JOHN DEERE 8225R TRACTORS TM146319 REPAIR MANUAL

8R Tractors Repair (SN. 120000—)

REPAIR TECHNICAL MANUAL 8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R and 8400R Tractors (SN. 120000—) TM146319 01DEC18 (ENGLISH)

John Deere Waterloo Works

Introduction Operation and Test Technical Manual helps you quickly identify

Foreword the majority of failures.

This manual is written for an experienced technician. Essential Information is organized in groups for the various components and recommended tools required in performing certain service requiring service instruction. At the beginning of each group are work are identified in this manual.summarylistingsofallapplicableessentialandrecommended tools, other material needed to do the job, service parts kits, Livewithsafety:Readthesafetymessagesintheintroductionofspecifications, wear tolerances, and torque values. this manual and the cautions presented throughout the text of the manual. Technical manuals are concise guides for specific machines.

They are on-the-job guides containing only the vital information needed for diagnosis, analysis, testing, and repair.

CAUTION: Fundamental service information is available from other sources This is the safety-alert symbol. When you see this symbol on the covering basic theory of operation, fundamentals of machine or in this manual, be alert to the potential for personal troubleshooting, general maintenance, and basic type of failures injury.and their causes.

Technical manuals are used to provide service information. The Repair Technical Manual tells how to repair the components. The

RX,TMIFC-19-19960403

Dealer Predelivery Information Formcertainpredeliveryservicesthatmustbeperformedbythedealer.

These services are listed on the predelivery form with the tractor.

The John Deere Predelivery Form, when properly filled out and Perform all services listed and check each job off as it is signedbydealer,verifiespredeliveryanddeliveryserviceswerecompleted. Fill form out completely and sign it. satisfactorily performed.OURX113,0000002-19-20010418 Because of the shipping factors involved, plus extra finishing touches necessary to promote customer satisfaction, there are

TM146319 (01.12.2018)

8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R and 8400R Tractors

Section 10 - General InformationGroup 15 - Differential

Contents

Group 05A - SafetyGroup 20 - Input Gear Train Group 05B - General ReferencesGroup 25 - Oscillation

Section 20 - EngineSection 50F - 1500 Series MFWD Group 00 - Component Removal and InstallationGroup 00 - Component Removal And Installation Group 05 - Engine RepairGroup 05 - Final Drives Group 10 - Axle Housing

Section30-Fuel,AirIntake,Exhaust,andGroup 15 - Differential CoolingGroup 20 - Input Gear Train Group 05 - Diesel Fuel SystemGroup 25 - Oscillation Group 10 - Air Intake System

Group 15 - Auxiliary Drive SystemSection50G-IndependentLinkSuspension Group 20 - Radiator and Coolers(ILS™) Group 25 - Exhaust SystemGroup 00 - Component Removal And Installation Group 05 - Final Drives

Section 40 - ElectricalGroup 10 - Driveshafts

Group 05 - ConnectorsGroup 15 - Differential Group 10 - Charging CircuitGroup 20 - Suspension Components Group 15 - Starting CircuitGroup 25 - Steering Group20-Relays,Fuses,Solenoids,andGroup 30 - Front Brakes Switches

Group 25 - Monitoring SystemSection 60A - Brakes

Group 30 - CommandARM™Group 05 - Service Brakes Group 35 - Implement and Accessory ConnectorsGroup 10 - Air Trailer Brakes Group 40 - Convenience and Accessory

Section 60B - Steering Section50A-InfinitelyVariableGroup 05 - Steering Column Transmission (IVT™)Group 10 - Steering Valves

Group 00 - Component Removal and InstallationGroup 15 - Steering Cylinders Group 05 - In Tractor Repair

Group 10 - Transmission RepairSection 70 - Hydraulics

Group 15 - Assemble TransmissionGroup 00 - Component Removal and Installation Group 05 - Hydraulic System

Section 50B - e23™ Transmission (e23™)Group 10 - Integrated Hydraulic Pump

Group 00 - Component Removal and InstallationGroup15-HitchValve,SelectiveControlValves,and Group 05 - In Tractor RepairCouplers Group 10 - Transmission RepairGroup 20 - Rear Hitch Group 15 - Assemble TransmissionGroup 25 - Front Hitch

Section50C-16-SpeedPowerShiftSection 80 - Miscellaneous Transmission (PST)Group 05 - Hood and Side Panels

Group 00 - Component Removal and InstallationGroup 10 - Wagon and Pick - Up Hitch Group 05 - In Tractor Repair

