cleaning of facades in construction and for the abrading of concrete Model

Part No.

Needle quantity

Needles dimensions

Impacts

I.D. of air inlet hose

Weight without air connection

pcs

mm (in)

min-1 (rpm)

mm (in)

kg (lbs)

4 000

10 (.39)

2,4 (5.29)

4 000 4 000 4 500

10 (.39) 10 (.39) 10 (.39)

1,4 (3.09) 2,7 (5.95) 3,5 (7.72)

Needle scaler - inline design • For light- and semi-heavy applications • For applications where a pistol grip cannot reach the location to be fabricated SN23 831125A 12 Ø 3x180 (Ø.12x7.09) Needle scalers with pistol grip • For material removal, de-rusting and for simple cleaning operations (type SN 10) • For semi-heavy operations (type SN 25) • For heavy-duty operations (type SN 30) SN10 831124A 29 Ø 2x150 (Ø.08x5.91) SN25 831126A 23 Ø 3x180 (Ø.12x7.09) SN30 831127A 28 Ø 3x180 (Ø.12x7.09)

SN23

SN25

Specifications at 90 psi (6,3 bar).

SN30

Advantages:  for industrial applications  highly durable  high power and low vibrations  ergonomic

25

SHEET METAL TOOLS - Metal Shears Metal shears - for the entire sheet-metal industry, for the processing of metals in the automotive-, container-, and shipbuilding industry, as well as in body shops. The shears can be used for either straightor curved incisions and are especially well-suited for the cutting of metal sheets and coils Model

S16-320Y

Part No.

Power output

Max. metal thickness mm (in) Steel metal Steel metal Steel metal Aluminium up to up to up to up to 400 N/mm2 600 N/mm2 800 N/mm2 250 N/mm2

Smallest cutting radius

I.D. of air inlet hose

Weight without air connection

kW (hp) mm (in) mm (in) kg (lbs) Metal shears - with a material cutting capacity up to 2,5 mm, twist valve, cutting of curved surfaces is possible, perfect cutting accuracy S16-320Y 3240971C 0,32 (.43) 1,6 (.06) 1,2 (.05) 1 (.04) 2 (.08) 15 (.59) 6 (.24) 1,6 (3.53) S20-180Y 3388471A 0,32 (.43) 2 (.08) 1,6 (.06) 1,4 (.06) 2,5 (.10) 20 (.79) 6 (.24) 1,9 (4.19) Specifications at 90 psi (6,3 bar).

Advantages:  high cutting speed  optimum straight

and curve workability

 no deforming of the cut material

 highly durable  ergonomic 26

S20-180Y

PLIERS - for Cutting Pneumatic pliers for the use of:     

Cutting Cu, Al, Ag, plastic materials (PVC, PF) and steel max. 400 N/mm2/ 25 long tons/sq.in Simultaneous cutting and wire-end flattening or Simultaneous cutting and 90°angle forming of wire ends of electronic components Pressing of cable joints Pliers are suited especially for the use in mass production, where a person can suffer sustained, long-lasting and monotonous stress in performing tasks such as assembling clips or cutting wires with manual tools. Such working conditions may result in RSI (repetitive strain injury). By replacing manual tools with our pneumatic pliers the workers will be protected against negative effects of mass production workplace.

Pliers for sealing and stamping seals

DEPRAG CZ a.s. offers air pliers for sealing and stamping seals.

For more information contact please our product specialists.

Pliers for cutting - for the industrial use for example in series production, in the automotive industry, in machine building industry, in the appliance industry as well as in maintenance and assembly departments Model

Part No.

Pliers insert, mounted

Weight (without plier insert)

I.D. of air inlet hose

(optional accessories - see side 27) kg (lbs) mm (in) Pliers for cutting - with trigger and integrated lever-lock to avoid unintentional start • For the cutting of copper, aluminum, beryllium, silver, thermo/duroplast and steel • Special pliers for cutting as well as for other operations (e.g. wire-end flattening; 90°angle forming or wire ends of electronic components) P0181Z-C00 8076711A no (plier insert I18.)

0,08 (.18) 6 (.24) P0241Z-C00 8076721A no (plier insert I24.)

0,15 (.33) 6 (.24) P1361Z-C00 6061207A no (plier insert I36.)

0,48 (1.06) 6 (.24) P1362Z-C00 6061208A no (plier insert I36.)

0,59 (1.30) 6 (.24) P0452Z-C00 8076901A no (plier insert I45.)

1,04 (2.29) 6 (.24) Pliers for cutting, with safety lever, for heavy-duty applications - for increased longevity • For the cutting of copper, aluminum, beryllium, silver, thermo/duroplast and steel • Special pliers for cutting as well as for other operations (e.g. wire-end flattening; 90°angle forming or wire ends of electronic components) P0282X-C00 8249651A no (plier insert I28.)

