JOHN DEERE 8370R TRACTORS TM146419 PDF FILE DOWNLOAD

8R Tractors Diagnostic (SN. 120000—; Russia SN. 058001—)

DIAGNOSTIC TECHNICAL MANUAL 8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R, and 8400R Tractors (SN. 120000—; Russia SN. 058001—) TM146419 01DEC18 (ENGLISH)

John Deere Waterloo Works

Introduction Diagnostic technical manuals are comprised of general information, checks, theory of operation, schematic and diagnostic procedures. Sections in a diagnostic technical manual The diagnostic technical manual is written for an experienced help quickly identify the likely cause of routine failures. technician.

Essential tools required to perform certain type of Component sections include images of the component or workareidentifiedinSection300,andarerecommendedforuse.connector and location on the equipment.

Foreword

Live with safety: Read the safety messages in the introduction of The diagnostic technical manual references component manuals this manual and the cautions presented throughout the text.andrepairtechnicalmanuals.Repairtechnicalmanualsare organized for various components requiring service instruction.

CAUTION: Both diagnostic and repair technical manuals are concise guides Thisisthesafety-alertsymbol.Whenthesymbolisshownonthe for specific equipment. They are on-the-job instructions equipment or in a manual, be alert to the potential for personal containing vital information to diagnose, analyze, test, and repair injury.the equipment.

RX33672,000FDAD-19-20161020

TM146419 (01.12.2018)

8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R, and 8400R Tractors

Section 210 - General InformationTrouble Codes (SV3)

Contents

Group 05A - SafetyGroupSV4-SCVIVControlSoftwareDiagnostic Group 05B - General ReferencesTrouble Codes (SV4) Group 05C - References for Technical InformationGroupSV5-SCVVControlSoftwareDiagnostic Group 05D - Diagnostic PhilosophyTrouble Codes (SV5) Group SV6 - SCV VI Control Software Diagnostic

Section 211 - Diagnostic Trouble CodesTrouble Codes (SV6)

Group AIC - Armrest Interface Control Software Group SVJ - Front Hitch SCV Control Software Diagnostic Trouble Codes (AIC)Diagnostic Trouble Codes (SVJ) GroupASU-ActiveSeat™ControlSoftwareDiagnostic Group SVN - Front SCV XIV Control Software Trouble Codes (ASU)Diagnostic Trouble Codes (SVN) Group ATC - Automatic Temperature Control Software Group SVO - Front SCV XV Control Software Diagnostic Trouble Codes (ATC)Diagnostic Trouble Codes (SVO) Group CCU - Chassis Control Software Diagnostic Group TEC-TEI - Tractor Equipment Control Software Trouble Codes (CCU)Diagnostic Trouble Codes (TEC/TEI) Group CLC - Cab Load Center Software Diagnostic Group TII - AutoPowr™ / IVT™ Transmission Shift Trouble Codes (CLC)Control Software Diagnostic Trouble Codes (TII) GroupCRU-RadioSoftwareDiagnosticTroubleCodes Group TIP - Powershift Transmission Shift Control (CRU)Software Diagnostic Trouble Codes (TIP) Group CSC - Cab Suspension Control Software Group VLC - Vehicle Load Center Control Software Diagnostic Trouble Codes (CSC)Diagnostic Trouble Codes (VLC) Group CSM - Cab Switch Module Software Diagnostic Group VTI - Virtual Terminal Implement Control Trouble Codes (CSM)Software Diagnostic Trouble Codes (VTI) Group ECU - Engine Control Software Diagnostic Group VTV - Virtual Terminal Vehicle Control Software Trouble Codes (ECU)Diagnostic Trouble Codes (VTV) Group EIC - Engine Interface Control Software Group XMA - ActiveCommand Steering (ACS™) A Diagnostic Trouble Codes (EIC)BoxMainControlSoftwareDiagnosticTroubleCodes Group FCC - Front Console Control Software (XMA) Diagnostic Trouble Codes (FCC)GroupXMB-ActiveCommandSteering(ACS™)BGroupHCC-HitchControlSoftwareDiagnosticTrouble Box Main Control Software Diagnostic Trouble Codes Codes (HCC)(XMB) Group HV1 - Hitch Valve Software Diagnostic Trouble Group XMC - AutoTrac™ Main Control Software Codes (HV1)Diagnostic Trouble Codes (XMC) Group ICA - Vehicle Security Control Software Group XSA - ActiveCommand Steering (ACS™) A Diagnostic Trouble Codes (ICA)BoxSupervisorControlSoftwareDiagnosticTroubleCodes Group JDL - JDLink™ Software Diagnostic Trouble (XSA) Codes (JDL)GroupXSB-ActiveCommandSteering(ACS™)BGroup OIC - Operator Interface Control Software Box Supervisor Control Software Diagnostic Trouble Codes Diagnostic Trouble Codes (OIC)(XSB) Group PDU - Primary Display Software Diagnostic Group XSC - AutoTrac™ Supervisor Control Software Trouble Codes (PDU)Diagnostic Trouble Codes (XSC) Group PTF - Front PTO Control Software Diagnostic