Group 10 - Transmission RepairSection90-CabandOpenOperator`s Group 15 - Assemble TransmissionStation Group 00 - Component Removal and Installation

Section 50D - Drive TrainGroup05-Heating,Ventilating,andAirConditioning

Group 00 - Component Removal and Installation(HVAC) Group 05 - Hydraulic Pump DriveGroup 10 - ComfortCommand™ Seat Group 10 - Rear Differential and Input QuillGroup15-ComfortCommand™SeatwithHCS Group 15 - Rear Final DrivesPlus Group 20 - Rear PTOGroup 20 - ActiveSeat™ Group 25 - Front PTOGroup 25 - Cab Door and Windshield Group 30 - Cab Suspension

Section 50E - 1300 Series MFWD Group 00 - Component Removal And InstallationSection 300 - Dealer Tools Group 05 - Final DrivesGroup 05 - Dealer Fabricated Tools Group 10 - Axle Housing

TM146319 (01.12.2018)

8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R and 8400R Tractors

Section 10 Contents

General Information Page

Page

Practice Safe Maintenance...................................10-05A-15 Use Proper Tools...................................................10-05A-15 Construct Dealer - Made Tools Safely...................10-05A-15 Decommissioning - Proper Recycling and Disposal 10-05A-16 of Fluids and Components.............................

Install All Guards...................................................10-05A-16 Live With Safety....................................................10-05A-16

Group 05A - Safety Recognize Safety Information...............................10-05A-1 Understand Signal Words......................................10-05A-1 Follow Safety Instructions......................................10-05A-1 Prevent Machine Runaway....................................10-05A-2 Avoid Backover Accidents.....................................10-05A-2 Handle Fluids Safely - Avoid Fires........................10-05A-2

Group 05B - General References List of References.................................................10-05B-1 Trademarks........................................................... 10-05B-2

Prevent Battery Explosions...................................10-05A-2 Prepare for Emergencies.......................................10-05A-3 Handling Batteries Safely......................................10-05A-3 Handle Agricultural Chemicals Safely...................10-05A-4

Sealants and Adhesives Cross - Reference 10-05B-3 Chart..............................................................

Park Machine Safely..............................................10-05A-4 Support Machine Properly.....................................10-05A-5 Wear Protective Clothing.......................................10-05A-5

Metric Bolt and Screw Torque Values....................10-05B-4 Unified Inch Bolt and Screw Torque Values..........10-05B-5 Face Seal Fittings Assembly and Installation - All 10-05B-5 Pressure Applications....................................

Metric Face Seal And O - ring Stud End Fitting 10-05B-7 Torque Chart - Standard Pressures...............

Work in Clean Area...............................................10-05A-5 Clean Vehicle of Hazardous Pesticides.................10-05A-5 Service Machines Safely.......................................10-05A-6

Metric Face Seal and O - ring Stud End Fitting 10-05B-8 Torque Chart - High Pressure Applications....

SAE Face Seal and O - ring Stud End Fitting 10-05B-9 Torque Chart - Standard Pressures...............

Stay Clear of Rotating Drivelines...........................10-05A-6 Work In Ventilated Area.........................................10-05A-6 Illuminate Work Area Safely..................................10-05A-6 Replace Safety Signs............................................10-05A-7 Use Proper Lifting Equipment................................10-05A-7 Wait Before Opening High - Pressure Fuel 10-05A-7 System...........................................................

Service Accumulator Systems Safely....................10-05A-7

SAE Face Seal and O - ring Stud End Fitting 10-05B-10 Torque Chart - High Pressure Applications....

FourBoltFlangeFittingsAssemblyandInstallation 10-05B-10

Protect Against High Pressure Spray....................10-05A-8 Service Cooling System Safely.............................10-05A-8 Avoid High - Pressure Fluids.................................10-05A-8 Remove Paint Before Welding or Heating.............10-05A-9 Avoid Heating Near Pressurized Fluid Lines.........10-05A-9 Handle Starting Fluid Safely..................................10-05A-9 In Case of Fire.......................................................10-05A-10 Avoid Static Electricity Risk When Refueling.........10-05A-10 Avoid Hot Exhaust.................................................10-05A-11 Clean Exhaust Filter Safely...................................10-05A-11 Prevent Acid Burns................................................10-05A-12 Keep ROPS Installed Properly..............................10-05A-12 Instructional Seat...................................................10-05A-12 Use Steps and Handholds Correctly.....................10-05A-13 Service Front - Wheel Drive Tractor Safely...........10-05A-13 Transport Tractor Safely........................................10-05A-13 Follow Tire Recommendations..............................10-05A-13 Service Tires Safely...............................................10-05A-14 Avoid Harmful Asbestos Dust................................10-05A-14

TM146319 (01.12.2018)

10-1

- All Pressure Applications.............................