0,5 (1.10) 6 (.24) P0283X-C00 8249651C no (plier insert I28.)

0,6 (1.32) 6 (.24) P0382X-C00 8272051A no (plier insert I38.)

0,65 (1.43) 6 (.24) P0383X-C00 6061225A no (plier insert I38.)

0,8 (1.76) 6 (.24) P0452X-C00 8258171B no (plier insert I45.)

1,0 (2.20) 6 (.24) P0453X-C00 8258171A no (plier insert I45.)

1,15 (2.53) 6 (.24)

P0241Z-C00

P0452Z-C00

Specifications at 90 psi (6,3 bar).

P1361Z-C00

P0453X-C00

Advantages:  high power, maximal cutting power up to 11 850 N

 simple operation  highly durable  pliers inserts are available in two executions

27

PLIER INSERTS for Cutting Pliers (Optional Accessories) DEPRAG plier inserts are available with straight- or angled cutting blades. They can be designed for angled cuts or straight cuts and are even available as replaceable triangular cuts. To cut metals, one side of the insert is machined as an edge and the other is designed to be the counter-holder (the anvil). Synthetic materials require a different cutting technology: Both sides of the insert are designed with an edge.

Type of Max. inserts opening Part No. plier insert mm (in) for type P0181Z-C00 I18C00 822306 3,2 (.13) I18C00H2 6950285 3,2 (.13) I18C00HK2 6950286 3,2 (.13) I18C25 6950133 3,2 (.13) I18C25H2 6950287 3,2 (.13) I18C25HK2 6950271 3,2 (.13) for type P0241Z-C00 I24C00 807679 5 (.20) I24C00H2 6950288 5 (.20) I24C00HK2 826648 5 (.20) I24C21 807678 5 (.20) I24C21H2 6950289 5 (.20) I24C21HK2 807809 5 (.20) for type P0282X-C00, P0283X-C00 I28C00 829827 9,5 (.37) I28C00H2 6950290 9,5 (.37) I28C00HK2 6950165 9,5 (.37) I28C30 826268 9,3 (.37) I28C30H2 6950291 9,3 (.37) I28C30HK2 829826 9,3 (.37) for type P1361Z-C00, P1362Z-C00 I36C00 807681 14,5 (.57) I36C00H2 6950071 14,5 (.57) I36C00HK2 807389 14,5 (.57) I36C25 6950073 14,5 (.57) I36C25H2 6950072 14,5 (.57) I36C25HK2 807528 14,5 (.57) for type P0382X-C00, P0383X-C00 I38C00 829830 15 (.59) I38C00H2 6950292 15 (.59) I38C00HK2 827204 15 (.59) I38C25 829829 11,5 (.45) I38C25H2 832172 11,5 (.45) I38C25HK2 827418 11,5 (.45) for type P0452Z-C00, P0452X-C00, P0453X-C00 I45C00 807692 10,5 (.41) I45C00H2 6950214 10,5 (.41) I45C00HK2 6950137 10,5 (.41) I45C30 6950159 10,5 (.41) I45C30H2 6950293 10,5 (.41) I45C30HK2 801234 10,5 (.41)

Cutting angle *)

Cutting capacity - Ă˜ **) mm (in)

Cutting geometry see below

without angle without angle without angle 25 25 25

3 (.12) 3 (.12) 3 (.12) 2,8 (.11) 2,8 (.11) 2,8 (.11)

A B C A B C

without angle without angle without angle 21 21 21

2 (.08) 4,5 (.18) 4,5 (.18) 3 (.12) 4,5 (.18) 3 (.12)

A B C A B C

without angle without angle without angle 30 30 30

8 (.31) 8 (.31) 8 (.31) 8 (.31) 8 (.31) 8 (.31)

A B C A B C

without angle without angle without angle 25 25 25

12 (.47) 12 (.47) 12 (.47) 12 (.47) 12 (.47) 12 (.47)

A B C A B C

without angle without angle without angle 25) 25) 25

12,5 (.49) 12,5 (.49) 12,5 (.49) 9 (.35) 9 (.35) 9 (.35)

A B C A B C

without angle without angle without angle 30 30 30

9 (.35) 9 (.35) 9 (.35) 9 (.35) 9 (.35) 9 (.35)

A B C A B C

**) The stated value is just a theoretical figure, describing the max. diameter which can be inserted in the plier inserts. This value is derived from the geometrical dimensions and does not mean that the pliers are able to cut it. The max. cutting diameter depends on the material.

*) Cutting angle

We offer other special custom-made plier inserts to fit your application.

