zygoma ZYGOMA IMPLANT SYSTEM
Zygoma implant surgery
Zygoma implants are a valid alternative for patients suffering from serious forms of jaw bone atrophy that can be implemented both with the classic protocols with deferred loading and with immediate loading. By using zygoma implants, the more complex procedures of bone grafting and maxillary sinus lift can be avoided, contributing to a shorter and more comfortable treatment.
There are many benefits to using zygoma implants for rehabilitation, in clinically suitable cases with severe bone atrophy in the maxilla:
ꞏ Single surgery
ꞏ No mobile prostheses
ꞏ Reduced healing times compared to a possible rehabilitation with bone graft
ꞏ Total recovery of chewing
ꞏ Possibility of having fixed teeth a few hours after surgery (in clinically suitable cases)
The surgical techniques are:
CLASSIC TECHNIQUE
ATROPHIC POSTERIOR MANDIBLE , where the zygoma implant is placed on each side of the jaw, in combination with 2-4 conventional implants in the anterior area.
ZYGOMA QUAD TECHNIQUE
TOTALLY ATROPHIC MANDIBLE , positioning conventional implants is not possible, therefore this technique involves the insertion of 2 zygoma implants per quadrant, connected to each other in a single session.
Innovation, know-how, quality and patented design
Know-how Experience
Research and development, constant updating of skills to assess and validate innovative clinical concepts based on scientific evidence that improve and simplify the professional's clinical operations. Expertise, awareness and attention to detail are essential for the success of each product.
At Advan, experience is combined with meticulous attention to material developments, a passion for innovation, the most up-to-date manufacturing technologies and clinical trends in the sector, supported by the scientific input of our key opinion leaders and by clinical trials in collaboration with the most important universities.
Implant features
Internal Hex 2.43 mm
Smooth body to prevent bacterial adhesion
Double-lead thread for excellent primary stability in the zygomatic bone. Patented design derived from Advan experience in dental implant surgery
The apical portion of the implant (13.5 mm) features the OsseoGRIP surface treatment
Atraumatic convex apex
Implant features
The implant is packaged without a preassembled mounting device. The standard cover screw is NOT included in the package. The implant is available in lengths from 30 mm to 60 mm and is made of Ti gr.23.
ZA4030 LTOT 30,0 mm
ZA4032 LTOT 32,5 mm
ZA4035 LTOT 35,0 mm
ZA4037 LTOT 37,5 mm
ZA4040 LTOT 40,0 mm
ZA4042 LTOT 42,5 mm
ZA4045 LTOT 45,0 mm
ZA4047 LTOT 47,5 mm
ZA4050 LTOT 50,0 mm
ZA4052 LTOT 52,5 mm
ZA4055 LTOT 55,0 mm
ZA4057 LTOT 57,5 mm
ZA4060 LTOT 60,0 mm
Zygoma surgical kit
The surgical kit consists of a single box containing all the surgical and prosthetic instruments required for osteotomy, positioning the implant and its prosthesis. Includes surgical box made of Radel (non-toxic, autoclavable, metal-free).
ZKC10 - Zygoma surgical kit
07FPZ10 Ø 2.5mm Round bur
07FDZ04 Short tip diamond bur
07FDZ20 Long tip diamond bur
20FZC30 Step bur A Ø 2.0 - Ø 2.4 - Ø 3.0 mm L 75 mm
20FZL30 Step bur A Ø 2.0 - Ø 2.4 - Ø 3.0 mm L 95 mm
28FZC40 Step bur B Ø 2.8 - Ø 3.2 mm L 75 mm
28FZL40 Step bur B Ø 2.8 - Ø 3.2 mm L 95 mm
32FZC40 Step bur C Ø 2.8 - Ø 3.2 mm L 75 mm
32FZL40 Step bur C Ø 2.8 - Ø 3.2 mm L 95 mm
07ZDD01 Zygoma surgical driver
07NDD02 Long implant mechanical driver
07-EG10 Medium mechanical prosthetic driver
02EGM10 Manual prosthetic driver
02-CT20 10-70 Ncm Torque ratchet
01-MP45 45° depth probe
Burs
07FPZ10
ROUND BUR
∅ = 2.5mm
LTOT = 70.0mm
07FDZ04
SHORT TIP
DIAMOND BUR
∅ = 4.2mm
LMAX = 4.0mm
07FDZ20
LONG TIP
DIAMOND BUR
∅ = 4.2mm LMAX = 20.0mm
BURS FOR INITIAL PREPARATION
The bur for initial preparation allows you to mark the point where to start the preparation (Marking Bur) and to easily drill the cortical bone. Diamond burs allow you to prepare the drilling direction of the zygomatic bone by creating an orientation groove in the maxillary bone.