SAE Four Bolt Flange Cap Screw Torque Values - 10-05B-11 Standard Pressure Applications.....................

SAE Four Bolt Flange Cap Screw Torque Values - 10-05B-12 High Pressure Applications............................

External Hexagon Port Plug Torque Chart............10-05B-13 Prevent Hydraulic System Contamination.............10-05B-13 Check Oil Lines and Fittings..................................10-05B-13 BasicElectricalComponentHandling/Precautions 10-05B-14 For Vehicles Equipped With Computer Controlled Systems........................................

Identify Zinc - Flake Coated Fasteners.................10-05B-14 Use Torque Wrench Adapter.................................10-05B-15 Servicing and Connecting Snap to Connect STC™ 10-05B-16 Fittings............................................................

Use Special Wrench..............................................10-05B-16 Install Hydraulic Fittings........................................10-05B-17 Glossary of Terms.................................................10-05B-18 Aftertreatment Indicators Overview.......................10-05B-20 Changing Diesel Exhaust Fluid (DEF) Dosing Unit 10-05B-22 Filter...............................................................

Cleaning Diesel Exhaust Fluid (DEF) Tank...........10-05B-22

8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R and 8400R Tractors

Safety

Group 05A Safety Recognize Safety Information

T81389-UN: Safety-alert symbol

This is a safety-alert symbol. When you see this symbol on your machine or in this manual, be alert to the potential for personal injury.

Follow recommended precautions and safe operating practices.

DX,ALERT-19-19980929

Understand Signal Words

DANGER ; The signal word DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING ; The signal word WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION ; The signal word CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. CAUTION may also be used to alert against unsafe practices associated with events which could lead to personal injury.

TS187-19: Signal Words

A signal word—DANGER, WARNING, or CAUTION—is used withthesafety-alertsymbol.DANGERidentifiesthemostserious hazards. DANGER or WARNING safety signs are located near specific hazards. General precautions are listed on CAUTION safetysigns.CAUTIONalsocallsattentiontosafetymessagesin this manual.

DX,SIGNAL-19-20161005

Follow Safety Instructions

Carefully read all safety messages in this manual and on your machine safety signs. Keep safety signs in good condition.

Replace missing or damaged safety signs. Be sure new equipment components and repair parts include the current safety signs. Replacement safety signs are available from your John Deere dealer.

Therecanbeadditionalsafetyinformationcontainedonpartsand components sourced from suppliers that isnot reproduced in this operator′s manual.

Learn how to operate the machine and how to use controls properly. Do not let anyone operate without instruction.

Keep your machine in proper working condition. Unauthorized modifications to the machine may impair the function and/or safety and affect machine life.

TS201-UN: Safety Messages

If you do not understand any part of this manual and need assistance, contact your John Deere dealer.

DX,READ-19-20090616

TM146319 (01.12.2018)

10-05A-1

8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R and 8400R Tractors

For the full PDF version of this manual, Please click on the above download PDF button.

Safety

Prevent Machine Runaway

TS177-UN: Machinery Runaway

Avoid possible injury or death from machinery runaway.

Do not start engine by shorting across starter terminals. Machine will start in gear if normal circuitry is bypassed.

NEVER start engine while standing on ground. Start engine only from operator’s seat, with transmission in neutral or park.

DX,BYPAS1-19-19980929

Avoid Backover Accidents

PC10857XW-UN: Avoid Backover Accidents

Before moving machine, be sure that all persons are clear of machine path. Turn around and look directly for best visibility. Use a signal person when backing if view is obstructed or when in close quarters.

Do not rely on a camera to determine if personnel or obstacles are behind the machine. The system can be limited by many factors including maintenance practices, environmental conditions, and operating range.

DX,AVOID,BACKOVER,ACCIDENTS-19-20100830

Handle Fluids Safely—Avoid Fires

TS227-UN: Avoid Fires

When you work around fuel, do not smoke or work near heaters or other fire hazards.

Store flammable fluids away from fire hazards. Do not incinerate or puncture pressurized containers.