Cutting geometry

A Application: Plastics, copper, soft aluminium, small cross-sections, steel Characteristics: Both jaw inserts made from hardened material, upper jaw has a sharp edge, lower jaw is flat (no edge)

28

H2

B

Application: Hard, reinforced plastics (GFK), steel (limited), reinforced cooper, larger cross-sections Characteristics: Both jaw inserts made from hardened material, both jaws have an edge in V-form

HK2

C

Application: Hard, reinforced plastics (GFK), reinforced copper, larger cross-sections, for flush cuts Characteristics: Both jaw inserts made from hardened material, both jaws have a sharp edge

PLIERS - for Mounting of CLIC-, Hose-, COBRA- or Spring Clamps Pliers to mount clamps - for the industrial use for example in mass-production, in the automotive industry, in machine building industry, in the appliance industry as well as in maintenance and assembly departments Model

Part No.

Width of clamp

Insert opening, adjustable

Max. opening width

Min. closing width

Weight (with plier insert)

I.D. of air inlet hose

mm (in) mm (in) Pliers for CLIC-clamps • With safety lever • With integrated plier inserts P0383X-P00-I90CL06 8215721A 6 (.24) yes 20 (.63) P0383X-P00-I90CL08 8215721B 8 (.31) yes 20 (.63) Pliers for hose-clamps • With safety lever • With integrated plier inserts For hose clamps: dia. up to 50 mm (1.97 in) P0383X-S00-I90R08 8298331B 7,5 (.30) yes 13 (.51) P0384X-S00-I90R10 8298331C 10 (.39) yes 13 (.51) For hose clamps: dia. 50 mm up to 100 mm (dia. 1.97 in up to 3.94 in) P0451X-S00-I90R 8074721B yes 12 (.47) P0452X-S00-I90R 8074731A yes 12 (.47) Pliers for COBRA-clamps • With safety lever • With integrated plier inserts P0383X-P00-I90CO 6061212A 9 (.35) yes 23 (.91) Pliers for spring-clamps • With safety lever • With integrated plier inserts For spring clamps: dia. up to 50 mm (1.97 in) P0383X-P00-IFE 8247811A yes 62 (2.44) For spring clamps: dia. 50 mm up to 100 mm (dia. 1.97 in up to 3.94 in) P0452X-P00-IFE 8074741A yes 70 (2.80)

mm (in)

kg (lbs)

mm (in) P0383X-P00-I90CL08

2,5 (.10) 2,5 (.10)

0,75 (1.65) 0,75 (1.65)

6 (.24) 6 (.24)

P0383X-S00-I90R08

0,8 (.03) 0,8 (.03)

0,65 (1.43) 0,75 (1.65)

6 (.24) 6 (.24)

0,8 (.03) 0,8 (.03)

1,0 (2.20) 1,2 (2.65)

6 (.24) 6 (.24) P0383X-P00-I90C0

6,5 (.26)

0,6 (1.32)

6 (.24)

5 (.20)

0,75 (1.65)

6 (.24)

5 (.20)

1,25 (2.76)

6 (.24)

P0383X-P00-IFE

Specifications at 90 psi (6,3 bar).

Clamps:

CLIC-clamp

Hose-clamp

COBRA-clamp

Spring-clamp

P0383-P00-I90CO

P0383X-P00-IFE

Advantages:  high power, maximal

squeeze force up to 4 500 N

 simple operation  highly durable

29

SAWS - Jig Saws, Chain Saw Jig Saws - for hand-guided cutting of different materials, especially metals and plastics e.g. in the machine building or in the wood-fabricating industry Model

PPP35AX

Part No.

Power output

Strokes per min. (no load)

Stroke of saw blade

Max. length of saw blade

Dimensions of saw blade (standard equipment)

I.D. of air inlet hose

Weight (without clamping device) kg (lbs)

kW (hp) min-1 (rpm) mm (in) mm (in) mm (in) mm (in) Jig saw - for cutting of metal- and plastic components • For the cutting of supports, pipes, cables • The saw can be equipped with an integrated clamping device which allows deeper cutting - up to 300 mm (11.81 in).

• Integrated speed regulator assures perfect and constant cutting conditions 300x27x1,6 PPP35AX 830503A 1,1 (1.48) 380 68 (2.68) 350 (13.78) 19 (.75) 9,0 (19.84) (11.81x1.06x.06) Specifications at 90 psi (6,3 bar).

Model

SS150-280BX

Part No.

Power output kW Strokes Stroke Max. length Dimensions I.D. of Weight (hp) per min. of saw of saw of saw blade air inlet (without (no load) blade blade (standard hose clamping air air equipment) device) pressure pressure 65 psi 90 psi -1 mm (in) mm (in) mm (in) kg (lbs) (4,5 bar) (6,3 bar) min (rpm) mm (in) Jig saw - for cutting in potentially explosive environments • All-metal jig saw primarily for use in potentially explosion hazardous environments (mining) • The saw can be equipped with an integrated clamping device which allows deeper cutting - up to 300 mm (11.81 in).

