Fingerboard Tips & Tricks: How to Ollie on a Fingerboard - XFlippro

FI NG ERBOARD TI PS & TR I C KS

HOW TO OLLIE ON A FINGERBOARD x fl i p p ro.co m

ABOUT XFLIPPRO As an advanced product brand, XFLIPPRO is a modern fingerboard brand with various design styles. In order to better integrate art and fingerboard, XFLIPPRO has collaborated with multiple designers, committed to not only satisfying the performance of skateboards but also creating an art collection.

On our website, we customize the manual fingerboard according to the customer's unique design and needs.

At the same time, we also have limited designer fingerboard sets on the website for sale, with a high collection value.

Table of Content • • • •

FINGER PLACEMENT KICK THE FINGERBOARD UP GET THE FINGERBOARD UP TO 80 DEGREES ANGLE. FLICK THE FRONT FINGER AND WRIST UP AND FORWARD • LEVEL THE FINGERBOARD IN THE AIR • LAND THE FINGERBOARD • CONTACT INFORMATION

FINGER PLACEMENT • Place your index finger in the middle of the board and between the plate nails, while placing your middle finger on the tail.

• Note: range of finger placed on the board is limited to the upper two joints, and the third joint must not be placed on the board surface.

KICK THE FINGERBOARD UP • The direction to push the finger board is important, especially for beginners.

Remember, the fingerboard is to slide back first, give the fingerboard a force, then the middle finger force, point the table.

• At this time the board head is upturned, turn the wrist, let the board turn over, support on two fingers, this process the board is always sliding back.

GET THE FINGERBOARD UP TO 80 DEGREES ANGLE. • Slide the fingerboard backward, press down the middle finger, use the rear wheel as the fulcrum, tilt the head of the fingerboard, and rise the index finger and the board.

• Keep 80 degrees, The harder you slide back, the greater the force. Turn your wrist, use your index finger as a fulcrum, and retract your middle finger.

FLICK THE FRONT FINGER AND WRIST UP AND FORWARD • Since that fingerboard is in a vertical position after popping, moving the index finger upward toward the nose will raise the fingerboard for ventilation.

• A good technique is to focus on the movement of the entire hand and wrist, rather than on moving the index finger alone.

LEVEL THE FINGERBOARD IN THE AIR • to keep the board level, turn your wrist horizontal again, while letting your middle finger control the tail of the board.

• After that press hard on the back so that the board can fly in the air. This time you need to act fast because gravity will quickly send the fingerboard back to the surface.

• This technique will return the fingerboard to its four wheels.

LAND THE FINGERBOARD • At the end, press the board downward, and the wheel will land. A perfect Ollie will be completed.

• After leaning the Ollie, you can try to ollie over gaps and obstacles. It is a good start to start the learning of other techniques.

Email Address info@xflippro.com

Website https://xflippro.com

CONTACT INFORMATION

Check out complete tutorial at https://xflippro.com/blogs/news/fi ngerboard-tips-for-learning-ollie