SMB Genuine Options

Sidewinder X-TX SE

Combination Trunk Bag

Increase your luggage space with options to spare and plenty of compartments to keep all items well organized.

• Tunnel bag with saddlebags combination

• Multi-compartment design

• Durable, weather resistant nylon

• Will not work in combination with the optional Two-Up Seat

Saddle Bags

When you need to bring along extra gear for your ride, these saddle bags are essential.

• Large bags, one on each side of the seat/ tunnel

• Durable, weather-resistant 1000-denier nylon

• 800-denier nylon accent material

• Mounted to the tunnel and under the seat

• Set of two

Medium Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 18.8L (.665 cf ) capacity

Part numbers

SMA-8LR63-00-BK Black

Conflicting parts

SMA-8JP2P-ST-01 Two-up Seat

Part numbers

SMA-8LR73-00-BK Black

Part numbers

SMA-8MB63-00-BK Black

Crossover

Sidewinder X-TX SE

Large Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 21.8L (.77 cf ) capacity

Extra Large Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 22.9L (. 81 cf ) capacity

Handlebar Bag

Add some convenient storage to your snowmobile with this multi-compartment bag. Mounts using both the handlebar and handlebar risers.

• Made of durable, weather resistant nylon.

Part numbers

SMA-8MB64-00-BK Black

Handlebar Bag

Add some convenient storage to your snowmobile with this multi-compartment handlebar bag.

• Durable, weather-resistant nylon

• Accent material in 800-denier nylon

• Mounted by using both the handlebar and handlebar risers

Part numbers

SMA-8MB65-00-BK Black

Part numbers

SMA-8LY43-00-00 Black

Part numbers

SMA-8JP43-01-00 Black

Sidewinder X-TX SE Crossover

M-TX Tunnel gear bag

Simple water-resistant moulded top tunnel pack perfect for the mountains.

• Mounts with quick attach straps to the rear grab bar

Part numbers

SMA-8KG63-00-00 Black

Billet Suspension Adjustment Blocks

The suspension block helps you achieve the ride quality that you want by allowing custom tuning of your rear suspension to 4 levels of spring preload.

• Made from solid billet aluminum.

• Anodized for long life.

• Sold in pairs

Woody’s® 6” Ace Runner Set

This carbide runner is the tallest in the industry and has a narrow, rectangular profile for aggressive turning capabilities.

Its 60° turning carbide (available in 6” & 8”) has been strategically placed to protect the runner and reduce darting by carving through existing grooves. Works great on Crossovers and in deep snow.

• Sold in pairs

• 6” of 60° turning carbide on a tall, square host bar

Woody’s® 8” Ace Runner Set for the Sidewinder

This carbide runner is the tallest in the industry and has a narrow, rectangular profile for aggressive turning capabilities. Its 60° turning carbide (available in 6” & 8”) has been strategically placed to protect the runner and reduce darting by carving through existing grooves. Works great on Crossovers and in deep snow.

• Sold in pairs

• 8” of 60° turning carbide on a tall, square host bar

Part numbers

SMA-8JP39-BL-10 Black

Part numbers

SMA-AY688-00-00 Black

Part numbers

SMA-AY888-00-00 Black

Crossover

Sidewinder X-TX SE

Ice Scratchers

Helps prevent slide runner wear when on ice and hard pack snow.

• Rests on top of the slide rail when not in use or when backing up

• Not meant to use in reverse

• Sold in pairs

Part numbers

SMA-8JP38-00-KT Black

DuPont Slides 174”

Perfect for everyday riding on the trails or in the mountains. Reduces the friction and protects the aluminum rails from track wear.

• DuPont Vespel® material inserts

• Space-age polymer / composite material

• 15T scale Rockwell hardness of about 80 (UHMW slide runner hardness rating is about R64)

• Capable of withstanding extreme friction and heat environments

• Pieces are placed at a 30-degree angle across the entire slider for constant contact and even wear

• Made using compression moulding process

• Partially made with current UHMW plastic slide runner material

• Sold Individually

Rear Grab Bar & Hitch Kit

Strong, secure steel grab bar with pivotstyle hitch.

• Required for mounting the optional Tunnel Rack and optional Two-Up Seat

• Includes all necessary hardware

• 4 or 8 mounting pockets

Part numbers

SMA-DPSSV-MT-00 Black

Part numbers

SMA-8MF41-00-00 Black

Optional parts

SMA-8JP2P-ST-01 Two-up Seat

Scorchers™ Ice Scratchers

The kit lubricates the hyfax and assists cooling when riding on hard-packed trails or frozen lakes. The scratchers are constructed of eat-treated, heavy-duty steel springs. It also includes anodized CNC machined aircraft aluminum washers to ensure durability and high performance. Can be used with or without idler wheels.

• Stows away to a nested position when not in use

• Drilling may be required

Part numbers

SMA-ICESC-BK-00 Black

Sidewinder X-TX SE Crossover

TRIC™ Ice Scratchers

The kit provides additional snow spray in hard-packed icy conditions to help reduce rear suspension hyfax wear and engine overheating. It creates a steady stream of ice crystals to provide both lubrication for the rear skid frame and additional cooling to the heat exchangers on liquid-cooled machines. Features stainless steel cables and adapters which can be rotated to allow for left or right applications. Also includes stainless steel hardware with universal mounting brackets.

• Includes 1/4” threaded replaceable carbide stud

• Allows operation of the reverse gear

• Sold in pairs

TRIC™ Ice Scratchers - Replacement Studs

The kit contains replacement studs for the TRIC™ Ice Scratchers.

• Uses common 1/4” thread

Part numbers

SMA-ICESC-02-ST Blue

Mounting kit for Windshield Mirrors (Sidewinder and SRViper)

Mounting kit for Windshield Mirrors (Sidewinder and SRViper).Only compatible with SMA-8LR96-21-SM & SMA-8LR9630-SM.

• Mounts to outside of windshield

Part numbers

SMA-ICESC-CB-AP Aluminium

Part numbers

SMA-8LJMR-AD-KT Black

Optional parts

SMA-8LR96-21-SM Medium Sport Windshield

SMA-8LR96-30-SM Medium Windshield

Aluminium Front Grab Bar

Offers a solid grip and bold styling.

• Constructed of ultra-lightweight aluminium tubing

• 1,6kg weight

Part numbers

SMA-8MT55-00-BK Black

Crossover Sidewinder X-TX SE

Pro Skid Plate

Race-inspired design offers lightweight protection from stumps, rocks, ice chunks, and other trail debris that can damage the bottom of the snowmobile chassis.

• Durable UHMW construction

• Includes all mounting hardware

Part numbers

SMA-8LR34-00-BK Black

Deluxe Heated Shield Outlet

Add a heated shield outlet to your snowmobile

• Dash mounted

• Equipped with cover to protect plug from ice and snow

• Simple installation with factory accessory pig-tail

Console Knee Pads

Add comfort and extra grip for your knees while protecting your machine’s bodywork from scratching.

• Heavy-duty durable nylon material

• Mounts to snowmobile securely

• Sold in pairs

Part numbers

SMA-8LR10-00-00 Black

Part numbers

SMA-8LR24-00-BK Black

Snowmobile Handguards Mounts

Made of sturdy plastic, this mounting kit is necessary for the installation of the snowmobile handguards: SMA-8LYHG-00BK (sold separately)

• Sold in pairs

Part numbers

SMA-8LYMT-00-00 Black

Required parts

SMA-8LYHG-00-BK Snowmobile Handguards

Sidewinder X-TX SE Crossover

Snowmobile Handguards

Stylised protection for your hands from the chilling winds

• Sold in pairs

• Requires Mounting Hardware: Part #SMA8LYMT-00-00 (sold separately)

Part numbers

SMA-8LYHG-00-BK Black

Required parts

SMA-8LYMT-00-00 Snowmobile Handguards Mounts

Rear Trail Skid Plate

Provides full coverage protection for the clutch, exhaust and chain case components.

• 1/4” thick high molecular weight polyethylene

Part numbers

SMA-8LR34-RR-BK Black

Windshield Bag

Offers convenient, easy-access storage for all essentials you need to take out on the trails.

• Made of durable, weather resistant nylon with colored accents material

• Larger bag, perfect for storage of phones, keys, wallet, camera, small tools, etc.

• Uses windshield mounting points for installation

Spot Light Kit

Enhances sight in low-light conditions with LED technology.

• Powerful spot light

• Easy installation with included hardware

• Easy installation using strong ThreeBond® adhesive for a permanent mount

• Powerful LED spot light with 18 LEDs

• Easy installation

• Ram mount with U bolt for rail mount included

• 12 volt output socket included

• Rubber ball absorbs shock and vibration

• Easily detachable from ram mount

• Weather-resistant rubber body shield

• On/off switch on the light

• Length of power cord is 125 cm-175 cm

• 30 degrees beam

• Frosted lens

• 9 watts

• 1900 lumens

• 4500K colour temp

Part numbers

SMA-8LR21-00-BK Black

Part numbers

ABA-2HR35-10-00 Black

Crossover

Sidewinder X-TX SE

Engine Stop Tether

Stay safe and prevent unfortunate events. This kit stops the engine In the event of getting separated from your snowmobile.

• End of the tether attaches to a jacket’s D-ring

Part numbers

SMA-8MS81-00-00 Red

Two-up Seat

Convert your snowmobile to allow for carrying a passenger.

• Includes passenger seat with adjustable handholds and quick-release footrests

• Fits the optional Heated Grips (requires Heated Grip Switch Kit)

• Can be equipped with rear rack or bag

• Requires Rear Grab Bar & Hitch Kit for installation (sold separately)

• Will not work in conjunction with Combination Trunk Bag

Windshield Pack

Perfect for mountain and backcountry riders, this pack does double duty as both a sleek windshield and convenient storage for your unit.

• Semi-rigid construction

• Water-resistant

• Large zipper pull tabs easy to open and close with gloves on

Part numbers

SMA-8JP2P-ST-01 Black

Conflicting parts

SMA-8LR63-00-BK Combination Trunk Bag

Part numbers

SMA-8MS21-00-BK Black

Low Sport Windshield – Blue Improved protection compared with stock windshield.

• Yamaha Racing Blue

• 37.5 cm tall

Part numbers

SMA-8MY96-11-BL Blue

Sidewinder X-TX SE Crossover

Tall windshield

Higher screen to replace standard screen, providing enhanced wind protection especially for those cold days on the trail.

• Adding a custom look to the front profile

• Clear coloured, polycarbonate screen

• Screen height is 19,25inch

Part numbers

8MH-K7210-00-00 Transparent

Low Sport Windshield

Provide’s improved protection over stock. Adds a splash of colour with racing inspired graphics.

• Height is 14.75”

Part numbers

SMA-8JP96-11-BL Blue

SMA-8JP96-11-RD Red

SMA-8JP96-11-BK Black

Medium Sport Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail.

• Customize the look of your snowmobile

• Made of smoked polycarbonate

• Pre-marked for the optional mirrors

• 16.5” in size

Low Windshield

Aerodynamic, low profile windscreen complements the aggressive profile of the snowmobile’s front end.

• Made of smoked polycarbonate

• 10.25” in size

Part numbers

SMA-8LR96-21-SM Smoke

Part numbers

SMA-8LR96-10-SM Smoke

Crossover

Sidewinder X-TX SE

Medium Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail..

• Made of clear polycarbonate

• Customize the look of your snowmobile

• 18.5” in size

• Pre-marked for the optional mirrors

Tall Smoked Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail.

• Customize the look of your snowmobile

• Made of smoked polycarbonate

• 19.25” in size

Part numbers

SMA-8LR96-30-SM Smoke

Performance Grips

Slim and comfortable grip design offers better shock absorption.

• Sold in pairs

• Thinner material allows for more effective heat transfer from hand warmer elements

Part numbers

SMA-8LR96-20-SM Smoke

Super Sport Caddy Set Caddy Set to move around easily your snowmobile.

• Constructed of lightweight, reinforced, multi-ribbed, injection-molded plastic

• Features twin wheel casters for greater stability

• Equipped with non-slip Hydro Turf® inserts

Part numbers

SMA-8JP61-00-BK Black

Part numbers

SMA-CADDY-SC-BL Blue

Sidewinder X-TX SE Crossover

Metric Tool Kit

Comprehensive tool set that prepares you for just about anything the road will throw at you.

• Includes ring and open end combination spanners 8, 10, 12 & 14, an adjustable spanner, Vice Grips, 4 way Phillips and flat screwdrivers, sparkplug spanner and gap guage

• Includes also a roll of black electrical tape, tyre pressure gauge, cable ties, wire, rag and #3, 4, 5 & 6 Allen keys

• Comes in a compact roll-up pouch

• Can easily be stowed away in your saddlebag, side case, top case, etc.

Yamaha Cam Buckle Tie-downs

Strong and durable straps to tie your Yamaha or any other big object down tightly when transporting it in a van or trailer.

• Ease of operation; simple tensioning and one finger release

• Built-in soft hook on the fixed end for looping around handlebars, frame tubes, triple-tree clamps and other structural parts

• Zinc cam buckle is made with a pressure plate to reduce webbing abrasion

• Features the Yamaha logo at intervals

• Assembly strength: 540kg (1,200lb)

• Working load limit: 180kg (400lb)

• Sold per set of two

Snowmobile High-Performance Suspension Grease.

The best snowmobile grease for usage on advanced suspension systems, when needing to react quickly to rough trail conditions.

• Provides extensive protection and wear resistance

• Low temperature protection down to -65°F and yet protection up to 250°F

• Product should be used where service manual indicates ESSO Beacon 325 or Aeroshell Grease

Part numbers

ABA-METRC-00-00 Black

Part numbers

ACC-0SS58-40-28 Blue

Part numbers

ACC-SMBGR-SE-14 Black

Crossover

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With EU-plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety: spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Part numbers

YME-YEC09-EU-20 Black

Part numbers

YME-YEC01-EU-00 Black

Sidewinder X-TX SE Crossover

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With UK plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety; spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers to fit our range of motorcycles, scooters, ATV, SMB and other products

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Disclaimer

Applicable to UK markets only

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Custom Storage Cover

Protects your unit from the elements during trailering or storage.

• Cotton canvas is naturally very soft on the finish of the unit

• An expandable windshield panel will accommodate the taller accessory windshields

• Military grade, water and mildew resistant material

Part numbers

YME-YEC09-UK-00 Black

Part numbers

YME-YEC01-UK-00 Black

Part numbers

SMA-8MR29-00-00 Black

Woody’s® Trail Blazer IV™ Runner Set

These runners have six inches of 60° turning carbide. They are great choice if you are looking for overall improvement in safety and handling, or to replace your factory runner.

• Sold in pairs

• 6” of 60º carbide on a ½” diameter host bar

• Use with a studded or un-studded track

Part numbers

SMA-TYV48-80-00 Black

Sidewinder M-TX LE 153

Combination Trunk Bag

Increase your luggage space with options to spare and plenty of compartments to keep all items well organized.

• Tunnel bag with saddlebags combination

• Multi-compartment design

• Durable, weather resistant nylon

• Will not work in combination with the optional Two-Up Seat

Expandable Rack Pack

Perfect for when you need to bring that extra gear on your ride.

• Large capacity storage

• Quick-attach straps

• Fits in the Tunnel Rack, sold separately

Part numbers

SMA-8LR63-00-BK Black

Part numbers

SMA-8JY63-00-00 Black

Saddle Bags

When you need to bring along extra gear for your ride, these saddle bags are essential.

• Large bags, one on each side of the seat/ tunnel

• Durable, weather-resistant 1000-denier nylon

• 800-denier nylon accent material

• Mounted to the tunnel and under the seat

• Set of two

Part numbers

SMA-8LR73-00-BK Black

Medium Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 18.8L (.665 cf ) capacity

Large Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 21.8L (.77 cf ) capacity

Extra Large Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 22.9L (. 81 cf ) capacity

Handlebar Bag

Add some convenient storage to your snowmobile with this multi-compartment bag. Mounts using both the handlebar and handlebar risers.

• Made of durable, weather resistant nylon.

Part numbers

SMA-8MB63-00-BK Black

Part numbers

SMA-8MB64-00-BK Black

Part numbers

SMA-8MB65-00-BK Black

Part numbers

SMA-8LY43-00-00 Black

Sidewinder M-TX LE 153 Mountain

Handlebar Bag

Add some convenient storage to your snowmobile with this multi-compartment handlebar bag.

• Durable, weather-resistant nylon

• Accent material in 800-denier nylon

• Mounted by using both the handlebar and handlebar risers

Deluxe Tunnel Bag

Pack a snack and extra essentials for that long or short ride.

• Semi-rigid bag

• Easily removable

Part numbers

SMA-8JP43-01-00 Black

M-TX Tunnel gear bag

Simple water-resistant moulded top tunnel pack perfect for the mountains.

• Mounts with quick attach straps to the rear grab bar

Part numbers

SMA-8JX63-00-00 Black

Part numbers

SMA-8KG63-00-00 Black

Billet Suspension Adjustment Blocks

The suspension block helps you achieve the ride quality that you want by allowing custom tuning of your rear suspension to 4 levels of spring preload.

• Made from solid billet aluminum.

• Anodized for long life.

• Sold in pairs

Part numbers

SMA-8JP39-BL-10 Black

Woody’s® Carbide

Wear Bar Run

Part numbers

ners - Trailblazer Series

The Woody’s® Carbide Wear Bar Runners

- Trailblazer Series are designed for aggressive trail riders.

• Sold in pairs

• Carbide wear pads are a full 1½” long

• 6” of 60º carbide on a ½” diameter host bar

• Full length hard-weld between all three carbide inserts

Woody’s® 6” Ace Runner Set

This carbide runner is the tallest in the industry and has a narrow, rectangular profile for aggressive turning capabilities. Its 60° turning carbide (available in 6” & 8”) has been strategically placed to protect the runner and reduce darting by carving through existing grooves. Works great on Crossovers and in deep snow.

• Sold in pairs

• 6” of 60° turning carbide on a tall, square host bar

Woody’s® 8” Ace Runner Set for the Sidewinder

This carbide runner is the tallest in the industry and has a narrow, rectangular profile for aggressive turning capabilities. Its 60° turning carbide (available in 6” & 8”) has been strategically placed to protect the runner and reduce darting by carving through existing grooves. Works great on Crossovers and in deep snow.

• Sold in pairs

• 8” of 60° turning carbide on a tall, square host bar

Rear Fourth Wheel Kit

Outside idler wheels help keep track in proper alignment and spreads load evenly across the entire track.

• Wheels

• Spacer blocks

• All necessary hardware

SMA-TYV46-58-00 Black

Part numbers

SMA-AY688-00-00 Black

Part numbers

SMA-AY888-00-00 Black

Part numbers

SMA-8JY47-00-BK Black

Sidewinder M-TX LE 153 Mountain

Ice Scratchers

Helps prevent slide runner wear when on ice and hard pack snow.

• Rests on top of the slide rail when not in use or when backing up

• Not meant to use in reverse

• Sold in pairs

Part numbers

SMA-8JP38-00-KT Black

Windshield Mirror Kit

Accentuates the sporty styling of your snowmobile, while keeping aware of your surroundings.

• Mounted to outside of windshield

• Can be combined with the optional Medium Sport Windshield and optional Medium Windshield

Part numbers

SMA-8LJ26-00-00 Black

Required parts

SMA-8LJMR-AD-KT Mounting kit for Windshield Mirrors (Sidewinder and SRViper)

SMA-8LR96-21-SM Medium Sport Windshield

SMA-8LR96-30-SM Medium Windshield

DuPont Slides 174”

Perfect for everyday riding on the trails or in the mountains. Reduces the friction and protects the aluminum rails from track wear.

• DuPont Vespel® material inserts

• Space-age polymer / composite material

• 15T scale Rockwell hardness of about 80 (UHMW slide runner hardness rating is about R64)

• Capable of withstanding extreme friction and heat environments

• Pieces are placed at a 30-degree angle across the entire slider for constant contact and even wear

• Made using compression moulding process

• Partially made with current UHMW plastic slide runner material

• Sold Individually

Console Knee Pads

Add comfort and extra grip for your knees.

• Mounting hardware included

Part numbers

SMA-DPSSV-MT-00 Black

Part numbers

SMA-8JP24-00-WH Black

Scorchers™ Ice Scratchers

The kit lubricates the hyfax and assists cooling when riding on hard-packed trails or frozen lakes. The scratchers are constructed of eat-treated, heavy-duty steel springs. It also includes anodized CNC machined aircraft aluminum washers to ensure durability and high performance. Can be used with or without idler wheels.

• Stows away to a nested position when not in use

• Drilling may be required

TRIC™ Ice Scratchers

The kit provides additional snow spray in hard-packed icy conditions to help reduce rear suspension hyfax wear and engine overheating. It creates a steady stream of ice crystals to provide both lubrication for the rear skid frame and additional cooling to the heat exchangers on liquid-cooled machines. Features stainless steel cables and adapters which can be rotated to allow for left or right applications. Also includes stainless steel hardware with universal mounting brackets.

• Includes 1/4” threaded replaceable carbide stud

• Allows operation of the reverse gear

• Sold in pairs

TRIC™ Ice Scratchers - Replacement Studs

The kit contains replacement studs for the TRIC™ Ice Scratchers.

• Uses common 1/4” thread

Part numbers

SMA-ICESC-BK-00 Black

Part numbers

SMA-ICESC-02-ST Blue

Mounting kit for Windshield Mirrors (Sidewinder and SRViper)

Mounting kit for Windshield Mirrors (Sidewinder and SRViper).Only compatible with SMA-8LR96-21-SM & SMA-8LR9630-SM.

• Mounts to outside of windshield

Part numbers

SMA-ICESC-CB-AP Aluminium

Part numbers

SMA-8LJMR-AD-KT Black

Optional parts

SMA-8LR96-21-SM Medium Sport Windshield

SMA-8LR96-30-SM Medium Windshield

Sidewinder M-TX LE 153 Mountain

Aluminium Front Grab Bar

Offers a solid grip and bold styling.

• Constructed of ultra-lightweight aluminium tubing

• 1,6kg weight

Part numbers

SMA-8MT55-00-BK Black

Conflicting parts

SMA-8KC34-00-BK Floatation skid plate

Front Skid Plate

Improves approach angle and protects the nose cone from damage by stumps, rocks, ice chunks and other debris.

• Can be combined with the optional Rear Skid Plate

• Will not work in conbination with Sport Front Grab Bar

Part numbers

SMA-8JP34-FR-BK Black

Pro Skid Plate

Race-inspired design offers lightweight protection from stumps, rocks, ice chunks, and other trail debris that can damage the bottom of the snowmobile chassis.

• Durable UHMW construction

• Includes all mounting hardware

Part numbers

SMA-8LR34-00-BK Black

Rear M-TX Skid Plate

The skid plate gives full coverage protection for clutch, exhaust and chain case components.

• 1/4” thick high molecular weight polyethylene

Part numbers

SMA-8MP34-00-BK Black

Floatation skid plate

Adds the maximum amount of protection and additional flotation, helping the snowmobile float through the powder.

• Does not fit up with optional accessory front bumpers

• Durable UHMW construction

• Incompatible with optional accessory front bumpers

• Mounting kit included

Rail Brace Kit

Designed with the hard-core riders in mind, these aluminium braces add strength to the stock rails.

• Only 3,4 [kg] per kit

• Easy, bolt-on installation

Part numbers

SMA-8KC34-00-BK Black

Conflicting parts

SMA-8MT55-00-BK Aluminium Front Grab Bar

Part numbers

SMA-8MS60-BK-00 Black

Deluxe Heated Shield Outlet

Add a heated shield outlet to your snowmobile

• Dash mounted

• Equipped with cover to protect plug from ice and snow

• Simple installation with factory accessory pig-tail

Console Knee Pads

Add comfort and extra grip for your knees while protecting your machine’s bodywork from scratching.

• Heavy-duty durable nylon material

• Mounts to snowmobile securely

• Sold in pairs

Part numbers

SMA-8LR10-00-00 Black

Part numbers

SMA-8LR24-00-BK Black

Sidewinder M-TX LE 153 Mountain

Snowmobile Handguards Mounts

Made of sturdy plastic, this mounting kit is necessary for the installation of the snowmobile handguards: SMA-8LYHG-00BK (sold separately)

• Sold in pairs

Part numbers

SMA-8LYMT-00-00 Black

Required parts

SMA-8LYHG-00-BK Snowmobile Handguards

Snowmobile Handguards

Stylised protection for your hands from the chilling winds

• Sold in pairs

• Requires Mounting Hardware: Part #SMA8LYMT-00-00 (sold separately)

Part numbers

SMA-8LYHG-00-BK Black

Required parts

SMA-8LYMT-00-00 Snowmobile Handguards Mounts

Colored Snow Flap

Add some style and flair by simply replacing the stock flap on your snowmobile.

• Sold Individually

• The Snow Flaps come in three colours

• Easy installation

• Mounting hardware is included

Switch Guards

Helps prevent accidental shut off of control switches.