Trouble Codes (PTF)Section212-ObservableSymptomand GroupPTI-AutoPowr™/IVT™TransmissionControlSystem Diagnostics

Software Diagnostic Trouble Codes (PTI)Group 05 - General References GroupPTP_23SPD-e23™TransmissionControlGroup 30 - Fuel, Air Intake, Exhaust, and Cooling Software Diagnostic Trouble Codes (PTP)Group 40 - Electrical GroupPTP_16SPD-16-SpeedPowershiftGroup 45 - Electronic Control Units TransmissionControlSoftwareDiagnosticTroubleCodesGroup 50A - AutoPowr™ / IVT™ Transmission (PTP)Group 50B - e23™ Transmission GroupRLC-RoofLightingControlSoftwareDiagnostic Group 50C - 16 - Speed Powershift Transmission Trouble Codes (RLC)(PST) GroupRPT-RearPTOControlSoftwareDiagnosticGroup 50D - Drivetrain Trouble Codes (RPT)Group 60A - Brakes GroupSCC-SCVControlSoftwareDiagnosticTroubleGroup 60B - Steering Codes (SCC)Group 70 - Hydraulics GroupSCO-SecondaryHydraulicControlSoftwareGroup 80 - Suspension Diagnostic Trouble Codes (SCO)Group 90 - Operator Station Group SFA - Suspended Front Axle Control Software

Diagnostic Trouble Codes (SFA)Section 220 - Engine

GroupSV1-SCVIControlSoftwareDiagnosticTroubleGroup 05 - General Information Codes (SV1)Group 20 - Theory of Operation GroupSV2-SCVIIControlSoftwareDiagnosticGroup 50 - Diagnostic Tests and Adjustments Trouble Codes (SV2)

Group SV3 - SCV III Control Software Diagnostic Section 229 - Engine Component

TM146419 (01.12.2018)

8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R, and 8400R Tractors

InformationGroup 50F - Engine Control Unit Tests

Group 05 - General InformationGroup50G-4100and4600ProcessorControlUnit Group 40 - Engine Component LocationTests Group 50H - Front Chassis Control Unit Tests

Section230-Fuel,AirIntake,Exhaust,andGroup 50J - Rear Chassis Control Unit Tests CoolingGroup 50K - Roof Control Unit Tests

Group 05 - General InformationGroup 50L - Steering Control Unit Tests Group 20 - Theory of OperationGroupAIC-ArmrestInterfaceControlSoftware Group 30 - SchematicAddresses (AIC) Group ASU - ActiveSeat™ Control Software Addresses

Section 239 - Fuel, Air Intake, Exhaust, and (ASU) Cooling Component InformationGroupATC-AutomaticTemperatureControlSoftware Group 05 - General InformationAddresses (ATC) Group 40A - Fuel, Air Intake and Exhaust System Group CCU - Chassis Control Software Addresses Component Location(CCU) Group 40B - Cooling System Component LocationGroupCLC-CabLoadCenterSoftwareAddresses (CLC)