• Integrated speed regulator assures perfect and constant cutting conditions 300x27x1,6 SS150-280BX 6060835A 0,9 (1.21) 1,5 (2.01) 280 *) 68 (2.68) 400 (15.75) 19 (.75) 10,8 (23.81) (11.81x1.06x.06) *) Recommended number of cycles for cutting of steel of class 11 with cutting speed 27 m/min: 200 min-1.

Specifications at 90 psi (6,3 bar).

Chain saw - for the cutting of different materials for varying applications in heavy-duty 24/7 industrial operations, such as the machine building- or in the wood-fabricating industry; the saw can also be used in explosion hazardous environments Model

SH150-180BX

Part No.

Power output

Speed (no load)

Max. length of chain bar

Max. cutting diameter

I.D. of air inlet hose

Weight without air connection

kW (hp) min-1 (rpm) mm (in) mm (in) mm (in) kg (lbs) Chain saw - ATEX-compliant IM2cXIIGcIIBT4 (130°C) X • Chain saw - for a 24/7 operation in both industrial- and manual operations, such as machine building, the wood-fabricating industry and even for the use in potentially explosive environments • High power output, high cutting speed • With integrated hand-safety, safety chain brake • Automatic chain lubrication • Possible motor speed regulation by lever • Simple to operate and maintain 340 (13.39) one side SH150-180BX 6061125A 1,5 (2.01) 18 000 350 (13.78) 16 (.63) 7,6 (16.75) 690 (27.17) both sides Operating pressure - NON EX-area: 90 psi (6,3 bar) Operating pressure - EX-area: 58 psi (4 bar)

Advantages:  for industrial applications  highly durable  high cutting speed  robust  user friendly and powerfull 30

PPP35AX SH150-180BX

EXPLOSIVE ENVIRONMENT AIR TOOLS - ATEX-compliant Impact tools - for the quick and low-fatigue tightening & loosening of screws from M10 to M36; these impact tools are specially well-suited for the tightening of screws in the assembly and maintenance sector, which may also be located in explosive hazardous environments Model

Part No.

For screw

Max. torque capability

Speed (no load)

Impacts

Square drive size

I.D. of air inlet hose

Weight without air connection

Nm min-1 (rpm) Hz in mm (in) kg (lbs) Impact tools - with pistolgrip - ATEX-compliant IM2cXII2GDcIICT6(80°C)X, without 3-step torque adjustment • Safety lever / trigger SMP026-1/2"ZEX 6061104A M10 - M16 260 10 000 14 1/2" 10 (.39) 2,3 (5.07) SMP068-3/4"ZEX 6061097A M14 - M24 680 6 500 14 3/4" 10 (.39) 4,0 (8.82) SMP140-3/4"XEX 6061105A M16 - M30 1 400 4 600 14 3/4" 16 (.63) 8,7 (19.18) Impact tool - inline design with fistgrip - ATEX-compliant IM2cXII2GDcIICT6(80°C)X, without 3-step torque adjustment • Safety lever SMS210-1"XEX 6061106A M20 - M36 2 100 3 600 11 1" 16 (.63) 10,5 (23.15) Impact tool - inline design with fistgrip - ATEX IM2cXII2GDcIIBT5(100°C)X, 3-step torque adjustment • Trigger • Maximum power - maximum efficiency - ideal for repetitive production e.g. in the automotive industry • The special robust construction of our impact tools assures a reliable operation in industrial areas with 24/7 operations.

SMS265-1"ZAEX 6061222B M24 - M45 2 650 6 000 13 1" 16 (.63) 15,2 (33.51) Specifications at 90 psi (6,3 bar).

3-step torque adjustment

SMP026-1/2"ZEX

SMS210-1"XEX

SMS265-1"ZAEX

Our impact tools are equipped with a 3-level power limiter, where the first setting is the max. torque, the second setting reduces the torque to 50% and the third setting corresponds to 30% of the max. torque.

Rock drills - for manual drilling equipped with a drill bit (not supplied with the tool), for softand semisolid soil, slate, clay, or other soft rocks located in explosive hazardous environments Model

Part No.

Power output

Speed (no load)

Max. Ø of the core drill

Recommended Ø of core drill

I.D. of air inlet hose

I.D. of Weight water inlet without air hose connection

W (hp) min-1 (rpm) mm (in) mm (in) mm (in) mm (in) kg (lbs) Rock drill, right rotated - ATEX-compliant IM2cXII2GDcIICT6(80°C)X • Safety lever • The machine incorporates a central water-flush features that reduces the dust generation caused by drilling.