Make sure machine is clean of trash, grease, and debris.

Do not store oily rags; they can ignite and burn spontaneously.

DX,FLAME-19-19980929

Prevent Battery Explosions

TS204-UN: Battery Explosions

Keep sparks, lighted matches, and open flame away from the top of battery. Battery gas can explode.

Never check battery charge by placing a metal object across the posts. Use a volt-meter or hydrometer.

Do not charge a frozen battery; it may explode. Warm battery to 16°C (60°F).

DX,SPARKS-19-19930303

TM146319 (01.12.2018)

10-05A-2

8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R and 8400R Tractors

Safety

Prepare for Emergencies

TS291-UN: First Aid Kit

Be prepared if a fire starts.

Keep a first aid kit and fire extinguisher handy.

Keep emergency numbers for doctors, ambulance service, hospital, and fire department near your telephone.

DX,FIRE2-19-19930303

Handling Batteries Safely

TS203-UN: Caution

Battery gas can explode. Keep sparks and flames away from batteries. Use a flashlight to check battery electrolyte level.

Never check battery charge by placing a metal object across the posts. Use a voltmeter or hydrometer.

Always remove grounded (-) battery clamp first and replace grounded clamp last.

Sulfuric acid in battery electrolyte is poisonous and strong enough to burn skin, eat holes in clothing, and cause blindness if splashed into eyes.

Avoid hazards by:

Filling batteries in a well-ventilated area Wearing eye protection and rubber gloves Avoiding use of air pressure to clean batteries Avoiding breathing fumes when electrolyte is added Avoiding spilling or dripping electrolyte Using correct battery booster or charger procedure.

TS204-UN: Caution

If acid is spilled on skin or in eyes:

Flush skin with water.

Apply baking soda or lime to help neutralize the acid.

Flush eyes with water for 15—30 minutes. Get medical attention immediately.

If acid is swallowed:

Do not induce vomiting.

Drink large amounts of water or milk, but do not exceed 2 L (2 qt.).

Get medical attention immediately.

Battery posts, terminals, and related accessories WARNING: contain lead and lead compounds, chemicals known to the State of California cause cancer and reproductive harm. Wash hands afterto handling.

DX,WW,BATTERIES-19-20101202

TM146319 (01.12.2018)

10-05A-3

8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R and 8400R Tractors

Safety

Handle Agricultural Chemicals Safely

Reduce risk of exposure and injury:

Wear appropriate personal protective equipment as recommended by the manufacturer. In the absence of manufacturer′s instructions, follow these general guidelines: Chemicals labeled ′Danger′ : Most toxic. Generally require use of goggles, respirator, gloves, and skin protection.

Chemicals labeled ′Warning′ : Less toxic. Generally require use of goggles, gloves, and skin protections.

Chemicals labeled ′Caution′ : Least toxic. Generally require use of gloves and skin protection.

Avoid inhaling vapor, aerosol or dust.

Always have soap, water, and towel available when working with chemicals. If chemical contacts skin, hands, or face, wash immediately with soap and water. If chemical gets into eyes, flush immediately with water.

Wash hands and face after using chemicals and before eating, drinking, smoking, or urination.

Do not smoke or eat while applying chemicals.

After handling chemicals, always bathe or shower and change clothes. Wash clothing before wearing again.

Seek medical attention immediately if illness occurs during or shortly after use of chemicals.

Keep chemicals in original containers. Do not transfer chemicals to unmarked containers or to containers used for food or drink.

Store chemicals in a secure, locked area away from human or livestock food. Keep children away.

Always dispose of containers properly. Triple rinse empty containers and puncture or crush containers and dispose of properly.

TS220-UN: Safety

A34471-UN: Safety

Chemicals used in agricultural applications such as fungicides, herbicides, insecticides, pesticides, rodenticides, and fertilizers can be harmful to your health or the environment if not used carefully.

Always follow all label directions for effective, safe, and legal use of agricultural chemicals.

DX,WW,CHEM01-19-20100824

Park Machine Safely

TS230-UN: Remove the Key

Before working on the machine:

Lower all equipment to the ground.

Stop the engine and remove the key.

Disconnect the battery ground strap.

Hang a "DO NOT OPERATE" tag station.

in operator DX,PARK-19-19900604

TM146319 (01.12.2018)

10-05A-4

8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R and 8400R Tractors

Safety

Support Machine Properly

TS229-UN: Support Properly

Always lower the attachment or implement to the ground before youworkonthemachine.Iftheworkrequiresthatthemachineor attachment be lifted, provide secure support for them. If left in a raised position, hydraulically supported devices can settle or leak down.

