John Deere S540, S550, S660, S670, S680, S690 Combine Manual TM805419 - PDF DOWNLOAD

S540, S550, S660, S670, S680 and S690 Combines Diagnostic (SN. 120100—)

DIAGNOSTIC TECHNICAL MANUAL S540, S550, S660, S670, S680 and S690 Combines (SN. 120100—) TM805419 01DEC18 (ENGLISH)

For complette service information also see: S650 STS, S660 STS, S670 STS, S680 STS S685 STS & S690 STS Combine Repair (Worldwide Edition)..................tm120819

John Deere Horizontina

Introduction Foreword routine failures quickly.

Operation and tests sections help you identify the majority of

This manual is written for an experienced technician. Essential Information is organized in groups for the various components tools required in performing certain service work are identified in requiring service instruction. At the beginning of each group are this manual and are recommended for use.summarylistingsofallapplicableessentialtools,service equipment and tools, other materials needed to do the job, Live with safety: Read the safety messages in the introduction of service parts kits, specifications, wear tolerances, and torque this manual and the cautions presented throughout the text of the values. manual.

Technical Manuals are concise guides for specific machines.

They are on-the-job guides containing only the vital information CAUTION:needed for diagnosis, analysis, testing, and repair.

This is the safety-alert symbol. When you see this symbol on the Fundamental service information is available from other sources machine or in this manual, be alert to the potential for personal covering basic theory of operation, fundamentals of injury. troubleshooting, general maintenance, and basic type of failures and their causes.

Technical manuals are divided in two parts: repair and operation DX,TMIFC-19-20140415 and tests. Repair sections tell how to repair the components.

TM805419 (01.12.2018)

S540, S550, S660, S670, S680 and S690 Combines

Contents

Section 210 - GeneralGroup20A-TheoryofOperation-Cab/Operator`s

Group 05 - SafetyStation

Group 10 - Combine and Component IdentificationGroup20C-TheoryofOperation-AgManagement Group 15 - General SpecificationsSolutions Group 20 - Diagnostic and Testing ProceduresGroup 20D - Theory of Operation - Lighting Group 20E - Theory of Operation - Engine/Fuel

Section 211 - Diagnostic Trouble CodesGroup20F-TheoryofOperation-Starting/Charging/

Group1-AccessingDiagnosticCodesandPower Distribution Addresses Group 20G - Theory of Operation - Header Group 2 - ATC - Diagnostic Trouble CodesFunctions Group 3 - AYM - Diagnostic Trouble CodesGroup 20H - Theory of Operation - Feeder House Group 4 - CAB - Diagnostic Trouble CodesGroup20I-TheoryofOperation-Threshing/ Group 5 - CRU - Diagnostic Trouble CodesSeparating/Cleaning Group 6 - CSM - Diagnostic Trouble CodesGroup20J-TheoryofOperation-GrainTank/ Group 7 - ECU - Tier 2 and Tier 3 Engines - Diagnostic Unloading Trouble CodesGroup20K-TheoryofOperation-Residue Group 8 - EIC - Diagnostic Trouble CodesSystem Group 10 - GLM - Diagnostic Trouble CodesGroup20L-TheoryofOperation-Transmission/ Group 11 - JDL - Diagnostic Trouble CodesGround Drive Systems Group 12 - LC1 - Diagnostic Trouble CodesGroup20M-TheoryofOperation-HydraulicOil/ Group 13 - LC2 - Diagnostic Trouble CodesPressure Group 14 - MHC - Diagnostic Trouble CodesGroup 20N - Theory of Operation - Main Gearcase Group 15 - PDU - Diagnostic Trouble CodesGroup 20O - Theory of Operation - Brakes Group 16 - PTP - Diagnostic Trouble CodesGroup 20P - Theory of Operation - Chassis Group 17 - RC1 - Diagnostic Trouble CodesGroup20Q-TheoryofOperation-AirCompressor Group 18 - RC2 - Diagnostic Trouble CodesSystem Group 19 - SCL - Diagnostic Trouble CodesGroup 30A - Schematics - Cab/Operators Station Group 20 - SFC - Diagnostic Trouble CodesGroup30C-Schematics-AgManagement Group 21 - SSU - Diagnostic Trouble CodesSolutions Group 22 - VTi - Diagnostic Trouble CodesGroup 30D - Schematics - Lighting Group 23 - XMC - Diagnostic Trouble CodesGroup 30E - Schematics - Engine/Fuel Group 24 - XSC - Diagnostic Trouble CodesGroup30F-Schematics-Starting/Charging/Power Distribution

Section 212 - Observable SymptomsGroup 30G - Schematics - Header Functions

Group 230 - Air Intake and Cooling SystemsGroup 30H - Schematics - Feeder House Group 240 - Electrical SystemGroup30I-Schematics-Threshing/Separating/ Group 245 - Electronic Control UnitsCleaning Group 250A - Drives - (S540, S550, S660, S670)Group 30J - Schematics - Grain Tank/Unloading Group 250B - Drives - (S680)Group 30K - Schematics - Residue System Group 260A - Steering and Brakes - (S540, S550, Group 30L - Schematics - Transmission/Ground Drive S660, S670)Systems Group 260B - Steering and Brakes - (S680)Group 30M - Schematics - Hydraulic Oil/Pressure Group270A-HydraulicSystem-(S540,S550,S660,Group 30N - Schematics - Main Gearcase S670)Group 30O - Schematics - Brakes Group 270B - Hydraulic System - (S680)Group 30P - Schematics - Chassis Group 280A - Main Gearcase - (S540, S550, S660, Group30Q-Schematics-AirCompressorSystem S670)Group 50A - Diagnostics - Cab/Operator`s Station Group 280B - Main Gearcase - (S680)Group50C-Diagnostics-AgManagement Group 290 - Cab/Open Operator StationSolutions Group 50D - Diagnostics - Lighting

Section 220 - Engine SystemGroup 50E - Diagnostics - Engine/Fuel Distribution

Group 20 - Engine SystemsGroup50F-Diagnostics-Starting/Charging/Power

Section 230 - Air Intake and Cooling SystemGroup 50G - Diagnostics - Header Functions

Group 20 - Theory of OperationGroup 50H - Diagnostics - Feeder House Group 30 - SchematicsGroup50I-Diagnostics-Threshing/Separating/ Group 50 - DiagnosticsCleaning Group 50J - Diagnostics - Grain Tank/Unloading