• Hand/thumb warmer guard

• Stop switch guard

• Adhesive backing

Part numbers

SMA-8JP77-59-BL Blue

SMA-8JP77-59-BK Black

SMA-8JP77-59-RD Red

Part numbers

SMA-8KG86-00-00 Black

Windshield Bag

Offers convenient, easy-access storage for all essentials you need to take out on the trails.

• Made of durable, weather resistant nylon with colored accents material

• Larger bag, perfect for storage of phones, keys, wallet, camera, small tools, etc.

• Uses windshield mounting points for installation

Spot Light Kit

Enhances sight in low-light conditions with LED technology.

• Powerful spot light

• Easy installation with included hardware

• Easy installation using strong ThreeBond® adhesive for a permanent mount

• Powerful LED spot light with 18 LEDs

• Easy installation

• Ram mount with U bolt for rail mount included

• 12 volt output socket included

• Rubber ball absorbs shock and vibration

• Easily detachable from ram mount

• Weather-resistant rubber body shield

• On/off switch on the light

• Length of power cord is 125 cm-175 cm

• 30 degrees beam

• Frosted lens

• 9 watts

• 1900 lumens

• 4500K colour temp

Engine Stop Tether

Stay safe and prevent unfortunate events. This kit stops the engine In the event of getting separated from your snowmobile.

• End of the tether attaches to a jacket’s D-ring

Part numbers

SMA-8LR21-00-BK Black

Windshield Pack

Perfect for mountain and backcountry riders, this pack does double duty as both a sleek windshield and convenient storage for your unit.

• Semi-rigid construction

• Water-resistant

• Large zipper pull tabs easy to open and close with gloves on

Part numbers

ABA-2HR35-10-00 Black

Part numbers

SMA-8MS81-00-00 Red

Part numbers

SMA-8MS21-00-BK Black

Sidewinder M-TX LE 153 Mountain

Low Sport Windshield – Blue

Improved protection compared with stock windshield.

• Yamaha Racing Blue

• 37.5 cm tall

Medium Windshield

Adds both style and function while offering up even more wind protection for those especially cold days on the trail. Gives a custom look to the front profile of the snowmobile.

• Height is 18.5”

• Made of clear polycarbonate

• Pre-marked for accessory mirrors SMA8LJ26-00-00 sold seperately

Tall windshield

Higher screen to replace standard screen, providing enhanced wind protection especially for those cold days on the trail.

• Adding a custom look to the front profile

• Clear coloured, polycarbonate screen

• Screen height is 19,25inch

Part numbers

SMA-8MY96-11-BL Blue

Part numbers

SMA-8JP96-20-00 Transparent

SMA-8JP96-20-SM Smoke

Part numbers

8MH-K7210-00-00 Transparent

Extreme Low Windshield

For an upgraded look this stylish windshield fits the bill.

• Height is 6.5”

• Transparent

Part numbers

SMA-8JP96-00-BK Black

SMA-8JP96-00-RD Red

Tall Windshield

Higher screen to replace standard screen, providing enhanced wind and snow protection especially for those cold days on the trail.

• Clear coloured, polycarbonate screen

• Perfect for taller riders or those who prefer a more upright riding position

• Screen height is 27.2inch

Low Sport Windshield

Provide’s improved protection over stock. Adds a splash of colour with racing inspired graphics.

• Height is 14.75”

Part numbers

SMA-8JP96-30-00 Transparent

Part numbers

SMA-8JP96-11-BL Blue

SMA-8JP96-11-RD Red

SMA-8JP96-11-BK Black

Medium Sport Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail.

• Customize the look of your snowmobile

• Made of smoked polycarbonate

• Pre-marked for the optional mirrors

• 16.5” in size

Low Windshield

Aerodynamic, low profile windscreen complements the aggressive profile of the snowmobile’s front end.

• Made of smoked polycarbonate

• 10.25” in size

Part numbers

SMA-8LR96-21-SM Smoke

Part numbers

SMA-8LR96-10-SM Smoke

Sidewinder M-TX LE 153 Mountain

Medium Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail..

• Made of clear polycarbonate

• Customize the look of your snowmobile

• 18.5” in size

• Pre-marked for the optional mirrors

Tall Smoked Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail.

• Customize the look of your snowmobile

• Made of smoked polycarbonate

• 19.25” in size

Part numbers

SMA-8LR96-30-SM Smoke

Performance Grips

Slim and comfortable grip design offers better shock absorption.

• Sold in pairs

• Thinner material allows for more effective heat transfer from hand warmer elements

Part numbers

SMA-8LR96-20-SM Smoke

Custom Cover for SRViper M-TX

Protects unit during trailering or storage

• Cotton canvas is naturally very soft on the finish of the unit

• Vents moisture away

• Expandable windshield panel for accommodating taller accessory windshields

• Add Undercover Protector to protect windshield and shroud area, sold separately

• Strong, preshrunk, waterproof two-ply army duck canvas

Part numbers

SMA-8JP61-00-BK Black

Part numbers

SMA-COVER-88-00 Black

Super Sport Caddy Set

Caddy Set to move around easily your snowmobile.

• Constructed of lightweight, reinforced, multi-ribbed, injection-molded plastic

• Features twin wheel casters for greater stability

• Equipped with non-slip Hydro Turf® inserts

Metric Tool Kit

Comprehensive tool set that prepares you for just about anything the road will throw at you.

• Includes ring and open end combination spanners 8, 10, 12 & 14, an adjustable spanner, Vice Grips, 4 way Phillips and flat screwdrivers, sparkplug spanner and gap guage

• Includes also a roll of black electrical tape, tyre pressure gauge, cable ties, wire, rag and #3, 4, 5 & 6 Allen keys

• Comes in a compact roll-up pouch

• Can easily be stowed away in your saddlebag, side case, top case, etc.

Yamaha Cam Buckle Tie-downs

Strong and durable straps to tie your Yamaha or any other big object down tightly when transporting it in a van or trailer.

• Ease of operation; simple tensioning and one finger release

• Built-in soft hook on the fixed end for looping around handlebars, frame tubes, triple-tree clamps and other structural parts

• Zinc cam buckle is made with a pressure plate to reduce webbing abrasion

• Features the Yamaha logo at intervals

• Assembly strength: 540kg (1,200lb)

• Working load limit: 180kg (400lb)

• Sold per set of two

Snowmobile High-Performance Suspension Grease.

The best snowmobile grease for usage on advanced suspension systems, when needing to react quickly to rough trail conditions.

• Provides extensive protection and wear resistance

• Low temperature protection down to -65°F and yet protection up to 250°F

• Product should be used where service manual indicates ESSO Beacon 325 or Aeroshell Grease

Part numbers

SMA-CADDY-SC-BL Blue

Part numbers

ABA-METRC-00-00 Black

Part numbers

ACC-0SS58-40-28 Blue

Part numbers

ACC-SMBGR-SE-14 Black

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With EU-plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety: spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Battery Charger CTEK CS ONE Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Part numbers

YME-YEC09-EU-20 Black

Part numbers

YME-YEC01-EU-00 Black

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With UK plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety; spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers to fit our range of motorcycles, scooters, ATV, SMB and other products

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Disclaimer

Applicable to UK markets only

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Custom Storage Cover

Protects your unit from the elements during trailering or storage.

• Cotton canvas is naturally very soft on the finish of the unit

• An expandable windshield panel will accommodate the taller accessory windshields

• Military grade, water and mildew resistant material

Part numbers

YME-YEC09-UK-00 Black

Part numbers

YME-YEC01-UK-00 Black

Part numbers

SMA-8MR29-00-00 Black

Woody’s® Trail Blazer IV™ Runner Set

These runners have six inches of 60° turning carbide. They are great choice if you are looking for overall improvement in safety and handling, or to replace your factory runner.

• Sold in pairs

• 6” of 60º carbide on a ½” diameter host bar

• Use with a studded or un-studded track

Part numbers

SMA-TYV48-80-00 Black

Mountain Max LE 154 ES

Combination Trunk Bag

Increase your luggage space with options to spare and plenty of compartments to keep all items well organized.

• Tunnel bag with saddlebags combination

• Multi-compartment design

• Durable, weather resistant nylon

• Will not work in combination with the optional Two-Up Seat

Expandable Rack Pack

Perfect for when you need to bring that extra gear on your ride.

• Large capacity storage

• Quick-attach straps

• Fits in the Tunnel Rack, sold separately

Part numbers

SMA-8LR63-00-BK Black

Part numbers

SMA-8JY63-00-00 Black

Saddle Bags

When you need to bring along extra gear for your ride, these saddle bags are essential.

• Large bags, one on each side of the seat/ tunnel

• Durable, weather-resistant 1000-denier nylon

• 800-denier nylon accent material

• Mounted to the tunnel and under the seat

• Set of two

Part numbers

SMA-8LR73-00-BK Black

Mountain Max LE 154 ES Mountain

Medium Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 18.8L (.665 cf ) capacity

Large Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 21.8L (.77 cf ) capacity

Extra Large Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 22.9L (. 81 cf ) capacity

Part numbers

SMA-8MB63-00-BK Black

Part numbers

SMA-8MB64-00-BK Black

Part numbers

SMA-8MB65-00-BK Black

SMA-8LY43-00-00 Black Handlebar Bag

Add some convenient storage to your snowmobile with this multi-compartment bag. Mounts using both the handlebar and handlebar risers.

• Made of durable, weather resistant nylon.

Part numbers

Handlebar Bag

Add some convenient storage to your snowmobile with this multi-compartment handlebar bag.

• Durable, weather-resistant nylon

• Accent material in 800-denier nylon

• Mounted by using both the handlebar and handlebar risers

Deluxe Tunnel Bag

Pack a snack and extra essentials for that long or short ride.

• Semi-rigid bag

• Easily removable

Part numbers

SMA-8JP43-01-00 Black

M-TX Tunnel gear bag

Simple water-resistant moulded top tunnel pack perfect for the mountains.

• Mounts with quick attach straps to the rear grab bar

Part numbers

SMA-8JX63-00-00 Black

Woody’s® Carbide Wear Bar Runners - Trailblazer Series

The Woody’s® Carbide Wear Bar Runners - Trailblazer Series are designed for aggressive trail riders.

• Sold in pairs

• Carbide wear pads are a full 1½” long

• 6” of 60º carbide on a ½” diameter host bar

• Full length hard-weld between all three carbide inserts

Part numbers

SMA-8KG63-00-00 Black

Part numbers

SMA-TYV46-58-00 Black

Woody’s®

6” Ace Runner Set

This carbide runner is the tallest in the industry and has a narrow, rectangular profile for aggressive turning capabilities. Its 60° turning carbide (available in 6” & 8”) has been strategically placed to protect the runner and reduce darting by carving through existing grooves. Works great on Crossovers and in deep snow.

• Sold in pairs

• 6” of 60° turning carbide on a tall, square host bar

Part numbers

SMA-AY688-00-00 Black

Woody’s®

8” Ace Runner Set for the Sidewinder

This carbide runner is the tallest in the industry and has a narrow, rectangular profile for aggressive turning capabilities. Its 60° turning carbide (available in 6” & 8”) has been strategically placed to protect the runner and reduce darting by carving through existing grooves. Works great on Crossovers and in deep snow.

• Sold in pairs

• 8” of 60° turning carbide on a tall, square host bar

Rear Fourth Wheel Kit

Outside idler wheels help keep track in proper alignment and spreads load evenly across the entire track.

• Wheels

• Spacer blocks

• All necessary hardware

Part numbers

SMA-AY888-00-00 Black

Part numbers

SMA-8JY47-00-BK Black

Ice Scratchers

Helps prevent slide runner wear when on ice and hard pack snow.

• Rests on top of the slide rail when not in use or when backing up

• Not meant to use in reverse

• Sold in pairs

Part numbers

SMA-8JP38-00-KT Black

Windshield Mirror Kit

Accentuates the sporty styling of your snowmobile, while keeping aware of your surroundings.

• Mounted to outside of windshield

• Can be combined with the optional Medium Sport Windshield and optional Medium Windshield

Part numbers

SMA-8LJ26-00-00 Black

Required parts

SMA-8LJMR-AD-KT Mounting kit for Windshield Mirrors (Sidewinder and SRViper)

SMA-8LR96-21-SM Medium Sport Windshield

SMA-8LR96-30-SM Medium Windshield

DuPont Slides 174”

Perfect for everyday riding on the trails or in the mountains. Reduces the friction and protects the aluminum rails from track wear.

• DuPont Vespel® material inserts

• Space-age polymer / composite material

• 15T scale Rockwell hardness of about 80 (UHMW slide runner hardness rating is about R64)

• Capable of withstanding extreme friction and heat environments

• Pieces are placed at a 30-degree angle across the entire slider for constant contact and even wear

• Made using compression moulding process

• Partially made with current UHMW plastic slide runner material

• Sold Individually

Console Knee Pads

Add comfort and extra grip for your knees.

• Mounting hardware included

Part numbers

SMA-DPSSV-MT-00 Black

Scorchers™ Ice Scratchers

The kit lubricates the hyfax and assists cooling when riding on hard-packed trails or frozen lakes. The scratchers are constructed of eat-treated, heavy-duty steel springs. It also includes anodized CNC machined aircraft aluminum washers to ensure durability and high performance. Can be used with or without idler wheels.

• Stows away to a nested position when not in use

• Drilling may be required

Part numbers

SMA-8JP24-00-WH Black

Part numbers

SMA-ICESC-BK-00 Black

TRIC™ Ice Scratchers

The kit provides additional snow spray in hard-packed icy conditions to help reduce rear suspension hyfax wear and engine overheating. It creates a steady stream of ice crystals to provide both lubrication for the rear skid frame and additional cooling to the heat exchangers on liquid-cooled machines. Features stainless steel cables and adapters which can be rotated to allow for left or right applications. Also includes stainless steel hardware with universal mounting brackets.

• Includes 1/4” threaded replaceable carbide stud

• Allows operation of the reverse gear

• Sold in pairs

TRIC™ Ice Scratchers - Replacement Studs

The kit contains replacement studs for the TRIC™ Ice Scratchers.

• Uses common 1/4” thread

Part numbers

SMA-ICESC-02-ST Blue

Mounting kit for Windshield Mirrors (Sidewinder and SRViper)

Mounting kit for Windshield Mirrors (Sidewinder and SRViper).Only compatible with SMA-8LR96-21-SM & SMA-8LR9630-SM.

• Mounts to outside of windshield

Part numbers

SMA-ICESC-CB-AP Aluminium

Front Skid Plate

Improves approach angle and protects the nose cone from damage by stumps, rocks, ice chunks and other debris.

• Can be combined with the optional Rear Skid Plate

• Will not work in conbination with Sport Front Grab Bar

Part numbers

SMA-8LJMR-AD-KT Black

Optional parts

SMA-8LR96-21-SM Medium Sport Windshield

SMA-8LR96-30-SM Medium Windshield

Part numbers

SMA-8JP34-FR-BK Black

Floatation skid plate

Adds the maximum amount of protection and additional flotation, helping the snowmobile float through the powder.

• Does not fit up with optional accessory front bumpers

• Durable UHMW construction

• Incompatible with optional accessory front bumpers

• Mounting kit included

Rail Brace Kit

Designed with the hard-core riders in mind, these aluminium braces add strength to the stock rails.

• Only 3,4 [kg] per kit

• Easy, bolt-on installation

Part numbers

SMA-8KC34-00-BK Black

Part numbers

SMA-8MS60-BK-00 Black

Deluxe Heated Shield Outlet

Add a heated shield outlet to your snowmobile

• Dash mounted

• Equipped with cover to protect plug from ice and snow

• Simple installation with factory accessory pig-tail

Console Knee Pads

Add comfort and extra grip for your knees while protecting your machine’s bodywork from scratching.

• Heavy-duty durable nylon material

• Mounts to snowmobile securely

• Sold in pairs

Part numbers

SMA-8LR10-00-00 Black

Part numbers

SMA-8LR24-00-BK Black

Mountain Max LE 154 ES Mountain

Snowmobile Handguards Mounts

Made of sturdy plastic, this mounting kit is necessary for the installation of the snowmobile handguards: SMA-8LYHG-00BK (sold separately)

• Sold in pairs

Part numbers

SMA-8LYMT-00-00 Black

Required parts

SMA-8LYHG-00-BK Snowmobile Handguards

Snowmobile Handguards

Stylised protection for your hands from the chilling winds

• Sold in pairs

• Requires Mounting Hardware: Part #SMA8LYMT-00-00 (sold separately)

Part numbers

SMA-8LYHG-00-BK Black

Required parts

SMA-8LYMT-00-00 Snowmobile Handguards Mounts

Colored Snow Flap

Add some style and flair by simply replacing the stock flap on your snowmobile.

• Sold Individually

• The Snow Flaps come in three colours

• Easy installation

• Mounting hardware is included

Switch Guards

Helps prevent accidental shut off of control switches.

• Hand/thumb warmer guard

• Stop switch guard

• Adhesive backing

Part numbers

SMA-8JP77-59-BL Blue

SMA-8JP77-59-BK Black

SMA-8JP77-59-RD Red

Part numbers

SMA-8KG86-00-00 Black

Windshield Bag

Offers convenient, easy-access storage for all essentials you need to take out on the trails.

• Made of durable, weather resistant nylon with colored accents material

• Larger bag, perfect for storage of phones, keys, wallet, camera, small tools, etc.

• Uses windshield mounting points for installation

Spot Light Kit

Enhances sight in low-light conditions with LED technology.

• Powerful spot light

• Easy installation with included hardware

• Easy installation using strong ThreeBond® adhesive for a permanent mount

• Powerful LED spot light with 18 LEDs

• Easy installation

• Ram mount with U bolt for rail mount included

• 12 volt output socket included

• Rubber ball absorbs shock and vibration

• Easily detachable from ram mount

• Weather-resistant rubber body shield

• On/off switch on the light

• Length of power cord is 125 cm-175 cm

• 30 degrees beam

• Frosted lens

• 9 watts

• 1900 lumens

• 4500K colour temp

Engine Stop Tether

Stay safe and prevent unfortunate events. This kit stops the engine In the event of getting separated from your snowmobile.

• End of the tether attaches to a jacket’s D-ring

Part numbers

SMA-8LR21-00-BK Black

Windshield Pack

Perfect for mountain and backcountry riders, this pack does double duty as both a sleek windshield and convenient storage for your unit.

• Semi-rigid construction

• Water-resistant

• Large zipper pull tabs easy to open and close with gloves on

Part numbers

ABA-2HR35-10-00 Black

Part numbers

SMA-8MS81-00-00 Red

Part numbers

SMA-8MS21-00-BK Black

Mountain Max LE 154 ES Mountain

Low Sport Windshield – Blue

Improved protection compared with stock windshield.

• Yamaha Racing Blue

• 37.5 cm tall

Medium Windshield

Adds both style and function while offering up even more wind protection for those especially cold days on the trail. Gives a custom look to the front profile of the snowmobile.

• Height is 18.5”

• Made of clear polycarbonate

• Pre-marked for accessory mirrors SMA8LJ26-00-00 sold seperately

Tall windshield

Higher screen to replace standard screen, providing enhanced wind protection especially for those cold days on the trail.

• Adding a custom look to the front profile

• Clear coloured, polycarbonate screen

• Screen height is 19,25inch

Part numbers

SMA-8MY96-11-BL Blue

Part numbers

SMA-8JP96-20-00 Transparent

SMA-8JP96-20-SM Smoke

Part numbers

8MH-K7210-00-00 Transparent

Extreme Low Windshield

For an upgraded look this stylish windshield fits the bill.

• Height is 6.5”

• Transparent

Part numbers

SMA-8JP96-00-BK Black

SMA-8JP96-00-RD Red

Tall Windshield

Higher screen to replace standard screen, providing enhanced wind and snow protection especially for those cold days on the trail.

• Clear coloured, polycarbonate screen

• Perfect for taller riders or those who prefer a more upright riding position

• Screen height is 27.2inch

Low Sport Windshield

Provide’s improved protection over stock. Adds a splash of colour with racing inspired graphics.

• Height is 14.75”

Part numbers

SMA-8JP96-30-00 Transparent

Part numbers

SMA-8JP96-11-BL Blue

SMA-8JP96-11-RD Red

SMA-8JP96-11-BK Black

Medium Sport Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail.

• Customize the look of your snowmobile

• Made of smoked polycarbonate

• Pre-marked for the optional mirrors

• 16.5” in size

Low Windshield

Aerodynamic, low profile windscreen complements the aggressive profile of the snowmobile’s front end.

• Made of smoked polycarbonate

• 10.25” in size

Part numbers

SMA-8LR96-21-SM Smoke

Part numbers

SMA-8LR96-10-SM Smoke

Mountain Max LE 154 ES Mountain

Medium Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail..

• Made of clear polycarbonate

• Customize the look of your snowmobile

• 18.5” in size

• Pre-marked for the optional mirrors

Tall Smoked Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail.

• Customize the look of your snowmobile

• Made of smoked polycarbonate

• 19.25” in size

Part numbers

SMA-8LR96-30-SM Smoke

Performance Grips

Slim and comfortable grip design offers better shock absorption.

• Sold in pairs

• Thinner material allows for more effective heat transfer from hand warmer elements

Part numbers

SMA-8LR96-20-SM Smoke

Custom Cover for SRViper M-TX

Protects unit during trailering or storage

• Cotton canvas is naturally very soft on the finish of the unit

• Vents moisture away

• Expandable windshield panel for accommodating taller accessory windshields

• Add Undercover Protector to protect windshield and shroud area, sold separately

• Strong, preshrunk, waterproof two-ply army duck canvas

Part numbers

SMA-8JP61-00-BK Black

Part numbers

SMA-COVER-88-00 Black

Super Sport Caddy Set

Caddy Set to move around easily your snowmobile.

• Constructed of lightweight, reinforced, multi-ribbed, injection-molded plastic

• Features twin wheel casters for greater stability

• Equipped with non-slip Hydro Turf® inserts

Metric Tool Kit

Comprehensive tool set that prepares you for just about anything the road will throw at you.

• Includes ring and open end combination spanners 8, 10, 12 & 14, an adjustable spanner, Vice Grips, 4 way Phillips and flat screwdrivers, sparkplug spanner and gap guage

• Includes also a roll of black electrical tape, tyre pressure gauge, cable ties, wire, rag and #3, 4, 5 & 6 Allen keys

• Comes in a compact roll-up pouch

• Can easily be stowed away in your saddlebag, side case, top case, etc.

Snowmobile Storage Cover

Protects your unit from the elements during trailering or storage. The back is coated with urethane to provide an excellent barrier to the elements and road grime. It includes soft, sewn in polyester undercover that helps protect your unit’s finish while storing and transporting. It has an expandable windshield panel that will accommodate the taller accessory windscreens

• Made of premium, UV resistant Polyester

• Matches the graphics on the Mountain Max

Yamaha Cam Buckle Tie-downs

Strong and durable straps to tie your Yamaha or any other big object down tightly when transporting it in a van or trailer.

• Ease of operation; simple tensioning and one finger release

• Built-in soft hook on the fixed end for looping around handlebars, frame tubes, triple-tree clamps and other structural parts

• Zinc cam buckle is made with a pressure plate to reduce webbing abrasion

• Features the Yamaha logo at intervals

• Assembly strength: 540kg (1,200lb)

• Working load limit: 180kg (400lb)

• Sold per set of two

Part numbers

SMA-CADDY-SC-BL Blue

Part numbers

ABA-METRC-00-00 Black

Part numbers

SMA-8NS30-LE-00 Blue

Part numbers

ACC-0SS58-40-28 Blue

Mountain Max LE 154 ES Mountain

Snowmobile High-Performance Suspension Grease.

The best snowmobile grease for usage on advanced suspension systems, when needing to react quickly to rough trail conditions.

• Provides extensive protection and wear resistance

• Low temperature protection down to -65°F and yet protection up to 250°F

• Product should be used where service manual indicates ESSO Beacon 325 or Aeroshell Grease

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With EU-plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety: spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Part numbers

ACC-SMBGR-SE-14 Black

Part numbers

YME-YEC09-EU-20 Black

Part numbers

YME-YEC01-EU-00 Black

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With UK plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety; spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers to fit our range of motorcycles, scooters, ATV, SMB and other products

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Disclaimer

Applicable to UK markets only

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Woody’s® Trail Blazer IV™ Runner Set

These runners have six inches of 60° turning carbide. They are great choice if you are looking for overall improvement in safety and handling, or to replace your factory runner.

• Sold in pairs

• 6” of 60º carbide on a ½” diameter host bar

• Use with a studded or un-studded track

Part numbers

YME-YEC09-UK-00 Black

Part numbers

YME-YEC01-UK-00 Black

Part numbers

SMA-TYV48-80-00 Black

SXVenom Mountain

Combination Trunk Bag

Increase your luggage space with options to spare and plenty of compartments to keep all items well organized.

