Batteries

Batteries | Important instructions

Film strip

The battery is isolated by a firm strip. To activate the lock, the film strip is pulled out. The system and the RFID field are now activated. The locks can discharge each other if they are too close to each other (see page 07). Attention: It is essential to pull off the film strip before closing the cabinet door.

Battery change

Always use a new battery when changing. Battery type Panasonic Industry CR123A (1550mA h) was tested with the lock. Insert the battery into the battery compartment with the correct polarity (see photo). The system and the RFID field are then activated. The locks can discharge each other if they are too close to each other (see page 07). Attention: During transport, the lock should be unlocked and there should be no battery in the lock. Isolation with a film strip is also possible.