Section239-AirIntakeandCoolingSystemGroup 50K - Diagnostics - Residue System - ComponentsGroup50L-Diagnostics-Transmission/GroundDrive Systems

Section 240 - Electrical SystemGroup 50M - Diagnostics - Hydraulic Oil/Pressure Group 50N - Diagnostics - Main Gearcase Group 5A - General Information Group 50O - Diagnostics - Brakes Group 10A - General References Group 50P - Diagnostics - Chassis Group 10B - Calibration Procedures

TM805419 (01.12.2018)

S540, S550, S660, S670, S680 and S690 Combines

Group50Q-Diagnostics-AirCompressorSystem

Section 245 - Electronic Control Units Group 05 - Electronic Control Units - Summary of References Group 10A - Accessing Diagnostic Trouble Codes and Addresses Group 10B - Diagnostic Addresses by Control Unit Group 20 - Theory of Operation Group 30 - Schematics Group 50 - Diagnostics

Section 249 Components

-

Electrical

Connector

-

Section 250A - Drives - (S540, S550, S660 and S670) Section 250B - Drives - (S680 and S690) Section 259 - Drives - Components Section 260A - Steering and Brakes - (S540, S550, S660, S670) Group 10A - Preliminary & Operational Checks Group 10D - Hydraulic Specifications Group 20 - Theory of Operation Group 30 - Schematics Group 50 - Diagnostics

Section 260B - Steering and Brakes - (S680 ad S690)

TM805419 (01.12.2018)

Group 10A - Preliminary & Operational Checks Group 10D - Hydraulic Specifications Group 20 - Theory of Operation Group 30 - Schematics Group 50 - Diagnostics

Section 269 Components

-

Steering

and

Brakes

-

Section 270A - Hydraulic System - (S540, S550, S660 and S670) Section 270B - Hydraulic System - (S680 and S690) Section 279 - Hydraulic System Components Section 280A - Main Gearcase - (S540, S550, S660 and S670) Section 280B - Main Gearcase - (S680 and S690) Section 289 - Main Gearcase - Components Section 290 - Cab-Open Operator`s Station Section 299 - Cab-Operator`s Station Components

S540, S550, S660, S670, S680 and S690 Combines

Section 210 Contents

General Page

Page

Interpreting Engine Serial Number........................210-10-3 Engine Serial Number...........................................210-10-3 Hydrostatic Drive Unit Pump.................................210-10-4 Hydrostatic Drive Unit Motor.................................210-10-4 Two Speed Four-Wheel Drive Motor.....................210-10-5 Engine Gearcase...................................................210-10-5 Rotor Drive Gearcase............................................210-10-5 Transmission......................................................... 210-10-5 Feeder House Reverser........................................210-10-6 Multi-Speed Feeder House Gearcase (If 210-10-6 Equipped).......................................................

Group 05 - Safety Recognize Safety Information...............................210-05-1 Handle Fluids Safely-Avoid Fires..........................210-05-1 Prepare for Emergencies.......................................210-05-1 Prevent Battery Explosions...................................210-05-2 Prevent Acid Burns................................................210-05-2 Handle Chemical Products Safely.........................210-05-2 Handle Starting Fluid Safely..................................210-05-3 Avoid High-Pressure Fluids...................................210-05-3 Park Machine Safely..............................................210-05-3 Support Machine Properly.....................................210-05-4

Chopper (If Equipped)...........................................210-10-6 Chopper Tailboard (Deluxe Residue)....................210-10-6 PowerCast Tailboard (Deluxe Residue)................210-10-7 Spreader (Deluxe Residue)...................................210-10-7

Wear Protective Clothing.......................................210-05-4 Protect Against Noise............................................210-05-4 Work in Clean Area...............................................210-05-4 Work In Ventilated Area.........................................210-05-5 Illuminate Work Area Safely..................................210-05-5 Service Machines Safely.......................................210-05-5 Construct Dealer-Made Tools Safely.....................210-05-5

Hydraulic Designators...........................................210-10-7 Hydraulic Circuit Symbols.....................................210-10-8 Group 15 - General Specifications CARB Non-road Emissions Control Warranty 210-15-2 Statement-Compression Ignition....................

Service Cooling System Safely.............................210-05-6 Service Accumulator Systems Safely....................210-05-6

EPA Non-road Emissions Control Warranty 210-15-8 Statement-Compression Ignition....................

Wait Before Opening High-Pressure Fuel 210-05-6 System...........................................................

Replace Safety Signs............................................210-05-6 Use Proper Lifting Equipment................................210-05-7 Remove Paint Before Welding or Heating.............210-05-7

Engine................................................................... 210-15-9 Electrical System...................................................210-15-10 Transmission and Brakes......................................210-15-11

Avoid Heating Near Pressurized Fluid Lines.........210-05-7 Service Tires Safely...............................................210-05-8 Avoid Harmful Asbestos Dust................................210-05-8 Practice Safe Maintenance....................................210-05-9 Use Proper Tools...................................................210-05-9 Decommissioning - Proper Recycling and Disposal 210-05-9 of Fluids and Components.............................

Live With Safety.....................................................210-05-10 Group 10 - Combine and Component Identification Interpreting Machine Serial Number......................210-10-1 Identification Numbers...........................................210-10-2 Machine Identification Plate...................................210-10-2 Machine Identification Plate Location....................210-10-2

TM805419 (01.12.2018)

Feeding................................................................. 210-15-12 Separator............................................................... 210-15-13 Discharge.............................................................. 210-15-14 Elevators and Cleaning Fan..................................210-15-15 Unloading.............................................................. 210-15-16 Turning Radius......................................................210-15-16 Weight................................................................... 210-15-16 Capacities.............................................................. 210-15-17 Dimensions............................................................ 210-15-18 Unified Inch Bolt and Screw Torque Values..........210-15-21 Metric Bolt and Screw Torque Values....................210-15-22 Group 20 - Diagnostic and Testing Procedures Troubleshooting..................................................... 210-20-1

210-1

S540, S550, S660, S670, S680 and S690 Combines

Safety

Group 05 Safety Recognize Safety Information

T81389-UN: Safety-alert symbol

This is a safety-alert symbol. When you see this symbol on your machine or in this manual, be alert to the potential for personal injury.

Follow recommended precautions and safe operating practices.

DX,ALERT-19-19980929

Handle Fluids Safely—Avoid Fires

TS227-UN: Avoid Fires

When you work around fuel, do not smoke or work near heaters or other fire hazards.