• Tunnel bag with saddlebags combination

• Multi-compartment design

• Durable, weather resistant nylon

• Will not work in combination with the optional Two-Up Seat

Expandable Rack Pack

Perfect for when you need to bring that extra gear on your ride.

• Large capacity storage

• Quick-attach straps

• Fits in the Tunnel Rack, sold separately

Part numbers

SMA-8LR63-00-BK Black

Part numbers

SMA-8JY63-00-00 Black

Saddle Bags

When you need to bring along extra gear for your ride, these saddle bags are essential.

• Large bags, one on each side of the seat/ tunnel

• Durable, weather-resistant 1000-denier nylon

• 800-denier nylon accent material

• Mounted to the tunnel and under the seat

• Set of two

Part numbers

SMA-8LR73-00-BK Black

Medium Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 18.8L (.665 cf ) capacity

Large Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 21.8L (.77 cf ) capacity

Extra Large Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 22.9L (. 81 cf ) capacity

Handlebar Bag

Add some convenient storage to your snowmobile with this multi-compartment bag. Mounts using both the handlebar and handlebar risers.

• Made of durable, weather resistant nylon.

Part numbers

SMA-8MB63-00-BK Black

Part numbers

SMA-8MB64-00-BK Black

Part numbers

SMA-8MB65-00-BK Black

Part numbers

SMA-8LY43-00-00 Black

SXVenom Mountain Mountain

Handlebar Bag

Add some convenient storage to your snowmobile with this multi-compartment handlebar bag.

• Durable, weather-resistant nylon

• Accent material in 800-denier nylon

• Mounted by using both the handlebar and handlebar risers

Deluxe Tunnel Bag

Pack a snack and extra essentials for that long or short ride.

• Semi-rigid bag

• Easily removable

Part numbers

SMA-8JP43-01-00 Black

M-TX Tunnel gear bag

Simple water-resistant moulded top tunnel pack perfect for the mountains.

• Mounts with quick attach straps to the rear grab bar

Part numbers

SMA-8JX63-00-00 Black

Woody’s® Carbide Wear Bar Runners - Trailblazer Series

The Woody’s® Carbide Wear Bar Runners - Trailblazer Series are designed for aggressive trail riders.

• Sold in pairs

• Carbide wear pads are a full 1½” long

• 6” of 60º carbide on a ½” diameter host bar

• Full length hard-weld between all three carbide inserts

Part numbers

SMA-8KG63-00-00 Black

Part numbers

SMA-TYV46-58-00 Black

Woody’s®

6” Ace Runner Set

This carbide runner is the tallest in the industry and has a narrow, rectangular profile for aggressive turning capabilities. Its 60° turning carbide (available in 6” & 8”) has been strategically placed to protect the runner and reduce darting by carving through existing grooves. Works great on Crossovers and in deep snow.

• Sold in pairs

• 6” of 60° turning carbide on a tall, square host bar

Part numbers

SMA-AY688-00-00 Black

Woody’s®

8” Ace Runner Set for the Sidewinder

This carbide runner is the tallest in the industry and has a narrow, rectangular profile for aggressive turning capabilities. Its 60° turning carbide (available in 6” & 8”) has been strategically placed to protect the runner and reduce darting by carving through existing grooves. Works great on Crossovers and in deep snow.

• Sold in pairs

• 8” of 60° turning carbide on a tall, square host bar

Rear Fourth Wheel Kit

Outside idler wheels help keep track in proper alignment and spreads load evenly across the entire track.

• Wheels

• Spacer blocks

• All necessary hardware

Part numbers

SMA-AY888-00-00 Black

Part numbers

SMA-8JY47-00-BK Black

Ice Scratchers

Helps prevent slide runner wear when on ice and hard pack snow.

• Rests on top of the slide rail when not in use or when backing up

• Not meant to use in reverse

• Sold in pairs

Part numbers

SMA-8JP38-00-KT Black

SXVenom Mountain Mountain

Windshield Mirror Kit

Accentuates the sporty styling of your snowmobile, while keeping aware of your surroundings.

• Mounted to outside of windshield

• Can be combined with the optional Medium Sport Windshield and optional Medium Windshield

Part numbers

SMA-8LJ26-00-00 Black

Required parts

SMA-8LJMR-AD-KT Mounting kit for Windshield Mirrors (Sidewinder and SRViper)

SMA-8LR96-21-SM Medium Sport Windshield

SMA-8LR96-30-SM Medium Windshield

DuPont Slides 174”

Perfect for everyday riding on the trails or in the mountains. Reduces the friction and protects the aluminum rails from track wear.

• DuPont Vespel® material inserts

• Space-age polymer / composite material

• 15T scale Rockwell hardness of about 80 (UHMW slide runner hardness rating is about R64)

• Capable of withstanding extreme friction and heat environments

• Pieces are placed at a 30-degree angle across the entire slider for constant contact and even wear

• Made using compression moulding process

• Partially made with current UHMW plastic slide runner material

• Sold Individually

Console Knee Pads

Add comfort and extra grip for your knees.

• Mounting hardware included

Part numbers

SMA-DPSSV-MT-00 Black

Scorchers™ Ice Scratchers

The kit lubricates the hyfax and assists cooling when riding on hard-packed trails or frozen lakes. The scratchers are constructed of eat-treated, heavy-duty steel springs. It also includes anodized CNC machined aircraft aluminum washers to ensure durability and high performance. Can be used with or without idler wheels.

• Stows away to a nested position when not in use

• Drilling may be required

Part numbers

SMA-8JP24-00-WH Black

Part numbers

SMA-ICESC-BK-00 Black

TRIC™ Ice Scratchers

The kit provides additional snow spray in hard-packed icy conditions to help reduce rear suspension hyfax wear and engine overheating. It creates a steady stream of ice crystals to provide both lubrication for the rear skid frame and additional cooling to the heat exchangers on liquid-cooled machines. Features stainless steel cables and adapters which can be rotated to allow for left or right applications. Also includes stainless steel hardware with universal mounting brackets.

• Includes 1/4” threaded replaceable carbide stud

• Allows operation of the reverse gear

• Sold in pairs

TRIC™ Ice Scratchers - Replacement Studs

The kit contains replacement studs for the TRIC™ Ice Scratchers.

• Uses common 1/4” thread

Part numbers

SMA-ICESC-02-ST Blue

Mounting kit for Windshield Mirrors (Sidewinder and SRViper)

Mounting kit for Windshield Mirrors (Sidewinder and SRViper).Only compatible with SMA-8LR96-21-SM & SMA-8LR9630-SM.

• Mounts to outside of windshield

Part numbers

SMA-ICESC-CB-AP Aluminium

Front Skid Plate

Improves approach angle and protects the nose cone from damage by stumps, rocks, ice chunks and other debris.

• Can be combined with the optional Rear Skid Plate

• Will not work in conbination with Sport Front Grab Bar

Part numbers

SMA-8LJMR-AD-KT Black

Optional parts

SMA-8LR96-21-SM Medium Sport Windshield

SMA-8LR96-30-SM Medium Windshield

Part numbers

SMA-8JP34-FR-BK Black

SXVenom Mountain Mountain

Floatation skid plate

Adds the maximum amount of protection and additional flotation, helping the snowmobile float through the powder.

• Does not fit up with optional accessory front bumpers

• Durable UHMW construction

• Incompatible with optional accessory front bumpers

• Mounting kit included

Rail Brace Kit

Designed with the hard-core riders in mind, these aluminium braces add strength to the stock rails.

• Only 3,4 [kg] per kit

• Easy, bolt-on installation

Part numbers

SMA-8KC34-00-BK Black

Part numbers

SMA-8MS60-BK-00 Black

Deluxe Heated Shield Outlet

Add a heated shield outlet to your snowmobile

• Dash mounted

• Equipped with cover to protect plug from ice and snow

• Simple installation with factory accessory pig-tail

Console Knee Pads

Add comfort and extra grip for your knees while protecting your machine’s bodywork from scratching.

• Heavy-duty durable nylon material

• Mounts to snowmobile securely

• Sold in pairs

Part numbers

SMA-8LR10-00-00 Black

Part numbers

SMA-8LR24-00-BK Black

Mountain SXVenom Mountain

Snowmobile Handguards Mounts

Made of sturdy plastic, this mounting kit is necessary for the installation of the snowmobile handguards: SMA-8LYHG-00BK (sold separately)

• Sold in pairs

Part numbers

SMA-8LYMT-00-00 Black

Required parts

SMA-8LYHG-00-BK Snowmobile Handguards

Colored Snow Flap

Add some style and flair by simply replacing the stock flap on your snowmobile.

• Sold Individually

• The Snow Flaps come in three colours

• Easy installation

• Mounting hardware is included

Snowmobile Handguards

Stylised protection for your hands from the chilling winds

• Sold in pairs

• Requires Mounting Hardware: Part #SMA8LYMT-00-00 (sold separately)

Part numbers

SMA-8JP77-59-BL Blue

SMA-8JP77-59-BK Black

SMA-8JP77-59-RD Red

Part numbers

SMA-8LYHG-00-BK Black

Required parts

SMA-8LYMT-00-00 Snowmobile Handguards Mounts

Switch Guards

Helps prevent accidental shut off of control switches.

• Hand/thumb warmer guard

• Stop switch guard

• Adhesive backing

Part numbers

SMA-8KG86-00-00 Black

SXVenom Mountain Mountain

Rear Skid Plate

The Rear Skid Plate gives full coverage protection for your clutch, exhaust, and chain case components.

• May not be exactly as shown in the photo.

Part numbers

SMA-8NU34-00-00 Black

Windshield Bag

Offers convenient, easy-access storage for all essentials you need to take out on the trails.

• Made of durable, weather resistant nylon with colored accents material

• Larger bag, perfect for storage of phones, keys, wallet, camera, small tools, etc.

• Uses windshield mounting points for installation

Spot Light Kit

Enhances sight in low-light conditions with LED technology.

• Powerful spot light

• Easy installation with included hardware

• Easy installation using strong ThreeBond® adhesive for a permanent mount

• Powerful LED spot light with 18 LEDs

• Easy installation

• Ram mount with U bolt for rail mount included

• 12 volt output socket included

• Rubber ball absorbs shock and vibration

• Easily detachable from ram mount

• Weather-resistant rubber body shield

• On/off switch on the light

• Length of power cord is 125 cm-175 cm

• 30 degrees beam

• Frosted lens

• 9 watts

• 1900 lumens

• 4500K colour temp

Engine Stop Tether

Stay safe and prevent unfortunate events. This kit stops the engine In the event of getting separated from your snowmobile.

• End of the tether attaches to a jacket’s D-ring

Part numbers

SMA-8LR21-00-BK Black

Part numbers

ABA-2HR35-10-00 Black

Part numbers

SMA-8MS81-00-00 Red

Mountain SXVenom Mountain

Windshield Pack

Perfect for mountain and backcountry riders, this pack does double duty as both a sleek windshield and convenient storage for your unit.

• Semi-rigid construction

• Water-resistant

• Large zipper pull tabs easy to open and close with gloves on

Low Sport Windshield – Blue

Improved protection compared with stock windshield.

• Yamaha Racing Blue

• 37.5 cm tall

Medium Windshield

Adds both style and function while offering up even more wind protection for those especially cold days on the trail. Gives a custom look to the front profile of the snowmobile.

• Height is 18.5”

• Made of clear polycarbonate

• Pre-marked for accessory mirrors SMA8LJ26-00-00 sold seperately

Tall windshield

Higher screen to replace standard screen, providing enhanced wind protection especially for those cold days on the trail.

• Adding a custom look to the front profile

• Clear coloured, polycarbonate screen

• Screen height is 19,25inch

Part numbers

SMA-8MS21-00-BK Black

Part numbers

SMA-8MY96-11-BL Blue

Part numbers

SMA-8JP96-20-00

Transparent

SMA-8JP96-20-SM Smoke

Part numbers

8MH-K7210-00-00

Transparent

SXVenom Mountain Mountain

Extreme Low Windshield

For an upgraded look this stylish windshield fits the bill.

• Height is 6.5”

• Transparent

Part numbers

SMA-8JP96-00-BK Black

SMA-8JP96-00-RD Red

Tall Windshield

Higher screen to replace standard screen, providing enhanced wind and snow protection especially for those cold days on the trail.

• Clear coloured, polycarbonate screen

• Perfect for taller riders or those who prefer a more upright riding position

• Screen height is 27.2inch

Low Sport Windshield

Provide’s improved protection over stock. Adds a splash of colour with racing inspired graphics.

• Height is 14.75”

Part numbers

SMA-8JP96-30-00 Transparent

Part numbers

SMA-8JP96-11-BL Blue

SMA-8JP96-11-RD Red

SMA-8JP96-11-BK Black

Medium Sport Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail.

• Customize the look of your snowmobile

• Made of smoked polycarbonate

• Pre-marked for the optional mirrors

• 16.5” in size

Part numbers

SMA-8LR96-21-SM Smoke

Low Windshield

Aerodynamic, low profile windscreen complements the aggressive profile of the snowmobile’s front end.

• Made of smoked polycarbonate

• 10.25” in size

Part numbers

SMA-8LR96-10-SM Smoke

Medium Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail..

• Made of clear polycarbonate

• Customize the look of your snowmobile

• 18.5” in size

• Pre-marked for the optional mirrors

Tall Smoked Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail.

• Customize the look of your snowmobile

• Made of smoked polycarbonate

• 19.25” in size

Part numbers

SMA-8LR96-30-SM Smoke

Performance Grips

Slim and comfortable grip design offers better shock absorption.

• Sold in pairs

• Thinner material allows for more effective heat transfer from hand warmer elements

Part numbers

SMA-8LR96-20-SM Smoke

Part numbers

SMA-8JP61-00-BK Black

SXVenom Mountain Mountain

Custom Cover for SRViper M-TX

Protects unit during trailering or storage

• Cotton canvas is naturally very soft on the finish of the unit

• Vents moisture away

• Expandable windshield panel for accommodating taller accessory windshields

• Add Undercover Protector to protect windshield and shroud area, sold separately

• Strong, preshrunk, waterproof two-ply army duck canvas

Super Sport Caddy Set

Caddy Set to move around easily your snowmobile.

• Constructed of lightweight, reinforced, multi-ribbed, injection-molded plastic

• Features twin wheel casters for greater stability

• Equipped with non-slip Hydro Turf® inserts

Metric Tool Kit

Comprehensive tool set that prepares you for just about anything the road will throw at you.

• Includes ring and open end combination spanners 8, 10, 12 & 14, an adjustable spanner, Vice Grips, 4 way Phillips and flat screwdrivers, sparkplug spanner and gap guage

• Includes also a roll of black electrical tape, tyre pressure gauge, cable ties, wire, rag and #3, 4, 5 & 6 Allen keys

• Comes in a compact roll-up pouch

• Can easily be stowed away in your saddlebag, side case, top case, etc.

Snowmobile Storage Cover

Protects your unit from the elements during trailering or storage. The back is coated with urethane to provide an excellent barrier to the elements and road grime. It includes soft, sewn in polyester undercover that helps protect your unit’s finish while storing and transporting. It has an expandable windshield panel that will accommodate the taller accessory windscreens

• Made of premium, UV resistant Polyester

• Matches the graphics on the Mountain Max

Part numbers

SMA-COVER-88-00 Black

Part numbers

SMA-CADDY-SC-BL Blue

Part numbers

ABA-METRC-00-00 Black

Part numbers

SMA-8NS30-LE-00 Blue

Mountain SXVenom Mountain

Yamaha Cam Buckle Tie-downs

Strong and durable straps to tie your Yamaha or any other big object down tightly when transporting it in a van or trailer.

• Ease of operation; simple tensioning and one finger release

• Built-in soft hook on the fixed end for looping around handlebars, frame tubes, triple-tree clamps and other structural parts

• Zinc cam buckle is made with a pressure plate to reduce webbing abrasion

• Features the Yamaha logo at intervals

• Assembly strength: 540kg (1,200lb)

• Working load limit: 180kg (400lb)

• Sold per set of two

Snowmobile High-Performance Suspension Grease.

The best snowmobile grease for usage on advanced suspension systems, when needing to react quickly to rough trail conditions.

• Provides extensive protection and wear resistance

• Low temperature protection down to -65°F and yet protection up to 250°F

• Product should be used where service manual indicates ESSO Beacon 325 or Aeroshell Grease

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With EU-plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety: spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Part numbers

ACC-0SS58-40-28 Blue

Part numbers

ACC-SMBGR-SE-14 Black

Part numbers

YME-YEC09-EU-20 Black

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With UK plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety; spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers to fit our range of motorcycles, scooters, ATV, SMB and other products

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Disclaimer

Applicable to UK markets only

Part numbers

YME-YEC01-EU-00 Black

Part numbers

YME-YEC09-UK-00 Black

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Woody’s® Trail Blazer IV™ Runner Set

These runners have six inches of 60° turning carbide. They are great choice if you are looking for overall improvement in safety and handling, or to replace your factory runner.

• Sold in pairs

• 6” of 60º carbide on a ½” diameter host bar

• Use with a studded or un-studded track

Part numbers

YME-YEC01-UK-00 Black

Part numbers

SMA-TYV48-80-00 Black

Mountain Max LE 154 SL

Mountain

Combination Trunk Bag

Increase your luggage space with options to spare and plenty of compartments to keep all items well organized.

• Tunnel bag with saddlebags combination

• Multi-compartment design

• Durable, weather resistant nylon

• Will not work in combination with the optional Two-Up Seat

Expandable Rack Pack

Perfect for when you need to bring that extra gear on your ride.

• Large capacity storage

• Quick-attach straps

• Fits in the Tunnel Rack, sold separately

Part numbers

SMA-8LR63-00-BK Black

Part numbers

SMA-8JY63-00-00 Black

Saddle Bags

When you need to bring along extra gear for your ride, these saddle bags are essential.

• Large bags, one on each side of the seat/ tunnel

• Durable, weather-resistant 1000-denier nylon

• 800-denier nylon accent material

• Mounted to the tunnel and under the seat

• Set of two

Part numbers

SMA-8LR73-00-BK Black

Medium Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 18.8L (.665 cf ) capacity

Large Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 21.8L (.77 cf ) capacity

Extra Large Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 22.9L (. 81 cf ) capacity

Handlebar Bag

Add some convenient storage to your snowmobile with this multi-compartment bag. Mounts using both the handlebar and handlebar risers.

• Made of durable, weather resistant nylon.

Part numbers

SMA-8MB63-00-BK Black

Part numbers

SMA-8MB64-00-BK Black

Part numbers

SMA-8MB65-00-BK Black

Part numbers

SMA-8LY43-00-00 Black

Mountain Max LE 154 SL Mountain

Handlebar Bag

Add some convenient storage to your snowmobile with this multi-compartment handlebar bag.

• Durable, weather-resistant nylon

• Accent material in 800-denier nylon

• Mounted by using both the handlebar and handlebar risers

Deluxe Tunnel Bag

Pack a snack and extra essentials for that long or short ride.

• Semi-rigid bag

• Easily removable

Part numbers

SMA-8JP43-01-00 Black

M-TX Tunnel gear bag

Simple water-resistant moulded top tunnel pack perfect for the mountains.

• Mounts with quick attach straps to the rear grab bar

Part numbers

SMA-8JX63-00-00 Black

Woody’s® Carbide Wear Bar Runners - Trailblazer Series

The Woody’s® Carbide Wear Bar Runners - Trailblazer Series are designed for aggressive trail riders.

• Sold in pairs

• Carbide wear pads are a full 1½” long

• 6” of 60º carbide on a ½” diameter host bar

• Full length hard-weld between all three carbide inserts

Part numbers

SMA-8KG63-00-00 Black

Part numbers

SMA-TYV46-58-00 Black

Woody’s® 6” Ace Runner Set

This carbide runner is the tallest in the industry and has a narrow, rectangular profile for aggressive turning capabilities. Its 60° turning carbide (available in 6” & 8”) has been strategically placed to protect the runner and reduce darting by carving through existing grooves. Works great on Crossovers and in deep snow.

• Sold in pairs

• 6” of 60° turning carbide on a tall, square host bar

Woody’s® 8” Ace Runner Set for the Sidewinder

This carbide runner is the tallest in the industry and has a narrow, rectangular profile for aggressive turning capabilities. Its 60° turning carbide (available in 6” & 8”) has been strategically placed to protect the runner and reduce darting by carving through existing grooves. Works great on Crossovers and in deep snow.

• Sold in pairs

• 8” of 60° turning carbide on a tall, square host bar

Rear Fourth Wheel Kit

Outside idler wheels help keep track in proper alignment and spreads load evenly across the entire track.

• Wheels

• Spacer blocks

• All necessary hardware

Part numbers

SMA-AY688-00-00 Black

Part numbers

SMA-AY888-00-00 Black

Part numbers

SMA-8JY47-00-BK Black

Ice Scratchers

Helps prevent slide runner wear when on ice and hard pack snow.

• Rests on top of the slide rail when not in use or when backing up

• Not meant to use in reverse

• Sold in pairs

Part numbers

SMA-8JP38-00-KT Black

Mountain Max LE 154 SL Mountain

Windshield Mirror Kit

Accentuates the sporty styling of your snowmobile, while keeping aware of your surroundings.

• Mounted to outside of windshield

• Can be combined with the optional Medium Sport Windshield and optional Medium Windshield

Part numbers

SMA-8LJ26-00-00 Black

Required parts

SMA-8LJMR-AD-KT Mounting kit for Windshield Mirrors (Sidewinder and SRViper)

SMA-8LR96-21-SM Medium Sport Windshield

SMA-8LR96-30-SM Medium Windshield

DuPont Slides 174”

Perfect for everyday riding on the trails or in the mountains. Reduces the friction and protects the aluminum rails from track wear.

• DuPont Vespel® material inserts

• Space-age polymer / composite material

• 15T scale Rockwell hardness of about 80 (UHMW slide runner hardness rating is about R64)

• Capable of withstanding extreme friction and heat environments

• Pieces are placed at a 30-degree angle across the entire slider for constant contact and even wear

• Made using compression moulding process

• Partially made with current UHMW plastic slide runner material

• Sold Individually

Console Knee Pads

Add comfort and extra grip for your knees.

• Mounting hardware included

Part numbers

SMA-DPSSV-MT-00 Black

Scorchers™ Ice Scratchers

The kit lubricates the hyfax and assists cooling when riding on hard-packed trails or frozen lakes. The scratchers are constructed of eat-treated, heavy-duty steel springs. It also includes anodized CNC machined aircraft aluminum washers to ensure durability and high performance. Can be used with or without idler wheels.

• Stows away to a nested position when not in use

• Drilling may be required

Part numbers

SMA-8JP24-00-WH Black

Part numbers

SMA-ICESC-BK-00 Black

TRIC™ Ice Scratchers

The kit provides additional snow spray in hard-packed icy conditions to help reduce rear suspension hyfax wear and engine overheating. It creates a steady stream of ice crystals to provide both lubrication for the rear skid frame and additional cooling to the heat exchangers on liquid-cooled machines. Features stainless steel cables and adapters which can be rotated to allow for left or right applications. Also includes stainless steel hardware with universal mounting brackets.

• Includes 1/4” threaded replaceable carbide stud

• Allows operation of the reverse gear

• Sold in pairs

TRIC™ Ice Scratchers - Replacement Studs

The kit contains replacement studs for the TRIC™ Ice Scratchers.

• Uses common 1/4” thread

Part numbers

SMA-ICESC-02-ST Blue

Mounting kit for Windshield Mirrors (Sidewinder and SRViper)

Mounting kit for Windshield Mirrors (Sidewinder and SRViper).Only compatible with SMA-8LR96-21-SM & SMA-8LR9630-SM.

• Mounts to outside of windshield

Part numbers

SMA-ICESC-CB-AP Aluminium

Front Skid Plate

Improves approach angle and protects the nose cone from damage by stumps, rocks, ice chunks and other debris.

• Can be combined with the optional Rear Skid Plate

• Will not work in conbination with Sport Front Grab Bar

Part numbers

SMA-8LJMR-AD-KT Black

Optional parts

SMA-8LR96-21-SM Medium Sport Windshield

SMA-8LR96-30-SM Medium Windshield

Part numbers

SMA-8JP34-FR-BK Black

Mountain Max LE 154 SL Mountain

Floatation skid plate

Adds the maximum amount of protection and additional flotation, helping the snowmobile float through the powder.

• Does not fit up with optional accessory front bumpers

• Durable UHMW construction

• Incompatible with optional accessory front bumpers

• Mounting kit included

Deluxe Heated Shield Outlet

Add a heated shield outlet to your snowmobile

• Dash mounted

• Equipped with cover to protect plug from ice and snow

• Simple installation with factory accessory pig-tail

Part numbers

SMA-8KC34-00-BK Black

Part numbers

SMA-8LR10-00-00 Black

Rail Brace Kit

Designed with the hard-core riders in mind, these aluminium braces add strength to the stock rails.

• Only 3,4 [kg] per kit

• Easy, bolt-on installation

Part numbers

SMA-8MS60-BK-00 Black

Console Knee Pads

Add comfort and extra grip for your knees while protecting your machine’s bodywork from scratching.