Do not support the machine on cinder blocks, hollow tiles, or props that may crumble under continuous load. Do not work under a machine that is supported solely by a jack. Follow recommended procedures in this manual.

When implements or attachments are used with a machine, always follow safety precautions listed in the implement or attachment operator′s manual.

DX,LOWER-19-20000224

Wear Protective Clothing

TS206-UN: Protective Clothing

Wear close fitting clothing and safety equipment appropriate to the job.

Prolonged exposure to loud noise can cause impairment or loss of hearing.

Wear a suitable hearing protective device such as earmuffs or earplugs to protect against objectionable or uncomfortable loud noises.

Operating equipment safely requires the full attention of the operator. Do not wear radio or music headphones while operating machine.

DX,WEAR-19-19900910

Work in Clean Area

T6642EJ-UN: Clean Work Area

Before starting a job:

Clean work area and machine.

Make sure you have all necessary tools to do your job.

Have the right parts on hand.

Read all instructions thoroughly; do not attempt shortcuts.

DX,CLEAN-19-19900604

Clean Vehicle of Hazardous Pesticides

When exposed to hazardous pesticides, clean exterior and interior of vehicle daily to keep free of the accumulation of visible dirt and contamination.

1.Sweep or vacuum the floor of cab.

CAUTION: During application of hazardous pesticides, pesticide residue can build up on the inside or outside of the vehicle. Clean vehicle according to use instructions of hazardous pesticides.

2.Clean headliners and inside cowlings of cab.

3.Wash entire exterior of vehicle.

4. Dispose of any wash water with hazardous concentrations of active or non-active ingredients according to published regulations or directives.

DX,CABS2-19-20010724

TM146319 (01.12.2018)

10-05A-5

8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R and 8400R Tractors

Safety

Service Machines Safely

TS228-UN: Moving Parts

Tie long hair behind your head. Do not wear a necktie, scarf, loose clothing, or necklace when you work near machine tools or moving parts. If these items were to get caught, severe injury could result.

Remove rings and other jewelry to prevent electrical shorts and entanglement in moving parts.

DX,LOOSE-19-19900604

Stay Clear of Rotating Drivelines

TS1644-UN: Rotating Drivelines

Entanglement in rotating driveline can cause serious injury or death.

Keep all shields in place at all times. Make sure rotating shields turn freely.

Wear close-fitting clothing. Stop the engine and be sure that all rotating parts and drivelines are stopped before making adjustments, connections, or performing any type of service on engine or machine driven equipment.

DX,ROTATING-19-20090818

Work In Ventilated Area

TS220-UN: Engine exhaust fumes

Engine exhaust fumes can cause sickness or death. If it is necessary to run an engine in an enclosed area, remove the exhaust fumes from the area with an exhaust pipe extension.

Ifyoudonothaveanexhaustpipeextension,openthedoorsand get outside air into the area.

DX,AIR-19-19990217

Illuminate Work Area Safely

TS223-UN: Work Area Safely

Illuminate your work area adequately but safely. Use a portable safety light for working inside or under the machine. Make sure the bulb is enclosed by a wire cage. The hot filament of an accidentally broken bulb can ignite spilled fuel or oil.

DX,LIGHT-19-19900604

TM146319 (01.12.2018)

10-05A-6

8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R and 8400R Tractors

Safety

Replace Safety Signs

TS201-UN: Safety Signs

Replace missing or damaged safety signs. See the machine operator’s manual for correct safety sign placement.

DX,SIGNS1-19-19900604

Use Proper Lifting Equipment

TS226-UN: Proper Lifting Equipment

Lifting heavy components incorrectly can cause severe injury or machine damage.

Follow recommended procedure for removal and installation of components in the manual.

DX,LIFT-19-19900604

Wait Before Fuel System

Opening

High-Pressure TS1343-UN: High-Pressure Fuel Lines

High-pressure fluid remaining in fuel lines can cause serious injury. Only technicians familiar with this type of system should perform repairs. Before disconnecting fuel lines, sensors, or any other components between the high-pressure fuel pump and nozzles on engines with High-Pressure Common Rail (HPCR) fuel system, confirm that the fuel pressure is relieved.