DP220-011BXOEX 6061107A 2 200 (2.95) 1 100 42 (1.65) 38-42 (.50-1.65) 19 (.75) 6 (.24) 7,6 (16.75) Rock drill, Wordwide First Turbine Drill for Potentially Explosive Environments - IM2cXII2GDcIICT6(80°C)XIM2c • Right rotated • Safety lever • This is a worldwide innovation where the first of our drills is equipped with a turbine drive. The drill does not require airline lubrication (oilfree!).

• This tool outputs an enormous torque of 45 Nm (400 in.lbs.) at maximum power! The innovative regulator of this drill guarantees an extreme long lifespan. The total weight of the drill is only 8.7 kg (19 lbs.) and therefore the power-to-weight ratio is an advantage!

DPT450-011BXOEX 6061253A 4,5 (6.00) 1 100 42 (1.65) 38-42 (.50-1.65) 19 (.75) 8,7 (19.18)

DP220-011BXOEX

DPT450-011BXOEX

Specifications at 90 psi (6,3 bar).

DEPRAG offers a straight saw of type SS 150-280BX and a chain saw of type SH150-180BX, which conform to the highest requirements for tools used in explosion hazardous environments; more information about our saws can be found on the page 30.

SMP085-1/2"ZAEX

SMP068-3/4"ZEX

Advantages:  ATEX-compliant  can be used in a hazardous

environment (explosion-proof area)

DP220-011BXOEX

SH150-180BX

 enhanced safety features  simple operation  highly durable

31

OTHER AIR TOOL - Files, Air assembly tool, End-of Arm-Tooling for Grinding/Polishing DEPRAG CZ a.s. offers specially adapted tools for your particular application.

Please contact our product specialists if you cannot find a suitable tool.

Air file - for deburring, filing, fine grinding and lapping; in mold making, fixture- and apparatus construction and in foundries; ideal for industrial and production filing applications on steel, aluminum, brass, wood and other materials.

Model

FS905-630BY

Part No.

Stroke speed (no load)

Stroke length

File shank size

I.D. of air inlet hose

Weight without air connection

min-1 (rpm) mm (in) mm (in) mm (in) kg (lbs) Hand files • Fast, efficient filing, sanding and deburring tool - weight reduced by half for comfortable operation over long periods of time.

• A simple and fast exchange of the file • DEPRAG offers as optional accessories 4 various files - rat tail file, triangular taper file, half round file, flat leaf file FS905-630BY 6061238A 6 300 9 (.35) 5 (.20) 6 (.24) 0,5 (1.10) FS404-900BU 6061293A 9 000 4 (.16) 3 (.12) 6 (.24) 0,4 (.88) FS911-370BU 6061407A 3 700 9 (.35) 6,5 (.25) 6 (.24) 1,1 (2.20) Specifications at 90 psi (6,3 bar).

Air assembly tool for mounting of plastic rivets - for mounting of plastic rivets in electrical engineering industry or for mounting of cable trays Model

WP361-045BZA-077/150

Part No.

Diameter/Active length of plastic rivet

Max. work stroke

Pressure force

I.D. of air inlet hose

Weight without air connection

mm (in) mm N mm (in) kg (lbs) Air assembly tool for insertion of plastic rivets Applications: Assembly of cable trays, insertion of plastic rivets in electrical engineering industry, insertion of rivets in production of white goods etc. Air assembly tool is especially well-suited for the use in mass production, where an operator is exposed to sustained, long-lasting and monotonous handling. This air tool is designed to reduce your production efforts by greatly reducing cycle times. The assembly tool is specifically designed for the insertion of specific plastic connection rivets.

WP361-045BZA-077/150 6061261A 7,7/15 (3.03/.59) 45 (1.77) 610 10 (.39) 1,2 (2.65) Specifications at 90 psi (6,3 bar).

Application-extension of this tool can be adjusted depending on the dimensions of plastic rivet.

WP 361-045BZA-077/150

Advantages:  robust  reliable  highly durable  simple operation 32

FS 905-630BY

ACCESSORIES / MAINTENANCE & SERVICE FOR AIR TOOLS Our service offering goes beyond the selection of a suitable tool. The performance and longevity of our tools also depends on using the correct air connections, air distribution throughout the facility and regular maintenance. The operator's comfort while using our tools is influenced by selecting the correct accessories. All this is a part of our product offering and technical consultation by a technical advisor.