• Heavy-duty durable nylon material

• Mounts to snowmobile securely

• Sold in pairs

Part numbers

SMA-8LR24-00-BK Black

Snowmobile Handguards Mounts

Made of sturdy plastic, this mounting kit is necessary for the installation of the snowmobile handguards: SMA-8LYHG-00BK (sold separately)

• Sold in pairs

Part numbers

SMA-8LYMT-00-00 Black

Required parts

SMA-8LYHG-00-BK Snowmobile Handguards

Colored Snow Flap

Add some style and flair by simply replacing the stock flap on your snowmobile.

• Sold Individually

• The Snow Flaps come in three colours

• Easy installation

• Mounting hardware is included

Snowmobile Handguards

Stylised protection for your hands from the chilling winds

• Sold in pairs

• Requires Mounting Hardware: Part #SMA8LYMT-00-00 (sold separately)

Part numbers

SMA-8JP77-59-BL Blue

SMA-8JP77-59-BK Black

SMA-8JP77-59-RD Red

Part numbers

SMA-8LYHG-00-BK Black

Required parts

SMA-8LYMT-00-00 Snowmobile Handguards Mounts

Switch Guards

Helps prevent accidental shut off of control switches.

• Hand/thumb warmer guard

• Stop switch guard

• Adhesive backing

Part numbers

SMA-8KG86-00-00 Black

Mountain Max LE 154 SL Mountain

Windshield Bag

Offers convenient, easy-access storage for all essentials you need to take out on the trails.

• Made of durable, weather resistant nylon with colored accents material

• Larger bag, perfect for storage of phones, keys, wallet, camera, small tools, etc.

• Uses windshield mounting points for installation

Spot Light Kit

Enhances sight in low-light conditions with LED technology.

• Powerful spot light

• Easy installation with included hardware

• Easy installation using strong ThreeBond® adhesive for a permanent mount

• Powerful LED spot light with 18 LEDs

• Easy installation

• Ram mount with U bolt for rail mount included

• 12 volt output socket included

• Rubber ball absorbs shock and vibration

• Easily detachable from ram mount

• Weather-resistant rubber body shield

• On/off switch on the light

• Length of power cord is 125 cm-175 cm

• 30 degrees beam

• Frosted lens

• 9 watts

• 1900 lumens

• 4500K colour temp

Engine Stop Tether

Stay safe and prevent unfortunate events. This kit stops the engine In the event of getting separated from your snowmobile.

• End of the tether attaches to a jacket’s D-ring

Part numbers

SMA-8LR21-00-BK Black

Windshield Pack

Perfect for mountain and backcountry riders, this pack does double duty as both a sleek windshield and convenient storage for your unit.

• Semi-rigid construction

• Water-resistant

• Large zipper pull tabs easy to open and close with gloves on

Part numbers

ABA-2HR35-10-00 Black

Part numbers

SMA-8MS81-00-00 Red

Part numbers

SMA-8MS21-00-BK Black

Low Sport Windshield – Blue

Improved protection compared with stock windshield.

• Yamaha Racing Blue

• 37.5 cm tall

Medium Windshield

Adds both style and function while offering up even more wind protection for those especially cold days on the trail. Gives a custom look to the front profile of the snowmobile.

• Height is 18.5”

• Made of clear polycarbonate

• Pre-marked for accessory mirrors SMA8LJ26-00-00 sold seperately

Tall windshield

Higher screen to replace standard screen, providing enhanced wind protection especially for those cold days on the trail.

• Adding a custom look to the front profile

• Clear coloured, polycarbonate screen

• Screen height is 19,25inch

Part numbers

SMA-8MY96-11-BL Blue

Part numbers

SMA-8JP96-20-00 Transparent

SMA-8JP96-20-SM Smoke

Part numbers

8MH-K7210-00-00 Transparent

Extreme Low Windshield

For an upgraded look this stylish windshield fits the bill.

• Height is 6.5”

• Transparent

Part numbers

SMA-8JP96-00-BK Black

SMA-8JP96-00-RD Red

Mountain Max LE 154 SL Mountain

Tall Windshield

Higher screen to replace standard screen, providing enhanced wind and snow protection especially for those cold days on the trail.

• Clear coloured, polycarbonate screen

• Perfect for taller riders or those who prefer a more upright riding position

• Screen height is 27.2inch

Low Sport Windshield

Provide’s improved protection over stock. Adds a splash of colour with racing inspired graphics.

• Height is 14.75”

Part numbers

SMA-8JP96-30-00 Transparent

Part numbers

SMA-8JP96-11-BL Blue

SMA-8JP96-11-RD Red

SMA-8JP96-11-BK Black

Medium Sport Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail.

• Customize the look of your snowmobile

• Made of smoked polycarbonate

• Pre-marked for the optional mirrors

• 16.5” in size

Low Windshield

Aerodynamic, low profile windscreen complements the aggressive profile of the snowmobile’s front end.

• Made of smoked polycarbonate

• 10.25” in size

Part numbers

SMA-8LR96-21-SM Smoke

Part numbers

SMA-8LR96-10-SM Smoke

Medium Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail..

• Made of clear polycarbonate

• Customize the look of your snowmobile

• 18.5” in size

• Pre-marked for the optional mirrors

Tall Smoked Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail.

• Customize the look of your snowmobile

• Made of smoked polycarbonate

• 19.25” in size

Part numbers

SMA-8LR96-30-SM Smoke

Performance Grips

Slim and comfortable grip design offers better shock absorption.

• Sold in pairs

• Thinner material allows for more effective heat transfer from hand warmer elements

Part numbers

SMA-8LR96-20-SM Smoke

Custom Cover for SRViper M-TX

Protects unit during trailering or storage

• Cotton canvas is naturally very soft on the finish of the unit

• Vents moisture away

• Expandable windshield panel for accommodating taller accessory windshields

• Add Undercover Protector to protect windshield and shroud area, sold separately

• Strong, preshrunk, waterproof two-ply army duck canvas

Part numbers

SMA-8JP61-00-BK Black

Part numbers

SMA-COVER-88-00 Black

Super Sport Caddy Set

Caddy Set to move around easily your snowmobile.

• Constructed of lightweight, reinforced, multi-ribbed, injection-molded plastic

• Features twin wheel casters for greater stability

• Equipped with non-slip Hydro Turf® inserts

Metric Tool Kit

Comprehensive tool set that prepares you for just about anything the road will throw at you.

• Includes ring and open end combination spanners 8, 10, 12 & 14, an adjustable spanner, Vice Grips, 4 way Phillips and flat screwdrivers, sparkplug spanner and gap guage

• Includes also a roll of black electrical tape, tyre pressure gauge, cable ties, wire, rag and #3, 4, 5 & 6 Allen keys

• Comes in a compact roll-up pouch

• Can easily be stowed away in your saddlebag, side case, top case, etc.

Snowmobile Storage Cover

Protects your unit from the elements during trailering or storage. The back is coated with urethane to provide an excellent barrier to the elements and road grime. It includes soft, sewn in polyester undercover that helps protect your unit’s finish while storing and transporting. It has an expandable windshield panel that will accommodate the taller accessory windscreens

• Made of premium, UV resistant Polyester

• Matches the graphics on the Mountain Max

Yamaha Cam Buckle Tie-downs

Strong and durable straps to tie your Yamaha or any other big object down tightly when transporting it in a van or trailer.

• Ease of operation; simple tensioning and one finger release

• Built-in soft hook on the fixed end for looping around handlebars, frame tubes, triple-tree clamps and other structural parts

• Zinc cam buckle is made with a pressure plate to reduce webbing abrasion

• Features the Yamaha logo at intervals

• Assembly strength: 540kg (1,200lb)

• Working load limit: 180kg (400lb)

• Sold per set of two

Part numbers

SMA-CADDY-SC-BL Blue

Part numbers

ABA-METRC-00-00 Black

Part numbers

SMA-8NS30-LE-00 Blue

Part numbers

ACC-0SS58-40-28 Blue

Snowmobile High-Performance Suspension Grease.

The best snowmobile grease for usage on advanced suspension systems, when needing to react quickly to rough trail conditions.

• Provides extensive protection and wear resistance

• Low temperature protection down to -65°F and yet protection up to 250°F

• Product should be used where service manual indicates ESSO Beacon 325 or Aeroshell Grease

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With EU-plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety: spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Part numbers

ACC-SMBGR-SE-14 Black

Part numbers

YME-YEC09-EU-20 Black

Part numbers

YME-YEC01-EU-00 Black

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With UK plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety; spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers to fit our range of motorcycles, scooters, ATV, SMB and other products

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Disclaimer

Applicable to UK markets only

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Woody’s® Trail Blazer IV™ Runner Set

These runners have six inches of 60° turning carbide. They are great choice if you are looking for overall improvement in safety and handling, or to replace your factory runner.

• Sold in pairs

• 6” of 60º carbide on a ½” diameter host bar

• Use with a studded or un-studded track

Part numbers

YME-YEC09-UK-00 Black

Part numbers

YME-YEC01-UK-00 Black

Part numbers

SMA-TYV48-80-00 Black

Sidewinder S-TX GT EPS

Combination Trunk Bag

Increase your luggage space with options to spare and plenty of compartments to keep all items well organized.

• Tunnel bag with saddlebags combination

• Multi-compartment design

• Durable, weather resistant nylon

• Will not work in combination with the optional Two-Up Seat

Saddle Bags

When you need to bring along extra gear for your ride, these saddle bags are essential.

• Large bags, one on each side of the seat/ tunnel

• Durable, weather-resistant 1000-denier nylon

• 800-denier nylon accent material

• Mounted to the tunnel and under the seat

• Set of two

Medium Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 18.8L (.665 cf ) capacity

Part numbers

SMA-8LR63-00-BK Black

Part numbers

SMA-8LR73-00-BK Black

Part numbers

SMA-8MB63-00-BK Black

Sidewinder S-TX GT EPS Trail

Large Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 21.8L (.77 cf ) capacity

Extra Large Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 22.9L (. 81 cf ) capacity

Handlebar Bag

Add some convenient storage to your snowmobile with this multi-compartment bag. Mounts using both the handlebar and handlebar risers.

• Made of durable, weather resistant nylon.

Part numbers

SMA-8MB64-00-BK Black

M-TX Tunnel gear bag

Simple water-resistant moulded top tunnel pack perfect for the mountains.

• Mounts with quick attach straps to the rear grab bar

Part numbers

SMA-8MB65-00-BK Black

Part numbers

SMA-8LY43-00-00 Black

Part numbers

SMA-8KG63-00-00 Black

Billet Suspension Adjustment Blocks

The suspension block helps you achieve the ride quality that you want by allowing custom tuning of your rear suspension to 4 levels of spring preload.

• Made from solid billet aluminum.

• Anodized for long life.

• Sold in pairs

Billet Fuel Cap

For those who pay attention to the finer details of their sled, this stylish cap replaces stock for a more custom look.

• Made of billet aluminium

• Clean design with a Laser-Etched Tuning Fork logo

Part numbers

SMA-8JP39-BL-10 Black

Overload Spring Kit

Upgrade your suspension with overload springs..

• Recommended for loads exceeding 130 kg.

Part numbers

SMA-8MY67-00-RD Red

SMA-8MY67-00-BL Blue

SMA-8MY67-00-BK Black

Part numbers

SMA-8LN35-01-00 Black

Stryke Ski Kit

Offers a perfect balance between lightweight steering effort and precision handling over a wide range of snow conditions.

• Kit includes two skis complete with handles and four ski shims.

• Additional Ski loop colours available separately

• Carbides and Mounting hardware sold separately

• For added adjustment, various Styke Ski Shim Kit are separately

• Uses stock hardware.

• Sold individually.

Part numbers

8MA-F3712-10-00 Silver

8MA-F3712-20-00 Blue

8MA-F3712-30-00 Orange

8MA-F3712-40-00 Black

8MA-F3712-60-00 Blue

Required parts

SMA-STRYK-BL-WH Stryke Ski Kit

Sidewinder

Stryke Ski Kit

Offers a perfect balance between lightweight steering effort and precision handling over a wide range of snow conditions.

• Kit includes two skis complete with handles and four ski shims.

• Additional Ski loop colours available separately

• Carbides and Mounting hardware sold separately

• For added adjustment, various Styke Ski Shim Kit are separately

Stryke Ski Kit

Offers a perfect balance between lightweight steering effort and precision handling over a wide range of snow conditions.

• Kit includes two skis complete with handles and four ski shims.

• Additional Ski loop colours available separately

• Carbides and Mounting hardware sold separately

• For added adjustment, various Styke Ski Shim Kit are separately

Woody’s® 6” Ace Runner Set

This carbide runner is the tallest in the industry and has a narrow, rectangular profile for aggressive turning capabilities. Its 60° turning carbide (available in 6” & 8”) has been strategically placed to protect the runner and reduce darting by carving through existing grooves. Works great on Crossovers and in deep snow.

• Sold in pairs

• 6” of 60° turning carbide on a tall, square host bar

Woody’s® 8” Ace Runner Set for the Sidewinder

This carbide runner is the tallest in the industry and has a narrow, rectangular profile for aggressive turning capabilities. Its 60° turning carbide (available in 6” & 8”) has been strategically placed to protect the runner and reduce darting by carving through existing grooves. Works great on Crossovers and in deep snow.

• Sold in pairs

• 8” of 60° turning carbide on a tall, square host bar

Part numbers

SMA-STRYK-BL-WH Blue

SMA-STRYK-RD-WH Red

SMA-STRYK-BK-WH Black

Required parts

8MA-F3712-10-00 Stryke Ski Kit

Part numbers

SMA-SHIMS-KT-00 Black

Required parts

SMA-STRYK-BL-WH Stryke Ski Kit

Part numbers

SMA-AY688-00-00 Black

Part numbers

SMA-AY888-00-00 Black

Ice Scratchers

Helps prevent slide runner wear when on ice and hard pack snow.

• Rests on top of the slide rail when not in use or when backing up

• Not meant to use in reverse

• Sold in pairs

Part numbers

SMA-8JP38-00-KT Black

DuPont Slides 174”

Perfect for everyday riding on the trails or in the mountains. Reduces the friction and protects the aluminum rails from track wear.

• DuPont Vespel® material inserts

• Space-age polymer / composite material

• 15T scale Rockwell hardness of about 80 (UHMW slide runner hardness rating is about R64)

• Capable of withstanding extreme friction and heat environments

• Pieces are placed at a 30-degree angle across the entire slider for constant contact and even wear

• Made using compression moulding process

• Partially made with current UHMW plastic slide runner material

• Sold Individually

Rear Grab Bar & Hitch Kit

Strong, secure steel grab bar with pivotstyle hitch.

• Required for mounting the optional Tunnel Rack and optional Two-Up Seat

• Includes all necessary hardware

• 4 or 8 mounting pockets

Part numbers

SMA-DPSSV-MT-00 Black

Scorchers™ Ice Scratchers

The kit lubricates the hyfax and assists cooling when riding on hard-packed trails or frozen lakes. The scratchers are constructed of eat-treated, heavy-duty steel springs. It also includes anodized CNC machined aircraft aluminum washers to ensure durability and high performance. Can be used with or without idler wheels.

• Stows away to a nested position when not in use

• Drilling may be required

Part numbers

SMA-8MF41-00-00 Black

Part numbers

SMA-ICESC-BK-00 Black

Sidewinder S-TX GT EPS Trail

TRIC™ Ice Scratchers

The kit provides additional snow spray in hard-packed icy conditions to help reduce rear suspension hyfax wear and engine overheating. It creates a steady stream of ice crystals to provide both lubrication for the rear skid frame and additional cooling to the heat exchangers on liquid-cooled machines. Features stainless steel cables and adapters which can be rotated to allow for left or right applications. Also includes stainless steel hardware with universal mounting brackets.

• Includes 1/4” threaded replaceable carbide stud

• Allows operation of the reverse gear

• Sold in pairs

TRIC™ Ice Scratchers - Replacement Studs

The kit contains replacement studs for the TRIC™ Ice Scratchers.

• Uses common 1/4” thread

Part numbers

SMA-ICESC-02-ST Blue

Mounting kit for Windshield Mirrors (Sidewinder and SRViper)

Mounting kit for Windshield Mirrors (Sidewinder and SRViper).Only compatible with SMA-8LR96-21-SM & SMA-8LR9630-SM.

• Mounts to outside of windshield

Part numbers

SMA-ICESC-CB-AP Aluminium

Part numbers

SMA-8LJMR-AD-KT Black

Optional parts

SMA-8LR96-21-SM Medium Sport Windshield

SMA-8LR96-30-SM Medium Windshield

Aluminium Front Grab Bar

Offers a solid grip and bold styling.

• Constructed of ultra-lightweight aluminium tubing

• 1,6kg weight

Part numbers

SMA-8MT55-00-BK Black

Trail Sidewinder S-TX GT EPS

Pro Skid Plate

Race-inspired design offers lightweight protection from stumps, rocks, ice chunks, and other trail debris that can damage the bottom of the snowmobile chassis.

• Durable UHMW construction

• Includes all mounting hardware

Part numbers

SMA-8LR34-00-BK Black

Console Knee Pads

Add comfort and extra grip for your knees while protecting your machine’s bodywork from scratching.

• Heavy-duty durable nylon material

• Mounts to snowmobile securely

• Sold in pairs

Part numbers

SMA-8LR24-00-BK Black

Snowmobile Handguards Mounts

Made of sturdy plastic, this mounting kit is necessary for the installation of the snowmobile handguards: SMA-8LYHG-00BK (sold separately)

• Sold in pairs

Part numbers

SMA-8LYMT-00-00 Black

Required parts

SMA-8LYHG-00-BK Snowmobile Handguards

Snowmobile Handguards

Stylised protection for your hands from the chilling winds

• Sold in pairs

• Requires Mounting Hardware: Part #SMA8LYMT-00-00 (sold separately)

Part numbers

SMA-8LYHG-00-BK Black

Required parts

SMA-8LYMT-00-00 Snowmobile Handguards Mounts

Sidewinder S-TX GT EPS Trail

Rear Trail Skid Plate

Provides full coverage protection for the clutch, exhaust and chain case components.

• 1/4” thick high molecular weight polyethylene

Part numbers

SMA-8LR34-RR-BK Black

Windshield Bag

Offers convenient, easy-access storage for all essentials you need to take out on the trails.

• Made of durable, weather resistant nylon with colored accents material

• Larger bag, perfect for storage of phones, keys, wallet, camera, small tools, etc.

• Uses windshield mounting points for installation

Spot Light Kit

Enhances sight in low-light conditions with LED technology.

• Powerful spot light

• Easy installation with included hardware

• Easy installation using strong ThreeBond® adhesive for a permanent mount

• Powerful LED spot light with 18 LEDs

• Easy installation

• Ram mount with U bolt for rail mount included

• 12 volt output socket included

• Rubber ball absorbs shock and vibration

• Easily detachable from ram mount

• Weather-resistant rubber body shield

• On/off switch on the light

• Length of power cord is 125 cm-175 cm

• 30 degrees beam

• Frosted lens

• 9 watts

• 1900 lumens

• 4500K colour temp

Low Sport Windscreen Red

For improved protection over the stock windscreen.

• 37.5 cm (14.75 inch) tall

• Yamaha Red

Part numbers

SMA-8LR21-00-BK Black

Part numbers

ABA-2HR35-10-00 Black

Part numbers

SMA-8MY96-11-RD Red

Trail Sidewinder S-TX GT EPS

Windshield Pack

Perfect for mountain and backcountry riders, this pack does double duty as both a sleek windshield and convenient storage for your unit.

• Semi-rigid construction

• Water-resistant

• Large zipper pull tabs easy to open and close with gloves on

Low Sport Windshield – Blue

Improved protection compared with stock windshield.

• Yamaha Racing Blue

• 37.5 cm tall

Tall windshield

Higher screen to replace standard screen, providing enhanced wind protection especially for those cold days on the trail.

• Adding a custom look to the front profile

• Clear coloured, polycarbonate screen

• Screen height is 19,25inch

Part numbers

SMA-8MS21-00-BK Black

Part numbers

SMA-8MY96-11-BL Blue

Part numbers

8MH-K7210-00-00 Transparent

Low Sport Windshield

Provide’s improved protection over stock. Adds a splash of colour with racing inspired graphics.

• Height is 14.75”

Part numbers

SMA-8JP96-11-BL Blue

SMA-8JP96-11-RD Red

SMA-8JP96-11-BK Black

Sidewinder S-TX GT EPS Trail

Medium Sport Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail.

• Customize the look of your snowmobile

• Made of smoked polycarbonate

• Pre-marked for the optional mirrors

• 16.5” in size

Low Windshield

Aerodynamic, low profile windscreen complements the aggressive profile of the snowmobile’s front end.

• Made of smoked polycarbonate

• 10.25” in size

Part numbers

SMA-8LR96-21-SM Smoke

Part numbers

SMA-8LR96-10-SM Smoke

Medium Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail..

• Made of clear polycarbonate

• Customize the look of your snowmobile

• 18.5” in size

• Pre-marked for the optional mirrors

Tall Smoked Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail.

• Customize the look of your snowmobile

• Made of smoked polycarbonate

• 19.25” in size

Part numbers

SMA-8LR96-30-SM Smoke

Part numbers

SMA-8LR96-20-SM Smoke

Performance Grips

Slim and comfortable grip design offers better shock absorption.

• Sold in pairs

• Thinner material allows for more effective heat transfer from hand warmer elements

Part numbers

SMA-8JP61-00-BK Black

Super Sport Caddy Set

Caddy Set to move around easily your snowmobile.

• Constructed of lightweight, reinforced, multi-ribbed, injection-molded plastic

• Features twin wheel casters for greater stability

• Equipped with non-slip Hydro Turf® inserts

Metric Tool Kit

Comprehensive tool set that prepares you for just about anything the road will throw at you.

• Includes ring and open end combination spanners 8, 10, 12 & 14, an adjustable spanner, Vice Grips, 4 way Phillips and flat screwdrivers, sparkplug spanner and gap guage

• Includes also a roll of black electrical tape, tyre pressure gauge, cable ties, wire, rag and #3, 4, 5 & 6 Allen keys

• Comes in a compact roll-up pouch

• Can easily be stowed away in your saddlebag, side case, top case, etc.

Custom Cover for the STX 146 GT

Protects your unit from the elements during trailing or storage. Does not cover the passenger’s seat backrest.

• Will vent the moisture away

• Soft on the finish of your unit

• Water resistant

• Two-ply army duck canvas

• Does not cover the passenger’s seat backrest

Part numbers

SMA-CADDY-SC-BL Blue

Part numbers

ABA-METRC-00-00 Black

Part numbers

SMA-8MJ29-00-00 Black

Sidewinder S-TX GT EPS Trail

Snowmobile High-Performance Suspension Grease.

The best snowmobile grease for usage on advanced suspension systems, when needing to react quickly to rough trail conditions.

• Provides extensive protection and wear resistance

• Low temperature protection down to -65°F and yet protection up to 250°F

• Product should be used where service manual indicates ESSO Beacon 325 or Aeroshell Grease

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With EU-plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety: spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Part numbers

ACC-SMBGR-SE-14 Black

Part numbers

YME-YEC09-EU-20 Black

Part numbers

YME-YEC01-EU-00 Black

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With UK plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety; spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers to fit our range of motorcycles, scooters, ATV, SMB and other products

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Disclaimer

Applicable to UK markets only

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Custom Storage Cover

Protects your unit from the elements during trailering or storage.

• Cotton canvas is naturally very soft on the finish of the unit

• An expandable windshield panel will accommodate the taller accessory windshields

• Military grade, water and mildew resistant material

Part numbers

YME-YEC09-UK-00 Black

Part numbers

YME-YEC01-UK-00 Black

Part numbers

SMA-8MR29-00-00 Black

Sidewinder S-TX GT EPS Trail

Custom Snowmobile Cover

This Custom Snowmobile Cover protects your unit from the elements during trailing or storage.Made of strong, preshrunk, two-ply army duck canvas that’s been specially finished to resist water and mildew.The cotton canvas is, naturally, very soft on the finish of your snowmobile and conforms like a pair of jeans. Additionally, it includes sewn-in soft undercover to protect even better, your sled’s finish.

• This material vents moisture better than other material

• Covers features Yamaha Genuine graphics

Part numbers

SMA-8MU30-00-00 Black

Woody’s®

Trail Blazer IV™ Runner Set

These runners have six inches of 60° turning carbide. They are great choice if you are looking for overall improvement in safety and handling, or to replace your factory runner.

• Sold in pairs

• 6” of 60º carbide on a ½” diameter host bar

• Use with a studded or un-studded track

Pintle Hitch Kit

Designed for towing other objects or to pull the kids around the yard in a sled.

• Durable steel construction

• Fits stock grab bar

Part numbers

SMA-TYV48-80-00 Black

Part numbers

SMA-8LN79-10-00 Black

Transporter Lite 2UP Trail

Handlebar Bag

Add some convenient storage to your snowmobile with this multi-compartment bag. Mounts using both the handlebar and handlebar risers.