Store flammable fluids away from fire hazards. Do not incinerate or puncture pressurized containers.

Make sure machine is clean of trash, grease, and debris.

Do not store oily rags; they can ignite and burn spontaneously.

DX,FLAME-19-19980929

Prepare for Emergencies

TS291-UN: First Aid Kit

Be prepared if a fire starts.

Keep a first aid kit and fire extinguisher handy.

Keep emergency numbers for doctors, ambulance service, hospital, and fire department near your telephone.

DX,FIRE2-19-19930303

TM805419 (01.12.2018)

210-05-1

S540, S550, S660, S670, S680 and S690 Combines

Safety

Prevent Battery Explosions

TS204-UN: Battery Explosions

Keepsparks,lightedmatches,andopenflameawayfromthetop of battery. Battery gas can explode.

Never check battery charge by placing a metal object across the posts. Use a volt-meter or hydrometer.

Do not charge a frozen battery; it may explode. Warm battery to 16°C (60°F).

DX,SPARKS-19-19930303

Prevent Acid Burns

TS203-UN: Acid Burns

Sulfuric acid in battery electrolyte is poisonous. It is strong enough to burn skin, eat holes in clothing, and cause blindness if splashed into eyes.

Avoid the hazard by:

Filling batteries in a well-ventilated area.

Wearing eye protection and rubber gloves.

Avoiding breathing fumes when electrolyte is added.

Avoiding spilling or dripping electrolyte.

Use proper jump start procedure.

If you spill acid on yourself:

Flush your skin with water.

Apply baking soda or lime to help neutralize the acid.

Flush your eyes with water for 15—30 minutes. Get medical attention immediately.

If acid is swallowed:

Do not induce vomiting.

Drink large amounts of water or milk, but do not exceed 2 L (2 quarts).

Get medical attention immediately.

DX,POISON-19-19930421

Handle Chemical Products Safely

TS1132-UN: Material Safety Data Sheet

Direct exposure to hazardous chemicals can cause serious injury.

Potentially hazardous chemicals used with John Deere equipmentincludesuchitemsaslubricants,coolants,paints,and adhesives.

A Material Safety Data Sheet (MSDS) provides specific details on chemical products: physical and health hazards, safety procedures, and emergency response techniques.

Check the MSDS before you start any job using a hazardous chemical. That way you will know exactly what the risks are and how to do the job safely. Then follow procedures and recommended equipment.

(See your John Deere dealer for MSDS’s on chemical products used with John Deere equipment.)

DX,MSDS,NA-19-19930303

TM805419 (01.12.2018)

210-05-2

S540, S550, S660, S670, S680 and S690 Combines

Safety

Handle Starting Fluid Safely

TS1356-UN: Store Safely

Starting fluid is highly flammable.

Keep all sparks and flame away when using it. Keep starting fluid away from batteries and cables.

To prevent accidental discharge when storing the pressurized can, keep the cap on the container, and store in a cool, protected location.

Do not incinerate or puncture a starting fluid container.

Do not use starting fluid on an engine equipped with glow plugs or an air intake heater.

DX,FIRE3-19-20140314

Replace worn or damaged hose assemblies immediately with

Avoid High-Pressure John Deere approved replacementFluids parts.

Escaping fluid under pressure can penetrate the skin causing

serious injury.

Avoid the hazard by relieving pressure before disconnecting hydraulic or other lines. Tighten all connections before applying

pressure.

Search for leaks with a piece of cardboard. Protect hands and

body from high-pressure fluids.

If an accident occurs, see a doctor immediately. Any fluid injected into the skin must be surgically removed within a few hours or gangrene may result. Doctors unfamiliar with this type of injury should reference a knowledgeable medical source. Such information is available in English from Deere & Company Medical Department in Moline, Illinois, U.S.A., by calling

X9811-UN: High Pressure

1-800-822-8262 or +1 309-748-5636.

Inspect hydraulic hoses periodically – at least once per year – DX,FLUID-19-20111012 for leakage, kinking, cuts, cracks, abrasion, blisters, corrosion, exposed wire braid or any other signs of wear or damage.

Park Machine SafelyTS230-UN: Remove the Key Before working on the machine:

Lower all equipment to the ground.

Stop the engine and remove the key.

Disconnect the battery ground strap.

Hang a "DO NOT OPERATE" tag station.

in operator DX,PARK-19-19900604

TM805419 (01.12.2018)

210-05-3

S540, S550, S660, S670, S680 and S690 Combines

Safety

Support Machine Properly

TS229-UN: Support Properly

Always lower the attachment or implement to the ground before youworkonthemachine.Iftheworkrequiresthatthemachineor attachment be lifted, provide secure support for them. If left in a raised position, hydraulically supported devices can settle or leak down.

Do not support the machine on cinder blocks, hollow tiles, or props that may crumble under continuous load. Do not work under a machine that is supported solely by a jack. Follow recommended procedures in this manual.

When implements or attachments are used with a machine, always follow safety precautions listed in the implement or attachment operator′s manual.

DX,LOWER-19-20000224

Wear Protective Clothing

TS206-UN: Protective Clothing

Wear close fitting clothing and safety equipment appropriate to the job.

Prolonged exposure to loud noise can cause impairment or loss of hearing.

Wear a suitable hearing protective device such as earmuffs or earplugs to protect against objectionable or uncomfortable loud noises.

Operating equipment safely requires the full attention of the operator. Do not wear radio or music headphones while operating machine.

DX,WEAR-19-19900910

Protect Against Noise

TS207-UN: Noise Exposure

Prolonged exposure to loud noise can cause impairment or loss of hearing.

Wear a suitable hearing protective device such as earmuffs or earplugs to protect against objectionable or uncomfortable loud noises.

DX,NOISE-19-19930303

Work in Clean Area

T6642EJ-UN: Clean Work Area

Before starting a job:

Clean work area and machine.

Make sure you have all necessary tools to do your job.

Have the right parts on hand.

Read all instructions thoroughly; do not attempt shortcuts.

DX,CLEAN-19-19900604

TM805419 (01.12.2018)

210-05-4

S540, S550, S660, S670, S680 and S690 Combines

For the full PDF version of this manual, Please click on the above download PDF button.

Safety

Work In Ventilated Area

TS220-UN: Engine exhaust fumes

Engine exhaust fumes can cause sickness or death. If it is necessary to run an engine in an enclosed area, remove the exhaust fumes from the area with an exhaust pipe extension.

