John Deere 903KH, 909KH Tracked Harvester Operation,Diagnostic Test Service Manual TM11623

903KH and 909KH Tracked Harvester Diagnostic

OPERATION AND TEST MANUAL Track models 903KH, 909KH TM11623 26 FEB 15 (ENGLISH)

For complete service information also see: 903KH and 909KH Tracked Harvester Repair

TM11626

JDLink (MTG) Technical Manual

TM114519

Alternators and Starting Motors

CTM77

PowerTech 9.0L OEM Diesel Engines 6090 Tier 3 / Stage IIIA Emissions Certified Base Engine Repair

CTM400

PowerTech 6090 Diesel Engine Level 14 ElectronicFuel System with the Denso CTM385 High Pressure Common Rail (HPCR) Level 14 ECU Super Caddy Oil Cleanup Procedure

CTM310

120 Series Hydraulic Cylinders

CTM120519

120 Series Hydraulic Cylinders

CTM114319

COOLANT HEATER SERVICE MANUAL

CTM10090X19

JDLINK/ZXLINK Machine Monitoring System

CTM10006

John Deere Construction and Forestry Pinted by Belgreen

TM11623-OPERATION AND TEST MANUAL

(g) by Belgreen v2.5

Table of contents FOREWORD Section 9000 - GENERAL INFORMATION Group 01. - Safety Section 9001 - DIAGNOSTICS Group 20 - Engine Control Unit (ECU) Diagnostic Trouble Codes Group 30 - Advanced Display Unit (ADU) Diagnostic Trouble Codes Group 40 - Sealed Switch Module (SSM) Diagnostic Trouble Codes Group 50 - Cab Control Unit (CCU) Diagnostic Trouble Codes Group 60 - Transmission Control Unit (TCU) Diagnostic Trouble Codes Group 70 - Hydraulic Control Unit (HCU) Diagnostic Trouble Codes Section 9005 - OPERATIONAL CHECKOUT PROCEDURE Group 10 - Operational Checkout Procedure Section 9010 - ENGINE Group 05 - Theory of Operation Group 15 - Diagnostic Information Group 25 - Tests Section 9015 - ELECTRICAL SYSTEM Group 05 - System Information Group 10 - System Diagrams Group 15 - Sub-System Diagnostics Group 16 - Monitor Operation Group 20 - References Section 9020 - POWER TRAIN Group 05 - Theory of Operation Group 15 - Diagnostic Information Section 9025 - HYDRAULIC SYSTEM Group 05 - Theory of Operation Group 15 - Diagnostic Information Group 25 - Tests Section 9031 - HEATING AND AIR CONDITIONING Group 05 - Theory of Operation Group 15 - Diagnostic Information Group 25 - Tests

<- Go to Global Table of contents

TM11623-OPERATION AND TEST MANUAL

<- Go to Global Table of contents

TM11623-OPERATION AND TEST MANUAL

GENERAL INFORMATION

(g) by Belgreen v2.0

Foreword This manual is written for an experienced technician. Essential tools required in performing certain service work are identified in this manual and are recommended for use.

Live with safety: Read the safety messages in the introduction of this manual and the cautions presented throughout the text of the manual.

CAUTION: This is the safety-alert symbol. When you see this symbol on the machine or in this manual, be alert to the potential for personal injury.

Technical manuals are divided in two parts: repair and operation and tests. Repair sections tell how to repair the components.

Operation and tests sections help you identify the majority of routine failures quickly.

Information is organized in groups for the various components requiring service instruction. At the beginning of each group are summary listings of all applicable essential tools, service equipment and tools, other materials needed to do the job, service parts kits, specifications, wear tolerances, and torque values.

Technical Manuals are concise guides for specific machines. They are on-the-job guides containing only the vital information needed for diagnosis, analysis, testing, and repair.

Fundamental service information is available from other sources covering basic theory of operation, fundamentals of troubleshooting, general maintenance, and basic type of failures and their causes.