DX,WW,HPCR2-19-20140909

Service Accumulator Systems Safely

TS281-UN: Hydraulic Accumulator

Escaping fluid or gas from pressurized hydraulic accumulator systems can cause serious injury. Extreme heat can cause the accumulator to burst, and pressurized lines can be accidentally cut. Do not weld or use a torch near a pressurized accumulator or pressurized line.

Relieve pressure from the hydraulic system before removing accumulator. Never attempt to relieve hydraulic system or accumulator pressure by loosening a fitting.

Accumulators cannot be repaired.

DX,WW,ACCLA-19-20030415

TM146319 (01.12.2018)

10-05A-7

8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R and 8400R Tractors

Safety

Protect Against High Pressure Spray

TS1343-UN: High Pressure Spray

Spray from high pressure nozzles can penetrate the skin and cause serious injury. Keep spray from contacting hands or body.

If an accident occurs, see a doctor immediately. Any high pressure spray injected into the skin must be surgically removed within a few hours or gangrene may result. Doctors unfamiliar with this type of injury should reference a knowledgeable medical source. Such information is available from Deere & Company Medical Department in Moline, Illinois, U.S.A. DX,SPRAY-19-19920416

Service Cooling System Safely

TS281-UN: Cooling System

Explosive release of fluids from pressurized cooling system can cause serious burns.

Shut off engine. Only remove filler cap when cool enough to touch with bare hands. Slowly loosen cap to first stop to relieve pressure before removing completely.

DX,WW,COOLING-19-20090819

Replace worn or damaged hose assemblies immediately with John Deere approved replacement parts.

Avoid High-Pressure Fluids

Escaping fluid under pressure can penetrate the skin causing serious injury.

Avoid the hazard by relieving pressure before disconnecting hydraulic or other lines. Tighten all connections before applying pressure.

Search for leaks with a piece of cardboard. Protect hands and body from high-pressure fluids.

If an accident occurs, see a doctor immediately. Any fluid

X9811-UN: High Pressure

Inspect hydraulic hoses periodically–at least once per year–for leakage, kinking, cuts, cracks, abrasion, blisters, corrosion, exposed wire braid or any other signs of wear or damage.

TM146319 (01.12.2018)

injected into the skin must be surgically removed within a few hours or gangrene may result. Doctors unfamiliar with this type of injury should reference a knowledgeable medical source. Such information is available in English from Deere & Company Medical Department in Moline, Illinois, U.S.A., by calling 1-800-822-8262 or +1 309-748-5636.

10-05A-8

DX,FLUID-19-20111012

8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R and 8400R Tractors

Safety

Remove Heating

Paint

Before Welding

or Remove paint before heating: Remove paint a minimum of 100 mm (4 in.) from area to be affected by heating. If paint cannot be removed, wear an approved respirator before heating or welding.

If you sand or grind paint, avoid breathing the dust.

Wear an approved respirator.

If you use solvent or paint stripper, remove stripper with soap and water before welding. Remove solvent or paint stripper containers and other flammable material from area. Allow fumes to disperse at least 15 minutes before welding or heating.

Do not use a chlorinated solvent in areas where welding will take place.

TS220-UN: Toxic Fumes

Avoid potentially toxic fumes and dust.

Hazardous fumes can be generated when paint welding, soldering, or using a torch.

is heated by

Do all work in an area that is well ventilated to carry toxic fumes and dust away.

Dispose of paint and solvent properly.

DX,PAINT-19-20020724

Avoid Heating Near Pressurized Fluid Flammable spray can be generated by heating near pressurized Lines fluid lines, resulting in severe burns to yourself and bystanders.

TS953-UN: Flammable Spray

Do not heat by welding, soldering, or using a torch near pressurized fluid lines or other flammable materials. Pressurized lines can accidentally burst when heat goes beyond the immediate flame area.

DX,TORCH-19-20041210

Handle Starting Fluid Safely

TS1356-UN: Store Safely

Starting fluid is highly flammable.

Keep all sparks and flame away when using it. Keep starting fluid away from batteries and cables.

To prevent accidental discharge when storing the pressurized can, keep the cap on the container, and store in a cool, protected location.

Do not incinerate or puncture a starting fluid container.

Do not use starting fluid on an engine equipped with glow plugs or an air intake heater.

DX,FIRE3-19-20140314

TM146319 (01.12.2018)

10-05A-9

8225R, 8245R, 8270R, 8295R, 8320R, 8335R, 8345R, 8370R and 8400R Tractors

For the full PDF version of this manual, Please click on the above download PDF button.