Accessories for air tools  Collets, integrated sockets for impact tools, carbide burrs  Inserting tools (chisels) for air hammers  Maintenance units - combination filter / lubricator  Balancers  Polyurethan spiral hoses  Quick connect couplers  Air Plugs  Hose nozzles  Hose connectors  Reducers  Double-threaded connectors  Flow distributors  Lubrication oil  Blow guns (pistolgrip)  Power limeters  Other accessories

Maintenance & service of air tools DEPRAG INDUSTRIAL    

Service and support Highest requirement for quality, precision and longevity Lowest cost for repairs compared to electric tools Shortest deliveries for repaired tools

The air tools offered by DEPRAG INDUSTRIAL have some of the highest reputation on the market due to our never-ending technical developments that are important to keep the cost for maintenance and repair to the lowest possible level.

Our tools fulfill the highest requirements in regards to quality, precision and longevity.

DEPRAG has a full line of service and support offering.

We offer an individual training program, which is targeted to your particular application and the air tools you use.

DEPRAG incorporates its own service center that includes a complete repair facility for all our products. An extensive inventory of spare parts guarantees a fast response capability.

Whether at your or at our facility; we will adapt our service to fit your needs.

33

ADVANTAGES OF INDUSTRIAL AIR TOOLS The main advantage of the airmotor is its high performance density, which is only about 1/5th of the mass or 1/3rd of the size of an electric motor with a comparable performance. Due to this advantage, an air-motor is the preferred drive for power tools.  Power Characteristics The power output performance of the air-motor is virtually constant over broad speed ranges. It can also be operated in a wide field of alternating loads. The power output can be easily adjusted by changing the operating-pressure and the speed is perpetually variable by the reduction of the air volume.  Load Capacity The air-motor can easily be loaded to a full stand-still; it even tolerates a negative turn direction if the load is increased.

The motor always reaches its full power output and there will be no damage to the motor!  Temperature behavior Expanding air cools the motor when the load is increased. Only when idling, a rise in temperature may occur.

The motor is therefore temperature insensitive and overheating through over-load is practically impossible.  Exhaust The noise generated by the exhaust air is reduced by a specialized silencer. Additionally, the exhaust air is directed away from the operator through a coaxial pressure/exhaust-hose.  Vane Motor All vane motors essentially consist of the rotor, which circulates in an eccentrically offset perforation of the rotor cylinder. Because of this eccentrically offset perforation, the vanes form working chambers, the volume of which increase in the turn direction. Because of the expansion of the compressed supply air, the pressure energy is converted into kinetic energy and therefore results into the rotation of the rotor.  Turbine Motor Our turbine motors offer the ideal drive solution for high speed ranges. From turbine design and prototype production up to a series manufacturing, a tailor-made motor solution is available for your individual application.

Structure and function of the DEPRAG Turbine: Conversion of pressure energy to kinetic energy in the jet nozzle. Most of the kinetic energy is transformed within the first rotor disc. The fixed guide wheel alters the air flow. The residual energy is transformed in the second rotor disc. The turbine is a turbo machine, which does not need tangential sealing. Turbine operates with oil-free air, therefore causes absolutely no wear. Turbo machines use pneumatic energy optimally, which reduces the air requirements to 1/3rd when compared with a standard vane motor. The performance-to-weight ratio (kg/kW) is only half as large.

Jet nozzle 1st rotor disc Guide wheel 2 rotor disc nd

34

AIR TOOLS VS ELECTRIC TOOLS - ADVANTAGES OF AIR TOOLS Air tools vs electric tools - advantages air tools  Optimum power-to-weight ratio  Work in polluted environments (air tools are damp- and dust resistant)  Robust - highly durable, suitable for the use under extreme operational conditions  No electric shock risk  High starting torque  No overheating  Overload safe  Compact and light weight  Easy to maintain

AIR TOOLS DEPRAG INDUSTRIAL - APPLICATIONS DEPRAG CZ a.s. offers professional tools for almost any application case.

Applications:  Foundries  Off-shore industry  Automotive industry  Machine building  Steel building  Ship building  Aircraft building  Building industry  Mining, quarries  Sculpture and fabricating  Household goods  Maintenance and assembly departments 35

OPERATING CONDITIONS FOR THE USE OF AIR TOOLS Operating conditions for the use of air tools

Before connecting the air supply line to the machine, clean the air pipe and the air hose by slightly blowing air into the pipe/hose; this will remove any dirt particles. Make sure to wear your safety googles! Verify that all air lines have a sufficient cross-section (as mentioned in technical specifications of our products) and that there are no throttled areas, bends or kinks. If the air supply line is longer than 2 meters, the next larger hose I.D. should be installed, to avoid a loss of power. Our tools should be operated with lubricated air only. Best results are achieved, when machine is lubricated with 1 – 2 drops of oil per 1m3. The air supply to the machine needs to be filtered. The maintenance unit, the valves and the silencers have to be selected according to the air consumption of the machine (mentioned in technical specifications of our products). Install components, which have a measurement that will limit the pressure drop – when measured from the maintenance unit to the machine – to less than 0.5 bar (7.25 PSI). Check flowpressure directly on the machine. The pressure regulator needs to be adjusted to an airflow of (max.) 6.3 bar/90 PSI. A higher pressure leads to increased wear and tear. An air pressure below 6.3 bar reduces the power output and speed of the machine. It is necessary to ensure the quality of the compressed air at the required pressure, as well as the volume required for the respective air tools. When using oilfree air, a performance reduction occurs & maintenance requirements increase!