Ifyoudonothaveanexhaustpipeextension,openthedoorsand get outside air into the area.

DX,AIR-19-19990217

Illuminate Work Area Safely

TS223-UN: Work Area Safely

Illuminate your work area adequately but safely. Use a portable safety light for working inside or under the machine. Make sure the bulb is enclosed by a wire cage. The hot filament of an accidentally broken bulb can ignite spilled fuel or oil.

DX,LIGHT-19-19900604

Service Machines Safely

TS228-UN: Moving Parts

Tie long hair behind your head. Do not wear a necktie, scarf, loose clothing, or necklace when you work near machine tools or moving parts. If these items were to get caught, severe injury could result.

Remove rings and other jewelry to prevent electrical shorts and entanglement in moving parts.

DX,LOOSE-19-19900604

Construct Dealer-Made Tools Safely

LX1016749-UN: Construct Dealer-Made Tools Safely

Faulty or broken tools can result in serious injury. When constructing tools, use proper, quality materials, and good workmanship.

Do not weld tools unless you have the proper equipment and experience to perform the job.

DX,SAFE,TOOLS-19-19971010

TM805419 (01.12.2018)

210-05-5

S540, S550, S660, S670, S680 and S690 Combines

Safety

Service Cooling System Safely

TS281-UN: Cooling System

Explosive release of fluids from pressurized cooling system can cause serious burns.

Shut off engine. Only remove filler cap when cool enough to touch with bare hands. Slowly loosen cap to first stop to relieve pressure before removing completely.

DX,RCAP-19-19900604

Service Accumulator Systems Safely

TS281-UN: Hydraulic Accumulator

Escaping fluid or gas from systems with pressurized accumulators that are used in air conditioning, hydraulic, and air brake systems can cause serious injury. Extreme heat can cause the accumulator to burst, and pressurized lines can be accidentally cut. Do not weld or use a torch near a pressurized accumulator or pressurized line.

Relieve pressure from the pressurized system before removing accumulator.

Relieve pressure from the hydraulic system before removing accumulator. Never attempt to relieve hydraulic system or accumulator pressure by loosening a fitting.

Accumulators cannot be repaired.

DX,WW,ACCLA2-19-20030822

Wait Before Opening High-Pressure TS1343-UN: High-Pressure Fuel Lines High-pressure fluid remaining in fuel lines can cause serious Fuel System injury. Only technicians familiar with this type of system should

perform repairs. Before disconnecting fuel lines, sensors, or any other components between the high-pressure fuel pump and nozzles on engines with High-Pressure Common Rail (HPCR) fuel system, confirm that the fuel pressure is relieved.

DX,WW,HPCR2-19-20140909

Replace Safety Signs

TS201-UN: Safety Signs

Replace missing or damaged safety signs. See the machine operator’s manual for correct safety sign placement.

DX,SIGNS1-19-19900604

TM805419 (01.12.2018)

210-05-6

S540, S550, S660, S670, S680 and S690 Combines

Safety

Use Proper Lifting Equipment

TS226-UN: Proper Lifting Equipment

Lifting heavy components incorrectly can cause severe injury or machine damage.

Follow recommended procedure for removal and installation of components in the manual.

DX,LIFT-19-19900604

Remov e Heatin g

Paint

Before Welding

or Remove paint before heating: Remove paint a minimum of 100 mm (4 in.) from area to be affected by heating. If paint cannot be removed, wear an approved respirator before heating or welding.

If you sand or grind paint, avoid breathing the dust.

Wear an approved respirator.

If you use solvent or paint stripper, remove stripper with soap and water before welding. Remove solvent or paint stripper containers and other flammable material from area. Allow fumes to disperse at least 15 minutes before welding or heating.

Do not use a chlorinated solvent in areas where welding will take place.

TS220-UN: Toxic Fumes

Avoid potentially toxic fumes and dust.

Hazardous fumes can be generated when paint welding, soldering, or using a torch.

is heated by

Do all work in an area that is well ventilated to carry toxic fumes and dust away.

Dispose of paint and solvent properly.

DX,PAINT-19-20020724

TS953-UN: Flammable Spray

Avoid Heating Near Pressurized Fluid Flammable spray can be generated by heating near pressurized Lines fluid lines, resulting in severe burns to yourself and bystanders.

Do not heat by welding, soldering, or using a torch near pressurized fluid lines or other flammable materials. Pressurized lines can accidentally burst when heat goes beyond the immediate flame area.

DX,TORCH-19-20041210

TM805419 (01.12.2018)

210-05-7

S540, S550, S660, S670, S680 and S690 Combines

Safety

Service Tires Safely

TS211-UN: Explosive Tire and Rim Parts

Explosive separation of a tire and rim parts can cause serious injury or death.

Do not attempt to mount a tire unless you have the proper equipment and experience to perform the job.

Always maintain the correct tire pressure. Do not inflate the tires above the recommended pressure. Never weld or heat a wheel and tire assembly. The heat can cause an increase in air pressure resulting in a tire explosion. Welding can structurally weaken or deform the wheel.

Wheninflatingtires,useaclip-onchuckandextensionhoselong enough to allow you to stand to one side and NOT in front of or over the tire assembly. Use a safety cage if available.

Check wheels for low pressure, cuts, bubbles, damaged rims or missing lug bolts and nuts.

DX,RIM-19-19900824

Avoid Harmful Asbestos Dust

Avoid breathing dust that may be generated when handling components containing asbestos fibers. Inhaled asbestos fibers may cause lung cancer.

Components in products that may contain asbestos fibers are brakepads, brakebandandlining assemblies, clutch plates, and somegaskets.Theasbestosusedinthesecomponentsisusually found in a resin or sealed in some way. Normal handling is not hazardous as long as airborne dust containing asbestos is not generated.

Avoid creating dust. Never use compressed air for cleaning.

Avoid brushing or grinding material containing asbestos. When servicing, wear an approved respirator. A special vacuum cleaner is recommended to clean asbestos. If not available, apply a mist of oil or water on the material containing asbestos.

Keep bystanders away from the area.

DX,DUST-19-19910315

TS220-UN: Asbestos Dust

TM805419 (01.12.2018)

210-05-8

S540, S550, S660, S670, S680 and S690 Combines

Safety

Practice Safe Maintenance

TS218-UN: Keep Area Clean

Understand service procedure before doing work. Keep area clean and dry.

Never lubricate, service, or adjust machine while it is moving.

Keep hands, feet, and clothing away from power-driven parts.