• Made of durable, weather resistant nylon.

Part numbers

SMA-8LY43-00-00 Black

Tunnel Bag

Tunnel Bag mounts to the tunnel of your snowmobile for added storage and a sleek look to match your sledge.

• Easy installation

Part numbers

SMA-8NT63-00-00 Black

Windshield Bag

Perfect for phones, keys, wallet, camera, small tools, etc.

• Convenient, easy-access storage for smaller items

• Durable, weather-resistant nylon

• Uses windshield screws for mounting

Part numbers

SMA-8NT21-00-00 Black

Spoked Rear Axle Guide Wheel

Add some style and color to your snowmobile!

• Sold in pairs

• Bearing is included

• Made out of resistant plastic

• 178mm in size

Part numbers

SMA-8HF38-02-BK Black

TRIC™ Ice Scratchers

The kit provides additional snow spray in hard-packed icy conditions to help reduce rear suspension hyfax wear and engine overheating. It creates a steady stream of ice crystals to provide both lubrication for the rear skid frame and additional cooling to the heat exchangers on liquid-cooled machines. Features stainless steel cables and adapters which can be rotated to allow for left or right applications. Also includes stainless steel hardware with universal mounting brackets.

• Includes 1/4” threaded replaceable carbide stud

• Allows operation of the reverse gear

• Sold in pairs

TRIC™ Ice Scratchers - Replacement Studs

The kit contains replacement studs for the TRIC™ Ice Scratchers.

• Uses common 1/4” thread

Part numbers

SMA-ICESC-02-ST Blue

Spoked Idler Bogey Wheel

Add some style and color to your snowmobile!

• Sold Individually

• Made out of resistant plastic

• 130mm in size

• Includes mounting materials

Part numbers

SMA-ICESC-CB-AP Aluminium

Part numbers

SMA-8HF38-01-BK Black

Trail Transporter Lite 2UP

Snowmobile Handguards Mounts

Made of sturdy plastic, this mounting kit is necessary for the installation of the snowmobile handguards: SMA-8LYHG-00BK (sold separately)

• Sold in pairs

Part numbers

SMA-8LYMT-00-00 Black

Required parts

SMA-8LYHG-00-BK Snowmobile Handguards

Snowmobile Handguards

Stylised protection for your hands from the chilling winds

• Sold in pairs

• Requires Mounting Hardware: Part #SMA8LYMT-00-00 (sold separately)

Part numbers

SMA-8LYHG-00-BK Black

Required parts

SMA-8LYMT-00-00 Snowmobile Handguards Mounts

Hand Guard Wind Covers

These Hand Guard Wind Covers offer additional wind protection and good looks for your snowmobile.

• Semi-rigid design, black color

• Can be installed directly onto your bare handlebars

• Features Yamaha logo

Trailerable Cover

Protects unit during trailering and storage.

• Strong, pre-shrunk, two-ply army duck canvas resists water and mildew

• Soft, cotton canvas conforms to the unit while keeping moisture away

Part numbers

SMA-09HGC-BK-00 Black

Part numbers

SMA-8NU29-00-00 Black

Transporter Lite 2UP Trail

Rear Skid Plate

The Rear Skid Plate gives full coverage protection for your clutch, exhaust, and chain case components.

• May not be exactly as shown in the photo.

Part numbers

SMA-8NU34-00-00 Black

Spot Light Kit

Enhances sight in low-light conditions with LED technology.

• Powerful spot light

• Easy installation with included hardware

• Easy installation using strong ThreeBond® adhesive for a permanent mount

• Powerful LED spot light with 18 LEDs

• Easy installation

• Ram mount with U bolt for rail mount included

• 12 volt output socket included

• Rubber ball absorbs shock and vibration

• Easily detachable from ram mount

• Weather-resistant rubber body shield

• On/off switch on the light

• Length of power cord is 125 cm-175 cm

• 30 degrees beam

• Frosted lens

• 9 watts

• 1900 lumens

• 4500K colour temp

12V DC Plug

Allows power take off for 12V electrical accessories.

• Corrosion resistant and marine grade construction

• Patented moisture resistant sealing ring

• LED indicator light

• Internal 10A fuse

2UP Seat Kit

Convert your snowmobile to allow you to carry a passenger.

• Matches the unit design.

Part numbers

ABA-2HR35-10-00 Black

Optional parts

ATV-12VPK-00-KT 12V DC Plug

Part numbers

ATV-12VPK-00-KT Black

Required parts

ABA-2HR35-10-00 Spot Light Kit

Optional parts

ABA-2HR35-10-00 Spot Light Kit

Part numbers

SMA-8NU49-00-00 Black

Trail Transporter Lite 2UP

2UP Transporter Lite Cover

The cover protects your unit from the elements during trailering or storage. Back-coated with urethane, it provides an excellent barrier to the elements and road grime.

• Made of premium SurLast® polyester fabric, which is very UV, and colour stable.

• Has an expandable windshield panel which will accommodate the taller accessory windshields.

• May not be exactly as shown on the picture.

Snowmobile High-Performance Suspension Grease. The best snowmobile grease for usage on advanced suspension systems, when needing to react quickly to rough trail conditions.

• Provides extensive protection and wear resistance

• Low temperature protection down to -65°F and yet protection up to 250°F

• Product should be used where service manual indicates ESSO Beacon 325 or Aeroshell Grease

Super Sport Caddy Set

Caddy Set to move around easily your snowmobile.

• Constructed of lightweight, reinforced, multi-ribbed, injection-molded plastic

• Features twin wheel casters for greater stability

• Equipped with non-slip Hydro Turf® inserts

Metric Tool Kit

Comprehensive tool set that prepares you for just about anything the road will throw at you.

• Includes ring and open end combination spanners 8, 10, 12 & 14, an adjustable spanner, Vice Grips, 4 way Phillips and flat screwdrivers, sparkplug spanner and gap guage

• Includes also a roll of black electrical tape, tyre pressure gauge, cable ties, wire, rag and #3, 4, 5 & 6 Allen keys

• Comes in a compact roll-up pouch

• Can easily be stowed away in your saddlebag, side case, top case, etc.

Part numbers

SMA-8NX29-00-00 Black

Part numbers

ACC-SMBGR-SE-14 Black

Part numbers

SMA-CADDY-SC-BL Blue

Part numbers

ABA-METRC-00-00 Black

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With EU-plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety: spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Part numbers

YME-YEC09-EU-20 Black

Part numbers

YME-YEC01-EU-00 Black

Trail Transporter Lite 2UP

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With UK plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety; spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers to fit our range of motorcycles, scooters, ATV, SMB and other products

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Disclaimer

Applicable to UK markets only

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Part numbers

YME-YEC09-UK-00 Black

Part numbers

YME-YEC01-UK-00 Black

Sidewinder SRX LE

Combination Trunk Bag

Increase your luggage space with options to spare and plenty of compartments to keep all items well organized.

• Tunnel bag with saddlebags combination

• Multi-compartment design

• Durable, weather resistant nylon

• Will not work in combination with the optional Two-Up Seat

Saddle Bags

When you need to bring along extra gear for your ride, these saddle bags are essential.

• Large bags, one on each side of the seat/ tunnel

• Durable, weather-resistant 1000-denier nylon

• 800-denier nylon accent material

• Mounted to the tunnel and under the seat

• Set of two

Medium Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 18.8L (.665 cf ) capacity

Part numbers

SMA-8LR63-00-BK Black

Part numbers

SMA-8LR73-00-BK Black

Part numbers

SMA-8MB63-00-BK Black

Large Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 21.8L (.77 cf ) capacity

Extra Large Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 22.9L (. 81 cf ) capacity

Handlebar Bag

Add some convenient storage to your snowmobile with this multi-compartment bag. Mounts using both the handlebar and handlebar risers.

• Made of durable, weather resistant nylon.

Part numbers

SMA-8MB64-00-BK Black

M-TX Tunnel gear bag

Simple water-resistant moulded top tunnel pack perfect for the mountains.

• Mounts with quick attach straps to the rear grab bar

Part numbers

SMA-8MB65-00-BK Black

Part numbers

SMA-8LY43-00-00 Black

Part numbers

SMA-8KG63-00-00 Black

Billet Suspension Adjustment Blocks

The suspension block helps you achieve the ride quality that you want by allowing custom tuning of your rear suspension to 4 levels of spring preload.

• Made from solid billet aluminum.

• Anodized for long life.

• Sold in pairs

Overload Spring Kit

Upgrade your suspension with overload springs..

• Recommended for loads exceeding 130 kg.

Part numbers

SMA-8JP39-BL-10 Black

Part numbers

SMA-8LN35-01-00 Black

Stryke Ski Kit

Offers a perfect balance between lightweight steering effort and precision handling over a wide range of snow conditions.

• Kit includes two skis complete with handles and four ski shims.

• Additional Ski loop colours available separately

• Carbides and Mounting hardware sold separately

• For added adjustment, various Styke Ski Shim Kit are separately

• Uses stock hardware.

• Sold individually.

Woody’s® 6” Ace Runner Set

This carbide runner is the tallest in the industry and has a narrow, rectangular profile for aggressive turning capabilities. Its 60° turning carbide (available in 6” & 8”) has been strategically placed to protect the runner and reduce darting by carving through existing grooves. Works great on Crossovers and in deep snow.

• Sold in pairs

• 6” of 60° turning carbide on a tall, square host bar

Part numbers

8MA-F3712-10-00 Silver

8MA-F3712-20-00 Blue

8MA-F3712-30-00 Orange

8MA-F3712-40-00 Black

8MA-F3712-60-00 Blue

Part numbers

SMA-AY688-00-00 Black

Woody’s® 8” Ace Runner Set for the Sidewinder

This carbide runner is the tallest in the industry and has a narrow, rectangular profile for aggressive turning capabilities. Its 60° turning carbide (available in 6” & 8”) has been strategically placed to protect the runner and reduce darting by carving through existing grooves. Works great on Crossovers and in deep snow.

• Sold in pairs

• 8” of 60° turning carbide on a tall, square host bar

Ice Scratchers

Helps prevent slide runner wear when on ice and hard pack snow.

• Rests on top of the slide rail when not in use or when backing up

• Not meant to use in reverse

• Sold in pairs

Part numbers

SMA-AY888-00-00 Black

Part numbers

SMA-8JP38-00-KT Black

DuPont Slides 174”

Perfect for everyday riding on the trails or in the mountains. Reduces the friction and protects the aluminum rails from track wear.

• DuPont Vespel® material inserts

• Space-age polymer / composite material

• 15T scale Rockwell hardness of about 80 (UHMW slide runner hardness rating is about R64)

• Capable of withstanding extreme friction and heat environments

• Pieces are placed at a 30-degree angle across the entire slider for constant contact and even wear

• Made using compression moulding process

• Partially made with current UHMW plastic slide runner material

• Sold Individually

Rear Grab Bar & Hitch Kit

Strong, secure steel grab bar with pivotstyle hitch.

• Required for mounting the optional Tunnel Rack and optional Two-Up Seat

• Includes all necessary hardware

• 4 or 8 mounting pockets

Part numbers

SMA-DPSSV-MT-00 Black

Part numbers

SMA-8MF41-00-00 Black

Scorchers™ Ice Scratchers

The kit lubricates the hyfax and assists cooling when riding on hard-packed trails or frozen lakes. The scratchers are constructed of eat-treated, heavy-duty steel springs. It also includes anodized CNC machined aircraft aluminum washers to ensure durability and high performance. Can be used with or without idler wheels.

• Stows away to a nested position when not in use

• Drilling may be required

TRIC™ Ice Scratchers

The kit provides additional snow spray in hard-packed icy conditions to help reduce rear suspension hyfax wear and engine overheating. It creates a steady stream of ice crystals to provide both lubrication for the rear skid frame and additional cooling to the heat exchangers on liquid-cooled machines. Features stainless steel cables and adapters which can be rotated to allow for left or right applications. Also includes stainless steel hardware with universal mounting brackets.

• Includes 1/4” threaded replaceable carbide stud

• Allows operation of the reverse gear

• Sold in pairs

TRIC™ Ice Scratchers - Replacement Studs

The kit contains replacement studs for the TRIC™ Ice Scratchers.

• Uses common 1/4” thread

Part numbers

SMA-ICESC-BK-00 Black

Part numbers

SMA-ICESC-02-ST Blue

Mounting kit for Windshield Mirrors (Sidewinder and SRViper)

Mounting kit for Windshield Mirrors (Sidewinder and SRViper).Only compatible with SMA-8LR96-21-SM & SMA-8LR9630-SM.

• Mounts to outside of windshield

Part numbers

SMA-ICESC-CB-AP Aluminium

Part numbers

SMA-8LJMR-AD-KT Black

Optional parts

SMA-8LR96-21-SM Medium Sport Windshield

SMA-8LR96-30-SM Medium Windshield

Trail Sidewinder SRX LE

Aluminium Front Grab Bar

Offers a solid grip and bold styling.

• Constructed of ultra-lightweight aluminium tubing

• 1,6kg weight

Part numbers

SMA-8MT55-00-BK Black

Pro Skid Plate

Race-inspired design offers lightweight protection from stumps, rocks, ice chunks, and other trail debris that can damage the bottom of the snowmobile chassis.

• Durable UHMW construction

• Includes all mounting hardware

Part numbers

SMA-8LR34-00-BK Black

Console Knee Pads

Add comfort and extra grip for your knees while protecting your machine’s bodywork from scratching.

• Heavy-duty durable nylon material

• Mounts to snowmobile securely

• Sold in pairs

Part numbers

SMA-8LR24-00-BK Black

Snowmobile Handguards Mounts

Made of sturdy plastic, this mounting kit is necessary for the installation of the snowmobile handguards: SMA-8LYHG-00BK (sold separately)

• Sold in pairs

Part numbers

SMA-8LYMT-00-00 Black

Required parts

SMA-8LYHG-00-BK Snowmobile Handguards

Sidewinder SRX LE Trail

Snowmobile Handguards

Stylised protection for your hands from the chilling winds

• Sold in pairs

• Requires Mounting Hardware: Part #SMA8LYMT-00-00 (sold separately)

Part numbers

SMA-8LYHG-00-BK Black

Required parts

SMA-8LYMT-00-00 Snowmobile Handguards Mounts

Rear Trail Skid Plate

Provides full coverage protection for the clutch, exhaust and chain case components.

• 1/4” thick high molecular weight polyethylene

Part numbers

SMA-8LR34-RR-BK Black

SMA-8LR21-00-BK Black Windshield Bag

Offers convenient, easy-access storage for all essentials you need to take out on the trails.

• Made of durable, weather resistant nylon with colored accents material

• Larger bag, perfect for storage of phones, keys, wallet, camera, small tools, etc.

• Uses windshield mounting points for installation

Spot Light Kit

Enhances sight in low-light conditions with LED technology.

• Powerful spot light

• Easy installation with included hardware

• Easy installation using strong ThreeBond® adhesive for a permanent mount

• Powerful LED spot light with 18 LEDs

• Easy installation

• Ram mount with U bolt for rail mount included

• 12 volt output socket included

• Rubber ball absorbs shock and vibration

• Easily detachable from ram mount

• Weather-resistant rubber body shield

• On/off switch on the light

• Length of power cord is 125 cm-175 cm

• 30 degrees beam

• Frosted lens

• 9 watts

• 1900 lumens

• 4500K colour temp

Part numbers

Part numbers

ABA-2HR35-10-00 Black

Trail Sidewinder SRX LE

Windshield Pack

Perfect for mountain and backcountry riders, this pack does double duty as both a sleek windshield and convenient storage for your unit.

• Semi-rigid construction

• Water-resistant

• Large zipper pull tabs easy to open and close with gloves on

Low Sport Windshield – Blue

Improved protection compared with stock windshield.

• Yamaha Racing Blue

• 37.5 cm tall

Tall windshield

Higher screen to replace standard screen, providing enhanced wind protection especially for those cold days on the trail.

• Adding a custom look to the front profile

• Clear coloured, polycarbonate screen

• Screen height is 19,25inch

Part numbers

SMA-8MS21-00-BK Black

Part numbers

SMA-8MY96-11-BL Blue

Part numbers

8MH-K7210-00-00 Transparent

Low Sport Windshield

Provide’s improved protection over stock. Adds a splash of colour with racing inspired graphics.

• Height is 14.75”

Part numbers

SMA-8JP96-11-BL Blue

SMA-8JP96-11-RD Red

SMA-8JP96-11-BK Black

Sidewinder SRX LE Trail

Medium Sport Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail.

• Customize the look of your snowmobile

• Made of smoked polycarbonate

• Pre-marked for the optional mirrors

• 16.5” in size

Low Windshield

Aerodynamic, low profile windscreen complements the aggressive profile of the snowmobile’s front end.

• Made of smoked polycarbonate

• 10.25” in size

Part numbers

SMA-8LR96-21-SM Smoke

Part numbers

SMA-8LR96-10-SM Smoke

Medium Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail..

• Made of clear polycarbonate

• Customize the look of your snowmobile

• 18.5” in size

• Pre-marked for the optional mirrors

Tall Smoked Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail.

• Customize the look of your snowmobile

• Made of smoked polycarbonate

• 19.25” in size

Part numbers

SMA-8LR96-30-SM Smoke

Part numbers

SMA-8LR96-20-SM Smoke

Performance Grips

Slim and comfortable grip design offers better shock absorption.

• Sold in pairs

• Thinner material allows for more effective heat transfer from hand warmer elements

Part numbers

SMA-8JP61-00-BK Black

Super Sport Caddy Set

Caddy Set to move around easily your snowmobile.

• Constructed of lightweight, reinforced, multi-ribbed, injection-molded plastic

• Features twin wheel casters for greater stability

• Equipped with non-slip Hydro Turf® inserts

Metric Tool Kit

Comprehensive tool set that prepares you for just about anything the road will throw at you.

• Includes ring and open end combination spanners 8, 10, 12 & 14, an adjustable spanner, Vice Grips, 4 way Phillips and flat screwdrivers, sparkplug spanner and gap guage

• Includes also a roll of black electrical tape, tyre pressure gauge, cable ties, wire, rag and #3, 4, 5 & 6 Allen keys

• Comes in a compact roll-up pouch

• Can easily be stowed away in your saddlebag, side case, top case, etc.

Custom Cover for the STX 146 GT

Protects your unit from the elements during trailing or storage. Does not cover the passenger’s seat backrest.

• Will vent the moisture away

• Soft on the finish of your unit

• Water resistant

• Two-ply army duck canvas

• Does not cover the passenger’s seat backrest

Part numbers

SMA-CADDY-SC-BL Blue

Part numbers

ABA-METRC-00-00 Black

Part numbers

SMA-8MJ29-00-00 Black

Snowmobile High-Performance Suspension Grease.

The best snowmobile grease for usage on advanced suspension systems, when needing to react quickly to rough trail conditions.

• Provides extensive protection and wear resistance

• Low temperature protection down to -65°F and yet protection up to 250°F

• Product should be used where service manual indicates ESSO Beacon 325 or Aeroshell Grease

YEC-9

Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With EU-plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety: spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Part numbers

ACC-SMBGR-SE-14 Black

Part numbers

YME-YEC09-EU-20 Black

Part numbers

YME-YEC01-EU-00 Black

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With UK plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety; spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers to fit our range of motorcycles, scooters, ATV, SMB and other products

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Disclaimer

Applicable to UK markets only

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Custom Storage Cover

Protects your unit from the elements during trailering or storage.

• Cotton canvas is naturally very soft on the finish of the unit

• An expandable windshield panel will accommodate the taller accessory windshields

• Military grade, water and mildew resistant material

Part numbers

YME-YEC09-UK-00 Black

Part numbers

YME-YEC01-UK-00 Black

Part numbers

SMA-8MR29-00-00 Black

Sidewinder SRX LE Trail

Custom

Snowmobile Cover

This Custom Snowmobile Cover protects your unit from the elements during trailing or storage.Made of strong, preshrunk, two-ply army duck canvas that’s been specially finished to resist water and mildew.The cotton canvas is, naturally, very soft on the finish of your snowmobile and conforms like a pair of jeans. Additionally, it includes sewn-in soft undercover to protect even better, your sled’s finish.

• This material vents moisture better than other material

• Covers features Yamaha Genuine graphics

Part numbers

SMA-8MU30-00-00 Black

Woody’s®

Trail Blazer IV™ Runner Set

These runners have six inches of 60° turning carbide. They are great choice if you are looking for overall improvement in safety and handling, or to replace your factory runner.

• Sold in pairs

• 6” of 60º carbide on a ½” diameter host bar

• Use with a studded or un-studded track

Pintle Hitch Kit

Designed for towing other objects or to pull the kids around the yard in a sled.

• Durable steel construction

• Fits stock grab bar

Part numbers

SMA-TYV48-80-00 Black

Part numbers

SMA-8LN79-10-00 Black

SXVenom

Combination Trunk Bag

Increase your luggage space with options to spare and plenty of compartments to keep all items well organized.

• Tunnel bag with saddlebags combination

• Multi-compartment design

• Durable, weather resistant nylon

• Will not work in combination with the optional Two-Up Seat

Expandable Rack Pack

Perfect for when you need to bring that extra gear on your ride.

• Large capacity storage

• Quick-attach straps

• Fits in the Tunnel Rack, sold separately

Part numbers

SMA-8LR63-00-BK Black

Part numbers

SMA-8JY63-00-00 Black

Saddle Bags

When you need to bring along extra gear for your ride, these saddle bags are essential.

• Large bags, one on each side of the seat/ tunnel

• Durable, weather-resistant 1000-denier nylon

• 800-denier nylon accent material

• Mounted to the tunnel and under the seat

• Set of two

Part numbers

SMA-8LR73-00-BK Black

Medium Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 18.8L (.665 cf ) capacity

Large Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 21.8L (.77 cf ) capacity

Extra Large Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 22.9L (. 81 cf ) capacity

Part numbers

SMA-8MB63-00-BK Black

Part numbers

SMA-8MB64-00-BK Black

Part numbers

SMA-8MB65-00-BK Black

SMA-8LY43-00-00 Black Handlebar Bag

Add some convenient storage to your snowmobile with this multi-compartment bag. Mounts using both the handlebar and handlebar risers.

• Made of durable, weather resistant nylon.

Part numbers

Trail SXVenom

Handlebar Bag

Add some convenient storage to your snowmobile with this multi-compartment handlebar bag.

• Durable, weather-resistant nylon

• Accent material in 800-denier nylon

• Mounted by using both the handlebar and handlebar risers

Deluxe Tunnel Bag

Pack a snack and extra essentials for that long or short ride.

• Semi-rigid bag

• Easily removable

Part numbers

SMA-8JP43-01-00 Black

M-TX Tunnel gear bag

Simple water-resistant moulded top tunnel pack perfect for the mountains.

• Mounts with quick attach straps to the rear grab bar

Part numbers

SMA-8JX63-00-00 Black

Woody’s® Carbide Wear Bar Runners - Trailblazer Series

The Woody’s® Carbide Wear Bar Runners

- Trailblazer Series are designed for aggressive trail riders.

• Sold in pairs

• Carbide wear pads are a full 1½” long

• 6” of 60º carbide on a ½” diameter host bar

• Full length hard-weld between all three carbide inserts

Part numbers

SMA-8KG63-00-00 Black

Part numbers

SMA-TYV46-58-00 Black

Woody’s®

6” Ace Runner Set

This carbide runner is the tallest in the industry and has a narrow, rectangular profile for aggressive turning capabilities. Its 60° turning carbide (available in 6” & 8”) has been strategically placed to protect the runner and reduce darting by carving through existing grooves. Works great on Crossovers and in deep snow.

• Sold in pairs

• 6” of 60° turning carbide on a tall, square host bar

Part numbers

SMA-AY688-00-00 Black

Woody’s®

8” Ace Runner Set for the Sidewinder

This carbide runner is the tallest in the industry and has a narrow, rectangular profile for aggressive turning capabilities. Its 60° turning carbide (available in 6” & 8”) has been strategically placed to protect the runner and reduce darting by carving through existing grooves. Works great on Crossovers and in deep snow.

• Sold in pairs

• 8” of 60° turning carbide on a tall, square host bar

Rear Fourth Wheel Kit

Outside idler wheels help keep track in proper alignment and spreads load evenly across the entire track.

• Wheels

• Spacer blocks

• All necessary hardware

Part numbers

SMA-AY888-00-00 Black

Part numbers

SMA-8JY47-00-BK Black

Ice Scratchers

Helps prevent slide runner wear when on ice and hard pack snow.

• Rests on top of the slide rail when not in use or when backing up

• Not meant to use in reverse

• Sold in pairs

Part numbers

SMA-8JP38-00-KT Black

Trail SXVenom

Windshield Mirror Kit

Accentuates the sporty styling of your snowmobile, while keeping aware of your surroundings.