Connect the machine as follows:  For standard operation, connect to a maintenance unit consisting of filter with water separator, pressur regulator and oiler.  The standard filter efficiency for maintenance units is 25 μm. If a higher air quality is required, please use a filter insert with a higher filter efficiency.

With regard to air quality according to ISO 8573-1 we recommend:

Class Lubricated air Oil-free air

-/4/4 6/3/3

Residual Dust particle size max. concentration μm mg/m³ 25 10 5 *) 5

Residual Water max. concentration pressure dew-point g/m³ °C 6 +3 0,88 -20

Residual Oil content mg/m³ 5 1

*) Filter grade 8 μm is sufficient for DEPRAG machines which are operated oilfree.

 Check regularly that the (measured) speed of the machine is not higher than specified on its tag (or in our technical specifications). Do not exceed the maximum allowable operating speed.  Never remove factory installed guards from tools and ensure they are in good condition and properly adjusted (inspect regularly). Guards need to be correctly aligned to deflect sparks and debris away from the operator.  Check that only abrasive products as specified by the manufacturer are used and are in good condition. Never exceed the maximum allowed radial speed of the abrasive material. The abrasive product must be designed for your tool and it´s application.  Ensure that the abrasive product dimensions are compatible with the machine and that the abrasive product fits the spindle. An unsuitable product can produce excessive debris, dust, vibration and noise. Prior to operating the tool, make sure that the abrasive product is securely clamped.  Verify that the abrasive product is not wobbling or loose prior to starting tool operation. Carefully idle the machine without applying any load.  Always wear impact-resistant safety goggles, hearing protection, safety gloves and personal protective clothing - such as an apron and helmet.  Schedule regular maintenance for your tools & the air supply with all its connections - coordinate your maintenance by considering the level of usage of your tools and the application where your tool is used.

36

RULES OF CONNECTING AIR TOOLS TO AN AIR DISTRIBUTION GRID Rules of connecting air tools to an air distribution grid        

The compressed air entering the tool must be dry and clean Vane motors must be oiled, using a special air lubrication oil (see DEPRAG oil) Tooth- and turbine motors do not use air-line lubrication Tools should be used with maintenance units, consisting of filter, oiler and regulator Correctly choose a maintenance to ensure sufficient air flow The maintenance unit should be visibly installed for easy verification of the oil level and its overall functionability Use an air hose that has the correctly sized interior diameter (ID) Maximum recommended distance of a tool from its maintenance unit is 5 meters (use a hose with a larger ID for longer distances)

We offer a variety of air connection accessories. Our experienced sales staff can help you choose the correct connection to ensure the right performance of your DEPRAG tools. Please contact our product specialists!

37

TYPE KEY - PNEUMATIC TOOLS DEPRAG INDUSTRIAL Type key - grinders / polishers Grinders with Collet GDST 070 - 153 B X F I H L

PB 35 C L - 45 Y K L = Left-rotated H = Heavy duty design I = Double insulated housing F = Frontal exhaust (partial), without exhaust hose X = Safety lever Y = Twist valve V = Remote valve B = Basic design S = Short design V = Slender design W = Extension design; 1(2,3,4)-number of linked extensions Q = Extension spindle without case G = For clamping into a stand, vice or holder Speet x 100 [min-1]; 153 = 15 300 min-1 Power output x 10 [W]; 070 = 700 W T = Turbine S = Straight A = Angle-head design - 90° B = Angle-head design 120° GD = Grinder with collet

K = With collet X = Safety lever Y = Twist valve Radial speed of grinding tip [m/s] L = Left-rotated C = Innovational stage Max. diameter of grinding tip [mm] B = Grinder P = Pneumatic

Grinders with Grinding Wheel G A T Q 818 - 150 B X T A M14

P B U 180 E - 80 X M14 = Thread M14 A = For conical wheels T = Spindle thread 5/8" UNC X = Safety lever B = Basic design C = For cup-wheels Power output x 10 [W]; 150 = 1 500 W Max. diameter of grinding disk x 10 [mm]; 180 mm Max. radial speed - 80 m/s Q = Intelligent tool T = Turbine A = Angle S = Straight G = Grinder