Disengage all power and operate controls to relieve pressure.

Lower equipment to the ground. Stop the engine. Remove the key. Allow machine to cool.

Securely support any machine elements that must be raised for service work.

Keep all parts in good condition and properly installed. Fix damage immediately. Replace worn or broken parts. Remove any buildup of grease, oil, or debris.

On self-propelled equipment, disconnect battery ground cable () before making adjustments on electrical systems or welding on machine.

On towed implements, disconnect wiring harnesses from tractor before servicing electrical system components or welding on machine.

Falling while cleaning or working at height can cause serious injury. Use a ladder or platform to easily reach each location. Use sturdy and secure footholds and handholds.

DX,SERV-19-20170228

Use Proper Tools

TS779-UN: Proper Tools

Use tools appropriate to the work. Makeshift tools and procedures can create safety hazards.

Use power tools only to loosen threaded parts and fasteners.

For loosening and tightening hardware, use the correct size tools.

DO NOT use U.S. measurement tools on metric fasteners. Avoid bodily injury caused by slipping wrenches.

Use only service parts meeting John Deere specifications.

DX,REPAIR-19-19990217

and environmental stewardship measures must be taken Decommissioning — Proper Recycling Safety into account when decommissioning a machine and/or and Disposal of Fluids and component. These measures include the following: Components

Use appropriate tools and personal protective equipment such as clothing, gloves, face shields or glasses, during the removal or handling of objects and materials.

Follow instructions for specialized components.

Release stored energy by lowering suspended machine elements, relaxing springs, disconnecting the battery or other electrical power, and releasing pressure in hydraulic components, accumulators, and other similar systems.

Minimize exposure to components which may have residue from agricultural chemicals, such as fertilizers and pesticides. Handle and dispose of these components appropriately.

TS1133-UN: Recycle Waste

TM805419 (01.12.2018)

210-05-9

S540, S550, S660, S670, S680 and S690 Combines

Safety Carefully drain engines, fuel tanks, radiators, hydraulic cylinders, reservoirs, and lines before recycling components. Use leak-proof containers when draining fluids. Do not use food or beverage containers.

Do not pour waste fluids onto the ground, down a drain, or into any water source.

Observe all national, state, and local laws, regulations, or ordinances governing the handling or disposal of waste fluids (example: oil, fuel, coolant, brake fluid); filters; batteries; and, other substances or parts. Burning of flammable fluids or components in other than specially designed incinerators may be prohibited by law and could result in exposure to harmful fumes or ashes.

Live With Safety

Service and dispose of air conditioning systems appropriately. Government regulations may require a certified service center to recover and recycle air conditioning refrigerants which could damage the atmosphere if allowed to escape.

Evaluate recycling options for tires, metal, plastic, glass, rubber, and electronic components which may be recyclable, in part or completely.

Contact your local environmental or recycling center, or your John Deere dealer for information on the proper way to recycle or dispose of waste.

DX,DRAIN-19-20150601

TS231-19: Safety Systems

Before returning machine to customer, make sure machine is functioning properly, especially the safety systems. Install all guards and shields.

DX,LIVE-19-19920925

TM805419 (01.12.2018)

210-05-10

S540, S550, S660, S670, S680 and S690 Combines

Combine and Component Identification

Group 10 Combine and Component Identification Interpreting Machine Serial Number

H105725-UN: Serial Number Description

AX - John Deere Seeding Group BM - John Deere Montenegro CC - John Deere Arc-les-Gray CD - John Deere Usine De Saran CE - John Deere Iberica Getafe CJ - John Deere Nigel CP - John Deere Tianjin Works CQ - John Deere Horizontina DM - John Deere Roberine Enschede DW - John Deere Davenport Works DX - Deere & Company EK - John Deere Orenburg EX - John Deere Ottumwa Works 1Manufacturer CodeFD - DCEO-Mannheim FX - DCEO-Mannheim GX - John Deere Power Products HX - John Deere Harvester Works JX - Industrias John Deere Argentina S.A. JZ - John Deere Domodedovo KM - Kemper KV - Knoxville LG - Mannheim 5x20 LV - John Deere Augusta Works LX - John Deere Werke Mannheim MC - DCEO Parts Marketing MX - John Deere Horicon Works MY - John Deere Sirhind Works

N4 - John Deere Ningbo Works NF - John Deere Tianjin Tractor Co.,Ltd NW - John Deere Catalao NX - John Deere Des Moines Works PC - John Deere Intelligent Solutions Group PX - Industrias John Deere S.A. de C.V. PY - John Deere India Pvt. Ltd RG - John Deere Power Systems RX - John Deere Waterloo Works SA - SABO Gummersbach T8 - John Deere Thibodaux TC - John Deere Turf Care TX - Worldwide Construction And Forestry Division TY - John Deere Merchandise Division WX - John Deere Welland Works WZ - John Deere Fabriek Horst B.V. XJ - Ashok Leyland John Deere Construction Equipment Company, Pvt. Ltd. XU - Xuzhou XCG John Deere Machinery Manufacturing Co., Ltd. YC - John Deere Jiamusi Agricultural Machinery YH - John Deere Harbin Works YN - John Deere Tianjin Construction Works YZ - John Deere Coffeyville Works ZT - JDI GmbH-ISB ZX - John Deere Werke Zweibrucken 9Q - John Deere Water

2Machine Model Identifier Model Identifier Suffix 3Machine Configuration Code Additional Machine Information

Example: N, T, W, etc.

4Check Letter

Example: A, B, C, D, etc.

5Calendar Year of Manufacture

Refer to Year of Manufacture Code table

6Additional Information 7Manufacturing Serial Number

Example: 000001, 000127, etc.

Year of Manufacture Code Year

Code

Year

Code

Year

Code

200

8

201

J

8

9

8

K

202

W

203

8

8

X

8

200

A

201

9

L

202

Y

203

9

B

A

9

M

9

1

9

201

B

C

202

N

203

2

204

C

0

D

0

P

0

3

0

D

201

E

202

R

203

4

204

E

1

F

1

S

1

5

1

F

201

G

202

T

203

6

204

G

2

H

2

V

2

7

2

H

Code Year

201

202

203

204

3

3

3

3

201

202

203

204

4

4

4

4

201

202

203

204

5

5

5

201

202

TM805419 (01.12.2018)

210-10-1

203

5

OUO6075,0001187-19-20120827

S540, S550, S660, S670, S680 and S690 Combines 204

Combine and Component Identification product support program. Also, they are needed for law enforcement to trace your machine if it is ever stolen.