<- Go to Section TOC

Section 9000 page 1

TM11623-OPERATION AND TEST MANUAL

TM11623-OPERATION AND TEST MANUAL

(g) by Belgreen v2.5

Section 9000 - GENERAL INFORMATION Table of contents Group 01. - Safety .................................................................................................................................... 1 Information for European Union Directives Compliance ....................................................................... 1 Recognize Safety Information ............................................................................................................... 3 Follow Safety Instructions ..................................................................................................................... 4 Operate Only If Qualified ...................................................................................................................... 5 Wear Protective Clothing ...................................................................................................................... 6 Avoid Unauthorized Machine Modifications .......................................................................................... 6 Inspect Machine ................................................................................................................................... 6 Stay Clear of Moving Parts ................................................................................................................... 7 Avoid High-Pressure Oils ...................................................................................................................... 7 Avoid High-Pressure Fluids ................................................................................................................... 8 Work In Ventilated Area ........................................................................................................................ 8 Handle Starting Fluid Safely ................................................................................................................. 9 Prevent Fires ........................................................................................................................................ 9 In Case of Machine Fire ...................................................................................................................... 10 Prevent Battery Explosions ................................................................................................................. 10 Handle Chemical Products Safely ....................................................................................................... 11 Dispose of Waste Properly .................................................................................................................. 11 Prepare for Emergencies .................................................................................................................... 12 Clean Debris from Machine ................................................................................................................ 12 Control Pattern ................................................................................................................................... 13 Use Steps and Handholds Correctly ................................................................................................... 13 Start Only From Operator′s Seat ......................................................................................................... 13 Use and Maintain Seat Belt ................................................................................................................ 14 Avoid Work Site Hazards .................................................................................................................... 14 Prevent Unintended Machine Movement ............................................................................................ 16 Operate Machine Safely ..................................................................................................................... 17 Avoid Machine Tip Over ...................................................................................................................... 19 Keep Riders Off Machine .................................................................................................................... 20 Use Care When Swinging Machine ..................................................................................................... 20 Operate Hoist (Boom) With Care ........................................................................................................ 21 Avoid Backover Accidents .................................................................................................................. 21 Operating On Slopes ........................................................................................................................... 21 Add and Operate Attachments Safely ................................................................................................ 22 Travel Safely ....................................................................................................................................... 22 Avoid Power Lines .............................................................................................................................. 22 Operating or Traveling On Public Roads ............................................................................................. 23 Inspect and Maintain ROPS ................................................................................................................. 23 Park and Prepare for Service Safely ................................................................................................... 24 Service Machines Safely ..................................................................................................................... 24 Service Cooling System Safely ........................................................................................................... 25 Service Accumulator Systems Safely .................................................................................................. 25 Remove Paint Before Welding or Heating ........................................................................................... 26 Make Welding Repairs Safely ............................................................................................................. 26 Drive Metal Pins Safely ....................................................................................................................... 27

<- Go to Global Table of contents

TM11623-OPERATION AND TEST MANUAL

Section 9000 - GENERAL INFORMATION

Group 01.: Safety

Group 01. - Safety Information for European Union Directives Compliance To the Customer Effective June, 1998, all machines sold in the European Union must comply with the machinery directive 98/37/EC and any amendments. Each machine meeting these requirements must bear the conformity mark CE. In addition, each machine must be accompanied with a Declaration of Conformity by the machine manufacturer. This declaration must be kept with the machine at all times and does not declare conformity to national road regulations. →NOTE: This machine may need country approval for travel on public roads in Europe as some European countries require special equipment and approvals.

Sound and Vibration Specifications [1] - Sound levels: The operator sound pressure levels for the 903KH and 909KH are 71 dB(A) or less with properly maintained machines.

Sound levels were obtained using the test method specified per ISO 6394:2008.

[2] - Vibration levels: The operator vibration levels for the 903KH and 909KH with properly maintained machines operating on a flat dirt area free of large objects such as trees and rocks are: • Whole Body: 0.31 m/s 2 or less Vibration levels were obtained using the test method specified per ISO 2631-1:1997.

Product Identification Number (PIN), CE Mark, and EU Flex Label Locations

<- Go to Section TOC

Section 9000 page 1

TM11623-OPERATION AND TEST MANUAL

Section 9000 - GENERAL INFORMATION

Group 01.: Safety

PIN Plate and CE Mark Location LEGEND: 1 PIN Plate Location 2 CE Mark and EU Flex Label Location The machine is identified by the PIN that is stamped on a serial number plate. The PIN plate (1), CE mark, and EU flex label (2) are located in the middle section of the machine.

<- Go to Section TOC

Section 9000 page 2

TM11623-OPERATION AND TEST MANUAL

Section 9000 - GENERAL INFORMATION

Group 01.: Safety

PIN Plate

CE Mark Plate — * Shows year of manufacture

EU Flex Label

<- Go to Section TOC

Section 9000 page 3

TM11623-OPERATION AND TEST MANUAL

Section 9000 - GENERAL INFORMATION

Group 01.: Safety

Recognize Safety Information

Safety Alert Symbols

Safety Alert Symbols This is the safety alert symbol. When you see this symbol on your machine or in this manual, be alert for the potential of personal injury.

Follow the precautions and safe operating practices highlighted by this symbol.

A signal word — DANGER, WARNING, or CAUTION — is used with the safety alert symbol. DANGER identifies the most serious hazards.

On your machine, DANGER signs are red in color, WARNING signs are orange, and CAUTION signs are yellow. DANGER and WARNING signs are located near specific hazards. General precautions are on CAUTION labels.

Follow Safety Instructions

Safety Messages Carefully read all safety messages in this manual and on your machine safety signs. Keep safety signs in good condition.

Replace missing or damaged safety signs. Be sure new equipment components and repair parts include the current safety signs. Replacement safety signs are available from your John Deere dealer.

There can be additional safety information contained on parts and components sourced from suppliers that is not reproduced in this operator′s manual.

Learn how to operate the machine and how to use controls properly. Do not let anyone operate without instruction. <- Go to Section TOC

Section 9000 page 4

TM11623-OPERATION AND TEST MANUAL

Section 9000 - GENERAL INFORMATION

Group 01.: Safety

Keep your machine in proper working condition. Unauthorized modifications to the machine may impair the function and/or safety and affect machine life.

If you do not understand any part of this manual and need assistance, contact your John Deere dealer.

Operate Only If Qualified Do not operate this machine unless you have read the operator′s manual carefully and you have been qualified by supervised training and instruction.

Familiarize yourself with the job site and your surroundings before operating. Try all controls and machine functions with the machine in an open area before starting to work.

Know and observe all safety rules that may apply to your work situation and your work site.

<- Go to Section TOC

Section 9000 page 5

TM11623-OPERATION AND TEST MANUAL