20FZC30
STEP BUR A
∅ 2.0 - ∅ 2.4 - ∅ 3.0mm
LTOT = 75.0mm
20FZL30
STEP BUR A
∅ 2.0 - ∅ 2.4 - ∅ 3.0mm
LTOT = 95.0mm
28FZC40
STEP BUR B
∅ 2.8 - ∅ 3.2mm LTOT = 75.0mm
28FZL40
STEP BUR B ∅ 2.8 - ∅ 3.2mm LTOT = 95.0mm
32FZC40
STEP BUR C
∅ 2.8 - ∅ 3.2mm LTOT = 75.0mm
32FZL40
STEP BUR C
∅ 2.8 - ∅ 3.2mm
LTOT = 95.0mm
ZYGOMA STEP BURS
ZYGOMA burs have a laser marked letter to easily recognise the diameter. Each diameter is available in two different lengths. Depth references are milled and laser marked. External irrigation burs. Diamond Like Carbon surface treatment.
Driver
02EGM05
SHORT MANUAL PROSTHETIC DRIVER
L = 3.0 mm
02EGM10 MANUAL PROSTHETIC DRIVER
L = 10.0 mm
07-EG05
SHORT MECHANICAL PROSTHETIC DRIVER
L = 5.0 mm
07-EG10
MEDIUM MECHANICAL PROSTHETIC DRIVER
L = 10.0 mm
07-EG15 LONG MECHANICAL PROSTHETIC DRIVER L = 15.0 mm
PROSTHETIC DRIVER
The ZYGOMA implant system has only one type of prosthetic driver (1.2 mm hexagon) with which to screw and unscrew the prosthetic components. The prosthetic drivers feature the W&H hexagonal coupling system.
IMPLANT DRIVERS
The implant driver is equipped with a retention system to hook the implant, take it, transport it and finalise the positioning. IT IS equipped with the W&H hexagonal coupling system and with a reference that allows you to check the radial position of the implant's hexagonal index (which indicates the position of the hexagon apex).
07ZDD01 ZYGOMA SURGICAL DRIVER LMAX = 70.0mm
07NDD02 LONG IMPLANT MECHANICAL DRIVER LMAX = 11.0mm
Accessories
01-MP45 45° DEPTH PROBE
02-CT20 TORQUE RATCHET 10-70 Ncm
Warning Read the instructions before use
ACCESSORIES
The ZYGOMA system features accessories to facilitate specific surgical or prosthetic operations. The Depth Probe is graduated and has a gripping tooth to verify the position of the basal bone. The dynamometric ratchet has an adjustable control of the screwing torque (10-70 Ncm) and can be used both for the surgical phase and for the prosthetic phase. The surgical kit can be completed with a tray useful for managing autologous bone or for bone substitutes.
BOWL BONE TRAY
Zygoma MUA
The MUA system provides a solution for screw-retained restorations even on implants that are complicated to rehabilitate (for example on inclined multiple implants). The MUA system includes a complete line of products designed for zygoma implant rehabilitation. Available in different heights, they connect to a wide range of complementary products. Sterile-packaged with transport carrier suitable for easy control of the prosthetic emergence. Use the prosthetic driver to tighten the retention screw. Made of Ti gr.23.
05ZNA42
MUA 45° H = 2.0 mm
05ZNA43
MUA 45° H = 3.0 mm
05ZNA44
MUA 45° H = 4.0 mm
05ZNA62
MUA 60° H = 2.0 mm
01NFM18 TYPE 3 SCREW 3 pieces
30 Ncm
Use the prosthetic driver. Tightening torque 30 Ncm. TYPE 3 tightening screw included. Angled with respect to the apex of the hexagon. Carrier included.