ACCURATELY record these characters in the spaces provided in Your machine has these various identification plates. The letters each of the following photographs. and numbers stamped on these plates identify a component or OUO6075,0000BE0-19-20110504 assembly. ALL of these characters are needed when ordering parts or identifying a machine or component for any John Deere

Identification Numbers

Machine Identification Plate NOTE:

H95295-UN: Sample Identification Plate

H111509-UN: Sample Identification Plate

Machine identification plate varies depending on where machine is shipped. Locate identification plate on machine and compare with information shown here.

OUO6075,0001876-19-20140702

Machine Identification Plate Location

H97568-UN: Machine Identification Plate Location

Located on right-hand side of cab handrail landing.

OUO6075,0000BE1-19-20110504

TM805419 (01.12.2018)

210-10-2

S540, S550, S660, S670, S680 and S690 Combines

Combine and Component Identification

Interpreting Engine Serial Number

R..............Interim Tier 4/Stage III B U or V..............Final Tier 4/Stage IV 123456..............Engine Serial Number

Engine Model Number (B) Model Number Example

6.8 L..............6068HFC09 9.0 L..............6090HFC09 13.5 L..............6135HFC09

H112201-UN: Sample Engine Serial Number Plate

Each engine has a 13 digit John Deere engine serial number identifying the producing factory, engine model designation, and a 6 digit sequential number.

H..............Engine Aspiration

D..............Naturally aspirated T..............Turbocharged A..............Turbocharged and aftercooled, air-tocoolant H..............Turbocharged and aftercooled, air-to-air S..............Turbocharged and aftercooled, air-to-sea water

Engine Serial Number (A) Serial Number Example

6.8 L..............JX6068L123456 9.0 L..............JX6090L123456 13.5 L..............RG6135L123456

F..............User Type

F..............OEM (John Deere Power Systems XX..............Other letters are used to identify John Deere Equipment manufacturing locations

JX..............Factory Code Producing Engine

JX..............Rosario, Santa Fe, Argentina

C..............Industrial

RG..............Waterloo, Iowa, USA

C..............Industrial

6090..............Number of Cylinders and Total Displacement

G..............Gen-Set

6068..............6 Cylinders, 6.8 liters 6090..............6 Cylinders, 9.0 liters 6135..............6 Cylinders, 13.5 liters

09..............Engine Configuration

09..............PSS (Series Turbochargers, DOC/DPF and SCR) 94..............PVX (Single VGT Turbocharger) 95..............PSX (Series Turbochargers and Aftertreatment)

L..............Emission Certification

B..............Non-Certified C..............Tier 1/Stage 1 D..............Tier 2/Stage II L..............Tier 3/Stage III A

OU90500,00005C3-19-20160316

Engine Serial Number

BM004646-UN: S540 and S550 Tier 3/Stage IIIA Engine

H99416-UN: S540 and S550 Non-Emissions Certified Engine

TM805419 (01.12.2018)

210-10-3

S540, S550, S660, S670, S680 and S690 Combines

Combine and Component Identification

H99413-UN: S660 and S670

H99437-UN: S680 and S690

S540andS550:Locatedonrearsideofenginebehindsecondary fuel filter.

S660 and S670: located on rear side of engine.

S680 and S690: located on front side of engine above starting motor.

OU90500,00005C4-19-20160316

Hydrostatic Drive Unit Pump

H99421-UN:on Mechanical and ProDrive Located side ofTransmission hydrostatic driveTransmission pump.

OU90500,0000251-19-20140224

Hydrostatic Drive Unit Motor

H99424-UN: ProDrive™ Transmission

Mechanical Transmission: located on top side of hydrostatic drive motor.

H99420-UN: Mechanical Transmission

ProDrive™ Transmission: located on bottom side of hydrostatic drive motor.

ProDrive is a trademark of Deere & Company OU90500,00005C9-19-20160316

TM805419 (01.12.2018)

210-10-4

S540, S550, S660, S670, S680 and S690 Combines

Combine and Component Identification

Two Speed Four-Wheel Drive Motor

H99419-UN: Two Speed Four-Wheel Drive Motor Identification Plate Location

Located on top side of four-wheel drive motor.

OUO6075,0000AF4-19-20110414

Engine Gearcase

H99418-UN: Engine Gearcase Identification Plate Location

Located on rear side of engine gearcase.

OUO6075,0001057-19-20120227

Rotor Drive Gearcase

H99430-UN: Rotor Drivecase Identification Plate Location

Located on left-hand side of rotor drive gearcase.

OUO6075,0000AF6-19-20101214

Transmission

H99426-UN: ProDrive™ Transmission

Mechanical Transmission: located on side of transmission.

ProDrive™ Transmission: located on front of transmission.

H99422-UN: Mechanical Transmission

TM805419 (01.12.2018)

210-10-5

S540, S550, S660, S670, S680 and S690 Combines

Combine and Component Identification ProDrive is a trademark of Deere & Company

OU90500,00005C6-19-20160316

Feeder House Reverser

H99432-UN: Feeder House Reverser Identification Plate Location

Located on top side of feeder house reverser.

OUO6075,0000AF9-19-20101214

Multi-Speed Feeder House Gearcase, Identification Plate Location Multi-Speed Feeder House Gearcase (If H99431-UN: Located on rear side of multi-speed feeder house gearcase.

Equipped) OUO6075,0000B00-19-20101214

Chopper (If Equipped)

H101339-UN: S660, S670, S680 and S690

Located on left-hand side of chopper.

OU90500,00005C7-19-20160316

H101352-UN: S540 and S550

Chopper Tailboard (Deluxe Residue)

TM805419 (01.12.2018)

210-10-6

S540, S550, S660, S670, S680 and S690 Combines

Combine and Component Identification

H101340-UN: S660, S670, S680 and S690

H101353-UN: S540 and S550

Located on left-hand side of chopper tailboard.

OU90500,00005C8-19-20160316

PowerCast Tailboard (Deluxe Residue)

Located onPowerCast left-hand sideIdentification of PowerCast tailboard.

H101343-UN: Tailboard Plate Location OUO6075,0000C2A-19-20110504

Spreader (Deluxe Residue)

H101344-UN: Spreader Identification Plate Location

Located on right-hand inside of spreader.