• Mounted to outside of windshield

• Can be combined with the optional Medium Sport Windshield and optional Medium Windshield

Part numbers

SMA-8LJ26-00-00 Black

Required parts

SMA-8LJMR-AD-KT Mounting kit for Windshield Mirrors (Sidewinder and SRViper)

SMA-8LR96-21-SM Medium Sport Windshield

SMA-8LR96-30-SM Medium Windshield

DuPont Slides 174”

Perfect for everyday riding on the trails or in the mountains. Reduces the friction and protects the aluminum rails from track wear.

• DuPont Vespel® material inserts

• Space-age polymer / composite material

• 15T scale Rockwell hardness of about 80 (UHMW slide runner hardness rating is about R64)

• Capable of withstanding extreme friction and heat environments

• Pieces are placed at a 30-degree angle across the entire slider for constant contact and even wear

• Made using compression moulding process

• Partially made with current UHMW plastic slide runner material

• Sold Individually

Console Knee Pads

Add comfort and extra grip for your knees.

• Mounting hardware included

Part numbers

SMA-DPSSV-MT-00 Black

Scorchers™ Ice Scratchers

The kit lubricates the hyfax and assists cooling when riding on hard-packed trails or frozen lakes. The scratchers are constructed of eat-treated, heavy-duty steel springs. It also includes anodized CNC machined aircraft aluminum washers to ensure durability and high performance. Can be used with or without idler wheels.

• Stows away to a nested position when not in use

• Drilling may be required

Part numbers

SMA-8JP24-00-WH Black

Part numbers

SMA-ICESC-BK-00 Black

TRIC™ Ice Scratchers

The kit provides additional snow spray in hard-packed icy conditions to help reduce rear suspension hyfax wear and engine overheating. It creates a steady stream of ice crystals to provide both lubrication for the rear skid frame and additional cooling to the heat exchangers on liquid-cooled machines. Features stainless steel cables and adapters which can be rotated to allow for left or right applications. Also includes stainless steel hardware with universal mounting brackets.

• Includes 1/4” threaded replaceable carbide stud

• Allows operation of the reverse gear

• Sold in pairs

TRIC™ Ice Scratchers - Replacement Studs

The kit contains replacement studs for the TRIC™ Ice Scratchers.

• Uses common 1/4” thread

Part numbers

SMA-ICESC-02-ST Blue

Mounting kit for Windshield Mirrors (Sidewinder and SRViper)

Mounting kit for Windshield Mirrors (Sidewinder and SRViper).Only compatible with SMA-8LR96-21-SM & SMA-8LR9630-SM.

• Mounts to outside of windshield

Part numbers

SMA-ICESC-CB-AP Aluminium

Front Skid Plate

Improves approach angle and protects the nose cone from damage by stumps, rocks, ice chunks and other debris.

• Can be combined with the optional Rear Skid Plate

• Will not work in conbination with Sport Front Grab Bar

Part numbers

SMA-8LJMR-AD-KT Black

Optional parts

SMA-8LR96-21-SM Medium Sport Windshield

SMA-8LR96-30-SM Medium Windshield

Part numbers

SMA-8JP34-FR-BK Black

Trail SXVenom

Floatation skid plate

Adds the maximum amount of protection and additional flotation, helping the snowmobile float through the powder.

• Does not fit up with optional accessory front bumpers

• Durable UHMW construction

• Incompatible with optional accessory front bumpers

• Mounting kit included

Rail Brace Kit

Designed with the hard-core riders in mind, these aluminium braces add strength to the stock rails.

• Only 3,4 [kg] per kit

• Easy, bolt-on installation

Part numbers

SMA-8KC34-00-BK Black

Part numbers

SMA-8MS60-BK-00 Black

Deluxe Heated Shield Outlet

Add a heated shield outlet to your snowmobile

• Dash mounted

• Equipped with cover to protect plug from ice and snow

• Simple installation with factory accessory pig-tail

Console Knee Pads

Add comfort and extra grip for your knees while protecting your machine’s bodywork from scratching.

• Heavy-duty durable nylon material

• Mounts to snowmobile securely

• Sold in pairs

Part numbers

SMA-8LR10-00-00 Black

Part numbers

SMA-8LR24-00-BK Black

Snowmobile Handguards Mounts

Made of sturdy plastic, this mounting kit is necessary for the installation of the snowmobile handguards: SMA-8LYHG-00BK (sold separately)

• Sold in pairs

Part numbers

SMA-8LYMT-00-00 Black

Required parts

SMA-8LYHG-00-BK Snowmobile Handguards

Colored Snow Flap

Add some style and flair by simply replacing the stock flap on your snowmobile.

• Sold Individually

• The Snow Flaps come in three colours

• Easy installation

• Mounting hardware is included

Snowmobile Handguards

Stylised protection for your hands from the chilling winds

• Sold in pairs

• Requires Mounting Hardware: Part #SMA8LYMT-00-00 (sold separately)

Part numbers

SMA-8JP77-59-BL Blue

SMA-8JP77-59-BK Black

SMA-8JP77-59-RD Red

Part numbers

SMA-8LYHG-00-BK Black

Required parts

SMA-8LYMT-00-00 Snowmobile Handguards Mounts

Switch Guards

Helps prevent accidental shut off of control switches.

• Hand/thumb warmer guard

• Stop switch guard

• Adhesive backing

Part numbers

SMA-8KG86-00-00 Black

Rear Skid Plate

The Rear Skid Plate gives full coverage protection for your clutch, exhaust, and chain case components.

• May not be exactly as shown in the photo.

Part numbers

SMA-8NU34-00-00 Black

Windshield Bag

Offers convenient, easy-access storage for all essentials you need to take out on the trails.

• Made of durable, weather resistant nylon with colored accents material

• Larger bag, perfect for storage of phones, keys, wallet, camera, small tools, etc.

• Uses windshield mounting points for installation

Spot Light Kit

Enhances sight in low-light conditions with LED technology.

• Powerful spot light

• Easy installation with included hardware

• Easy installation using strong ThreeBond® adhesive for a permanent mount

• Powerful LED spot light with 18 LEDs

• Easy installation

• Ram mount with U bolt for rail mount included

• 12 volt output socket included

• Rubber ball absorbs shock and vibration

• Easily detachable from ram mount

• Weather-resistant rubber body shield

• On/off switch on the light

• Length of power cord is 125 cm-175 cm

• 30 degrees beam

• Frosted lens

• 9 watts

• 1900 lumens

• 4500K colour temp

Engine Stop Tether

Stay safe and prevent unfortunate events. This kit stops the engine In the event of getting separated from your snowmobile.

• End of the tether attaches to a jacket’s D-ring

Part numbers

SMA-8LR21-00-BK Black

Part numbers

ABA-2HR35-10-00 Black

Part numbers

SMA-8MS81-00-00 Red

Windshield Pack

Perfect for mountain and backcountry riders, this pack does double duty as both a sleek windshield and convenient storage for your unit.

• Semi-rigid construction

• Water-resistant

• Large zipper pull tabs easy to open and close with gloves on

Low Sport Windshield – Blue

Improved protection compared with stock windshield.

• Yamaha Racing Blue

• 37.5 cm tall

Medium Windshield

Adds both style and function while offering up even more wind protection for those especially cold days on the trail. Gives a custom look to the front profile of the snowmobile.

• Height is 18.5”

• Made of clear polycarbonate

• Pre-marked for accessory mirrors SMA8LJ26-00-00 sold seperately

Tall windshield

Higher screen to replace standard screen, providing enhanced wind protection especially for those cold days on the trail.

• Adding a custom look to the front profile

• Clear coloured, polycarbonate screen

• Screen height is 19,25inch

Part numbers

SMA-8MS21-00-BK Black

Part numbers

SMA-8MY96-11-BL Blue

Part numbers

SMA-8JP96-20-00

Transparent

SMA-8JP96-20-SM Smoke

Part numbers

8MH-K7210-00-00

Transparent

Trail SXVenom

Extreme Low Windshield

For an upgraded look this stylish windshield fits the bill.

• Height is 6.5”

• Transparent

Part numbers

SMA-8JP96-00-BK Black

SMA-8JP96-00-RD Red

Tall Windshield

Higher screen to replace standard screen, providing enhanced wind and snow protection especially for those cold days on the trail.

• Clear coloured, polycarbonate screen

• Perfect for taller riders or those who prefer a more upright riding position

• Screen height is 27.2inch

Low Sport Windshield

Provide’s improved protection over stock. Adds a splash of colour with racing inspired graphics.

• Height is 14.75”

Part numbers

SMA-8JP96-30-00 Transparent

Part numbers

SMA-8JP96-11-BL Blue

SMA-8JP96-11-RD Red

SMA-8JP96-11-BK Black

Medium Sport Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail.

• Customize the look of your snowmobile

• Made of smoked polycarbonate

• Pre-marked for the optional mirrors

• 16.5” in size

Part numbers

SMA-8LR96-21-SM Smoke

Low Windshield

Aerodynamic, low profile windscreen complements the aggressive profile of the snowmobile’s front end.

• Made of smoked polycarbonate

• 10.25” in size

Part numbers

SMA-8LR96-10-SM Smoke

Medium Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail..

• Made of clear polycarbonate

• Customize the look of your snowmobile

• 18.5” in size

• Pre-marked for the optional mirrors

Tall Smoked Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail.

• Customize the look of your snowmobile

• Made of smoked polycarbonate

• 19.25” in size

Part numbers

SMA-8LR96-30-SM Smoke

Performance Grips

Slim and comfortable grip design offers better shock absorption.

• Sold in pairs

• Thinner material allows for more effective heat transfer from hand warmer elements

Part numbers

SMA-8LR96-20-SM Smoke

Part numbers

SMA-8JP61-00-BK Black

Trail SXVenom

Custom Cover for SRViper M-TX

Protects unit during trailering or storage

• Cotton canvas is naturally very soft on the finish of the unit

• Vents moisture away

• Expandable windshield panel for accommodating taller accessory windshields

• Add Undercover Protector to protect windshield and shroud area, sold separately

• Strong, preshrunk, waterproof two-ply army duck canvas

Super Sport Caddy Set

Caddy Set to move around easily your snowmobile.

• Constructed of lightweight, reinforced, multi-ribbed, injection-molded plastic

• Features twin wheel casters for greater stability

• Equipped with non-slip Hydro Turf® inserts

Metric Tool Kit

Comprehensive tool set that prepares you for just about anything the road will throw at you.

• Includes ring and open end combination spanners 8, 10, 12 & 14, an adjustable spanner, Vice Grips, 4 way Phillips and flat screwdrivers, sparkplug spanner and gap guage

• Includes also a roll of black electrical tape, tyre pressure gauge, cable ties, wire, rag and #3, 4, 5 & 6 Allen keys

• Comes in a compact roll-up pouch

• Can easily be stowed away in your saddlebag, side case, top case, etc.

Snowmobile Storage Cover

Protects your unit from the elements during trailering or storage. The back is coated with urethane to provide an excellent barrier to the elements and road grime. It includes soft, sewn in polyester undercover that helps protect your unit’s finish while storing and transporting. It has an expandable windshield panel that will accommodate the taller accessory windscreens

• Made of premium, UV resistant Polyester

• Matches the graphics on the Mountain Max

Part numbers

SMA-COVER-88-00 Black

Part numbers

SMA-CADDY-SC-BL Blue

Part numbers

ABA-METRC-00-00 Black

Part numbers

SMA-8NS30-LE-00 Blue

Yamaha Cam Buckle Tie-downs

Strong and durable straps to tie your Yamaha or any other big object down tightly when transporting it in a van or trailer.

• Ease of operation; simple tensioning and one finger release

• Built-in soft hook on the fixed end for looping around handlebars, frame tubes, triple-tree clamps and other structural parts

• Zinc cam buckle is made with a pressure plate to reduce webbing abrasion

• Features the Yamaha logo at intervals

• Assembly strength: 540kg (1,200lb)

• Working load limit: 180kg (400lb)

• Sold per set of two

Snowmobile High-Performance Suspension Grease.

The best snowmobile grease for usage on advanced suspension systems, when needing to react quickly to rough trail conditions.

• Provides extensive protection and wear resistance

• Low temperature protection down to -65°F and yet protection up to 250°F

• Product should be used where service manual indicates ESSO Beacon 325 or Aeroshell Grease

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With EU-plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety: spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Part numbers

ACC-0SS58-40-28 Blue

Part numbers

ACC-SMBGR-SE-14 Black

Part numbers

YME-YEC09-EU-20 Black

Trail SXVenom

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With UK plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety; spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers to fit our range of motorcycles, scooters, ATV, SMB and other products

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Disclaimer

Applicable to UK markets only

Part numbers

YME-YEC01-EU-00 Black

Part numbers

YME-YEC09-UK-00 Black

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Woody’s® Trail Blazer IV™ Runner Set

These runners have six inches of 60° turning carbide. They are great choice if you are looking for overall improvement in safety and handling, or to replace your factory runner.

• Sold in pairs

• 6” of 60º carbide on a ½” diameter host bar

• Use with a studded or un-studded track

Part numbers

YME-YEC01-UK-00 Black

Part numbers

SMA-TYV48-80-00 Black

RSVenture TF

Spoked Rear Axle Guide Wheel

Add some style and color to your snowmobile!

• Sold in pairs

• Bearing is included

• Made out of resistant plastic

• 178mm in size

Part numbers

SMA-8HF38-02-BK Black

Performance X-10 Runners.

Performance Runners engineered for hard riding on varying terrain.

• Sold in pairs

• Features 7/16” runners

• Available with 6” of 90º carbide

Part numbers

SMA-8EN10-21-00 Black

Scorchers™ Ice Scratchers

The kit lubricates the hyfax and assists cooling when riding on hard-packed trails or frozen lakes. The scratchers are constructed of eat-treated, heavy-duty steel springs. It also includes anodized CNC machined aircraft aluminum washers to ensure durability and high performance. Can be used with or without idler wheels.

• Stows away to a nested position when not in use

• Drilling may be required

Part numbers

SMA-ICESC-BK-00 Black

TRIC™ Ice Scratchers

The kit provides additional snow spray in hard-packed icy conditions to help reduce rear suspension hyfax wear and engine overheating. It creates a steady stream of ice crystals to provide both lubrication for the rear skid frame and additional cooling to the heat exchangers on liquid-cooled machines. Features stainless steel cables and adapters which can be rotated to allow for left or right applications. Also includes stainless steel hardware with universal mounting brackets.

• Includes 1/4” threaded replaceable carbide stud

• Allows operation of the reverse gear

• Sold in pairs

TRIC™ Ice Scratchers - Replacement Studs

The kit contains replacement studs for the TRIC™ Ice Scratchers.

• Uses common 1/4” thread

Part numbers

SMA-ICESC-02-ST Blue

Closed Rear Axle Guide Wheels

Add some style and color to your snowmobile.

• Sold in pairs

• Bearing is included

• Silver coloured

• Made out of resistant plastic

Part numbers

SMA-ICESC-CB-AP Aluminium

Part numbers

8DF-47550-01-SL Silver

Spoked Idler Bogey Wheel

Add some style and color to your snowmobile!

• Sold Individually

• Made out of resistant plastic

• 130mm in size

• Includes mounting materials

Part numbers

SMA-8HF38-01-BK Black

DuPont Slides 141”

Perfect for everyday riding on the trails or in the mountains. Reduces the friction and protects the aluminum rails from track wear.

• DuPont Vespel® material inserts

• Space-age polymer / composite material

• 15T scale Rockwell hardness of about 80 (UHMW slide runner hardness rating is about R64)

• Capable of withstanding extreme friction and heat environments

• Pieces are placed at a 30-degree angle across the entire slider for constant contact and even wear

• Made using compression moulding process

• Sold Individually

Part numbers

SMA-DPSSR-00-00 Black

Part numbers

SMA-8LR21-00-BK Black Windshield Bag

Offers convenient, easy-access storage for all essentials you need to take out on the trails.

• Made of durable, weather resistant nylon with colored accents material

• Larger bag, perfect for storage of phones, keys, wallet, camera, small tools, etc.

• Uses windshield mounting points for installation

ABA-2HR35-10-00 Black Spot Light Kit

Enhances sight in low-light conditions with LED technology.

• Powerful spot light

• Easy installation with included hardware

• Easy installation using strong ThreeBond® adhesive for a permanent mount

• Powerful LED spot light with 18 LEDs

• Easy installation

• Ram mount with U bolt for rail mount included

• 12 volt output socket included

• Rubber ball absorbs shock and vibration

• Easily detachable from ram mount

• Weather-resistant rubber body shield

• On/off switch on the light

• Length of power cord is 125 cm-175 cm

• 30 degrees beam

• Frosted lens

• 9 watts

• 1900 lumens

• 4500K colour temp

Part numbers

Optional parts

ATV-12VPK-00-KT 12V DC Plug

12V

DC Plug

Allows power take off for 12V electrical accessories.

• Corrosion resistant and marine grade construction

• Patented moisture resistant sealing ring

• LED indicator light

• Internal 10A fuse

Custom Cover for RS Venture Protects unit during trailing or storage.

• Cotton canvas is naturally very soft on the finish of the unit

• Vents moisture away

• Expandable windshield panel for accommodating taller accessory windshields

• Add Undercover Protector to protect windshield and shroud area, sold separately

• Strong, preshrunk, waterproof two-ply army duck canvas

Snowmobile High-Performance Suspension Grease.

The best snowmobile grease for usage on advanced suspension systems, when needing to react quickly to rough trail conditions.

• Provides extensive protection and wear resistance

• Low temperature protection down to -65°F and yet protection up to 250°F

• Product should be used where service manual indicates ESSO Beacon 325 or Aeroshell Grease

Super Sport Caddy Set Caddy Set to move around easily your snowmobile.

• Constructed of lightweight, reinforced, multi-ribbed, injection-molded plastic

• Features twin wheel casters for greater stability

• Equipped with non-slip Hydro Turf® inserts

Part numbers

ATV-12VPK-00-KT Black

Required parts

ABA-2HR35-10-00 Spot Light Kit

Optional parts

ABA-2HR35-10-00 Spot Light Kit

Part numbers

SMA-COVER-56-00 Black

Part numbers

ACC-SMBGR-SE-14 Black

Part numbers

SMA-CADDY-SC-BL Blue

Metric Tool Kit

Comprehensive tool set that prepares you for just about anything the road will throw at you.

• Includes ring and open end combination spanners 8, 10, 12 & 14, an adjustable spanner, Vice Grips, 4 way Phillips and flat screwdrivers, sparkplug spanner and gap guage

• Includes also a roll of black electrical tape, tyre pressure gauge, cable ties, wire, rag and #3, 4, 5 & 6 Allen keys

• Comes in a compact roll-up pouch

• Can easily be stowed away in your saddlebag, side case, top case, etc.

Yamaha Cam Buckle Tie-downs

Strong and durable straps to tie your Yamaha or any other big object down tightly when transporting it in a van or trailer.

• Ease of operation; simple tensioning and one finger release

• Built-in soft hook on the fixed end for looping around handlebars, frame tubes, triple-tree clamps and other structural parts

• Zinc cam buckle is made with a pressure plate to reduce webbing abrasion

• Features the Yamaha logo at intervals

• Assembly strength: 540kg (1,200lb)

• Working load limit: 180kg (400lb)

• Sold per set of two

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With EU-plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety: spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Part numbers

ABA-METRC-00-00 Black

Part numbers

ACC-0SS58-40-28 Blue

Part numbers

YME-YEC09-EU-20 Black

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With UK plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety; spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers to fit our range of motorcycles, scooters, ATV, SMB and other products

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Disclaimer

Applicable to UK markets only

Part numbers

YME-YEC01-EU-00 Black

Part numbers

YME-YEC09-UK-00 Black

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Part numbers

YME-YEC01-UK-00 Black

Sidewinder L-TX LE

Combination Trunk Bag

Increase your luggage space with options to spare and plenty of compartments to keep all items well organized.

• Tunnel bag with saddlebags combination

• Multi-compartment design

• Durable, weather resistant nylon

• Will not work in combination with the optional Two-Up Seat

Saddle Bags

When you need to bring along extra gear for your ride, these saddle bags are essential.

• Large bags, one on each side of the seat/ tunnel

• Durable, weather-resistant 1000-denier nylon

• 800-denier nylon accent material

• Mounted to the tunnel and under the seat

• Set of two

Medium Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 18.8L (.665 cf ) capacity

Part numbers

SMA-8LR63-00-BK Black

Part numbers

SMA-8LR73-00-BK Black

Part numbers

SMA-8MB63-00-BK Black

Large Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 21.8L (.77 cf ) capacity

Extra Large Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 22.9L (. 81 cf ) capacity

Tunnel Rack

Bring any extra items you need with this large tunnel rack. This design allows you to easily secure your gear with bungee cords or other types of lines (not included).

• Requires Rear Grab Bar & Hitch Kit, sold separately

• Mounting kit included

Handlebar Bag

Add some convenient storage to your snowmobile with this multi-compartment bag. Mounts using both the handlebar and handlebar risers.

• Made of durable, weather resistant nylon.

Part numbers

SMA-8MB64-00-BK Black

Part numbers

SMA-8MB65-00-BK Black

Part numbers

SMA-8JPRK-10-BK Black

Required parts

SMA-8MH41-00-00 Rear Grab Bar & Hitch Kit

Optional parts

SMA-8JP79-10-00 Pintle Tow Conversion Kit

Part numbers

SMA-8LY43-00-00 Black

Handlebar Bag

Add some convenient storage to your snowmobile with this multi-compartment handlebar bag.

• Durable, weather-resistant nylon

• Accent material in 800-denier nylon

• Mounted by using both the handlebar and handlebar risers

M-TX Tunnel gear bag

Simple water-resistant moulded top tunnel pack perfect for the mountains.

• Mounts with quick attach straps to the rear grab bar

Part numbers

SMA-8JP43-01-00 Black

Part numbers

SMA-8KG63-00-00 Black

Billet Suspension Adjustment Blocks

The suspension block helps you achieve the ride quality that you want by allowing custom tuning of your rear suspension to 4 levels of spring preload.

• Made from solid billet aluminum.

• Anodized for long life.

• Sold in pairs

Billet Fuel Cap

For those who pay attention to the finer details of their sled, this stylish cap replaces stock for a more custom look.

• Made of billet aluminium

• Clean design with a Laser-Etched Tuning Fork logo

Part numbers

SMA-8JP39-BL-10 Black

Part numbers

SMA-8MY67-00-RD Red

SMA-8MY67-00-BL Blue

SMA-8MY67-00-BK Black

Woody’s Extender Trail III Runner set 4”

The Woody’s® Extender Trail III™ Runners are Woody’s entry level carbide runner featuring four inches of 60° carbide. Whether looking for a replacement factory runner, a cutting edge in hardpacked snow and ice, or to improve safety and handling, this is the right option. They are perfect for trail touring.

• Made out of HDPE

• Bolts directly to the stock ski

• Sold in pairs

Stryke Ski Kit

Offers a perfect balance between lightweight steering effort and precision handling over a wide range of snow conditions.

• Kit includes two skis complete with handles and four ski shims.

• Additional Ski loop colours available separately

• Carbides and Mounting hardware sold separately

• For added adjustment, various Styke Ski Shim Kit are separately

• Uses stock hardware.

• Sold individually.

Woody’s® Trail Blazer IV™ Runner set

These runners have six inches of 60° turning carbide. They are great choice if you are looking for overall improvement in safety and handling, or to replace your factory runner.

• 6” of 60º carbide on a ½” diameter host bar

• Sold in pairs

• Use with a studded or un-studded track

Stryke Ski Kit

Offers a perfect balance between lightweight steering effort and precision handling over a wide range of snow conditions.

• Kit includes two skis complete with handles and four ski shims.

• Additional Ski loop colours available separately

• Carbides and Mounting hardware sold separately

• For added adjustment, various Styke Ski Shim Kit are separately

Part numbers

SMA-EYV38-50-00 Black

Part numbers

8MA-F3712-10-00 Silver

8MA-F3712-20-00 Blue

8MA-F3712-30-00 Orange

8MA-F3712-40-00 Black

8MA-F3712-60-00 Blue

Required parts

SMA-STRYK-BL-WH Stryke Ski Kit

Part numbers

SMA-TYV48-50-00 Black

Part numbers

SMA-STRYK-BL-WH Blue

SMA-STRYK-RD-WH Red

SMA-STRYK-BK-WH Black

Required parts

8MA-F3712-10-00 Stryke Ski Kit

Stryke Ski Kit

Offers a perfect balance between lightweight steering effort and precision handling over a wide range of snow conditions.

• Kit includes two skis complete with handles and four ski shims.

• Additional Ski loop colours available separately

• Carbides and Mounting hardware sold separately

• For added adjustment, various Styke Ski Shim Kit are separately

DuPont slides

Perfect for everyday riding on the trails or in the mountains.Reduces the friction and protects the aluminum rails from track wear.