Section 240 - ElectricalGroup CRU - Radio Control Software (CRU) Group 05 - General InformationGroupCSC-CabSuspensionControlSoftware Group 20 - TheoryAddresses (CSC) Group 30 - Electrical System Wiring DiagramsGroupCSM-CabSwitchModuleSoftwareAddresses Group 50AA - Starting and Charging(CSM) Group 50BA - Road LightingGroupECU-EngineControlSoftwareAddresses Group 50BB - Field Lighting(ECU) Group 50BC - Interior LightingGroupEIC-EngineInterfaceControlSoftware Group 50CA - ActiveSeat™Addresses (EIC) Group 50CB - Standard and Heated SeatGroupFCC-FrontConsoleControlSoftware Group 50DA - Audible AlertsAddresses (FCC) Group 50DB - Windshield WipersGroupHCC-HitchControlSoftwareAddresses Group 50DC - Operator Station(HCC) Group 50DE - Remote MirrorsGroupHV1-HitchValveSoftwareAddresses Group 50DF - Radio(HV1) Group 50EA - Accessory Power ConnectorsGroupICA-VehicleSecurityControlSoftware Group 50FA - AutoPowr™ / IVT™ TransmissionAddresses (ICA) Group 50FB - e23™ TransmissionGroup JDL - JDLink™ Software Addresses (JDL) Group 50FC -16-Speed Powershift Transmission Group OIC - Operator Interface Control Software Group 50GA - Differential LockAddresses (OIC) Group 50GB - MFWDGroupPDU-PrimaryDisplaySoftwareAddresses Group 50GC - PTO(PDU) Group 50GD - Front PTOGroupPTF-FrontPTOControlSoftwareAddresses Group 50HA - Engines(PTF) Group50IA-GreenStar™DisplayandImplementCAN Group PTI - AutoPowr™ / IVT™ Transmission Control BusSoftware Addresses (PTI) Group 50IB - AMS TechnologyGroupPTP-23SPD-e23™TransmissionControl Group 50JA - Rear SCV ` s and Rear HitchSoftware Addresses (PTP) Group 50JB - Front Hitch and Front SCV ` sGroupPTP-16SPD-16-SpeedPowershift Group 50KA - Suspended Front AxleTransmission Control Software Addresses (PTP) Group 50KB - Cab SuspensionGroupRLC-RoofLightingControlSoftwareAddresses Group 50LA - Trailer Brakes(RLC) Group 50LB - Secondary BrakesGroupRPT-RearPTOControlSoftwareAddresses Group 50LC - Front Brakes(RPT) Group 50MA - HVAC (Automatic)GroupSCC-SCVControlSoftwareAddresses Group 50NA - Steering(SCC) Group 50OA - Controller Area Network (CAN)GroupSCO-SecondaryHydraulicControlSoftware Addresses (SCO)

Section 245 - Electronic Control UnitsGroupSFA-SuspendedFrontAxleControlSoftware Addresses (SFA) Group 05 - General Information Group 10 - Interactive Tests and Calibrations (SV1) Group 30 - Control Unit Schematics Group 50A - Armrest Control Unit Tests (SV2) Group 50B - Automatic Temperature Control Unit Tests (SV3) Group 50C - Cab Control Unit Tests Group 50D - Generation 4 CommandCenter™ Control (SV4) Unit Tests Group 50E - Corner Post Display Control Unit (SV5) Tests

TM146419 (01.12.2018)

Group SV1 - SCV I Control Software Addresses Group SV2 - SCV II Control Software Addresses Group SV3 - SCV III Control Software Addresses Group SV4 - SCV IV Control Software Addresses Group SV5 - SCV V Control Software Addresses

8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R, and 8400R Tractors

Group SV6 - SCV VI Control Software Addresses Section 250C - 16 - Speed PowerShift (SV6)Transmission (PST) GroupSVJ-FrontHitchSCVControlSoftwareGroup 05 - General Information Addresses (SVJ)Group 10 - Operational and Preliminary Checks GroupSVN-FrontSCVXIVControlSoftwareGroup 20 - Theory of Operation Addresses (SVN)Group 30 - Schematic GroupSVO-FrontSCVXVControlSoftwareGroup 50 - Diagnostic Tests and Adjustments Addresses (SVO) Group TEC-TEI - Tractor Equipment Control Software