X = Safety lever Max. radial speed - 80 m/s E = Innovational stage Max. diameter of grinding disk x 10 [mm]; 180 mm PBU = Air angle grinder

Belt Sanders GB 030 - 013 B X X = Safety lever B = Basic design C = Coaxial outlet Belt wide [mm] Power x 10 [W]; 030 = 300 W B = Belt G = Grinder

Polishers PA T 070 - 060 B Y I

PL U 180 B - 80 X L I = Double insulated housing Y = Twist valve X = Safety lever Z = Trigger start B = Basic design S = Short design Speed x 100 [min-1]; 060 = 6 000 min-1 Power output x 10 [W]; 070 = 700 W T = Turbine E = Eccentric A = Angle S = Straight P = Polisher

38

L = Left-rotated X = Safety lever Y = Twist valve Z = Trigger start Radial speed [m.s-1] A, B, C, D = Innovational stage, E = Eccentric Max. diameter of grinding / polishing disk [mm] U = Angle S = Straight P = Geared PL = Pneumatic polisher

TYPE KEY - PNEUMATIC TOOLS DEPRAG INDUSTRIAL Type key - drills / tappers / impact tools / saws / hammers / files / metal shears / needle scalers / pliers Drills / Tappers PV 6 A - B H

DS 020 - 060 B X P R F B10 Q EX EX-protection Q = Quick change chuck Drill bit clamping system: B10 - conical chuck B10 3/8“ - thread on chuck 3/8“UNF C - collet MK1 - MORSE taper F = Frontal exhaust (partial) R = Reversible P = Chuck or collet shield X = Safety lever Y = Twist valve Z = Trigger start P = Push to start B = Basic design S = Short design Speed x 100 [min-1]; 060 = 6 000 min-1 Power output x 10 [W]; 020 = 200 W S = Straight P = Pistolgrip D = Drill / tapper

H = Hose B = Basic design Innovational stage A, C, E Max. diameter of drill bit [mm] Pneumatic drill

Impact tools S M P 030 - 1/2“Z A EX EX-protection A = Adjust limiter Z = Trigger start X = Safety lever Size spindle- 1“, 1/2“, ...

Max. torque value x 10 [Nm]; 240 = 2 400 Nm P = Pistogrip S = Straight M = Mechanic S = Wrench

Saws - chain saw, jig saw S H 150 - 180 B X

P P P 35 A X X = Safety lever A = Version Max. length of saw blade x 10 [mm]; 350 mm P = Straight (Jig ) P = Saw P = Pneumatic

X = Safety lever B = Basic design Chain saw: Speed x 100 [min-1]; 180 = 18 000 min-1 Jig saw: Strokes per min. - no load [min-1] Power output x 10 [W]; 150 = 1 500 W H = Chain saw S = Straight (Jig) S = Saw

Hammers

Files

HCD 140 - R14 V

FS 9 05 - 630 B Y B = Basic design V = Low vibrations D =Fist grip P = Pistolgrip Type of shank for tools, R = Round-shaft, HR-round hex.shaft Weight 140 = 140/10 = 14 kg HC = Chipping / Riventing hammer HCD = Riveting hammer HB = Spade hammer HP = Pick hammer HR = Impact hammer HS = Scraper

Y = Twist valve B = Basic design Stroke speed x 10 [min-1]; 630 = 6 300 min-1 Weight 05 = 05/10 = 0,5 kg Stroke length, 9 mm S = Straight F = File

Needle scalers S N 10

Weight 10 = 10/10 = 1,0 kg (1,4 kg) N = Needle S = Scaler

Pliers P0 38 3 X - P 00 - I 00 CL 10

Width of clamp: 6=5,5 mm, 08=7,5 mm, 10=10 mm Clamps: CL = CLIC clamps CO = COBRA clamps FE = Spring clamps R = Hose clamps Inserts-angle: 00 = without angle, 90 = angle 90° I = Insert type Head angle: 00 = without angle Inserts: C = Cutting, S = Squeeze P = Press X = Safety lever Z = Trigger start 3 = Piston number Cylinder diameter [mm]; 38 mm P = Pliers (0 = Basic, 1 = Another version)

Metal shears S 16 - 320 Y

X = Safety lever Y = Twist valve Impacts at full load x 10 [min-1]; 320 = 3 200 min-1 Max. metal thickness up to 400 N/mm2 /10 [mm]; 16 = 1,6 mm S = Shears

39

DEPRAG CZ a.s., T. G. Masaryka 113, 507 81 Lázně Bělohrad - Czech Republic Tel.: +420-493 771 511, Fax: +420-493 771 623, E-mail: sales@deprag.cz, Internet: www.deprag.cz

Specifications subject to change without prior notice

machines unlimited