OUO6075,0000C2B-19-20110504

G-Valve Block, Assembly, or Gearcase Hydraulic Designators H-Cooler J-Miscellaneous Component The hydraulic designators are used to identify components on M-Motor hydraulic schematics in this manual. In the legend, the O-Orifice designators are shown in alphanumeric order with a brief P-Pump description.Inthecomponentidentificationgroup,designatorsR-Reservoir or Tank are used in conjunction with a description and photograph or S-Switch image. V-Valve ThehydraulicdesignatorsbeginwithaletterthatdescribestheW-Mechanical Assembly device:X-Diagnostic Receptacle or Coupler Y-Solenoid Valve A-AccumulatorZ-Port with Plug B-Sensor or Gauge C-Cylinder, Actuator, or Piston D-Check Valve F-Filter

TM805419 (01.12.2018)

210-10-7

DX,HYD,DES-19-20110425

S540, S550, S660, S670, S680 and S690 Combines

Combine and Component Identification

Hydraulic Circuit Symbols

TM805419 (01.12.2018)

TS700-19: Hydraulic Circuit Symbols

210-10-8

DX,HYSYM-19-19900824

S540, S550, S660, S670, S680 and S690 Combines

General Specifications

Group 15 General Specifications

TM805419 (01.12.2018)

210-15-1

S540, S550, S660, S670, S680 and S690 Combines

General Specifications

CARB Non-road Emissions Control Warranty Statement—Compression Ignition Emissions Control Warranty Statement 2016 through 2018

DXLOGOV1-UN: Logo

CALIFORNIA EMISSIONS CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS To determine if the John Deere engine qualifies for the additional warranties set forth below, look for the ‘Emission Control Information” label located on the engine. If the engine is operated in the United States or Canada and the engine label states: ‘This engine complies with US EPA regulations for nonroad and stationary diesel engines”, or ‘This engine complies with US EPA regulations for stationary emergency diesel engines”, refer to the ‘U.S. and Canada Emission Control Warranty Statement.” If the engine is operated in California, and the engine label states: ‘This engine complies with US EPA and CARB regulations for nonroad diesel engines” also refer to the ‘California Emissions Control Warranty Statement.”

Warranties stated on this certificate refer only to emissions-related parts and components of your engine. The complete engine warranty, less emission-related parts and components, is provided separately. If you have any questions about your warranty rights and responsibilities, you should contact John Deere at 1-319-292-5400.

CALIFORNIA EMISSIONS CONTROL WARRANTY STATEMENT: The California Air Resources Board (CARB) is pleased to explain the emission-control system warranty on 2016 through 2018 off-road diesel engines. In California, new offroad engines must be designed, built and equipped to meet the State’s stringent anti-smog standards. John Deere must warrant the emission control system on your engine for the periods of time listed below provided there has been no abuse, neglect or improper maintenance of your engine.

Your emission control system may include parts such as the fuel injection system and the air induction system. Also included may be hoses, belts, connectors and other emission-related assemblies.

John Deere warrants to the ultimate purchaser and each subsequent purchaser that this off-road diesel engine was designed, built, and equipped so as to conform at the time of sale with all applicable regulations adopted by CARB and is free from defects in materials and workmanship which would cause the failure of a warranted part to be identical in all material respects to the part as described in John Deere′s application for certification for a period of five years from the date the engine is delivered to an ultimate purchaser or 3,000 hours of operation, whichever occurs first for all engines rated at 19 kW and greater. In the absence of a device to measure hours of use, the engine shall be warranted for a period of five years.

EMISSIONS WARRANTY EXCLUSIONS: John Deere may deny warranty claims for failures caused by the use of an add-on or modified part which has not been exempted by the CARB. A modified part is an aftermarket part intended to replace an original emission-related part which is not functionally identical in all respects and which in any way affects emissions. An add-on part is any aftermarket part which is not a modified part or a replacement part.

In no event will John Deere, any authorized engine distributor, dealer, or repair facility, or any company affiliated with John Deere be liable for incidental or consequential damage.

JOHN DEERE′S WARRANTY RESPONSIBILITY: Where a warrantable condition exists, John Deere will repair or replace, as it elects, your off-road diesel engine at no cost to you, including diagnosis, parts or labor. Warranty coverage is subject to the limitations and exclusions set forth herein. The off-road diesel engine is warranted for a period of five years from the date the engine is delivered to an ultimate purchaser or 3,000 hours of operation, whichever occurs first. The following are emissions-related parts: Air Induction System EmissionIntake control labels Particulate Controls manifold

Turbocharger

AdvancedCharge Oxides of air Nitrogen (NOx) Controls Any device used to

cooler

capture particulate emissions SCR systems and urea containers/dispensing systems used in the Any device FuelItems injection Miscellaneous used in Above Systems regeneration of the system capturing system Enclosures and Exhaust Gas Recirculation manifolding EGR valve Smoke Puff Limiters Catalyst or Thermal Reactor Fuel Metering system

NOx absorbers and catalysts Electronic control units, sensors, actuators, wiring harnesses, hoses, connectors, clamps, fittings, gasket, mounting hardware

Positive Crankcase Ventilation (PCV) System

Systems

Catalytic converter Exhaust manifold

TM805419 (01.12.2018)

PCV valve Oil filler cap

210-15-2

S540, S550, S660, S670, S680 and S690 Combines

General Specifications Any warranted emissions-related part scheduled for replacement as required maintenance is warranted by John Deere for the period of time prior to the first scheduled replacement point for the part. Any warranted emissions-related part not scheduled for replacement as required maintenance or scheduled only for regular inspection is warranted by John Deere for the stated warranty period.

OWNER′S WARRANTY RESPONSIBILITIES: As the off-road diesel engine owner you are responsible for the performance of the required maintenance listed in your Operator’s Manual. John Deere recommends that the owner retain all receipts covering maintenance on the off-road diesel engine, but John Deere cannot deny warranty solely for the lack of receipts or for the owner’s failure to ensure the performance of all scheduled maintenance. However, as the off-road diesel engine owner, you should be aware that John Deere may deny you warranty coverage if your off-road diesel engine or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications.

The off-road diesel engine is designed to operate on diesel fuel as specified in the Fuels, Lubricants and Coolants section in the Operators Manual. Use of any other fuel may result in the engine no longer operating in compliance with applicable emissions requirements.

The owner is responsible for initiating the warranty process, and should present the machine to the nearest authorized John Deere dealer as soon as a problem is suspected.

The warranty repairs should be completed by the authorized John Deere dealer as quickly as possible.