Section 250D - Drivetrain

Addresses (TEC/TEI) Group 05 - General Information Group TII - AutoPowr™ / IVT™ Transmission Shift Control Software Addresses (TII) Preliminary Checks Group TIP - Powershift Transmission Shift Control Software Addresses (TIP) Operation Group VLC - Vehicle Load Center Control Software Group 30A - Axles and Differential Lock Schematic Addresses (VLC) Group VTI - Virtual Terminal Implement Control Tests and Adjustments Software Addresses (VTI) Group VTV - Virtual Terminal Vehicle Control Software Checks Addresses (VTV) Group 20B - MFWD Theory of Operation Group XMA - ActiveCommand Steering (ACS™) A Group 30B - MFWD Schematic Box Main Control Software Addresses (XMA) Group XMB - ActiveCommand Steering (ACS™) B Adjustments Box Main Control Software Addresses (XMB) Group XMC - AutoTrac™ Main Control Software Checks Addresses (XMC) Group 20C - PTO Theory of Operation Group XSA - ActiveCommand Steering (ACS™) A Group 30C - PTO Schematic Box Supervisor Control Software Addresses (XSA) Group XSB - ActiveCommand Steering (ACS™) B Adjustments Box Supervisor Control Software Addresses (XSB) Group XSC - AutoTrac™ Supervisor Control Software

Group 10A - Axles and Differential Lock Operation and Group 20A - Axles and Differential Lock Theory of

Group 50A - Axles and Differential Lock Diagnostic Group 10B - MFWD Operation and Preliminary

Group 50B - MFWD Diagnostic Tests and Group 10C - PTO Operation and Preliminary

Group 50C - PTO Diagnostic Tests and

Section 259 - Drivetrain Component Addresses (XSC)

Information

Group 05 - General Information

Section 249 - Electrical Component Information Components

Group Information Components Group 05 40B- General - e23™ Transmission Group 40A - Electrical Assemblies Group 40B - Sensors (PST) Components Group 40C - Condensors/Capacitors Group 40D - Drivetrain Components Group 40E - Lights Group 40F - Fuses

Group 40A - AutoPowr™ / IVT™ Transmission

Group 40C - 16 - Speed PowerShift Transmission

Section 260A - Brakes

Group 40G - Charging Group 05 - General Information Group 40H - Monitoring Devices Group 10 - Operational and Preliminary Checks Group 40K - Relays Group 20 - Theory of Operations Group 40M - Motors Group 30 - Schematic Group 40S - Switches Group 50 - Diagnostic Tests and Adjustments Group 40V - Diodes Group 40W - Wiring Harnesses

Section 260B - Steering

Group 40X - Interconnects and Ground Points Group 05 - General Information Group 40Y - Electronically Actuated Mechanical Group 10 - Operational and Preliminary Checks Devices Group 20 - Theory of Operation Group 30 - Schematic

Section 250A - AutoPowr™ / IVT™ Group 50 - Diagnostic Tests and Adjustments Transmission TM146419 (01.12.2018) Group 05 - General Information

8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R, and 8400R Tractors

Section279-HydraulicsComponentGroup 20A - HVAC System Theory of Operation InformationGroup 30A - HVAC - Schematic Group 40 - Hydraulic ComponentsAdjustments

Section 280 - SuspensionChecks

Group 05 - General InformationGroup50A-HVACDiagnosticTestsand Group 10B - Seat Operational and Preliminary

Group 05 - General InformationGroup 20B - Seat Theory of Operation Group10A-SuspendedFrontAxle-OperationalandGroup 30B - Seat Schematic Preliminary ChecksGroup50B-SeatDiagnosticTestsand Group 20A - Suspended Front Axle - Theory of Adjustments Operation

Group 30A - Suspended Front Axle SchematicSection299-CabandOpenOperator`s Group50A-SuspendedFrontAxle-DiagnosticTestsStation Component Information

and AdjustmentsGroup 05 - General Information Group 10B - Cab Suspension - Operational and Group 40 - Cab and Open Operator ` s Station Preliminary ChecksComponents Group 20B - Cab Suspension - Theory of