• DuPont Vespel® material inserts

• Space-age polymer/composite material, that is stronger than hardened steel, aluminum, or even titanium

• 15T scale Rockwell hardness of about 80 (UHMW slide runner hardness rating is about R64)

• Capable of withstanding extreme friction and heat environments

• Pieces are placed at a 30-degree angle across the entire slider for constant contact and even wear

• Made using compression moulding process

• Partially made with current UHMW plastic slide runner material

• Sold Individually

Rear Fourth Wheel Kit

Outside idler wheels help keep track in proper alignment and spreads load evenly across the entire track.

• Wheels

• Spacer blocks

• All necessary hardware

Part numbers

SMA-SHIMS-KT-00 Black

Required parts

SMA-STRYK-BL-WH Stryke Ski Kit

Part numbers

SMA-8JPDP-SS-00 Black

Woody’s® Executive Runner Set

The Woody’s® Executive Runner Set is designed for the very aggressive trail rider, snocross and cross-country racer. The Wear Bar Runners feature full-length hard-weld surfaces between all carbide inserts, providing excellent runner life.

• Sold in pairs

• 1½” carbide wear pads front and rear of bar

• Carbide must be balanced with a studded track

Part numbers

SMA-8JY47-00-BK Black

Part numbers

SMA-KYV85-00-00 Black

Trail Sidewinder L-TX LE

Ice Scratchers

Helps prevent slide runner wear when on ice and hard pack snow.

• Rests on top of the slide rail when not in use or when backing up

• Not meant to use in reverse

• Sold in pairs

Part numbers

SMA-8JP38-00-KT Black

Windshield Mirror Kit

Accentuates the sporty styling of your snowmobile, while keeping aware of your surroundings.

• Mounted to outside of windshield

• Can be combined with the optional Medium Sport Windshield and optional Medium Windshield

Part numbers

SMA-8LJ26-00-00 Black

Required parts

SMA-8LJMR-AD-KT Mounting kit for Windshield Mirrors (Sidewinder and SRViper)

SMA-8LR96-21-SM Medium Sport Windshield

SMA-8LR96-30-SM Medium Windshield

Rear Grab Bar & Hitch Kit

Strong, secure steel grab bar with pivotstyle hitch.

• Required for mounting the optional Tunnel Rack and optional Two-Up Seat

• Includes all necessary hardware

• 4 or 8 mounting pockets

Part numbers

SMA-8MH41-00-00 Black

Optional parts

SMA-8JP79-10-00 Pintle Tow Conversion Kit

SMA-8JPRK-10-BK Tunnel Rack

Pintle Tow Conversion Kit

Converts optional swivel hitch steel grab barto a heavy-duty pintle-style hitch

• Durable steel construction

Part numbers

SMA-8JP79-10-00 Black

Required parts

SMA-8MH41-00-00 Rear Grab Bar & Hitch Kit

Scorchers™ Ice Scratchers

The kit lubricates the hyfax and assists cooling when riding on hard-packed trails or frozen lakes. The scratchers are constructed of eat-treated, heavy-duty steel springs. It also includes anodized CNC machined aircraft aluminum washers to ensure durability and high performance. Can be used with or without idler wheels.

• Stows away to a nested position when not in use

• Drilling may be required

TRIC™ Ice Scratchers

The kit provides additional snow spray in hard-packed icy conditions to help reduce rear suspension hyfax wear and engine overheating. It creates a steady stream of ice crystals to provide both lubrication for the rear skid frame and additional cooling to the heat exchangers on liquid-cooled machines. Features stainless steel cables and adapters which can be rotated to allow for left or right applications. Also includes stainless steel hardware with universal mounting brackets.

• Includes 1/4” threaded replaceable carbide stud

• Allows operation of the reverse gear

• Sold in pairs

TRIC™ Ice Scratchers - Replacement Studs

The kit contains replacement studs for the TRIC™ Ice Scratchers.

• Uses common 1/4” thread

Part numbers

SMA-ICESC-BK-00 Black

Part numbers

SMA-ICESC-02-ST Blue

Mounting kit for Windshield Mirrors (Sidewinder and SRViper)

Mounting kit for Windshield Mirrors (Sidewinder and SRViper).Only compatible with SMA-8LR96-21-SM & SMA-8LR9630-SM.

• Mounts to outside of windshield

Part numbers

SMA-ICESC-CB-AP Aluminium

Part numbers

SMA-8LJMR-AD-KT Black

Optional parts

SMA-8LR96-21-SM Medium Sport Windshield

SMA-8LR96-30-SM Medium Windshield

Seat Pack

Get that extra bit of storage you need, while maintaining the original profile of your sled.

• Durable construction

• Weather resistant nylon material

• Mounts to the tunnel and under the seat

• Multi-compartment design

Aluminium Front Grab Bar

Offers a solid grip and bold styling.

• Constructed of ultra-lightweight aluminium tubing

• 1,6kg weight

Part numbers

SMA-8JR63-00-00 Black

Pro Skid Plate

Race-inspired design offers lightweight protection from stumps, rocks, ice chunks, and other trail debris that can damage the bottom of the snowmobile chassis.

• Durable UHMW construction

• Includes all mounting hardware

Part numbers

SMA-8MT55-00-BK Black

Deluxe Heated Shield Outlet

Add a heated shield outlet to your snowmobile

• Dash mounted

• Equipped with cover to protect plug from ice and snow

• Simple installation with factory accessory pig-tail

Part numbers

SMA-8LR34-00-BK Black

Part numbers

SMA-8LR10-00-00 Black

Sidewinder L-TX LE Trail

Console Knee Pads

Add comfort and extra grip for your knees while protecting your machine’s bodywork from scratching.

• Heavy-duty durable nylon material

• Mounts to snowmobile securely

• Sold in pairs

Part numbers

SMA-8LR24-00-BK Black

Snowmobile Handguards Mounts

Made of sturdy plastic, this mounting kit is necessary for the installation of the snowmobile handguards: SMA-8LYHG-00BK (sold separately)

• Sold in pairs

Part numbers

SMA-8LYMT-00-00 Black

Required parts

SMA-8LYHG-00-BK Snowmobile Handguards

Colored Snow Flap

Add some style and flair by simply replacing the stock flap on your snowmobile.

• Sold Individually

• The Snow Flaps come in three colours

• Easy installation

• Mounting hardware is included

Snowmobile Handguards

Stylised protection for your hands from the chilling winds

• Sold in pairs

• Requires Mounting Hardware: Part #SMA8LYMT-00-00 (sold separately)

Part numbers

SMA-8JP77-59-BL Blue

SMA-8JP77-59-BK Black

SMA-8JP77-59-RD Red

Part numbers

SMA-8LYHG-00-BK Black

Required parts

SMA-8LYMT-00-00 Snowmobile Handguards Mounts

Rear Trail Skid Plate

Provides full coverage protection for the clutch, exhaust and chain case components.

• 1/4” thick high molecular weight polyethylene

Part numbers

SMA-8LR34-RR-BK Black

Windshield Bag

Offers convenient, easy-access storage for all essentials you need to take out on the trails.

• Made of durable, weather resistant nylon with colored accents material

• Larger bag, perfect for storage of phones, keys, wallet, camera, small tools, etc.

• Uses windshield mounting points for installation

Spot Light Kit

Enhances sight in low-light conditions with LED technology.

• Powerful spot light

• Easy installation with included hardware

• Easy installation using strong ThreeBond® adhesive for a permanent mount

• Powerful LED spot light with 18 LEDs

• Easy installation

• Ram mount with U bolt for rail mount included

• 12 volt output socket included

• Rubber ball absorbs shock and vibration

• Easily detachable from ram mount

• Weather-resistant rubber body shield

• On/off switch on the light

• Length of power cord is 125 cm-175 cm

• 30 degrees beam

• Frosted lens

• 9 watts

• 1900 lumens

• 4500K colour temp

Engine Stop Tether

Stay safe and prevent unfortunate events. This kit stops the engine In the event of getting separated from your snowmobile.

• End of the tether attaches to a jacket’s D-ring

Part numbers

SMA-8LR21-00-BK Black

Part numbers

ABA-2HR35-10-00 Black

Part numbers

SMA-8MS81-00-00 Red

Sidewinder L-TX LE Trail

Low Sport Windscreen Red

For improved protection over the stock windscreen.

• 37.5 cm (14.75 inch) tall

• Yamaha Red

Part numbers

SMA-8MY96-11-RD Red

Windshield Pack

Perfect for mountain and backcountry riders, this pack does double duty as both a sleek windshield and convenient storage for your unit.

• Semi-rigid construction

• Water-resistant

• Large zipper pull tabs easy to open and close with gloves on

Low Sport Windshield – Blue

Improved protection compared with stock windshield.

• Yamaha Racing Blue

• 37.5 cm tall

Tall windshield

Higher screen to replace standard screen, providing enhanced wind protection especially for those cold days on the trail.

• Adding a custom look to the front profile

• Clear coloured, polycarbonate screen

• Screen height is 19,25inch

Part numbers

SMA-8MS21-00-BK Black

Part numbers

SMA-8MY96-11-BL Blue

Part numbers

8MH-K7210-00-00 Transparent

Trail Sidewinder L-TX LE

Low Sport Windshield

Provide’s improved protection over stock. Adds a splash of colour with racing inspired graphics.

• Height is 14.75”

Part numbers

SMA-8JP96-11-BL Blue

SMA-8JP96-11-RD Red

SMA-8JP96-11-BK Black

Medium Sport Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail.

• Customize the look of your snowmobile

• Made of smoked polycarbonate

• Pre-marked for the optional mirrors

• 16.5” in size

Low Windshield

Aerodynamic, low profile windscreen complements the aggressive profile of the snowmobile’s front end.

• Made of smoked polycarbonate

• 10.25” in size

Part numbers

SMA-8LR96-21-SM Smoke

Medium Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail..

• Made of clear polycarbonate

• Customize the look of your snowmobile

• 18.5” in size

• Pre-marked for the optional mirrors

Part numbers

SMA-8LR96-10-SM Smoke

Part numbers

SMA-8LR96-30-SM Smoke

Tall Smoked Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail.

• Customize the look of your snowmobile

• Made of smoked polycarbonate

• 19.25” in size

Part numbers

SMA-8LR96-20-SM Smoke

Performance Grips

Slim and comfortable grip design offers better shock absorption.

• Sold in pairs

• Thinner material allows for more effective heat transfer from hand warmer elements

Part numbers

SMA-8JP61-00-BK Black

Super Sport Caddy Set Caddy Set to move around easily your snowmobile.

• Constructed of lightweight, reinforced, multi-ribbed, injection-molded plastic

• Features twin wheel casters for greater stability

• Equipped with non-slip Hydro Turf® inserts

Metric Tool Kit

Comprehensive tool set that prepares you for just about anything the road will throw at you.

• Includes ring and open end combination spanners 8, 10, 12 & 14, an adjustable spanner, Vice Grips, 4 way Phillips and flat screwdrivers, sparkplug spanner and gap guage

• Includes also a roll of black electrical tape, tyre pressure gauge, cable ties, wire, rag and #3, 4, 5 & 6 Allen keys

• Comes in a compact roll-up pouch

• Can easily be stowed away in your saddlebag, side case, top case, etc.

Part numbers

SMA-CADDY-SC-BL Blue

Part numbers

ABA-METRC-00-00 Black

Snowmobile High-Performance Suspension Grease.

The best snowmobile grease for usage on advanced suspension systems, when needing to react quickly to rough trail conditions.

• Provides extensive protection and wear resistance

• Low temperature protection down to -65°F and yet protection up to 250°F

• Product should be used where service manual indicates ESSO Beacon 325 or Aeroshell Grease

YEC-9

Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With EU-plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety: spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Part numbers

ACC-SMBGR-SE-14 Black

Part numbers

YME-YEC09-EU-20 Black

Part numbers

YME-YEC01-EU-00 Black

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With UK plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety; spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers to fit our range of motorcycles, scooters, ATV, SMB and other products

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Disclaimer

Applicable to UK markets only

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Custom Cover

Protects your unit from the elements during trailing or storage.

• Strong, preshrunk, two-ply army duck canvas, especially finished to resist water and mildew

• Made of cotton canvas that is very soft on the finish of your unit and conforms like a pair of jeans, will also vent moisture away

• Expandable windshield panel for accommodating taller accessory windshields

Part numbers

YME-YEC09-UK-00 Black

Part numbers

YME-YEC01-UK-00 Black

Part numbers

SMA-8MB29-00-00 Black

HI-VIS Limited Edition Cover

Protects the unit from damage during trailering or storage.

• Premium SurLast® polyester fabric, UV and color-stable

• Back-coated with urethane to provide an excellent barrier to different weather conditions and road grime

• Includes soft, sewn in polyester undercover

• An expandable windshield panel will accommodate the taller accessory windshields

• Unit-matched colors and graphics

Part numbers

SMA-8MM30-LE-00 Black

Transporter 800

Combination Trunk Bag

Increase your luggage space with options to spare and plenty of compartments to keep all items well organized.

• Tunnel bag with saddlebags combination

• Multi-compartment design

• Durable, weather resistant nylon

• Will not work in combination with the optional Two-Up Seat

Expandable Rack Pack

Perfect for when you need to bring that extra gear on your ride.

• Large capacity storage

• Quick-attach straps

• Fits in the Tunnel Rack, sold separately

Part numbers

SMA-8LR63-00-BK Black

Part numbers

SMA-8JY63-00-00 Black

Saddle Bags

When you need to bring along extra gear for your ride, these saddle bags are essential.

• Large bags, one on each side of the seat/ tunnel

• Durable, weather-resistant 1000-denier nylon

• 800-denier nylon accent material

• Mounted to the tunnel and under the seat

• Set of two

Part numbers

SMA-8LR73-00-BK Black

Utility Transporter 800

Medium Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 18.8L (.665 cf ) capacity

Large Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 21.8L (.77 cf ) capacity

Extra Large Tunnel Gear Bag

Add some extra storage to the snowmobile while retaining its sleek styling.

• Features semi-rigid construction with water resistant zippers

• Large pull tabs allow for opening the bag with gloves on

• Quick installation with the 1/4 turn fastener system

• 22.9L (. 81 cf ) capacity

Handlebar Bag

Add some convenient storage to your snowmobile with this multi-compartment bag. Mounts using both the handlebar and handlebar risers.

• Made of durable, weather resistant nylon.

Part numbers

SMA-8MB63-00-BK Black

Part numbers

SMA-8MB64-00-BK Black

Part numbers

SMA-8MB65-00-BK Black

Part numbers

SMA-8LY43-00-00 Black

Transporter 800 Utility

Handlebar Bag

Add some convenient storage to your snowmobile with this multi-compartment handlebar bag.

• Durable, weather-resistant nylon

• Accent material in 800-denier nylon

• Mounted by using both the handlebar and handlebar risers

Deluxe Tunnel Bag

Pack a snack and extra essentials for that long or short ride.

• Semi-rigid bag

• Easily removable

Part numbers

SMA-8JP43-01-00 Black

M-TX Tunnel gear bag

Simple water-resistant moulded top tunnel pack perfect for the mountains.

• Mounts with quick attach straps to the rear grab bar

Part numbers

SMA-8JX63-00-00 Black

Woody’s® Carbide Wear Bar Runners - Trailblazer Series

The Woody’s® Carbide Wear Bar Runners - Trailblazer Series are designed for aggressive trail riders.

• Sold in pairs

• Carbide wear pads are a full 1½” long

• 6” of 60º carbide on a ½” diameter host bar

• Full length hard-weld between all three carbide inserts

Part numbers

SMA-8KG63-00-00 Black

Part numbers

SMA-TYV46-58-00 Black

Woody’s®

6” Ace Runner Set

This carbide runner is the tallest in the industry and has a narrow, rectangular profile for aggressive turning capabilities. Its 60° turning carbide (available in 6” & 8”) has been strategically placed to protect the runner and reduce darting by carving through existing grooves. Works great on Crossovers and in deep snow.

• Sold in pairs

• 6” of 60° turning carbide on a tall, square host bar

Part numbers

SMA-AY688-00-00 Black

Woody’s®

8” Ace Runner Set for the Sidewinder

This carbide runner is the tallest in the industry and has a narrow, rectangular profile for aggressive turning capabilities. Its 60° turning carbide (available in 6” & 8”) has been strategically placed to protect the runner and reduce darting by carving through existing grooves. Works great on Crossovers and in deep snow.

• Sold in pairs

• 8” of 60° turning carbide on a tall, square host bar

Rear Fourth Wheel Kit

Outside idler wheels help keep track in proper alignment and spreads load evenly across the entire track.

• Wheels

• Spacer blocks

• All necessary hardware

Part numbers

SMA-AY888-00-00 Black

Part numbers

SMA-8JY47-00-BK Black

Ice Scratchers

Helps prevent slide runner wear when on ice and hard pack snow.

• Rests on top of the slide rail when not in use or when backing up

• Not meant to use in reverse

• Sold in pairs

Part numbers

SMA-8JP38-00-KT Black

Transporter 800 Utility

Windshield Mirror Kit

Accentuates the sporty styling of your snowmobile, while keeping aware of your surroundings.

• Mounted to outside of windshield

• Can be combined with the optional Medium Sport Windshield and optional Medium Windshield

Part numbers

SMA-8LJ26-00-00 Black

Required parts

SMA-8LJMR-AD-KT Mounting kit for Windshield Mirrors (Sidewinder and SRViper)

SMA-8LR96-21-SM Medium Sport Windshield

SMA-8LR96-30-SM Medium Windshield

DuPont Slides 174”

Perfect for everyday riding on the trails or in the mountains. Reduces the friction and protects the aluminum rails from track wear.

• DuPont Vespel® material inserts

• Space-age polymer / composite material

• 15T scale Rockwell hardness of about 80 (UHMW slide runner hardness rating is about R64)

• Capable of withstanding extreme friction and heat environments

• Pieces are placed at a 30-degree angle across the entire slider for constant contact and even wear

• Made using compression moulding process

• Partially made with current UHMW plastic slide runner material

• Sold Individually

Console Knee Pads

Add comfort and extra grip for your knees.

• Mounting hardware included

Part numbers

SMA-DPSSV-MT-00 Black

Scorchers™ Ice Scratchers

The kit lubricates the hyfax and assists cooling when riding on hard-packed trails or frozen lakes. The scratchers are constructed of eat-treated, heavy-duty steel springs. It also includes anodized CNC machined aircraft aluminum washers to ensure durability and high performance. Can be used with or without idler wheels.

• Stows away to a nested position when not in use

• Drilling may be required

Part numbers

SMA-8JP24-00-WH Black

Part numbers

SMA-ICESC-BK-00 Black

TRIC™ Ice Scratchers

The kit provides additional snow spray in hard-packed icy conditions to help reduce rear suspension hyfax wear and engine overheating. It creates a steady stream of ice crystals to provide both lubrication for the rear skid frame and additional cooling to the heat exchangers on liquid-cooled machines. Features stainless steel cables and adapters which can be rotated to allow for left or right applications. Also includes stainless steel hardware with universal mounting brackets.

• Includes 1/4” threaded replaceable carbide stud

• Allows operation of the reverse gear

• Sold in pairs

TRIC™ Ice Scratchers - Replacement Studs

The kit contains replacement studs for the TRIC™ Ice Scratchers.

• Uses common 1/4” thread

Part numbers

SMA-ICESC-02-ST Blue

Mounting kit for Windshield Mirrors (Sidewinder and SRViper)

Mounting kit for Windshield Mirrors (Sidewinder and SRViper).Only compatible with SMA-8LR96-21-SM & SMA-8LR9630-SM.

• Mounts to outside of windshield

Part numbers

SMA-ICESC-CB-AP Aluminium

Front Skid Plate

Improves approach angle and protects the nose cone from damage by stumps, rocks, ice chunks and other debris.

• Can be combined with the optional Rear Skid Plate

• Will not work in conbination with Sport Front Grab Bar

Part numbers

SMA-8LJMR-AD-KT Black

Optional parts

SMA-8LR96-21-SM Medium Sport Windshield

SMA-8LR96-30-SM Medium Windshield

Part numbers

SMA-8JP34-FR-BK Black

Transporter 800 Utility

Floatation skid plate

Adds the maximum amount of protection and additional flotation, helping the snowmobile float through the powder.

• Does not fit up with optional accessory front bumpers

• Durable UHMW construction

• Incompatible with optional accessory front bumpers

• Mounting kit included

Deluxe Heated Shield Outlet

Add a heated shield outlet to your snowmobile

• Dash mounted

• Equipped with cover to protect plug from ice and snow

• Simple installation with factory accessory pig-tail

Part numbers

SMA-8KC34-00-BK Black

Part numbers

SMA-8LR10-00-00 Black

Rail Brace Kit

Designed with the hard-core riders in mind, these aluminium braces add strength to the stock rails.

• Only 3,4 [kg] per kit

• Easy, bolt-on installation

Part numbers

SMA-8MS60-BK-00 Black

Console Knee Pads

Add comfort and extra grip for your knees while protecting your machine’s bodywork from scratching.

• Heavy-duty durable nylon material

• Mounts to snowmobile securely

• Sold in pairs

Part numbers

SMA-8LR24-00-BK Black

Utility Transporter 800

Snowmobile Handguards Mounts

Made of sturdy plastic, this mounting kit is necessary for the installation of the snowmobile handguards: SMA-8LYHG-00BK (sold separately)

• Sold in pairs

Part numbers

SMA-8LYMT-00-00 Black

Required parts

SMA-8LYHG-00-BK Snowmobile Handguards

Colored Snow Flap

Add some style and flair by simply replacing the stock flap on your snowmobile.

• Sold Individually

• The Snow Flaps come in three colours

• Easy installation

• Mounting hardware is included

Snowmobile Handguards

Stylised protection for your hands from the chilling winds

• Sold in pairs

• Requires Mounting Hardware: Part #SMA8LYMT-00-00 (sold separately)

Part numbers

SMA-8JP77-59-BL Blue

SMA-8JP77-59-BK Black

SMA-8JP77-59-RD Red

Part numbers

SMA-8LYHG-00-BK Black

Required parts

SMA-8LYMT-00-00 Snowmobile Handguards Mounts

Switch Guards

Helps prevent accidental shut off of control switches.

• Hand/thumb warmer guard

• Stop switch guard

• Adhesive backing

Part numbers

SMA-8KG86-00-00 Black

Transporter 800 Utility

Windshield Bag

Offers convenient, easy-access storage for all essentials you need to take out on the trails.

• Made of durable, weather resistant nylon with colored accents material

• Larger bag, perfect for storage of phones, keys, wallet, camera, small tools, etc.

• Uses windshield mounting points for installation

Spot Light Kit

Enhances sight in low-light conditions with LED technology.

• Powerful spot light

• Easy installation with included hardware

• Easy installation using strong ThreeBond® adhesive for a permanent mount

• Powerful LED spot light with 18 LEDs

• Easy installation

• Ram mount with U bolt for rail mount included

• 12 volt output socket included

• Rubber ball absorbs shock and vibration

• Easily detachable from ram mount

• Weather-resistant rubber body shield

• On/off switch on the light

• Length of power cord is 125 cm-175 cm

• 30 degrees beam

• Frosted lens

• 9 watts

• 1900 lumens

• 4500K colour temp

Engine Stop Tether

Stay safe and prevent unfortunate events. This kit stops the engine In the event of getting separated from your snowmobile.

• End of the tether attaches to a jacket’s D-ring

Part numbers

SMA-8LR21-00-BK Black

Windshield Pack

Perfect for mountain and backcountry riders, this pack does double duty as both a sleek windshield and convenient storage for your unit.

• Semi-rigid construction

• Water-resistant

• Large zipper pull tabs easy to open and close with gloves on

Part numbers

ABA-2HR35-10-00 Black

Part numbers

SMA-8MS81-00-00 Red

Part numbers

SMA-8MS21-00-BK Black

Utility Transporter 800

Low Sport Windshield – Blue

Improved protection compared with stock windshield.

• Yamaha Racing Blue

• 37.5 cm tall

Medium Windshield

Adds both style and function while offering up even more wind protection for those especially cold days on the trail. Gives a custom look to the front profile of the snowmobile.

• Height is 18.5”

• Made of clear polycarbonate

• Pre-marked for accessory mirrors SMA8LJ26-00-00 sold seperately

Tall windshield

Higher screen to replace standard screen, providing enhanced wind protection especially for those cold days on the trail.

• Adding a custom look to the front profile

• Clear coloured, polycarbonate screen

• Screen height is 19,25inch

Part numbers

SMA-8MY96-11-BL Blue

Part numbers

SMA-8JP96-20-00 Transparent

SMA-8JP96-20-SM Smoke

Part numbers

8MH-K7210-00-00 Transparent

Extreme Low Windshield

For an upgraded look this stylish windshield fits the bill.

• Height is 6.5”

• Transparent

Part numbers

SMA-8JP96-00-BK Black

SMA-8JP96-00-RD Red

Transporter 800 Utility

Tall Windshield

Higher screen to replace standard screen, providing enhanced wind and snow protection especially for those cold days on the trail.

