How to Change Waterless Urinal Cartridge...

How to Change Waterless Urinal Cartridge Source: http://xionlab.com/how-to-change-waterless-urinal-cartridge/ Our recommended waterless urinal cartridge is the EZ Trap Waterless Urinal Cartridge. It fits perfectly on Sloan, Falcon, and Bobrick waterless urinals, and it last 3 to 4 times longer than regular manufacturer cartridges. The EZ Trap also cuts maintenance cost dramatically because you can clean your urinal with any cleaner, and it does not need special, and costly sealants for urine odor control.CLICK HEREfor information on the EZ Trap Waterless Urinal Cartridge.

The cartridge is the main component of the waterless urinal. It contains the sealant that prevents overflow of the liquid waste. Here are some steps that highlight how to change waterless urinal cartridge.

Step 1.The first step of how to change waterless urinal cartridge is to insert key to open the cartridge. You need to turn the key to the left to open the cartridge.

Step 2.The next step of how to change waterless urinal cartridge is to lift the cartridge.

Step 3.You should tilt the cartridge to drain the liquids including water, urine, and sealant. This is the third step of how to change waterless urinal cartridge.

Step 4.The fourth step of step of how to change waterless urinal cartridge is to place the old cartridge in a bag. Seal the bag and then dispose in the dustbin.

Step 5.Scrub the inside the urinal using a soft bristle brush. You need to scrub deep inside of the tail piping using a 1.5-inch nylon brush.

Step 6.After carefully scrubbing the unit, you should next flush the urinals with soapy water. You need to use about 20 liters or 5 gallons of water to flush the toilet. This is the sixth step of how to change waterless urinal cartridge.

Step 7.Afterward, you should wipe the inner stainless steel rim using a soft cloth.

Step 8.Once you are done wiping the rim, you should again insert a new cartridge inside the housing. And then turn the key to the secure it in place.

Step 9.Now you must fill the cartridge with about 1 liter (1 quart) of clean water. You should continue filling until there are no air bubbles.

Step 10.Now, you should add a blue sealant. Make sure to allow enough time to allow it to drain into the cartridge. The last step of how to change waterless urinal cartridge is to spray cleaner and then wipe it clean using a soft cloth.

The above ten steps detail how to change waterless urinal cartridge. The cartridge can be replaced without any professional help. However, it's important to follow all the steps properly regarding how to change waterless urinal cartridge.