OperationSection 300 - Tools

Group 30B - Cab Suspension SchematicGroup 05 - General Information Group50B-CabSuspension-DiagnosticTestsandGroup 05A - Dealer Fabricated Tools Adjustments Group 30 - Fuel, Air Intake, Exhaust, and Cooling Install Test Equipment

Section 289 - Suspension Component Group 50A - AutoPowr™ / IVT™ Transmission - Install InformationTest Equipment Group 40 - Suspension ComponentsEquipment

Group 05 - General InformationGroup50B-e23™Transmission-InstallTest Group 50C - 16 - Speed PowerShift Transmission

Section290-CabandOpenOperator`s(PST) - Install Test Equipment StationGroup 70 - Hydraulics - Install Test Equipment

Group 05 - General InformationGroup 80 - Suspension - Install Test Equipment Group 10A - HVAC Operational and Preliminary Group 90 - Cab and Open Operator ` s Station - Install ChecksTest Equipment

TM146419 (01.12.2018)

8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R, and 8400R Tractors

Section 210 Contents

General Information Page

Page

Group 05A - Safety Recognize Safety Information...............................210-05A-1 Understand Signal Words......................................210-05A-1 Follow Safety Instructions......................................210-05A-1 Wear Protective Clothing.......................................210-05A-2 Service Machines Safely.......................................210-05A-2 Stay Clear of Rotating Drivelines...........................210-05A-2 Handle Fluids Safely - Avoid Fires........................210-05A-2 Prevent Battery Explosions...................................210-05A-3 Prepare for Emergencies.......................................210-05A-3 Remove Paint Before Welding or Heating.............210-05A-3 Avoid Heating Near Pressurized Fluid Lines.........210-05A-4 Handle Starting Fluid Safely..................................210-05A-4 In Case of Fire.......................................................210-05A-4 Avoid Static Electricity Risk When Refueling.........210-05A-5 Avoid Hot Exhaust.................................................210-05A-5 Clean Exhaust Filter Safely...................................210-05A-5 Prevent Acid Burns................................................210-05A-6 Handle Agricultural Chemicals Safely...................210-05A-7 Clean Vehicle of Hazardous Pesticides.................210-05A-7 Handling Batteries Safely......................................210-05A-8 Avoid Harmful Asbestos Dust................................210-05A-8 Decommissioning - Proper Recycling and Disposal 210-05A-9 of Fluids and Components.............................

Avoid High - Pressure Fluids.................................210-05A-9 Wait Before Opening High - Pressure Fuel 210-05A-10 System...........................................................

Diesel Exhaust Fluid (DEF) - Use in Selective 210-05A-10 Catalytic Reduction (SCR) Equipped Engines..........................................................

Disposal of Diesel Exhaust Fluid (DEF)................210-05A-10 Refilling Diesel Exhaust Fluid (DEF) Tank.............210-05A-10 Storing Diesel Exhaust Fluid (DEF).......................210-05A-11 Testing Diesel Exhaust Fluid (DEF).......................210-05A-11 Service Accumulator Systems Safely....................210-05A-12

TM146419 (01.12.2018)

210-1

Protect Against High Pressure Spray....................210-05A-12 Service Cooling System Safely.............................210-05A-12 Prevent Machine Runaway...................................210-05A-13 Keep ROPS Installed Properly..............................210-05A-13 Avoid Backover Accidents.....................................210-05A-13 Park Machine Safely.............................................210-05A-13 Support Machine Properly.....................................210-05A-14 Work in Clean Area...............................................210-05A-14 Work In Ventilated Area.........................................210-05A-14 Illuminate Work Area Safely..................................210-05A-14 Use Proper Lifting Equipment...............................210-05A-15 Service Tires Safely...............................................210-05A-15 Instructional Seat...................................................210-05A-15 Service Front - Wheel Drive Tractor Safely...........210-05A-16 Use Steps and Handholds Correctly.....................210-05A-16 Transport Tractor Safely........................................210-05A-16 Practice Safe Maintenance...................................210-05A-17 Use Proper Tools...................................................210-05A-17 Construct Dealer - Made Tools Safely...................210-05A-17 Replace Safety Signs............................................210-05A-18 Install All Guards...................................................210-05A-18 Live With Safety....................................................210-05A-18 Group 05B - General References Trademarks........................................................... 210-05B-1 Information Available in Sections, Groups and 210-05B-2 Subgroups......................................................