Emissions regulations require the customer to bring the unit to an authorized servicing dealer when warranty service is required. As a result, John Deere is NOT liable for travel or mileage on emissions warranty service calls.

Emission_CI_CARB (13Jun14)

RG26035-UN: Emissions Control Warranty Statement 2016 through 2018

TM805419 (01.12.2018)

210-15-3

S540, S550, S660, S670, S680 and S690 Combines

General Specifications

RG26036-UN: Emissions Control Warranty Statement 2016 through 2018

Emissions Control Warranty Statement 2019 through 2021

DXLOGOV1-UN: Logo

CALIFORNIA EMISSIONS CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS To determine if the John Deere engine qualifies for the additional warranties set forth below, look for the ‘Emission Control Information” label located on the engine. If the engine is operated in the United States or Canada and the engine label states: ‘This engine complies with US EPA regulations for nonroad and stationary diesel engines”, or ‘This engine complies with US EPA regulations for stationary emergency diesel engines”, refer to the ‘U.S. and Canada Emission Control Warranty Statement.” If the engine is operated in California, and the engine label states: ‘This engine complies with US EPA and CARB regulations for nonroad diesel engines” also refer to the ‘California Emissions Control Warranty Statement.”

Warranties stated on this certificate refer only to emissions-related parts and components of your engine. The complete engine warranty, less emission-related parts and components, is provided separately. If you have any questions about your warranty rights and responsibilities, you should contact John Deere at 1-319-292-5400.

TM805419 (01.12.2018)

210-15-4

S540, S550, S660, S670, S680 and S690 Combines

General Specifications CALIFORNIA EMISSIONS CONTROL WARRANTY STATEMENT: The California Air Resources Board (CARB) is pleased to explain the emission-control system warranty on 2019 through 2021 off-road diesel engines. In California, new offroad engines must be designed, built and equipped to meet the State’s stringent anti-smog standards. John Deere must warrant the emission control system on your engine for the periods of time listed below provided there has been no abuse, neglect or improper maintenance of your engine.

Your emission control system may include parts such as the fuel injection system and the air induction system. Also included may be hoses, belts, connectors and other emission-related assemblies.

John Deere warrants to the ultimate purchaser and each subsequent purchaser that this off-road diesel engine was designed, built, and equipped so as to conform at the time of sale with all applicable regulations adopted by CARB and is free from defects in materials and workmanship which would cause the failure of a warranted part to be identical in all material respects to the part as described in John Deere′s application for certification for a period of five years from the date the engine is delivered to an ultimate purchaser or 3,000 hours of operation, whichever occurs first for all engines rated at 19 kW and greater. In the absence of a device to measure hours of use, the engine shall be warranted for a period of five years.

EMISSIONS WARRANTY EXCLUSIONS: John Deere may deny warranty claims for failures caused by the use of an add-on or modified part which has not been exempted by the CARB. A modified part is an aftermarket part intended to replace an original emission-related part which is not functionally identical in all respects and which in any way affects emissions. An add-on part is any aftermarket part which is not a modified part or a replacement part.

In no event will John Deere, any authorized engine distributor, dealer, or repair facility, or any company affiliated with John Deere be liable for incidental or consequential damage.

JOHN DEERE′S WARRANTY RESPONSIBILITY: Where a warrantable condition exists, John Deere will repair or replace, as it elects, your off-road diesel engine at no cost to you, including diagnosis, parts or labor. Warranty coverage is subject to the limitations and exclusions set forth herein. The off-road diesel engine is warranted for a period of five years from the date the engine is delivered to an ultimate purchaser or 3,000 hours of operation, whichever occurs first. The following are emissions-related parts: Air Induction System EmissionIntake control labels manifold Particulate Controls

Turbocharger Charge air cooler

Any device used to Advanced Oxides of Nitrogen (NOx) Controls

capture particulate emissions Any device SCR systems and urea containers/dispensing systems used in the FuelItems injection Miscellaneous used in Above Systems regeneration of the system capturing system Enclosures and Exhaust Gas Recirculation manifolding EGR valve Smoke Puff Limiters Catalyst or Thermal Reactor Fuel Metering system

NOx absorbers and catalysts Electronic control units, sensors, actuators, wiring harnesses, hoses, connectors, clamps, fittings, gasket, mounting hardware

Positive Crankcase Ventilation (PCV) System

Systems

Catalytic converter Exhaust manifold

PCV valve Oil filler cap

Any warranted emissions-related part scheduled for replacement as required maintenance is warranted by John Deere for the period of time prior to the first scheduled replacement point for the part. Any warranted emissions-related part not scheduled for replacement as required maintenance or scheduled only for regular inspection is warranted by John Deere for the stated warranty period.

OWNER′S WARRANTY RESPONSIBILITIES: As the off-road diesel engine owner you are responsible for the performance of the required maintenance listed in your Operator’s Manual. John Deere recommends that the owner retain all receipts covering maintenance on the off-road diesel engine, but John Deere cannot deny warranty solely for the lack of receipts or for the owner’s failure to ensure the performance of all scheduled maintenance. However, as the off-road diesel engine owner, you should be aware that John Deere may deny you warranty coverage if your off-road diesel engine or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications.

The off-road diesel engine is designed to operate on diesel fuel as specified in the Fuels, Lubricants and Coolants section in the Operators Manual. Use of any other fuel may result in the engine no longer operating in compliance with applicable emissions requirements.

The owner is responsible for initiating the warranty process, and should present the machine to the nearest authorized John Deere dealer as soon as a problem is suspected.

The warranty repairs should be completed by the authorized John Deere dealer as quickly as possible.

Emissions regulations require the customer to bring the unit to an authorized servicing dealer when warranty service is required. As a result, John Deere is NOT liable for travel or mileage on emissions warranty service calls.

Emission_CI_CARB (01Feb17)

TM805419 (01.12.2018)

210-15-5

S540, S550, S660, S670, S680 and S690 Combines

General Specifications

RG29280-UN: Emissions Control Warranty Statement 2019 through 2021

TM805419 (01.12.2018)

210-15-6

S540, S550, S660, S670, S680 and S690 Combines

General Specifications

RG29281-UN: Emissions Control Warranty Statement 2019 through 2021

TM805419 (01.12.2018)

DX,EMISSIONS,CARB-19-20170203

210-15-7

S540, S550, S660, S670, S680 and S690 Combines

For the full PDF version of this manual, Please click on the above download PDF button.