How to Replace Waterless Urinal Cartridge Kit...

How to Replace Waterless Urinal Cartridge Kit Source: http://xionlab.com/how-to-replace-waterless-urinal-cartridge-kit/ We recommend is the EZ Trap Waterless Urinal cartridge. It fits perfectly on Sloan, Falcon, and Bobrick waterless urinals, and it last 3 to 4 times longer than regular manufacturer cartridges. The EZ Trap also cuts maintenance cost dramatically because you can clean your urinal with any cleaner, and it does not need special, and costly sealants for urine odor control. CLICK HERE for information on the EZ Trap Waterless Urinal Cartridge.

Urinal cartridge is an important part of the urinal. It must be checked and replaced at regular interval. The urinal cartridge replacement task is easy. It does not require contacting an experienced plumber. Here are some steps that outline how to replace waterless urinal cartridge kit.

Step 1. The first step of how to replace waterless urinal cartridge kit is to put in the key that opens the cartridge.

Step 2. Next, you should lift the cartridge. Tilt the cartridge a little to drain liquid such as urine, sealant, and water. This is the second step of how to replace waterless urinal cartridge kit.

Step 3. The third step of how to replace waterless urinal cartridge kit is to tilt the cartridge to dispose the cartridge by placing inside a bag. The bag should be sealed properly and then thrown in the bin.

Step 4. Next, you should scrub the urinal using a soft brush. Consider scrubbing deep inside the pipe using a nylon brush.

Step 5. After you have carefully scrubbed the unit, you should next consider flushing the urinals with 20 litters of soapy water. This is the fifth step of how to replace waterless urinal cartridge kit.

Step 6. Afterward, you should clean the rim of the urinal bowel with a soft cloth or a sponge.

Step 7. After you have cleaned the rim, you should insert the new cartridge inside the unit. Once the cartridge is secure in place, you should turn the key to the right.

Step 8. The penultimate step of how to replace waterless urinal cartridge kit is to fill the cartridge with about 1 quart of water. Continue filling until no bubbles are seen.

Step 9. The ninth step of how to replace waterless urinal cartridge kit involves adding the sealant.

When adding sealant, you should allow time to drain it to the bottom.

Step 10. Lastly, you should spray a disinfectant and wipe it clean using a sponge. While using, the urinal harbor less bacteria as compared to flush urinals, using the disinfectant is nonetheless important as traces of the pathogens may be present in the bowel.