Regions and Countries..........................................210-05B-3 Group 05C - References for Technical Information Metric Bolt and Screw Torque Values....................210-05C-1 Unified Inch Bolt and Screw Torque Values..........210-05C-2 Group 05D - Diagnostic Philosophy Basic Diagnostic Philosophy.................................210-05D-1 Systematic Diagnostic Approach Overview...........210-05D-3

8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R, and 8400R Tractors

For the full PDF version of this manual, Please click on the above download PDF button.

Safety

Group 05A Safety Recognize Safety Information

T81389-UN: Safety-alert symbol

This is a safety-alert symbol. When you see this symbol on your machine or in this manual, be alert to the potential for personal injury.

Follow recommended precautions and safe operating practices.

DX,ALERT-19-19980929

Understand Signal Words

DANGER ; The signal word DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING ; The signal word WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION ; The signal word CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. CAUTION may also be used to alert against unsafe practices associated with events which could lead to personal injury.

TS187-19: Signal Words

A signal word—DANGER, WARNING, or CAUTION—is used withthesafety-alertsymbol.DANGERidentifiesthemostserious hazards. DANGER or WARNING safety signs are located near specific hazards. General precautions are listed on CAUTION safetysigns.CAUTIONalsocallsattentiontosafetymessagesin this manual.

DX,SIGNAL-19-20161005

Follow Safety Instructions

Carefully read all safety messages in this manual and on your machine safety signs. Keep safety signs in good condition.

Replace missing or damaged safety signs. Be sure new equipment components and repair parts include the current safety signs. Replacement safety signs are available from your John Deere dealer.

Therecanbeadditionalsafetyinformationcontainedonpartsand components sourced from suppliers that is not reproduced in this operator′s manual.

Learn how to operate the machine and how to use controls properly. Do not let anyone operate without instruction.

Keep your machine in proper working condition.

TS201-UN: Safety Messages

Unauthorized modifications to the machine may impair the function and/or safety and affect machine life.

If you do not understand any part of this manual and need assistance, contact your John Deere dealer.

DX,READ-19-20090616

TM146419 (01.12.2018)

210-05A-1

8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R, and 8400R Tractors

Safety

Wear Protective Clothing

TS206-UN: Protective Clothing

Wear close fitting clothing and safety equipment appropriate to the job.

Prolonged exposure to loud noise can cause impairment or loss of hearing.

Wear a suitable hearing protective device such as earmuffs or earplugs to protect against objectionable or uncomfortable loud noises.

Operating equipment safely requires the full attention of the operator. Do not wear radio or music headphones while operating machine.

DX,WEAR-19-19900910

Service Machines Safely

TS228-UN: Moving Parts

Tie long hair behind your head. Do not wear a necktie, scarf, loose clothing, or necklace when you work near machine tools or moving parts. If these items were to get caught, severe injury could result.

Remove rings and other jewelry to prevent electrical shorts and entanglement in moving parts.

DX,LOOSE-19-19900604

Stay Clear of Rotating Drivelines

TS1644-UN: Rotating Drivelines

Entanglement in rotating driveline can cause serious injury or death.

Keep all shields in place at all times. Make sure rotating shields turn freely.

Wear close-fitting clothing. Stop the engine and be sure that all rotating parts and drivelines are stopped before making adjustments, connections, or performing any type of service on engine or machine driven equipment.

DX,ROTATING-19-20090818

Handle Fluids Safely—Avoid Fires

TS227-UN: Avoid Fires

When you work around fuel, do not smoke or work near heaters or other fire hazards.

Store flammable fluids away from fire hazards. Do not incinerate or puncture pressurized containers.

Make sure machine is clean of trash, grease, and debris.

Do not store oily rags; they can ignite and burn spontaneously.

DX,FLAME-19-19980929

TM146419 (01.12.2018)

210-05A-2

8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R, and 8400R Tractors