• Clear coloured, polycarbonate screen

• Perfect for taller riders or those who prefer a more upright riding position

• Screen height is 27.2inch

Low Sport Windshield

Provide’s improved protection over stock. Adds a splash of colour with racing inspired graphics.

• Height is 14.75”

Part numbers

SMA-8JP96-30-00 Transparent

Part numbers

SMA-8JP96-11-BL Blue

SMA-8JP96-11-RD Red

SMA-8JP96-11-BK Black

Medium Sport Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail.

• Customize the look of your snowmobile

• Made of smoked polycarbonate

• Pre-marked for the optional mirrors

• 16.5” in size

Low Windshield

Aerodynamic, low profile windscreen complements the aggressive profile of the snowmobile’s front end.

• Made of smoked polycarbonate

• 10.25” in size

Part numbers

SMA-8LR96-21-SM Smoke

Part numbers

SMA-8LR96-10-SM Smoke

Utility Transporter 800

Medium Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail..

• Made of clear polycarbonate

• Customize the look of your snowmobile

• 18.5” in size

• Pre-marked for the optional mirrors

Tall Smoked Windshield

Adds both style and function while offering even more wind protection for those especially cold days on the trail.

• Customize the look of your snowmobile

• Made of smoked polycarbonate

• 19.25” in size

Part numbers

SMA-8LR96-30-SM Smoke

Performance Grips Slim and comfortable grip design offers better shock absorption.

• Sold in pairs

• Thinner material allows for more effective heat transfer from hand warmer elements

Part numbers

SMA-8LR96-20-SM Smoke

Custom Cover for SRViper M-TX

Protects unit during trailering or storage

• Cotton canvas is naturally very soft on the finish of the unit

• Vents moisture away

• Expandable windshield panel for accommodating taller accessory windshields

• Add Undercover Protector to protect windshield and shroud area, sold separately

• Strong, preshrunk, waterproof two-ply army duck canvas

Part numbers

SMA-8JP61-00-BK Black

Part numbers

SMA-COVER-88-00 Black

Super Sport Caddy Set

Caddy Set to move around easily your snowmobile.

• Constructed of lightweight, reinforced, multi-ribbed, injection-molded plastic

• Features twin wheel casters for greater stability

• Equipped with non-slip Hydro Turf® inserts

Metric Tool Kit

Comprehensive tool set that prepares you for just about anything the road will throw at you.

• Includes ring and open end combination spanners 8, 10, 12 & 14, an adjustable spanner, Vice Grips, 4 way Phillips and flat screwdrivers, sparkplug spanner and gap guage

• Includes also a roll of black electrical tape, tyre pressure gauge, cable ties, wire, rag and #3, 4, 5 & 6 Allen keys

• Comes in a compact roll-up pouch

• Can easily be stowed away in your saddlebag, side case, top case, etc.

Snowmobile Storage Cover

Protects your unit from the elements during trailering or storage. The back is coated with urethane to provide an excellent barrier to the elements and road grime. It includes soft, sewn in polyester undercover that helps protect your unit’s finish while storing and transporting. It has an expandable windshield panel that will accommodate the taller accessory windscreens

• Made of premium, UV resistant Polyester

• Matches the graphics on the Mountain Max

Yamaha Cam Buckle Tie-downs

Strong and durable straps to tie your Yamaha or any other big object down tightly when transporting it in a van or trailer.

• Ease of operation; simple tensioning and one finger release

• Built-in soft hook on the fixed end for looping around handlebars, frame tubes, triple-tree clamps and other structural parts

• Zinc cam buckle is made with a pressure plate to reduce webbing abrasion

• Features the Yamaha logo at intervals

• Assembly strength: 540kg (1,200lb)

• Working load limit: 180kg (400lb)

• Sold per set of two

Part numbers

SMA-CADDY-SC-BL Blue

Part numbers

ABA-METRC-00-00 Black

Part numbers

SMA-8NS30-LE-00 Blue

Part numbers

ACC-0SS58-40-28 Blue

Utility Transporter 800

Snowmobile High-Performance Suspension Grease.

The best snowmobile grease for usage on advanced suspension systems, when needing to react quickly to rough trail conditions.

• Provides extensive protection and wear resistance

• Low temperature protection down to -65°F and yet protection up to 250°F

• Product should be used where service manual indicates ESSO Beacon 325 or Aeroshell Grease

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With EU-plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety: spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Part numbers

ACC-SMBGR-SE-14 Black

Part numbers

YME-YEC09-EU-20 Black

Part numbers

YME-YEC01-EU-00 Black

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With UK plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety; spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers to fit our range of motorcycles, scooters, ATV, SMB and other products

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Disclaimer

Applicable to UK markets only

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Woody’s® Trail Blazer IV™ Runner Set

These runners have six inches of 60° turning carbide. They are great choice if you are looking for overall improvement in safety and handling, or to replace your factory runner.

• Sold in pairs

• 6” of 60º carbide on a ½” diameter host bar

• Use with a studded or un-studded track

Part numbers

YME-YEC09-UK-00 Black

Part numbers

YME-YEC01-UK-00 Black

Part numbers

SMA-TYV48-80-00 Black

Transporter Lite

Handlebar Bag

Add some convenient storage to your snowmobile with this multi-compartment bag. Mounts using both the handlebar and handlebar risers.

• Made of durable, weather resistant nylon.

Part numbers

SMA-8LY43-00-00 Black

Tunnel Bag

Tunnel Bag mounts to the tunnel of your snowmobile for added storage and a sleek look to match your sledge.

• Easy installation

Part numbers

SMA-8NT63-00-00 Black

Windshield Bag

Perfect for phones, keys, wallet, camera, small tools, etc.

• Convenient, easy-access storage for smaller items

• Durable, weather-resistant nylon

• Uses windshield screws for mounting

Part numbers

SMA-8NT21-00-00 Black

Spoked Rear Axle Guide Wheel

Add some style and color to your snowmobile!

• Sold in pairs

• Bearing is included

• Made out of resistant plastic

• 178mm in size

Part numbers

SMA-8HF38-02-BK Black

TRIC™ Ice Scratchers

The kit provides additional snow spray in hard-packed icy conditions to help reduce rear suspension hyfax wear and engine overheating. It creates a steady stream of ice crystals to provide both lubrication for the rear skid frame and additional cooling to the heat exchangers on liquid-cooled machines. Features stainless steel cables and adapters which can be rotated to allow for left or right applications. Also includes stainless steel hardware with universal mounting brackets.

• Includes 1/4” threaded replaceable carbide stud

• Allows operation of the reverse gear

• Sold in pairs

TRIC™ Ice Scratchers - Replacement Studs

The kit contains replacement studs for the TRIC™ Ice Scratchers.

• Uses common 1/4” thread

Part numbers

SMA-ICESC-02-ST Blue

Spoked Idler Bogey Wheel

Add some style and color to your snowmobile!

• Sold Individually

• Made out of resistant plastic

• 130mm in size

• Includes mounting materials

Part numbers

SMA-ICESC-CB-AP Aluminium

Part numbers

SMA-8HF38-01-BK Black

Utility Transporter Lite

Snowmobile Handguards Mounts

Made of sturdy plastic, this mounting kit is necessary for the installation of the snowmobile handguards: SMA-8LYHG-00BK (sold separately)

• Sold in pairs

Part numbers

SMA-8LYMT-00-00 Black

Required parts

SMA-8LYHG-00-BK Snowmobile Handguards

Snowmobile Handguards

Stylised protection for your hands from the chilling winds

• Sold in pairs

• Requires Mounting Hardware: Part #SMA8LYMT-00-00 (sold separately)

Part numbers

SMA-8LYHG-00-BK Black

Required parts

SMA-8LYMT-00-00 Snowmobile Handguards Mounts

Hand Guard Wind Covers

These Hand Guard Wind Covers offer additional wind protection and good looks for your snowmobile.

• Semi-rigid design, black color

• Can be installed directly onto your bare handlebars

• Features Yamaha logo

Trailerable Cover

Protects unit during trailering and storage.

• Strong, pre-shrunk, two-ply army duck canvas resists water and mildew

• Soft, cotton canvas conforms to the unit while keeping moisture away

Part numbers

SMA-09HGC-BK-00 Black

Part numbers

SMA-8NU29-00-00 Black

Rear Skid Plate

The Rear Skid Plate gives full coverage protection for your clutch, exhaust, and chain case components.

• May not be exactly as shown in the photo.

Part numbers

SMA-8NU34-00-00 Black

Spot Light Kit

Enhances sight in low-light conditions with LED technology.

• Powerful spot light

• Easy installation with included hardware

• Easy installation using strong ThreeBond® adhesive for a permanent mount

• Powerful LED spot light with 18 LEDs

• Easy installation

• Ram mount with U bolt for rail mount included

• 12 volt output socket included

• Rubber ball absorbs shock and vibration

• Easily detachable from ram mount

• Weather-resistant rubber body shield

• On/off switch on the light

• Length of power cord is 125 cm-175 cm

• 30 degrees beam

• Frosted lens

• 9 watts

• 1900 lumens

• 4500K colour temp

12V DC Plug

Allows power take off for 12V electrical accessories.

• Corrosion resistant and marine grade construction

• Patented moisture resistant sealing ring

• LED indicator light

• Internal 10A fuse

2UP Seat Kit

Convert your snowmobile to allow you to carry a passenger.

• Matches the unit design.

Part numbers

ABA-2HR35-10-00 Black

Optional parts

ATV-12VPK-00-KT 12V DC Plug

Part numbers

ATV-12VPK-00-KT Black

Required parts

ABA-2HR35-10-00 Spot Light Kit

Optional parts

ABA-2HR35-10-00 Spot Light Kit

Part numbers

SMA-8NU49-00-00 Black

2UP Transporter Lite Cover

The cover protects your unit from the elements during trailering or storage. Back-coated with urethane, it provides an excellent barrier to the elements and road grime.

• Made of premium SurLast® polyester fabric, which is very UV, and colour stable.

• Has an expandable windshield panel which will accommodate the taller accessory windshields.

• May not be exactly as shown on the picture.

Snowmobile High-Performance Suspension Grease. The best snowmobile grease for usage on advanced suspension systems, when needing to react quickly to rough trail conditions.

• Provides extensive protection and wear resistance

• Low temperature protection down to -65°F and yet protection up to 250°F

• Product should be used where service manual indicates ESSO Beacon 325 or Aeroshell Grease

Super Sport Caddy Set

Caddy Set to move around easily your snowmobile.

• Constructed of lightweight, reinforced, multi-ribbed, injection-molded plastic

• Features twin wheel casters for greater stability

• Equipped with non-slip Hydro Turf® inserts

Metric Tool Kit

Comprehensive tool set that prepares you for just about anything the road will throw at you.

• Includes ring and open end combination spanners 8, 10, 12 & 14, an adjustable spanner, Vice Grips, 4 way Phillips and flat screwdrivers, sparkplug spanner and gap guage

• Includes also a roll of black electrical tape, tyre pressure gauge, cable ties, wire, rag and #3, 4, 5 & 6 Allen keys

• Comes in a compact roll-up pouch

• Can easily be stowed away in your saddlebag, side case, top case, etc.

Part numbers

SMA-8NX29-00-00 Black

Part numbers

ACC-SMBGR-SE-14 Black

Part numbers

SMA-CADDY-SC-BL Blue

Part numbers

ABA-METRC-00-00 Black

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With EU-plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety: spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Part numbers

YME-YEC09-EU-20 Black

Part numbers

YME-YEC01-EU-00 Black

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With UK plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety; spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers to fit our range of motorcycles, scooters, ATV, SMB and other products

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Disclaimer

Applicable to UK markets only

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Part numbers

YME-YEC09-UK-00 Black

Part numbers

YME-YEC01-UK-00 Black

SRX 120

TRIC™ Ice Scratchers

The kit provides additional snow spray in hard-packed icy conditions to help reduce rear suspension hyfax wear and engine overheating. It creates a steady stream of ice crystals to provide both lubrication for the rear skid frame and additional cooling to the heat exchangers on liquid-cooled machines. Features stainless steel cables and adapters which can be rotated to allow for left or right applications. Also includes stainless steel hardware with universal mounting brackets.

• Includes 1/4” threaded replaceable carbide stud

• Allows operation of the reverse gear

• Sold in pairs

TRIC™ Ice Scratchers - Replacement Studs

The kit contains replacement studs for the TRIC™ Ice Scratchers.

• Uses common 1/4” thread

Part numbers

SMA-ICESC-02-ST Blue

Running Board Grips

Allows maximum grip in all snow conditions.

• Adds additional rows of grip to edges of both running board and centre section

Part numbers

SMA-ICESC-CB-AP Aluminium

Part numbers

SMA-8ML57-00-BK Black

Snowmobile Handguards Mounts

Made of sturdy plastic, this mounting kit is necessary for the installation of the snowmobile handguards: SMA-8LYHG-00BK (sold separately)

• Sold in pairs

Part numbers

SMA-8LYMT-00-00 Black

Required parts

SMA-8LYHG-00-BK Snowmobile Handguards

Snowmobile Handguards

Stylised protection for your hands from the chilling winds

• Sold in pairs

• Requires Mounting Hardware: Part #SMA8LYMT-00-00 (sold separately)

Part numbers

SMA-8LYHG-00-BK Black

Required parts

SMA-8LYMT-00-00 Snowmobile Handguards Mounts

Spot Light Kit

Enhances sight in low-light conditions with LED technology.

• Powerful spot light

• Easy installation with included hardware

• Easy installation using strong ThreeBond® adhesive for a permanent mount

• Powerful LED spot light with 18 LEDs

• Easy installation

• Ram mount with U bolt for rail mount included

• 12 volt output socket included

• Rubber ball absorbs shock and vibration

• Easily detachable from ram mount

• Weather-resistant rubber body shield

• On/off switch on the light

• Length of power cord is 125 cm-175 cm

• 30 degrees beam

• Frosted lens

• 9 watts

• 1900 lumens

• 4500K colour temp

12V DC Plug

Allows power take off for 12V electrical accessories.

• Corrosion resistant and marine grade construction

• Patented moisture resistant sealing ring

• LED indicator light

• Internal 10A fuse

Part numbers

ABA-2HR35-10-00 Black

Optional parts

ATV-12VPK-00-KT 12V DC Plug

Part numbers

ATV-12VPK-00-KT Black

Required parts

ABA-2HR35-10-00 Spot Light Kit

Optional parts

ABA-2HR35-10-00 Spot Light Kit

Medium Height Windshield Provides improved wind and snow protection for taller riders or those who prefer a more upright riding position.

• Customize the look of your snowmobile

• Made of a high-quality polycarbonate

• Mounted above the console

• 6.4” in size

Tall Windshield Offers significant increase in wind protection.

• Customize the look of your snowmobile

• Helps deflect snow and wind from rider

• Made of a high-quality polycarbonate

• Mounted above the console

• Clear colored, 13.3” in size

Custom Cover for the SRX 121 Protects the unit during trailering or storage.

• Expandable windshield panel for accommodating taller accessory windshields

• Cotton canvas is naturally very soft on the finish of the unit

• Vents moisture away

• Strong, preshrunk, waterproof two-ply army duck canvas

• Add Undercover Protector to protect windshield and shroud area, sold separately

Snowmobile High-Performance Suspension Grease.

The best snowmobile grease for usage on advanced suspension systems, when needing to react quickly to rough trail conditions.

• Provides extensive protection and wear resistance

• Low temperature protection down to -65°F and yet protection up to 250°F

• Product should be used where service manual indicates ESSO Beacon 325 or Aeroshell Grease

Part numbers

SMA-8ML96-20-00 Transparent

Part numbers

SMA-8ML96-30-00 Transparent

Part numbers

SMA-8MV29-00-00 Black

Part numbers

ACC-SMBGR-SE-14 Black

Super Sport Caddy Set

Caddy Set to move around easily your snowmobile.

• Constructed of lightweight, reinforced, multi-ribbed, injection-molded plastic

• Features twin wheel casters for greater stability

• Equipped with non-slip Hydro Turf® inserts

Metric Tool Kit

Comprehensive tool set that prepares you for just about anything the road will throw at you.

• Includes ring and open end combination spanners 8, 10, 12 & 14, an adjustable spanner, Vice Grips, 4 way Phillips and flat screwdrivers, sparkplug spanner and gap guage

• Includes also a roll of black electrical tape, tyre pressure gauge, cable ties, wire, rag and #3, 4, 5 & 6 Allen keys

• Comes in a compact roll-up pouch

• Can easily be stowed away in your saddlebag, side case, top case, etc.

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With EU-plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety: spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Part numbers

SMA-CADDY-SC-BL Blue

Part numbers

ABA-METRC-00-00 Black

Part numbers

YME-YEC09-EU-20 Black

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With UK plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety; spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers to fit our range of motorcycles, scooters, ATV, SMB and other products

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Disclaimer

Applicable to UK markets only

Part numbers

YME-YEC01-EU-00 Black

Part numbers

YME-YEC09-UK-00 Black

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Part numbers

YME-YEC01-UK-00 Black

SnoScoot ES

Deluxe Tunnel Bag

Pack a snack and extra essentials for that long or short ride.

• Semi-rigid bag

• Easily removable

Part numbers

SMA-8JX63-00-00 Black

Handlebar Bag

Add some convenient storage to your snowmobile with this multi-compartment handlebar bag.

• Durable, weather-resistant nylon

• Accent material in 800-denier nylon

• Mounted by using both the handlebar and handlebar risers

Heavy-Duty Suspension Springs

Upgrade your suspension with stiffer springs designed to resist bottoming.

• Includes two rear torsion springs

• Includes two ski shock springs

Part numbers

SMA-8ML21-00-00 Black

Part numbers

SMA-8ML35-00-00 Black

Carbide Runner Set

Direct replacement of the original runner to improve the overall handling of the snowmobile.

• 2”

• Sold in pairs

Part numbers

SMA-8ML31-02-00 Black

TRIC™ Ice Scratchers

The kit provides additional snow spray in hard-packed icy conditions to help reduce rear suspension hyfax wear and engine overheating. It creates a steady stream of ice crystals to provide both lubrication for the rear skid frame and additional cooling to the heat exchangers on liquid-cooled machines. Features stainless steel cables and adapters which can be rotated to allow for left or right applications. Also includes stainless steel hardware with universal mounting brackets.

• Includes 1/4” threaded replaceable carbide stud

• Allows operation of the reverse gear

• Sold in pairs

TRIC™ Ice Scratchers - Replacement Studs

The kit contains replacement studs for the TRIC™ Ice Scratchers.

• Uses common 1/4” thread

Part numbers

SMA-ICESC-02-ST Blue

Running Board Grips

Allows maximum grip in all snow conditions.

• Adds additional rows of grip to edges of both running board and centre section

Part numbers

SMA-ICESC-CB-AP Aluminium

Part numbers

SMA-8ML57-00-BK Black

Snowmobile Handguards Mounts

Made of sturdy plastic, this mounting kit is necessary for the installation of the snowmobile handguards: SMA-8LYHG-00BK (sold separately)

• Sold in pairs

Part numbers

SMA-8LYMT-00-00 Black

Required parts

SMA-8LYHG-00-BK Snowmobile Handguards

Snowmobile Handguards

Stylised protection for your hands from the chilling winds

• Sold in pairs

• Requires Mounting Hardware: Part #SMA8LYMT-00-00 (sold separately)

Part numbers

SMA-8LYHG-00-BK Black

Required parts

SMA-8LYMT-00-00 Snowmobile Handguards Mounts

Spot Light Kit

Enhances sight in low-light conditions with LED technology.

• Powerful spot light

• Easy installation with included hardware

• Easy installation using strong ThreeBond® adhesive for a permanent mount

• Powerful LED spot light with 18 LEDs

• Easy installation

• Ram mount with U bolt for rail mount included

• 12 volt output socket included

• Rubber ball absorbs shock and vibration

• Easily detachable from ram mount

• Weather-resistant rubber body shield

• On/off switch on the light

• Length of power cord is 125 cm-175 cm

• 30 degrees beam

• Frosted lens

• 9 watts

• 1900 lumens

• 4500K colour temp

Engine Stop Tether

Stops the engine in the event of separation from your snowmobile.

• End of tether attaches to jacket D-ring

Part numbers

ABA-2HR35-10-00 Black

Optional parts

ATV-12VPK-00-KT 12V DC Plug

Part numbers

SMA-8ML81-00-00 Red

12V DC Plug

Allows power take off for 12V electrical accessories.

• Corrosion resistant and marine grade construction

• Patented moisture resistant sealing ring

• LED indicator light

• Internal 10A fuse

Medium Height Windshield

Provides improved wind and snow protection for taller riders or those who prefer a more upright riding position.

• Customize the look of your snowmobile

• Made of a high-quality polycarbonate

• Mounted above the console

• 6.4” in size

Tall Windshield Offers significant increase in wind protection.

• Customize the look of your snowmobile

• Helps deflect snow and wind from rider

• Made of a high-quality polycarbonate

• Mounted above the console

• Clear colored, 13.3” in size

Snowmobile High-Performance Suspension Grease. The best snowmobile grease for usage on advanced suspension systems, when needing to react quickly to rough trail conditions.

• Provides extensive protection and wear resistance

• Low temperature protection down to -65°F and yet protection up to 250°F

• Product should be used where service manual indicates ESSO Beacon 325 or Aeroshell Grease

Part numbers

ATV-12VPK-00-KT Black

Required parts

ABA-2HR35-10-00 Spot Light Kit

Optional parts

ABA-2HR35-10-00 Spot Light Kit

Part numbers

SMA-8ML96-20-00 Transparent

Part numbers

SMA-8ML96-30-00 Transparent

Part numbers

ACC-SMBGR-SE-14 Black

Super Sport Caddy Set

Caddy Set to move around easily your snowmobile.

• Constructed of lightweight, reinforced, multi-ribbed, injection-molded plastic

• Features twin wheel casters for greater stability

• Equipped with non-slip Hydro Turf® inserts

Metric Tool Kit

Comprehensive tool set that prepares you for just about anything the road will throw at you.

• Includes ring and open end combination spanners 8, 10, 12 & 14, an adjustable spanner, Vice Grips, 4 way Phillips and flat screwdrivers, sparkplug spanner and gap guage

• Includes also a roll of black electrical tape, tyre pressure gauge, cable ties, wire, rag and #3, 4, 5 & 6 Allen keys

• Comes in a compact roll-up pouch

• Can easily be stowed away in your saddlebag, side case, top case, etc.

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With EU-plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety: spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Part numbers

SMA-CADDY-SC-BL Blue

Part numbers

ABA-METRC-00-00 Black

Part numbers

YME-YEC09-EU-20 Black

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

YEC-9 Battery Charger

6-step charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products.

• With UK plug

• Unique battery charging technology. Fully automatic switch mode charger that analyses the state of the battery, charges and automatically switches to maintenance charging when ready

• Designed for safety; spark-free, protected from reverse polarity connections and short-circuit proof

• Light and compact; handy and easy to store

• Specially tested and approved by Yamaha service engineers to fit our range of motorcycles, scooters, ATV, SMB and other products

• Includes battery testing and float maintenance

• Identifies fault battery

• Ensures full charge to prolong battery life time

• Based on CTEK’s test winning charger platform

• Combine it with the YEC quick connectors - the Built-in Panel Plug, Charger Indicator and Indicator Panel 150 - for reading the charge condition of your battery and/or for easier access between your Yamaha’s battery and the YEC-8 charger

Disclaimer

Applicable to UK markets only

Part numbers

YME-YEC01-EU-00 Black

Part numbers

YME-YEC09-UK-00 Black

Battery Charger CTEK CS ONE

Charger for all types of batteries. New durable design to make it easy to handle, with unique mounting system on the back for quick connection to CS accessories. It can be left safely connected for long periods during maintenance charging.

• Recond option to restore and recondition lead-acid batteries

• 12V supply to support the battery during service work and retain contact power to the vehicle during battery replacement / removal

• Wake up option to revive seemingly dead lithium and lead-acid batteries

• Advanced settings to monitor charger voltage & amperage

Part numbers

YME-YEC01-UK-00 Black

www.yamaha-motor.eu

follow us on: Yamaha

Tel: + 31 20 654 6000

Disclaimer

Always wear a helmet, eye protection and protective clothing when riding any type of powered vehicle. Yamaha encourages you to ride safely and respect fellow riders and the environment. All information in this brochure/catalogue is given for general guidance. Specifications, prices and/ or appearance of Yamaha products and non Yamaha branded products are subject to change without prior notice. Non Yamaha branded products as depicted in this brochure/catalogue are fully developed and produced by respected third parties. Yamaha does not guarantee the availability of the displayed products in local markets. The product range may be limited in some countries and Yamaha has the right to discontinue products without prior notice. Where applicable, prices of Yamaha products may vary according to local requirements and conditions. No rights can be obtained from this information. Sizes of the apparel displayed are indicative – Yamaha recommends you to visit your local Yamaha dealer for the best fit. For further details and availability, please contact your local Yamaha dealer.

Dealer